Adapter WM-Bus / Kampstrup Multical 21
-
Hallo
In dem Logfile steht leider nichts gutes:
pi@raspberrypi4:/var/log/wmbusmeters $ more wmbusmeters.log (wmbusmeters) logging started 2021-07-13 22:40:08 using _ (wmbusmeters) logging started 2021-07-13 23:12:55 using _ [2021-07-13_23:12:56] Started config im871a[00100776] on /dev/ttyUSB0 listening on none [2021-07-13_23:12:56] Warning! Desired link modes none cannot be set for device /dev/ttyUSB0:im871a[00100776] (wmbusmeters) waiting for telegrams [2021-07-13_23:12:58] (memory) rss 2048000 peak 1.95 MiB [2021-07-14_00:12:56] [ALARM DeviceInactivity] 3600 seconds of inactivity resetting /dev/ttyUSB0 im871a (timeout 3600s expected mon-s un(00-23) now 2021-07-14 00:12) [2021-07-14_00:12:56] (shell) /bin/sh exited with non-zero return code: 127 [2021-07-14_00:12:56] (wmbus) resetting /dev/ttyUSB0 [2021-07-14_00:12:59] (wmbus) successfully reset wmbus device [2021-07-14_01:12:56] [ALARM DeviceInactivity] 3600 seconds of inactivity resetting /dev/ttyUSB0 im871a (timeout 3600s expected mon-s un(00-23) now 2021-07-14 01:12) [2021-07-14_01:12:56] (shell) /bin/sh exited with non-zero return code: 127 [2021-07-14_01:12:56] (wmbus) resetting /dev/ttyUSB0 [2021-07-14_01:12:59] (wmbus) successfully reset wmbus device [2021-07-14_02:12:56] [ALARM DeviceInactivity] 3600 seconds of inactivity resetting /dev/ttyUSB0 im871a (timeout 3600s expected mon-s un(00-23) now 2021-07-14 02:12) -
@wolfgangfb said in Adapter WM-Bus / Kampstrup Multical 21:
Warning! Desired link modes none cannot be set for device /dev/ttyUSB0:im871a[00100776]
Dieses Warning ist komisch!? Ich habe bei mir die Datagramme im T1-Mode.
Dann müsste in der /etc/wmbusmeters.conf
die Zeile so stehen:
device=/dev/ttyUSB0:im871a:t1
ggfs. kann man hinten das :t1 weglassen - müsste man versuchen.Dann ist noch wichtig, den AES-Key hier zu hinterlegen:
/etc/wmbusmeters.d/MyTapWater
key=xxxxxxxxxxxxxxxxxxxViel Glück
-
@matze-dev
Die Warning ist jetzt zumindest weg, mal sehn ob innerhalb der nächsten Stunde was ankommt.(wmbusmeters) shutting down (wmbusmeters) logging started 2021-07-14 16:46:20 using _ [2021-07-14_16:46:20] Started config im871a[00100776] on /dev/ttyUSB0 listening on t1 (wmbusmeters) waiting for telegrams [2021-07-14_16:46:22] (memory) rss 1953792 peak 1.86 MiB pi@raspberrypi4:/var/log/wmbusmeters $ -
@wolfgangfb einfach die Daten mitlesen
tail -f /var/log/wmbusmeters/wmbusmeters.logViel Glück
-
da kommt nichts
pi@raspberrypi4:/var/log/wmbusmeters $ tail -f /var/log/wmbusmeters/wmbusmeters.log [2021-07-14_16:13:00] (wmbus) successfully reset wmbus device (wmbusmeters) shutting down (wmbusmeters) logging started 2021-07-14 16:46:20 using _ [2021-07-14_16:46:20] Started config im871a[00100776] on /dev/ttyUSB0 listening on t1 (wmbusmeters) waiting for telegrams [2021-07-14_16:46:22] (memory) rss 1953792 peak 1.86 MiB [2021-07-14_17:46:20] [ALARM DeviceInactivity] 3600 seconds of inactivity resetting /dev/ttyUSB0 im871a (timeout 3600s expected mon-sun(00-23) now 2021-07-14 17:46) [2021-07-14_17:46:20] (shell) /bin/sh exited with non-zero return code: 127 [2021-07-14_17:46:20] (wmbus) resetting /dev/ttyUSB0 [2021-07-14_17:46:23] (wmbus) successfully reset wmbus device -
@wolfgangfb ja, da scheint nichts anzukommen. Ausserdem macht er ein Reset. Das ist ungewöhnlich.
Was sagt denn
journalctl -f
dmesg? -
pi@raspberrypi4:/var/log/wmbusmeters $ journalctl -f -- Logs begin at Thu 2019-02-14 11:11:59 CET. -- Jul 14 19:48:06 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:06 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:07 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:07 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:08 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:09 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:10 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:10 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:10 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:12 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:12 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:13 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:13 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:14 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:15 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:16 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:17 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:17 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:18 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:18 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:18 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:19 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84) Jul 14 19:48:19 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)demesg [204619.514651] Bluetooth: hci0: Frame reassembly failed (-84) [204620.459730] Bluetooth: hci0: Frame reassembly failed (-84) [204620.930504] Bluetooth: hci0: Frame reassembly failed (-84) [204620.953443] Bluetooth: hci0: Frame reassembly failed (-84) [204621.105377] Bluetooth: hci0: Frame reassembly failed (-84) [204622.176851] Bluetooth: hci0: Frame reassembly failed (-84) [204622.275958] Bluetooth: hci0: Frame reassembly failed (-84) [204622.470953] Bluetooth: hci0: Frame reassembly failed (-84) [204622.830382] Bluetooth: hci0: Frame reassembly failed (-84) [204623.600358] Bluetooth: hci0: Frame reassembly failed (-84) [204624.175987] Bluetooth: hci0: Frame reassembly failed (-84) [204625.402258] Bluetooth: hci0: Frame reassembly failed (-84) [204627.417943] Bluetooth: hci0: Frame reassembly failed (-84) -
@wolfgangfb würde vorschlagen, den Stick einmal ziehen und dann wieder stecken. Dabei dmesg laufen lassen. Was erzeugt er für Meldungen?
-
[208168.253155] usb 1-1.1: USB disconnect, device number 3 [208168.253617] cp210x ttyUSB0: failed set request 0x12 status: -19 [208168.253640] cp210x ttyUSB0: failed set request 0x0 status: -19 [208168.254215] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [208168.254736] cp210x 1-1.1:1.0: device disconnected [208168.408590] Bluetooth: hci0: Frame reassembly failed (-84) [208168.426653] Bluetooth: hci0: Frame reassembly failed (-84) [208169.204104] Bluetooth: hci0: Frame reassembly failed (-84) [208170.015942] Bluetooth: hci0: Frame reassembly failed (-84) [208170.212190] Bluetooth: hci0: Frame reassembly failed (-84) [208170.281565] Bluetooth: hci0: Frame reassembly failed (-84) [208170.603152] usb 1-1.1: new full-speed USB device number 7 using xhci_hcd [208170.612186] Bluetooth: hci0: Frame reassembly failed (-84) [208170.741010] usb 1-1.1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 [208170.741028] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [208170.741041] usb 1-1.1: Product: WiMOD iM871A-usb [208170.741053] usb 1-1.1: Manufacturer: Silicon Labs [208170.741065] usb 1-1.1: SerialNumber: 00919907 [208170.747222] cp210x 1-1.1:1.0: cp210x converter detected [208170.755693] usb 1-1.1: cp210x converter now attached to ttyUSB0 [[2021-07-14_20:48:38] Lost /dev/ttyUSB0 closing im871a[00100776] No wmbus device detected, waiting for a device to be plugged in. [2021-07-14_20:48:38] [ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not working [2021-07-14_20:48:38] (shell) /bin/sh exited with non-zero return code: 127 [2021-07-14_20:48:40] Started config im871a[00100776] on /dev/ttyUSB0 listening on t1 (wmbusmeters) shutting down (wmbusmeters) logging started 2021-07-14 20:50:06 using _ [2021-07-14_20:50:06] Started config im871a[00100776] on /dev/ttyUSB0 listening on t1 (wmbusmeters) waiting for telegrams [2021-07-14_20:50:08] (memory) rss 1929216 peak 1.83 MiB -
@wolfgangfb bei mir sieht dmesg so aus:
und beim journalctl:
-
Ich habe jetzt nochmal eine jungfräuliche SD Karte genommen, ein neues Image installiert
pi@raspberrypi:~ $ lsb_release -a No LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: bustermosqutto installiert
sudo apt-get install mosquittopi@raspberrypi:~ $ apt policy mosquitto mosquitto: Installiert: 1.5.7-1+deb10u1 Installationskandidat: 1.5.7-1+deb10u1 Versionstabelle: *** 1.5.7-1+deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages 100 /var/lib/dpkg/statusund den wmbusmeters aus den Quellen installiert
pi@raspberrypi:~ $ more /etc/wmbusmeters.conf loglevel=debug device=/dev/ttyUSB0:im871a:t1 logtelegrams=true format=json meterfiles=/var/log/wmbusmeters/meter_readings meterfilesaction=append meterfilesnaming=name meterfilestimestamp=day logfile=/var/log/wmbusmeters/wmbusmeters.log shell=/usr/local/bin/mosquitto_pub -d -h localhost -t wmbusmeters/$METER_ID -m "$METER_JSON" alarmshell=/usr/local/bin/mosquitto_pub -d -h localhost -t wmbusmeters_alarm -m "$ALARM_TYPE $ALARM_MESSAGE" alarmtimeout=1h alarmexpectedactivity=mon-sun(00-23)pi@raspberrypi:~ $ more /etc/wmbusmeters.d/MyTapWater name=MyTapWater type=multical21 id=57813696 key=E4E7EAF6FD17EAFB9587BC2996783C63pi@raspberrypi:~ $ sudo systemctl status wmbusmeters ● wmbusmeters.service - "wmbusmeters service" Loaded: loaded (/lib/systemd/system/wmbusmeters.service; disabled; vendor preset: enabled) Active: active (running) since Sat 2021-07-17 16:14:49 CEST; 9min ago Docs: https://github.com/weetmuts/wmbusmeters man:wmbusmeters(1) Process: 2774 ExecStartPre=/bin/mkdir -p /var/log/wmbusmeters/meter_readings (code=exited, status=0/SUCCESS) Process: 2775 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /var/log/wmbusmeters (code=exited, status=0/SUCCESS) Process: 2776 ExecStartPre=/bin/mkdir -p /run/wmbusmeters (code=exited, status=0/SUCCESS) Process: 2777 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /run/wmbusmeters (code=exited, status=0/SUCCESS) Process: 2778 ExecStart=/usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid (code=exited, status=0/SUCCESS) Main PID: 2779 (wmbusmetersd) Tasks: 3 (limit: 4915) CGroup: /system.slice/wmbusmeters.service └─2779 /usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) "alarmshell" "/usr/local/bin/mosquitto_pub -d -h localhost -t w Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) "alarmtimeout" "1h" Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) "alarmexpectedactivity" "mon-sun(00-23)" Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) "" "" Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) loading meter file /etc/wmbusmeters.d/MyTapWater Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) name=MyTapWater Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) type=multical21 Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) id=57813696 Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) key=<notprinted> Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (wmbusmeters) using log file /var/log/wmbusmeters/wmbusmeters.log pi@raspberrypi:~ $pi@raspberrypi:~ $ more /var/log/wmbusmeters/wmbusmeters.log (serial) stopping manager (serial) EVENT thread interrupted (serial) event loop stopped! (serial) TIMER thread interrupted (wmbusmeters) shutting down (wmbusmeters) logging started 2021-07-17 16:31:43 using _ (wmbusmeters) version: _ (config) store meter files in: "/var/log/wmbusmeters/meter_readings" (config) using device: /dev/ttyUSB0:im871a:t1 (config) number of meters: 1 [2021-07-17_16:31:43] [ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not working (shell) exec "/bin/sh" (shell) arg "-c" (shell) arg "/usr/local/bin/mosquitto_pub -d -h localhost -t wmbusmeters_alarm -m "$ALARM_TYPE $ALARM_MESSAGE"" (shell) env "ALARM_TYPE=SpecifiedDeviceNotFound" (shell) env "ALARM_MESSAGE=[ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not working" (shell) waiting for child 7033 to complete. (shell) /bin/sh: return code 127 [2021-07-17_16:31:44] (shell) /bin/sh exited with non-zero return code: 127 (serial) EVENT thread interrupted No wmbus device detected, waiting for a device to be plugged in. (shell) exec (capture output) "/bin/pidof" (shell) arg "wmbusmetersd" (shell) output: >>>7030 <<< (serial) EVENT thread interrupted (shell) return code 0 (shell) 7035 exited (shell) exec (capture output) "/bin/pidof" (shell) arg "wmbusmeters" (shell) output: >>>652 <<< (serial) EVENT thread interrupted (shell) return code 0 (shell) 7036 exited Notice! Other wmbusmeters (pid 652) is running and it might hog any wmbus devices. (serial) registered regular callback HOT_PLUG_DETECTOR(0) every 2 seconds (wmbusmeters) waiting for telegrams (serial) waiting for stop (serial) EVENT thread interrupted (serial) TIMER thread interrupted [2021-07-17_16:31:46] (memory) rss 2818048 peak 2.68 MiB pi@raspberrypi:~ $Hier sieht es für mich so aus, als ob der USB Stick nicht erkannt wird. Muss man da evtl. einen Treiber installieren?
pi@raspberrypi:~ $ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP2102/CP2109 UART Bridge Controller [CP210x family] Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub pi@raspberrypi:~ $ ls -l /dev/serial/by-id insgesamt 0 lrwxrwxrwx 1 root root 13 Jul 17 16:06 usb-Silicon_Labs_WiMOD_iM871A-usb_00919907-if00-port0 -> ../../ttyUSB0 pi@raspberrypi:~ $ -
@wolfgangfb hallo, gibt's die Datei /etc/wmbusmeters.d/MyTapWater, wie oben beschrieben?
-
Ja, habe ich ja mit
more /etc/wmbusmeters.d/MyTapWaterangezeigt, dann muss es sie ja auch geben.
Darin sehe ich aber nichts was mir die Meldung im wmbusmeters.log (DeviceNotFound) erklären würde.Wie sieht den Dein wmbusmeters.log aus?
-
@wolfgangfb sind da auch der Key drin und die Zähler ID?
-
@matze-dev
Das muss in der MyTapWater stehenname=MyTapWater
type=multical21
id=##der Name/ID des Zaehlers ##
key=##hier den Key eintragen - kommt aus der zugeschickten XML-Datei des Wasserversorgers## -
Ja, habe ich doch in meinem Beitrag alles gequoted (incl. Key weil ich nicht denke, dass damit irgend jemand etwas anfangen kann). Fünfter Codeblock.
-
@wolfgangfb ok, habe es gesehen.
-
Ich denke das Entscheidende ist die Zeile
[2021-07-17_16:31:43] [ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not workingaus
more /var/log/wmbusmeters/wmbusmeters.logCodeblock 7
-
@wolfgangfb ja, das hätte ich auch als nächstes angemerkt.
-
@matze-dev
Muss man da irgendeinen Treiber installieren?
