UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@negalein sagte in iob diag - Skript:

Danke.
Ist zwar nicht Thema des Threads, aber da solltest du ran:

Pending OS-Updates: 50

Das läuft dir wieder weg und nachher wird es bei so einem großen Berg an Updates nur schwieriger die einzuspielen. Davon ganz abgesehen, das die mit Sicherheit aus Gründen released worden sind.

[Negalein]

@thomas-braun sagte in iob diag - Skript:

Pending OS-Updates: 50

I know.
Ist für morgen geplant. War etwas Stress in letzter Zeit.
Machs normal wöchentlich.

[Thomas Braun]

Nochmal die Bitte um Testergebnisse:

Werden Multiusersysteme mit

iobroker status all | grep MULTIHOSTSERVICE/enabled

erkannt?
Auf einem Single-Host sieht es jedenfalls so aus:

echad@chet:~ $ iobroker status all | grep MULTIHOSTSERVICE/enabled
MULTIHOSTSERVICE/enabled: false

Ändert sich der Eintrag auf true beim Master und beim Slave?

[wendy2702]

@thomas-braun habe zwei Slaves, in der Ausgabe kommt aber nichts davon

mirko@iobroker:~$ iobroker status all | grep MULTIHOSTSERVICE/enabled
mirko@iobroker:~$

[Thomas Braun]

@wendy2702 Hm, okay.
Und der Master sagt?

[wendy2702]

@thomas-braun das ist die Ausgabe vom master.

Oder was genau willst du sehen?

[Thomas Braun]

@wendy2702

Komisch. Ich hätte da jetzt sowas wie

MULTIHOSTSERVICE/enabled: true

erwartet...

iobroker status all

spuckt auch nix aus?

[wendy2702]

@thomas-braun kommt das mit „Fehlern“ !?

 iob status all
iobroker is running on this host.


Instance "admin.0" is running
Instance "admin.1" is running
Instance "admin.2" is not running
Instance "daswetter.0" is not running
Instance "dwd.0" is not running
Instance "email.0" is running
Instance "enigma2.0" is running
Instance "feiertage.0" is not running
Instance "flot.0" is not running
Instance "fritzbox.0" is running
Instance "harmony.0" is running
Instance "history.0" is running
Instance "hm-rega.0" is running
Instance "hm-rpc.0" is running
Instance "hm-rpc.1" is running
Instance "hm-rpc.2" is running
Instance "hue.0" is running
Instance "ical.0" is not running
Instance "ical.1" is not running
Instance "ical.2" is not running
Instance "icons-addictive-flavour-png.0" is not running
Instance "icons-fatcow-hosting.0" is not running
Instance "icons-icons8.0" is not running
Instance "icons-material-png.0" is not running
Instance "icons-material-svg.0" is not running
Instance "icons-mfd-png.0" is not running
Instance "icons-mfd-svg.0" is not running
Instance "icons-open-icon-library-png.0" is not running
Instance "icons-ultimate-png.0" is not running
Instance "javascript.0" is running
Instance "javascript.1" is running
Instance "javascript.2" is running
Instance "js2fs.0" is not running
Instance "modbus.0" is running
Instance "modbus.2" is running
Instance "modbus.3" is running
Instance "modbus.4" is not running
Instance "musiccast.0" is not running
Instance "nut.0" is not running
Instance "ping.0" is running
Instance "rpi2.0" is not running
Instance "rpi2.1" is not running
Instance "sayit.0" is running
Instance "simple-api.0" is running
Instance "smartmeter.0" is running
Instance "tankerkoenig.0" is running
Instance "telegram.0" is running
Instance "tr-064.0" is not running
Instance "vis-bars.0" is not running
Instance "vis-canvas-gauges.0" is not running
Instance "vis-colorpicker.0" is not running
Instance "vis-fancyswitch.0" is not running
Instance "vis-google-fonts.0" is not running
Instance "vis-hqwidgets.0" is not running
Instance "vis-jqui-mfd.0" is not running
Instance "vis-justgage.0" is not running
Instance "vis-keyboard.0" is not running
Instance "vis-metro.0" is not running
Instance "vis-plumb.0" is not running
Instance "vis-rgraph.0" is not running
Instance "vis-timeandweather.0" is not running
Instance "vis.0" is not running
Instance "weatherunderground.0" is not running
Instance "web.0" is running
Instance "yahka.0" is running
Instance "yahka.1" is running
Instance "yamaha.0" is running
Instance "yr.0" is not running
Instance "yahka.2" is running
Instance "trashschedule.0" is running
Instance "vis-material-webfont.0" is not running
Instance "vis-materialdesign.0" is not running
Instance "vis-material.0" is not running
Instance "influxdb.0" is running
Instance "vis-inventwo.0" is running
Instance "vis-icontwo.0" is not running
Instance "yahka.3" is not running
Instance "homeconnect.0" is not running
Instance "hue-extended.0" is not running
Instance "linux-control.0" is running
Instance "yahka.4" is running
Instance "socketio.0" is running
Instance "birthdays.0" is not running
Instance "birthdays.1" is not running
Instance "pushover.0" is not running
Instance "alias-manager.0" is not running
Instance "discovery.0" is not running
Instance "net-tools.0" is not running
Instance "sayit.1" is not running
Instance "modbus.5" is running
Instance "enocean.0" is running
Instance "modbus.1" is running
Instance "shuttercontrol.0" is running
Instance "energiefluss.0" is running
Instance "ws.0" is running
Instance "web.1" is running
Instance "backitup.0" is not running
Instance "modbus.6" is not running
Instance "shelly.0" is running
Instance "sourceanalytix.0" is running
Instance "roborock.0" is not running
Instance "vis-2-beta.0" is running
Instance "vis-2-widgets-material.0" is not running
Instance "vis-2-widgets-energy.0" is not running
Instance "vis-2-widgets-gauges.0" is not running
Instance "smartstate.0" is running
Instance "smartmeter.1" is not running
Instance "energiefluss.1" is not running

NETWORK/IPv4: true
NETWORK/IPv6: true
NETWORK/useSystemNpm: true
OBJECTS/type: jsonl
OBJECTS/host: 0.0.0.0
OBJECTS/port: 9001
OBJECTS/user:
OBJECTS/pass:
OBJECTS/noFileCache: true
OBJECTS/connectTimeout: 5000
OBJECTS/OPTIONS/retryStrategy: reconnectCount => {
            if (!ready && initError && ignoreErrors) {
                return new Error('No more tries');
            }
            if (this.stop) {
                return new Error('Client has stopped ... no retries anymore');
            }
            if (ready && reconnectCount >= retry_max_count) {
                return new Error('Stop trying to reconnect');
            }
            // A function that receives an options object as parameter including the retry attempt,
            // the total_retry_time indicating how much time passed since the last time connected,
            // the error why the connection was lost and the number of times_connected in total.
            // If you return a number from this function, the retry will happen exactly after that
            // time in milliseconds. If you return a non-number, no further retry will happen and
            // all offline commands are flushed with errors. Return an error to return that
            // specific error to all offline commands.

            if (!ready) {
                return 300;
            } else {
                return retry_max_delay;
            }
            /*if (options.error.code === 'ECONNREFUSED') {
                // End reconnecting on a specific error and flush all commands with a individual error
                return new Error('The server refused the connection');
            }
            if (options.total_retry_time > 1000 * 60 * 60) {
                // End reconnecting after a specific timeout and flush all commands with a individual error
                return new Error('Retry time exhausted');
            }
            if (options.times_connected > 10) {
                // End reconnecting with built in error
                return undefined;
            }
            // reconnect after
            return Math.max(options.attempt * 100, 3000);*/
        }
OBJECTS/OPTIONS/enableReadyCheck: true
OBJECTS/OPTIONS/host: 0.0.0.0
OBJECTS/OPTIONS/port: 9001
OBJECTS/OPTIONS/db: 0
OBJECTS/OPTIONS/family: 0
OBJECTS/OPTIONS/autoResubscribe: false
OBJECTS/OPTIONS/connectionName:
OBJECTS/dataDir: ../../iobroker-data/
OBJECTS/maxQueue: 1000
STATES/type: jsonl
STATES/host: 0.0.0.0
STATES/port: 9000
STATES/OPTIONS/retryStrategy: reconnectCount => {
            if (!ready && initError) {
                return new Error('No more tries');
            }
            if (this.stop) {
                return new Error('Client has stopped ... no retries anymore');
            }
            if (ready && reconnectCount >= retry_max_count) {
                return new Error('Stop trying to reconnect');
            }
            // A function that receives an options object as parameter including the retry attempt,
            // the total_retry_time indicating how much time passed since the last time connected,
            // the error why the connection was lost and the number of times_connected in total.
            // If you return a number from this function, the retry will happen exactly after that
            // time in milliseconds. If you return a non-number, no further retry will happen and
            // all offline commands are flushed with errors. Return an error to return that
            // specific error to all offline commands.

            if (!ready) {
                return 300;
            }
            return retry_max_delay;
            /*if (options.error.code === 'ECONNREFUSED') {
                // End reconnecting on a specific error and flush all commands with a individual error
                return new Error('The server refused the connection');
            }
            if (options.total_retry_time > 1000 * 60 * 60) {
                // End reconnecting after a specific timeout and flush all commands with a individual error
                return new Error('Retry time exhausted');
            }
            if (options.times_connected > 10) {
                // End reconnecting with built in error
                return undefined;
            }
            // reconnect after
            return Math.max(options.attempt * 100, 3000);*/
        }
STATES/OPTIONS/enableReadyCheck: true
STATES/OPTIONS/host: 0.0.0.0
STATES/OPTIONS/port: 9000
STATES/OPTIONS/db: 0
STATES/OPTIONS/family: 0
STATES/OPTIONS/autoResubscribe: false
STATES/OPTIONS/connectionName:
STATES/dataDir: ../../iobroker-data/
STATES/connectTimeout: 5000
STATES/maxQueue: 1000
LOG/level: info
LOG/maxDays: 7
LOG/TRANSPORT/FILE1/type: file
LOG/TRANSPORT/FILE1/enabled: true
LOG/TRANSPORT/FILE1/filename: log/iobroker
LOG/TRANSPORT/FILE1/fileext: .log
dataDir: ../../iobroker-data/
SYSTEM/hostname:

[Thomas Braun]

@wendy2702

Welche Fehler?

Bei mir ist das wesentlich gesprächiger.
Unter anderem steht da sowas drin:

MULTIHOSTSERVICE/enabled: false
MULTIHOSTSERVICE/secure: true
MULTIHOSTSERVICE/password: $/aes-192-cbc:d506ffc0c4fdc9aa32ed3b79478cd755:1814842aadb4f78d501b978cbcd0ef56
MULTIHOSTSERVICE/persist: false
NETWORK/IPv4: true
NETWORK/IPv6: true

Welcher js-controller und admin läuft da bei dir?

[emil70]

@thomas-braun sagte in iob diag - Skript:

@wendy2702

Welche Fehler?

Bei mir ist das wesentlich gesprächiger.
Unter anderem steht da sowas drin:

MULTIHOSTSERVICE/enabled: false
MULTIHOSTSERVICE/secure: true
MULTIHOSTSERVICE/password: $/aes-192-cbc:d506ffc0c4fdc9aa32ed3b79478cd755:1814842aadb4f78d501b978cbcd0ef56
MULTIHOSTSERVICE/persist: false
NETWORK/IPv4: true
NETWORK/IPv6: true

Welcher js-controller und admin läuft da bei dir?

bei mir steht da nur das drin

root@iobroker:/opt/iobroker# iobroker status all | grep MULTIHOSTSERVICE/enabled
MULTIHOSTSERVICE/enabled: false
root@iobroker:/opt/iobroker# 

[Thomas Braun]

@emil70

Und das ist ein Multihost-System?

[emil70]

@thomas-braun sagte in iob diag - Skript:

@emil70

Und das ist ein Multihost-System?

Nein, wollte damit nur mitteilen, das bei mir weniger steht als bei dir. So wie ich das verstanden habe hast du auch kein Mutihorst

[wendy2702]

@thomas-braun JS 4.0.24

Admin 6.4.3

[Thomas Braun]

@emil70 sagte in iob diag - Skript:

Nein, wollte damit nur mitteilen, das bei mir weniger steht als bei dir.

Das ist klar, mit dem grep wird ja auch nur die interessante Zeile aus dem ganzen Wust an Informationen rausgepickt. Wenn du dir die vollständige Version von iobroker status all anschaust wird da auch mehr stehen.

Die Frage ist mehr, warum bei @wendy2702 gar keine Werte dazu auffindbar sind.

[Thomas Braun]

@wendy2702

Ist ja aktueller Stand.
Ich frickel hier mit js-controller 5.0.1-alpha.0-20230406-4552d569 herum.
Ist das etwa damit erst eingeführt worden?

[wendy2702]

@thomas-braun mal auf einem Slave ausgeführt kommt die Multihost Info

pi@pi-iobroker:~ $ iob status all
iobroker is running on this host.

At least one iobroker host is running.

Instance "admin.0" is running
Instance "admin.1" is running
Instance "admin.2" is not running
Instance "daswetter.0" is not running
Instance "dwd.0" is not running
Instance "email.0" is running
Instance "enigma2.0" is running
Instance "feiertage.0" is not running
Instance "flot.0" is not running
Instance "fritzbox.0" is running
Instance "harmony.0" is running
Instance "history.0" is running
Instance "hm-rega.0" is running
Instance "hm-rpc.0" is running
Instance "hm-rpc.1" is running
Instance "hm-rpc.2" is running
Instance "hue.0" is running
Instance "ical.0" is not running
Instance "ical.1" is not running
Instance "ical.2" is not running
Instance "icons-addictive-flavour-png.0" is not running
Instance "icons-fatcow-hosting.0" is not running
Instance "icons-icons8.0" is not running
Instance "icons-material-png.0" is not running
Instance "icons-material-svg.0" is not running
Instance "icons-mfd-png.0" is not running
Instance "icons-mfd-svg.0" is not running
Instance "icons-open-icon-library-png.0" is not running
Instance "icons-ultimate-png.0" is not running
Instance "javascript.0" is running
Instance "javascript.1" is running
Instance "javascript.2" is running
Instance "js2fs.0" is not running
Instance "modbus.0" is running
Instance "modbus.2" is running
Instance "modbus.3" is running
Instance "modbus.4" is not running
Instance "musiccast.0" is not running
Instance "nut.0" is not running
Instance "ping.0" is running
Instance "rpi2.0" is not running
Instance "rpi2.1" is not running
Instance "sayit.0" is running
Instance "simple-api.0" is running
Instance "smartmeter.0" is running
Instance "tankerkoenig.0" is running
Instance "telegram.0" is running
Instance "tr-064.0" is not running
Instance "vis-bars.0" is not running
Instance "vis-canvas-gauges.0" is not running
Instance "vis-colorpicker.0" is not running
Instance "vis-fancyswitch.0" is not running
Instance "vis-google-fonts.0" is not running
Instance "vis-hqwidgets.0" is not running
Instance "vis-jqui-mfd.0" is not running
Instance "vis-justgage.0" is not running
Instance "vis-keyboard.0" is not running
Instance "vis-metro.0" is not running
Instance "vis-plumb.0" is not running
Instance "vis-rgraph.0" is not running
Instance "vis-timeandweather.0" is not running
Instance "vis.0" is not running
Instance "weatherunderground.0" is not running
Instance "web.0" is running
Instance "yahka.0" is running
Instance "yahka.1" is running
Instance "yamaha.0" is running
Instance "yr.0" is not running
Instance "yahka.2" is running
Instance "trashschedule.0" is running
Instance "vis-material-webfont.0" is not running
Instance "vis-materialdesign.0" is not running
Instance "vis-material.0" is not running
Instance "influxdb.0" is running
Instance "vis-inventwo.0" is running
Instance "vis-icontwo.0" is not running
Instance "yahka.3" is not running
Instance "homeconnect.0" is not running
Instance "hue-extended.0" is not running
Instance "linux-control.0" is running
Instance "yahka.4" is running
Instance "socketio.0" is running
Instance "birthdays.0" is not running
Instance "birthdays.1" is not running
Instance "pushover.0" is not running
Instance "alias-manager.0" is not running
Instance "discovery.0" is not running
Instance "net-tools.0" is not running
Instance "sayit.1" is not running
Instance "modbus.5" is running
Instance "enocean.0" is running
Instance "modbus.1" is running
Instance "shuttercontrol.0" is running
Instance "energiefluss.0" is running
Instance "ws.0" is running
Instance "web.1" is running
Instance "backitup.0" is not running
Instance "modbus.6" is not running
Instance "shelly.0" is running
Instance "sourceanalytix.0" is running
Instance "roborock.0" is not running
Instance "vis-2-beta.0" is running
Instance "vis-2-widgets-material.0" is not running
Instance "vis-2-widgets-energy.0" is not running
Instance "vis-2-widgets-gauges.0" is not running
Instance "smartstate.0" is running
Instance "smartmeter.1" is not running
Instance "energiefluss.1" is not running

SYSTEM/memoryLimitMB: 0
SYSTEM/hostname:
SYSTEM/statisticsInterval: 15000
SYSTEM/checkDiskInterval: 300000
SYSTEM/instanceStartInterval: 2000
SYSTEM/compact: false
SYSTEM/allowShellCommands: false
SYSTEM/memLimitWarn: 100
SYSTEM/memLimitError: 50
MULTIHOSTSERVICE/enabled: false
MULTIHOSTSERVICE/secure: true
MULTIHOSTSERVICE/password:
OBJECTS/type: jsonl
OBJECTS/host: 192.168.178.18
OBJECTS/port: 9001
OBJECTS/noFileCache: false
OBJECTS/maxQueue: 1000
OBJECTS/connectTimeout: 5000
OBJECTS/writeFileInterval: 5000
OBJECTS/OPTIONS/retry_max_count: 19
OBJECTS/OPTIONS/db: 0
OBJECTS/OPTIONS/family: 0
OBJECTS/OPTIONS/retryStrategy: reconnectCount => {
            if (!ready && initError && ignoreErrors) {
                return new Error('No more tries');
            }
            if (this.stop) {
                return new Error('Client has stopped ... no retries anymore');
            }
            if (ready && reconnectCount >= retry_max_count) {
                return new Error('Stop trying to reconnect');
            }
            // A function that receives an options object as parameter including the retry attempt,
            // the total_retry_time indicating how much time passed since the last time connected,
            // the error why the connection was lost and the number of times_connected in total.
            // If you return a number from this function, the retry will happen exactly after that
            // time in milliseconds. If you return a non-number, no further retry will happen and
            // all offline commands are flushed with errors. Return an error to return that
            // specific error to all offline commands.

            if (!ready) {
                return 300;
            } else {
                return retry_max_delay;
            }
            /*if (options.error.code === 'ECONNREFUSED') {
                // End reconnecting on a specific error and flush all commands with a individual error
                return new Error('The server refused the connection');
            }
            if (options.total_retry_time > 1000 * 60 * 60) {
                // End reconnecting after a specific timeout and flush all commands with a individual error
                return new Error('Retry time exhausted');
            }
            if (options.times_connected > 10) {
                // End reconnecting with built in error
                return undefined;
            }
            // reconnect after
            return Math.max(options.attempt * 100, 3000);*/
        }
OBJECTS/OPTIONS/enableReadyCheck: true
OBJECTS/OPTIONS/host: 192.168.178.18
OBJECTS/OPTIONS/port: 9001
OBJECTS/OPTIONS/autoResubscribe: false
OBJECTS/OPTIONS/connectionName:
OBJECTS/BACKUP/disabled: false
OBJECTS/BACKUP/files: 24
OBJECTS/BACKUP/hours: 48
OBJECTS/BACKUP/period: 120
OBJECTS/BACKUP/path:
STATES/type: jsonl
STATES/host: 192.168.178.18
STATES/port: 9000
STATES/connectTimeout: 5000
STATES/writeFileInterval: 30000
STATES/OPTIONS/retry_max_count: 19
STATES/OPTIONS/db: 0
STATES/OPTIONS/family: 0
STATES/OPTIONS/retryStrategy: reconnectCount => {
            if (!ready && initError) {
                return new Error('No more tries');
            }
            if (this.stop) {
                return new Error('Client has stopped ... no retries anymore');
            }
            if (ready && reconnectCount >= retry_max_count) {
                return new Error('Stop trying to reconnect');
            }
            // A function that receives an options object as parameter including the retry attempt,
            // the total_retry_time indicating how much time passed since the last time connected,
            // the error why the connection was lost and the number of times_connected in total.
            // If you return a number from this function, the retry will happen exactly after that
            // time in milliseconds. If you return a non-number, no further retry will happen and
            // all offline commands are flushed with errors. Return an error to return that
            // specific error to all offline commands.

            if (!ready) {
                return 300;
            }
            return retry_max_delay;
            /*if (options.error.code === 'ECONNREFUSED') {
                // End reconnecting on a specific error and flush all commands with a individual error
                return new Error('The server refused the connection');
            }
            if (options.total_retry_time > 1000 * 60 * 60) {
                // End reconnecting after a specific timeout and flush all commands with a individual error
                return new Error('Retry time exhausted');
            }
            if (options.times_connected > 10) {
                // End reconnecting with built in error
                return undefined;
            }
            // reconnect after
            return Math.max(options.attempt * 100, 3000);*/
        }
STATES/OPTIONS/enableReadyCheck: true
STATES/OPTIONS/host: 192.168.178.18
STATES/OPTIONS/port: 9000
STATES/OPTIONS/autoResubscribe: false
STATES/OPTIONS/connectionName:
STATES/BACKUP/disabled: false
STATES/BACKUP/files: 24
STATES/BACKUP/hours: 48
STATES/BACKUP/period: 120
STATES/BACKUP/path:
STATES/maxQueue: 1000
LOG/level: info
LOG/maxDays: 7
LOG/noStdout: true
LOG/TRANSPORT/FILE1/type: file
LOG/TRANSPORT/FILE1/enabled: true
LOG/TRANSPORT/FILE1/filename: log/iobroker
LOG/TRANSPORT/FILE1/fileext: .log
LOG/TRANSPORT/SYSLOG1/type: syslog
LOG/TRANSPORT/SYSLOG1/enabled: false
LOG/TRANSPORT/SYSLOG1/host: localhost
LOG/TRANSPORT/SYSLOG1/protocol: udp4
LOG/TRANSPORT/SYSLOG1/localhost: iobroker
LOG/TRANSPORT/SEQ1/type: seq
LOG/TRANSPORT/SEQ1/enabled: false
LOG/TRANSPORT/SEQ1/serverUrl: http://IP:PORT
LOG/TRANSPORT/SEQ1/apiKey:
dataDir: ../../iobroker-data/

[bahnuhr]

@wendy2702
Warum hast du 3 admin ?
Nur mal so zur Info.

[Thomas Braun]

@wendy2702

Aber auch mit false.
Schade, ich hatte gedacht/erwartet, man könnte damit ein Multihost-Setup erkennen.

[wendy2702]

@bahnuhr historisch gewachsen da es früher mal drei einzelne Installation waren.

@Thomas-Braun : ja, merkwürdig das da false steht.

[bahnuhr]

@thomas-braun
@wendy2702

habe auch ein multihost
Und bei mir steht auch false

MULTIHOSTSERVICE/enabled: false
MULTIHOSTSERVICE/secure: true
MULTIHOSTSERVICE/password: $/aes-192-cbc:08dab1f
MULTIHOSTSERVICE/persist: false