[gelöst] Brauche Hilfe beim NSPanel mit Tasmota

GregorS

Hier die Einstellungen von mqtt.1

GregorS

@armilar said in Brauche Hilfe beim NSPanel mit Tasmota:

Viel wichtiger ist, dass der JavaScript-Adapter in der Version größer/gleich 6.1.3 installiert sein muss.
Ebenfalls muss setObjects in der Einstellung des JS-Adapters angehakt sein.

Armilar

@gregors

hundertprozentig sicher, dass der Port nicht von einem anderen Adapter oder einer anderen Adapter-Instanz genutzt wird? Also nicht auch von der Instanz mqtt.0 die ja bereits die Ports 1883 und 1884 nutzt. Im Zweifel mal höher gehen. 1886 oder 1887

Armilar

@armilar

Irgendwelche Fehler im Log? Das Script versucht bereits an das Panel zu senden... Falls noch nichts angezeigt werden sollte außer "waiting for content", stimmt die Kommunikation MQTT zwischen Adapter und Tasmota noch nicht.

GregorS

@armilar

Habe den Port jetzt mal auf 1886 geändert.

mqtt.1
	2023-02-16 20:53:56.627	info	Client [NSPanel_01] publishOnSubscribe send all known states
mqtt.1
	2023-02-16 20:53:56.626	info	Client [NSPanel_01] publishOnSubscribe send all known states
mqtt.1
	2023-02-16 20:53:56.625	info	Client [NSPanel_01] publishOnSubscribe send all known states
mqtt.1
	2023-02-16 20:53:56.426	info	Client [NSPanel_01] subscribes on "cmnd/NSPanel_01_fb/#" with regex /^mqtt\.1\.cmnd\.NSPanel_01_fb(\..*)?/
mqtt.1
	2023-02-16 20:53:56.426	info	Client [NSPanel_01] subscribes on "cmnd/NSPanel_01_fb/#" with regex /^cmnd\.NSPanel_01_fb(\..*)?/
mqtt.1
	2023-02-16 20:53:56.426	info	Client [NSPanel_01] subscribes on "SmartHome/tasmotas/cmnd/#" with regex /^mqtt\.1\.SmartHome\.tasmotas\.cmnd(\..*)?/
mqtt.1
	2023-02-16 20:53:56.426	info	Client [NSPanel_01] subscribes on "SmartHome/tasmotas/cmnd/#" with regex /^SmartHome\.tasmotas\.cmnd(\..*)?/
mqtt.1
	2023-02-16 20:53:56.425	info	Client [NSPanel_01] subscribes on "SmartHome/NSPanel_1/cmnd/#" with regex /^mqtt\.1\.SmartHome\.NSPanel_1\.cmnd(\..*)?/
mqtt.1
	2023-02-16 20:53:56.425	info	Client [NSPanel_01] subscribes on "SmartHome/NSPanel_1/cmnd/#" with regex /^SmartHome\.NSPanel_1\.cmnd(\..*)?/
mqtt.1
	2023-02-16 20:53:56.369	info	Client [NSPanel_01] reconnected. Old secret 1676577213300_2907. New secret 1676577236366_5097
mqtt.1
	2023-02-16 20:53:33.578	info	Client [NSPanel_01] publishOnSubscribe send all known states
mqtt.1
	2023-02-16 20:53:33.577	info	Client [NSPanel_01] publishOnSubscribe send all known states
mqtt.1
	2023-02-16 20:53:33.575	info	Client [NSPanel_01] publishOnSubscribe send all known states
mqtt.1
	2023-02-16 20:53:33.376	info	Client [NSPanel_01] subscribes on "cmnd/NSPanel_01_fb/#" with regex /^mqtt\.1\.cmnd\.NSPanel_01_fb(\..*)?/
mqtt.1
	2023-02-16 20:53:33.376	info	Client [NSPanel_01] subscribes on "cmnd/NSPanel_01_fb/#" with regex /^cmnd\.NSPanel_01_fb(\..*)?/
mqtt.1
	2023-02-16 20:53:33.376	info	Client [NSPanel_01] subscribes on "SmartHome/tasmotas/cmnd/#" with regex /^mqtt\.1\.SmartHome\.tasmotas\.cmnd(\..*)?/
mqtt.1
	2023-02-16 20:53:33.375	info	Client [NSPanel_01] subscribes on "SmartHome/tasmotas/cmnd/#" with regex /^SmartHome\.tasmotas\.cmnd(\..*)?/
mqtt.1
	2023-02-16 20:53:33.375	info	Client [NSPanel_01] subscribes on "SmartHome/NSPanel_1/cmnd/#" with regex /^mqtt\.1\.SmartHome\.NSPanel_1\.cmnd(\..*)?/
mqtt.1
	2023-02-16 20:53:33.374	info	Client [NSPanel_01] subscribes on "SmartHome/NSPanel_1/cmnd/#" with regex /^SmartHome\.NSPanel_1\.cmnd(\..*)?/
mqtt.1
	2023-02-16 20:53:33.303	info	Client [NSPanel_01] connected with secret 1676577213300_2907
mqtt.1
	2023-02-16 20:53:32.506	info	Starting MQTT-WebSocket authenticated server on 0.0.0.0:1887
mqtt.1
	2023-02-16 20:53:32.506	info	Starting MQTT authenticated server on 0.0.0.0:1886

Keine Fehler im Log

Armilar

@gregors

okay jetzt mal in der Tasmota-Console:

Backlog UpdateDriverVersion https://raw.githubusercontent.com/joBr99/nspanel-lovelace-ui/main/tasmota/autoexec.be; Restart 1

dann sollte das Panel rebooten

danach

FlashNextion http://nspanel.pky.eu/lovelace-ui/github/nspanel-v3.9.4.tft

Armilar

@armilar

Wie sehen die Config Parameter bei dir aus?

export const config = <Config> {
    panelRecvTopic: 'mqtt.1.SmartHome.NSPanel_1.tele.RESULT',       // Bitte anpassen
    panelSendTopic: 'mqtt.1.SmartHome.NSPanel_1.cmnd.CustomSend',   // Bitte anpassen

GregorS

@armilar
Habe beide Befehle nacheinander ausgeführt, Panel hat neu gebootet und das flashen wurde auch ausgeführt.

21:01:43.911 MQT: SmartHome/NSPanel_1/tele/STATE = {"Time":"2023-02-16T21:01:43","Uptime":"0T00:01:40","UptimeSec":100,"Heap":152,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":240},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GS-Net","BSSId":"CC:CE:1E:AD:6B:A8","Channel":10,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:04"}}
21:01:43.957 MQT: SmartHome/NSPanel_1/tele/SENSOR = {"Time":"2023-02-16T21:01:43","ANALOG":{"Temperature1":19.8},"ESP32":{"Temperature":48.1},"TempUnit":"C"}
21:01:48.685 MQT: SmartHome/NSPanel_1/tele/RESULT = {"CustomRecv":"event,startup,49,eu"}

Armilar

@gregors

Sende mal die Config Paramater aus dem Post darüber.

GregorS

@armilar

export const config: Config = {
    panelRecvTopic: 'mqtt.1.SmartHome.NSPanel_1.tele.RESULT',       // Bitte anpassen
    panelSendTopic: 'mqtt.1.SmartHome.NSPanel_1.cmnd.CustomSend',   // Bitte anpassen

Hatte ich lt. dem Video angepasst

GregorS

@armilar
Welche Config Parameter meinst du?

Armilar

@gregors

okay, das Panel hat einen Pfad mit Datenpunkte in 0_userdata angelegt. Den mal löschen. Dann das TypeScript nochmal starten...

komplett löschen

Armilar

@gregors

Welche Config Parameter meinst du?

die

export const config: Config = {
   panelRecvTopic: 'mqtt.1.SmartHome.NSPanel_1.tele.RESULT',       // Bitte anpassen
   panelSendTopic: 'mqtt.1.SmartHome.NSPanel_1.cmnd.CustomSend',   // Bitte anpassen

Die aus dem Script aus deinem Post davor

GregorS

@armilar

Die Datenpunkte hat das Script neu angelegt.
Aber die Struktur ist jetzt anders.

Hier die alte Struktur

Armilar

@gregors

Das was du alte Struktur nennst ist der Screenshot aus den MQTT Objekten, nicht 0_userdata

GregorS

@armilar

Jup, hab ich gerade auch gesehen

Armilar

@gregors

Wie sehen denn die tele Datenpunkte im mqtt.1. aus?

EDIT: Du hast da aber keinen Mosquitto oder eine andere Fehlerquelle dazwischen, oder?

Port 1886 jetzt auch in Tasmota?

GregorS

@armilar

Info1

{"Info1":{"Module":"NSPanel","Version":"12.3.1.3(tasmota32-SONOFF_NSPANEL_DE)","FallbackTopic":"cmnd/NSPanel_01_fb/","GroupTopic":"SmartHome/tasmotas/cmnd/"}}

Info2

{"Info2":{"WebServerMode":"Admin","Hostname":"NSPanel-1-3720","IPAddress":"192.168.10.130","IP6Global":"","IP6Local":"fe80::c6dd:57ff:fee7:ee88"}}

Info3

{"Info3":{"RestartReason":"Software reset CPU","BootCount":53}}

Result

{"CustomRecv":"event,startup,49,eu"}

State

{"Time":"2023-02-16T21:22:53","Uptime":"0T00:22:50","UptimeSec":1370,"Heap":151,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":240},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GS-Net","BSSId":"CC:CE:1E:AD:6B:A8","Channel":10,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:04"}}

EDIT: Du hast da aber keinen Mosquitto oder eine andere Fehlerquelle dazwischen, oder?
Nein, alles dirket. NSPanel -> ioBroker
Port 1886 jetzt auch in Tasmota?
NSPanel hat jetzt ebenfalls 1886 in den mqtt-Einstellungen

Armilar

@gregors

Die Empfangsrichtung ist perfekt. Verstehe im Moment nur nicht, warum der CustomSend da nichts sendet. Das Script befeuert den ja schon mit Daten

Gib mal einfach nur folgendes in die Tasmota-Console

CustomSend time~21:30

GregorS

@armilar said in Brauche Hilfe beim NSPanel mit Tasmota:

CustomSend time~21:30

21:30:09.186 MQT: SmartHome/NSPanel_1/stat/RESULT = {"CustomSend":"Done"}
21:30:12.958 MQT: SmartHome/NSPanel_1/tele/STATE = {"Time":"2023-02-16T21:30:12","Uptime":"0T00:01:28","UptimeSec":88,"Heap":145,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":595,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":239},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GS-Net","BSSId":"CC:CE:1E:AD:6B:A8","Channel":10,"Mode":"11n","RSSI":100,"Signal":-45,"LinkCount":1,"Downtime":"0T00:00:03"}}
21:30:13.004 MQT: SmartHome/NSPanel_1/tele/SENSOR = {"Time":"2023-02-16T21:30:12","ANALOG":{"Temperature1":20.4},"ESP32":{"Temperature":49.2},"TempUnit":"C"}
21:30:14.770 MQT: SmartHome/NSPanel_1/tele/RESULT = {"CustomRecv":"event,startup,49,eu"}
21:30:20.770 MQT: SmartHome/NSPanel_1/tele/RESULT = {"CustomRecv":"event,startup,49,eu"}
21:30:22.959 MQT: SmartHome/NSPanel_1/tele/STATE = {"Time":"2023-02-16T21:30:22","Uptime":"0T00:01:38","UptimeSec":98,"Heap":147,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":634,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":240},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GS-Net","BSSId":"CC:CE:1E:AD:6B:A8","Channel":10,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:03"}}
21:30:22.999 MQT: SmartHome/NSPanel_1/tele/SENSOR = {"Time":"2023-02-16T21:30:22","ANALOG":{"Temperature1":20.4},"ESP32":{"Temperature":49.8},"TempUnit":"C"}
21:30:26.671 MQT: SmartHome/NSPanel_1/tele/RESULT = {"CustomRecv":"event,startup,49,eu"}
21:30:32.672 MQT: SmartHome/NSPanel_1/tele/RESULT = {"CustomRecv":"event,startup,49,eu"}
21:30:32.958 MQT: SmartHome/NSPanel_1/tele/STATE = {"Time":"2023-02-16T21:30:32","Uptime":"0T00:01:48","UptimeSec":108,"Heap":147,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":670,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":240},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GS-Net","BSSId":"CC:CE:1E:AD:6B:A8","Channel":10,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:03"}}
21:30:33.003 MQT: SmartHome/NSPanel_1/tele/SENSOR = {"Time":"2023-02-16T21:30:32","ANALOG":{"Temperature1":20.4},"ESP32":{"Temperature":49.8},"TempUnit":"C"}

Community Forum

NEWS

[gelöst] Brauche Hilfe beim NSPanel mit Tasmota

Support us

560

32.7k

82.6k

1.3m