NEWS
Roborock Adapter tester gesucht
-
@dontoben sagte in Roborock Adapter tester gesucht:
SIGSEGV
Was ist das fuer ein PI?
Was sagt:
free -ht sudo apt updateAls erste Hilfe kannst du mal Instanz und Adapter komplett loeschen. Server neu starten und dann neu installieren.
pi@raspberrypi:~ $ free -ht total used free shared buff/cache available Mem: 3,7Gi 606Mi 79Mi 200Mi 3,1Gi 2,8Gi Swap: 99Mi 13Mi 86Mi Total: 3,8Gi 619Mi 166Mi pi@raspberrypi:~ $ sudo apt update OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 https://deb.nodesource.com/node_16.x buster InRelease OK:3 http://archive.raspberrypi.org/debian buster InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Alle Pakete sind aktuell. pi@raspberrypi:~ $Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HD
0.0.5 funktionierte noch einwandfrei.
Deinstallation, Server Neustart und Neuinstallation brachte keine Abhilfe
-
pi@raspberrypi:~ $ free -ht total used free shared buff/cache available Mem: 3,7Gi 606Mi 79Mi 200Mi 3,1Gi 2,8Gi Swap: 99Mi 13Mi 86Mi Total: 3,8Gi 619Mi 166Mi pi@raspberrypi:~ $ sudo apt update OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 https://deb.nodesource.com/node_16.x buster InRelease OK:3 http://archive.raspberrypi.org/debian buster InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Alle Pakete sind aktuell. pi@raspberrypi:~ $Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HD
0.0.5 funktionierte noch einwandfrei.
Deinstallation, Server Neustart und Neuinstallation brachte keine Abhilfe
@dontoben OK. Buster solltest du mal bei Gelegenheit updaten. Bzw. besser was aktuelles neu installieren. Moeglich das es da haengt. Kommt halt drauf an was @copystring alles in seinem Adapter verwendet.
Sonst wuerde ich einmal wie geschrieben vorgehen.
EDIT: Hat sich mit deinem Edit ueberschnitten. Immer noch SIGSEGV als error?
-
@dontoben OK. Buster solltest du mal bei Gelegenheit updaten. Bzw. besser was aktuelles neu installieren. Moeglich das es da haengt. Kommt halt drauf an was @copystring alles in seinem Adapter verwendet.
Sonst wuerde ich einmal wie geschrieben vorgehen.
EDIT: Hat sich mit deinem Edit ueberschnitten. Immer noch SIGSEGV als error?
@wendy2702 said in Roborock Adapter tester gesucht:
@dontoben OK. Buster solltest du mal bei Gelegenheit updaten. Bzw. besser was aktuelles neu installieren. Moeglich das es da haengt. Kommt halt drauf an was @copystring alles in seinem Adapter verwendet.
Sonst wuerde ich einmal wie geschrieben vorgehen.
EDIT: Hat sich mit deinem Edit ueberschnitten. Immer noch SIGSEGV als error?
Ja, SIGSEGV kommt noch als Fehler.
Ich warte jetzt mal, was @copystring sagt. Update des Betriebssystems würde ich nur zur Not machen, da ich das mühselige Neueinrichten vermeiden möchte.Hoffentlich ist es nur ein Fehler im Adapter.
-
@wendy2702 said in Roborock Adapter tester gesucht:
@dontoben OK. Buster solltest du mal bei Gelegenheit updaten. Bzw. besser was aktuelles neu installieren. Moeglich das es da haengt. Kommt halt drauf an was @copystring alles in seinem Adapter verwendet.
Sonst wuerde ich einmal wie geschrieben vorgehen.
EDIT: Hat sich mit deinem Edit ueberschnitten. Immer noch SIGSEGV als error?
Ja, SIGSEGV kommt noch als Fehler.
Ich warte jetzt mal, was @copystring sagt. Update des Betriebssystems würde ich nur zur Not machen, da ich das mühselige Neueinrichten vermeiden möchte.Hoffentlich ist es nur ein Fehler im Adapter.
-
SIGSEGV steht für Segmentation fault. Ein Programm stürzt also ab. Dass das von meinen Adapter direkt kommt ist eher unwahrscheinlich. Es wird wohl eher daher kommen, dass entweder eine Bibliothek (vielleicht canvas von npm) abstürzt oder ein RPi nicht damit klar kommt, dass die Karte jede Sekunde neu erstellt wird. Beim meinen Server lief das auch nicht richtig aber es kam nie ein Absturz. Daher hatte ich das bereits auf 2 Sekunden reduziert.
-
@hunter-0 said in Roborock Adapter tester gesucht:
@dontoben
Ist Node v16 nicht voraussetzen? Du hast: (node: v14.18.1)Gleiches Problem mit Node v16.19.0
Hier mal der Log vom installieren des Adapters. Waren das schon immer so viele Meldungen?
$ iobroker url copystring/ioBroker.roborock --host raspberrypi --debug install copystring/ioBroker.roborock NPM version: 6.14.5 Installing copystring/ioBroker.roborock... (System call) > canvas@2.11.0 install /opt/iobroker/node_modules/canvas> node-pre-gyp install --fallback-to-build --update-binary node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not installable for canvas@2.11.0 and node@16.19.0 (node-v93 ABI, glibc) (falling back to source compile with node-gyp) node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz (node:4471) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. (Use `node --trace-deprecation ...` to show where the warning was created) make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node CXX(target) Release/obj.target/canvas/src/backend/Backend.o CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o ../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:../src/bmp/BMPParser.cc:186:16: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare] E(ptr - data > imgdOffset, "image data overlaps with another structure"); ~~~~~~~~~~~^~~~~~~~~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~../src/bmp/BMPParser.cc:201:27: warning: comparison of integer expressions of different signedness: ‘uint32_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] E(ptr - data + imgdSize > len, "not enough image data"); ~~~~~~~~~~~~~~~~~~~~~~^~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ CXX(target) Release/obj.target/canvas/src/Backends.o CXX(target) Release/obj.target/canvas/src/Canvas.o CXX(target) Release/obj.target/canvas/src/CanvasGradient.o CXX(target) Release/obj.target/canvas/src/CanvasPattern.o CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o ../src/CanvasRenderingContext2d.cc: In member function ‘void Context2d::setTextPath(double, double)’:../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_LEFT’ not handled in switch [-Wswitch] switch (state->textAlignment) { ^../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_START’ not handled in switch [-Wswitch] CXX(target) Release/obj.target/canvas/src/closure.o CXX(target) Release/obj.target/canvas/src/color.o CXX(target) Release/obj.target/canvas/src/Image.o CXX(target) Release/obj.target/canvas/src/ImageData.o CXX(target) Release/obj.target/canvas/src/init.o CXX(target) Release/obj.target/canvas/src/register_font.o SOLINK_MODULE(target) Release/obj.target/canvas.node COPY Release/canvas.node make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen npm WARN crc@4.1.1 requires a peer of buffer@>=6.0.3 but none is installed. You must install peer dependencies yourself.npm WARN http-cookie-agent@4.0.2 requires a peer of tough-cookie@^4.0.0 but none is installed. You must install peer dependencies yourself.npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.8 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.8: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) + iobroker.roborock@0.0.6-alpha.0added 45 packages from 35 contributors and updated 1 package in 346.618s 48 packages are looking for funding run `npm fund` for details upload [11] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [6] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [0] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/roborock.png roborock.png image/png Process exited with code 0@dontoben said in Roborock Adapter tester gesucht:
@hunter-0 said in Roborock Adapter tester gesucht:
@dontoben
Ist Node v16 nicht voraussetzen? Du hast: (node: v14.18.1)Gleiches Problem mit Node v16.19.0
Hier mal der Log vom installieren des Adapters. Waren das schon immer so viele Meldungen?
$ iobroker url copystring/ioBroker.roborock --host raspberrypi --debug install copystring/ioBroker.roborock NPM version: 6.14.5 Installing copystring/ioBroker.roborock... (System call) > canvas@2.11.0 install /opt/iobroker/node_modules/canvas> node-pre-gyp install --fallback-to-build --update-binary node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not installable for canvas@2.11.0 and node@16.19.0 (node-v93 ABI, glibc) (falling back to source compile with node-gyp) node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz (node:4471) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. (Use `node --trace-deprecation ...` to show where the warning was created) make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node CXX(target) Release/obj.target/canvas/src/backend/Backend.o CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o ../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:../src/bmp/BMPParser.cc:186:16: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare] E(ptr - data > imgdOffset, "image data overlaps with another structure"); ~~~~~~~~~~~^~~~~~~~~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~../src/bmp/BMPParser.cc:201:27: warning: comparison of integer expressions of different signedness: ‘uint32_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] E(ptr - data + imgdSize > len, "not enough image data"); ~~~~~~~~~~~~~~~~~~~~~~^~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ CXX(target) Release/obj.target/canvas/src/Backends.o CXX(target) Release/obj.target/canvas/src/Canvas.o CXX(target) Release/obj.target/canvas/src/CanvasGradient.o CXX(target) Release/obj.target/canvas/src/CanvasPattern.o CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o ../src/CanvasRenderingContext2d.cc: In member function ‘void Context2d::setTextPath(double, double)’:../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_LEFT’ not handled in switch [-Wswitch] switch (state->textAlignment) { ^../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_START’ not handled in switch [-Wswitch] CXX(target) Release/obj.target/canvas/src/closure.o CXX(target) Release/obj.target/canvas/src/color.o CXX(target) Release/obj.target/canvas/src/Image.o CXX(target) Release/obj.target/canvas/src/ImageData.o CXX(target) Release/obj.target/canvas/src/init.o CXX(target) Release/obj.target/canvas/src/register_font.o SOLINK_MODULE(target) Release/obj.target/canvas.node COPY Release/canvas.node make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen npm WARN crc@4.1.1 requires a peer of buffer@>=6.0.3 but none is installed. You must install peer dependencies yourself.npm WARN http-cookie-agent@4.0.2 requires a peer of tough-cookie@^4.0.0 but none is installed. You must install peer dependencies yourself.npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.8 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.8: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) + iobroker.roborock@0.0.6-alpha.0added 45 packages from 35 contributors and updated 1 package in 346.618s 48 packages are looking for funding run `npm fund` for details upload [11] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [6] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [0] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/roborock.png roborock.png image/png Process exited with code 0Ist dies das selbe Problem https://github.com/copystring/ioBroker.roborock/issues/40?
Für die Karte wird canvas benötigt und canvas scheint es für RPi (bzw. für arm) nicht zu geben... Daher 404 beim Herunterladen von canvas. Es scheint auch keine ältere Version von canvas für den RPi (arm) zu geben.
Vielleicht gibt es eine alternative, welche auch auf dem RPi läuft... -
Vergiss was ich gesagt habe. canvas wurde anschließend erfolgreich kompiliert.
Der eigentliche Fehler ist bei:npm WARN crc@4.1.1 requires a peer of buffer@>=6.0.3 but none is installed. -
@copystring sagte in Roborock Adapter tester gesucht:
buffer@>=6.0.3
Da habe ich ja Glueck gehabt das es die bei mir gibt:
npm ls buffer [sudo] password for mi: iobroker.inst@2.0.3 /opt/iobroker +-- iobroker.modbus@5.0.11 | `-- crc@4.1.1 | `-- buffer@6.0.3 +-- iobroker.mqtt@4.0.7 | `-- mqtt-connection@4.1.0 | `-- mqtt-packet@6.10.0 | `-- bl@4.1.0 | `-- buffer@5.7.1 +-- iobroker.sayit@1.12.6 | `-- aws-sdk@2.1071.0 | `-- buffer@4.9.2 `-- iobroker.shelly@6.3.1 `-- shelly-iot@1.1.2 `-- coap@0.26.0 `-- bl@5.1.0 `-- buffer@6.0.3 deduped -
@dontoben said in Roborock Adapter tester gesucht:
@hunter-0 said in Roborock Adapter tester gesucht:
@dontoben
Ist Node v16 nicht voraussetzen? Du hast: (node: v14.18.1)Gleiches Problem mit Node v16.19.0
Hier mal der Log vom installieren des Adapters. Waren das schon immer so viele Meldungen?
$ iobroker url copystring/ioBroker.roborock --host raspberrypi --debug install copystring/ioBroker.roborock NPM version: 6.14.5 Installing copystring/ioBroker.roborock... (System call) > canvas@2.11.0 install /opt/iobroker/node_modules/canvas> node-pre-gyp install --fallback-to-build --update-binary node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not installable for canvas@2.11.0 and node@16.19.0 (node-v93 ABI, glibc) (falling back to source compile with node-gyp) node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz (node:4471) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. (Use `node --trace-deprecation ...` to show where the warning was created) make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node CXX(target) Release/obj.target/canvas/src/backend/Backend.o CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o ../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:../src/bmp/BMPParser.cc:186:16: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare] E(ptr - data > imgdOffset, "image data overlaps with another structure"); ~~~~~~~~~~~^~~~~~~~~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~../src/bmp/BMPParser.cc:201:27: warning: comparison of integer expressions of different signedness: ‘uint32_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] E(ptr - data + imgdSize > len, "not enough image data"); ~~~~~~~~~~~~~~~~~~~~~~^~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ CXX(target) Release/obj.target/canvas/src/Backends.o CXX(target) Release/obj.target/canvas/src/Canvas.o CXX(target) Release/obj.target/canvas/src/CanvasGradient.o CXX(target) Release/obj.target/canvas/src/CanvasPattern.o CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o ../src/CanvasRenderingContext2d.cc: In member function ‘void Context2d::setTextPath(double, double)’:../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_LEFT’ not handled in switch [-Wswitch] switch (state->textAlignment) { ^../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_START’ not handled in switch [-Wswitch] CXX(target) Release/obj.target/canvas/src/closure.o CXX(target) Release/obj.target/canvas/src/color.o CXX(target) Release/obj.target/canvas/src/Image.o CXX(target) Release/obj.target/canvas/src/ImageData.o CXX(target) Release/obj.target/canvas/src/init.o CXX(target) Release/obj.target/canvas/src/register_font.o SOLINK_MODULE(target) Release/obj.target/canvas.node COPY Release/canvas.node make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen npm WARN crc@4.1.1 requires a peer of buffer@>=6.0.3 but none is installed. You must install peer dependencies yourself.npm WARN http-cookie-agent@4.0.2 requires a peer of tough-cookie@^4.0.0 but none is installed. You must install peer dependencies yourself.npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.8 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.8: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) + iobroker.roborock@0.0.6-alpha.0added 45 packages from 35 contributors and updated 1 package in 346.618s 48 packages are looking for funding run `npm fund` for details upload [11] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [6] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [0] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/roborock.png roborock.png image/png Process exited with code 0Ist dies das selbe Problem https://github.com/copystring/ioBroker.roborock/issues/40?
Für die Karte wird canvas benötigt und canvas scheint es für RPi (bzw. für arm) nicht zu geben... Daher 404 beim Herunterladen von canvas. Es scheint auch keine ältere Version von canvas für den RPi (arm) zu geben.
Vielleicht gibt es eine alternative, welche auch auf dem RPi läuft...@copystring said in Roborock Adapter tester gesucht:
@dontoben said in Roborock Adapter tester gesucht:
@hunter-0 said in Roborock Adapter tester gesucht:
@dontoben
Ist Node v16 nicht voraussetzen? Du hast: (node: v14.18.1)Gleiches Problem mit Node v16.19.0
Hier mal der Log vom installieren des Adapters. Waren das schon immer so viele Meldungen?
$ iobroker url copystring/ioBroker.roborock --host raspberrypi --debug install copystring/ioBroker.roborock NPM version: 6.14.5 Installing copystring/ioBroker.roborock... (System call) > canvas@2.11.0 install /opt/iobroker/node_modules/canvas> node-pre-gyp install --fallback-to-build --update-binary node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not installable for canvas@2.11.0 and node@16.19.0 (node-v93 ABI, glibc) (falling back to source compile with node-gyp) node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz (node:4471) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. (Use `node --trace-deprecation ...` to show where the warning was created) make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node CXX(target) Release/obj.target/canvas/src/backend/Backend.o CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o ../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:../src/bmp/BMPParser.cc:186:16: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare] E(ptr - data > imgdOffset, "image data overlaps with another structure"); ~~~~~~~~~~~^~~~~~~~~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~../src/bmp/BMPParser.cc:201:27: warning: comparison of integer expressions of different signedness: ‘uint32_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] E(ptr - data + imgdSize > len, "not enough image data"); ~~~~~~~~~~~~~~~~~~~~~~^~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ CXX(target) Release/obj.target/canvas/src/Backends.o CXX(target) Release/obj.target/canvas/src/Canvas.o CXX(target) Release/obj.target/canvas/src/CanvasGradient.o CXX(target) Release/obj.target/canvas/src/CanvasPattern.o CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o ../src/CanvasRenderingContext2d.cc: In member function ‘void Context2d::setTextPath(double, double)’:../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_LEFT’ not handled in switch [-Wswitch] switch (state->textAlignment) { ^../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_START’ not handled in switch [-Wswitch] CXX(target) Release/obj.target/canvas/src/closure.o CXX(target) Release/obj.target/canvas/src/color.o CXX(target) Release/obj.target/canvas/src/Image.o CXX(target) Release/obj.target/canvas/src/ImageData.o CXX(target) Release/obj.target/canvas/src/init.o CXX(target) Release/obj.target/canvas/src/register_font.o SOLINK_MODULE(target) Release/obj.target/canvas.node COPY Release/canvas.node make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen npm WARN crc@4.1.1 requires a peer of buffer@>=6.0.3 but none is installed. You must install peer dependencies yourself.npm WARN http-cookie-agent@4.0.2 requires a peer of tough-cookie@^4.0.0 but none is installed. You must install peer dependencies yourself.npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.8 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.8: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) + iobroker.roborock@0.0.6-alpha.0added 45 packages from 35 contributors and updated 1 package in 346.618s 48 packages are looking for funding run `npm fund` for details upload [11] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [6] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [0] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/roborock.png roborock.png image/png Process exited with code 0Ist dies das selbe Problem https://github.com/copystring/ioBroker.roborock/issues/40?
Für die Karte wird canvas benötigt und canvas scheint es für RPi (bzw. für arm) nicht zu geben... Daher 404 beim Herunterladen von canvas. Es scheint auch keine ältere Version von canvas für den RPi (arm) zu geben.
Vielleicht gibt es eine alternative, welche auch auf dem RPi läuft...@copystring
Ja das ist issue 40.
Ich mache dann heute mit deinen Anweisungen aus issue 40 weiter. Oder soll ich noch etwas anderes installieren? -
@copystring said in Roborock Adapter tester gesucht:
@dontoben said in Roborock Adapter tester gesucht:
@hunter-0 said in Roborock Adapter tester gesucht:
@dontoben
Ist Node v16 nicht voraussetzen? Du hast: (node: v14.18.1)Gleiches Problem mit Node v16.19.0
Hier mal der Log vom installieren des Adapters. Waren das schon immer so viele Meldungen?
$ iobroker url copystring/ioBroker.roborock --host raspberrypi --debug install copystring/ioBroker.roborock NPM version: 6.14.5 Installing copystring/ioBroker.roborock... (System call) > canvas@2.11.0 install /opt/iobroker/node_modules/canvas> node-pre-gyp install --fallback-to-build --update-binary node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not installable for canvas@2.11.0 and node@16.19.0 (node-v93 ABI, glibc) (falling back to source compile with node-gyp) node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.11.0/canvas-v2.11.0-node-v93-linux-glibc-arm.tar.gz (node:4471) [DEP0150] DeprecationWarning: Setting process.config is deprecated. In the future the property will be read-only. (Use `node --trace-deprecation ...` to show where the warning was created) make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node CXX(target) Release/obj.target/canvas/src/backend/Backend.o CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o ../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:../src/bmp/BMPParser.cc:186:16: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare] E(ptr - data > imgdOffset, "image data overlaps with another structure"); ~~~~~~~~~~~^~~~~~~~~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~../src/bmp/BMPParser.cc:201:27: warning: comparison of integer expressions of different signedness: ‘uint32_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] E(ptr - data + imgdSize > len, "not enough image data"); ~~~~~~~~~~~~~~~~~~~~~~^~~~~../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ CXX(target) Release/obj.target/canvas/src/Backends.o CXX(target) Release/obj.target/canvas/src/Canvas.o CXX(target) Release/obj.target/canvas/src/CanvasGradient.o CXX(target) Release/obj.target/canvas/src/CanvasPattern.o CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o ../src/CanvasRenderingContext2d.cc: In member function ‘void Context2d::setTextPath(double, double)’:../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_LEFT’ not handled in switch [-Wswitch] switch (state->textAlignment) { ^../src/CanvasRenderingContext2d.cc:2494:10: warning: enumeration value ‘TEXT_ALIGNMENT_START’ not handled in switch [-Wswitch] CXX(target) Release/obj.target/canvas/src/closure.o CXX(target) Release/obj.target/canvas/src/color.o CXX(target) Release/obj.target/canvas/src/Image.o CXX(target) Release/obj.target/canvas/src/ImageData.o CXX(target) Release/obj.target/canvas/src/init.o CXX(target) Release/obj.target/canvas/src/register_font.o SOLINK_MODULE(target) Release/obj.target/canvas.node COPY Release/canvas.node make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen npm WARN crc@4.1.1 requires a peer of buffer@>=6.0.3 but none is installed. You must install peer dependencies yourself.npm WARN http-cookie-agent@4.0.2 requires a peer of tough-cookie@^4.0.0 but none is installed. You must install peer dependencies yourself.npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.8 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.8: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) + iobroker.roborock@0.0.6-alpha.0added 45 packages from 35 contributors and updated 1 package in 346.618s 48 packages are looking for funding run `npm fund` for details upload [11] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [6] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [0] roborock.admin /opt/iobroker/node_modules/iobroker.roborock/admin/roborock.png roborock.png image/png Process exited with code 0Ist dies das selbe Problem https://github.com/copystring/ioBroker.roborock/issues/40?
Für die Karte wird canvas benötigt und canvas scheint es für RPi (bzw. für arm) nicht zu geben... Daher 404 beim Herunterladen von canvas. Es scheint auch keine ältere Version von canvas für den RPi (arm) zu geben.
Vielleicht gibt es eine alternative, welche auch auf dem RPi läuft...@copystring
Ja das ist issue 40.
Ich mache dann heute mit deinen Anweisungen aus issue 40 weiter. Oder soll ich noch etwas anderes installieren?@dontoben Siehe github.
-
Da es noch keine neue Version ist, weiß ich nicht ob es ein Issue für Github ist. Main Branch stand jetzt:
-
Hi,
aktualisieren sich bei euch die Objekte noch?
Unser Sauger ist eben gefahren und ich kann keine Änderung in den Objekten feststellen.
Batterie z.B.
Nach knapp 45 minuten Arbeit unverändert.
Bisschen was RAM belegt er auch:
Und im Log passiert zum Adapter nichts mehr.
Erst nach restart kommen die neuen Werte aber beim RAM hochzählen kann ich zugucken:
Restart log ohne Debug:
mirko@iobroker:~$ tail -f /opt/iobroker/log/iobroker.current.log |grep roborock 2023-02-02 15:50:38.847 - info: host.iobroker stopInstance system.adapter.roborock.0 (force=false, process=true) 2023-02-02 15:50:38.851 - info: roborock.0 (77838) Got terminate signal TERMINATE_YOURSELF 2023-02-02 15:50:38.853 - info: roborock.0 (77838) terminating 2023-02-02 15:50:38.854 - info: roborock.0 (77838) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-02-02 15:50:39.007 - info: host.iobroker stopInstance system.adapter.roborock.0 send kill signal 2023-02-02 15:50:40.012 - info: host.iobroker stopInstance system.adapter.roborock.0 killing pid 77838 2023-02-02 15:50:40.323 - info: host.iobroker instance system.adapter.roborock.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-02-02 15:50:42.148 - info: host.iobroker instance system.adapter.roborock.0 started with pid 89295 2023-02-02 15:50:43.974 - info: roborock.0 (89295) starting. Version 0.0.6-alpha.0 (non-npm: copystring/ioBroker.roborock) in /opt/iobroker/node_modules/iobroker.roborock, node: v16.19.0, js-controller: 4.0.24 2023-02-02 15:50:44.177 - info: roborock.0 (89295) MQTT initialized 2023-02-02 15:51:23.345 - info: host.iobroker "system.adapter.roborock.0" disabled 2023-02-02 15:51:23.346 - info: host.iobroker stopInstance system.adapter.roborock.0 (force=false, process=true) 2023-02-02 15:51:23.360 - info: roborock.0 (89295) Got terminate signal TERMINATE_YOURSELF 2023-02-02 15:51:23.364 - info: roborock.0 (89295) terminating 2023-02-02 15:51:23.365 - info: roborock.0 (89295) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-02-02 15:51:23.392 - info: host.iobroker stopInstance system.adapter.roborock.0 send kill signal 2023-02-02 15:51:23.954 - warn: roborock.0 (89295) get state error: Connection is closed. 2023-02-02 15:51:23.956 - error: roborock.0 (89295) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2023-02-02 15:51:23.956 - error: roborock.0 (89295) unhandled promise rejection: DB closed 2023-02-02 15:51:23.956 - error: roborock.0 (89295) Error: DB closed 2023-02-02 15:51:23.956 - error: roborock.0 (89295) DB closed 2023-02-02 15:51:24.059 - info: host.iobroker instance system.adapter.roborock.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-02-02 15:52:43.193 - info: host.iobroker "system.adapter.roborock.0" enabled 2023-02-02 15:52:43.422 - info: host.iobroker instance system.adapter.roborock.0 started with pid 89332 2023-02-02 15:52:44.603 - info: roborock.0 (89332) starting. Version 0.0.6-alpha.0 (non-npm: copystring/ioBroker.roborock) in /opt/iobroker/node_modules/iobroker.roborock, node: v16.19.0, js-controller: 4.0.24 2023-02-02 15:52:44.827 - info: roborock.0 (89332) MQTT initialized 2023-02-02 15:54:25.755 - info: host.iobroker "system.adapter.roborock.0" disabled 2023-02-02 15:54:25.756 - info: host.iobroker stopInstance system.adapter.roborock.0 (force=false, process=true) 2023-02-02 15:54:25.769 - info: roborock.0 (89332) Got terminate signal TERMINATE_YOURSELF 2023-02-02 15:54:25.772 - info: roborock.0 (89332) terminating 2023-02-02 15:54:25.772 - info: roborock.0 (89332) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-02-02 15:54:25.800 - info: host.iobroker stopInstance system.adapter.roborock.0 send kill signal 2023-02-02 15:54:26.440 - warn: roborock.0 (89332) get state error: Connection is closed. 2023-02-02 15:54:26.441 - error: roborock.0 (89332) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2023-02-02 15:54:26.441 - error: roborock.0 (89332) unhandled promise rejection: DB closed 2023-02-02 15:54:26.442 - error: roborock.0 (89332) Error: DB closed 2023-02-02 15:54:26.442 - error: roborock.0 (89332) DB closed 2023-02-02 15:54:26.533 - info: host.iobroker instance system.adapter.roborock.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)@copystring : soll ich ein Issue aufmachen?
Desweiteren, kann man es vielleicht so machen das die Karte nur aktualisiert wird wenn das Kerlchen fährt?
Bitte keine Fragen per PN, die gehören ins Forum!
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
-
Hi,
aktualisieren sich bei euch die Objekte noch?
Unser Sauger ist eben gefahren und ich kann keine Änderung in den Objekten feststellen.
Batterie z.B.
Nach knapp 45 minuten Arbeit unverändert.
Bisschen was RAM belegt er auch:
Und im Log passiert zum Adapter nichts mehr.
Erst nach restart kommen die neuen Werte aber beim RAM hochzählen kann ich zugucken:
Restart log ohne Debug:
mirko@iobroker:~$ tail -f /opt/iobroker/log/iobroker.current.log |grep roborock 2023-02-02 15:50:38.847 - info: host.iobroker stopInstance system.adapter.roborock.0 (force=false, process=true) 2023-02-02 15:50:38.851 - info: roborock.0 (77838) Got terminate signal TERMINATE_YOURSELF 2023-02-02 15:50:38.853 - info: roborock.0 (77838) terminating 2023-02-02 15:50:38.854 - info: roborock.0 (77838) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-02-02 15:50:39.007 - info: host.iobroker stopInstance system.adapter.roborock.0 send kill signal 2023-02-02 15:50:40.012 - info: host.iobroker stopInstance system.adapter.roborock.0 killing pid 77838 2023-02-02 15:50:40.323 - info: host.iobroker instance system.adapter.roborock.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-02-02 15:50:42.148 - info: host.iobroker instance system.adapter.roborock.0 started with pid 89295 2023-02-02 15:50:43.974 - info: roborock.0 (89295) starting. Version 0.0.6-alpha.0 (non-npm: copystring/ioBroker.roborock) in /opt/iobroker/node_modules/iobroker.roborock, node: v16.19.0, js-controller: 4.0.24 2023-02-02 15:50:44.177 - info: roborock.0 (89295) MQTT initialized 2023-02-02 15:51:23.345 - info: host.iobroker "system.adapter.roborock.0" disabled 2023-02-02 15:51:23.346 - info: host.iobroker stopInstance system.adapter.roborock.0 (force=false, process=true) 2023-02-02 15:51:23.360 - info: roborock.0 (89295) Got terminate signal TERMINATE_YOURSELF 2023-02-02 15:51:23.364 - info: roborock.0 (89295) terminating 2023-02-02 15:51:23.365 - info: roborock.0 (89295) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-02-02 15:51:23.392 - info: host.iobroker stopInstance system.adapter.roborock.0 send kill signal 2023-02-02 15:51:23.954 - warn: roborock.0 (89295) get state error: Connection is closed. 2023-02-02 15:51:23.956 - error: roborock.0 (89295) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2023-02-02 15:51:23.956 - error: roborock.0 (89295) unhandled promise rejection: DB closed 2023-02-02 15:51:23.956 - error: roborock.0 (89295) Error: DB closed 2023-02-02 15:51:23.956 - error: roborock.0 (89295) DB closed 2023-02-02 15:51:24.059 - info: host.iobroker instance system.adapter.roborock.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-02-02 15:52:43.193 - info: host.iobroker "system.adapter.roborock.0" enabled 2023-02-02 15:52:43.422 - info: host.iobroker instance system.adapter.roborock.0 started with pid 89332 2023-02-02 15:52:44.603 - info: roborock.0 (89332) starting. Version 0.0.6-alpha.0 (non-npm: copystring/ioBroker.roborock) in /opt/iobroker/node_modules/iobroker.roborock, node: v16.19.0, js-controller: 4.0.24 2023-02-02 15:52:44.827 - info: roborock.0 (89332) MQTT initialized 2023-02-02 15:54:25.755 - info: host.iobroker "system.adapter.roborock.0" disabled 2023-02-02 15:54:25.756 - info: host.iobroker stopInstance system.adapter.roborock.0 (force=false, process=true) 2023-02-02 15:54:25.769 - info: roborock.0 (89332) Got terminate signal TERMINATE_YOURSELF 2023-02-02 15:54:25.772 - info: roborock.0 (89332) terminating 2023-02-02 15:54:25.772 - info: roborock.0 (89332) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-02-02 15:54:25.800 - info: host.iobroker stopInstance system.adapter.roborock.0 send kill signal 2023-02-02 15:54:26.440 - warn: roborock.0 (89332) get state error: Connection is closed. 2023-02-02 15:54:26.441 - error: roborock.0 (89332) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2023-02-02 15:54:26.441 - error: roborock.0 (89332) unhandled promise rejection: DB closed 2023-02-02 15:54:26.442 - error: roborock.0 (89332) Error: DB closed 2023-02-02 15:54:26.442 - error: roborock.0 (89332) DB closed 2023-02-02 15:54:26.533 - info: host.iobroker instance system.adapter.roborock.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)@copystring : soll ich ein Issue aufmachen?
Desweiteren, kann man es vielleicht so machen das die Karte nur aktualisiert wird wenn das Kerlchen fährt?
@wendy2702 Ja bitte ein Issue öffnen. Es scheint so zu sein, dass viel RAM belegt wird wenn unbekannte Befehle oder Statusnachrichten vorliegen. Siehe https://github.com/copystring/ioBroker.roborock/issues/34 und https://github.com/copystring/ioBroker.roborock/issues/49
Für solche Probleme brauche ich Tester da ich den passenden Saugroboter nicht habe. Hier z.B. den Roborock S7 MaxV (Ultra). Für den Roboter kann https://github.com/copystring/ioBroker.roborock/compare/update_robot_attributes getestet werden.Unterstütze meine Arbeit gerne mit einer Spende über PayPal:
https://paypal.me/copystring -
@wendy2702 Ja bitte ein Issue öffnen. Es scheint so zu sein, dass viel RAM belegt wird wenn unbekannte Befehle oder Statusnachrichten vorliegen. Siehe https://github.com/copystring/ioBroker.roborock/issues/34 und https://github.com/copystring/ioBroker.roborock/issues/49
Für solche Probleme brauche ich Tester da ich den passenden Saugroboter nicht habe. Hier z.B. den Roborock S7 MaxV (Ultra). Für den Roboter kann https://github.com/copystring/ioBroker.roborock/compare/update_robot_attributes getestet werden.@copystring sagte in Roborock Adapter tester gesucht:
a bitte ein Issue öffnen
Ich habe mich an das Issue dran gehangen, oder wolltest du zwingend ein neues?
https://github.com/copystring/ioBroker.roborock/issues/49
Für das Map Update neues Issue:
Bitte keine Fragen per PN, die gehören ins Forum!
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
-
@copystring sagte in Roborock Adapter tester gesucht:
a bitte ein Issue öffnen
Ich habe mich an das Issue dran gehangen, oder wolltest du zwingend ein neues?
https://github.com/copystring/ioBroker.roborock/issues/49
Für das Map Update neues Issue:
@wendy2702 Ist schon ok so.
Unterstütze meine Arbeit gerne mit einer Spende über PayPal:
https://paypal.me/copystring -
@wendy2702 Ist schon ok so.
-
Hab mir jetzt mal Seq installiert, dann kann man besser das Log ziehen.
Seq
Gibts auch nen Adapter dazu@m-a-hueb Die Funktion suche ich auch. Aktuell lade ich den Log runter und (Linux/Mac) führe dann dieses Kommando in einer Shell aus:
grep ": roborock" log.txt | sed 's/Name1/Kind1/' | sed 's/Name2/Kind2/' > robolog.txtDas grep filtert die roborock Eintröge aus dem Log, die beiden sed ersetzen die realen Namen meiner Kinder (die Räume sind so benannt) durch KindX..
-
@m-a-hueb Die Funktion suche ich auch. Aktuell lade ich den Log runter und (Linux/Mac) führe dann dieses Kommando in einer Shell aus:
grep ": roborock" log.txt | sed 's/Name1/Kind1/' | sed 's/Name2/Kind2/' > robolog.txtDas grep filtert die roborock Eintröge aus dem Log, die beiden sed ersetzen die realen Namen meiner Kinder (die Räume sind so benannt) durch KindX..
@simplyclever Danke aber bin unter Windows unterwegs. Mit dem Seq Tool ist das recht easy jetzt
Support us
826
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge