SONOFF Adapter in Kollision mit MQTT Adapter

Glasfaser

@goetschhofer

Nur mal am Rande ...

Ich finde Screenshot´s schrecklich ... warum packst du die Ausgabe nicht in Code-Tags .

und ... das würde ich mal aktualisieren !

GOETSCHHOFER

@glasfaser

Sorry, dies habe ich mittlerweile wieder verschwitzt, habe es aber bereits korrigiert.

Ich bin hier bei den Aktualisierungen massiv in Verzug, aber habe echt Bammel vor den Anpassungen.

Glasfaser

@goetschhofer

Da fehlt was ...

haselchen

@goetschhofer

Der Bammel ist berechtigt.
Der Adapter wurde optimiert für min. JS Controller 3.3.x
Hilft nichts. Da musste mal ran an das Ganze.

Glasfaser

@goetschhofer

Wie oft machst du Edit in deinem Beitrag ... das ist KÄSE !!

Das ist neu ...

und die IP Falsch !?

GOETSCHHOFER

@glasfaser

Sorry, aber welcher Benutzer und Kennwort ist hier einzutragen ? mqtt ? Eigenes PW ?

Danke

Glasfaser

@goetschhofer sagte in SONOFF Adapter in Kollision mit MQTT Adapter:

Sorry, aber welcher Benutzer und Kennwort ist hier einzutragen ?

GOETSCHHOFER

@glasfaser

Habe jetzt die IP-Adresse geändert, BN + PW nochmals neu vergeben, Restart gemacht, aber es will noch nicht.

Habe auch den MQTT Adapter mit Port: 1883 im Einsatz.

Danke

sonoff.0
2022-11-26 19:08:43.454	silly	States system redis pmessage system.adapter.sonoff.0.logLevel/system.adapter.sonoff.0.logLevel:{"val":"silly","ack":true,"ts":1669486123413,"q":0,"from":"system.adapter.sonoff.0","lc":1669483231514}

sonoff.0
2022-11-26 19:08:43.438	debug	stateChange sonoff.0.info.connection: {"val":"","ack":true,"ts":1669486123434,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1669323779944}

sonoff.0
2022-11-26 19:08:43.436	silly	States user redis pmessage sonoff.0.*/sonoff.0.info.connection:{"val":"","ack":true,"ts":1669486123434,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1669323779944}

sonoff.0
2022-11-26 19:08:43.426	info	Starting MQTT authenticated server on port 1885

sonoff.0
2022-11-26 19:08:43.401	info	starting. Version 2.5.1 in /opt/iobroker/node_modules/iobroker.sonoff, node: v12.22.7, js-controller: 3.2.16

sonoff.0
2022-11-26 19:08:43.337	debug	Plugin sentry Initialize Plugin (enabled=true)

sonoff.0
2022-11-26 19:08:43.247	debug	statesDB connected

sonoff.0
2022-11-26 19:08:43.246	debug	States connected to redis: 127.0.0.1:9000

sonoff.0
2022-11-26 19:08:43.200	debug	States create User PubSub Client

sonoff.0
2022-11-26 19:08:43.200	debug	States create System PubSub Client

sonoff.0
2022-11-26 19:08:43.196	debug	Redis States: Use Redis connection: 127.0.0.1:9000

sonoff.0
2022-11-26 19:08:43.196	debug	objectDB connected

sonoff.0
2022-11-26 19:08:43.194	silly	redis psubscribe cfg.o.system.user.*

sonoff.0
2022-11-26 19:08:43.193	debug	Objects connected to redis: 127.0.0.1:9001

sonoff.0
2022-11-26 19:08:43.184	debug	Objects client initialize lua scripts

sonoff.0
2022-11-26 19:08:43.184	debug	Objects create User PubSub Client

sonoff.0
2022-11-26 19:08:43.183	debug	Objects create System PubSub Client

sonoff.0
2022-11-26 19:08:43.182	debug	Objects client ready ... initialize now

sonoff.0
2022-11-26 19:08:43.171	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

sonoff.0
2022-11-26 19:08:41.853	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

sonoff.0
2022-11-26 19:08:41.852	debug	Plugin sentry destroyed

sonoff.0
2022-11-26 19:08:41.852	info	terminating

sonoff.0
2022-11-26 19:08:41.851	info	Got terminate signal TERMINATE_YOURSELF

sonoff.0
2022-11-26 19:08:41.851	silly	States system redis pmessage system.adapter.sonoff.0.sigKill/system.adapter.sonoff.0.sigKill:{"val":-1,"ack":false,"ts":1669486121850,"q":0,"from":"system.host.IOBROKER","lc":1669486121850}

Glasfaser

@goetschhofer

Im Log ist nichts zu erkennen.

Zeige Screenshot von
-Instanzeinstellung Sonoff
-Sonoff Steckdose Mqtt Einstellung

crunchip

@goetschhofer sagte in SONOFF Adapter in Kollision mit MQTT Adapter:

Habe jetzt die IP-Adresse geändert, BN + PW nochmals neu vergeben

die müssen aber identisch sein im sonoff Adapter als auch auf deinen Geräten, wenn der sonoff auf 1885 steht, dann lass das so und eben auch bei den Geräten so eingeben

GOETSCHHOFER

@glasfaser said in SONOFF Adapter in Kollision mit MQTT Adapter:

@goetschhofer

Im Log ist nichts zu erkennen.

Zeige Screenshot von
-Instanzeinstellung Sonoff
-Sonoff Steckdose Mqtt Einstellung

Verständnisfrage: Wenn man mehrere Sonoff-Stockdosen einsetzt, muss man dafür jeweils einen Sonoff-Adapter anlegen und wird da jeweils der gleiche Port verwendet ?
Könnte man die Steckdose auch über den mqtt-Adapter verbinden und auslesen ? Nur wird hier ja der Port: 1883 schon verwendet.

Vielen Dank

Warum zeigt er hier einen Port: 9000 u. 9001 ?

	2022-11-26 22:18:50.721	debug	States connected to redis: 127.0.0.1:9000

sonoff.0
2022-11-26 22:18:50.717	debug	States create User PubSub Client

sonoff.0
2022-11-26 22:18:50.716	debug	States create System PubSub Client

sonoff.0
2022-11-26 22:18:50.712	debug	Redis States: Use Redis connection: 127.0.0.1:9000

sonoff.0
2022-11-26 22:18:50.712	debug	objectDB connected

sonoff.0
2022-11-26 22:18:50.709	silly	redis psubscribe cfg.o.system.user.*

sonoff.0
2022-11-26 22:18:50.708	debug	Objects connected to redis: 127.0.0.1:9001

sonoff.0
2022-11-26 22:18:50.697	debug	Objects client initialize lua scripts

sonoff.0
2022-11-26 22:18:50.696	debug	Objects create User PubSub Client

sonoff.0
2022-11-26 22:18:50.696	debug	Objects create System PubSub Client

sonoff.0
2022-11-26 22:18:50.695	debug	Objects client ready ... initialize now

sonoff.0
2022-11-26 22:18:50.681	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

2022-11-26 22:23:15.457	silly	States system redis pmessage system.adapter.sonoff.0.logLevel/system.adapter.sonoff.0.logLevel:{"val":"silly","ack":true,"ts":1669497795417,"q":0,"from":"system.adapter.sonoff.0","lc":1669483231514}

sonoff.0
2022-11-26 22:23:15.437	debug	stateChange sonoff.0.info.connection: {"val":"","ack":true,"ts":1669497795435,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1669323779944}

sonoff.0
2022-11-26 22:23:15.436	silly	States user redis pmessage sonoff.0.*/sonoff.0.info.connection:{"val":"","ack":true,"ts":1669497795435,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1669323779944}

sonoff.0
2022-11-26 22:23:15.427	info	Starting MQTT authenticated server on port 1885

sonoff.0
2022-11-26 22:23:15.405	info	starting. Version 2.5.1 in /opt/iobroker/node_modules/iobroker.sonoff, node: v12.22.7, js-controller: 3.2.16

sonoff.0
2022-11-26 22:23:15.340	debug	Plugin sentry Initialize Plugin (enabled=true)

sonoff.0
2022-11-26 22:23:15.263	debug	statesDB connected

sonoff.0
2022-11-26 22:23:15.262	debug	States connected to redis: 127.0.0.1:9000

sonoff.0
2022-11-26 22:23:15.258	debug	States create User PubSub Client

sonoff.0
2022-11-26 22:23:15.258	debug	States create System PubSub Client

sonoff.0
2022-11-26 22:23:15.254	debug	Redis States: Use Redis connection: 127.0.0.1:9000

sonoff.0
2022-11-26 22:23:15.253	debug	objectDB connected

sonoff.0
2022-11-26 22:23:15.251	silly	redis psubscribe cfg.o.system.user.*

sonoff.0
2022-11-26 22:23:15.249	debug	Objects connected to redis: 127.0.0.1:9001

sonoff.0
2022-11-26 22:23:15.238	debug	Objects client initialize lua scripts

sonoff.0
2022-11-26 22:23:15.237	debug	Objects create User PubSub Client

sonoff.0
2022-11-26 22:23:15.237	debug	Objects create System PubSub Client

sonoff.0
2022-11-26 22:23:15.236	debug	Objects client ready ... initialize now

sonoff.0
2022-11-26 22:23:15.219	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

sonoff.0
2022-11-26 22:23:08.600	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

sonoff.0
2022-11-26 22:23:08.600	debug	Plugin sentry destroyed

sonoff.0
2022-11-26 22:23:08.600	info	terminating

sonoff.0
2022-11-26 22:23:08.599	info	Got terminate signal TERMINATE_YOURSELF

sonoff.0
2022-11-26 22:23:08.598	silly	States system redis pmessage system.adapter.sonoff.0.sigKill/system.adapter.sonoff.0.sigKill:{"val":-1,"ack":false,"ts":1669497788597,"q":0,"from":"system.host.IOBROKER","lc":1669497788597}

GOETSCHHOFER

@crunchip said in SONOFF Adapter in Kollision mit MQTT Adapter:

@goetschhofer sagte in SONOFF Adapter in Kollision mit MQTT Adapter:

Habe jetzt die IP-Adresse geändert, BN + PW nochmals neu vergeben

die müssen aber identisch sein im sonoff Adapter als auch auf deinen Geräten, wenn der sonoff auf 1885 steht, dann lass das so und eben auch bei den Geräten so eingeben

Ja, die PW habe ich nochmals neu eingegeben, sind ident.

haselchen

@goetschhofer

Port ist immer der gleiche bei den Dosen einzugeben.
Genauso wie User und Passwort .
Du brauchst nur 1 Sonoff Adapter. Die Datenpunkte werden automatisch angelegt .
Ich hab 13 von den Gosund Dosen.

Dosen und Sonoff Adapter haben beide die gleichen Ports und User und Passwort (um das nochmal deutlich zu machen )

GOETSCHHOFER

@haselchen
Vielen Dank für die Klarstellung.

Welche Bedeutung hat dieses Webadmin PW ? Habe ich nicht eingegeben.

Hier habe ich die Fehlermeldung in der console auf der Steckdose
22:30:20.453 MQT: Attempting connection...
22:30:20.672 MQT: Connect failed to 192.168.1.196:1885, rc -2. Retry in 120 sec

22:28:55.589 RSL: SENSOR = {"Time":"2022-11-26T22:28:55","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":218,"Current":0.000}}
22:29:05.598 RSL: STATE = {"Time":"2022-11-26T22:29:05","Uptime":"0T00:12:08","UptimeSec":728,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-47,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:29:05.607 RSL: SENSOR = {"Time":"2022-11-26T22:29:05","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":218,"Current":0.000}}
22:29:15.590 RSL: STATE = {"Time":"2022-11-26T22:29:15","Uptime":"0T00:12:18","UptimeSec":738,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-47,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:29:15.599 RSL: SENSOR = {"Time":"2022-11-26T22:29:15","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":218,"Current":0.000}}
22:29:25.607 RSL: STATE = {"Time":"2022-11-26T22:29:25","Uptime":"0T00:12:28","UptimeSec":748,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-49,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:29:25.616 RSL: SENSOR = {"Time":"2022-11-26T22:29:25","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":218,"Current":0.000}}
22:29:35.610 RSL: STATE = {"Time":"2022-11-26T22:29:35","Uptime":"0T00:12:38","UptimeSec":758,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-49,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:29:35.619 RSL: SENSOR = {"Time":"2022-11-26T22:29:35","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":219,"Current":0.000}}
22:29:45.595 RSL: STATE = {"Time":"2022-11-26T22:29:45","Uptime":"0T00:12:48","UptimeSec":768,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-50,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:29:45.603 RSL: SENSOR = {"Time":"2022-11-26T22:29:45","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":218,"Current":0.000}}
22:29:55.588 RSL: STATE = {"Time":"2022-11-26T22:29:55","Uptime":"0T00:12:58","UptimeSec":778,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-49,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:29:55.597 RSL: SENSOR = {"Time":"2022-11-26T22:29:55","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":218,"Current":0.000}}
22:30:05.565 RSL: STATE = {"Time":"2022-11-26T22:30:05","Uptime":"0T00:13:08","UptimeSec":788,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-48,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:30:05.574 RSL: SENSOR = {"Time":"2022-11-26T22:30:05","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":219,"Current":0.000}}
22:30:15.581 RSL: STATE = {"Time":"2022-11-26T22:30:15","Uptime":"0T00:13:18","UptimeSec":798,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-45,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:30:15.590 RSL: SENSOR = {"Time":"2022-11-26T22:30:15","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":218,"Current":0.000}}
22:30:20.453 MQT: Attempting connection...
22:30:20.672 MQT: Connect failed to 192.168.1.196:1885, rc -2. Retry in 120 sec
22:30:25.591 RSL: STATE = {"Time":"2022-11-26T22:30:25","Uptime":"0T00:13:28","UptimeSec":808,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-46,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:30:25.600 RSL: SENSOR = {"Time":"2022-11-26T22:30:25","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":218,"Current":0.000}}
22:30:35.607 RSL: STATE = {"Time":"2022-11-26T22:30:35","Uptime":"0T00:13:38","UptimeSec":818,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 US-2,4 GHz","BSSId":"DC:39:6F:DB:30:7F","Channel":6,"Mode":"11n","RSSI":100,"Signal":-46,"LinkCount":1,"Downtime":"0T00:00:03"}}
22:30:35.616 RSL: SENSOR = {"Time":"2022-11-26T22:30:35","ENERGY":{"TotalStartTime":"2022-11-26T18:09:02","Total":3.284,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"ApparentPower": 0,"ReactivePower": 0,"Factor":0.00,"Voltage":219,"Current":0.000}}

haselchen

@goetschhofer

Wie sehen deine Einstellungen im Sonoff Adapter aus?

Chaot

@goetschhofer Läuft dein ioBroker auf der 192.168.1.196 ?
Und woher hast du die Tasmota Version. Die Kennung kenne ich zwar, habe sie aber noch nie in freier Wildbahn gesehen.

GOETSCHHOFER

@chaot @haselchen @Glasfaser @crunchip

Sorry, habe jetzt den Fehler gefunden, hier habe ich mir selbst eine Falle gestellt. :rage:
Ich habe bei host die IP-Adresse der Steckdose eingetragen, anstatt die IP-Adresse des ioBrokers.

Ab Min. 14:30, bei Min.19:33 hat es klick gemacht. :blush:
https://www.youtube.com/watch?v=16V87HQTz3M

In diesem Video wird auch erläutert, wie man die Steckdose kalibriert.
Macht ihr eine Kalibrierung in der Console ? Ab Min. 15:30

VoltageSet
PowerSet
CurrentSet

Vielen Dank an Alle.

GOETSCHHOFER

@chaot: Und woher hast du die Tasmota Version. Die Kennung kenne ich zwar, habe sie aber noch nie in freier Wildbahn gesehen.

Ich habe die Steckdose von der FH-Kiel erhalten, da ich hier am Projekt IntelliGrid mitmache.

haselchen

@goetschhofer

Kalibrierung habe ich über eine Profi Strom Meßsteckdose gemacht .
Und dann ein Gerät eingesteckt , welches z.B. 100 Watt verbraucht . Das geht am Einfachsten.

Chaot

@goetschhofer Du solltest der Dose ein Update verpassen. Die Firmware da drauf ist fast ein Jahr alt und soweit ich mich erinnere wurde da dann noch einiges gemacht im Bereich der Strommessung. Klär das aber kurz mit denen ab ob sie die Firmware für ihre Zwecke angepasst haben.
Kalibrierung ist notwendig. Sinnvollerweise mit einer 60 oder 100 W Glühbirne. Mit einer LED ist das nicht so genau. Zumindest bei mir gab es da nach oben hin recht große Abweichungen.
Im Idealfall wird die Glühbirne noch vorher ausgemessen. Aber in der Realität weichen die Dosen sowieso um ein paar Prozent ab. Deshalb ist das hier nicht so zwingend.

Community Forum

NEWS

SONOFF Adapter in Kollision mit MQTT Adapter

Support us

364

32.6k

82.2k

1.3m