Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. ioBroker Allgemein
  4. Innogy Adapter im lokalen Netzt bleibt Gelb

NEWS

  • Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄
    BluefoxB
    Bluefox
    11
    1
    523

  • Weihnachtsangebot 2025! 🎄
    BluefoxB
    Bluefox
    24
    1
    1.7k

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    9.6k

Innogy Adapter im lokalen Netzt bleibt Gelb

Geplant Angeheftet Gesperrt Verschoben ioBroker Allgemein
118 Beiträge 5 Kommentatoren 12.6k Aufrufe 4 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • S scout1978

    @thomas-braun innogy1.PNG

    Thomas BraunT Online
    Thomas BraunT Online
    Thomas Braun
    Most Active
    schrieb am zuletzt editiert von
    #5

    @scout1978
    Bitte die Ausgaben zu den beiden Befehlszeilen.
    Und LogFile nicht als Screenshot sondern in Textform (in CodeTags eingebettet) hier rein.

    Das hast du gelesen?

    Please note: For the Authentication process Port 3000 is needed to be available om the host. Please check that nothing else is using it (e.g. Grafana)

    Linux-Werkzeugkasten:
    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
    NodeJS Fixer Skript:
    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

    S 1 Antwort Letzte Antwort
    0
    • Thomas BraunT Thomas Braun

      @scout1978
      Bitte die Ausgaben zu den beiden Befehlszeilen.
      Und LogFile nicht als Screenshot sondern in Textform (in CodeTags eingebettet) hier rein.

      Das hast du gelesen?

      Please note: For the Authentication process Port 3000 is needed to be available om the host. Please check that nothing else is using it (e.g. Grafana)

      S Offline
      S Offline
      scout1978
      schrieb am zuletzt editiert von
      #6

      @thomas-braun
      Ja Entschuldigung. Möchtest Du das Ergebnis aus der Konsole? Was sind CodeTags?

      Thomas BraunT 1 Antwort Letzte Antwort
      0
      • S scout1978

        @thomas-braun
        Ja Entschuldigung. Möchtest Du das Ergebnis aus der Konsole? Was sind CodeTags?

        Thomas BraunT Online
        Thomas BraunT Online
        Thomas Braun
        Most Active
        schrieb am zuletzt editiert von
        #7

        @scout1978 sagte in Innogy Adapter im lokalen Netzt bleibt Gelb:

        Möchtest Du das Ergebnis aus der Konsole? Was sind CodeTags?

        Ja. CodeTags:
        42b5b5af-6423-4f3a-973a-e57612666ae5-grafik.png

        Text zwischen die Steuerzeichen kopieren.

        Linux-Werkzeugkasten:
        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
        NodeJS Fixer Skript:
        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

        S 1 Antwort Letzte Antwort
        0
        • Thomas BraunT Thomas Braun

          @scout1978 sagte in Innogy Adapter im lokalen Netzt bleibt Gelb:

          Möchtest Du das Ergebnis aus der Konsole? Was sind CodeTags?

          Ja. CodeTags:
          42b5b5af-6423-4f3a-973a-e57612666ae5-grafik.png

          Text zwischen die Steuerzeichen kopieren.

          S Offline
          S Offline
          scout1978
          schrieb am zuletzt editiert von Homoran
          #8

          @thomas-braun

          uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v                                       && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update &&                                       apt policy nodejs
          aarch64
          /usr/bin/nodejs
          /usr/bin/node
          /usr/bin/npm
          v16.17.0
          v16.17.0
          8.15.0
          4.0.23
          pi
          pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp                                      io i2c spi iobroker
          /home/pi
          Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
          Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
          Hit:3 https://phoscon.de/apt/deconz bullseye InRelease
          Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
          Hit:5 https://repos.influxdata.com/debian bullseye InRelease
          Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
          Hit:7 https://packages.grafana.com/oss/deb stable InRelease
          Reading package lists... Done
          Building dependency tree... Done
          Reading state information... Done
          13 packages can be upgraded. Run 'apt list --upgradable' to see them.
          W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
          W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
          W: Target Packages (main/binary-all/Packages) is configured multiple times in /e                                      tc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
          W: Target Translations (main/i18n/Translation-en_GB) is configured multiple time                                      s in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.                                      list:2
          W: Target Translations (main/i18n/Translation-en) is configured multiple times i                                      n /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.lis                                      t:2
          W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      3
          W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      3
          W: Target Packages (main/binary-all/Packages) is configured multiple times in /e                                      tc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
          W: Target Translations (main/i18n/Translation-en_GB) is configured multiple time                                      s in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.                                      list:3
          W: Target Translations (main/i18n/Translation-en) is configured multiple times i                                      n /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.lis                                      t:3
          W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
          W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
          W: Target Packages (main/binary-all/Packages) is configured multiple times in /e                                      tc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
          W: Target Translations (main/i18n/Translation-en_GB) is configured multiple time                                      s in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.                                      list:2
          W: Target Translations (main/i18n/Translation-en) is configured multiple times i                                      n /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.lis                                      t:2
          W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      3
          W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      3
          W: Target Packages (main/binary-all/Packages) is configured multiple times in /e                                      tc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
          W: Target Translations (main/i18n/Translation-en_GB) is configured multiple time                                      s in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.                                      list:3
          W: Target Translations (main/i18n/Translation-en) is configured multiple times i                                      n /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.lis                                      t:3
          nodejs:
           Installed: 16.17.0-deb-1nodesource1
           Candidate: 16.17.1-deb-1nodesource1
           Version table:
              16.17.1-deb-1nodesource1 500
                 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
          *** 16.17.0-deb-1nodesource1 100
                 100 /var/lib/dpkg/status
              12.22.12~dfsg-1~deb11u1 500
                 500 http://security.debian.org/debian-security bullseye-security/main ar                                      m64 Packages
          pi@raspberrypi-Iobroker:~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v                                       && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update &&                                       apt policy nodejs
          aarch64
          /usr/bin/nodejs
          /usr/bin/node
          /usr/bin/npm
          v16.17.0
          v16.17.0
          8.15.0
          4.0.23
          pi
          pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp                                      io i2c spi iobroker
          /home/pi
          Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
          Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
          Hit:3 https://phoscon.de/apt/deconz bullseye InRelease
          Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
          Hit:5 https://repos.influxdata.com/debian bullseye InRelease
          Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
          Hit:7 https://packages.grafana.com/oss/deb stable InRelease
          Reading package lists... Done
          Building dependency tree... Done
          Reading state information... Done
          13 packages can be upgraded. Run 'apt list --upgradable' to see them.
          W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
          W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      ^C@raspberrypi-Iobroker:~ $.debian.org/debian-security bullseye-security/main ar
          pi@raspberrypi-Iobroker:~ $
          
          
          Thomas BraunT 1 Antwort Letzte Antwort
          0
          • S scout1978

            @thomas-braun

            uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v                                       && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update &&                                       apt policy nodejs
            aarch64
            /usr/bin/nodejs
            /usr/bin/node
            /usr/bin/npm
            v16.17.0
            v16.17.0
            8.15.0
            4.0.23
            pi
            pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp                                      io i2c spi iobroker
            /home/pi
            Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
            Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
            Hit:3 https://phoscon.de/apt/deconz bullseye InRelease
            Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
            Hit:5 https://repos.influxdata.com/debian bullseye InRelease
            Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
            Hit:7 https://packages.grafana.com/oss/deb stable InRelease
            Reading package lists... Done
            Building dependency tree... Done
            Reading state information... Done
            13 packages can be upgraded. Run 'apt list --upgradable' to see them.
            W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
            W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
            W: Target Packages (main/binary-all/Packages) is configured multiple times in /e                                      tc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
            W: Target Translations (main/i18n/Translation-en_GB) is configured multiple time                                      s in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.                                      list:2
            W: Target Translations (main/i18n/Translation-en) is configured multiple times i                                      n /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.lis                                      t:2
            W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      3
            W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      3
            W: Target Packages (main/binary-all/Packages) is configured multiple times in /e                                      tc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
            W: Target Translations (main/i18n/Translation-en_GB) is configured multiple time                                      s in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.                                      list:3
            W: Target Translations (main/i18n/Translation-en) is configured multiple times i                                      n /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.lis                                      t:3
            W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
            W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
            W: Target Packages (main/binary-all/Packages) is configured multiple times in /e                                      tc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
            W: Target Translations (main/i18n/Translation-en_GB) is configured multiple time                                      s in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.                                      list:2
            W: Target Translations (main/i18n/Translation-en) is configured multiple times i                                      n /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.lis                                      t:2
            W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      3
            W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      3
            W: Target Packages (main/binary-all/Packages) is configured multiple times in /e                                      tc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
            W: Target Translations (main/i18n/Translation-en_GB) is configured multiple time                                      s in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.                                      list:3
            W: Target Translations (main/i18n/Translation-en) is configured multiple times i                                      n /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.lis                                      t:3
            nodejs:
             Installed: 16.17.0-deb-1nodesource1
             Candidate: 16.17.1-deb-1nodesource1
             Version table:
                16.17.1-deb-1nodesource1 500
                   500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
            *** 16.17.0-deb-1nodesource1 100
                   100 /var/lib/dpkg/status
                12.22.12~dfsg-1~deb11u1 500
                   500 http://security.debian.org/debian-security bullseye-security/main ar                                      m64 Packages
            pi@raspberrypi-Iobroker:~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v                                       && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update &&                                       apt policy nodejs
            aarch64
            /usr/bin/nodejs
            /usr/bin/node
            /usr/bin/npm
            v16.17.0
            v16.17.0
            8.15.0
            4.0.23
            pi
            pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp                                      io i2c spi iobroker
            /home/pi
            Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
            Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
            Hit:3 https://phoscon.de/apt/deconz bullseye InRelease
            Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
            Hit:5 https://repos.influxdata.com/debian bullseye InRelease
            Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
            Hit:7 https://packages.grafana.com/oss/deb stable InRelease
            Reading package lists... Done
            Building dependency tree... Done
            Reading state information... Done
            13 packages can be upgraded. Run 'apt list --upgradable' to see them.
            W: Target Packages (main/binary-arm64/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      2
            W: Target Packages (main/binary-armhf/Packages) is configured multiple times in                                       /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:                                      ^C@raspberrypi-Iobroker:~ $.debian.org/debian-security bullseye-security/main ar
            pi@raspberrypi-Iobroker:~ $
            
            
            Thomas BraunT Online
            Thomas BraunT Online
            Thomas Braun
            Most Active
            schrieb am zuletzt editiert von Thomas Braun
            #9

            @scout1978 sagte in Innogy Adapter im lokalen Netzt bleibt Gelb:

            OT, aber lösch die Doublette in der Datei /etc/apt/sources.list.d/grafana.list

            3e3957d5-5884-4dfa-b9fd-6ca27262f41b-grafik.png ```

            Linux-Werkzeugkasten:
            https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
            NodeJS Fixer Skript:
            https://forum.iobroker.net/topic/68035/iob-node-fix-skript
            iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

            S 1 Antwort Letzte Antwort
            0
            • Thomas BraunT Thomas Braun

              @scout1978 sagte in Innogy Adapter im lokalen Netzt bleibt Gelb:

              OT, aber lösch die Doublette in der Datei /etc/apt/sources.list.d/grafana.list

              3e3957d5-5884-4dfa-b9fd-6ca27262f41b-grafik.png ```

              S Offline
              S Offline
              scout1978
              schrieb am zuletzt editiert von
              #10

              @thomas-braun
              Muss die Doublette gleich raus? Das wird dann für mich nämlich schon die nächte Baustelle. Bin da nicht so ganz firm.Brauchst du den Code nochmals in den Klammern?

              Thomas BraunT HomoranH 2 Antworten Letzte Antwort
              0
              • S scout1978

                @thomas-braun
                Muss die Doublette gleich raus? Das wird dann für mich nämlich schon die nächte Baustelle. Bin da nicht so ganz firm.Brauchst du den Code nochmals in den Klammern?

                Thomas BraunT Online
                Thomas BraunT Online
                Thomas Braun
                Most Active
                schrieb am zuletzt editiert von
                #11

                @scout1978

                Lösch die Zeile halt einfach raus.
                Mit nano z.B.

                sudo nano  /etc/apt/sources.list.d/grafana.list
                

                Linux-Werkzeugkasten:
                https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                NodeJS Fixer Skript:
                https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                S 1 Antwort Letzte Antwort
                0
                • Thomas BraunT Thomas Braun

                  @scout1978

                  Lösch die Zeile halt einfach raus.
                  Mit nano z.B.

                  sudo nano  /etc/apt/sources.list.d/grafana.list
                  
                  S Offline
                  S Offline
                  scout1978
                  schrieb am zuletzt editiert von
                  #12

                  @thomas-braun said in Innogy Adapter im lokalen Netzt bleibt Gelb:

                  sudo nano /etc/apt/sources.list.d/grafana.list

                  ok hat geklappt

                  Thomas BraunT 1 Antwort Letzte Antwort
                  0
                  • S scout1978

                    @thomas-braun said in Innogy Adapter im lokalen Netzt bleibt Gelb:

                    sudo nano /etc/apt/sources.list.d/grafana.list

                    ok hat geklappt

                    Thomas BraunT Online
                    Thomas BraunT Online
                    Thomas Braun
                    Most Active
                    schrieb am zuletzt editiert von
                    #13

                    @scout1978

                    Dann patch jetzt dein System durch, inkl. upgrade von nodejs.

                    iob stop
                    sudo apt update
                    sudo apt full-upgrade
                    sudo reboot
                    

                    Linux-Werkzeugkasten:
                    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                    NodeJS Fixer Skript:
                    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                    1 Antwort Letzte Antwort
                    0
                    • S scout1978

                      @thomas-braun
                      Muss die Doublette gleich raus? Das wird dann für mich nämlich schon die nächte Baustelle. Bin da nicht so ganz firm.Brauchst du den Code nochmals in den Klammern?

                      HomoranH Nicht stören
                      HomoranH Nicht stören
                      Homoran
                      Global Moderator Administrators
                      schrieb am zuletzt editiert von Homoran
                      #14

                      @scout1978 sagte in Innogy Adapter im lokalen Netzt bleibt Gelb:

                      Brauchst du den Code nochmals in den Klammern?

                      der "Fehler" war nach dem @Thomas-Braun keine neue Zeile für di code-tags zu nehmen. hab ich gerade korrigiert

                      kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                      Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                      der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                      1 Antwort Letzte Antwort
                      0
                      • S Offline
                        S Offline
                        scout1978
                        schrieb am zuletzt editiert von
                        #15

                        @thomas-braun
                        Jetzt hab ich ausversehen node Js v18.11.0 erwischt, muss erst wieder zurück finden

                        Thomas BraunT 1 Antwort Letzte Antwort
                        0
                        • S scout1978

                          @thomas-braun
                          Jetzt hab ich ausversehen node Js v18.11.0 erwischt, muss erst wieder zurück finden

                          Thomas BraunT Online
                          Thomas BraunT Online
                          Thomas Braun
                          Most Active
                          schrieb am zuletzt editiert von Thomas Braun
                          #16

                          @scout1978
                          Wer hat denn IRGENDWAS von nodejs18 geschrieben?
                          Das ist in deinen Quellen überhaupt nicht aktiv gewesen, das KANNST du gar nicht 'erwischen'.

                          Du solltest NUR die vier Zeilen abarbeiten. Dann wäre die aktuelle Version von node16 eingespielt worden.

                          Linux-Werkzeugkasten:
                          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                          NodeJS Fixer Skript:
                          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                          S 1 Antwort Letzte Antwort
                          0
                          • Thomas BraunT Thomas Braun

                            @scout1978
                            Wer hat denn IRGENDWAS von nodejs18 geschrieben?
                            Das ist in deinen Quellen überhaupt nicht aktiv gewesen, das KANNST du gar nicht 'erwischen'.

                            Du solltest NUR die vier Zeilen abarbeiten. Dann wäre die aktuelle Version von node16 eingespielt worden.

                            S Offline
                            S Offline
                            scout1978
                            schrieb am zuletzt editiert von
                            #17

                            @thomas-braun
                            alles erledigt node Js aktuell und die 4 Zeilen abgearbeitet

                            Thomas BraunT 1 Antwort Letzte Antwort
                            0
                            • S scout1978

                              @thomas-braun
                              alles erledigt node Js aktuell und die 4 Zeilen abgearbeitet

                              Thomas BraunT Online
                              Thomas BraunT Online
                              Thomas Braun
                              Most Active
                              schrieb am zuletzt editiert von Thomas Braun
                              #18

                              @scout1978

                              Nix nacherzählen, Fakten liefern:

                              
                              uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
                              

                              Linux-Werkzeugkasten:
                              https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                              NodeJS Fixer Skript:
                              https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                              iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                              S 1 Antwort Letzte Antwort
                              0
                              • Thomas BraunT Thomas Braun

                                @scout1978

                                Nix nacherzählen, Fakten liefern:

                                
                                uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
                                
                                S Offline
                                S Offline
                                scout1978
                                schrieb am zuletzt editiert von
                                #19

                                @thomas-braun

                                :~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
                                aarch64
                                /usr/bin/nodejs
                                /usr/local/bin/node
                                /usr/local/bin/npm
                                v18.11.0
                                v16.18.0
                                8.19.2
                                4.0.23
                                pi
                                pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
                                /home/pi
                                Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
                                Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
                                Hit:3 https://repos.influxdata.com/debian bullseye InRelease
                                Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
                                Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
                                Hit:6 https://phoscon.de/apt/deconz bullseye InRelease
                                Hit:7 https://packages.grafana.com/oss/deb stable InRelease
                                Reading package lists... Done
                                Building dependency tree... Done
                                Reading state information... Done
                                All packages are up to date.
                                nodejs:
                                  Installed: 18.11.0-deb-1nodesource1
                                  Candidate: 18.11.0-deb-1nodesource1
                                  Version table:
                                 *** 18.11.0-deb-1nodesource1 100
                                        100 /var/lib/dpkg/status
                                     16.17.1-deb-1nodesource1 500
                                        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
                                     12.22.12~dfsg-1~deb11u1 500
                                        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
                                pi@raspberrypi-Iobroker:~ $ :~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
                                aarch64
                                /usr/bin/nodejs
                                /usr/local/bin/node
                                /usr/local/bin/npm
                                v18.11.0
                                v16.18.0
                                8.19.2
                                4.0.23
                                pi
                                pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
                                /home/pi
                                Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
                                Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
                                Hit:3 https://repos.influxdata.com/debian bullseye InRelease
                                Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
                                Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
                                Hit:6 https://phoscon.de/apt/deconz bullseye InRelease
                                Hit:7 https://packages.grafana.com/oss/deb stable InRelease
                                Reading package lists... Done
                                Building dependency tree... Done
                                pi@raspberrypi-Iobroker:~ $.debian.org/debian-security bullseye-
                                
                                Thomas BraunT 1 Antwort Letzte Antwort
                                0
                                • S scout1978

                                  @thomas-braun

                                  :~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
                                  aarch64
                                  /usr/bin/nodejs
                                  /usr/local/bin/node
                                  /usr/local/bin/npm
                                  v18.11.0
                                  v16.18.0
                                  8.19.2
                                  4.0.23
                                  pi
                                  pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
                                  /home/pi
                                  Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
                                  Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
                                  Hit:3 https://repos.influxdata.com/debian bullseye InRelease
                                  Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
                                  Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
                                  Hit:6 https://phoscon.de/apt/deconz bullseye InRelease
                                  Hit:7 https://packages.grafana.com/oss/deb stable InRelease
                                  Reading package lists... Done
                                  Building dependency tree... Done
                                  Reading state information... Done
                                  All packages are up to date.
                                  nodejs:
                                    Installed: 18.11.0-deb-1nodesource1
                                    Candidate: 18.11.0-deb-1nodesource1
                                    Version table:
                                   *** 18.11.0-deb-1nodesource1 100
                                          100 /var/lib/dpkg/status
                                       16.17.1-deb-1nodesource1 500
                                          500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
                                       12.22.12~dfsg-1~deb11u1 500
                                          500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
                                  pi@raspberrypi-Iobroker:~ $ :~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
                                  aarch64
                                  /usr/bin/nodejs
                                  /usr/local/bin/node
                                  /usr/local/bin/npm
                                  v18.11.0
                                  v16.18.0
                                  8.19.2
                                  4.0.23
                                  pi
                                  pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
                                  /home/pi
                                  Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
                                  Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
                                  Hit:3 https://repos.influxdata.com/debian bullseye InRelease
                                  Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
                                  Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
                                  Hit:6 https://phoscon.de/apt/deconz bullseye InRelease
                                  Hit:7 https://packages.grafana.com/oss/deb stable InRelease
                                  Reading package lists... Done
                                  Building dependency tree... Done
                                  pi@raspberrypi-Iobroker:~ $.debian.org/debian-security bullseye-
                                  
                                  Thomas BraunT Online
                                  Thomas BraunT Online
                                  Thomas Braun
                                  Most Active
                                  schrieb am zuletzt editiert von
                                  #20

                                  @scout1978

                                  Kannst du mir mal sagen wie du jetzt node18.11.0 und 16.18.0 'installiert' hast?

                                  Linux-Werkzeugkasten:
                                  https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                  NodeJS Fixer Skript:
                                  https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                  iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                  1 Antwort Letzte Antwort
                                  0
                                  • S Offline
                                    S Offline
                                    scout1978
                                    schrieb am zuletzt editiert von
                                    #21

                                    @thomas-braun
                                    nein

                                    Thomas BraunT 1 Antwort Letzte Antwort
                                    0
                                    • S scout1978

                                      @thomas-braun
                                      nein

                                      Thomas BraunT Online
                                      Thomas BraunT Online
                                      Thomas Braun
                                      Most Active
                                      schrieb am zuletzt editiert von
                                      #22

                                      @scout1978

                                      Warum nicht? Ist doch erst wenige Minuten her.

                                      Linux-Werkzeugkasten:
                                      https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                      NodeJS Fixer Skript:
                                      https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                      iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                      S 1 Antwort Letzte Antwort
                                      0
                                      • Thomas BraunT Thomas Braun

                                        @scout1978

                                        Warum nicht? Ist doch erst wenige Minuten her.

                                        S Offline
                                        S Offline
                                        scout1978
                                        schrieb am zuletzt editiert von
                                        #23

                                        @thomas-braun
                                        So lieber Thomas wie du wohl festgestellt hast bin ich kein Profi, und hangel mich hier irgendwie durch.
                                        Vielen Dank für Deine Hilfe aber ich glaube auf die Art komme ich hier nicht weiter.

                                        Thomas BraunT 1 Antwort Letzte Antwort
                                        0
                                        • S scout1978

                                          @thomas-braun
                                          So lieber Thomas wie du wohl festgestellt hast bin ich kein Profi, und hangel mich hier irgendwie durch.
                                          Vielen Dank für Deine Hilfe aber ich glaube auf die Art komme ich hier nicht weiter.

                                          Thomas BraunT Online
                                          Thomas BraunT Online
                                          Thomas Braun
                                          Most Active
                                          schrieb am zuletzt editiert von
                                          #24

                                          @scout1978

                                          Wie bist du denn zu den beiden Versionen gehangelt?
                                          Irgendeine Anleitung befolgt? Welche? Von alleine kommt der Kram ja nicht auf dein System.

                                          Linux-Werkzeugkasten:
                                          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                          NodeJS Fixer Skript:
                                          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                          S 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate
                                          FAQ Cloud / IOT
                                          HowTo: Node.js-Update
                                          HowTo: Backup/Restore
                                          Downloads
                                          BLOG

                                          882

                                          Online

                                          32.5k

                                          Benutzer

                                          81.8k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe