Test Adapter Mihome-vacuum v3.1.6 Next Generarition

bob der 1.

Also ansich nicht unbedingt unmöglich,leider kann ich da nicht helfen,bei der ,"Übersetzung".....da bin ich raus.
Bzw hat mit das noch nie jemand gezeigt,oder gesagt wie und was da gebraucht wird

Es ist aber eben so das viele miterweile auf Dreame fahren und klar auch im Broker den Sauger wollen.

@Sushibomba

Kleine Sachen gehen mit dem Echoskill....
Mehr da musste über HA gehen,was aber immer nich nicht alles kann...

Siehe hier nach:
https://forum.iobroker.net/topic/35557/dreame-f9-saugroboter-xiaomi-mihome-vacuum/12

Sushibomba

@bob-der-1
Ah ok ja schade. Wollte nicht HomeAssistant installieren damit ich meinen Dreame steuern kann per Alexa.
Naja dann heißt es wohl warten bis entweder wer uns erklärt was wir genau machen müssen oder jemand einen funktionierende Integration in den Xiaomi Adapter hin bekommt.

bob der 1.

@sushibomba

Start via Echoskill geht ja
....

MichaelF

Hi,

ich hab ein Roborock s7 der Adapter funktioniert bis auf die Karte.

Diese wird einmal aktualisiert und dann hängt sich der ganze Adapter auf, Speicherkarte des Pi´s läuft voll.

Nach meiner Recherche geht wohl nur ein 64 bit System, ist das so ? oder habe ich noch irgendwas irgendwo falsch gemacht ???

Grüße

Spezialtrick

@meistertr Könntest du das anhand eines Beispiels etwas genauer erläutern? Ich würde gerne den Dreame z10 Pro einbauen.

Wenn nur das File gebaut werden muss, klingt es für mich nach Fleißarbeit. Oder sehe ich das falsch?

Vumer

Hallo zusammen,

Kann man mit dem Adapter dem Roboter in Stand-by-Modus schicken?

Roborock Q7 Max
roborock.vacuum.a38
mihome-vacuum 3.6.0

nu_81

Hallo zusammen,

habe einen gerooteten S50 mit Firmware 3.3.9_001856.
Hiermit steuere ich über das Objekt "ZoneClean" mit verschiedenen Parametern. z.B. [23265,26335,24965,28485,1] die zu steuernden Bereiche.

Dies hat bisher auch immer funktioniert, seit ein paar Wochen funktioniert dies jedoch nur noch sporadisch.
Im Log erscheint:
"should trigger cleaning zone [23265,26335,24965,28485,1] but is currently active(5). Add to queue"

Bekomme auch die Meldung wenn ich andere Koordinaten angebe.
Ein vorheriges Ausführen des Objekts "clearQueue" hilft auch nicht weiter.

Ist das irgendwie bekannt?
Was kann ich tun?

Dass rooting hat übrigens folgenden Hintergrund:
Wir nutzen den Sauger durch herumtragen in mehreren Etagen.
Habe somit die map Dateien auf dem Sauger abgespeichert und lade diese immer wenn wir eine Bereichsreinigung über Alexa ansteuern.
So weiß der Robi immer wo er ist und die Teilbereichsreinigung kann auch immer funktionieren.
Falls es mittlerweile eine bessere Möglichkeit gibt wäre ich für Tipps dankbar.

Danke!

dirkhe

@nu_81 um dir da zu helfen, brauchen wir das debuglog. Wenn so einen zoneclean abschickst, prüft er den aktuellen status und wenn der nicht passt (weiss gerade die active stati nicht sus dem kopf), stellt er den in die queue.

nu_81

@dirkhe
Hier das gesamte Log

da_Woody

@nu_81 sagte in Test Adapter Mihome-vacuum v3.1.6 Next Generarition:

Hier das gesamte Log

mit dem pic kann keiner was anfangen.
den text kopieren und mit einfügen...

dirkhe

@nu_81 ich bräuchte noch ein bisschen mehr log von vorher, irgendwann muss der status ja auf aktiv gesetzt werden. Tip, du kannst das log als text kopieren und per </> hier einfügen.
bitte auch nochmal die adapterversion dszu schreiben

nu_81

@dirkhe

Hab den Adapter neugestartet und das Problem im Log festgehalten.
Die Version des Adapters ist v3.4.2

2022-10-02 00:46:33.409 - debug: mihome-vacuum.0 (15213) Receive <<< Helo <<< 21310020000000000705a24f6338c349ffffffffffffffffffffffffffffffff
2022-10-02 00:46:43.413 - debug: mihome-vacuum.0 (15213) Receive <<< Helo <<< 21310020000000000705a24f6338c353ffffffffffffffffffffffffffffffff
2022-10-02 00:46:44.788 - info: host.raspberrypi "system.adapter.mihome-vacuum.0" disabled
2022-10-02 00:46:44.799 - info: host.raspberrypi stopInstance system.adapter.mihome-vacuum.0 (force=false, process=true)
2022-10-02 00:46:44.811 - info: mihome-vacuum.0 (15213) Got terminate signal TERMINATE_YOURSELF
2022-10-02 00:46:44.813 - info: host.raspberrypi stopInstance system.adapter.mihome-vacuum.0 send kill signal
2022-10-02 00:46:44.815 - error: mihome-vacuum.0 (15213) Socket Close
2022-10-02 00:46:44.816 - info: mihome-vacuum.0 (15213) terminating
2022-10-02 00:46:44.817 - debug: mihome-vacuum.0 (15213) Plugin sentry destroyed
2022-10-02 00:46:44.817 - info: mihome-vacuum.0 (15213) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2022-10-02 00:46:45.488 - info: host.raspberrypi instance system.adapter.mihome-vacuum.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2022-10-02 00:46:48.004 - info: host.raspberrypi "system.adapter.mihome-vacuum.0" enabled
2022-10-02 00:46:48.436 - info: host.raspberrypi instance system.adapter.mihome-vacuum.0 started with pid 6937
2022-10-02 00:46:50.324 - debug: mihome-vacuum.0 (6937) Redis Objects: Use Redis connection: 127.0.0.1:9001
2022-10-02 00:46:50.378 - debug: mihome-vacuum.0 (6937) Objects client ready ... initialize now
2022-10-02 00:46:50.380 - debug: mihome-vacuum.0 (6937) Objects create System PubSub Client
2022-10-02 00:46:50.381 - debug: mihome-vacuum.0 (6937) Objects create User PubSub Client
2022-10-02 00:46:50.447 - debug: mihome-vacuum.0 (6937) Objects client initialize lua scripts
2022-10-02 00:46:50.454 - debug: mihome-vacuum.0 (6937) Objects connected to redis: 127.0.0.1:9001
2022-10-02 00:46:50.491 - debug: mihome-vacuum.0 (6937) Redis States: Use Redis connection: 127.0.0.1:9000
2022-10-02 00:46:50.515 - debug: mihome-vacuum.0 (6937) States create System PubSub Client
2022-10-02 00:46:50.516 - debug: mihome-vacuum.0 (6937) States create User PubSub Client
2022-10-02 00:46:50.551 - debug: mihome-vacuum.0 (6937) States connected to redis: 127.0.0.1:9000
2022-10-02 00:46:50.710 - debug: mihome-vacuum.0 (6937) Plugin sentry Initialize Plugin (enabled=true)
2022-10-02 00:46:51.113 - info: mihome-vacuum.0 (6937) starting. Version 3.4.2 in /opt/iobroker/node_modules/iobroker.mihome-vacuum, node: v14.20.0, js-controller: 4.0.23
2022-10-02 00:46:51.191 - debug: mihome-vacuum.0 (6937) Create State for deviceInfo
2022-10-02 00:46:51.192 - debug: mihome-vacuum.0 (6937) Create State for deviceInfomac
2022-10-02 00:46:51.193 - debug: mihome-vacuum.0 (6937) Create State for deviceInfomodel
2022-10-02 00:46:51.193 - debug: mihome-vacuum.0 (6937) Create State for deviceInfofw_ver
2022-10-02 00:46:51.194 - debug: mihome-vacuum.0 (6937) Create State for deviceInfowifi_signal
2022-10-02 00:46:51.195 - debug: mihome-vacuum.0 (6937) MIIO: Config: ip:192.168.2.134 token: 7870644854724e426337496a42754d47
2022-10-02 00:46:51.201 - info: mihome-vacuum.0 (6937) IOT enabled, create state
2022-10-02 00:46:51.206 - debug: mihome-vacuum.0 (6937) server started on 0.0.0.0:53421
2022-10-02 00:46:51.214 - debug: mihome-vacuum.0 (6937) Receive <<< Helo <<< 21310020000000000705a24f6338c35bffffffffffffffffffffffffffffffff
2022-10-02 00:46:51.215 - debug: mihome-vacuum.0 (6937) MAIN: Connected to device, try to get model..
2022-10-02 00:46:51.221 - debug: mihome-vacuum.0 (6937) GETMODELFROMAPI: objModel: {"val":"roborock.vacuum.s5","ack":true,"ts":1664642335233,"q":0,"from":"system.adapter.mihome-vacuum.0","user":"system.user.admin","lc":1628340109797}
2022-10-02 00:46:51.224 - debug: mihome-vacuum.0 (6937) Message= {"id":1,"method":"miIO.info"}
2022-10-02 00:46:51.237 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"partner_id":"","id":1,"code":0,"message":"ok","result":{"hw_ver":"Linux","fw_ver":"3.3.9_001856","ap":{"ssid":"FigaFigo7412","bssid":"38:10:D5:F8:28:64","rssi":-65},"netif":{"localIp":"192.168.2.134","mask":"255.255.255.0","gw":"192.168.2.1"},"model":"roborock.vacuum.s5","mac":"40:31:3C:A8:4A:D4","token":"7870644854724e426337496a42754d47","life":75542}}
2022-10-02 00:46:51.238 - debug: mihome-vacuum.0 (6937) GETMODELFROMAPI:Data: {"partner_id":"","id":1,"code":0,"message":"ok","result":{"hw_ver":"Linux","fw_ver":"3.3.9_001856","ap":{"ssid":"FigaFigo7412","bssid":"38:10:D5:F8:28:64","rssi":-65},"netif":{"localIp":"192.168.2.134","mask":"255.255.255.0","gw":"192.168.2.1"},"model":"roborock.vacuum.s5","mac":"40:31:3C:A8:4A:D4","token":"7870644854724e426337496a42754d47","life":75542}}
2022-10-02 00:46:51.239 - debug: mihome-vacuum.0 (6937) Get Device data..0
2022-10-02 00:46:51.239 - debug: mihome-vacuum.0 (6937) Get Device data from robot.. {"hw_ver":"Linux","fw_ver":"3.3.9_001856","ap":{"ssid":"FigaFigo7412","bssid":"38:10:D5:F8:28:64","rssi":-65},"netif":{"localIp":"192.168.2.134","mask":"255.255.255.0","gw":"192.168.2.1"},"model":"roborock.vacuum.s5","mac":"40:31:3C:A8:4A:D4","token":"7870644854724e426337496a42754d47","life":75542}
2022-10-02 00:46:51.318 - debug: mihome-vacuum.0 (6937) DeviceModel selected to: roborock.vacuum.s5
2022-10-02 00:46:51.320 - info: mihome-vacuum.0 (6937) select standard vacuum protocol....
2022-10-02 00:46:51.338 - debug: mihome-vacuum.0 (6937) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2022-10-02 00:46:51.432 - debug: mihome-vacuum.0 (6937) Create State for control: {"id":"mihome-vacuum.0.control"}
2022-10-02 00:46:51.447 - debug: mihome-vacuum.0 (6937) Create State for Queue: queue
2022-10-02 00:46:51.448 - debug: mihome-vacuum.0 (6937) Create State for Queue: clearQueue
2022-10-02 00:46:51.453 - info: mihome-vacuum.0 (6937) Map not selected delete states...
2022-10-02 00:46:51.454 - debug: mihome-vacuum.0 (6937) Create State done!
2022-10-02 00:46:51.455 - debug: mihome-vacuum.0 (6937) get params for stock Vacuum
2022-10-02 00:46:51.456 - debug: mihome-vacuum.0 (6937) Message= {"id":2,"method":"get_status"}
2022-10-02 00:46:51.464 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"msg_ver":2,"msg_seq":4053,"state":8,"battery":100,"clean_time":8,"clean_area":0,"error_code":0,"map_present":1,"in_cleaning":0,"in_returning":0,"in_fresh_state":1,"lab_status":1,"fan_power":60,"dnd_enabled":0}],"id":2}
2022-10-02 00:46:51.465 - debug: mihome-vacuum.0 (6937) setGetStatus {"msg_ver":2,"msg_seq":4053,"state":8,"battery":100,"clean_time":8,"clean_area":0,"error_code":0,"map_present":true,"in_cleaning":false,"in_returning":0,"in_fresh_state":1,"lab_status":1,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2022-10-02 00:46:51.514 - warn: mihome-vacuum.0 (6937) State "mihome-vacuum.0.cleanmap.actualMap" has no existing object, this might lead to an error in future versions
2022-10-02 00:46:51.584 - warn: mihome-vacuum.0 (6937) State "mihome-vacuum.0.cleanmap.mapStatus" has no existing object, this might lead to an error in future versions
2022-10-02 00:46:51.592 - debug: mihome-vacuum.0 (6937) Message= {"id":3,"method":"get_map_v1"}
2022-10-02 00:46:51.600 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":["robomap%2F117809743%2F7"],"id":3}
2022-10-02 00:46:51.601 - debug: mihome-vacuum.0 (6937) Mappointer_updated
2022-10-02 00:46:51.603 - debug: mihome-vacuum.0 (6937) Message= {"id":4,"method":"get_room_mapping"}
2022-10-02 00:46:51.611 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":"unknown_method","id":4}
2022-10-02 00:46:51.615 - debug: mihome-vacuum.0 (6937) Message= {"id":5,"method":"get_consumable"}
2022-10-02 00:46:51.618 - debug: mihome-vacuum.0 (6937) Message= {"id":6,"method":"get_network_info"}
2022-10-02 00:46:51.627 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"main_brush_work_time":163063,"side_brush_work_time":163063,"filter_work_time":34038,"sensor_dirty_time":34038}],"id":5}
2022-10-02 00:46:51.630 - debug: mihome-vacuum.0 (6937) Message= {"id":7,"method":"get_clean_summary"}
2022-10-02 00:46:51.633 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":"unknown_method","id":6}
2022-10-02 00:46:51.635 - debug: mihome-vacuum.0 (6937) Message= {"id":8,"method":"get_sound_volume"}
2022-10-02 00:46:51.644 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[3446411,45495882500,3295,[1664642862,1664642360,1664642154,1664613114,1664613111,1664472894,1664472602,1664472531,1664472412,1664472275,1664472198,1664472170,1664471353,1664471315,1664470984,1664470961,1664470888,1664461718,1664461716,1664448171]],"id":7}
2022-10-02 00:46:51.648 - debug: mihome-vacuum.0 (6937) Message= {"id":9,"method":"get_clean_record","params":[1664642862]}
2022-10-02 00:46:51.652 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[90],"id":8}
2022-10-02 00:46:51.654 - debug: mihome-vacuum.0 (6937) Message= {"id":10,"method":"get_multi_maps_list"}
2022-10-02 00:46:51.665 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664642862,1664642871,8,0,0,0]],"id":9}
2022-10-02 00:46:51.668 - debug: mihome-vacuum.0 (6937) Message= {"id":11,"method":"get_clean_record","params":[1664642360]}
2022-10-02 00:46:51.671 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":"unknown_method","id":10}
2022-10-02 00:46:51.672 - debug: mihome-vacuum.0 (6937) Startup: getMultiMapsList Answer: true
2022-10-02 00:46:51.673 - debug: mihome-vacuum.0 (6937) Startup: Delete getMultiMapsList
2022-10-02 00:46:51.673 - debug: mihome-vacuum.0 (6937) Message= {"id":12,"method":"get_clean_summary"}
2022-10-02 00:46:51.675 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664642360,1664642370,9,0,4,0]],"id":11}
2022-10-02 00:46:51.677 - debug: mihome-vacuum.0 (6937) Message= {"id":13,"method":"get_clean_record","params":[1664642154]}
2022-10-02 00:46:51.686 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[3446411,45495882500,3295,[1664642862,1664642360,1664642154,1664613114,1664613111,1664472894,1664472602,1664472531,1664472412,1664472275,1664472198,1664472170,1664471353,1664471315,1664470984,1664470961,1664470888,1664461718,1664461716,1664448171]],"id":12}
2022-10-02 00:46:51.688 - debug: mihome-vacuum.0 (6937) Startup: setGetCleanSummary Answer: true
2022-10-02 00:46:51.689 - debug: mihome-vacuum.0 (6937) Startup: Delete setGetCleanSummary
2022-10-02 00:46:51.690 - debug: mihome-vacuum.0 (6937) Message= {"id":14,"method":"get_consumable"}
2022-10-02 00:46:51.693 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664642154,1664642156,2,0,0,0]],"id":13}
2022-10-02 00:46:51.694 - debug: mihome-vacuum.0 (6937) Message= {"id":15,"method":"get_clean_record","params":[1664613114]}
2022-10-02 00:46:51.704 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"main_brush_work_time":163063,"side_brush_work_time":163063,"filter_work_time":34038,"sensor_dirty_time":34038}],"id":14}
2022-10-02 00:46:51.706 - debug: mihome-vacuum.0 (6937) Startup: setGetConsumable Answer: true
2022-10-02 00:46:51.707 - debug: mihome-vacuum.0 (6937) Startup: Delete setGetConsumable
2022-10-02 00:46:51.707 - debug: mihome-vacuum.0 (6937) Message= {"id":16,"method":"get_map_v1"}
2022-10-02 00:46:51.709 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664613114,1664616245,3131,46390000,0,1]],"id":15}
2022-10-02 00:46:51.711 - debug: mihome-vacuum.0 (6937) Message= {"id":17,"method":"get_clean_record","params":[1664613111]}
2022-10-02 00:46:51.713 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":["robomap%2F117809743%2F7"],"id":16}
2022-10-02 00:46:51.714 - debug: mihome-vacuum.0 (6937) Mappointer_updated
2022-10-02 00:46:51.715 - debug: mihome-vacuum.0 (6937) Message= {"id":18,"method":"get_carpet_mode"}
2022-10-02 00:46:51.741 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664613111,1664613113,2,0,0,0]],"id":17}
2022-10-02 00:46:51.742 - debug: mihome-vacuum.0 (6937) Message= {"id":19,"method":"get_clean_record","params":[1664472894]}
2022-10-02 00:46:51.744 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"enable":0,"current_integral":0,"current_high":0,"current_low":0,"stall_time":10}],"id":18}
2022-10-02 00:46:51.746 - info: mihome-vacuum.0 (6937) create state for carpet_mode
2022-10-02 00:46:51.747 - debug: mihome-vacuum.0 (6937) Message= {"id":20,"method":"get_carpet_mode"}
2022-10-02 00:46:51.769 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664472894,1664472904,10,0,0,1]],"id":19}
2022-10-02 00:46:51.770 - debug: mihome-vacuum.0 (6937) Message= {"id":21,"method":"get_clean_record","params":[1664472602]}
2022-10-02 00:46:51.772 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"enable":0,"current_integral":0,"current_high":0,"current_low":0,"stall_time":10}],"id":20}
2022-10-02 00:46:51.783 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664472602,1664472881,41,122500,0,0]],"id":21}
2022-10-02 00:46:51.785 - debug: mihome-vacuum.0 (6937) Message= {"id":22,"method":"get_clean_record","params":[1664472531]}
2022-10-02 00:46:51.796 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664472531,1664472537,6,0,0,0]],"id":22}
2022-10-02 00:46:51.797 - debug: mihome-vacuum.0 (6937) Message= {"id":23,"method":"get_clean_record","params":[1664472412]}
2022-10-02 00:46:51.804 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664472412,1664472530,8,0,0,0]],"id":23}
2022-10-02 00:46:51.805 - debug: mihome-vacuum.0 (6937) Message= {"id":24,"method":"get_clean_record","params":[1664472275]}
2022-10-02 00:46:51.812 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664472275,1664472321,46,0,0,0]],"id":24}
2022-10-02 00:46:51.813 - debug: mihome-vacuum.0 (6937) Message= {"id":25,"method":"get_clean_record","params":[1664472198]}
2022-10-02 00:46:51.820 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664472198,1664472214,16,0,0,0]],"id":25}
2022-10-02 00:46:51.821 - debug: mihome-vacuum.0 (6937) Message= {"id":26,"method":"get_clean_record","params":[1664472170]}
2022-10-02 00:46:51.831 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664472170,1664472173,3,0,0,0]],"id":26}
2022-10-02 00:46:51.832 - debug: mihome-vacuum.0 (6937) Message= {"id":27,"method":"get_clean_record","params":[1664471353]}
2022-10-02 00:46:51.850 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664471353,1664472170,6,0,0,0]],"id":27}
2022-10-02 00:46:51.852 - debug: mihome-vacuum.0 (6937) Message= {"id":28,"method":"get_clean_record","params":[1664471315]}
2022-10-02 00:46:51.861 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664471315,1664471329,14,0,0,0]],"id":28}
2022-10-02 00:46:51.862 - debug: mihome-vacuum.0 (6937) Message= {"id":29,"method":"get_clean_record","params":[1664470984]}
2022-10-02 00:46:51.868 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664470984,1664471003,19,0,0,0]],"id":29}
2022-10-02 00:46:51.869 - debug: mihome-vacuum.0 (6937) Message= {"id":30,"method":"get_clean_record","params":[1664470961]}
2022-10-02 00:46:51.877 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664470961,1664470962,1,0,0,0]],"id":30}
2022-10-02 00:46:51.878 - debug: mihome-vacuum.0 (6937) Message= {"id":31,"method":"get_clean_record","params":[1664470888]}
2022-10-02 00:46:51.886 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664470888,1664470890,1,0,0,0]],"id":31}
2022-10-02 00:46:51.887 - debug: mihome-vacuum.0 (6937) Message= {"id":32,"method":"get_clean_record","params":[1664461718]}
2022-10-02 00:46:51.897 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664461718,1664464657,2939,46382500,0,1]],"id":32}
2022-10-02 00:46:51.898 - debug: mihome-vacuum.0 (6937) Message= {"id":33,"method":"get_clean_record","params":[1664461716]}
2022-10-02 00:46:51.907 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664461716,1664461717,1,0,0,0]],"id":33}
2022-10-02 00:46:51.908 - debug: mihome-vacuum.0 (6937) Message= {"id":34,"method":"get_clean_record","params":[1664448171]}
2022-10-02 00:46:51.914 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[[1664448171,1664448173,2,0,0,0]],"id":34}
2022-10-02 00:46:51.915 - debug: mihome-vacuum.0 (6937) finish logs all [{"Datum":"1.10","Start":"18:47","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"1.10","Start":"18:39","Saugzeit":"0 min","Fläche":"0 m²","Error":4,"Ende":false},{"Datum":"1.10","Start":"18:35","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"1.10","Start":"10:31","Saugzeit":"52 min","Fläche":"46.39 m²","Error":0,"Ende":true},{"Datum":"1.10","Start":"10:31","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:34","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":true},{"Datum":"29.9","Start":"19:30","Saugzeit":"1 min","Fläche":"0.12 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:28","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:26","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:24","Saugzeit":"1 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:23","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:22","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:09","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:08","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:03","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:02","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"19:01","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"16:28","Saugzeit":"49 min","Fläche":"46.38 m²","Error":0,"Ende":true},{"Datum":"29.9","Start":"16:28","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"29.9","Start":"12:42","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false}]
2022-10-02 00:46:51.923 - info: mihome-vacuum.0 (6937) settest next timer: not available
2022-10-02 00:47:01.223 - debug: mihome-vacuum.0 (6937) Receive <<< Helo <<< 21310020000000000705a24f6338c365ffffffffffffffffffffffffffffffff
2022-10-02 00:47:08.877 - debug: mihome-vacuum.0 (6937) command: start parent: control
2022-10-02 00:47:08.883 - debug: mihome-vacuum.0 (6937) start Cleaning: 5 MObj: {}
2022-10-02 00:47:08.885 - info: mihome-vacuum.0 (6937) trigger cleaning all
2022-10-02 00:47:08.886 - debug: mihome-vacuum.0 (6937) Message= {"id":35,"method":"app_start"}
2022-10-02 00:47:08.896 - debug: mihome-vacuum.0 (6937) We are in onMessage:{"command":"startVacuuming","message":null,"from":"system.adapter.mihome-vacuum.0","_id":43856167}
2022-10-02 00:47:08.898 - debug: mihome-vacuum.0 (6937) Message= {"id":36,"method":"app_start"}
2022-10-02 00:47:08.912 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":["ok"],"id":35}
2022-10-02 00:47:08.915 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":["ok"],"id":36}
2022-10-02 00:47:10.917 - debug: mihome-vacuum.0 (6937) ERROR at setGetStatus: TypeError: Cannot read property 'sendMessage' of undefined
2022-10-02 00:47:11.867 - debug: mihome-vacuum.0 (6937) get params for stock Vacuum
2022-10-02 00:47:11.868 - debug: mihome-vacuum.0 (6937) Message= {"id":37,"method":"get_status"}
2022-10-02 00:47:12.086 - debug: mihome-vacuum.0 (6937) Receive <<< Helo <<< 21310020000000000705a24f6338c370ffffffffffffffffffffffffffffffff
2022-10-02 00:47:12.090 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"msg_ver":2,"msg_seq":4055,"state":5,"battery":100,"clean_time":8,"clean_area":0,"error_code":0,"map_present":1,"in_cleaning":1,"in_returning":0,"in_fresh_state":0,"lab_status":1,"fan_power":60,"dnd_enabled":0}],"id":37}
2022-10-02 00:47:12.093 - debug: mihome-vacuum.0 (6937) setGetStatus {"msg_ver":2,"msg_seq":4055,"state":5,"battery":100,"clean_time":8,"clean_area":0,"error_code":0,"map_present":true,"in_cleaning":true,"in_returning":0,"in_fresh_state":0,"lab_status":1,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2022-10-02 00:47:12.096 - debug: mihome-vacuum.0 (6937) Message= {"id":38,"method":"get_network_info"}
2022-10-02 00:47:12.109 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":"unknown_method","id":38}
2022-10-02 00:47:12.111 - debug: mihome-vacuum.0 (6937) Message= {"id":39,"method":"get_sound_volume"}
2022-10-02 00:47:12.122 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[90],"id":39}
2022-10-02 00:47:12.124 - debug: mihome-vacuum.0 (6937) Message= {"id":40,"method":"get_map_v1"}
2022-10-02 00:47:12.137 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":["robomap%2F117809743%2F9"],"id":40}
2022-10-02 00:47:12.139 - debug: mihome-vacuum.0 (6937) Mappointer_updated
2022-10-02 00:47:12.140 - debug: mihome-vacuum.0 (6937) Message= {"id":41,"method":"get_carpet_mode"}
2022-10-02 00:47:12.154 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"enable":0,"current_integral":0,"current_high":0,"current_low":0,"stall_time":10}],"id":41}
2022-10-02 00:47:12.648 - debug: mihome-vacuum.0 (6937) command: spotclean parent: control
2022-10-02 00:47:12.649 - debug: mihome-vacuum.0 (6937) start Cleaning: 11 MObj: {}
2022-10-02 00:47:12.649 - info: mihome-vacuum.0 (6937) should trigger cleaning spot , but is currently active(5). Add to queue
2022-10-02 00:47:22.092 - debug: mihome-vacuum.0 (6937) Receive <<< Helo <<< 21310020000000000705a24f6338c37affffffffffffffffffffffffffffffff
2022-10-02 00:47:30.842 - debug: mihome-vacuum.0 (6937) command: zoneClean parent: control
2022-10-02 00:47:30.846 - debug: mihome-vacuum.0 (6937) We are in onMessage:{"command":"cleanZone","message":"[23265,26335,24965,28485,1]","from":"system.adapter.mihome-vacuum.0","_id":43856168}
2022-10-02 00:47:30.852 - debug: mihome-vacuum.0 (6937) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2022-10-02 00:47:30.895 - debug: mihome-vacuum.0 (6937) search channels for [23265,26335,24965,28485,1] ->
2022-10-02 00:47:30.896 - debug: mihome-vacuum.0 (6937) We are in onMessage:{"command":"cleanZone","message":"[23265,26335,24965,28485,1]","from":"system.adapter.mihome-vacuum.0","_id":43856168,"zones":["[23265,26335,24965,28485,1]"],"channels":null}
2022-10-02 00:47:30.897 - debug: mihome-vacuum.0 (6937) start Cleaning: 17 MObj: {"command":"cleanZone","message":"[23265,26335,24965,28485,1]","from":"system.adapter.mihome-vacuum.0","_id":43856168,"zones":["[23265,26335,24965,28485,1]"],"channels":null}
2022-10-02 00:47:30.897 - info: mihome-vacuum.0 (6937) should trigger cleaning zone [23265,26335,24965,28485,1], but is currently active(5). Add to queue
2022-10-02 00:47:32.096 - debug: mihome-vacuum.0 (6937) Receive <<< Helo <<< 21310020000000000705a24f6338c384ffffffffffffffffffffffffffffffff
2022-10-02 00:47:32.270 - debug: mihome-vacuum.0 (6937) get params for stock Vacuum
2022-10-02 00:47:32.274 - debug: mihome-vacuum.0 (6937) Message= {"id":42,"method":"get_status"}
2022-10-02 00:47:32.285 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"msg_ver":2,"msg_seq":4065,"state":10,"battery":100,"clean_time":12,"clean_area":140000,"error_code":0,"map_present":1,"in_cleaning":1,"in_returning":0,"in_fresh_state":0,"lab_status":1,"fan_power":60,"dnd_enabled":0}],"id":42}
2022-10-02 00:47:32.286 - debug: mihome-vacuum.0 (6937) setGetStatus {"msg_ver":2,"msg_seq":4065,"state":10,"battery":100,"clean_time":12,"clean_area":140000,"error_code":0,"map_present":true,"in_cleaning":true,"in_returning":0,"in_fresh_state":0,"lab_status":1,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2022-10-02 00:47:32.287 - debug: mihome-vacuum.0 (6937) Message= {"id":43,"method":"get_network_info"}
2022-10-02 00:47:32.293 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":"unknown_method","id":43}
2022-10-02 00:47:32.294 - debug: mihome-vacuum.0 (6937) Message= {"id":44,"method":"get_sound_volume"}
2022-10-02 00:47:32.301 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[90],"id":44}
2022-10-02 00:47:32.302 - debug: mihome-vacuum.0 (6937) Message= {"id":45,"method":"get_map_v1"}
2022-10-02 00:47:32.308 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":["robomap%2F117809743%2F15"],"id":45}
2022-10-02 00:47:32.309 - debug: mihome-vacuum.0 (6937) Mappointer_updated
2022-10-02 00:47:32.310 - debug: mihome-vacuum.0 (6937) Message= {"id":46,"method":"get_carpet_mode"}
2022-10-02 00:47:32.320 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"enable":0,"current_integral":0,"current_high":0,"current_low":0,"stall_time":10}],"id":46}
2022-10-02 00:47:42.186 - debug: mihome-vacuum.0 (6937) Receive <<< Helo <<< 21310020000000000705a24f6338c38effffffffffffffffffffffffffffffff
2022-10-02 00:47:51.154 - info: fahrplan.0 (23159) Updated 2 routes, 2 enabled and 0 disabled
2022-10-02 00:47:51.155 - info: fahrplan.0 (23159) No departure timetabled defined
2022-10-02 00:47:52.192 - debug: mihome-vacuum.0 (6937) Receive <<< Helo <<< 21310020000000000705a24f6338c398ffffffffffffffffffffffffffffffff
2022-10-02 00:47:52.409 - debug: mihome-vacuum.0 (6937) get params for stock Vacuum
2022-10-02 00:47:52.410 - debug: mihome-vacuum.0 (6937) Message= {"id":47,"method":"get_status"}
2022-10-02 00:47:52.421 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"msg_ver":2,"msg_seq":4076,"state":10,"battery":100,"clean_time":12,"clean_area":140000,"error_code":0,"map_present":1,"in_cleaning":1,"in_returning":0,"in_fresh_state":0,"lab_status":1,"fan_power":60,"dnd_enabled":0}],"id":47}
2022-10-02 00:47:52.422 - debug: mihome-vacuum.0 (6937) setGetStatus {"msg_ver":2,"msg_seq":4076,"state":10,"battery":100,"clean_time":12,"clean_area":140000,"error_code":0,"map_present":true,"in_cleaning":true,"in_returning":0,"in_fresh_state":0,"lab_status":1,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2022-10-02 00:47:52.423 - debug: mihome-vacuum.0 (6937) Message= {"id":48,"method":"get_network_info"}
2022-10-02 00:47:52.433 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":"unknown_method","id":48}
2022-10-02 00:47:52.433 - debug: mihome-vacuum.0 (6937) Message= {"id":49,"method":"get_sound_volume"}
2022-10-02 00:47:52.446 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[90],"id":49}
2022-10-02 00:47:52.448 - debug: mihome-vacuum.0 (6937) Message= {"id":50,"method":"get_map_v1"}
2022-10-02 00:47:52.457 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":["robomap%2F117809743%2F5"],"id":50}
2022-10-02 00:47:52.458 - debug: mihome-vacuum.0 (6937) Mappointer_updated
2022-10-02 00:47:52.459 - debug: mihome-vacuum.0 (6937) Message= {"id":51,"method":"get_carpet_mode"}
2022-10-02 00:47:52.468 - debug: mihome-vacuum.0 (6937) MIIO RECIVE: {"result":[{"enable":0,"current_integral":0,"current_high":0,"current_low":0,"stall_time":10}],"id":51}

dirkhe

@nu_81 das scheint bei dir irgdendwie doppelt getriggert zu werden, du hast am anfang ja start gedrückt und das wurde sofort 2mal an den robbi geschickt.allerdings einmal mit fehler. Als du dann clean zone geschickt hadt, ist das verhalten ja richtig, weil er noch zugange war.
Ich habe gerade mal geschaut, ich glaube, ich habe da mal was am 1.mai gefixt. Installiere mal die aktuelle version 3.6

Mooo

@michaelf said in Test Adapter Mihome-vacuum v3.1.6 Next Generarition:

Hi,

ich hab ein Roborock s7 der Adapter funktioniert bis auf die Karte.

Diese wird einmal aktualisiert und dann hängt sich der ganze Adapter auf, Speicherkarte des Pi´s läuft voll.

Nach meiner Recherche geht wohl nur ein 64 bit System, ist das so ? oder habe ich noch irgendwas irgendwo falsch gemacht ???

Grüße

Selber Roborock, selbes Problem.
Nach dem zweiten mal voll laufen habe ich alles gesichert, formatiert und 64bit aufgesetzt.
Jetzt funktioniert die Karte wie sie soll.

Gruss

MichaelF

@mooo

Hi,

ist das wirklich die einzige Lösung was machen die anderen Adapter laufen die ohne Probleme auch mit dem 64 bit System ?

Grüße

Thomas Braun

@michaelf sagte in Test Adapter Mihome-vacuum v3.1.6 Next Generarition:

die anderen Adapter laufen die ohne Probleme auch mit dem 64 bit System ?

Die Adapter laufen in nodeJS als Laufzeitumgebung. Und da gibt es natürlich auch eine 64bit-Version.

echad@chet:/opt/iobroker $ apt policy nodejs
nodejs:
  Installed: 18.9.1-deb-1nodesource1
  Candidate: 18.9.1-deb-1nodesource1
  Version table:
 *** 18.9.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages

MichaelF

@thomas-braun

Wäre es möglich mit einem 2 pi 4 4gb ram ein multihost System aufzusetzen wo das 64bit System drauf läuft ?

Ich hätte noch ein pi übrig und wenn er den jetzigen auch noch entlastet wäre es ja auf kein Fall schlechter.

Grüsse

Thomas Braun

@michaelf

Möglich ist alles.

Damrak2022

@bahnuhr verschoben

bahnuhr

@damrak2022 sagte in Test Adapter Mihome-vacuum v3.1.6 Next Generarition:

@bahnuhr verschoben

?????

Community Forum

NEWS

Test Adapter Mihome-vacuum v3.1.6 Next Generarition

Support us

410

32.5k

81.7k

1.3m