[gelöst] Fehler mit HMIP Adapter

GregorS

Ich bekomme immer wieder diese Fehlermeldungen und der hm-rpc wird beendet.
Nach einem Neustart der HM läuft es wieder für eine Zeit.

Einstellungen habe ich nicht verändert.

hm-rpc.1
	2022-03-19 15:58:34.497	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1
	2022-03-19 15:57:53.535	error	Ping error [TinkerboardS:hm-rpc.1:4922f854741899559ac6a004cdeeb06d]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1
	2022-03-19 15:57:24.862	error	Ping error [TinkerboardS:hm-rpc.1:4922f854741899559ac6a004cdeeb06d]: Unknown XML-RPC tag 'TITLE'

Ich hoffe, jemand hat eine gute Idee.
Bisher lief die HM einwandfrei.

Meister Mopper

@gregors sagte in Fehler mit HMIP Adapter:

Init not possible, going to stop: Unknown XML-RPC tag

Wie sieht Dein System aus?

GregorS

@meister-mopper
Was meinst Du?
Ist ein Tinkerboard mit piVCCU3 und RPI-RF-MOD auf den GPIO´s.
Das System (Homeatic) habe ich nie wieder geändert.
Lief bis dato immer einwandfrei.
Hatte vor einiger Zeit ein defektes Netzteil mit Absturz des ioBrokers.
Aber das System hat nach 2-3 Anläufen wieder einwandrei gebootet.

Meister Mopper

@gregors Es gab hier schon mal dieses Problem.

Damals wurde in der CCU unter Einstellungen/Systemsteuerung/Sicherheit die Authentifizierung deaktiviert.

GregorS

@meister-mopper

Ist bei mir schon immer deaktiviert gewesen

wendy2702

@gregors Welche Adapter Version?

Kannst du das loggen mal auf Debug stellen, dann steht da möglicherweise mehr drin.

GregorS

@wendy2702
Werde ich machen, aber im Augenblick läuft wieder alles.
Habe die HM neu gestartet.
Denke aber, morgen habe ich wieder die Fehler.

GregorS

@wendy2702

Hier mal der aktuelle Debug:

hm-rpc.1
	2022-03-19 19:33:18.961	debug	hm-rpc.1.001F5A49940021.0.CARRIER_SENSE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "30" => "30"
hm-rpc.1
	2022-03-19 19:33:18.959	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","001F5A49940021:0","CARRIER_SENSE_LEVEL",30]
hm-rpc.1
	2022-03-19 19:33:12.756	debug	hm-rpc.1.000A9BE990CFC3.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.752	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","UNREACH",true]
hm-rpc.1
	2022-03-19 19:33:12.427	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.414	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.401	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.401	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.391	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.379	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.369	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.369	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.354	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.353	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.344	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.343	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.335	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.334	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.325	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.324	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.314	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.313	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.303	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.302	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.253	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.252	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.211	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.210	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.184	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.183	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.148	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.147	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.089	debug	hm-rpc.1.000A9BE990C35D.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.088	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","UNREACH",true]
hm-rpc.1
	2022-03-19 19:33:12.057	debug	hm-rpc.1.000A9BE990CFC3.0.RSSI_DEVICE ==> UNIT: "undefined" (min: -128, max: 127) From "-63" => "-63"
hm-rpc.1
	2022-03-19 19:33:12.056	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","RSSI_DEVICE",-63]
hm-rpc.1
	2022-03-19 19:33:12.054	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990CFC3:0,RSSI_DEVICE,-63
hm-rpc.1
	2022-03-19 19:33:12.053	debug	hm-rpc.1.000A9BE990CFC3.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "false" => "false"
hm-rpc.1
	2022-03-19 19:33:12.050	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","UNREACH",false]
hm-rpc.1
	2022-03-19 19:33:12.049	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990CFC3:0,UNREACH,false
hm-rpc.1
	2022-03-19 19:33:12.049	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.048	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.047	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990CFC3:0,CONFIG_PENDING,true
hm-rpc.1
	2022-03-19 19:33:11.642	debug	hm-rpc.1.000A9BE990C35D.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:11.641	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","UNREACH",true]
hm-rpc.1
	2022-03-19 19:33:10.984	debug	hm-rpc.1.000A9BE990C35D.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.971	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","UNREACH",true]
hm-rpc.1
	2022-03-19 19:33:10.509	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.508	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.501	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.500	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.491	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.491	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.479	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.478	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.466	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.465	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.450	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.449	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.435	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.434	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.421	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.420	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.393	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.392	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.360	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.359	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.344	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.343	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.296	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.282	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.262	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.257	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.237	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.236	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.213	debug	hm-rpc.1.000A9BE990C35D.0.RSSI_DEVICE ==> UNIT: "undefined" (min: -128, max: 127) From "-71" => "-71"
hm-rpc.1
	2022-03-19 19:33:10.213	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","RSSI_DEVICE",-71]
hm-rpc.1
	2022-03-19 19:33:10.212	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990C35D:0,RSSI_DEVICE,-71
hm-rpc.1
	2022-03-19 19:33:10.211	debug	hm-rpc.1.000A9BE990C35D.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "false" => "false"
hm-rpc.1
	2022-03-19 19:33:10.210	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","UNREACH",false]
hm-rpc.1
	2022-03-19 19:33:10.210	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990C35D:0,UNREACH,false
hm-rpc.1
	2022-03-19 19:33:10.209	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.202	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.198	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990C35D:0,CONFIG_PENDING,true
hm-rpc.1
	2022-03-19 19:33:04.824	debug	hm-rpc.1.001F5A49940021.0.CARRIER_SENSE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "40" => "40"
hm-rpc.1
	2022-03-19 19:33:04.822	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","001F5A49940021:0","CARRIER_SENSE_LEVEL",40]
hm-rpc.1
	2022-03-19 19:33:04.646	debug	hm-rpc.1.001F5A49940021.0.DUTY_CYCLE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "2.5" => "2.5"
hm-rpc.1
	2022-03-19 19:33:04.645	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","001F5A49940021:0","DUTY_CYCLE_LEVEL",2.5]
hm-rpc.1
	2022-03-19 19:33:03.957	debug	hm-rpc.1.001F5A49940021.0.CARRIER_SENSE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "40" => "40"
hm-rpc.1
	2022-03-19 19:33:03.956	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","001F5A49940021:0","CARRIER_SENSE_LEVEL",40]
hm-rpc.1
	2022-03-19 19:32:52.901	debug	xmlrpc <- event: hm-rpc.1.CENTRAL.0.PONG:TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0 discarded, no matching device
hm-rpc.1
	2022-03-19 19:32:52.900	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","CENTRAL:0","PONG","TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0"]
hm-rpc.1
	2022-03-19 19:32:52.851	debug	PING ok
hm-rpc.1
	2022-03-19 19:32:52.828	debug	Send PING...
hm-rpc.1
	2022-03-19 19:32:52.827	debug	[KEEPALIVE] Check if connection is alive
hm-rpc.1
	2022-03-19 19:32:38.069	info	Loglevel changed from "error" to "debug"

Hier gibt es auch keine Probleme mit dem XML-Tag.

GregorS

@wendy2702

Hier nun der Fehlerbericht nachdem der hm-rpc wieder abgeschmiert war.

host.TinkerboardS	2022-03-21 08:10:47.428	info	instance system.adapter.hm-rpc.1 started with pid 26845
host.TinkerboardS	2022-03-21 08:10:17.105	info	Restart adapter system.adapter.hm-rpc.1 because enabled
host.TinkerboardS	2022-03-21 08:10:17.103	info	instance system.adapter.hm-rpc.1 terminated with code 0 (NO_ERROR)
hm-rpc.1	2022-03-21 08:10:16.255	info	Terminated (NO_ERROR): Without reason
hm-rpc.1	2022-03-21 08:10:16.254	debug	Plugin sentry destroyed
hm-rpc.1	2022-03-21 08:10:16.251	info	terminating
hm-rpc.1	2022-03-21 08:10:15.940	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-21 08:10:15.245	info	xmlrpc -> 192.168.10.94:2010/ init ["http://192.168.10.95:2010",""]
hm-rpc.1	2022-03-21 08:10:05.906	debug	xmlrpc -> 192.168.10.94:2010/ init ["http://192.168.10.95:2010","TinkerboardS:hm-rpc.1:a7e25b72b50e29f420f7ed3738b27d29"]
hm-rpc.1	2022-03-21 08:09:45.242	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-21 08:09:40.941	info	Loglevel changed from "error" to "debug"

Mehr kommt nicht an Infos.

wendy2702

@gregors welche Adapter Version?

Was steht zu dem Zeitpunkt im CCU log und im Syslog?

Iobroker und PiVCCU läuft beides auf den tinkerboard?

GregorS

@wendy2702

Adapter HM-RPC 1.15.11
Beides läuft zusammen auf dem Tinkerboard.

Habe keine Daten zum passenden Termin.
Vor 08:20:54 habe ich keine Einträge im hmserver.log

Werde morgen mal schauen wenn er wieder Down ist und die Dateien sichern.
Syslog habe ich nicht

Homoran

@gregors sagte in Fehler mit HMIP Adapter:

Unknown XML-RPC tag 'TITLE'

such mal nach dem Fehler. Hat was mit Auth zu tun glaube ich.

oder war deine CCU zu dem Zeitpunkt neu gestartet?

wendy2702

@gregors sagte in [Fehler mit HMIP Adapter]

Syslog habe ich nicht

Jedes Linux System hat im Standard ein Syslog

GregorS

@wendy2702
Hier nun die Logeinträge zum entsprechenden Zeitpunkt:

ioBroker

hm-rpc.1	2022-03-22 13:13:39.607	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:13:10.961	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
host.TinkerboardS	2022-03-22 13:10:54.342	info	instance system.adapter.hm-rpc.1 started with pid 21751
host.TinkerboardS	2022-03-22 13:10:24.014	info	Restart adapter system.adapter.hm-rpc.1 because enabled
host.TinkerboardS	2022-03-22 13:10:24.012	info	instance system.adapter.hm-rpc.1 terminated with code 0 (NO_ERROR)
hm-rpc.1	2022-03-22 13:10:23.012	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:09:52.286	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
host.TinkerboardS	2022-03-22 13:05:07.568	info	instance system.adapter.hm-rpc.1 started with pid 8959
host.TinkerboardS	2022-03-22 13:04:37.307	info	Restart adapter system.adapter.hm-rpc.1 because enabled
host.TinkerboardS	2022-03-22 13:04:37.306	info	instance system.adapter.hm-rpc.1 terminated with code 0 (NO_ERROR)
hm-rpc.1	2022-03-22 13:04:34.816	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:04:05.448	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:04:04.097	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:03:35.430	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:03:04.717	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:02:33.989	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'

Tinkerboard CCU3

Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 de.eq3.cbcs.server.core.persistence.AbstractPersistency ERROR [vert.x-worker-thread-4] The config file of the device 3014F711A0000A9BE990C516 could not be read 
java.nio.file.FileSystemException: /etc/config/crRFD/data/3014F711A0000A9BE990C516.dev: Too many open files
	at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
	at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
	at java.nio.file.Files.newByteChannel(Files.java:361)
	at java.nio.file.Files.newByteChannel(Files.java:407)
	at java.nio.file.spi.FileSystemProvider.newInputStream(FileSystemProvider.java:384)
	at java.nio.file.Files.newInputStream(Files.java:152)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1723)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1696)
	at de.eq3.cbcs.server.core.persistence.AbstractPersistency.handleGetDevicePendingConfigurationCommand(AbstractPersistency.java:295)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handleDeviceSpecificCommand(KryoPersistenceWorker.java:432)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:309)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:89)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.vertx.core.impl.TaskQueue.lambda$new$0(TaskQueue.java:60)
	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
	at java.lang.Thread.run(Thread.java:748)
Mar 22 13:01:32 de.eq3.cbcs.server.core.persistence.AbstractPersistency ERROR [vert.x-worker-thread-4] The config file of the device 3014F711A0000A9BE990C516 could not be read 
java.nio.file.FileSystemException: /etc/config/crRFD/data/3014F711A0000A9BE990C516.dev: Too many open files
	at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
	at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
	at java.nio.file.Files.newByteChannel(Files.java:361)
	at java.nio.file.Files.newByteChannel(Files.java:407)
	at java.nio.file.spi.FileSystemProvider.newInputStream(FileSystemProvider.java:384)
	at java.nio.file.Files.newInputStream(Files.java:152)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1723)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1696)
	at de.eq3.cbcs.server.core.persistence.AbstractPersistency.handleGetDevicePendingConfigurationCommand(AbstractPersistency.java:295)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handleDeviceSpecificCommand(KryoPersistenceWorker.java:432)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:309)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:89)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.vertx.core.impl.TaskQueue.lambda$new$0(TaskQueue.java:60)
	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
	at java.lang.Thread.run(Thread.java:748)
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 de.eq3.cbcs.server.core.persistence.AbstractPersistency ERROR [vert.x-worker-thread-4] The config file of the device 3014F711A0000A9BE990C516 could not be read 
java.nio.file.FileSystemException: /etc/config/crRFD/data/3014F711A0000A9BE990C516.dev: Too many open files
	at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
	at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
	at java.nio.file.Files.newByteChannel(Files.java:361)
	at java.nio.file.Files.newByteChannel(Files.java:407)
	at java.nio.file.spi.FileSystemProvider.newInputStream(FileSystemProvider.java:384)
	at java.nio.file.Files.newInputStream(Files.java:152)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1723)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1696)
	at de.eq3.cbcs.server.core.persistence.AbstractPersistency.handleGetDevicePendingConfigurationCommand(AbstractPersistency.java:295)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handleDeviceSpecificCommand(KryoPersistenceWorker.java:432)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:309)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:89)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.vertx.core.impl.TaskQueue.lambda$new$0(TaskQueue.java:60)
	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
	at java.lang.Thread.run(Thread.java:748)

Syslog

Mar 22 13:00:01 localhost CRON[29949]: (root) CMD (/usr/lib/armbian/armbian-truncate-logs)
Mar 22 13:05:01 localhost CRON[8841]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Mar 22 13:15:01 localhost CRON[30745]: (root) CMD (/usr/lib/armbian/armbian-truncate-logs)
Mar 22 13:15:01 localhost CRON[30751]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)

Was halt verwunderlich ist, dass es zig Stunden läuft und danach nicht mehr.

wendy2702

@gregors sagte in Fehler mit HMIP Adapter:

Too many open files

Naja,

wenn du neu startest sind vermutlich alle Files wieder closed.

Ich habe aber gerade keine Idee welche(s) file(s) da open sind.

Vielleicht hat @foxriver76 eine Idee.

foxriver76

Wenn die Fehlermeldung kommt, heißt das, dass er da eine HTML Seite zurück bekommt. Die einfach mal unter IP + Port aufrufen und schauen was da steht.

GregorS

@foxriver76

Wie mache ich das genau, im Browser?
Welchen Port muss ich angeben?

foxriver76

@gregors Ip der CCU:Port (der den du auch im Adapter angegeben hast, normal)

GregorS

@foxriver76
Habe die Seite aufgerufen.
Dies ist das Ergebnis:

Die HM WebUI meldet sich sofort, während diese Abfrage gut 5 Minuten gedauert hat.

GregorS

@gregors

Hier noch der Quelltext:

<!DOCTYPE html>
<html lang="de">
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <title>HomeMatic</title>

    <style rel="stylesheet" type="text/css">

      .Invisible {
        display: none;
      }

    </style>
      <script type="text/javascript" src="/webui/js/extern/jquery.js?_version_=2.0pre1"></script>
      <script type="text/javascript" src="/webui/js/extern/jqueryURLPlugin.js?_version_=2.0pre1"></script>
      <script type="text/javascript" src="/webui/js/lang/loadTextResource.js"></script>
      <script type="text/javascript" src="/webui/js/lang/translate.js"></script>
    <script type="text/javascript">

      CHECK_INTERVAL = 3000;  // Intervall, in dem geprüft wird, ob der ReGa Webserver aktiv ist

      /**
       * Erzeugt eine Instanz des XMLHttpRequest-Objekts
       */
      createXMLHttpRequest = function()
      {
        var xmlHttp = null;

        if ( window.XMLHttpRequest )
        {
          xmlHttp = new XMLHttpRequest();
        }
        else if ( window.ActiveXObject )
        {
          try
          {
            xmlHttp = new ActiveXObject("Msxml2.XMLHTTP");
          }
          catch (ex)
          {
            try
            {
              xmlHttp = new ActiveXObject("Microsoft.XMLHTTP");
            }
            catch (ex)
            {
              // leer
            }
          }
        }

        return xmlHttp;
      };

      /**
       * Prüft zyklsich, ob der ReGa Webserver verfügbar ist.
       */
      check = function()
      {
        var request = createXMLHttpRequest();

        if (request)
        {
          request.open("GET", "/ise/checkrega.cgi", false); // synchrone Anfrage
          request.send(null);

          if ("OK" == request.responseText)
          {
            window.setTimeout("window.location.href='/index.htm'", 1000);
          }
          else
          {
            window.setTimeout("check();", CHECK_INTERVAL);
          }
        }
      };

      /**
       * Wird beim Laden der Seite aufgerufen.
       **/
      startup = function()
      {
        var content = document.getElementById("content");
        content.className = "";

        check();
      };

    </script>
  </head>
  <body style="background-color: #183473;color: #FFFFFF;" onload="startup();">

    <div id="content" class="Invisible">
      <div id="content_" align="center" >
        <h1>${ccuNotReady}</h1>
        <p>${ccuNotReadyHint}</p>
      </div>
      <div align="center" style="padding-top:250px;">
        <img id="imgLogo" src="/ise/img/hm-logo.png" alt=""/>
      </div>
    </div>

    <script type="text/javascript">
        translatePage();
    </script>

    <noscript>
      <div align="center">
        <!-- <p>Um die HomeMatic WebUI nutzen zu k&ouml;nnen, muss JavaScript in Ihrem Browser aktiviert sein.</p> -->
          <p>Please activate JavaScript in your browser</p>
      </div>
    </noscript>

  </body>
</html>

NEWS

[gelöst] Fehler mit HMIP Adapter

Support us

818
Online

32.1k
Users

80.7k
Topics

1.3m
Posts

NEWS

[gelöst] Fehler mit HMIP Adapter

Support us

818Online

32.1kUsers

80.7kTopics

1.3mPosts

818
Online

32.1k
Users

80.7k
Topics

1.3m
Posts