Neues YouTube-Video: Visualisierung im Devices-Adapter

[Meister Mopper]

@gregors sagte in Fehler mit HMIP Adapter:

Init not possible, going to stop: Unknown XML-RPC tag

Wie sieht Dein System aus?

[GregorS]

@meister-mopper
Was meinst Du?
Ist ein Tinkerboard mit piVCCU3 und RPI-RF-MOD auf den GPIO´s.
Das System (Homeatic) habe ich nie wieder geändert.
Lief bis dato immer einwandfrei.
Hatte vor einiger Zeit ein defektes Netzteil mit Absturz des ioBrokers.
Aber das System hat nach 2-3 Anläufen wieder einwandrei gebootet.

[Meister Mopper]

@gregors Es gab hier schon mal dieses Problem.

Damals wurde in der CCU unter Einstellungen/Systemsteuerung/Sicherheit die Authentifizierung deaktiviert.

[GregorS]

@meister-mopper

Ist bei mir schon immer deaktiviert gewesen

[wendy2702]

@gregors Welche Adapter Version?

Kannst du das loggen mal auf Debug stellen, dann steht da möglicherweise mehr drin.

[GregorS]

@wendy2702
Werde ich machen, aber im Augenblick läuft wieder alles.
Habe die HM neu gestartet.
Denke aber, morgen habe ich wieder die Fehler.

[GregorS]

@wendy2702

Hier mal der aktuelle Debug:

hm-rpc.1
	2022-03-19 19:33:18.961	debug	hm-rpc.1.001F5A49940021.0.CARRIER_SENSE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "30" => "30"
hm-rpc.1
	2022-03-19 19:33:18.959	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","001F5A49940021:0","CARRIER_SENSE_LEVEL",30]
hm-rpc.1
	2022-03-19 19:33:12.756	debug	hm-rpc.1.000A9BE990CFC3.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.752	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","UNREACH",true]
hm-rpc.1
	2022-03-19 19:33:12.427	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.414	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.401	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.401	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.391	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.379	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.369	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.369	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.354	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.353	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.344	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.343	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.335	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.334	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.325	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.324	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.314	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.313	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.303	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.302	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.253	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.252	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.211	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.210	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.184	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.183	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.148	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.147	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.089	debug	hm-rpc.1.000A9BE990C35D.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.088	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","UNREACH",true]
hm-rpc.1
	2022-03-19 19:33:12.057	debug	hm-rpc.1.000A9BE990CFC3.0.RSSI_DEVICE ==> UNIT: "undefined" (min: -128, max: 127) From "-63" => "-63"
hm-rpc.1
	2022-03-19 19:33:12.056	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","RSSI_DEVICE",-63]
hm-rpc.1
	2022-03-19 19:33:12.054	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990CFC3:0,RSSI_DEVICE,-63
hm-rpc.1
	2022-03-19 19:33:12.053	debug	hm-rpc.1.000A9BE990CFC3.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "false" => "false"
hm-rpc.1
	2022-03-19 19:33:12.050	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","UNREACH",false]
hm-rpc.1
	2022-03-19 19:33:12.049	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990CFC3:0,UNREACH,false
hm-rpc.1
	2022-03-19 19:33:12.049	debug	hm-rpc.1.000A9BE990CFC3.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:12.048	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990CFC3:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:12.047	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990CFC3:0,CONFIG_PENDING,true
hm-rpc.1
	2022-03-19 19:33:11.642	debug	hm-rpc.1.000A9BE990C35D.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:11.641	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","UNREACH",true]
hm-rpc.1
	2022-03-19 19:33:10.984	debug	hm-rpc.1.000A9BE990C35D.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.971	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","UNREACH",true]
hm-rpc.1
	2022-03-19 19:33:10.509	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.508	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.501	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.500	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.491	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.491	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.479	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.478	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.466	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.465	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.450	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.449	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.435	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.434	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.421	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.420	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.393	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.392	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.360	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.359	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.344	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.343	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.296	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.282	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.262	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.257	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.237	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.236	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.213	debug	hm-rpc.1.000A9BE990C35D.0.RSSI_DEVICE ==> UNIT: "undefined" (min: -128, max: 127) From "-71" => "-71"
hm-rpc.1
	2022-03-19 19:33:10.213	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","RSSI_DEVICE",-71]
hm-rpc.1
	2022-03-19 19:33:10.212	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990C35D:0,RSSI_DEVICE,-71
hm-rpc.1
	2022-03-19 19:33:10.211	debug	hm-rpc.1.000A9BE990C35D.0.UNREACH ==> UNIT: "undefined" (min: undefined, max: undefined) From "false" => "false"
hm-rpc.1
	2022-03-19 19:33:10.210	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","UNREACH",false]
hm-rpc.1
	2022-03-19 19:33:10.210	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990C35D:0,UNREACH,false
hm-rpc.1
	2022-03-19 19:33:10.209	debug	hm-rpc.1.000A9BE990C35D.0.CONFIG_PENDING ==> UNIT: "undefined" (min: undefined, max: undefined) From "true" => "true"
hm-rpc.1
	2022-03-19 19:33:10.202	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","000A9BE990C35D:0","CONFIG_PENDING",true]
hm-rpc.1
	2022-03-19 19:33:10.198	debug	xml multicall <event>: TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0,000A9BE990C35D:0,CONFIG_PENDING,true
hm-rpc.1
	2022-03-19 19:33:04.824	debug	hm-rpc.1.001F5A49940021.0.CARRIER_SENSE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "40" => "40"
hm-rpc.1
	2022-03-19 19:33:04.822	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","001F5A49940021:0","CARRIER_SENSE_LEVEL",40]
hm-rpc.1
	2022-03-19 19:33:04.646	debug	hm-rpc.1.001F5A49940021.0.DUTY_CYCLE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "2.5" => "2.5"
hm-rpc.1
	2022-03-19 19:33:04.645	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","001F5A49940021:0","DUTY_CYCLE_LEVEL",2.5]
hm-rpc.1
	2022-03-19 19:33:03.957	debug	hm-rpc.1.001F5A49940021.0.CARRIER_SENSE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "40" => "40"
hm-rpc.1
	2022-03-19 19:33:03.956	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","001F5A49940021:0","CARRIER_SENSE_LEVEL",40]
hm-rpc.1
	2022-03-19 19:32:52.901	debug	xmlrpc <- event: hm-rpc.1.CENTRAL.0.PONG:TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0 discarded, no matching device
hm-rpc.1
	2022-03-19 19:32:52.900	debug	xmlrpc <- event ["TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0","CENTRAL:0","PONG","TinkerboardS:hm-rpc.1:ba680bd58c67f291c17ab3d927898aa0"]
hm-rpc.1
	2022-03-19 19:32:52.851	debug	PING ok
hm-rpc.1
	2022-03-19 19:32:52.828	debug	Send PING...
hm-rpc.1
	2022-03-19 19:32:52.827	debug	[KEEPALIVE] Check if connection is alive
hm-rpc.1
	2022-03-19 19:32:38.069	info	Loglevel changed from "error" to "debug"

Hier gibt es auch keine Probleme mit dem XML-Tag.

[GregorS]

@wendy2702

Hier nun der Fehlerbericht nachdem der hm-rpc wieder abgeschmiert war.

host.TinkerboardS	2022-03-21 08:10:47.428	info	instance system.adapter.hm-rpc.1 started with pid 26845
host.TinkerboardS	2022-03-21 08:10:17.105	info	Restart adapter system.adapter.hm-rpc.1 because enabled
host.TinkerboardS	2022-03-21 08:10:17.103	info	instance system.adapter.hm-rpc.1 terminated with code 0 (NO_ERROR)
hm-rpc.1	2022-03-21 08:10:16.255	info	Terminated (NO_ERROR): Without reason
hm-rpc.1	2022-03-21 08:10:16.254	debug	Plugin sentry destroyed
hm-rpc.1	2022-03-21 08:10:16.251	info	terminating
hm-rpc.1	2022-03-21 08:10:15.940	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-21 08:10:15.245	info	xmlrpc -> 192.168.10.94:2010/ init ["http://192.168.10.95:2010",""]
hm-rpc.1	2022-03-21 08:10:05.906	debug	xmlrpc -> 192.168.10.94:2010/ init ["http://192.168.10.95:2010","TinkerboardS:hm-rpc.1:a7e25b72b50e29f420f7ed3738b27d29"]
hm-rpc.1	2022-03-21 08:09:45.242	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-21 08:09:40.941	info	Loglevel changed from "error" to "debug"

Mehr kommt nicht an Infos.

[wendy2702]

@gregors welche Adapter Version?

Was steht zu dem Zeitpunkt im CCU log und im Syslog?

Iobroker und PiVCCU läuft beides auf den tinkerboard?

[GregorS]

@wendy2702

Adapter HM-RPC 1.15.11
Beides läuft zusammen auf dem Tinkerboard.

Habe keine Daten zum passenden Termin.
Vor 08:20:54 habe ich keine Einträge im hmserver.log

Werde morgen mal schauen wenn er wieder Down ist und die Dateien sichern.
Syslog habe ich nicht

[Homoran]

@gregors sagte in Fehler mit HMIP Adapter:

Unknown XML-RPC tag 'TITLE'

such mal nach dem Fehler. Hat was mit Auth zu tun glaube ich.

oder war deine CCU zu dem Zeitpunkt neu gestartet?

[wendy2702]

@gregors sagte in [Fehler mit HMIP Adapter]

Syslog habe ich nicht

Jedes Linux System hat im Standard ein Syslog

[GregorS]

@wendy2702
Hier nun die Logeinträge zum entsprechenden Zeitpunkt:

ioBroker

hm-rpc.1	2022-03-22 13:13:39.607	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:13:10.961	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
host.TinkerboardS	2022-03-22 13:10:54.342	info	instance system.adapter.hm-rpc.1 started with pid 21751
host.TinkerboardS	2022-03-22 13:10:24.014	info	Restart adapter system.adapter.hm-rpc.1 because enabled
host.TinkerboardS	2022-03-22 13:10:24.012	info	instance system.adapter.hm-rpc.1 terminated with code 0 (NO_ERROR)
hm-rpc.1	2022-03-22 13:10:23.012	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:09:52.286	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
host.TinkerboardS	2022-03-22 13:05:07.568	info	instance system.adapter.hm-rpc.1 started with pid 8959
host.TinkerboardS	2022-03-22 13:04:37.307	info	Restart adapter system.adapter.hm-rpc.1 because enabled
host.TinkerboardS	2022-03-22 13:04:37.306	info	instance system.adapter.hm-rpc.1 terminated with code 0 (NO_ERROR)
hm-rpc.1	2022-03-22 13:04:34.816	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:04:05.448	error	Init not possible, going to stop: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:04:04.097	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:03:35.430	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:03:04.717	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'
hm-rpc.1	2022-03-22 13:02:33.989	error	Ping error [TinkerboardS:hm-rpc.1:51dcc5ed69e2a2a1112f1fb8201bf1a2]: Unknown XML-RPC tag 'TITLE'

Tinkerboard CCU3

Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 de.eq3.cbcs.server.core.persistence.AbstractPersistency ERROR [vert.x-worker-thread-4] The config file of the device 3014F711A0000A9BE990C516 could not be read 
java.nio.file.FileSystemException: /etc/config/crRFD/data/3014F711A0000A9BE990C516.dev: Too many open files
	at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
	at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
	at java.nio.file.Files.newByteChannel(Files.java:361)
	at java.nio.file.Files.newByteChannel(Files.java:407)
	at java.nio.file.spi.FileSystemProvider.newInputStream(FileSystemProvider.java:384)
	at java.nio.file.Files.newInputStream(Files.java:152)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1723)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1696)
	at de.eq3.cbcs.server.core.persistence.AbstractPersistency.handleGetDevicePendingConfigurationCommand(AbstractPersistency.java:295)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handleDeviceSpecificCommand(KryoPersistenceWorker.java:432)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:309)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:89)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.vertx.core.impl.TaskQueue.lambda$new$0(TaskQueue.java:60)
	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
	at java.lang.Thread.run(Thread.java:748)
Mar 22 13:01:32 de.eq3.cbcs.server.core.persistence.AbstractPersistency ERROR [vert.x-worker-thread-4] The config file of the device 3014F711A0000A9BE990C516 could not be read 
java.nio.file.FileSystemException: /etc/config/crRFD/data/3014F711A0000A9BE990C516.dev: Too many open files
	at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
	at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
	at java.nio.file.Files.newByteChannel(Files.java:361)
	at java.nio.file.Files.newByteChannel(Files.java:407)
	at java.nio.file.spi.FileSystemProvider.newInputStream(FileSystemProvider.java:384)
	at java.nio.file.Files.newInputStream(Files.java:152)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1723)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1696)
	at de.eq3.cbcs.server.core.persistence.AbstractPersistency.handleGetDevicePendingConfigurationCommand(AbstractPersistency.java:295)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handleDeviceSpecificCommand(KryoPersistenceWorker.java:432)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:309)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:89)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.vertx.core.impl.TaskQueue.lambda$new$0(TaskQueue.java:60)
	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
	at java.lang.Thread.run(Thread.java:748)
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] I/O exception (java.net.SocketException) caught when connecting to {}->http://192.168.10.95:2010: Too many open files 
Mar 22 13:01:32 org.apache.http.impl.client.DefaultHttpClient INFO  [TinkerboardS:hm-rpc.1:c7416048ecb12d8a5c8edb34030a96c9_WorkerPool-1] Retrying connect to {}->http://192.168.10.95:2010 
Mar 22 13:01:32 de.eq3.cbcs.server.core.persistence.AbstractPersistency ERROR [vert.x-worker-thread-4] The config file of the device 3014F711A0000A9BE990C516 could not be read 
java.nio.file.FileSystemException: /etc/config/crRFD/data/3014F711A0000A9BE990C516.dev: Too many open files
	at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
	at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
	at java.nio.file.Files.newByteChannel(Files.java:361)
	at java.nio.file.Files.newByteChannel(Files.java:407)
	at java.nio.file.spi.FileSystemProvider.newInputStream(FileSystemProvider.java:384)
	at java.nio.file.Files.newInputStream(Files.java:152)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1723)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.loadSpecificDevice(KryoPersistenceWorker.java:1696)
	at de.eq3.cbcs.server.core.persistence.AbstractPersistency.handleGetDevicePendingConfigurationCommand(AbstractPersistency.java:295)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handleDeviceSpecificCommand(KryoPersistenceWorker.java:432)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:309)
	at de.eq3.cbcs.persistence.kryo.KryoPersistenceWorker.handle(KryoPersistenceWorker.java:89)
	at io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
	at io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
	at io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.vertx.core.impl.TaskQueue.lambda$new$0(TaskQueue.java:60)
	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
	at java.lang.Thread.run(Thread.java:748)

Syslog

Mar 22 13:00:01 localhost CRON[29949]: (root) CMD (/usr/lib/armbian/armbian-truncate-logs)
Mar 22 13:05:01 localhost CRON[8841]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Mar 22 13:15:01 localhost CRON[30745]: (root) CMD (/usr/lib/armbian/armbian-truncate-logs)
Mar 22 13:15:01 localhost CRON[30751]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)

Was halt verwunderlich ist, dass es zig Stunden läuft und danach nicht mehr.

[wendy2702]

@gregors sagte in Fehler mit HMIP Adapter:

Too many open files

Naja,

wenn du neu startest sind vermutlich alle Files wieder closed.

Ich habe aber gerade keine Idee welche(s) file(s) da open sind.

Vielleicht hat @foxriver76 eine Idee.

[foxriver76]

Wenn die Fehlermeldung kommt, heißt das, dass er da eine HTML Seite zurück bekommt. Die einfach mal unter IP + Port aufrufen und schauen was da steht.

[GregorS]

@foxriver76

Wie mache ich das genau, im Browser?
Welchen Port muss ich angeben?

[foxriver76]

@gregors Ip der CCU:Port (der den du auch im Adapter angegeben hast, normal)

[GregorS]

@foxriver76
Habe die Seite aufgerufen.
Dies ist das Ergebnis:

Die HM WebUI meldet sich sofort, während diese Abfrage gut 5 Minuten gedauert hat.

[GregorS]

@gregors

Hier noch der Quelltext:

<!DOCTYPE html>
<html lang="de">
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <title>HomeMatic</title>

    <style rel="stylesheet" type="text/css">

      .Invisible {
        display: none;
      }

    </style>
      <script type="text/javascript" src="/webui/js/extern/jquery.js?_version_=2.0pre1"></script>
      <script type="text/javascript" src="/webui/js/extern/jqueryURLPlugin.js?_version_=2.0pre1"></script>
      <script type="text/javascript" src="/webui/js/lang/loadTextResource.js"></script>
      <script type="text/javascript" src="/webui/js/lang/translate.js"></script>
    <script type="text/javascript">

      CHECK_INTERVAL = 3000;  // Intervall, in dem geprüft wird, ob der ReGa Webserver aktiv ist

      /**
       * Erzeugt eine Instanz des XMLHttpRequest-Objekts
       */
      createXMLHttpRequest = function()
      {
        var xmlHttp = null;

        if ( window.XMLHttpRequest )
        {
          xmlHttp = new XMLHttpRequest();
        }
        else if ( window.ActiveXObject )
        {
          try
          {
            xmlHttp = new ActiveXObject("Msxml2.XMLHTTP");
          }
          catch (ex)
          {
            try
            {
              xmlHttp = new ActiveXObject("Microsoft.XMLHTTP");
            }
            catch (ex)
            {
              // leer
            }
          }
        }

        return xmlHttp;
      };

      /**
       * Prüft zyklsich, ob der ReGa Webserver verfügbar ist.
       */
      check = function()
      {
        var request = createXMLHttpRequest();

        if (request)
        {
          request.open("GET", "/ise/checkrega.cgi", false); // synchrone Anfrage
          request.send(null);

          if ("OK" == request.responseText)
          {
            window.setTimeout("window.location.href='/index.htm'", 1000);
          }
          else
          {
            window.setTimeout("check();", CHECK_INTERVAL);
          }
        }
      };

      /**
       * Wird beim Laden der Seite aufgerufen.
       **/
      startup = function()
      {
        var content = document.getElementById("content");
        content.className = "";

        check();
      };

    </script>
  </head>
  <body style="background-color: #183473;color: #FFFFFF;" onload="startup();">

    <div id="content" class="Invisible">
      <div id="content_" align="center" >
        <h1>${ccuNotReady}</h1>
        <p>${ccuNotReadyHint}</p>
      </div>
      <div align="center" style="padding-top:250px;">
        <img id="imgLogo" src="/ise/img/hm-logo.png" alt=""/>
      </div>
    </div>

    <script type="text/javascript">
        translatePage();
    </script>

    <noscript>
      <div align="center">
        <!-- <p>Um die HomeMatic WebUI nutzen zu k&ouml;nnen, muss JavaScript in Ihrem Browser aktiviert sein.</p> -->
          <p>Please activate JavaScript in your browser</p>
      </div>
    </noscript>

  </body>
</html>

[foxriver76]

@gregors Ist das CCU Marke Eigenbau also gebautes Funkmodul?

JA schreibst du oben. Check mal ob das Funkmodul richtig drauf ist, evtl. Wackelkontakt oder ähnliches. Das führt meist zu der Meldung, evtl. findest du auch was im Syslog der CCU, dass das Modul evtl. plötzlich verschwindet.

Bzw. wäre dann die Frage, kannst du noch Geräte mittels der CCU steuern, wenn der Adapter das Problem hat?