ZigBee neue Version 1.6.x
-
@asgothian & @arteck - Danke für eure schnelle Reaktion.
Ja, das mit dem Ignorieren der Karte habe ich ja meist auch so gemacht.
Dabei ist mir halt nur aufgefallen, dass Koppeln nicht mehr geht aber gut, dass ihr auch bestätigt, dass das die Netzwerkanzeige nicht wichtig ist.Wie kommt es denn zu der Änderung der PAN-ID? Die war vorher sicher auf 6754. Habe da auch einen Screenshot von.
Soft-Reset versuche ich sofort ...
.... beide Varianten ohne Erfolg versucht.
Der Soft-Reset bewirkt bei mir gar nichts. Nicht mal einen Neustart des Adapters.
Das Beenden des Adapters mit einem Trennen des Sticks hat zunächst ein Gerät in der Objektliste zum Vorschein gebracht, das scheinbar aus einem vorherigen Koppelversuch stammte. Ein Geist sozusagen, der aber nicht funktionierte. Habe dann im Zigbee-Adapter das Gerät gelöscht.
Koppeln neuer Geräte funktioniert aber weiterhin nicht!
Ich starte das Koppeln im Adapter, drücke lange den Knopf auf dem Sensor, drücke immer wieder kurz ....
Alle Varianten, nichts! -
@baron sagte in ZigBee neue Version 1.6.x:
Wie kommt es denn zu der Änderung der PAN-ID? Die war vorher sicher auf 6754. Habe da auch einen Screenshot von.
Genau erklären kann ich diesen Effekt nicht. Er wurde aber insbesondere bei den CC2538 Versionen häufiger beobachtet. Es ist denkbar das bei einem Neu aufsetzen des Adapters noch ein Gerät mit der alten Verschlüsselung aktiv war, so das bei dem Versuch ein neues Zigbee Netz aufzuspannen eine Kollision der Parameter festgestellt wurde. In diesem Fall gibt es inzwischen eine Fehlermeldung und der Adapter startet nicht. Ich gehe aktuell davon aus das statt dessen früher die Firmware einfach die Verschlüsselung angepasst hat.
A.
-
@asgothian Ich habe im Moment ein merkwürdiges Problem.
Mein cc1352p-2 läift seit 2 Jahren ohne größere Probleme (seit 2 Monaten mit der FW 20211217). Adapterversion ist 1.6.16.
Vor einigen Tagen wollte ich einen 3-fach Opple anlernen (habe schon einige ohne Probleme im Einsatz). Das anlernen klappt und ist unauffällig. Leider erscheint in der Geräteansicht keine Kachel und auch in der Netzwerkkarte sehe ich das Gerät nicht. Nach einem Adapterneustart ist eine Kachel mit "undefined" vorhanden. In den Geräten ist er ohne Namen drin.
Zum Testen habe ich einen Sonoff-ZBMini angelernt, der auch schon mehrfach drin ist. Hier genau das gleiche Verhalten. In den Geräten fehlt der Name, das Relais lässt sich schalten. Was könnte das sein?zigbee.0 2022-03-13 19:07:05.764 info (4692) Zigbee: stop joining zigbee.0 2022-03-13 19:06:22.003 info (4692) DeviceConfigure successful 0x804b50fffea6b2df 01MINIZB zigbee.0 2022-03-13 19:06:22.001 info (4692) Configuring 0x804b50fffea6b2df 01MINIZB zigbee.0 2022-03-13 19:06:22.000 info (4692) Device '0x804b50fffea6b2df' is supported, identified as: SONOFF Zigbee two way smart switch (ZBMINI) zigbee.0 2022-03-13 19:06:22.000 info (4692) Successfully interviewed '0x804b50fffea6b2df', device has succesfully been paired zigbee.0 2022-03-13 19:06:10.092 warn (4692) Device '0x804b50fffea6b2df' announced itself zigbee.0 2022-03-13 19:06:06.940 info (4692) Starting interview of '0x804b50fffea6b2df' zigbee.0 2022-03-13 19:06:04.419 info (4692) Zigbee: allowing new devices to join.
-
@docgame
Habe das gleiche Verhalten
CC2652P mit 20220219
Normale Gerätemodel:WXKG11LM
description:Aqara wireless switchmodel:SNZB-01
description:Wireless buttonWerden gepairt und funktionieren, werden aber als undefined angezeigt.
2022-03-13 22:17:20.416 - debug: zigbee.0 (4553) New device event: {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":2,"_type":"Router","_ieeeAddr":"0x84fd27fffe928394","_networkAddress":9397,"_manufacturerID":4098,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":256,"inputClusters":[0,3,4,5,6,4096],"outputClusters":[4096],"deviceNetworkAddress":9397,"deviceIeeeAddress":"0x84fd27fffe928394","clusters":{"genOnOff":{"attributes":{"onOff":0}},"genBasic":{"attributes":{"modelId":"01MINIZB","manufacturerName":"SONOFF","powerSource":0,"zclVersion":3,"dateCode":"20200927"}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]},{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":242,"profileID":41440,"deviceID":97,"inputClusters":[],"outputClusters":[33],"deviceNetworkAddress":9397,"deviceIeeeAddress":"0x84fd27fffe928394","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"SONOFF","_powerSource":"Mains (single phase)","_modelID":"01MINIZB","_zclVersion":3,"_dateCode":"20200927","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1647206175034,"_defaultSendRequestWhen":"immediate"},"mapped":{"exposes":[{"type":"switch","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","description":"On/off state of the switch","value_toggle":"TOGGLE"}]},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","on_time","off_wait_time"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]}],"zigbeeModel":["01MINIZB"],"model":"ZBMINI","vendor":"SONOFF","description":"Zigbee two way smart switch","options":[]},"name":"0x84fd27fffe928394"} 2022-03-13 22:17:20.416 - info: zigbee.0 (4553) 0x84fd27fffe928394 (addr 9397): ZBMINI - SONOFF Zigbee two way smart switch (Router) 2022-03-13 22:17:20.417 - debug: zigbee.0 (4553) New device event: {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d0006726d5a","_networkAddress":41373,"_manufacturerID":4151,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":259,"inputClusters":[0,18,3],"outputClusters":[0],"deviceNetworkAddress":41373,"deviceIeeeAddress":"0x00158d0006726d5a","clusters":{"genBasic":{"attributes":{"65281":{"1":3055,"3":34,"4":424,"5":25,"6":[0,1],"10":0},"modelId":"lumi.remote.b1acn01","appVersion":2,"manufacturerName":"LUMI","powerSource":3,"zclVersion":1,"stackVersion":2,"hwVersion":2,"dateCode":"20180525","swBuildId":"3000-0001"}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"LUMI","_powerSource":"Battery","_modelID":"lumi.remote.b1acn01","_applicationVersion":2,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":2,"_dateCode":"20180525","_softwareBuildID":"3000-0001","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{},"_lastSeen":1647206019640,"_defaultSendRequestWhen":"immediate"},"mapped":{"zigbeeModel":["lumi.sensor_switch.aq2","lumi.remote.b1acn01"],"model":"WXKG11LM","vendor":"Xiaomi","description":"Aqara wireless switch","meta":{"battery":{"voltageToPercentage":"3V_2850_3000_log"}},"exposes":[{"type":"numeric","name":"battery","property":"battery","access":1,"unit":"%","description":"Remaining battery in %","value_min":0,"value_max":100},{"type":"numeric","name":"voltage","property":"voltage","access":1,"unit":"mV","description":"Voltage of the battery in millivolts"},{"type":"enum","name":"action","property":"action","access":1,"values":["single","double","triple","quadruple","hold","release"],"description":"Triggered action (e.g. a button click)"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genMultistateInput","type":["attributeReport"]},{"cluster":"genOnOff","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"genOnOff","type":["attributeReport","readResponse"],"options":[{"type":"binary","name":"legacy","property":"legacy","access":2,"value_on":true,"value_off":false,"description":"Set to false to disable the legacy integration (highly recommended), will change structure of the published payload (default true)."}]},{"cluster":"genMultistateInput","type":["attributeReport","readResponse"],"options":[{"type":"binary","name":"legacy","property":"legacy","access":2,"value_on":true,"value_off":false,"description":"Set to false to disable the legacy integration (highly recommended), will change structure of the published payload (default true)."}]}],"toZigbee":[{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]}],"options":["[Circular]"]},"name":"0x00158d0006726d5a"} 2022-03-13 22:17:20.417 - info: zigbee.0 (4553) 0x00158d0006726d5a (addr 41373): WXKG11LM - Xiaomi Aqara wireless switch (EndDevice) 2022-03-13 22:17:20.418 - debug: zigbee.0 (4553) New device event: {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":4,"_type":"EndDevice","_ieeeAddr":"0x00124b00251d8bbc","_networkAddress":19490,"_manufacturerID":0,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":0,"inputClusters":[0,3,1],"outputClusters":[6,3],"deviceNetworkAddress":19490,"deviceIeeeAddress":"0x00124b00251d8bbc","clusters":{"genBasic":{"attributes":{"modelId":"WB01","manufacturerName":"eWeLink","powerSource":3,"zclVersion":0,"appVersion":5,"hwVersion":0,"dateCode":"20211103"}},"genPowerCfg":{"attributes":{"batteryVoltage":33,"batteryPercentageRemaining":200}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0024c1299f","endpointID":1},{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00124b0024c1299f","endpointID":1}],"_configuredReportings":[{"cluster":1,"attrId":32,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0},{"cluster":1,"attrId":33,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0}],"meta":{},"pendingRequests":[]}],"_manufacturerName":"eWeLink","_powerSource":"Battery","_modelID":"WB01","_applicationVersion":5,"_zclVersion":0,"_hardwareVersion":0,"_dateCode":"20211103","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":1796851078},"_lastSeen":1647206160444,"_defaultSendRequestWhen":"immediate"},"mapped":{"zigbeeModel":["WB01","WB-01"],"model":"SNZB-01","vendor":"SONOFF","whiteLabel":[{"vendor":"eWeLink","model":"RHK07"}],"description":"Wireless button","exposes":[{"type":"numeric","name":"battery","property":"battery","access":1,"unit":"%","description":"Remaining battery in %","value_min":0,"value_max":100},{"type":"enum","name":"action","property":"action","access":1,"values":["single","double","long"],"description":"Triggered action (e.g. a button click)"},{"type":"numeric","name":"voltage","property":"voltage","access":1,"unit":"mV","description":"Voltage of the battery in millivolts"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genOnOff","type":["commandOn","commandOff","commandToggle"]},{"cluster":"genPowerCfg","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]}],"options":[]},"name":"0x00124b00251d8bbc"} 2022-03-13 22:17:20.418 - info: zigbee.0 (4553) 0x00124b00251d8bbc (addr 19490): SNZB-01 - SONOFF Wireless button (EndDevice) 2022-03-13 22:17:20.418 - info: zigbee.0 (4553) Zigbee started 2022-03-13 22:17:20.424 - debug: zigbee.0 (4553) getGroups result: {} 2022-03-13 22:17:20.425 - debug: zigbee.0 (4553) DeviceAvailability:register device Ping for "0x84fd27fffe928394" 2022-03-13 22:17:20.427 - debug: zigbee.0 (4553) DeviceAvailability:register device Ping for "0x00158d0006726d5a" 2022-03-13 22:17:20.427 - debug: zigbee.0 (4553) DeviceAvailability:register device Ping for "0x00124b00251d8bbc" 2022-03-13 22:17:20.730 - debug: zigbee.0 (4553) handleMessage. {"type":"readResponse","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":2,"_type":"Router","_ieeeAddr":"0x84fd27fffe928394","_networkAddress":9397,"_manufacturerID":4098,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":256,"inputClusters":[0,3,4,5,6,4096],"outputClusters":[4096],"deviceNetworkAddress":9397,"deviceIeeeAddress":"0x84fd27fffe928394","clusters":{"genOnOff":{"attributes":{"onOff":0}},"genBasic":{"attributes":{"modelId":"01MINIZB","manufacturerName":"SONOFF","powerSource":0,"zclVersion":3,"dateCode":"20200927"}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]},{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":242,"profileID":41440,"deviceID":97,"inputClusters":[],"outputClusters":[33],"deviceNetworkAddress":9397,"deviceIeeeAddress":"0x84fd27fffe928394","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"SONOFF","_powerSource":"Mains (single phase)","_modelID":"01MINIZB","_zclVersion":3,"_dateCode":"20200927","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1647206240730,"_defaultSendRequestWhen":"immediate","_linkquality":51},"endpoint":"[Circular]","data":{"onOff":0},"linkquality":51,"groupID":0,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":2,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}} 2022-03-13 22:17:20.731 - debug: zigbee.0 (4553) Received Zigbee message from '0x84fd27fffe928394', type 'readResponse', cluster 'genOnOff', data '{"onOff":0}' from endpoint 1 with groupID 0 2022-03-13 22:17:20.732 - debug: zigbee.0 (4553) Type readResponse device {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":2,"_type":"Router","_ieeeAddr":"0x84fd27fffe928394","_networkAddress":9397,"_manufacturerID":4098,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":256,"inputClusters":[0,3,4,5,6,4096],"outputClusters":[4096],"deviceNetworkAddress":9397,"deviceIeeeAddress":"0x84fd27fffe928394","clusters":{"genOnOff":{"attributes":{"onOff":0}},"genBasic":{"attributes":{"modelId":"01MINIZB","manufacturerName":"SONOFF","powerSource":0,"zclVersion":3,"dateCode":"20200927"}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]},{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":242,"profileID":41440,"deviceID":97,"inputClusters":[],"outputClusters":[33],"deviceNetworkAddress":9397,"deviceIeeeAddress":"0x84fd27fffe928394","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"SONOFF","_powerSource":"Mains (single phase)","_modelID":"01MINIZB","_zclVersion":3,"_dateCode":"20200927","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1647206240730,"_defaultSendRequestWhen":"immediate","_linkquality":51},"mapped":{"exposes":[{"type":"switch","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","description":"On/off state of the switch","value_toggle":"TOGGLE"}]},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","on_time","off_wait_time"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]}],"zigbeeModel":["01MINIZB"],"model":"ZBMINI","vendor":"SONOFF","description":"Zigbee two way smart switch","options":[]},"name":"0x84fd27fffe928394"} incoming event: {"type":"readResponse","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":2,"_type":"Router","_ieeeAddr":"0x84fd27fffe928394","_networkAddress":9397,"_manufacturerID":4098,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":256,"inputClusters":[0,3,4,5,6,4096],"outputClusters":[4096],"deviceNetworkAddress":9397,"deviceIeeeAddress":"0x84fd27fffe928394","clusters":{"genOnOff":{"attributes":{"onOff":0}},"genBasic":{"attributes":{"modelId":"01MINIZB","manufacturerName":"SONOFF","powerSource":0,"zclVersion":3,"dateCode":"20200927"}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]},{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":242,"profileID":41440,"deviceID":97,"inputClusters":[],"outputClusters":[33],"deviceNetworkAddress":9397,"deviceIeeeAddress":"0x84fd27fffe928394","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"SONOFF","_powerSource":"Mains (single phase)","_modelID":"01MINIZB","_zclVersion":3,"_dateCode":"20200927","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":1},"_lastSeen":1647206240730,"_defaultSendRequestWhen":"immediate","_linkquality":51},"endpoint":"[Circular]","data":{"onOff":0},"linkquality":51,"groupID":0,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":2,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}} -
@tombox Bitte den cache leeren und die Seite neu laden.
A.
-
@asgothian Auch nach Cache leeren und anderer Browser
-
@asgothian Hier das selbe wie bei @tombox . Egal ob Firefox, Edge, Chrome oder I-Explorer.
-
ich kannst nachstellen.. die definition der Geräe nach neuanlernen ist hops..
hmm...
ich habs... installiert mal vom GIT..
-
@arteck Leider immer noch das selbe.
Nach dem anlernen ist keine Kachel da.
Nach einem Adapterneustart ist die Kachel mit "undefined" da.
Der einzige unterschied der GIT-Version....ich habe jetzt in den Objekten 2 Verzeichnisse des Geräts. Das neue kann ich nicht öffnen (die Datenpunkte des alten kann ich nach wie vor schalten).
-
ok also
adapter stop
jetzt adapter neu von GIT holen
die 2 objekte die falsch angelegt sind löschen
adapter neu starten -
@arteck
Hat funktioniert
zigbee.0 gelöscht und dann neugestartet jetzt werden alle Geräte angezeigt -
@arteck Super....
Nachdem ich so vorgegangen bin hat es geklappt. Kachel ist ohne neuanlernen da und sieht gut aus.
Danke!! -
Guten Abend,
ich habe der Zeit ein Problem mit dem Aquara E1 Rollomotor. Das Gerät lässt sich zwar anlernen überträgt aber keine Werte, so dass alle Datenpunkte auf (NULL) verbleiben.
Wie könnte ich dieses Problem lösen?Information zum System:
Iobroker Version 3.3.22
Node.js v12.22.9
NPM 6.14.15Zigbee Adapter v1.6.16
Verwendeter Stick: conbee 2
-
@io-alex sagte in ZigBee neue Version 1.6.x:
Iobroker Version 3.3.22
Node.js v12.22.9
NPM 6.14.15Losgelöst vom konkreten Problem:
Halt das System auf Stand. -
@thomas-braun Wird gerade erledigt
-
Wie bekomme ich Min und Max Werte für Hue/Color/ColorTemp/Saturation bei den Lampen raus? Wenn man außerhalb des Bereichs ist stürzt die Zigbee Instanz sofort ab.
-
@typ1er sagte in ZigBee neue Version 1.6.x:
Wie bekomme ich Min und Max Werte für Hue/Color/ColorTemp/Saturation bei den Lampen raus? Wenn man außerhalb des Bereichs ist stürzt die Zigbee Instanz sofort ab.
bitte poste die Meldung die kommt wenn die Werte ausserhalb des Bereiches sind. Eigentlich sollte der Adapter das abfangen.
A.
-
Ich kann es nicht mehr nachvollziehen , habe das Log gelöscht, ich habe 2 Lampen über Node-Red in HomeKit eingebunden, beim Testen ist die Zigbee Instanz mehrfach abgestürzt. Ich hatte die Min/Max angaben in Verdacht, das ich hier außerhalb der Bereiche wahr. daher auch die Frage wie ich min/max ermitteln kann.
-
@typ1er Ganz einfach.. du musst die Dokumentation der Lampen lesen.
A.
-
@Asgothian gibst du mir noch einen Hinweis wo, habe vorher Deconz benutzt und hier sind andere Bereiche gültig gewesen.
Ich habe jetzt eine Philips LCT010 hier, die zum probieren angemeldet habe.
Die ColorTemp ist im Zigbee Adapter 200-9000
in Deconz hatte ich 150-500
