NEWS
Multihost
-
im docker geht kein iobroker stop
warte mal mit pkill -u iobroker ging das
japp -
Stimmt. Das wird da mit pkill irgendwie gestoppt. Ich fahre aber keine Containerschiffe durch die Gegend, kann ich nix weiter zu sagen.
-
keine besserung:
pi@iobroker-pi:~ $ iobroker multihost browse No Multihost server found. Make sure iobroker is running on the host where you enabled multihost discovery (and it is not this host)!
root@buanet-iobroker1:/opt/iobroker# iobroker restart iobroker controller daemon is not running Starting iobroker controller daemon... iobroker controller daemon started. PID: 1655 root@buanet-iobroker1:/opt/iobroker# iobroker multihost enable Multihost discovery server activated on this host. If iobroker is currently not running please start befeore trying to discover this host. Important: Multihost discovery works with UDP packets. Make sure they are routed correctly in your network. If you use Docker you also need to configure this correctly. Multihost discovery will be automatically deactivated after 15 minutes. If you want to activate it permanently use the --persist flag Discovery authentication activated. Enter secret phrase for connection: Repeat secret phrase for connection: Please check the binding of the configured file server to allow remote connections. Please restart ioBroker for the changes to take effect: "iobroker restart" Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: file on 0.0.0.0 States: file on 0.0.0.0
-
und restart ist auch gemacht
root@buanet-iobroker1:/opt/iobroker# iobroker restart iobroker controller daemon is not running Starting iobroker controller daemon... iobroker controller daemon started. PID: 1655 root@buanet-iobroker1:/opt/iobroker# iobroker multihost enable Multihost discovery server activated on this host. If iobroker is currently not running please start befeore trying to discover this host. Important: Multihost discovery works with UDP packets. Make sure they are routed correctly in your network. If you use Docker you also need to configure this correctly. Multihost discovery will be automatically deactivated after 15 minutes. If you want to activate it permanently use the --persist flag Discovery authentication activated. Enter secret phrase for connection: Repeat secret phrase for connection: Please check the binding of the configured file server to allow remote connections. Please restart ioBroker for the changes to take effect: "iobroker restart" Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: file on 0.0.0.0 States: file on 0.0.0.0
-
Ich mach das immer danach:
https://www.iobroker.net/#de/documentation/config/multihost.md
-
@thomas-braun sagte in Multihost:
Ich mach das immer danach:
https://www.iobroker.net/#de/documentation/config/multihost.md
aber ein dicker Container muss wahrscheinlich im Hafen freigegeben werden
-
@thomas-braun said in Multihost:
Ich mach das immer danach:
https://www.iobroker.net/#de/documentation/config/multihost.mdDas hatte ich ausprobiert, im Master wurde nichts angezeigt aber die Weboberfläche vom Slave war wie erwartet weg.
Sämtliche Befehle per Putty an iobroker wurden mit immer den gleichen Fehlermeldungen zur Port zu 9000 und 9001 beantwortet.@Homoran : im Doker läuft auf dem Master noch nicht viel, bin mir aber ziemlich sicher das Port 9000 und 9001 nicht benutzt werden und auch die Synology Firewall lässt durch. An was denkst du bei "muss wahrscheinlich im Hafen freigegeben werden" ?
-
@ostseeskipper sagte in Multihost:
muss wahrscheinlich im Hafen freigegeben werden
hast du schon erkannt.
Ich habe keine Ahnung von den Blechbüchsen.
Aber da müssen doch die Ports durchgereicht werden -
@homoran
Die Ports und wie sie durchgereicht werden kann man definieren.
Man muss jeden einzelnen definieren
Ich bin nun nicht er Kommandozeilen Kenner.
Gibts nen Aufruf wie das gegengerät quasi auf nem bestimmten Port anpingen kann? -
@thomas-braun und @Homoran
Habe die Herausforderung unter Docker auf der Synology nun wie folgt gelöst.
Mit Portainer ein Netzwerk(IP30) mit einer IP angelegt (aus dem Adresskreis des Slave falls mehrere Subnetze)
Den iobroker Container diese Netzwerk(IP30) und zusätzlich zum Bridge Netzwerk zugewiesen.
Danach nach Anleitung zum Einrichten Multihost verfahren.