NEWS
Wasserzähler - Version 2 - all-in-device
-
@moonsorrox also vom bild her haben wir exakt die gleiche hardware, habe ein modul grad meinem nachbar gegeben er wollte auch mal testen. aber bei dem welches ich noch hier habe hatte ich mit dem Factory auch keinen erfolg, du nimmst aber auch esp32 oder eine andere auswahl?
@wuschel
ja ich nehme ESP32, aber ich bekomme es nicht hin mit dem develop Modus, geht bei mir absolut nicht, aber ich gebe nicht auf probiere es nochmal.
Und vorher immer Ersae machen sonst gibt es Probleme -
@wuschel
ja ich nehme ESP32, aber ich bekomme es nicht hin mit dem develop Modus, geht bei mir absolut nicht, aber ich gebe nicht auf probiere es nochmal.
Und vorher immer Ersae machen sonst gibt es Probleme@moonsorrox ich nehme an du nimmst auch die 921600 Baudrate, also ich habe kein Erfolg. Auch mit der Factory nicht.
Du drückst den IO0 Button bevor du das usbkabel einsteckst oder wie gehst du vor, sry das ich nach solchen details frage aber so langsam aber sicher verzweifel ich hier. -
@moonsorrox ich nehme an du nimmst auch die 921600 Baudrate, also ich habe kein Erfolg. Auch mit der Factory nicht.
Du drückst den IO0 Button bevor du das usbkabel einsteckst oder wie gehst du vor, sry das ich nach solchen details frage aber so langsam aber sicher verzweifel ich hier.ja genau diese nehme ich, 921600 Baudrate, aber auch das spielt in dem Fall keine Rolle, die langsameren gehen eben nur langsam hatte ich auch schon probiert, funktioniert auch.
Hast du mal die 3 Firmware Dateien in den Ordner vom Flashtool gelegt, das habe ich nämlich getan eben als ich den develop Modus auspobiert habe.
Denn der hat eben bei mir auch funktioniert und wenn ich es richtig sehe hat die mittlere Datei (partitions.bin) einen anderen Wert gehabt beim übertragen.Nein bei meinem Modul siehe Bild oben brauche ich nichts drücken, dass Modul startet, dann gehe ich in das ESP32 Download Tool, gehe die 3 Dateien mit der Tab Taste durch damit ich links im schwarzen Fenster sehe das es OK ist, dann drücke ich ERASE, dann drücke ich den STOP Button, danach den START Button, der muss evtl. sogar zweimal gedrückt werden bei mir zumindest und dann flasht er mir das Modul.
Weiteres Problem:
Was bei mir jetzt aber der Fall ist, ich komme nicht mehr auf die Weboberfläche wenn ich das Modul aus dem PC nehme und an ein separates Netzteil stecke.Erledigt
wollte immer https://IP haben das ging nicht -
ja genau diese nehme ich, 921600 Baudrate, aber auch das spielt in dem Fall keine Rolle, die langsameren gehen eben nur langsam hatte ich auch schon probiert, funktioniert auch.
Hast du mal die 3 Firmware Dateien in den Ordner vom Flashtool gelegt, das habe ich nämlich getan eben als ich den develop Modus auspobiert habe.
Denn der hat eben bei mir auch funktioniert und wenn ich es richtig sehe hat die mittlere Datei (partitions.bin) einen anderen Wert gehabt beim übertragen.Nein bei meinem Modul siehe Bild oben brauche ich nichts drücken, dass Modul startet, dann gehe ich in das ESP32 Download Tool, gehe die 3 Dateien mit der Tab Taste durch damit ich links im schwarzen Fenster sehe das es OK ist, dann drücke ich ERASE, dann drücke ich den STOP Button, danach den START Button, der muss evtl. sogar zweimal gedrückt werden bei mir zumindest und dann flasht er mir das Modul.
Weiteres Problem:
Was bei mir jetzt aber der Fall ist, ich komme nicht mehr auf die Weboberfläche wenn ich das Modul aus dem PC nehme und an ein separates Netzteil stecke.Erledigt
wollte immer https://IP haben das ging nicht@moonsorrox ich habe jetzt eigentlich alles probiert, ich bekomme die software nicht zum laufen, dachte schon meine hardware sei defekt, habe aber gerade aus der arduino ide den ganzen chipsatz beschreiben können... versuche ich es mit aote kein Erfolg...
-
@moonsorrox ich habe jetzt eigentlich alles probiert, ich bekomme die software nicht zum laufen, dachte schon meine hardware sei defekt, habe aber gerade aus der arduino ide den ganzen chipsatz beschreiben können... versuche ich es mit aote kein Erfolg...
@wuschel
hast du die 3 Dateien mal in den Ordner vom Flashtool gelegt und die Pfade neu erstellt..? -
@wuschel
hast du die 3 Dateien mal in den Ordner vom Flashtool gelegt und die Pfade neu erstellt..?@moonsorrox habe es in das Vereichnis gelegt von der exe und in das verzeichnis bin jeweils die pfade angepasst.
kann die factory oder die dev version nehmen, bei allen kommt dieser dialogUploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
FLASH_CRYPT_CNT 0
ABS_DONE_0 False
Compressed 160552 bytes to 30961...
Compressed 160548 bytes to 30940...
Compressed 165816 bytes to 31975...is stub and send flash finish
im monitor:
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57aber am ende passiert nichts weiter, ich muss auch den IO0 drücken da ich sonst nicht auf den Chip komm, allerdings nur bei dem Downloadtool, flashe ich ne andere Software aus der Arduino IDE raus, muss ich ebenfalls nichts drücken.
Verstehe es ehrlich gesagt nicht...
-
@wuschel
hast du die 3 Dateien mal in den Ordner vom Flashtool gelegt und die Pfade neu erstellt..?@moonsorrox
Ich habe mittlerweile herausgefunden, wenn ich mit dem Finger ganz dolle auf die Kameraschnittstelle drücke funktioniert es ohne Probleme. Also bei mir scheint da die Hardware ein Problem zu haben ich habe sogar die v3 Version der Kamera und die läuft jetzt wenn man viel drückt. -
@moonsorrox
Ich habe mittlerweile herausgefunden, wenn ich mit dem Finger ganz dolle auf die Kameraschnittstelle drücke funktioniert es ohne Probleme. Also bei mir scheint da die Hardware ein Problem zu haben ich habe sogar die v3 Version der Kamera und die läuft jetzt wenn man viel drückt. -
@moonsorrox habe es in das Vereichnis gelegt von der exe und in das verzeichnis bin jeweils die pfade angepasst.
kann die factory oder die dev version nehmen, bei allen kommt dieser dialogUploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
FLASH_CRYPT_CNT 0
ABS_DONE_0 False
Compressed 160552 bytes to 30961...
Compressed 160548 bytes to 30940...
Compressed 165816 bytes to 31975...is stub and send flash finish
im monitor:
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57aber am ende passiert nichts weiter, ich muss auch den IO0 drücken da ich sonst nicht auf den Chip komm, allerdings nur bei dem Downloadtool, flashe ich ne andere Software aus der Arduino IDE raus, muss ich ebenfalls nichts drücken.
Verstehe es ehrlich gesagt nicht...
das hier gefällt mir nicht
flash read err, 1000evtl. kann jemand was dazu sagen sieht aus als hättest du einen Error
Hast du mal die SD Karte raus genommen und im log geschaut was drin steht
-
@joergh ja genau und die soll ja nicht funktionieren, macht es aber wenn ich fest auf den Klemmverschluss drücke
@samot Ok, danke. Ich habe nämlich gerade wieder drei von denen gekauft, weil ich nicht wusste, dass die nicht funktionieren sollen...die probiere ich dann mal bei Gelegenheit.
Ursprünglich hatte ich 4 Stück gekauft und die liefen auch nach anfänglichen Problemen mit dem flashen auch alle einwandfrei, habe dann aber beim entsiegeln einer Kamera diese beschädigt. Danach dachte ich bestelle ich einfach noch ein Komplettmodul, inkl. der USB Platine. Leider war das bisher eher frustrierend, denn keine der inzwischen drei Varianten lief richtig. Entweder ließen sie sich nicht flashen oder die Kameras liefen nicht. Dachte ich bin zu doof, aber sehe nun, dass es tatsächlich nicht an mir liegt.
-
@jomjol
Nach dem Update auf die Version 10 habe ich die folgende FM im Log:mqtt.1 2021-12-30 23:30:33.598 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:29:52"} mqtt.0 2021-12-30 23:30:13.607 error Client [wasser] Cannot parse {"value":288.5381,"raw":"00288.5381,"error":"no error","rate":0.001315,"timestamp":"2021-12-30T23:29:28"} mqtt.0 2021-12-30 23:29:19.660 error adapter disabled mqtt.1 2021-12-30 23:25:42.668 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:25:01"} mqtt.0 2021-12-30 23:25:22.845 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:24:37"} mqtt.1 2021-12-30 23:20:51.525 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:20:10"} mqtt.0 2021-12-30 23:20:31.659 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:19:46"} mqtt.1 2021-12-30 23:16:00.641 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:15:19"} mqtt.0 2021-12-30 23:15:40.509 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:14:55"} mqtt.1 2021-12-30 23:11:09.565 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:10:28"} mqtt.0 2021-12-30 23:10:49.537 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:10:04"} mqtt.1 2021-12-30 23:06:18.614 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:05:37"} mqtt.0 2021-12-30 23:05:58.453 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:05:13"} mqtt.1 2021-12-30 23:01:27.446 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:00:46"} mqtt.0 2021-12-30 23:01:07.510 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:00:22"} mqtt.1 2021-12-30 22:56:36.819 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.004027,"timestamp":"2021-12-30T22:55:55"} mqtt.0 2021-12-30 22:56:16.829 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:55:31"} mqtt.0 2021-12-30 22:56:16.803 warn State "mqtt.0.wasserzaehler.main.rate" has no existing object, this might lead to an error in future versions mqtt.1 2021-12-30 22:51:45.472 warn Cannot parse "gaszaehler/main/json": {"value":18008.72,"raw":"18008.72,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:51:04"} mqtt.0 2021-12-30 22:51:25.415 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:50:40"} mqtt.0 2021-12-30 22:51:25.392 warn State "mqtt.0.wasserzaehler.main.rate" has no existing object, this might lead to an error in future versions mqtt.1 2021-12-30 22:46:55.224 warn Cannot parse "gaszaehler/main/json": {"value":18008.72,"raw":"18008.72,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:46:13"} mqtt.0 2021-12-30 22:46:34.581 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:45:49"} mqtt.0 2021-12-30 22:46:34.559 warn State "mqtt.0.wasserzaehler.main.rate" has no existing object, this might lead to an error in future versions mqtt.1 2021-12-30 22:45:41.036 warn Cannot parse "gaszaehler/main/json": {"value":18008.72,"raw":"18008.72,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:44:58"} mqtt.1 2021-12-30 22:42:31.555 warn State "mqtt.1.gaszaehler.main.rate" has no existing object, this might lead to an error in future versions mqtt.0 2021-12-30 22:41:43.894 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:40:59"}Als Broker verwende ich im MQTT.0 noch den internen Server im IOBROKER und der.1 ist als Client an einem Mosqiutto Broker.
Debugger listening on ws://127.0.0.1:9229/d6003680-5783-40d2-b432-887a07aef4c3 For help, see: https://nodejs.org/en/docs/inspector 2021-12-31 00:07:37.860 - debug: mqtt.0 (796659) Redis Objects: Use Redis connection: 127.0.0.1:9001 2021-12-31 00:07:37.876 - debug: mqtt.0 (796659) Objects client ready ... initialize now 2021-12-31 00:07:37.876 - debug: mqtt.0 (796659) Objects create System PubSub Client 2021-12-31 00:07:37.877 - debug: mqtt.0 (796659) Objects create User PubSub Client 2021-12-31 00:07:37.877 - debug: mqtt.0 (796659) Objects client initialize lua scripts 2021-12-31 00:07:37.883 - debug: mqtt.0 (796659) Objects connected to redis: 127.0.0.1:9001 2021-12-31 00:07:37.886 - debug: mqtt.0 (796659) objectDB connected 2021-12-31 00:07:37.886 - debug: mqtt.0 (796659) Redis States: Use Redis connection: 127.0.0.1:9000 2021-12-31 00:07:37.890 - debug: mqtt.0 (796659) States create System PubSub Client 2021-12-31 00:07:37.890 - debug: mqtt.0 (796659) States create User PubSub Client 2021-12-31 00:07:37.894 - debug: mqtt.0 (796659) States connected to redis: 127.0.0.1:9000 2021-12-31 00:07:37.895 - debug: mqtt.0 (796659) statesDB connected 2021-12-31 00:07:38.015 - debug: mqtt.0 (796659) Plugin sentry Initialize Plugin (enabled=true) 2021-12-31 00:07:38.063 - error: mqtt.0 (796659) adapter disabled 2021-12-31 00:07:38.064 - info: mqtt.0 (796659) starting. Version 2.4.1 in /opt/iobroker/node_modules/iobroker.mqtt, node: v14.18.2, js-controller: 3.3.22 2021-12-31 00:07:38.143 - info: mqtt.0 (796659) Starting MQTT authenticated server on 0.0.0.0:1883 2021-12-31 00:07:38.143 - info: mqtt.0 (796659) Starting MQTT-WebSocket authenticated server on 0.0.0.0:1884 2021-12-31 00:07:38.192 - debug: mqtt.0 (796659) stateChange mqtt.0.info.connection: {"val":"","ack":true,"ts":1640905658191,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905658191} 2021-12-31 00:07:38.193 - debug: mqtt.0 (796659) onStateChange mqtt.0.info.connection: {"val":"","ack":true,"ts":1640905658191,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905658191} 2021-12-31 00:07:41.873 - info: mqtt.0 (796659) Client [wasser] connected with secret 1640905661865_7445 2021-12-31 00:07:41.906 - debug: mqtt.0 (796659) Client [wasser] with last will {"retain":true,"qos":0,"topic":"wasserzaehler/connection","payload":{"type":"Buffer","data":[99,111,110,110,101,99,116,105,111,110,32,108,111,115,116]}} 2021-12-31 00:07:41.906 - debug: mqtt.0 (796659) Client [wasser] with keepalive 60 set timeout to 90 seconds 2021-12-31 00:07:41.914 - debug: mqtt.0 (796659) stateChange mqtt.0.info.connection: {"val":"wasser","ack":true,"ts":1640905661913,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905661913} 2021-12-31 00:07:41.915 - debug: mqtt.0 (796659) onStateChange mqtt.0.info.connection: {"val":"wasser","ack":true,"ts":1640905661913,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905661913} 2021-12-31 00:07:42.910 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:08:12.919 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:08:43.008 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:09:13.209 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:09:38.843 - info: mqtt.0 (796659) Client [wasser] reconnected. Old secret 1640905661865_7445. New secret 1640905778840_6011 2021-12-31 00:09:38.845 - debug: mqtt.0 (796659) Client [wasser] with last will {"retain":true,"qos":0,"topic":"wasserzaehler/connection","payload":{"type":"Buffer","data":[99,111,110,110,101,99,116,105,111,110,32,108,111,115,116]}} 2021-12-31 00:09:38.846 - debug: mqtt.0 (796659) Client [wasser] with keepalive 60 set timeout to 90 seconds 2021-12-31 00:09:38.857 - debug: mqtt.0 (796659) stateChange mqtt.0.info.connection: {"val":"wasser","ack":true,"ts":1640905778852,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905661913} 2021-12-31 00:10:08.860 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:10:31.997 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.connection: {"val":"connected","ack":true,"ts":1640905831993,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640416562800} 2021-12-31 00:10:32.007 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.uptime: {"val":60,"ack":true,"ts":1640905832001,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905479400} 2021-12-31 00:10:32.016 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.freeMem: {"val":2987715,"ack":true,"ts":1640905832009,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832009} 2021-12-31 00:10:32.017 - debug: mqtt.0 (796659) onStateChange mqtt.0.wasserzaehler.freeMem: {"val":2987715,"ack":true,"ts":1640905832009,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832009} 2021-12-31 00:10:32.024 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.value: {"val":288.5381,"ack":true,"ts":1640905832018,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640903413572} 2021-12-31 00:10:32.032 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.error: {"val":"no error","ack":true,"ts":1640905832028,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640889028083} 2021-12-31 00:10:32.034 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.rate: {"val":0,"ack":true,"ts":1640905832029,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640903704690} 2021-12-31 00:10:32.045 - error: mqtt.0 (796659) Client [wasser] Cannot parse {"value":288.5381,"raw":"00288.5381,"error":"no error","rate":0.000000,"timestamp":"2021-12-31T00:09:47"} 2021-12-31 00:10:32.048 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.raw: {"val":"00288.5381","ack":true,"ts":1640905832046,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640903413590} 2021-12-31 00:10:32.050 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.timestamp: {"val":"2021-12-31T00:09:47","ack":true,"ts":1640905832048,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832048} 2021-12-31 00:10:32.050 - debug: mqtt.0 (796659) onStateChange mqtt.0.wasserzaehler.main.timestamp: {"val":"2021-12-31T00:09:47","ack":true,"ts":1640905832048,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832048} 2021-12-31 00:10:32.138 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.json: {"val":"{\"value\":288.5381,\"raw\":\"00288.5381,\"error\":\"no error\",\"rate\":0.000000,\"timestamp\":\"2021-12-31T00:09:47\"}","ack":true,"ts":1640905832134,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832134} 2021-12-31 00:10:32.139 - debug: mqtt.0 (796659) onStateChange mqtt.0.wasserzaehler.main.json: {"val":"{\"value\":288.5381,\"raw\":\"00288.5381,\"error\":\"no error\",\"rate\":0.000000,\"timestamp\":\"2021-12-31T00:09:47\"}","ack":true,"ts":1640905832134,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832134} Andreas@iobroker:~$ all ws gone! 2021-12-31 00:10:51.102 - debug: mqtt.0 (796659) Plugin sentry destroyed 2021-12-31 00:10:51.103 - info: mqtt.0 (796659) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reasonLaut Apollon77:
{"value":288.5381,"raw":"00288.5381,"error":"no error","rate":0.000000,"timestamp":"2021-12-31T00:09:47"}
Check the "raw" value ... is starts as a string, but there are mo double quotes afte rthe number and before error field.To be correct it wuld be needed to be that way:
{"value":288.5381,"raw":"00288.5381","error":"no error","rate":0.000000,"timestamp":"2021-12-31T00:09:47"}
-
@jomjol
Nach dem Update auf die Version 10 habe ich die folgende FM im Log:mqtt.1 2021-12-30 23:30:33.598 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:29:52"} mqtt.0 2021-12-30 23:30:13.607 error Client [wasser] Cannot parse {"value":288.5381,"raw":"00288.5381,"error":"no error","rate":0.001315,"timestamp":"2021-12-30T23:29:28"} mqtt.0 2021-12-30 23:29:19.660 error adapter disabled mqtt.1 2021-12-30 23:25:42.668 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:25:01"} mqtt.0 2021-12-30 23:25:22.845 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:24:37"} mqtt.1 2021-12-30 23:20:51.525 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:20:10"} mqtt.0 2021-12-30 23:20:31.659 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:19:46"} mqtt.1 2021-12-30 23:16:00.641 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:15:19"} mqtt.0 2021-12-30 23:15:40.509 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:14:55"} mqtt.1 2021-12-30 23:11:09.565 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:10:28"} mqtt.0 2021-12-30 23:10:49.537 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:10:04"} mqtt.1 2021-12-30 23:06:18.614 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:05:37"} mqtt.0 2021-12-30 23:05:58.453 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:05:13"} mqtt.1 2021-12-30 23:01:27.446 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:00:46"} mqtt.0 2021-12-30 23:01:07.510 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T23:00:22"} mqtt.1 2021-12-30 22:56:36.819 warn Cannot parse "gaszaehler/main/json": {"value":18008.74,"raw":"18008.74,"error":"no error","rate":0.004027,"timestamp":"2021-12-30T22:55:55"} mqtt.0 2021-12-30 22:56:16.829 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:55:31"} mqtt.0 2021-12-30 22:56:16.803 warn State "mqtt.0.wasserzaehler.main.rate" has no existing object, this might lead to an error in future versions mqtt.1 2021-12-30 22:51:45.472 warn Cannot parse "gaszaehler/main/json": {"value":18008.72,"raw":"18008.72,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:51:04"} mqtt.0 2021-12-30 22:51:25.415 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:50:40"} mqtt.0 2021-12-30 22:51:25.392 warn State "mqtt.0.wasserzaehler.main.rate" has no existing object, this might lead to an error in future versions mqtt.1 2021-12-30 22:46:55.224 warn Cannot parse "gaszaehler/main/json": {"value":18008.72,"raw":"18008.72,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:46:13"} mqtt.0 2021-12-30 22:46:34.581 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:45:49"} mqtt.0 2021-12-30 22:46:34.559 warn State "mqtt.0.wasserzaehler.main.rate" has no existing object, this might lead to an error in future versions mqtt.1 2021-12-30 22:45:41.036 warn Cannot parse "gaszaehler/main/json": {"value":18008.72,"raw":"18008.72,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:44:58"} mqtt.1 2021-12-30 22:42:31.555 warn State "mqtt.1.gaszaehler.main.rate" has no existing object, this might lead to an error in future versions mqtt.0 2021-12-30 22:41:43.894 error Client [wasser] Cannot parse {"value":288.5317,"raw":"00288.5317,"error":"no error","rate":0.000000,"timestamp":"2021-12-30T22:40:59"}Als Broker verwende ich im MQTT.0 noch den internen Server im IOBROKER und der.1 ist als Client an einem Mosqiutto Broker.
Debugger listening on ws://127.0.0.1:9229/d6003680-5783-40d2-b432-887a07aef4c3 For help, see: https://nodejs.org/en/docs/inspector 2021-12-31 00:07:37.860 - debug: mqtt.0 (796659) Redis Objects: Use Redis connection: 127.0.0.1:9001 2021-12-31 00:07:37.876 - debug: mqtt.0 (796659) Objects client ready ... initialize now 2021-12-31 00:07:37.876 - debug: mqtt.0 (796659) Objects create System PubSub Client 2021-12-31 00:07:37.877 - debug: mqtt.0 (796659) Objects create User PubSub Client 2021-12-31 00:07:37.877 - debug: mqtt.0 (796659) Objects client initialize lua scripts 2021-12-31 00:07:37.883 - debug: mqtt.0 (796659) Objects connected to redis: 127.0.0.1:9001 2021-12-31 00:07:37.886 - debug: mqtt.0 (796659) objectDB connected 2021-12-31 00:07:37.886 - debug: mqtt.0 (796659) Redis States: Use Redis connection: 127.0.0.1:9000 2021-12-31 00:07:37.890 - debug: mqtt.0 (796659) States create System PubSub Client 2021-12-31 00:07:37.890 - debug: mqtt.0 (796659) States create User PubSub Client 2021-12-31 00:07:37.894 - debug: mqtt.0 (796659) States connected to redis: 127.0.0.1:9000 2021-12-31 00:07:37.895 - debug: mqtt.0 (796659) statesDB connected 2021-12-31 00:07:38.015 - debug: mqtt.0 (796659) Plugin sentry Initialize Plugin (enabled=true) 2021-12-31 00:07:38.063 - error: mqtt.0 (796659) adapter disabled 2021-12-31 00:07:38.064 - info: mqtt.0 (796659) starting. Version 2.4.1 in /opt/iobroker/node_modules/iobroker.mqtt, node: v14.18.2, js-controller: 3.3.22 2021-12-31 00:07:38.143 - info: mqtt.0 (796659) Starting MQTT authenticated server on 0.0.0.0:1883 2021-12-31 00:07:38.143 - info: mqtt.0 (796659) Starting MQTT-WebSocket authenticated server on 0.0.0.0:1884 2021-12-31 00:07:38.192 - debug: mqtt.0 (796659) stateChange mqtt.0.info.connection: {"val":"","ack":true,"ts":1640905658191,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905658191} 2021-12-31 00:07:38.193 - debug: mqtt.0 (796659) onStateChange mqtt.0.info.connection: {"val":"","ack":true,"ts":1640905658191,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905658191} 2021-12-31 00:07:41.873 - info: mqtt.0 (796659) Client [wasser] connected with secret 1640905661865_7445 2021-12-31 00:07:41.906 - debug: mqtt.0 (796659) Client [wasser] with last will {"retain":true,"qos":0,"topic":"wasserzaehler/connection","payload":{"type":"Buffer","data":[99,111,110,110,101,99,116,105,111,110,32,108,111,115,116]}} 2021-12-31 00:07:41.906 - debug: mqtt.0 (796659) Client [wasser] with keepalive 60 set timeout to 90 seconds 2021-12-31 00:07:41.914 - debug: mqtt.0 (796659) stateChange mqtt.0.info.connection: {"val":"wasser","ack":true,"ts":1640905661913,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905661913} 2021-12-31 00:07:41.915 - debug: mqtt.0 (796659) onStateChange mqtt.0.info.connection: {"val":"wasser","ack":true,"ts":1640905661913,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905661913} 2021-12-31 00:07:42.910 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:08:12.919 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:08:43.008 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:09:13.209 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:09:38.843 - info: mqtt.0 (796659) Client [wasser] reconnected. Old secret 1640905661865_7445. New secret 1640905778840_6011 2021-12-31 00:09:38.845 - debug: mqtt.0 (796659) Client [wasser] with last will {"retain":true,"qos":0,"topic":"wasserzaehler/connection","payload":{"type":"Buffer","data":[99,111,110,110,101,99,116,105,111,110,32,108,111,115,116]}} 2021-12-31 00:09:38.846 - debug: mqtt.0 (796659) Client [wasser] with keepalive 60 set timeout to 90 seconds 2021-12-31 00:09:38.857 - debug: mqtt.0 (796659) stateChange mqtt.0.info.connection: {"val":"wasser","ack":true,"ts":1640905778852,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905661913} 2021-12-31 00:10:08.860 - debug: mqtt.0 (796659) Client [wasser] pingreq 2021-12-31 00:10:31.997 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.connection: {"val":"connected","ack":true,"ts":1640905831993,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640416562800} 2021-12-31 00:10:32.007 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.uptime: {"val":60,"ack":true,"ts":1640905832001,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905479400} 2021-12-31 00:10:32.016 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.freeMem: {"val":2987715,"ack":true,"ts":1640905832009,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832009} 2021-12-31 00:10:32.017 - debug: mqtt.0 (796659) onStateChange mqtt.0.wasserzaehler.freeMem: {"val":2987715,"ack":true,"ts":1640905832009,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832009} 2021-12-31 00:10:32.024 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.value: {"val":288.5381,"ack":true,"ts":1640905832018,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640903413572} 2021-12-31 00:10:32.032 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.error: {"val":"no error","ack":true,"ts":1640905832028,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640889028083} 2021-12-31 00:10:32.034 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.rate: {"val":0,"ack":true,"ts":1640905832029,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640903704690} 2021-12-31 00:10:32.045 - error: mqtt.0 (796659) Client [wasser] Cannot parse {"value":288.5381,"raw":"00288.5381,"error":"no error","rate":0.000000,"timestamp":"2021-12-31T00:09:47"} 2021-12-31 00:10:32.048 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.raw: {"val":"00288.5381","ack":true,"ts":1640905832046,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640903413590} 2021-12-31 00:10:32.050 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.timestamp: {"val":"2021-12-31T00:09:47","ack":true,"ts":1640905832048,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832048} 2021-12-31 00:10:32.050 - debug: mqtt.0 (796659) onStateChange mqtt.0.wasserzaehler.main.timestamp: {"val":"2021-12-31T00:09:47","ack":true,"ts":1640905832048,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832048} 2021-12-31 00:10:32.138 - debug: mqtt.0 (796659) stateChange mqtt.0.wasserzaehler.main.json: {"val":"{\"value\":288.5381,\"raw\":\"00288.5381,\"error\":\"no error\",\"rate\":0.000000,\"timestamp\":\"2021-12-31T00:09:47\"}","ack":true,"ts":1640905832134,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832134} 2021-12-31 00:10:32.139 - debug: mqtt.0 (796659) onStateChange mqtt.0.wasserzaehler.main.json: {"val":"{\"value\":288.5381,\"raw\":\"00288.5381,\"error\":\"no error\",\"rate\":0.000000,\"timestamp\":\"2021-12-31T00:09:47\"}","ack":true,"ts":1640905832134,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1640905832134} Andreas@iobroker:~$ all ws gone! 2021-12-31 00:10:51.102 - debug: mqtt.0 (796659) Plugin sentry destroyed 2021-12-31 00:10:51.103 - info: mqtt.0 (796659) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reasonLaut Apollon77:
{"value":288.5381,"raw":"00288.5381,"error":"no error","rate":0.000000,"timestamp":"2021-12-31T00:09:47"}
Check the "raw" value ... is starts as a string, but there are mo double quotes afte rthe number and before error field.To be correct it wuld be needed to be that way:
{"value":288.5381,"raw":"00288.5381","error":"no error","rate":0.000000,"timestamp":"2021-12-31T00:09:47"}
@andreas_z sagte in Wasserzähler - Version 2 - all-in-device:
timestamp
Danke für den Hinweis - habe gerade einen Patch hochgeladen (v10.0.1)
-
@andreas_z sagte in Wasserzähler - Version 2 - all-in-device:
timestamp
Danke für den Hinweis - habe gerade einen Patch hochgeladen (v10.0.1)
@jomjol
Der Dank geht an Apollo77 :-)
Ich habe aber noch einen weiteren Parse-Fehler bei Neg-Read:mqtt.1 2021-12-31 14:14:53.026 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.06","error":"Neg. Rate - Read: 18010.06 - Raw: 18010.06 - Pre: 18010.94 ","rate":"","timestamp":""} mqtt.1 2021-12-31 14:10:02.039 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.05","error":"Neg. Rate - Read: 18010.05 - Raw: 18010.05 - Pre: 18010.94 ","rate":"","timestamp":""} mqtt.1 2021-12-31 14:00:20.035 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.03","error":"Neg. Rate - Read: 18010.03 - Raw: 18010.03 - Pre: 18010.93 ","rate":"","timestamp":""} -
Moin, ich habe das Projekt jetzt auch einige Tage an einem Gaszähler laufen. Ein Gehäuse hab ich mir ausgedruckt aber leider die Spiegelungen mit der internen LED nicht in den Griff bekommen. Also flugs einen WS2812 Strip bestellt, 2 davon abgeschnitten und links und recht oben in den Ecke eingesetzt - Spiegelung nun vernachlässigbar.
Erkennung funktioniert meistens, aber ich sehe, daß manchmal die Bilder nicht korrekt weiß sind sondern mal blau, mal grün sind, irgendwie funktioniert die Ansteuerung des WS2812 nicht immer sauber.
Hat da schon jemand Erfahrungen gemacht? -
@jomjol
Der Dank geht an Apollo77 :-)
Ich habe aber noch einen weiteren Parse-Fehler bei Neg-Read:mqtt.1 2021-12-31 14:14:53.026 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.06","error":"Neg. Rate - Read: 18010.06 - Raw: 18010.06 - Pre: 18010.94 ","rate":"","timestamp":""} mqtt.1 2021-12-31 14:10:02.039 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.05","error":"Neg. Rate - Read: 18010.05 - Raw: 18010.05 - Pre: 18010.94 ","rate":"","timestamp":""} mqtt.1 2021-12-31 14:00:20.035 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.03","error":"Neg. Rate - Read: 18010.03 - Raw: 18010.03 - Pre: 18010.93 ","rate":"","timestamp":""}@andreas_z sagte in Wasserzähler - Version 2 - all-in-device:
@jomjol
Der Dank geht an Apollo77 :-)
Ich habe aber noch einen weiteren Parse-Fehler bei Neg-Read:mqtt.1 2021-12-31 14:14:53.026 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.06","error":"Neg. Rate - Read: 18010.06 - Raw: 18010.06 - Pre: 18010.94 ","rate":"","timestamp":""} mqtt.1 2021-12-31 14:10:02.039 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.05","error":"Neg. Rate - Read: 18010.05 - Raw: 18010.05 - Pre: 18010.94 ","rate":"","timestamp":""} mqtt.1 2021-12-31 14:00:20.035 warn Cannot parse "gaszaehler/main/json": {"value":,"raw":"18010.03","error":"Neg. Rate - Read: 18010.03 - Raw: 18010.03 - Pre: 18010.93 ","rate":"","timestamp":""}Danke für den Hinweis - Version 10.0.2 beseitigt auch diesen Bug.
-
@michmein
Mein Wasserzähler sieht genauso aus wie der auf deinem Bild. Ich würde deine Lösung gerne übernehmen. Hast du den Ausschnitt für den weißen Deckel "von Hand" reingeschnitten oder das stl-File des Wasseruhr-Adapters modifiziert? -
@steffi
Das Problem mit Spiegelung konnte ich mit Hilfe der "Einleger aus 3D Drucker" in Griff bekommen.
-
@michmein
Mein Wasserzähler sieht genauso aus wie der auf deinem Bild. Ich würde deine Lösung gerne übernehmen. Hast du den Ausschnitt für den weißen Deckel "von Hand" reingeschnitten oder das stl-File des Wasseruhr-Adapters modifiziert? -
@jomjol
Ich hätte da noch einen weiteren Interessanten Fehler:mqtt.1 2022-01-02 21:36:56.202 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 19:44:17.605 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 18:41:14.522 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 18:36:23.759 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 18:31:32.678 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 18:26:41.703 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 18:21:23.913 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 18:16:32.771 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 18:11:41.903 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 18:06:50.754 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 18:01:59.758 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:57:09.044 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:52:17.754 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:47:26.849 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:42:35.905 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:37:12.179 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:32:21.008 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:27:29.951 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:22:39.043 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:17:48.147 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:12:56.814 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:08:05.759 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 17:03:15.105 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:58:24.006 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:53:33.176 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:43:06.194 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:38:15.114 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:33:24.050 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:28:33.292 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:23:42.145 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:18:51.085 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:14:00.206 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:09:09.302 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 16:04:18.218 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 15:44:54.267 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 15:40:03.161 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 15:35:12.249 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 15:30:21.306 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 15:25:30.239 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 15:20:39.243 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "string" but received type "number" mqtt.1 2022-01-02 14:46:57.126 info send2Server mqtt.1.awtrix.notify[awtrix/notify] mqtt.1 2022-01-02 14:46:52.131 info send2Server mqtt.1.awtrix.notify[awtrix/notify] mqtt.1 2022-01-02 14:07:25.489 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 09:48:52.413 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 08:45:49.740 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 05:48:51.180 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 05:11:43.492 info send2Server mqtt.1.awtrix.customapp[awtrix/customapp] mqtt.1 2022-01-02 05:01:43.493 info send2Server mqtt.1.awtrix.customapp[awtrix/customapp] mqtt.1 2022-01-02 03:12:04.256 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 03:07:13.467 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 02:47:49.248 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string" mqtt.1 2022-01-02 02:42:58.285 info State value to set for "mqtt.1.gaszaehler.main.raw" has to be type "number" but received type "string"Mal darfs "number" sein und dann wieder "string". Kein Reboot in dem Zeitraum laut Log
Support us
601
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge