UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Fogg]

@fa-bio said in Test Adapter ioBroker.sainlogic v0.6.X GitHub/Latest:

2021-10-11 14:22:03.695 - debug: sainlogic.0 (30283) Data object: {"indoortemp":196,"outdoortemp":21,"dewpointtemp":19,"windchilltemp":21,"indoorhumidity":37,"outdoorhumidity":42,"pressureabs":9933,"pressurerel":9933}

Hier ist tatsächlich ein Eintrag wo weniger Werte kommen als bei allen anderen. Da fehlen einige Werte... wenn ich die alle auf '0' setze weiss ich nicht ob das richtig ist.

Ich muss mir aber wohl noch einen anderen Fehler anschauen... das subcommand was er angibt wird ständig hoch gezählt. das sollte nicht so sein. Ist aber nicht Dein Problem :D

[Fabio]

@fogg alles gut mach dir bitte keinen Stress.:+1:

2021-10-11 16:02:03.588 - info: sainlogic.0 (30283) Scheduler pulling for new data
2021-10-11 16:02:03.668 - debug: sainlogic.0 (30283) Scheduler connected to weather station run 255,255,80,3,83
2021-10-11 16:02:03.673 - debug: sainlogic.0 (30283) FW Scheduler Received data string: ffff501511456173795765617468657256312e352e39
2021-10-11 16:02:03.674 - debug: sainlogic.0 (30283) Data Command received: 80 subcommand 69
2021-10-11 16:02:03.674 - debug: sainlogic.0 (30283) Data object: {"softwaretype":"EasyWeatherV1.5.9"}
2021-10-11 16:02:03.675 - info: sainlogic.0 (30283) Scheduler updating IOBroker states
2021-10-11 16:02:03.675 - debug: sainlogic.0 (30283) Setting value from data for info.softwaretype to EasyWeatherV1.5.9
2021-10-11 16:02:03.675 - debug: sainlogic.0 (30283) Scheduler connected to weather station run 255,255,11,0,6,4,4,25
2021-10-11 16:02:03.687 - debug: sainlogic.0 (30283) FW Scheduler Received data string: ffff0b0050040100e1020093030059040093050093063307440827e40927e40a00110b00000c00000e0000000010000000021100000002120000003d130000003d140000003d150001d19616005e17000e77
2021-10-11 16:02:03.687 - debug: sainlogic.0 (30283) Data Command received: 11 subcommand 4
2021-10-11 16:02:03.688 - debug: sainlogic.0 (30283) Data object: {"indoortemp":225,"outdoortemp":147,"dewpointtemp":89,"windchilltemp":147,"heatindex":147,"indoorhumidity":51,"outdoorhumidity":68,"pressureabs":10212,"pressurerel":10212,"winddir":17,"windspeed":0,"windgustspeed":0,"rain":0,"dailyrain":2,"weeklyrain":2,"monthlyrain":61,"yearlyrain":61,"raintotal":61,"solarradiation":119190,"UVraw":94,"uvi":0}
2021-10-11 16:02:03.688 - info: sainlogic.0 (30283) Scheduler updating IOBroker states
2021-10-11 16:02:03.689 - debug: sainlogic.0 (30283) Setting value from data for weather.current.UVraw to 94
2021-10-11 16:02:03.690 - debug: sainlogic.0 (30283) Setting value from data for weather.current.dailyrain to 0.2
2021-10-11 16:02:03.690 - debug: sainlogic.0 (30283) Target for dailyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.690 - debug: sainlogic.0 (30283) Setting value from data for weather.current.dewpointtemp to 8.9
2021-10-11 16:02:03.691 - debug: sainlogic.0 (30283) Target for dewpointtemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.691 - debug: sainlogic.0 (30283) Setting value from data for weather.current.indoorhumidity to 51
2021-10-11 16:02:03.691 - debug: sainlogic.0 (30283) Setting value from data for weather.current.indoortemp to 22.5
2021-10-11 16:02:03.691 - debug: sainlogic.0 (30283) Target for indoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.692 - debug: sainlogic.0 (30283) Setting value from data for weather.current.monthlyrain to 6.1
2021-10-11 16:02:03.692 - debug: sainlogic.0 (30283) Target for monthlyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.692 - debug: sainlogic.0 (30283) Setting value from data for weather.current.outdoorhumidity to 68
2021-10-11 16:02:03.692 - debug: sainlogic.0 (30283) Setting value from data for weather.current.outdoortemp to 14.7
2021-10-11 16:02:03.693 - debug: sainlogic.0 (30283) Target for outdoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.693 - debug: sainlogic.0 (30283) Setting value from data for weather.current.pressureabs to 1021.2
2021-10-11 16:02:03.693 - debug: sainlogic.0 (30283) Target for pressureabs unit is set: hPa, using conversion: null
2021-10-11 16:02:03.694 - debug: sainlogic.0 (30283) Setting value from data for weather.current.pressurerel to 1021.2
2021-10-11 16:02:03.695 - debug: sainlogic.0 (30283) Target for pressurerel unit is set: hPa, using conversion: null
2021-10-11 16:02:03.695 - debug: sainlogic.0 (30283) Setting value from data for weather.current.solarradiation to 11919
2021-10-11 16:02:03.695 - debug: sainlogic.0 (30283) Target for solarradiation unit is set: lx, using conversion: null
2021-10-11 16:02:03.696 - debug: sainlogic.0 (30283) Setting value from data for weather.current.weeklyrain to 0.2
2021-10-11 16:02:03.696 - debug: sainlogic.0 (30283) Target for weeklyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.696 - debug: sainlogic.0 (30283) Setting value from data for weather.current.windchilltemp to 14.7
2021-10-11 16:02:03.696 - debug: sainlogic.0 (30283) Target for windchilltemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.697 - debug: sainlogic.0 (30283) Setting value from data for weather.current.winddir to 17
2021-10-11 16:02:03.697 - debug: sainlogic.0 (30283) Setting value from data for weather.current.yearlyrain to 6.1
2021-10-11 16:02:03.697 - debug: sainlogic.0 (30283) Target for yearlyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.698 - debug: sainlogic.0 (30283) Scheduler connected to weather station run 255,255,11,0,6,5,5,27
2021-10-11 16:02:03.709 - debug: sainlogic.0 (30283) FW Scheduler Received data string: ffff0b00450501011a0200ec0300a30500ec0641076308281d09281d0b00290c005c0e0000005a1000000021110000003b120000003d130000003d15000d1b8216ffff17060254
2021-10-11 16:02:03.709 - debug: sainlogic.0 (30283) Data Command received: 11 subcommand 5
2021-10-11 16:02:03.709 - debug: sainlogic.0 (30283) Data object: {"indoortemp":282,"outdoortemp":236,"dewpointtemp":163,"heatindex":236,"indoorhumidity":65,"outdoorhumidity":99,"pressureabs":10269,"pressurerel":10269,"windspeed":41,"windgustspeed":92,"rain":90,"dailyrain":33,"weeklyrain":59,"monthlyrain":61,"yearlyrain":61,"solarradiation":859010,"UVraw":65535,"uvi":6}
2021-10-11 16:02:03.710 - info: sainlogic.0 (30283) Scheduler updating IOBroker states
2021-10-11 16:02:03.712 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.UVraw to 65535
2021-10-11 16:02:03.712 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.dailyrain to 3.3
2021-10-11 16:02:03.712 - debug: sainlogic.0 (30283) Target for dailyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.712 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.dewpointtemp to 16.3
2021-10-11 16:02:03.713 - debug: sainlogic.0 (30283) Target for dewpointtemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.713 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.indoorhumidity to 65
2021-10-11 16:02:03.713 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.indoortemp to 28.2
2021-10-11 16:02:03.713 - debug: sainlogic.0 (30283) Target for indoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.714 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.monthlyrain to 6.1
2021-10-11 16:02:03.714 - debug: sainlogic.0 (30283) Target for monthlyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.714 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.outdoorhumidity to 99
2021-10-11 16:02:03.715 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.outdoortemp to 23.6
2021-10-11 16:02:03.715 - debug: sainlogic.0 (30283) Target for outdoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.716 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.pressureabs to 1026.9
2021-10-11 16:02:03.716 - debug: sainlogic.0 (30283) Target for pressureabs unit is set: hPa, using conversion: null
2021-10-11 16:02:03.716 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.pressurerel to 1026.9
2021-10-11 16:02:03.717 - debug: sainlogic.0 (30283) Target for pressurerel unit is set: hPa, using conversion: null
2021-10-11 16:02:03.717 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.rain to 9
2021-10-11 16:02:03.718 - debug: sainlogic.0 (30283) Target for rain unit is set: mm, using conversion: null
2021-10-11 16:02:03.718 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.solarradiation to 85901
2021-10-11 16:02:03.719 - debug: sainlogic.0 (30283) Target for solarradiation unit is set: lx, using conversion: null
2021-10-11 16:02:03.719 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.uvi to 6
2021-10-11 16:02:03.719 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.weeklyrain to 5.9
2021-10-11 16:02:03.720 - debug: sainlogic.0 (30283) Target for weeklyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.720 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.windgustspeed to 33.1
2021-10-11 16:02:03.721 - debug: sainlogic.0 (30283) Target for windgustspeed unit is set: km/h, using conversion: null
2021-10-11 16:02:03.721 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.windspeed to 14.8
2021-10-11 16:02:03.722 - debug: sainlogic.0 (30283) Target for windspeed unit is set: km/h, using conversion: null
2021-10-11 16:02:03.722 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.absolut.yearlyrain to 6.1
2021-10-11 16:02:03.722 - debug: sainlogic.0 (30283) Target for yearlyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.722 - debug: sainlogic.0 (30283) Scheduler connected to weather station run 255,255,11,0,6,6,6,29
2021-10-11 16:02:03.731 - debug: sainlogic.0 (30283) FW Scheduler Received data string: ffff0b001c060100c40200150300130400150625072a0826cd0926cd64ef
2021-10-11 16:02:03.732 - debug: sainlogic.0 (30283) Data Command received: 11 subcommand 6
2021-10-11 16:02:03.733 - debug: sainlogic.0 (30283) Data object: {"indoortemp":196,"outdoortemp":21,"dewpointtemp":19,"windchilltemp":21,"indoorhumidity":37,"outdoorhumidity":42,"pressureabs":9933,"pressurerel":9933}
2021-10-11 16:02:03.733 - info: sainlogic.0 (30283) Scheduler updating IOBroker states
2021-10-11 16:02:03.734 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.absolut.dewpointtemp to 1.9
2021-10-11 16:02:03.735 - debug: sainlogic.0 (30283) Target for dewpointtemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.735 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.absolut.indoorhumidity to 37
2021-10-11 16:02:03.735 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.absolut.indoortemp to 19.6
2021-10-11 16:02:03.736 - debug: sainlogic.0 (30283) Target for indoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.736 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.absolut.outdoorhumidity to 42
2021-10-11 16:02:03.737 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.absolut.outdoortemp to 2.1
2021-10-11 16:02:03.737 - debug: sainlogic.0 (30283) Target for outdoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.738 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.absolut.pressureabs to 993.3
2021-10-11 16:02:03.738 - debug: sainlogic.0 (30283) Target for pressureabs unit is set: hPa, using conversion: null
2021-10-11 16:02:03.739 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.absolut.pressurerel to 993.3
2021-10-11 16:02:03.739 - debug: sainlogic.0 (30283) Target for pressurerel unit is set: hPa, using conversion: null
2021-10-11 16:02:03.739 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.absolut.windchilltemp to 2.1
2021-10-11 16:02:03.740 - debug: sainlogic.0 (30283) Target for windchilltemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.740 - debug: sainlogic.0 (30283) Scheduler connected to weather station run 255,255,11,0,6,7,7,31
2021-10-11 16:02:03.769 - debug: sainlogic.0 (30283) FW Scheduler Received data string: ffff0b004d074100e40e1342009a0e124300760b0545009a0e1246360712476301054827f20a0a4927f20a0a4b00110e2c4c001a0e2c4e0000000c0823550005faa00c2b5600010c2a57030c2a44e0
2021-10-11 16:02:03.770 - debug: sainlogic.0 (30283) Data Command received: 11 subcommand 7
2021-10-11 16:02:03.770 - debug: sainlogic.0 (30283) Data object: {"indoortemp":228,"indoortemptime":3603,"outdoortemp":154,"outdoortemptime":3602,"dewpointtemp":118,"dewpointtemptime":2821,"windchilltemp":154,"windchilltemptime":3602,"indoorhumidity":54,"indoorhumiditytime":1810,"outdoorhumidity":99,"outdoorhumiditytime":261,"pressureabs":10226,"pressureabstime":2570,"pressurerel":10226,"pressurereltime":2570,"windspeed":17,"windspeedtime":3628,"windgustspeed":26,"windgustspeedtime":3628,"dailyrain":12,"dailyraintime":2083,"solarradiation":391840,"solarradiationtime":3115,"UVraw":1,"UVrawtime":3114,"uvi":3,"uvitime":3114}
2021-10-11 16:02:03.771 - info: sainlogic.0 (30283) Scheduler updating IOBroker states
2021-10-11 16:02:03.772 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.UVraw to 1
2021-10-11 16:02:03.773 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.dailyrain to 1.2
2021-10-11 16:02:03.773 - debug: sainlogic.0 (30283) Target for dailyrain unit is set: mm, using conversion: null
2021-10-11 16:02:03.773 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.dewpointtemp to 11.8
2021-10-11 16:02:03.773 - debug: sainlogic.0 (30283) Target for dewpointtemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.774 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.indoorhumidity to 54
2021-10-11 16:02:03.774 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.indoortemp to 22.8
2021-10-11 16:02:03.774 - debug: sainlogic.0 (30283) Target for indoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.774 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.outdoorhumidity to 99
2021-10-11 16:02:03.775 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.outdoortemp to 15.4
2021-10-11 16:02:03.775 - debug: sainlogic.0 (30283) Target for outdoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.775 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.pressureabs to 1022.6
2021-10-11 16:02:03.775 - debug: sainlogic.0 (30283) Target for pressureabs unit is set: hPa, using conversion: null
2021-10-11 16:02:03.776 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.pressurerel to 1022.6
2021-10-11 16:02:03.776 - debug: sainlogic.0 (30283) Target for pressurerel unit is set: hPa, using conversion: null
2021-10-11 16:02:03.776 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.solarradiation to 39184
2021-10-11 16:02:03.776 - debug: sainlogic.0 (30283) Target for solarradiation unit is set: lx, using conversion: null
2021-10-11 16:02:03.776 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.uvi to 3
2021-10-11 16:02:03.777 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.windchilltemp to 15.4
2021-10-11 16:02:03.777 - debug: sainlogic.0 (30283) Target for windchilltemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.777 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.windgustspeed to 9.4
2021-10-11 16:02:03.778 - debug: sainlogic.0 (30283) Target for windgustspeed unit is set: km/h, using conversion: null
2021-10-11 16:02:03.778 - debug: sainlogic.0 (30283) Setting value from data for weather.maxvalues.daily.windspeed to 6.1
2021-10-11 16:02:03.779 - debug: sainlogic.0 (30283) Target for windspeed unit is set: km/h, using conversion: null
2021-10-11 16:02:03.779 - debug: sainlogic.0 (30283) Scheduler connected to weather station run 255,255,11,0,6,8,8,33
2021-10-11 16:02:03.787 - debug: sainlogic.0 (30283) FW Scheduler Received data string: ffff0b002c084100ce0424420035012843003301284400350128462f000c47400e2c4827de06254927de062553dd
2021-10-11 16:02:03.788 - debug: sainlogic.0 (30283) Data Command received: 11 subcommand 8
2021-10-11 16:02:03.788 - debug: sainlogic.0 (30283) Data object: {"indoortemp":206,"indoortemptime":1060,"outdoortemp":53,"outdoortemptime":296,"dewpointtemp":51,"dewpointtemptime":296,"windchilltemp":53,"windchilltemptime":296,"indoorhumidity":47,"indoorhumidityime":12,"outdoorhumidity":64,"outdoorhumiditytime":3628,"pressureabs":10206,"pressureabstime":1573,"pressurerl":10206,"pressurereltime":1573}
2021-10-11 16:02:03.789 - info: sainlogic.0 (30283) Scheduler updating IOBroker states
2021-10-11 16:02:03.790 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.daily.dewpointtemp to 5.1
2021-10-11 16:02:03.790 - debug: sainlogic.0 (30283) Target for dewpointtemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.791 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.daily.indoorhumidity to 47
2021-10-11 16:02:03.791 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.daily.indoortemp to 20.6
2021-10-11 16:02:03.792 - debug: sainlogic.0 (30283) Target for indoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.792 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.daily.outdoorhumidity to 64
2021-10-11 16:02:03.792 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.daily.outdoortemp to 5.3
2021-10-11 16:02:03.793 - debug: sainlogic.0 (30283) Target for outdoortemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.793 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.daily.pressureabs to 1020.6
2021-10-11 16:02:03.794 - debug: sainlogic.0 (30283) Target for pressureabs unit is set: hPa, using conversion: null
2021-10-11 16:02:03.794 - debug: sainlogic.0 (30283) Setting value from data for weather.minvalues.daily.windchilltemp to 5.3
2021-10-11 16:02:03.795 - debug: sainlogic.0 (30283) Target for windchilltemp unit is set: °C, using conversion: null
2021-10-11 16:02:03.799 - debug: sainlogic.0 (30283) FW Scheduler Connection closed

[Neo110]

@fa-bio ich habe das mit Blockly (siehe Post 125) gelöst

[Fabio]

@neo110 Danke dir eine gute Lösung.

[loi83]

Hallo zusammen
ich hab die aktuelle Version und bekomme folgende Fehlermeldung.

ainlogic.0	2021-11-01 10:47:22.975	debug	(19535) FW Scheduler Connection closed
sainlogic.0	2021-11-01 10:47:22.973	error	(19535) Connection error on 192.168.178.103:8097: Error: connect EALREADY 192.168.178.103:8097 - Local (192.168.178.36:59034)
sainlogic.0	2021-11-01 10:47:22.972	info	(19535) Scheduler pulling for new data
sainlogic.0	2021-11-01 10:46:22.971	info	(19535) Scheduler pulling for new data
sainlogic.0	2021-11-01 10:45:22.974	debug	(19535) FW Scheduler Connection closed
sainlogic.0	2021-11-01 10:45:22.972	error	(19535) Connection error on 192.168.178.103:8097: Error: connect EALREADY 192.168.178.103:8097 - Local (192.168.178.36:58304)
sainlogic.0	2021-11-01 10:45:22.970	info	(19535) Scheduler pulling for new data
sainlogic.0	2021-11-01 10:44:22.969	info	(19535) Scheduler pulling for new data
sainlogic.0	2021-11-01 10:43:22.973	debug	(19535) FW Scheduler Connection closed
sainlogic.0	2021-11-01 10:43:22.971	error	(19535) Connection error on 192.168.178.103:8097: Error: connect EALREADY 192.168.178.103:8097 - Local (192.168.178.36:57516)
sainlogic.0	2021-11-01 10:43:22.968	info	(19535) Scheduler pulling for new data
sainlogic.0	2021-11-01 10:42:22.968	info	(19535) Scheduler pulling for new data
sainlogic.0	2021-11-01 10:41:22.971	info	(19535) Starting Listener
sainlogic.0	2021-11-01 10:41:22.970	debug	(19535) Forward URL:
sainlogic.0	2021-11-01 10:41:22.969	debug	(19535) Listener protocol: wunderground
sainlogic.0	2021-11-01 10:41:22.969	debug	(19535) Listener path: /weatherstation/updateweatherstation.php?
sainlogic.0	2021-11-01 10:41:22.969	debug	(19535) Listener port: 8097
sainlogic.0	2021-11-01 10:41:22.968	debug	(19535) Listener IP: 0.0.0.0
sainlogic.0	2021-11-01 10:41:22.967	debug	(19535) Scheduler Interval: 60
sainlogic.0	2021-11-01 10:41:22.967	debug	(19535) Weatherstation port: 8097
sainlogic.0	2021-11-01 10:41:22.966	debug	(19535) Weatherstation IP: 192.168.178.103
sainlogic.0	2021-11-01 10:41:22.965	info	(19535) Scheduler call ws_getcurrent activated
sainlogic.0	2021-11-01 10:41:22.964	info	(19535) Scheduler call ws_getfirmware activated
sainlogic.0	2021-11-01 10:41:22.963	info	(19535) Starting Scheduler

Das Kuriose daran ist, das es am Anfang funktioniert hat, als sich die Temperatur nicht mehr änderte fand ich diesen Error vor. Neustart von Adapter und Container brachten keine Lösung.

[Fabio]

@loi83 er kann sich wohl nicht mit der IP Adresse deiner Wetterstation verbinden. Ist sie denn Online?

[loi83]

@fa-bio ja eigentlich schon. Zumindest kann ich in der App drauf zugreifen und die Daten werden auch an Wunderground übermittelt.

##EDIT##

Hab das Display mal vom Strom, jetzt gehts wieder :face_palm:

[Fabio]

@loi83 Prima 👍

[Waldmensch]

Hallo,

habe den Adapter installiert und greife die Daten von meiner ELV WS980 ab. Den Listener krieg ich nicht zum laufen, aber der Abruf rockt wie er soll. Das einzige, was stört ist, dass ich bei jedem Abruf folgendes Warning im Log hab. Vielleicht kann da mal wer nachschauen

State value to set for "sainlogic.0.weather.maxvalues.absolut.UVraw" has value "65535" greater than max "2000"

Grüße

[Blade1987]

@Fogg
Du hast ja vor langer Zeit mal bezüglich der Weiterleitung geschrieben.
Ich versuche diese verzweifelt einzurichten.

Benötige die Weiterleitung der EcoWitt Rohdaten an internen Server mit Port 45000 ( an diesem werden die Daten auch Empfangen )
Habe es mit sämtlichen URL´s versucht, wird aber nix rausgeschickt.
Im js habe ich ein paar Debugwerte hinzugefügt um rauszufinden wo es hackt.

Komme immer auf diese Ecke

got(fwd_url, { searchParams: json_response, method: 'GET', retry: 0 }).then(response => {
this.adapter.log.info('response.bodyurl' + response.body.url);
this.adapter.log.info('response.body.explanation' + response.body.explanation);

Die bodyurl sowohl als auch die explanation gibt er im Log als undefined aus.
Leider kenne ich mich mit got gar nicht aus und dem JS noch nicht zu tief um den Fehler zu finden.
Im Endeffekt soll er ja wie du beschrieben hast einfach den Request 1:1 an einen weiteren Host weitergeben.

Vielen Dank im Voraus und Vielen Dank für den Umfangreichen Adapter

PS: Genutzt wird die DNT Profi Wetterstation falls das noch interessant wäre

Liebe Grüße
Marco

[wendy2702]

Sehe ich das richtig das der Adapter den Weg ins Stable noch nicht geschafft hat?

[Thomas Braun]

@wendy2702

Müsste drin sein:

sainlogic: 
github:	0.8.1
latest:	0.8.1 for 27 days
stable:	0.8.1 for 27 days

[wendy2702]

Adapter installiert. Als Protokoll Ecowitt ausgewählt weil da eigentlich auch der Batteriestatus übertragen wird.

Wenn ich auf Scheduler stelle sieht es bei meiner W830 so im log aus:

2022-02-10 18:02:28.044  - info: sainlogic.0 (4190) starting. Version 0.8.1 (non-npm: phifogg/ioBroker.sainlogic#9e7d2bc23ed5074f4a5d6d58a74764418f20b70e) in /opt/iobroker/node_modules/iobroker.sainlogic, node: v14.19.0, js-controller: 4.0.7
2022-02-10 18:02:28.079  - info: sainlogic.0 (4190) Starting Scheduler
2022-02-10 18:02:28.080  - info: sainlogic.0 (4190) Scheduler call ws_getfirmware activated
2022-02-10 18:02:28.080  - info: sainlogic.0 (4190) Scheduler call ws_getcurrent activated
2022-02-10 18:02:28.080  - info: sainlogic.0 (4190) Scheduler call ws_getmax activated
2022-02-10 18:02:28.080  - info: sainlogic.0 (4190) Scheduler call ws_getmin activated
2022-02-10 18:02:28.081  - info: sainlogic.0 (4190) Scheduler call ws_getmaxdaily activated
2022-02-10 18:02:28.081  - debug: sainlogic.0 (4190) Weatherstation IP: 192.168.178.137
2022-02-10 18:02:28.081  - debug: sainlogic.0 (4190) Weatherstation port: 45000
2022-02-10 18:02:28.081  - debug: sainlogic.0 (4190) Scheduler Interval: 30
2022-02-10 18:02:58.081  - info: sainlogic.0 (4190) Scheduler pulling for new data
2022-02-10 18:02:58.096  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,80,3,83
2022-02-10 18:02:58.099  - debug: sainlogic.0 (4190) FW Scheduler Received data string: ffff501511456173795765617468657256312e362e31
2022-02-10 18:02:58.100  - debug: sainlogic.0 (4190) Data Command received: 80 subcommand 69
2022-02-10 18:02:58.101  - debug: sainlogic.0 (4190) Data object: {"softwaretype":"EasyWeatherV1.6.1"}
2022-02-10 18:02:58.101  - info: sainlogic.0 (4190) Scheduler updating IOBroker states
2022-02-10 18:02:58.102  - debug: sainlogic.0 (4190) Setting value from data for info.softwaretype to EasyWeatherV1.6.1
2022-02-10 18:02:58.102  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,11,0,6,4,4,25
2022-02-10 18:03:28.081  - info: sainlogic.0 (4190) Scheduler pulling for new data
2022-02-10 18:03:28.082  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,80,3,83
2022-02-10 18:03:28.084  - debug: sainlogic.0 (4190) FW Scheduler Received data string: ffff501511456173795765617468657256312e362e31
2022-02-10 18:03:28.085  - debug: sainlogic.0 (4190) Data Command received: 80 subcommand 69
2022-02-10 18:03:28.085  - debug: sainlogic.0 (4190) Data object: {"softwaretype":"EasyWeatherV1.6.1"}
2022-02-10 18:03:28.085  - info: sainlogic.0 (4190) Scheduler updating IOBroker states
2022-02-10 18:03:28.085  - debug: sainlogic.0 (4190) Setting value from data for info.softwaretype to EasyWeatherV1.6.1
2022-02-10 18:03:28.086  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,11,0,6,4,4,25
2022-02-10 18:03:58.081  - info: sainlogic.0 (4190) Scheduler pulling for new data
2022-02-10 18:03:58.083  - error: sainlogic.0 (4190) Connection error on 192.168.178.137:45000: Error: connect EISCONN 192.168.178.137:45000 - Local (192.168.178.18:57034)
2022-02-10 18:03:58.085  - debug: sainlogic.0 (4190) FW Scheduler Connection closed
2022-02-10 18:04:28.081  - info: sainlogic.0 (4190) Scheduler pulling for new data
2022-02-10 18:04:28.085  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,80,3,83
2022-02-10 18:04:28.085  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,80,3,83
2022-02-10 18:04:28.100  - debug: sainlogic.0 (4190) FW Scheduler Received data string: ffff501511456173795765617468657256312e362e31
2022-02-10 18:04:28.101  - debug: sainlogic.0 (4190) Data Command received: 80 subcommand 69
2022-02-10 18:04:28.101  - debug: sainlogic.0 (4190) Data object: {"softwaretype":"EasyWeatherV1.6.1"}
2022-02-10 18:04:28.101  - info: sainlogic.0 (4190) Scheduler updating IOBroker states
2022-02-10 18:04:28.102  - debug: sainlogic.0 (4190) Setting value from data for info.softwaretype to EasyWeatherV1.6.1
2022-02-10 18:04:28.102  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,11,0,6,4,4,25
2022-02-10 18:04:28.104  - debug: sainlogic.0 (4190) FW Scheduler Received data string: ffff501511456173795765617468657256312e362e31
2022-02-10 18:04:28.104  - debug: sainlogic.0 (4190) Data Command received: 80 subcommand 69
2022-02-10 18:04:28.105  - debug: sainlogic.0 (4190) Data object: {"softwaretype":"EasyWeatherV1.6.1"}
2022-02-10 18:04:28.106  - info: sainlogic.0 (4190) Scheduler updating IOBroker states
2022-02-10 18:04:28.106  - debug: sainlogic.0 (4190) Setting value from data for info.softwaretype to EasyWeatherV1.6.1
2022-02-10 18:04:28.107  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,11,0,6,5,5,27
2022-02-10 18:04:58.081  - info: sainlogic.0 (4190) Scheduler pulling for new data
2022-02-10 18:04:58.082  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,80,3,83
2022-02-10 18:04:58.092  - debug: sainlogic.0 (4190) FW Scheduler Received data string: ffff501511456173795765617468657256312e362e31
2022-02-10 18:04:58.092  - debug: sainlogic.0 (4190) Data Command received: 80 subcommand 69
2022-02-10 18:04:58.092  - debug: sainlogic.0 (4190) Data object: {"softwaretype":"EasyWeatherV1.6.1"}
2022-02-10 18:04:58.092  - info: sainlogic.0 (4190) Scheduler updating IOBroker states
2022-02-10 18:04:58.093  - debug: sainlogic.0 (4190) Setting value from data for info.softwaretype to EasyWeatherV1.6.1
2022-02-10 18:04:58.093  - debug: sainlogic.0 (4190) Scheduler connected to weather station run 255,255,11,0,6,4,4,25
2022-02-10 18:05:28.081  - info: sainlogic.0 (4190) Scheduler pulling for new data
2022-02-10 18:05:28.082  - error: sainlogic.0 (4190) Connection error on 192.168.178.137:45000: Error: connect EISCONN 192.168.178.137:45000 - Local (192.168.178.18:57768)
2022-02-10 18:05:28.085  - debug: sainlogic.0 (4190) FW Scheduler Connection closed
2022-02-10 18:05:58.082  - info: sainlogic.0 (4190) Scheduler pulling for new data

Und so in den Objecten:

Stelle ich auf Listener um kommt das:

2022-02-10 18:12:27.844  - debug: sainlogic.0 (4622) States create System PubSub Client
2022-02-10 18:12:27.844  - debug: sainlogic.0 (4622) States create User PubSub Client
2022-02-10 18:12:27.885  - debug: sainlogic.0 (4622) States connected to redis: 0.0.0.0:9000
2022-02-10 18:12:28.197  - info: sainlogic.0 (4622) starting. Version 0.8.1 (non-npm: phifogg/ioBroker.sainlogic#9e7d2bc23ed5074f4a5d6d58a74764418f20b70e) in /opt/iobroker/node_modules/iobroker.sainlogic, node: v14.19.0, js-controller: 4.0.7
2022-02-10 18:12:28.230  - debug: sainlogic.0 (4622) Listener IP: 192.168.178.18
2022-02-10 18:12:28.230  - debug: sainlogic.0 (4622) Listener port: 45000
2022-02-10 18:12:28.230  - debug: sainlogic.0 (4622) Listener path: /weatherstation/updateweatherstation.php
2022-02-10 18:12:28.230  - debug: sainlogic.0 (4622) Listener protocol: ecowitt
2022-02-10 18:12:28.231  - debug: sainlogic.0 (4622) Forward URL:
2022-02-10 18:12:28.231  - info: sainlogic.0 (4622) Starting Listener
2022-02-10 18:12:33.771  - debug: sainlogic.0 (4622) Listener body is PASSKEY=6E8D338577B841F7DC608157C88988C7&stationtype=EasyWeatherV1.6.1&dateutc=2022-02-10+17:12:31&tempinf=71.1&humidityin=47&baromrelin=30.225&baromabsin=29.743&tempf=42.3&humidity=95&winddir=253&windspeedmph=0.7&windgustmph=1.1&maxdailygust=13.6&rainratein=0.000&eventrainin=0.110&hourlyrainin=0.000&dailyrainin=0.122&weeklyrainin=1.551&monthlyrainin=1.772&totalrainin=68.295&solarradiation=0.00&uv=0&wh65batt=0&freq=868M&model=WS2900_V2.01.10
2022-02-10 18:12:33.772  - debug: sainlogic.0 (4622) No mapping found for dataelement: PASSKEY
2022-02-10 18:12:33.773  - debug: sainlogic.0 (4622) Extracting value for info.softwaretype(stationtype)
2022-02-10 18:12:33.773  - debug: sainlogic.0 (4622) No mapping found for dataelement: dateutc
2022-02-10 18:12:33.773  - debug: sainlogic.0 (4622) Extracting value for weather.current.indoortemp(tempinf)
2022-02-10 18:12:33.776  - debug: sainlogic.0 (4622) Extracting value for weather.current.indoorhumidity(humidityin)
2022-02-10 18:12:33.777  - debug: sainlogic.0 (4622) Extracting value for weather.current.pressurerel(baromrelin)
2022-02-10 18:12:33.777  - debug: sainlogic.0 (4622) Extracting value for weather.current.pressureabs(baromabsin)
2022-02-10 18:12:33.778  - debug: sainlogic.0 (4622) Extracting value for weather.current.outdoortemp(tempf)
2022-02-10 18:12:33.778  - debug: sainlogic.0 (4622) Extracting value for weather.current.outdoorhumidity(humidity)
2022-02-10 18:12:33.778  - debug: sainlogic.0 (4622) Extracting value for weather.current.winddir(winddir)
2022-02-10 18:12:33.778  - debug: sainlogic.0 (4622) Extracting value for weather.current.windspeed(windspeedmph)
2022-02-10 18:12:33.779  - debug: sainlogic.0 (4622) Extracting value for weather.current.windgustspeed(windgustmph)
2022-02-10 18:12:33.779  - debug: sainlogic.0 (4622) Extracting value for weather.current.maxdailygust(maxdailygust)
2022-02-10 18:12:33.779  - debug: sainlogic.0 (4622) Extracting value for weather.current.rain(rainratein)
2022-02-10 18:12:33.780  - debug: sainlogic.0 (4622) No mapping found for dataelement: eventrainin
2022-02-10 18:12:33.780  - debug: sainlogic.0 (4622) No mapping found for dataelement: hourlyrainin
2022-02-10 18:12:33.780  - debug: sainlogic.0 (4622) Extracting value for weather.current.dailyrain(dailyrainin)
2022-02-10 18:12:33.780  - debug: sainlogic.0 (4622) Extracting value for weather.current.weeklyrain(weeklyrainin)
2022-02-10 18:12:33.780  - debug: sainlogic.0 (4622) Extracting value for weather.current.monthlyrain(monthlyrainin)
2022-02-10 18:12:33.781  - debug: sainlogic.0 (4622) No mapping found for dataelement: totalrainin
2022-02-10 18:12:33.781  - debug: sainlogic.0 (4622) Extracting value for weather.current.solarradiation(solarradiation)
2022-02-10 18:12:33.781  - debug: sainlogic.0 (4622) Extracting value for weather.current.uvi(uv)
2022-02-10 18:12:33.781  - debug: sainlogic.0 (4622) No mapping found for dataelement: wh65batt
2022-02-10 18:12:33.781  - debug: sainlogic.0 (4622) Extracting value for info.freq(freq)
2022-02-10 18:12:33.781  - debug: sainlogic.0 (4622) Extracting value for info.model(model)
2022-02-10 18:12:33.782  - debug: sainlogic.0 (4622) Setting value from data for info.softwaretype to EasyWeatherV1.6.1
2022-02-10 18:12:33.782  - debug: sainlogic.0 (4622) Setting value from data for weather.current.indoortemp to 21.7
2022-02-10 18:12:33.783  - debug: sainlogic.0 (4622) Target for indoortemp unit is set: °C, using conversion: null
2022-02-10 18:12:33.783  - debug: sainlogic.0 (4622) Setting value from data for weather.current.indoorhumidity to 47
2022-02-10 18:12:33.783  - debug: sainlogic.0 (4622) Setting value from data for weather.current.pressurerel to 1023.4
2022-02-10 18:12:33.783  - debug: sainlogic.0 (4622) Target for pressurerel unit is set: hPa, using conversion: null
2022-02-10 18:12:33.783  - debug: sainlogic.0 (4622) Setting value from data for weather.current.pressureabs to 1007.1
2022-02-10 18:12:33.783  - debug: sainlogic.0 (4622) Target for pressureabs unit is set: hPa, using conversion: null
2022-02-10 18:12:33.784  - debug: sainlogic.0 (4622) Setting value from data for weather.current.outdoortemp to 5.7
2022-02-10 18:12:33.784  - debug: sainlogic.0 (4622) Target for outdoortemp unit is set: °C, using conversion: null
2022-02-10 18:12:33.784  - debug: sainlogic.0 (4622) Setting value from data for weather.current.outdoorhumidity to 95
2022-02-10 18:12:33.784  - debug: sainlogic.0 (4622) Setting value from data for weather.current.winddir to 253
2022-02-10 18:12:33.784  - debug: sainlogic.0 (4622) Setting value from data for weather.current.windspeed to 1.1
2022-02-10 18:12:33.785  - debug: sainlogic.0 (4622) Target for windspeed unit is set: km/h, using conversion: null
2022-02-10 18:12:33.785  - debug: sainlogic.0 (4622) Setting value from data for weather.current.windgustspeed to 1.8
2022-02-10 18:12:33.785  - debug: sainlogic.0 (4622) Target for windgustspeed unit is set: km/h, using conversion: null
2022-02-10 18:12:33.785  - debug: sainlogic.0 (4622) Setting value from data for weather.current.maxdailygust to 21.9
2022-02-10 18:12:33.785  - debug: sainlogic.0 (4622) Target for maxdailygust unit is set: km/h, using conversion: null
2022-02-10 18:12:33.785  - debug: sainlogic.0 (4622) Setting value from data for weather.current.rain to 0
2022-02-10 18:12:33.785  - debug: sainlogic.0 (4622) Target for rain unit is set: mm, using conversion: null
2022-02-10 18:12:33.786  - debug: sainlogic.0 (4622) Setting value from data for weather.current.dailyrain to 3.1
2022-02-10 18:12:33.786  - debug: sainlogic.0 (4622) Target for dailyrain unit is set: mm, using conversion: null
2022-02-10 18:12:33.786  - debug: sainlogic.0 (4622) Setting value from data for weather.current.weeklyrain to 39.4
2022-02-10 18:12:33.786  - debug: sainlogic.0 (4622) Target for weeklyrain unit is set: mm, using conversion: null
2022-02-10 18:12:33.786  - debug: sainlogic.0 (4622) Setting value from data for weather.current.monthlyrain to 45
2022-02-10 18:12:33.786  - debug: sainlogic.0 (4622) Target for monthlyrain unit is set: mm, using conversion: null
2022-02-10 18:12:33.786  - debug: sainlogic.0 (4622) Setting value from data for weather.current.solarradiation to 0
2022-02-10 18:12:33.786  - debug: sainlogic.0 (4622) Target for solarradiation unit is set: lx, using conversion: null
2022-02-10 18:12:33.787  - debug: sainlogic.0 (4622) Setting value from data for weather.current.uvi to 0
2022-02-10 18:12:33.787  - debug: sainlogic.0 (4622) Setting value from data for info.freq to 868M
2022-02-10 18:12:33.787  - debug: sainlogic.0 (4622) Setting value from data for info.model to WS2900_V2.01.10
2022-02-10 18:12:33.787  - debug: sainlogic.0 (4622) Listener received EW update: {"PASSKEY":"6E8D338577B841F7DC608157C88988C7","stationtype":"EasyWeatherV1.6.1","dateutc":"2022-02-10 17:12:31","tempinf":"71.1","humidityin":"47","baromrelin":"30.225","baromabsin":"29.743","tempf":"42.3","humidity":"95","winddir":"253","windspeedmph":"0.7","windgustmph":"1.1","maxdailygust":"13.6","rainratein":"0.000","eventrainin":"0.110","hourlyrainin":"0.000","dailyrainin":"0.122","weeklyrainin":"1.551","monthlyrainin":"1.772","totalrainin":"68.295","solarradiation":"0.00","uv":"0","wh65batt":"0","freq":"868M","model":"WS2900_V2.01.10"}
2022-02-10 18:13:13.798  - debug: sainlogic.0 (4622) Listener body is PASSKEY=6E8D338577B841F7DC608157C88988C7&stationtype=EasyWeatherV1.6.1&dateutc=2022-02-10+17:13:10&tempinf=71.1&humidityin=47&baromrelin=30.225&baromabsin=29.743&tempf=42.3&humidity=95&winddir=253&windspeedmph=0.2&windgustmph=1.1&maxdailygust=13.6&rainratein=0.000&eventrainin=0.110&hourlyrainin=0.000&dailyrainin=0.122&weeklyrainin=1.551&monthlyrainin=1.772&totalrainin=68.295&solarradiation=0.00&uv=0&wh65batt=0&freq=868M&model=WS2900_V2.01.10
2022-02-10 18:13:13.799  - debug: sainlogic.0 (4622) No mapping found for dataelement: PASSKEY
2022-02-10 18:13:13.799  - debug: sainlogic.0 (4622) Extracting value for info.softwaretype(stationtype)
2022-02-10 18:13:13.800  - debug: sainlogic.0 (4622) No mapping found for dataelement: dateutc
2022-02-10 18:13:13.800  - debug: sainlogic.0 (4622) Extracting value for weather.current.indoortemp(tempinf)
2022-02-10 18:13:13.800  - debug: sainlogic.0 (4622) Extracting value for weather.current.indoorhumidity(humidityin)
2022-02-10 18:13:13.800  - debug: sainlogic.0 (4622) Extracting value for weather.current.pressurerel(baromrelin)
2022-02-10 18:13:13.800  - debug: sainlogic.0 (4622) Extracting value for weather.current.pressureabs(baromabsin)
2022-02-10 18:13:13.801  - debug: sainlogic.0 (4622) Extracting value for weather.current.outdoortemp(tempf)
2022-02-10 18:13:13.801  - debug: sainlogic.0 (4622) Extracting value for weather.current.outdoorhumidity(humidity)
2022-02-10 18:13:13.801  - debug: sainlogic.0 (4622) Extracting value for weather.current.winddir(winddir)
2022-02-10 18:13:13.801  - debug: sainlogic.0 (4622) Extracting value for weather.current.windspeed(windspeedmph)
2022-02-10 18:13:13.801  - debug: sainlogic.0 (4622) Extracting value for weather.current.windgustspeed(windgustmph)
2022-02-10 18:13:13.801  - debug: sainlogic.0 (4622) Extracting value for weather.current.maxdailygust(maxdailygust)
2022-02-10 18:13:13.801  - debug: sainlogic.0 (4622) Extracting value for weather.current.rain(rainratein)
2022-02-10 18:13:13.802  - debug: sainlogic.0 (4622) No mapping found for dataelement: eventrainin
2022-02-10 18:13:13.802  - debug: sainlogic.0 (4622) No mapping found for dataelement: hourlyrainin
2022-02-10 18:13:13.802  - debug: sainlogic.0 (4622) Extracting value for weather.current.dailyrain(dailyrainin)
2022-02-10 18:13:13.802  - debug: sainlogic.0 (4622) Extracting value for weather.current.weeklyrain(weeklyrainin)
2022-02-10 18:13:13.802  - debug: sainlogic.0 (4622) Extracting value for weather.current.monthlyrain(monthlyrainin)
2022-02-10 18:13:13.802  - debug: sainlogic.0 (4622) No mapping found for dataelement: totalrainin
2022-02-10 18:13:13.803  - debug: sainlogic.0 (4622) Extracting value for weather.current.solarradiation(solarradiation)
2022-02-10 18:13:13.803  - debug: sainlogic.0 (4622) Extracting value for weather.current.uvi(uv)
2022-02-10 18:13:13.803  - debug: sainlogic.0 (4622) No mapping found for dataelement: wh65batt
2022-02-10 18:13:13.803  - debug: sainlogic.0 (4622) Extracting value for info.freq(freq)
2022-02-10 18:13:13.803  - debug: sainlogic.0 (4622) Extracting value for info.model(model)
2022-02-10 18:13:13.803  - debug: sainlogic.0 (4622) Setting value from data for info.softwaretype to EasyWeatherV1.6.1
2022-02-10 18:13:13.803  - debug: sainlogic.0 (4622) Setting value from data for weather.current.indoortemp to 21.7
2022-02-10 18:13:13.803  - debug: sainlogic.0 (4622) Target for indoortemp unit is set: °C, using conversion: null
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Setting value from data for weather.current.indoorhumidity to 47
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Setting value from data for weather.current.pressurerel to 1023.4
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Target for pressurerel unit is set: hPa, using conversion: null
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Setting value from data for weather.current.pressureabs to 1007.1
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Target for pressureabs unit is set: hPa, using conversion: null
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Setting value from data for weather.current.outdoortemp to 5.7
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Target for outdoortemp unit is set: °C, using conversion: null
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Setting value from data for weather.current.outdoorhumidity to 95
2022-02-10 18:13:13.804  - debug: sainlogic.0 (4622) Setting value from data for weather.current.winddir to 253
2022-02-10 18:13:13.805  - debug: sainlogic.0 (4622) Setting value from data for weather.current.windspeed to 0.3
2022-02-10 18:13:13.805  - debug: sainlogic.0 (4622) Target for windspeed unit is set: km/h, using conversion: null
2022-02-10 18:13:13.805  - debug: sainlogic.0 (4622) Setting value from data for weather.current.windgustspeed to 1.8
2022-02-10 18:13:13.805  - debug: sainlogic.0 (4622) Target for windgustspeed unit is set: km/h, using conversion: null
2022-02-10 18:13:13.805  - debug: sainlogic.0 (4622) Setting value from data for weather.current.maxdailygust to 21.9
2022-02-10 18:13:13.805  - debug: sainlogic.0 (4622) Target for maxdailygust unit is set: km/h, using conversion: null
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Setting value from data for weather.current.rain to 0
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Target for rain unit is set: mm, using conversion: null
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Setting value from data for weather.current.dailyrain to 3.1
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Target for dailyrain unit is set: mm, using conversion: null
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Setting value from data for weather.current.weeklyrain to 39.4
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Target for weeklyrain unit is set: mm, using conversion: null
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Setting value from data for weather.current.monthlyrain to 45
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Target for monthlyrain unit is set: mm, using conversion: null
2022-02-10 18:13:13.806  - debug: sainlogic.0 (4622) Setting value from data for weather.current.solarradiation to 0
2022-02-10 18:13:13.807  - debug: sainlogic.0 (4622) Target for solarradiation unit is set: lx, using conversion: null
2022-02-10 18:13:13.807  - debug: sainlogic.0 (4622) Setting value from data for weather.current.uvi to 0
2022-02-10 18:13:13.807  - debug: sainlogic.0 (4622) Setting value from data for info.freq to 868M
2022-02-10 18:13:13.807  - debug: sainlogic.0 (4622) Setting value from data for info.model to WS2900_V2.01.10
2022-02-10 18:13:13.807  - debug: sainlogic.0 (4622) Listener received EW update: {"PASSKEY":"6E8D338577B841F7DC608157C88988C7","stationtype":"EasyWeatherV1.6.1","dateutc":"2022-02-10 17:13:10","tempinf":"71.1","humidityin":"47","baromrelin":"30.225","baromabsin":"29.743","tempf":"42.3","humidity":"95","winddir":"253","windspeedmph":"0.2","windgustmph":"1.1","maxdailygust":"13.6","rainratein":"0.000","eventrainin":"0.110","hourlyrainin":"0.000","dailyrainin":"0.122","weeklyrainin":"1.551","monthlyrainin":"1.772","totalrainin":"68.295","solarradiation":"0.00","uv":"0","wh65batt":"0","freq":"868M","model":"WS2900_V2.01.10"}

Und ein Teil der DPs werden befüllt:

Datenpunkte wie z.B. UVRaw sollte doch aber im Ecowitt Protokoll enthalten sein zumindest bekomme ich bei Verwendung des Scripts einen Wert.

Liegt da nich was im Adapter oder ist meine Station nicht 100% kompatibel?

[rotamint]

Hallo zusammen! Ich habe eine grundlegende Frage zum Sainlogic-Adapter. Ich habe folgende Komponenten bei froggit.de gekauft:

Außeneinheit

zusammen mit

WiFi-USB-Dongle DP1500

Das ganze nach reichlich Nachlesem, "try & error" und wieder Nachlesen letztendlich mit dem Sainlogic-Adapter V.0.9.0 lauffähig bekommen:

Jedoch liefern die Datenpunkte "info, maxvalues und minvalues" keine Werte (null)
Ich vermute es hängt damit zusammen, dass die "Zeitplaneinstellungen" (pull) in der Config deaktiv steht (meine ich so bei Thomas Braun gelesen zu haben).

Setze ich die "Zeitplaneinstellungen" auf aktiv,

erhalte ich folgende Fehlermeldung ohne Veränderung der "null-Daten"

Hierzu meine Fragen:

Habe ich was falsch eingestellt (wenn ja - was), soviel kann da ja nicht konfiguriert werden.
Wer "erzeugt / liefert" die "Min- Maxvalues". Die Außeneinheit? Der DP1500 USB-Dongle? Ggf. das nicht vorhandene Display?
Wer hat eine Idee, wie ich das Problem lösen kann?

Danke für Eure Unterstützung, in diesem Sinne, ein tolles sonniges Wochenende!

S.

[mcm1957]

@rotamint
I do not see Min/Max values using listener mode too. i'm using a Conrad Eurochron EFWS2900. Actual values seem to be ok. I've created a issue https://github.com/phifogg/ioBroker.sainlogic/issues/131

In respect to unknow subcommand this topic might be covered by issue
https://github.com/phifogg/ioBroker.sainlogic/issues/127

[mcm1957]

According to phifoggs responce at issue 131 the min/max values will be set ONLY if the station itself transmits min/max values. Tha adapter does NOT calculate any values.

---

Laut phifoggs Antwort auf Issue 131 werden die Min/Max-Werte NUR gesetzt, wenn die Station selbst Min/Max-Werte sendet. Der Adapter berechnet KEINE Werte.

[rotamint]

@mcm57 sagte in Test Adapter ioBroker.sainlogic v0.6.X GitHub/Latest:

According to phifoggs responce at issue 131 the min/max values will be set ONLY if the station itself transmits min/max values. Tha adapter does NOT calculate any values.

---

Laut phifoggs Antwort auf Issue 131 werden die Min/Max-Werte NUR gesetzt, wenn die Station selbst Min/Max-Werte sendet. Der Adapter berechnet KEINE Werte.

Schade. Ernüchternd. Trotzdem Danke für die Info, jetzt weiß ich wenigstens was ich zu tun habe ;-) Möchte da eigentlich nicht ewig dran rum basteln, dass es zum Schluss dann doch eine "holprige" Lösung wird... Daher meine Frage:

Wer kann (welche?) Station empfehlen, die die Min-/Max-Werte mitliefert? Würde dann ggf. auf eine andere Ausseneinheit umsteigen.

Danke schonmal, schönen Rest-Sonntag noch...
LG Stefan.

[Fabio]

@rotamint sagte in Test Adapter ioBroker.sainlogic v0.6.X GitHub/Latest:

Wer kann (welche?) Station empfehlen, die die Min-/Max-Werte mitliefert? Würde dann ggf. auf eine andere Ausseneinheit umsteigen.

Ich habe diese hier zuverlässig im Einsatz: https://www.froggit.de/product_info.php?info=p356_wh4000se-wifi-internet-funk-wetterstation---wunderground--ecowitt--pc-anbindung--auswertungssoftware.html

Grüße
Fabio

[rotamint]

@fa-bio Besten Dank für die Info. Ich habe eben bestellt ;-)

LG Stefan.

[Fabio]

@rotamint dann viel Spaß damit.:+1:
Grüße
Fabio