NEWS
[influxDB] nach Rechnerumzug immer wieder ECONNREFUSED
ioBroker Allgemein
64
Beiträge
6
Kommentatoren
6.1k
Aufrufe
6
Watching
-
@lukas8519 also auch nicht das gleiche Problem!
und zuvor lief alles?
was hast du gemacht?
?
?
?@crunchip
leider Zähle ich mich zu den unwissenden in der ganzen Materie und bin ziemlich aufgeschmissen wenn etwas nicht läuft.Ich habe den Raspberry Pi heruntergefahren und ihn vom Strom getrennt und nach ca. einer halben Stunde wieder angeschlossen und nach dem Hochfahren kam der Fehler bei der Influxdb.
Zuvor lief alles ohne Probleme. -
@crunchip
leider Zähle ich mich zu den unwissenden in der ganzen Materie und bin ziemlich aufgeschmissen wenn etwas nicht läuft.Ich habe den Raspberry Pi heruntergefahren und ihn vom Strom getrennt und nach ca. einer halben Stunde wieder angeschlossen und nach dem Hochfahren kam der Fehler bei der Influxdb.
Zuvor lief alles ohne Probleme.apt policy influxdb systmctl status influxdb -
apt policy influxdb systmctl status influxdb@thomas-braun sagte in [influxDB] nach Rechnerumzug immer wieder ECONNREFUSED:
systmctl status influxdb
pi@raspberrypi:~ $ apt policy influxdb influxdb: Installed: 1.8.9-1 Candidate: 1.8.9-1 Version table: *** 1.8.9-1 500 500 https://repos.influxdata.com/debian stretch/stable armhf Packages 100 /var/lib/dpkg/status 1.6.4-1+deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages pi@raspberrypi:~ $ systmctl status influxdb -bash: systmctl: command not found -
@thomas-braun sagte in [influxDB] nach Rechnerumzug immer wieder ECONNREFUSED:
systmctl status influxdb
pi@raspberrypi:~ $ apt policy influxdb influxdb: Installed: 1.8.9-1 Candidate: 1.8.9-1 Version table: *** 1.8.9-1 500 500 https://repos.influxdata.com/debian stretch/stable armhf Packages 100 /var/lib/dpkg/status 1.6.4-1+deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages pi@raspberrypi:~ $ systmctl status influxdb -bash: systmctl: command not found@lukas8519
Sorrysystemctl status influxdbFur influx ist das falsche Repo aktiv. Stretch ist falsch
-
@lukas8519
Sorrysystemctl status influxdbFur influx ist das falsche Repo aktiv. Stretch ist falsch
pi@raspberrypi:~ $ systemctl status influxdb ● influxdb.service - InfluxDB is an open-source, distributed, time series databa Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: Active: activating (start) since Sun 2021-11-21 21:59:59 CET; 3s ago Docs: https://docs.influxdata.com/influxdb/ Cntrl PID: 31988 (influxd-systemd) Tasks: 13 (limit: 4915) CGroup: /system.slice/influxdb.service ├─31988 /bin/bash -e /usr/lib/influxdb/scripts/influxd-systemd-start. ├─31989 /usr/bin/influxd -config /etc/influxdb/influxdb.conf └─32040 sleep 1 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 lines 1-21/21 (END) -
pi@raspberrypi:~ $ systemctl status influxdb ● influxdb.service - InfluxDB is an open-source, distributed, time series databa Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: Active: activating (start) since Sun 2021-11-21 21:59:59 CET; 3s ago Docs: https://docs.influxdata.com/influxdb/ Cntrl PID: 31988 (influxd-systemd) Tasks: 13 (limit: 4915) CGroup: /system.slice/influxdb.service ├─31988 /bin/bash -e /usr/lib/influxdb/scripts/influxd-systemd-start. ├─31989 /usr/bin/influxd -config /etc/influxdb/influxdb.conf └─32040 sleep 1 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 lines 1-21/21 (END)Erstmal deine Installationsquellen korrigieren.
-
pi@raspberrypi:~ $ systemctl status influxdb ● influxdb.service - InfluxDB is an open-source, distributed, time series databa Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: Active: activating (start) since Sun 2021-11-21 21:59:59 CET; 3s ago Docs: https://docs.influxdata.com/influxdb/ Cntrl PID: 31988 (influxd-systemd) Tasks: 13 (limit: 4915) CGroup: /system.slice/influxdb.service ├─31988 /bin/bash -e /usr/lib/influxdb/scripts/influxd-systemd-start. ├─31989 /usr/bin/influxd -config /etc/influxdb/influxdb.conf └─32040 sleep 1 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 Nov 21 21:59:59 raspberrypi influxd-systemd-start.sh[31988]: ts=2021-11-21T20:59 lines 1-21/21 (END)@lukas8519 sagte in [influxDB] nach Rechnerumzug immer wieder ECONNREFUSED:
activating
aktiviert läuft aber nicht
-
@lukas8519
Sorrysystemctl status influxdbFur influx ist das falsche Repo aktiv. Stretch ist falsch
-
Fur influx ist das falsche Repo aktiv. Stretch ist falsch
Erstmal deine Installationsquellen korrigieren.
klingt gut! Leider weiß ich nicht wie ...
https://repos.influxdata.com/debian stretch/stableDa muss buster statt stretch rein.
Dürfte in der /etc/apt/sources.list.d/influxdb.list drin stehen. -
https://repos.influxdata.com/debian stretch/stableDa muss buster statt stretch rein.
Dürfte in der /etc/apt/sources.list.d/influxdb.list drin stehen.pi@raspberrypi:~ $ https://repos.influxdata.com/debian stretch/stable -bash: https://repos.influxdata.com/debian: No such file or directory -
Fur influx ist das falsche Repo aktiv. Stretch ist falsch
Erstmal deine Installationsquellen korrigieren.
klingt gut! Leider weiß ich nicht wie ...
@lukas8519 deine sources.list anpassen
machs sowget -qO- https://repos.influxdata.com/influxdb.key | sudo apt-key add - source /etc/os-release echo "deb https://repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list -
@lukas8519 deine sources.list anpassen
machs sowget -qO- https://repos.influxdata.com/influxdb.key | sudo apt-key add - source /etc/os-release echo "deb https://repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.listpi@raspberrypi:~ $ wget -qO- https://repos.influxdata.com/influxdb.key | sudo apt-key add - OK pi@raspberrypi:~ $ source /etc/os-release pi@raspberrypi:~ $ echo "deb https://repos.influxdata.com/buster $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list deb https://repos.influxdata.com/buster buster stable -
pi@raspberrypi:~ $ wget -qO- https://repos.influxdata.com/influxdb.key | sudo apt-key add - OK pi@raspberrypi:~ $ source /etc/os-release pi@raspberrypi:~ $ echo "deb https://repos.influxdata.com/buster $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list deb https://repos.influxdata.com/buster buster stablesudo apt update sudo apt install --reinstall influxdb -
sudo apt update sudo apt install --reinstall influxdb@thomas-braun
habe ich:pi@raspberrypi:~ $ sudo apt update Get:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] Get:2 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB] Get:3 https://packages.grafana.com/oss/deb stable InRelease [12.1 kB] Get:4 https://deb.nodesource.com/node_12.x buster InRelease [4,584 B] Ign:5 https://repos.influxdata.com/buster buster InRelease Get:6 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13.0 MB] Err:7 https://repos.influxdata.com/buster buster Release 404 Not Found [IP: 2600:9000:224a:fa00:7:7790:e740:93a1 443] Get:8 http://archive.raspberrypi.org/debian buster/main armhf Packages [393 kB] Get:9 https://packages.grafana.com/oss/deb stable/main armhf Packages [29.8 kB] Get:10 http://raspbian.raspberrypi.org/raspbian buster/contrib armhf Packages [58.8 kB] Get:11 http://raspbian.raspberrypi.org/raspbian buster/non-free armhf Packages [104 kB] Get:12 https://deb.nodesource.com/node_12.x buster/main armhf Packages [777 B] Reading package lists... Done E: The repository 'https://repos.influxdata.com/buster buster Release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. N: Repository 'http://archive.raspberrypi.org/debian buster InRelease' changed its 'Suite' value from 'testing' to 'oldstable' pi@raspberrypi:~ $ sudo apt install --reinstall influxdb Reading package lists... Done Building dependency tree Reading state information... Done Reinstallation of influxdb is not possible, it cannot be downloaded. 0 upgraded, 0 newly installed, 0 to remove and 88 not upgraded. pi@raspberrypi:~ $ -
@thomas-braun
habe ich:pi@raspberrypi:~ $ sudo apt update Get:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] Get:2 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB] Get:3 https://packages.grafana.com/oss/deb stable InRelease [12.1 kB] Get:4 https://deb.nodesource.com/node_12.x buster InRelease [4,584 B] Ign:5 https://repos.influxdata.com/buster buster InRelease Get:6 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13.0 MB] Err:7 https://repos.influxdata.com/buster buster Release 404 Not Found [IP: 2600:9000:224a:fa00:7:7790:e740:93a1 443] Get:8 http://archive.raspberrypi.org/debian buster/main armhf Packages [393 kB] Get:9 https://packages.grafana.com/oss/deb stable/main armhf Packages [29.8 kB] Get:10 http://raspbian.raspberrypi.org/raspbian buster/contrib armhf Packages [58.8 kB] Get:11 http://raspbian.raspberrypi.org/raspbian buster/non-free armhf Packages [104 kB] Get:12 https://deb.nodesource.com/node_12.x buster/main armhf Packages [777 B] Reading package lists... Done E: The repository 'https://repos.influxdata.com/buster buster Release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. N: Repository 'http://archive.raspberrypi.org/debian buster InRelease' changed its 'Suite' value from 'testing' to 'oldstable' pi@raspberrypi:~ $ sudo apt install --reinstall influxdb Reading package lists... Done Building dependency tree Reading state information... Done Reinstallation of influxdb is not possible, it cannot be downloaded. 0 upgraded, 0 newly installed, 0 to remove and 88 not upgraded. pi@raspberrypi:~ $@lukas8519
Die /etc/apt/sources.list.d/influxdb.list ist noch falsch.
Zeig mal was da jetzt drin steht.cat /etc/apt/sources.list.d/influxdb.list -
pi@raspberrypi:~ $ cat /etc/apt/sources.list.d/influxdb.list deb https://repos.influxdata.com/buster buster stable@lukas8519
Ersetze das erste buster durch debian -
@lukas8519
Ersetze das erste buster durch debianehm... so war das nicht gemeint oder?
pi@raspberrypi:~ $ cat /etc/apt/sources.list.d/influxdb.list deb https://repos.influxdata.com/buster buster stable pi@raspberrypi:~ $ deb https://repos.influxdata.com/debian -bash: deb: command not found -
ehm... so war das nicht gemeint oder?
pi@raspberrypi:~ $ cat /etc/apt/sources.list.d/influxdb.list deb https://repos.influxdata.com/buster buster stable pi@raspberrypi:~ $ deb https://repos.influxdata.com/debian -bash: deb: command not found@lukas8519
?
Mit einem Editor wie z.B. nano macht man dasnano /etc/apt/sources.list.d/influxdb.list -
@lukas8519
?
Mit einem Editor wie z.B. nano macht man dasnano /etc/apt/sources.list.d/influxdb.list@thomas-braun
sorry ich kenne mich wirklich kaum aus und bin sehr dankbar für eure Hilfe!File Name to Write: /etc/apt/sources.list.d/influxdb.list ^G Get Help M-D DOS Format M-A Append M-B Backup File ^C Cancel M-M Mac Format M-P Prepend ^T To Fileshabe es geändet. Speiche ich das?
361
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge