NEWS
Z-wave2 mit iobroker verbinden (im Netzwerk)
Hardware
44
Beiträge
5
Kommentatoren
3.1k
Aufrufe
3
Watching
-
@arteck said in Z-wave2 mit iobroker verbinden (im Netzwerk):
ls -l /dev/serial/by-id
@arteck said in Z-wave2 mit iobroker verbinden (im Netzwerk):
ls -l /dev/serial/by-id
iobroker@iobroker-pi:~ $ ls -l /dev/serial/by-id
ls: cannot access '/dev/serial/by-id': No such file or directoryklappt nicht
ls -ltr/dev bringt u.a. folgendes
crw-rw---- 1 root dialout 204, 64 Jul 31 09:15 ttyAMA0 -
@rhartmann76 dann hast du ein rechte problem würde ich behaupten..
mach mal
sudo -H -u iobroker ls -l /dev/serial/by-idwenn das nicht geht dann
sudo ls -l /dev/serial/by-id -
@rhartmann76 dann hast du ein rechte problem würde ich behaupten..
mach mal
sudo -H -u iobroker ls -l /dev/serial/by-idwenn das nicht geht dann
sudo ls -l /dev/serial/by-id@arteck said in Z-wave2 mit iobroker verbinden (im Netzwerk):
sudo ls -l /dev/serial/by-id
leider wieder die Fehlermeldungen
iobroker@iobroker-pi:~ $ sudo -H -u iobroker ls -l /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directory iobroker@iobroker-pi:~ $ sudo ls -l /dev/serial/by-id [sudo] password for iobroker: ls: cannot access '/dev/serial/by-id': No such file or directoryiobroker@iobroker-pi:/dev $ ls -ltr /dev total 0 drwxrwxrwt 2 root root 40 Jan 1 1970 mqueue drwxr-xr-x 2 root root 60 Jan 1 1970 raw drwxr-xr-x 2 root root 80 Jan 1 1970 dma_heap drwxr-xr-x 2 root root 60 Jan 1 1970 input drwxr-xr-x 3 root root 60 Jan 1 1970 bus drwxrwxrwt 2 root root 40 Feb 14 2019 shm drwxr-xr-x 2 root root 0 Feb 14 2019 pts lrwxrwxrwx 1 root root 15 Feb 14 2019 stdout -> /proc/self/fd/1 lrwxrwxrwx 1 root root 15 Feb 14 2019 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 Feb 14 2019 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 13 Feb 14 2019 fd -> /proc/self/fd lrwxrwxrwx 1 root root 28 Feb 14 2019 log -> /run/systemd/journal/dev-log lrwxrwxrwx 1 root root 12 Feb 14 2019 initctl -> /run/initctl crw------- 1 root root 10, 137 Jul 31 09:15 vhci crw------- 1 root root 10, 223 Jul 31 09:15 uinput crw------- 1 root root 10, 239 Jul 31 09:15 uhid crw------- 1 root root 108, 0 Jul 31 09:15 ppp drwxr-xr-x 2 root root 60 Jul 31 09:15 net drwxr-xr-x 2 root root 60 Jul 31 09:15 mapper crw------- 1 root root 10, 203 Jul 31 09:15 cuse crw------- 1 root root 10, 234 Jul 31 09:15 btrfs-control crw-rw-rw- 1 root root 10, 229 Jul 31 09:15 fuse crw------- 1 root root 250, 0 Jul 31 09:15 watchdog0 crw------- 1 root root 10, 130 Jul 31 09:15 watchdog crw-rw---- 1 root video 243, 0 Jul 31 09:15 vchiq crw-rw---- 1 root gpio 254, 1 Jul 31 09:15 gpiochip1 lrwxrwxrwx 1 root root 7 Jul 31 09:15 serial1 -> ttyAMA0 brw-rw---- 1 root disk 179, 0 Jul 31 09:15 mmcblk0 crw-rw---- 1 root dialout 4, 64 Jul 31 09:15 ttyS0 lrwxrwxrwx 1 root root 5 Jul 31 09:15 serial0 -> ttyS0 crw-rw---- 1 root video 29, 0 Jul 31 09:15 fb0 brw-rw---- 1 root disk 179, 2 Jul 31 09:15 mmcblk0p2 crw-rw---- 1 root gpio 254, 0 Jul 31 09:15 gpiochip0 drwxr-xr-x 7 root root 140 Jul 31 09:15 disk crw-rw---- 1 root video 247, 0 Jul 31 09:15 vcio crw-rw---- 1 root gpio 246, 0 Jul 31 09:15 gpiomem brw-rw---- 1 root disk 7, 0 Jul 31 09:15 loop0 brw-rw---- 1 root disk 7, 2 Jul 31 09:15 loop2 brw-rw---- 1 root disk 7, 1 Jul 31 09:15 loop1 brw-rw---- 1 root disk 7, 4 Jul 31 09:15 loop4 brw-rw---- 1 root disk 7, 3 Jul 31 09:15 loop3 brw-rw---- 1 root disk 1, 1 Jul 31 09:15 ram1 brw-rw---- 1 root disk 1, 0 Jul 31 09:15 ram0 brw-rw---- 1 root disk 7, 7 Jul 31 09:15 loop7 brw-rw---- 1 root disk 7, 6 Jul 31 09:15 loop6 brw-rw---- 1 root disk 7, 5 Jul 31 09:15 loop5 brw-rw---- 1 root disk 1, 10 Jul 31 09:15 ram10 brw-rw---- 1 root disk 1, 12 Jul 31 09:15 ram12 brw-rw---- 1 root disk 1, 11 Jul 31 09:15 ram11 brw-rw---- 1 root disk 1, 15 Jul 31 09:15 ram15 brw-rw---- 1 root disk 1, 14 Jul 31 09:15 ram14 brw-rw---- 1 root disk 1, 13 Jul 31 09:15 ram13 brw-rw---- 1 root disk 1, 2 Jul 31 09:15 ram2 brw-rw---- 1 root disk 1, 4 Jul 31 09:15 ram4 crw-rw---- 1 root gpio 254, 2 Jul 31 09:15 gpiochip2 brw-rw---- 1 root disk 1, 9 Jul 31 09:15 ram9 brw-rw---- 1 root disk 1, 7 Jul 31 09:15 ram7 brw-rw---- 1 root disk 1, 6 Jul 31 09:15 ram6 brw-rw---- 1 root disk 1, 5 Jul 31 09:15 ram5 brw-rw---- 1 root disk 1, 8 Jul 31 09:15 ram8 brw-rw---- 1 root disk 1, 3 Jul 31 09:15 ram3 crw-rw-rw- 1 root root 1, 7 Jul 31 09:15 full drwxr-xr-x 2 root root 580 Jul 31 09:15 block crw-rw-rw- 1 root root 1, 3 Jul 31 09:15 null crw-rw-rw- 1 root root 1, 9 Jul 31 09:15 urandom crw-rw-rw- 1 root root 1, 5 Jul 31 09:15 zero crw-rw-rw- 1 root root 1, 8 Jul 31 09:15 random crw-r----- 1 root kmem 1, 1 Jul 31 09:15 mem crw-r--r-- 1 root root 1, 11 Jul 31 09:15 kmsg crw------- 1 root root 10, 63 Jul 31 09:15 cachefiles crw-rw---- 1 root disk 10, 237 Jul 31 09:15 loop-control crw------- 1 root root 10, 183 Jul 31 09:15 hwrng crw-r--r-- 1 root root 10, 235 Jul 31 09:15 autofs crw--w---- 1 root tty 4, 11 Jul 31 09:15 tty11 crw--w---- 1 root tty 4, 10 Jul 31 09:15 tty10 crw--w---- 1 root tty 4, 13 Jul 31 09:15 tty13 crw--w---- 1 root tty 4, 12 Jul 31 09:15 tty12 crw--w---- 1 root tty 4, 0 Jul 31 09:15 tty0 crw--w---- 1 root tty 4, 2 Jul 31 09:15 tty2 crw--w---- 1 root tty 4, 19 Jul 31 09:15 tty19 crw--w---- 1 root tty 4, 18 Jul 31 09:15 tty18 crw--w---- 1 root tty 4, 17 Jul 31 09:15 tty17 crw--w---- 1 root tty 4, 16 Jul 31 09:15 tty16 crw--w---- 1 root tty 4, 14 Jul 31 09:15 tty14 crw--w---- 1 root tty 4, 24 Jul 31 09:15 tty24 crw--w---- 1 root tty 4, 23 Jul 31 09:15 tty23 crw--w---- 1 root tty 4, 22 Jul 31 09:15 tty22 crw--w---- 1 root tty 4, 21 Jul 31 09:15 tty21 crw--w---- 1 root tty 4, 20 Jul 31 09:15 tty20 crw--w---- 1 root tty 4, 15 Jul 31 09:15 tty15 crw--w---- 1 root tty 4, 25 Jul 31 09:15 tty25 crw--w---- 1 root tty 4, 32 Jul 31 09:15 tty32 crw--w---- 1 root tty 4, 30 Jul 31 09:15 tty30 crw--w---- 1 root tty 4, 3 Jul 31 09:15 tty3 crw--w---- 1 root tty 4, 29 Jul 31 09:15 tty29 crw--w---- 1 root tty 4, 35 Jul 31 09:15 tty35 crw--w---- 1 root tty 4, 34 Jul 31 09:15 tty34 crw--w---- 1 root tty 4, 33 Jul 31 09:15 tty33 crw--w---- 1 root tty 4, 31 Jul 31 09:15 tty31 crw--w---- 1 root tty 4, 28 Jul 31 09:15 tty28 crw--w---- 1 root tty 4, 27 Jul 31 09:15 tty27 crw--w---- 1 root tty 4, 26 Jul 31 09:15 tty26 crw--w---- 1 root tty 4, 40 Jul 31 09:15 tty40 crw--w---- 1 root tty 4, 4 Jul 31 09:15 tty4 crw--w---- 1 root tty 4, 36 Jul 31 09:15 tty36 crw--w---- 1 root tty 4, 43 Jul 31 09:15 tty43 crw--w---- 1 root tty 4, 41 Jul 31 09:15 tty41 crw--w---- 1 root tty 4, 39 Jul 31 09:15 tty39 crw--w---- 1 root tty 4, 38 Jul 31 09:15 tty38 crw--w---- 1 root tty 4, 37 Jul 31 09:15 tty37 crw--w---- 1 root tty 4, 5 Jul 31 09:15 tty5 crw--w---- 1 root tty 4, 48 Jul 31 09:15 tty48 crw--w---- 1 root tty 4, 45 Jul 31 09:15 tty45 crw--w---- 1 root tty 4, 44 Jul 31 09:15 tty44 crw--w---- 1 root tty 4, 42 Jul 31 09:15 tty42 crw--w---- 1 root tty 4, 51 Jul 31 09:15 tty51 crw--w---- 1 root tty 4, 50 Jul 31 09:15 tty50 crw--w---- 1 root tty 4, 49 Jul 31 09:15 tty49 crw--w---- 1 root tty 4, 47 Jul 31 09:15 tty47 crw--w---- 1 root tty 4, 46 Jul 31 09:15 tty46 crw--w---- 1 root tty 4, 60 Jul 31 09:15 tty60 crw--w---- 1 root tty 4, 6 Jul 31 09:15 tty6 crw--w---- 1 root tty 4, 59 Jul 31 09:15 tty59 crw--w---- 1 root tty 4, 58 Jul 31 09:15 tty58 crw--w---- 1 root tty 4, 56 Jul 31 09:15 tty56 crw--w---- 1 root tty 4, 54 Jul 31 09:15 tty54 crw--w---- 1 root tty 4, 9 Jul 31 09:15 tty9 crw--w---- 1 root tty 4, 7 Jul 31 09:15 tty7 crw--w---- 1 root tty 4, 63 Jul 31 09:15 tty63 crw--w---- 1 root tty 4, 62 Jul 31 09:15 tty62 crw--w---- 1 root tty 4, 61 Jul 31 09:15 tty61 crw--w---- 1 root tty 4, 57 Jul 31 09:15 tty57 crw--w---- 1 root tty 4, 55 Jul 31 09:15 tty55 crw--w---- 1 root tty 4, 53 Jul 31 09:15 tty53 crw--w---- 1 root tty 4, 52 Jul 31 09:15 tty52 crw-rw---- 1 root tty 7, 3 Jul 31 09:15 vcs3 crw-rw---- 1 root tty 7, 1 Jul 31 09:15 vcs1 crw-rw---- 1 root tty 7, 0 Jul 31 09:15 vcs crw------- 1 root root 248, 0 Jul 31 09:15 vc-mem crw------- 1 root root 5, 3 Jul 31 09:15 ttyprintk crw--w---- 1 root tty 4, 8 Jul 31 09:15 tty8 crw-rw---- 1 root tty 7, 130 Jul 31 09:15 vcsa2 crw-rw---- 1 root tty 7, 129 Jul 31 09:15 vcsa1 crw-rw---- 1 root tty 7, 5 Jul 31 09:15 vcs5 crw-rw---- 1 root tty 7, 4 Jul 31 09:15 vcs4 crw-rw---- 1 root tty 7, 2 Jul 31 09:15 vcs2 crw-rw---- 1 root tty 7, 66 Jul 31 09:15 vcsu2 crw-rw---- 1 root tty 7, 64 Jul 31 09:15 vcsu crw-rw---- 1 root tty 7, 134 Jul 31 09:15 vcsa6 crw-rw---- 1 root tty 7, 70 Jul 31 09:15 vcsu6 crw-rw---- 1 root tty 7, 69 Jul 31 09:15 vcsu5 crw-rw---- 1 root tty 7, 133 Jul 31 09:15 vcsa5 crw-rw---- 1 root tty 7, 68 Jul 31 09:15 vcsu4 crw-rw---- 1 root tty 7, 67 Jul 31 09:15 vcsu3 crw-rw---- 1 root tty 7, 131 Jul 31 09:15 vcsa3 crw-rw---- 1 root tty 7, 6 Jul 31 09:15 vcs6 crw-rw---- 1 root tty 7, 132 Jul 31 09:15 vcsa4 crw-rw---- 1 root tty 7, 65 Jul 31 09:15 vcsu1 crw-rw---- 1 root tty 7, 128 Jul 31 09:15 vcsa drwxr-xr-x 3 root root 140 Jul 31 09:15 snd crw-rw-r-- 1 root netdev 10, 242 Jul 31 09:15 rfkill drwxr-xr-x 2 root root 2500 Jul 31 09:15 char brw-rw---- 1 root disk 179, 1 Jul 31 09:15 mmcblk0p1 crwxrwxrwx 1 root dialout 204, 64 Jul 31 09:15 ttyAMA0 crw--w---- 1 root tty 4, 1 Jul 31 09:15 tty1 crw------- 1 root root 5, 1 Jul 31 09:16 console crw-rw-rw- 1 root tty 5, 0 Aug 2 07:18 tty crw-rw-rw- 1 root tty 5, 2 Aug 2 07:23 ptmx -
iobroker@iobroker-pi
Wieso bist du überhaupt als
iobrokerangemeldet? Der User wird normalerweise von ioBroker angelegt und hat gar keine Login-Shell. Ohne Details zu kennen, würde ich behaupten, du hast irgendwie komisch installiert. -
iobroker@iobroker-pi
Wieso bist du überhaupt als
iobrokerangemeldet? Der User wird normalerweise von ioBroker angelegt und hat gar keine Login-Shell. Ohne Details zu kennen, würde ich behaupten, du hast irgendwie komisch installiert.@alcalzone Danke, ich habe das iobroker Raspberry image installiert. Dies sollte doch passen!?
Grüße
-
@alcalzone Danke, ich habe das iobroker Raspberry image installiert. Dies sollte doch passen!?
Grüße
Welches Image?
Und warum überhaupt ein Image?
Man sollte eh immer von Hand installieren.Üblicherweise haben die Images den Standarduser 'pi' aktiv.
-
Scheint das von der Homepage zu sein.
https://www.iobroker.net/#de/download bzw. https://forum.iobroker.net/topic/41520/test-image-raspberry-pi-os-v1-0-0Also offiziell endorsed.
@andre hast du ne Idee, warum
/dev/serial/by-idfehlt?Warum `sudo` böse ist: https://forum.iobroker.net/post/17109
-
Scheint das von der Homepage zu sein.
https://www.iobroker.net/#de/download bzw. https://forum.iobroker.net/topic/41520/test-image-raspberry-pi-os-v1-0-0Also offiziell endorsed.
@andre hast du ne Idee, warum
/dev/serial/by-idfehlt?@alcalzone ja, genau das ist es.
Für "normal-User" ist sowas nun mal ganz gut. "Wir" wollen nun mal nicht immer auf Code-Ebene unterwegs sein ;-)
Danke Euch
-
Scheint das von der Homepage zu sein.
https://www.iobroker.net/#de/download bzw. https://forum.iobroker.net/topic/41520/test-image-raspberry-pi-os-v1-0-0Also offiziell endorsed.
@andre hast du ne Idee, warum
/dev/serial/by-idfehlt?@alcalzone Da gibt es den user iobroker aber auch nicht (mehr?)...
-
@alcalzone Da gibt es den user iobroker aber auch nicht (mehr?)...
nochmal alles manuell installiert. Trotzdem bekomme ich diese Meldungen....
pi@raspberrypi:~ $ ls -l /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directory pi@raspberrypi:~ $ ls -l /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directory pi@raspberrypi:~ $ sudo -H -u iobroker ls -l /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directory pi@raspberrypi:~ $ sudo ls -l /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directory pi@raspberrypi:~ $ -
@rhartmann76
Stick raus, nach einer kurzen Bedenkzeit wieder rein,dmesg -Taufrufen, am Ende müsste dann etwas zu dem Stick stehen .
-
@rhartmann76
Stick raus, nach einer kurzen Bedenkzeit wieder rein,dmesg -Taufrufen, am Ende müsste dann etwas zu dem Stick stehen .
ist kein Stick, ist die Platine auf den Pi 3. Trotzdem runter nehmen?
-
ist kein Stick, ist die Platine auf den Pi 3. Trotzdem runter nehmen?
@rhartmann76 Oh, sorry. Nee, dann läuft das anders.
Der serial Bus ist aktiv bei dem Raspberry? Kann man ggf. unter
sudo raspi-configirgendwo einstellen.
-
Hab gerade mal geschaut. Bei mir gibts den Pfad
/dev/serial/by-idauch nicht. Unter/dev/serial0(Raspberry 4) bzw./dev/ttyAMA0(Raspberry 3) erreiche ich das Gerät dennoch.@alcalzone ich kann doch nicht so doof sein - aber scheinbar mache ich was falsch.
-
@alcalzone ich kann doch nicht so doof sein - aber scheinbar mache ich was falsch.
-
@rhartmann76
Stick raus, nach einer kurzen Bedenkzeit wieder rein,dmesg -Taufrufen, am Ende müsste dann etwas zu dem Stick stehen .
@thomas-braun said in Z-wave2 mit iobroker verbinden (im Netzwerk):
dmesg -T
pi@raspberrypi:~ $ dmesg -T [Mon Aug 2 13:53:51 2021] Booting Linux on physical CPU 0x0 [Mon Aug 2 13:53:51 2021] Linux version 5.10.17-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1414 SMP Fri Apr 30 13:18:35 BST 2021 [Mon Aug 2 13:53:51 2021] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [Mon Aug 2 13:53:51 2021] CPU: div instructions available: patching division code [Mon Aug 2 13:53:51 2021] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [Mon Aug 2 13:53:51 2021] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [Mon Aug 2 13:53:51 2021] Memory policy: Data cache writealloc [Mon Aug 2 13:53:51 2021] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB [Mon Aug 2 13:53:51 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Mon Aug 2 13:53:51 2021] Zone ranges: [Mon Aug 2 13:53:51 2021] DMA [mem 0x0000000000000000-0x000000003b3fffff] [Mon Aug 2 13:53:51 2021] Normal empty [Mon Aug 2 13:53:51 2021] Movable zone start for each node [Mon Aug 2 13:53:51 2021] Early memory node ranges [Mon Aug 2 13:53:51 2021] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [Mon Aug 2 13:53:51 2021] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [Mon Aug 2 13:53:51 2021] On node 0 totalpages: 242688 [Mon Aug 2 13:53:51 2021] DMA zone: 2133 pages used for memmap [Mon Aug 2 13:53:51 2021] DMA zone: 0 pages reserved [Mon Aug 2 13:53:51 2021] DMA zone: 242688 pages, LIFO batch:63 [Mon Aug 2 13:53:51 2021] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [Mon Aug 2 13:53:51 2021] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [Mon Aug 2 13:53:51 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Mon Aug 2 13:53:51 2021] Built 1 zonelists, mobility grouping on. Total pages: 240555 [Mon Aug 2 13:53:51 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6f760246-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Mon Aug 2 13:53:51 2021] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [Mon Aug 2 13:53:51 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Mon Aug 2 13:53:51 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Mon Aug 2 13:53:51 2021] mem auto-init: stack:off, heap alloc:off, heap free:off [Mon Aug 2 13:53:51 2021] Memory: 879832K/970752K available (9216K kernel code, 1311K rwdata, 2940K rodata, 1024K init, 860K bss, 25384K reserved, 65536K cma-reserved) [Mon Aug 2 13:53:51 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Mon Aug 2 13:53:51 2021] ftrace: allocating 31910 entries in 63 pages [Mon Aug 2 13:53:51 2021] ftrace: allocated 63 pages with 6 groups [Mon Aug 2 13:53:51 2021] rcu: Hierarchical RCU implementation. [Mon Aug 2 13:53:51 2021] Rude variant of Tasks RCU enabled. [Mon Aug 2 13:53:51 2021] Tracing variant of Tasks RCU enabled. [Mon Aug 2 13:53:51 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Mon Aug 2 13:53:51 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Mon Aug 2 13:53:51 2021] random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=0 [Mon Aug 2 13:53:51 2021] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [Mon Aug 2 13:53:51 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [Mon Aug 2 13:53:51 2021] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [Mon Aug 2 13:53:51 2021] Switching to timer-based delay loop, resolution 52ns [Mon Aug 2 13:53:51 2021] Console: colour dummy device 80x30 [Mon Aug 2 13:53:51 2021] printk: console [tty1] enabled [Mon Aug 2 13:53:51 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [Mon Aug 2 13:53:51 2021] pid_max: default: 32768 minimum: 301 [Mon Aug 2 13:53:51 2021] LSM: Security Framework initializing [Mon Aug 2 13:53:51 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Mon Aug 2 13:53:51 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Mon Aug 2 13:53:51 2021] Disabling memory control group subsystem [Mon Aug 2 13:53:51 2021] CPU: Testing write buffer coherency: ok [Mon Aug 2 13:53:51 2021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Mon Aug 2 13:53:51 2021] Setting up static identity map for 0x100000 - 0x10003c [Mon Aug 2 13:53:51 2021] rcu: Hierarchical SRCU implementation. [Mon Aug 2 13:53:51 2021] smp: Bringing up secondary CPUs ... [Mon Aug 2 13:53:51 2021] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Mon Aug 2 13:53:51 2021] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Mon Aug 2 13:53:51 2021] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Mon Aug 2 13:53:51 2021] smp: Brought up 1 node, 4 CPUs [Mon Aug 2 13:53:51 2021] SMP: Total of 4 processors activated (153.60 BogoMIPS). [Mon Aug 2 13:53:51 2021] CPU: All CPU(s) started in HYP mode. [Mon Aug 2 13:53:51 2021] CPU: Virtualization extensions available. [Mon Aug 2 13:53:51 2021] devtmpfs: initialized [Mon Aug 2 13:53:51 2021] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [Mon Aug 2 13:53:51 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Mon Aug 2 13:53:51 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Mon Aug 2 13:53:51 2021] pinctrl core: initialized pinctrl subsystem [Mon Aug 2 13:53:51 2021] NET: Registered protocol family 16 [Mon Aug 2 13:53:51 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations [Mon Aug 2 13:53:51 2021] audit: initializing netlink subsys (disabled) [Mon Aug 2 13:53:51 2021] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [Mon Aug 2 13:53:51 2021] thermal_sys: Registered thermal governor 'step_wise' [Mon Aug 2 13:53:51 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Mon Aug 2 13:53:51 2021] hw-breakpoint: maximum watchpoint size is 8 bytes. [Mon Aug 2 13:53:51 2021] Serial: AMBA PL011 UART driver [Mon Aug 2 13:53:51 2021] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [Mon Aug 2 13:53:51 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T13:47:07, variant start [Mon Aug 2 13:53:51 2021] raspberrypi-firmware soc:firmware: Firmware hash is d7f29d96450abfc77cd6cf011af1faf1e03e5e56 [Mon Aug 2 13:53:51 2021] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [Mon Aug 2 13:53:51 2021] SCSI subsystem initialized [Mon Aug 2 13:53:51 2021] usbcore: registered new interface driver usbfs [Mon Aug 2 13:53:51 2021] usbcore: registered new interface driver hub [Mon Aug 2 13:53:51 2021] usbcore: registered new device driver usb [Mon Aug 2 13:53:51 2021] clocksource: Switched to clocksource arch_sys_counter [Mon Aug 2 13:53:52 2021] VFS: Disk quotas dquot_6.6.0 [Mon Aug 2 13:53:52 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Mon Aug 2 13:53:52 2021] FS-Cache: Loaded [Mon Aug 2 13:53:52 2021] CacheFiles: Loaded [Mon Aug 2 13:53:52 2021] NET: Registered protocol family 2 [Mon Aug 2 13:53:52 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Mon Aug 2 13:53:52 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Mon Aug 2 13:53:52 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Mon Aug 2 13:53:52 2021] TCP: Hash tables configured (established 8192 bind 8192) [Mon Aug 2 13:53:52 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Mon Aug 2 13:53:52 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Mon Aug 2 13:53:52 2021] NET: Registered protocol family 1 [Mon Aug 2 13:53:52 2021] RPC: Registered named UNIX socket transport module. [Mon Aug 2 13:53:52 2021] RPC: Registered udp transport module. [Mon Aug 2 13:53:52 2021] RPC: Registered tcp transport module. [Mon Aug 2 13:53:52 2021] RPC: Registered tcp NFSv4.1 backchannel transport module. [Mon Aug 2 13:53:52 2021] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [Mon Aug 2 13:53:52 2021] Initialise system trusted keyrings [Mon Aug 2 13:53:52 2021] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [Mon Aug 2 13:53:52 2021] zbud: loaded [Mon Aug 2 13:53:52 2021] FS-Cache: Netfs 'nfs' registered for caching [Mon Aug 2 13:53:52 2021] NFS: Registering the id_resolver key type [Mon Aug 2 13:53:52 2021] Key type id_resolver registered [Mon Aug 2 13:53:52 2021] Key type id_legacy registered [Mon Aug 2 13:53:52 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Mon Aug 2 13:53:52 2021] Key type asymmetric registered [Mon Aug 2 13:53:52 2021] Asymmetric key parser 'x509' registered [Mon Aug 2 13:53:52 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Mon Aug 2 13:53:52 2021] io scheduler mq-deadline registered [Mon Aug 2 13:53:52 2021] io scheduler kyber registered [Mon Aug 2 13:53:52 2021] bcm2708_fb soc:fb: FB found 1 display(s) [Mon Aug 2 13:53:52 2021] Console: switching to colour frame buffer device 82x26 [Mon Aug 2 13:53:52 2021] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [Mon Aug 2 13:53:52 2021] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [Mon Aug 2 13:53:52 2021] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default [Mon Aug 2 13:53:52 2021] bcm2835-rng 3f104000.rng: hwrng registered [Mon Aug 2 13:53:52 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [Mon Aug 2 13:53:53 2021] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [Mon Aug 2 13:53:53 2021] brd: module loaded [Mon Aug 2 13:53:53 2021] loop: module loaded [Mon Aug 2 13:53:53 2021] Loading iSCSI transport class v2.0-870. [Mon Aug 2 13:53:53 2021] libphy: Fixed MDIO Bus: probed [Mon Aug 2 13:53:53 2021] usbcore: registered new interface driver lan78xx [Mon Aug 2 13:53:53 2021] usbcore: registered new interface driver smsc95xx [Mon Aug 2 13:53:53 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Mon Aug 2 13:53:53 2021] Core Release: 2.80a [Mon Aug 2 13:53:53 2021] Setting default values for core params [Mon Aug 2 13:53:53 2021] Finished setting default values for core params [Mon Aug 2 13:53:53 2021] Using Buffer DMA mode [Mon Aug 2 13:53:53 2021] Periodic Transfer Interrupt Enhancement - disabled [Mon Aug 2 13:53:53 2021] Multiprocessor Interrupt Enhancement - disabled [Mon Aug 2 13:53:54 2021] OTG VER PARAM: 0, OTG VER FLAG: 0 [Mon Aug 2 13:53:54 2021] Dedicated Tx FIFOs mode [Mon Aug 2 13:53:54 2021] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024 [Mon Aug 2 13:53:54 2021] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [Mon Aug 2 13:53:54 2021] dwc_otg: Microframe scheduler enabled [Mon Aug 2 13:53:54 2021] WARN::hcd_init_fiq:457: FIQ on core 1 [Mon Aug 2 13:53:54 2021] WARN::hcd_init_fiq:458: FIQ ASM at 807be568 length 36 [Mon Aug 2 13:53:54 2021] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [Mon Aug 2 13:53:54 2021] dwc_otg 3f980000.usb: DWC OTG Controller [Mon Aug 2 13:53:54 2021] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [Mon Aug 2 13:53:54 2021] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [Mon Aug 2 13:53:54 2021] Init: Port Power? op_state=1 [Mon Aug 2 13:53:54 2021] Init: Power Port (0) [Mon Aug 2 13:53:54 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Mon Aug 2 13:53:54 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Mon Aug 2 13:53:54 2021] usb usb1: Product: DWC OTG Controller [Mon Aug 2 13:53:54 2021] usb usb1: Manufacturer: Linux 5.10.17-v7+ dwc_otg_hcd [Mon Aug 2 13:53:54 2021] usb usb1: SerialNumber: 3f980000.usb [Mon Aug 2 13:53:54 2021] hub 1-0:1.0: USB hub found [Mon Aug 2 13:53:54 2021] hub 1-0:1.0: 1 port detected [Mon Aug 2 13:53:54 2021] dwc_otg: FIQ enabled [Mon Aug 2 13:53:54 2021] dwc_otg: NAK holdoff enabled [Mon Aug 2 13:53:54 2021] dwc_otg: FIQ split-transaction FSM enabled [Mon Aug 2 13:53:54 2021] Module dwc_common_port init [Mon Aug 2 13:53:54 2021] usbcore: registered new interface driver usb-storage [Mon Aug 2 13:53:54 2021] mousedev: PS/2 mouse device common for all mice [Mon Aug 2 13:53:54 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Mon Aug 2 13:53:54 2021] sdhci: Secure Digital Host Controller Interface driver [Mon Aug 2 13:53:54 2021] sdhci: Copyright(c) Pierre Ossman [Mon Aug 2 13:53:54 2021] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [Mon Aug 2 13:53:54 2021] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [Mon Aug 2 13:53:54 2021] sdhci-pltfm: SDHCI platform and OF driver helper [Mon Aug 2 13:53:54 2021] ledtrig-cpu: registered to indicate activity on CPUs [Mon Aug 2 13:53:54 2021] hid: raw HID events driver (C) Jiri Kosina [Mon Aug 2 13:53:54 2021] usbcore: registered new interface driver usbhid [Mon Aug 2 13:53:54 2021] usbhid: USB HID core driver [Mon Aug 2 13:53:54 2021] Initializing XFRM netlink socket [Mon Aug 2 13:53:54 2021] NET: Registered protocol family 17 [Mon Aug 2 13:53:54 2021] Key type dns_resolver registered [Mon Aug 2 13:53:54 2021] Registering SWP/SWPB emulation handler [Mon Aug 2 13:53:54 2021] registered taskstats version 1 [Mon Aug 2 13:53:54 2021] Loading compiled-in X.509 certificates [Mon Aug 2 13:53:54 2021] Key type ._fscrypt registered [Mon Aug 2 13:53:54 2021] Key type .fscrypt registered [Mon Aug 2 13:53:54 2021] Key type fscrypt-provisioning registered [Mon Aug 2 13:53:54 2021] uart-pl011 3f201000.serial: cts_event_workaround enabled [Mon Aug 2 13:53:54 2021] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [Mon Aug 2 13:53:54 2021] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default [Mon Aug 2 13:53:54 2021] printk: console [ttyS0] disabled [Mon Aug 2 13:53:54 2021] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 50000000) is a 16550 [Mon Aug 2 13:53:55 2021] printk: console [ttyS0] enabled [Mon Aug 2 13:53:55 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Mon Aug 2 13:53:55 2021] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Mon Aug 2 13:53:55 2021] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [Mon Aug 2 13:53:55 2021] sdhost: log_buf @ (ptrval) (f7507000) [Mon Aug 2 13:53:55 2021] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Mon Aug 2 13:53:55 2021] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [Mon Aug 2 13:53:55 2021] of_cfs_init [Mon Aug 2 13:53:55 2021] of_cfs_init: OK [Mon Aug 2 13:53:55 2021] Waiting for root device PARTUUID=6f760246-02... [Mon Aug 2 13:53:55 2021] Indeed it is in host mode hprt0 = 00021501 [Mon Aug 2 13:53:55 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Mon Aug 2 13:53:55 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Mon Aug 2 13:53:55 2021] random: fast init done [Mon Aug 2 13:53:55 2021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Mon Aug 2 13:53:55 2021] mmc0: host does not support reading read-only switch, assuming write-enable [Mon Aug 2 13:53:55 2021] mmc0: new high speed SDHC card at address 59b4 [Mon Aug 2 13:53:55 2021] mmcblk0: mmc0:59b4 SD16G 14.6 GiB [Mon Aug 2 13:53:55 2021] mmcblk0: p1 p2 [Mon Aug 2 13:53:55 2021] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Mon Aug 2 13:53:55 2021] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Aug 2 13:53:55 2021] usb 1-1: new high-speed USB device number 2 using dwc_otg [Mon Aug 2 13:53:55 2021] devtmpfs: mounted [Mon Aug 2 13:53:55 2021] Indeed it is in host mode hprt0 = 00001101 [Mon Aug 2 13:53:55 2021] Freeing unused kernel memory: 1024K [Mon Aug 2 13:53:55 2021] mmc1: new high speed SDIO card at address 0001 [Mon Aug 2 13:53:55 2021] Run /sbin/init as init process [Mon Aug 2 13:53:55 2021] with arguments: [Mon Aug 2 13:53:55 2021] /sbin/init [Mon Aug 2 13:53:55 2021] with environment: [Mon Aug 2 13:53:55 2021] HOME=/ [Mon Aug 2 13:53:55 2021] TERM=linux [Mon Aug 2 13:53:55 2021] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [Mon Aug 2 13:53:55 2021] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [Mon Aug 2 13:53:55 2021] hub 1-1:1.0: USB hub found [Mon Aug 2 13:53:55 2021] hub 1-1:1.0: 5 ports detected [Mon Aug 2 13:53:56 2021] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [Mon Aug 2 13:53:56 2021] systemd[1]: System time before build time, advancing clock. [Mon Aug 2 13:53:56 2021] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [Mon Aug 2 13:53:56 2021] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [Mon Aug 2 13:53:56 2021] smsc95xx v2.0.0 [Mon Aug 2 13:53:56 2021] NET: Registered protocol family 10 [Mon Aug 2 13:53:56 2021] Segment Routing with IPv6 [Mon Aug 2 13:53:56 2021] libphy: smsc95xx-mdiobus: probed [Mon Aug 2 13:53:56 2021] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ab:95:46 [Mon Aug 2 13:53:56 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [Mon Aug 2 13:53:56 2021] systemd[1]: Detected architecture arm. [Mon Aug 2 13:53:56 2021] systemd[1]: Set hostname to <raspberrypi>. [Mon Aug 2 13:53:57 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mon Aug 2 13:53:57 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mon Aug 2 13:53:57 2021] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [Mon Aug 2 13:53:57 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mon Aug 2 13:53:57 2021] systemd[1]: Created slice system-systemd\x2dfsck.slice. [Mon Aug 2 13:53:57 2021] systemd[1]: Listening on Journal Socket (/dev/log). [Mon Aug 2 13:53:57 2021] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Mon Aug 2 13:53:57 2021] systemd[1]: Listening on Syslog Socket. [Mon Aug 2 13:53:57 2021] systemd[1]: Listening on udev Kernel Socket. [Mon Aug 2 13:53:57 2021] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Mon Aug 2 13:53:58 2021] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [Mon Aug 2 13:53:58 2021] systemd-journald[104]: Received request to flush runtime journal from PID 1 [Mon Aug 2 13:53:59 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] mc: Linux media interface: v0.10 [Mon Aug 2 13:53:59 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Mon Aug 2 13:53:59 2021] [vc_sm_connected_init]: start [Mon Aug 2 13:53:59 2021] [vc_sm_connected_init]: installed successfully [Mon Aug 2 13:53:59 2021] videodev: Linux video capture interface: v2.00 [Mon Aug 2 13:53:59 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Mon Aug 2 13:53:59 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Mon Aug 2 13:53:59 2021] bcm2835_audio bcm2835_audio: card created with 8 channels [Mon Aug 2 13:53:59 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Mon Aug 2 13:53:59 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Mon Aug 2 13:54:00 2021] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [Mon Aug 2 13:54:00 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [Mon Aug 2 13:54:00 2021] usbcore: registered new interface driver brcmfmac [Mon Aug 2 13:54:00 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2 [Mon Aug 2 13:54:00 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [Mon Aug 2 13:54:00 2021] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [Mon Aug 2 13:54:00 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd [Mon Aug 2 13:54:01 2021] Under-voltage detected! (0x00050000) [Mon Aug 2 13:54:02 2021] random: crng init done [Mon Aug 2 13:54:02 2021] random: 7 urandom warning(s) missed due to ratelimiting [Mon Aug 2 13:54:02 2021] uart-pl011 3f201000.serial: no DMA platform data [Mon Aug 2 13:54:02 2021] 8021q: 802.1Q VLAN Support v1.8 [Mon Aug 2 13:54:03 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [Mon Aug 2 13:54:03 2021] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) [Mon Aug 2 13:54:03 2021] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [Mon Aug 2 13:54:03 2021] smsc95xx 1-1.1:1.0 eth0: Link is Down [Mon Aug 2 13:54:07 2021] Bluetooth: Core ver 2.22 [Mon Aug 2 13:54:07 2021] NET: Registered protocol family 31 [Mon Aug 2 13:54:07 2021] Bluetooth: HCI device and connection manager initialized [Mon Aug 2 13:54:07 2021] Bluetooth: HCI socket layer initialized [Mon Aug 2 13:54:07 2021] Bluetooth: L2CAP socket layer initialized [Mon Aug 2 13:54:07 2021] Bluetooth: SCO socket layer initialized [Mon Aug 2 13:54:07 2021] Bluetooth: HCI UART driver ver 2.3 [Mon Aug 2 13:54:07 2021] Bluetooth: HCI UART protocol H4 registered [Mon Aug 2 13:54:07 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered [Mon Aug 2 13:54:07 2021] Bluetooth: HCI UART protocol Broadcom registered [Mon Aug 2 13:54:07 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Mon Aug 2 13:54:07 2021] Bluetooth: BNEP filters: protocol multicast [Mon Aug 2 13:54:07 2021] Bluetooth: BNEP socket layer initialized [Mon Aug 2 13:54:08 2021] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [Mon Aug 2 13:54:08 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Mon Aug 2 13:54:09 2021] Voltage normalised (0x00000000) [Mon Aug 2 13:54:20 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 13:54:34 2021] Voltage normalised (0x00000000) [Mon Aug 2 13:54:36 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 13:54:43 2021] Voltage normalised (0x00000000) [Mon Aug 2 13:59:24 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 13:59:24 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 13:59:30 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 13:59:30 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:00:09 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:00:13 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:00:47 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:00:53 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:04:58 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:04:58 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:05:03 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:05:03 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:05:44 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:05:48 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:06:34 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:06:45 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:10:15 2021] rpi_firmware_get_throttled: 8 callbacks suppressed [Mon Aug 2 14:10:15 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:10:21 2021] rpi_firmware_get_throttled: 8 callbacks suppressed [Mon Aug 2 14:10:21 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:10:48 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:10:54 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:12:11 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:12:17 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:15:16 2021] rpi_firmware_get_throttled: 6 callbacks suppressed [Mon Aug 2 14:15:16 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:15:22 2021] rpi_firmware_get_throttled: 6 callbacks suppressed [Mon Aug 2 14:15:22 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:15:39 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:15:45 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:16:10 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:16:16 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:20:20 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:20:20 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:20:26 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:20:26 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:20:30 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:20:34 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:20:43 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:20:49 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:25:24 2021] rpi_firmware_get_throttled: 11 callbacks suppressed [Mon Aug 2 14:25:24 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:25:28 2021] rpi_firmware_get_throttled: 11 callbacks suppressed [Mon Aug 2 14:25:28 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:25:32 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:25:38 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:25:42 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:25:48 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:30:36 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:30:36 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:30:42 2021] rpi_firmware_get_throttled: 11 callbacks suppressed [Mon Aug 2 14:30:42 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:30:48 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:31:19 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:31:25 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:31:30 2021] Under-voltage detected! (0x00050005) pi@raspberrypi:~ $ -
@thomas-braun said in Z-wave2 mit iobroker verbinden (im Netzwerk):
dmesg -T
pi@raspberrypi:~ $ dmesg -T [Mon Aug 2 13:53:51 2021] Booting Linux on physical CPU 0x0 [Mon Aug 2 13:53:51 2021] Linux version 5.10.17-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1414 SMP Fri Apr 30 13:18:35 BST 2021 [Mon Aug 2 13:53:51 2021] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [Mon Aug 2 13:53:51 2021] CPU: div instructions available: patching division code [Mon Aug 2 13:53:51 2021] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [Mon Aug 2 13:53:51 2021] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [Mon Aug 2 13:53:51 2021] Memory policy: Data cache writealloc [Mon Aug 2 13:53:51 2021] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB [Mon Aug 2 13:53:51 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Mon Aug 2 13:53:51 2021] Zone ranges: [Mon Aug 2 13:53:51 2021] DMA [mem 0x0000000000000000-0x000000003b3fffff] [Mon Aug 2 13:53:51 2021] Normal empty [Mon Aug 2 13:53:51 2021] Movable zone start for each node [Mon Aug 2 13:53:51 2021] Early memory node ranges [Mon Aug 2 13:53:51 2021] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [Mon Aug 2 13:53:51 2021] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [Mon Aug 2 13:53:51 2021] On node 0 totalpages: 242688 [Mon Aug 2 13:53:51 2021] DMA zone: 2133 pages used for memmap [Mon Aug 2 13:53:51 2021] DMA zone: 0 pages reserved [Mon Aug 2 13:53:51 2021] DMA zone: 242688 pages, LIFO batch:63 [Mon Aug 2 13:53:51 2021] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [Mon Aug 2 13:53:51 2021] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [Mon Aug 2 13:53:51 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Mon Aug 2 13:53:51 2021] Built 1 zonelists, mobility grouping on. Total pages: 240555 [Mon Aug 2 13:53:51 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6f760246-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Mon Aug 2 13:53:51 2021] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [Mon Aug 2 13:53:51 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Mon Aug 2 13:53:51 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Mon Aug 2 13:53:51 2021] mem auto-init: stack:off, heap alloc:off, heap free:off [Mon Aug 2 13:53:51 2021] Memory: 879832K/970752K available (9216K kernel code, 1311K rwdata, 2940K rodata, 1024K init, 860K bss, 25384K reserved, 65536K cma-reserved) [Mon Aug 2 13:53:51 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Mon Aug 2 13:53:51 2021] ftrace: allocating 31910 entries in 63 pages [Mon Aug 2 13:53:51 2021] ftrace: allocated 63 pages with 6 groups [Mon Aug 2 13:53:51 2021] rcu: Hierarchical RCU implementation. [Mon Aug 2 13:53:51 2021] Rude variant of Tasks RCU enabled. [Mon Aug 2 13:53:51 2021] Tracing variant of Tasks RCU enabled. [Mon Aug 2 13:53:51 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Mon Aug 2 13:53:51 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Mon Aug 2 13:53:51 2021] random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=0 [Mon Aug 2 13:53:51 2021] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [Mon Aug 2 13:53:51 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [Mon Aug 2 13:53:51 2021] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [Mon Aug 2 13:53:51 2021] Switching to timer-based delay loop, resolution 52ns [Mon Aug 2 13:53:51 2021] Console: colour dummy device 80x30 [Mon Aug 2 13:53:51 2021] printk: console [tty1] enabled [Mon Aug 2 13:53:51 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [Mon Aug 2 13:53:51 2021] pid_max: default: 32768 minimum: 301 [Mon Aug 2 13:53:51 2021] LSM: Security Framework initializing [Mon Aug 2 13:53:51 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Mon Aug 2 13:53:51 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Mon Aug 2 13:53:51 2021] Disabling memory control group subsystem [Mon Aug 2 13:53:51 2021] CPU: Testing write buffer coherency: ok [Mon Aug 2 13:53:51 2021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Mon Aug 2 13:53:51 2021] Setting up static identity map for 0x100000 - 0x10003c [Mon Aug 2 13:53:51 2021] rcu: Hierarchical SRCU implementation. [Mon Aug 2 13:53:51 2021] smp: Bringing up secondary CPUs ... [Mon Aug 2 13:53:51 2021] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Mon Aug 2 13:53:51 2021] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Mon Aug 2 13:53:51 2021] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Mon Aug 2 13:53:51 2021] smp: Brought up 1 node, 4 CPUs [Mon Aug 2 13:53:51 2021] SMP: Total of 4 processors activated (153.60 BogoMIPS). [Mon Aug 2 13:53:51 2021] CPU: All CPU(s) started in HYP mode. [Mon Aug 2 13:53:51 2021] CPU: Virtualization extensions available. [Mon Aug 2 13:53:51 2021] devtmpfs: initialized [Mon Aug 2 13:53:51 2021] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [Mon Aug 2 13:53:51 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Mon Aug 2 13:53:51 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Mon Aug 2 13:53:51 2021] pinctrl core: initialized pinctrl subsystem [Mon Aug 2 13:53:51 2021] NET: Registered protocol family 16 [Mon Aug 2 13:53:51 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations [Mon Aug 2 13:53:51 2021] audit: initializing netlink subsys (disabled) [Mon Aug 2 13:53:51 2021] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [Mon Aug 2 13:53:51 2021] thermal_sys: Registered thermal governor 'step_wise' [Mon Aug 2 13:53:51 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Mon Aug 2 13:53:51 2021] hw-breakpoint: maximum watchpoint size is 8 bytes. [Mon Aug 2 13:53:51 2021] Serial: AMBA PL011 UART driver [Mon Aug 2 13:53:51 2021] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [Mon Aug 2 13:53:51 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T13:47:07, variant start [Mon Aug 2 13:53:51 2021] raspberrypi-firmware soc:firmware: Firmware hash is d7f29d96450abfc77cd6cf011af1faf1e03e5e56 [Mon Aug 2 13:53:51 2021] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [Mon Aug 2 13:53:51 2021] SCSI subsystem initialized [Mon Aug 2 13:53:51 2021] usbcore: registered new interface driver usbfs [Mon Aug 2 13:53:51 2021] usbcore: registered new interface driver hub [Mon Aug 2 13:53:51 2021] usbcore: registered new device driver usb [Mon Aug 2 13:53:51 2021] clocksource: Switched to clocksource arch_sys_counter [Mon Aug 2 13:53:52 2021] VFS: Disk quotas dquot_6.6.0 [Mon Aug 2 13:53:52 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Mon Aug 2 13:53:52 2021] FS-Cache: Loaded [Mon Aug 2 13:53:52 2021] CacheFiles: Loaded [Mon Aug 2 13:53:52 2021] NET: Registered protocol family 2 [Mon Aug 2 13:53:52 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Mon Aug 2 13:53:52 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Mon Aug 2 13:53:52 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Mon Aug 2 13:53:52 2021] TCP: Hash tables configured (established 8192 bind 8192) [Mon Aug 2 13:53:52 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Mon Aug 2 13:53:52 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Mon Aug 2 13:53:52 2021] NET: Registered protocol family 1 [Mon Aug 2 13:53:52 2021] RPC: Registered named UNIX socket transport module. [Mon Aug 2 13:53:52 2021] RPC: Registered udp transport module. [Mon Aug 2 13:53:52 2021] RPC: Registered tcp transport module. [Mon Aug 2 13:53:52 2021] RPC: Registered tcp NFSv4.1 backchannel transport module. [Mon Aug 2 13:53:52 2021] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [Mon Aug 2 13:53:52 2021] Initialise system trusted keyrings [Mon Aug 2 13:53:52 2021] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [Mon Aug 2 13:53:52 2021] zbud: loaded [Mon Aug 2 13:53:52 2021] FS-Cache: Netfs 'nfs' registered for caching [Mon Aug 2 13:53:52 2021] NFS: Registering the id_resolver key type [Mon Aug 2 13:53:52 2021] Key type id_resolver registered [Mon Aug 2 13:53:52 2021] Key type id_legacy registered [Mon Aug 2 13:53:52 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Mon Aug 2 13:53:52 2021] Key type asymmetric registered [Mon Aug 2 13:53:52 2021] Asymmetric key parser 'x509' registered [Mon Aug 2 13:53:52 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Mon Aug 2 13:53:52 2021] io scheduler mq-deadline registered [Mon Aug 2 13:53:52 2021] io scheduler kyber registered [Mon Aug 2 13:53:52 2021] bcm2708_fb soc:fb: FB found 1 display(s) [Mon Aug 2 13:53:52 2021] Console: switching to colour frame buffer device 82x26 [Mon Aug 2 13:53:52 2021] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [Mon Aug 2 13:53:52 2021] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [Mon Aug 2 13:53:52 2021] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default [Mon Aug 2 13:53:52 2021] bcm2835-rng 3f104000.rng: hwrng registered [Mon Aug 2 13:53:52 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [Mon Aug 2 13:53:53 2021] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [Mon Aug 2 13:53:53 2021] brd: module loaded [Mon Aug 2 13:53:53 2021] loop: module loaded [Mon Aug 2 13:53:53 2021] Loading iSCSI transport class v2.0-870. [Mon Aug 2 13:53:53 2021] libphy: Fixed MDIO Bus: probed [Mon Aug 2 13:53:53 2021] usbcore: registered new interface driver lan78xx [Mon Aug 2 13:53:53 2021] usbcore: registered new interface driver smsc95xx [Mon Aug 2 13:53:53 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Mon Aug 2 13:53:53 2021] Core Release: 2.80a [Mon Aug 2 13:53:53 2021] Setting default values for core params [Mon Aug 2 13:53:53 2021] Finished setting default values for core params [Mon Aug 2 13:53:53 2021] Using Buffer DMA mode [Mon Aug 2 13:53:53 2021] Periodic Transfer Interrupt Enhancement - disabled [Mon Aug 2 13:53:53 2021] Multiprocessor Interrupt Enhancement - disabled [Mon Aug 2 13:53:54 2021] OTG VER PARAM: 0, OTG VER FLAG: 0 [Mon Aug 2 13:53:54 2021] Dedicated Tx FIFOs mode [Mon Aug 2 13:53:54 2021] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024 [Mon Aug 2 13:53:54 2021] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [Mon Aug 2 13:53:54 2021] dwc_otg: Microframe scheduler enabled [Mon Aug 2 13:53:54 2021] WARN::hcd_init_fiq:457: FIQ on core 1 [Mon Aug 2 13:53:54 2021] WARN::hcd_init_fiq:458: FIQ ASM at 807be568 length 36 [Mon Aug 2 13:53:54 2021] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [Mon Aug 2 13:53:54 2021] dwc_otg 3f980000.usb: DWC OTG Controller [Mon Aug 2 13:53:54 2021] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [Mon Aug 2 13:53:54 2021] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [Mon Aug 2 13:53:54 2021] Init: Port Power? op_state=1 [Mon Aug 2 13:53:54 2021] Init: Power Port (0) [Mon Aug 2 13:53:54 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Mon Aug 2 13:53:54 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Mon Aug 2 13:53:54 2021] usb usb1: Product: DWC OTG Controller [Mon Aug 2 13:53:54 2021] usb usb1: Manufacturer: Linux 5.10.17-v7+ dwc_otg_hcd [Mon Aug 2 13:53:54 2021] usb usb1: SerialNumber: 3f980000.usb [Mon Aug 2 13:53:54 2021] hub 1-0:1.0: USB hub found [Mon Aug 2 13:53:54 2021] hub 1-0:1.0: 1 port detected [Mon Aug 2 13:53:54 2021] dwc_otg: FIQ enabled [Mon Aug 2 13:53:54 2021] dwc_otg: NAK holdoff enabled [Mon Aug 2 13:53:54 2021] dwc_otg: FIQ split-transaction FSM enabled [Mon Aug 2 13:53:54 2021] Module dwc_common_port init [Mon Aug 2 13:53:54 2021] usbcore: registered new interface driver usb-storage [Mon Aug 2 13:53:54 2021] mousedev: PS/2 mouse device common for all mice [Mon Aug 2 13:53:54 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Mon Aug 2 13:53:54 2021] sdhci: Secure Digital Host Controller Interface driver [Mon Aug 2 13:53:54 2021] sdhci: Copyright(c) Pierre Ossman [Mon Aug 2 13:53:54 2021] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [Mon Aug 2 13:53:54 2021] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [Mon Aug 2 13:53:54 2021] sdhci-pltfm: SDHCI platform and OF driver helper [Mon Aug 2 13:53:54 2021] ledtrig-cpu: registered to indicate activity on CPUs [Mon Aug 2 13:53:54 2021] hid: raw HID events driver (C) Jiri Kosina [Mon Aug 2 13:53:54 2021] usbcore: registered new interface driver usbhid [Mon Aug 2 13:53:54 2021] usbhid: USB HID core driver [Mon Aug 2 13:53:54 2021] Initializing XFRM netlink socket [Mon Aug 2 13:53:54 2021] NET: Registered protocol family 17 [Mon Aug 2 13:53:54 2021] Key type dns_resolver registered [Mon Aug 2 13:53:54 2021] Registering SWP/SWPB emulation handler [Mon Aug 2 13:53:54 2021] registered taskstats version 1 [Mon Aug 2 13:53:54 2021] Loading compiled-in X.509 certificates [Mon Aug 2 13:53:54 2021] Key type ._fscrypt registered [Mon Aug 2 13:53:54 2021] Key type .fscrypt registered [Mon Aug 2 13:53:54 2021] Key type fscrypt-provisioning registered [Mon Aug 2 13:53:54 2021] uart-pl011 3f201000.serial: cts_event_workaround enabled [Mon Aug 2 13:53:54 2021] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [Mon Aug 2 13:53:54 2021] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default [Mon Aug 2 13:53:54 2021] printk: console [ttyS0] disabled [Mon Aug 2 13:53:54 2021] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 50000000) is a 16550 [Mon Aug 2 13:53:55 2021] printk: console [ttyS0] enabled [Mon Aug 2 13:53:55 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Mon Aug 2 13:53:55 2021] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Mon Aug 2 13:53:55 2021] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [Mon Aug 2 13:53:55 2021] sdhost: log_buf @ (ptrval) (f7507000) [Mon Aug 2 13:53:55 2021] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Mon Aug 2 13:53:55 2021] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [Mon Aug 2 13:53:55 2021] of_cfs_init [Mon Aug 2 13:53:55 2021] of_cfs_init: OK [Mon Aug 2 13:53:55 2021] Waiting for root device PARTUUID=6f760246-02... [Mon Aug 2 13:53:55 2021] Indeed it is in host mode hprt0 = 00021501 [Mon Aug 2 13:53:55 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Mon Aug 2 13:53:55 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Mon Aug 2 13:53:55 2021] random: fast init done [Mon Aug 2 13:53:55 2021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Mon Aug 2 13:53:55 2021] mmc0: host does not support reading read-only switch, assuming write-enable [Mon Aug 2 13:53:55 2021] mmc0: new high speed SDHC card at address 59b4 [Mon Aug 2 13:53:55 2021] mmcblk0: mmc0:59b4 SD16G 14.6 GiB [Mon Aug 2 13:53:55 2021] mmcblk0: p1 p2 [Mon Aug 2 13:53:55 2021] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Mon Aug 2 13:53:55 2021] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Aug 2 13:53:55 2021] usb 1-1: new high-speed USB device number 2 using dwc_otg [Mon Aug 2 13:53:55 2021] devtmpfs: mounted [Mon Aug 2 13:53:55 2021] Indeed it is in host mode hprt0 = 00001101 [Mon Aug 2 13:53:55 2021] Freeing unused kernel memory: 1024K [Mon Aug 2 13:53:55 2021] mmc1: new high speed SDIO card at address 0001 [Mon Aug 2 13:53:55 2021] Run /sbin/init as init process [Mon Aug 2 13:53:55 2021] with arguments: [Mon Aug 2 13:53:55 2021] /sbin/init [Mon Aug 2 13:53:55 2021] with environment: [Mon Aug 2 13:53:55 2021] HOME=/ [Mon Aug 2 13:53:55 2021] TERM=linux [Mon Aug 2 13:53:55 2021] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [Mon Aug 2 13:53:55 2021] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [Mon Aug 2 13:53:55 2021] hub 1-1:1.0: USB hub found [Mon Aug 2 13:53:55 2021] hub 1-1:1.0: 5 ports detected [Mon Aug 2 13:53:56 2021] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [Mon Aug 2 13:53:56 2021] systemd[1]: System time before build time, advancing clock. [Mon Aug 2 13:53:56 2021] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [Mon Aug 2 13:53:56 2021] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [Mon Aug 2 13:53:56 2021] smsc95xx v2.0.0 [Mon Aug 2 13:53:56 2021] NET: Registered protocol family 10 [Mon Aug 2 13:53:56 2021] Segment Routing with IPv6 [Mon Aug 2 13:53:56 2021] libphy: smsc95xx-mdiobus: probed [Mon Aug 2 13:53:56 2021] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ab:95:46 [Mon Aug 2 13:53:56 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [Mon Aug 2 13:53:56 2021] systemd[1]: Detected architecture arm. [Mon Aug 2 13:53:56 2021] systemd[1]: Set hostname to <raspberrypi>. [Mon Aug 2 13:53:57 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mon Aug 2 13:53:57 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mon Aug 2 13:53:57 2021] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [Mon Aug 2 13:53:57 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mon Aug 2 13:53:57 2021] systemd[1]: Created slice system-systemd\x2dfsck.slice. [Mon Aug 2 13:53:57 2021] systemd[1]: Listening on Journal Socket (/dev/log). [Mon Aug 2 13:53:57 2021] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Mon Aug 2 13:53:57 2021] systemd[1]: Listening on Syslog Socket. [Mon Aug 2 13:53:57 2021] systemd[1]: Listening on udev Kernel Socket. [Mon Aug 2 13:53:57 2021] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Mon Aug 2 13:53:58 2021] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [Mon Aug 2 13:53:58 2021] systemd-journald[104]: Received request to flush runtime journal from PID 1 [Mon Aug 2 13:53:59 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] mc: Linux media interface: v0.10 [Mon Aug 2 13:53:59 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Mon Aug 2 13:53:59 2021] [vc_sm_connected_init]: start [Mon Aug 2 13:53:59 2021] [vc_sm_connected_init]: installed successfully [Mon Aug 2 13:53:59 2021] videodev: Linux video capture interface: v2.00 [Mon Aug 2 13:53:59 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Mon Aug 2 13:53:59 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Mon Aug 2 13:53:59 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Mon Aug 2 13:53:59 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Mon Aug 2 13:53:59 2021] bcm2835_audio bcm2835_audio: card created with 8 channels [Mon Aug 2 13:53:59 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Mon Aug 2 13:53:59 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Mon Aug 2 13:54:00 2021] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [Mon Aug 2 13:54:00 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [Mon Aug 2 13:54:00 2021] usbcore: registered new interface driver brcmfmac [Mon Aug 2 13:54:00 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2 [Mon Aug 2 13:54:00 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [Mon Aug 2 13:54:00 2021] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [Mon Aug 2 13:54:00 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd [Mon Aug 2 13:54:01 2021] Under-voltage detected! (0x00050000) [Mon Aug 2 13:54:02 2021] random: crng init done [Mon Aug 2 13:54:02 2021] random: 7 urandom warning(s) missed due to ratelimiting [Mon Aug 2 13:54:02 2021] uart-pl011 3f201000.serial: no DMA platform data [Mon Aug 2 13:54:02 2021] 8021q: 802.1Q VLAN Support v1.8 [Mon Aug 2 13:54:03 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [Mon Aug 2 13:54:03 2021] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) [Mon Aug 2 13:54:03 2021] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [Mon Aug 2 13:54:03 2021] smsc95xx 1-1.1:1.0 eth0: Link is Down [Mon Aug 2 13:54:07 2021] Bluetooth: Core ver 2.22 [Mon Aug 2 13:54:07 2021] NET: Registered protocol family 31 [Mon Aug 2 13:54:07 2021] Bluetooth: HCI device and connection manager initialized [Mon Aug 2 13:54:07 2021] Bluetooth: HCI socket layer initialized [Mon Aug 2 13:54:07 2021] Bluetooth: L2CAP socket layer initialized [Mon Aug 2 13:54:07 2021] Bluetooth: SCO socket layer initialized [Mon Aug 2 13:54:07 2021] Bluetooth: HCI UART driver ver 2.3 [Mon Aug 2 13:54:07 2021] Bluetooth: HCI UART protocol H4 registered [Mon Aug 2 13:54:07 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered [Mon Aug 2 13:54:07 2021] Bluetooth: HCI UART protocol Broadcom registered [Mon Aug 2 13:54:07 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Mon Aug 2 13:54:07 2021] Bluetooth: BNEP filters: protocol multicast [Mon Aug 2 13:54:07 2021] Bluetooth: BNEP socket layer initialized [Mon Aug 2 13:54:08 2021] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [Mon Aug 2 13:54:08 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Mon Aug 2 13:54:09 2021] Voltage normalised (0x00000000) [Mon Aug 2 13:54:20 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 13:54:34 2021] Voltage normalised (0x00000000) [Mon Aug 2 13:54:36 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 13:54:43 2021] Voltage normalised (0x00000000) [Mon Aug 2 13:59:24 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 13:59:24 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 13:59:30 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 13:59:30 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:00:09 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:00:13 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:00:47 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:00:53 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:04:58 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:04:58 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:05:03 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:05:03 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:05:44 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:05:48 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:06:34 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:06:45 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:10:15 2021] rpi_firmware_get_throttled: 8 callbacks suppressed [Mon Aug 2 14:10:15 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:10:21 2021] rpi_firmware_get_throttled: 8 callbacks suppressed [Mon Aug 2 14:10:21 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:10:48 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:10:54 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:12:11 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:12:17 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:15:16 2021] rpi_firmware_get_throttled: 6 callbacks suppressed [Mon Aug 2 14:15:16 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:15:22 2021] rpi_firmware_get_throttled: 6 callbacks suppressed [Mon Aug 2 14:15:22 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:15:39 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:15:45 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:16:10 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:16:16 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:20:20 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:20:20 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:20:26 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:20:26 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:20:30 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:20:34 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:20:43 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:20:49 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:25:24 2021] rpi_firmware_get_throttled: 11 callbacks suppressed [Mon Aug 2 14:25:24 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:25:28 2021] rpi_firmware_get_throttled: 11 callbacks suppressed [Mon Aug 2 14:25:28 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:25:32 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:25:38 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:25:42 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:25:48 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:30:36 2021] rpi_firmware_get_throttled: 10 callbacks suppressed [Mon Aug 2 14:30:36 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:30:42 2021] rpi_firmware_get_throttled: 11 callbacks suppressed [Mon Aug 2 14:30:42 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:30:48 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:31:19 2021] Under-voltage detected! (0x00050005) [Mon Aug 2 14:31:25 2021] Voltage normalised (0x00000000) [Mon Aug 2 14:31:30 2021] Under-voltage detected! (0x00050005) pi@raspberrypi:~ $Dein Netz
werkteil ist zu schwach. Da brauch ich gar nicht weiter schauen.
Und deine Zeitzone ist vermutlich auch falsch gesetzt.Bei dem Gerät auf /dev/ttyAMA0 dürfte es sich um das Raspi-eigene Bluetooth handeln.
-
Dein Netz
werkteil ist zu schwach. Da brauch ich gar nicht weiter schauen.
Und deine Zeitzone ist vermutlich auch falsch gesetzt.Bei dem Gerät auf /dev/ttyAMA0 dürfte es sich um das Raspi-eigene Bluetooth handeln.
@thomas-braun sagte in Z-wave2 mit iobroker verbinden (im Netzwerk):
Netzwerk
Netzteil meinst du sicher?
-
@rhartmann76 Hast du in
/boot/config.txtfolgende Zeilen drin?enable_uart=1 dtoverlay=pi3-miniuart-bt@alcalzone dtoverlay=pi3-miniuart-bt fehlt. Habe ich nun eingetragen und einen reboot gemacht.
Leider immer noch GELB
Danke
Support us
313
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge