Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[Berserker]

@thomas-braun

Ok

Ich bin dankbar für jeden Tipp.
Verstehen tue ich das alles nicht, ich copy paste nur was anscheinend bei anderen funktioniert haben soll :(

internal/modules/cjs/loader.js:818
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:815:15)
    at Function.Module._load (internal/modules/cjs/loader.js:667:27)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:60:12)
    at internal/main/run_main_module.js:17:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

[Thomas Braun]

@berserker Bitte komplette Ein- und Ausgaben posten, damit man sieht auf welches Kommando da wie reagiert wurde.

[Berserker]

@thomas-braun

Sorry

pi@pi:~ $ iobroker status
internal/modules/cjs/loader.js:818
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:815:15)
    at Function.Module._load (internal/modules/cjs/loader.js:667:27)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:60:12)
    at internal/main/run_main_module.js:17:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}
pi@pi:~ $ 

[Thomas Braun]

@berserker
Versuch mal

cd /opt/iobroker/
sudo -H -u iobroker npm install iobroker.js-controller

An der Stelle ist ein sudo korrekt...

[Berserker]

@thomas-braun

Das kommt dabei raus

pi@pi:~ $ cd /opt/iobroker
pi@pi:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller

> iobroker.js-controller@3.2.16 preinstall /opt/iobroker/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.14.12

> authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten
  CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o
../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:
../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
   Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args);
                                                                                       ^
In file included from ../authenticate_pam.cc:23:
../../nan/nan.h:1026:46: note: declared here
   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(
                                              ^~~~~~~~~~~~
../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
   Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args);
                                                                                       ^
In file included from ../authenticate_pam.cc:23:
../../nan/nan.h:1026:46: note: declared here
   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(
                                              ^~~~~~~~~~~~
../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’:
../authenticate_pam.cc:147:83: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked());
                                                                                   ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8-internal.h:14,
                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:27,
                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:3553:51: note: declared here
   V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key));
                                                   ^~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../authenticate_pam.cc:150:69: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’
    serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1);
                                                                     ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:152:69: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked());
                                                                     ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8-internal.h:14,
                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:27,
                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:3553:51: note: declared here
   V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key));
                                                   ^~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../authenticate_pam.cc:155:66: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’
    remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1);
                                                                  ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:160:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’
  username->WriteUtf8(m->username, sizeof(m->username) - 1);
                                                          ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:161:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’
  password->WriteUtf8(m->password, sizeof(m->password) - 1);
                                                          ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc: At global scope:
../authenticate_pam.cc:170:11: error: variable or field ‘init’ declared void
 void init(Handle<Object> exports) {
           ^~~~~~
../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope
../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’
 void init(Handle<Object> exports) {
           ^~~~~~
           rand_r
../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token
 void init(Handle<Object> exports) {
                        ^
../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope
 void init(Handle<Object> exports) {
                          ^~~~~~~
In file included from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope
 NODE_MODULE(authenticate_pam, init);
                               ^~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’
       (node::addon_register_func) (regfunc),                          \
                                    ^~~~~~~
../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(authenticate_pam, init);
 ^~~~~~~~~~~
../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’
 NODE_MODULE(authenticate_pam, init);
                               ^~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’
       (node::addon_register_func) (regfunc),                          \
                                    ^~~~~~~
../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(authenticate_pam, init);
 ^~~~~~~~~~~
make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:314:20)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:276:12)
gyp ERR! System Linux 5.10.17-v7l+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam
gyp ERR! node -v v12.22.1
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok 

> iobroker.js-controller@3.2.16 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

 Cannot read system.config: null (OK when migrating or restoring)
object 0_userdata.0.example_state created
object 0_userdata.0 created
object alias.0 created
object system.certificates created
object system.repositories created
object system.config created
object enum.functions created
object enum.rooms created
object system.group.user created
object system.group.administrator created
object _design/system created

The following notifications happened during sync: 
- Ignoring Directory "admin.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "alexa2.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "backitup.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "deconz.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "discovery.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "eufy-security.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "history.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "homee.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "hue.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "info.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "javascript.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "ph803w.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "sonos.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "terminal" because officially not created as meta object. Please remove directory!
- Ignoring Directory "terminal.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "web" because officially not created as meta object. Please remove directory!
- Ignoring Directory "web.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "yahka.admin" because officially not created as meta object. Please remove directory!

Renamed repository "default to "stable"
Renamed repository "latest to "beta"
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.2 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 (node_modules/authenticate-pam):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 install: `node-gyp rebuild`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

+ iobroker.js-controller@3.2.16
added 13 packages from 33 contributors in 35.592s

54 packages are looking for funding
  run `npm fund` for details



   ╭────────────────────────────────────────────────────────────────╮
   │                                                                │
   │      New major version of npm available! 6.14.12 → 7.19.0      │
   │   Changelog: https://github.com/npm/cli/releases/tag/v7.19.0   │
   │               Run npm install -g npm to update!                │
   │                                                                │
   ╰────────────────────────────────────────────────────────────────╯

pi@pi:/opt/iobroker $ 

[Thomas Braun]

@berserker Der erste Teil mit den Fehlern stammt vom terminal-Adapter. Den würde ich rauswerfen, wenn das System wieder läuft.

iobroker restart
iobroker status
iobroker list instances

[Homoran]

@berserker sagte in Stromausfall Web-Oberfläche öffnet sich nicht mehr:

ich copy paste nur was anscheinend bei anderen funktioniert haben soll

wenn du so etwas machst musst du aber genau darauf achten, für welche Installation diese codes genutzt wurden.
Da hat sich in den 7 Jahren ioBroker einiges geändert

[Berserker]

@thomas-braun

Okay werde ich machen

Ausgabe ist folgendes:

pi@pi:/opt/iobroker $ iobroker restart
pi@pi:/opt/iobroker $ iobroker status
iobroker is running on this host.


Objects type: file
States  type: file
pi@pi:/opt/iobroker $ iobroker list instances


+ instance is alive
pi@pi:/opt/iobroker $ 

Danke schonmal für die Hilfe!!

[Thomas Braun]

@berserker

iobroker list adapters

[Berserker]

@thomas-braun

da kommt nichts

pi@pi:/opt/iobroker $ iobroker list adapters
pi@pi:/opt/iobroker $ 

[Thomas Braun]

@berserker Okay.

iobroker add admin

[Homoran]

@berserker sagte in Stromausfall Web-Oberfläche öffnet sich nicht mehr:

Cannot read system.config: null (OK when migrating or restoring)

Da gibt's Arbeit für das Mini HowTo

[Berserker]

@thomas-braun said in Stromausfall Web-Oberfläche öffnet sich nicht mehr:

iobroker add admin

pi@pi:/opt/iobroker $ iobroker add admin
host.pi install adapter admin
upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/words.js words.js application/javascript
upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index_m.html index_m.html text/html
upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index.html index.html text/html
upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png
host.pi object system.adapter.admin created/updated
host.pi create instance admin
host.pi object admin.0.info.newsETag created
host.pi object admin.0.info.newsfeed created
host.pi object admin.0.connected created
host.pi object admin.0 created
host.pi object admin.0.info created
host.pi object system.adapter.admin.upload created
host.pi object system.adapter.admin.0.logLevel created
host.pi object system.adapter.admin.0.sigKill created
host.pi object system.adapter.admin.0.eventLoopLag created
host.pi object system.adapter.admin.0.outputCount created
host.pi object system.adapter.admin.0.inputCount created
host.pi object system.adapter.admin.0.uptime created
host.pi object system.adapter.admin.0.memRss created
host.pi object system.adapter.admin.0.memHeapTotal created
host.pi object system.adapter.admin.0.memHeapUsed created
host.pi object system.adapter.admin.0.cputime created
host.pi object system.adapter.admin.0.cpu created
host.pi object system.adapter.admin.0.compactMode created
host.pi object system.adapter.admin.0.connected created
host.pi object system.adapter.admin.0.alive created
host.pi object system.adapter.admin.0 created
pi@pi:/opt/iobroker $ 

[Thomas Braun]

@berserker
Läuft der Admin jetzt?

iobroker list instances

[Berserker]

@berserker

Die Web Oberfläche ist wieder da.
Ich lass erstmal die Finger weg bis du etwas dazu sagst.

[Berserker]

@thomas-braun said in Stromausfall Web-Oberfläche öffnet sich nicht mehr:

iobroker list instances

pi@pi:/opt/iobroker $ iobroker list instances
+ system.adapter.admin.0                  : admin                 : pi                                       -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

+ instance is alive
pi@pi:/opt/iobroker $ 

Das kommt dabei raus

[Thomas Braun]

@berserker Dann solltest du jetzt die fehlenden Adapter ja nachinstallieren können.

[Berserker]

@thomas-braun

Wenn ich jetzt die fehlenden Adapter nachinstalliert, sind die Settings dann noch da ??

Vielen Dank erstmal

[Berserker]

@thomas-braun

Wenn ich Adapter installieren möchte, dann steht bei den Adaptern die ich hatte, dass schon einer Installiert ist.

Kann ich zB. den Skripte Adapter irgendwie mit den alten Skripten herunterladen?

[Berserker]

@berserker

So wie hier