Probleme mit Serialport bei zwave2
-
@esmax666 sagte in Probleme mit Serialport bei zwave2:
mit /dev/serial0/
Ok, da ist kein Z-Wave Stick dran
No such file or directory, cannot open dev/ttyAMA0
Du hast das führende / vergessen:
/dev/ttyAMA0, nichtdev/ttyAMA0 -
hat schon jemand zwave2 mit aeotec z wave + und iobroker ?
gibt es sonst fertig image ?
ich habe die image verwendet:
https://www.raspberrypi.org/software/operating-systems/ok stimmt er ist hier blokiert:
pi@raspberrypi:~ $ cd /opt/iobroker/node_modules/iobroker.zwave2 pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js - -force --logs 2021-05-20 21:56:05.370 - error: zwave2.0 (15073) adapter disabled 2021-05-20 21:56:05.380 - info: zwave2.0 (15073) starting. Version 1.9.3 in /op t/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 21:56:05.452 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚██ ███╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚═ ═══╝ ╚══════╝ 21:56:05.456 DRIVER version 7.4.0 21:56:05.457 CONFIG version 7.4.0 21:56:05.458 DRIVER 21:56:05.459 DRIVER starting driver... 21:56:05.486 DRIVER opening serial port /dev/ttyAMA0 21:56:05.504 DRIVER serial port opened 21:56:05.506 SERIAL » [NAK] (0x15) -
-
-
@alcalzone
also das ist genau ZW090-C (steht zwave plus) -
@esmax666 Stopp, nicht verwechseln... Beide sind Z-Wave Plus, beide werden unter "ZW090-C" verkauft.
Aber einer heißt Gen5 und macht fiese Probleme wenn er nicht in einem externen USB2.0-Hub steckt und einer heißt Gen5+ und funktioniert einwandfrei. -
@alcalzone ach so dann habe ich gen5, ich muss jetzt ein hub kaufen
-
@esmax666 Bevor du viel Geld für nen Hub ausgibst, kauf dir lieber gleich nen Z-Wave 700 Stick:
https://www.mouser.de/ProductDetail/Silicon-Labs/SLUSB001A?qs=u16ybLDytRbJsMfgk3EnSA==
Kostet fast nix und ist Zukunftssicher. -
@alcalzone hab noch ein irgenwo zu hause, finde ich gerade leider nicht
sonst gibt auch modele für 3€ -
@alcalzone
EDIT: es geht jetzt : (mit ACM09
hi hab jetzt ein usb hub, und jetzt zeigt er ACM0
und ich bekomme das:
pi@raspberrypi:~ $ ls -ls /dev/ | grep serial 0 drwxr-xr-x 4 root root 80 Mai 21 13:46 serial 0 lrwxrwxrwx 1 root root 5 Mai 20 20:56 serial0 -> ttyS0 0 lrwxrwxrwx 1 root root 7 Mai 20 20:56 serial1 -> ttyAMA0 pi@raspberrypi:~ $ cd /opt/iobroker/node_modules/iobroker.zwave2 pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js - -force --logs 2021-05-21 13:52:23.280 - info: zwave2.0 (393) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 13:52:23.362 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 13:52:23.369 DRIVER version 7.4.0 13:52:23.371 CONFIG version 7.4.0 13:52:23.372 DRIVER 13:52:23.372 DRIVER starting driver... 13:52:23.409 DRIVER opening serial port /dev/serial1 13:52:23.429 DRIVER serial port errored: Error Resource temporarily unavailable Cannot lock port 13:52:23.430 DRIVER destroying driver instance... 2021-05-21 13:52:23.433 - error: zwave2.0 (393) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port/dev/serial1
pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-21 13:53:56.938 - info: zwave2.0 (530) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 13:53:57.027 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 13:53:57.032 DRIVER version 7.4.0 13:53:57.034 CONFIG version 7.4.0 13:53:57.035 DRIVER 13:53:57.036 DRIVER starting driver... 13:53:57.069 DRIVER opening serial port /dev/serial1 13:53:57.089 DRIVER serial port errored: Error Resource temporarily unavailable Cannot lock port 13:53:57.092 DRIVER destroying driver instance... 2021-05-21 13:53:57.096 - error: zwave2.0 (530) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port/dev/ttyACM0
pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-21 13:56:15.231 - info: zwave2.0 (615) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 13:56:15.326 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 13:56:15.330 DRIVER version 7.4.0 13:56:15.332 CONFIG version 7.4.0 13:56:15.333 DRIVER 13:56:15.334 DRIVER starting driver... 13:56:15.365 DRIVER opening serial port /dev/ttyACM0 13:56:15.386 DRIVER serial port errored: Error Resource temporarily unavailable Cannot lock port 13:56:15.387 DRIVER destroying driver instance... 2021-05-21 13:56:15.390 - error: zwave2.0 (615) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port 2021-05-21 13:56:15.948 - debug: zwave2.0 (615) sendTo "getAssociationGroups" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:15.952 - debug: zwave2.0 (615) sendTo "getAssociationGroups" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:15.953 - debug: zwave2.0 (615) sendTo "getAssociationGroups" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:16.953 - debug: zwave2.0 (615) sendTo "getAssociations" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:16.957 - debug: zwave2.0 (615) sendTo "getAssociations" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:16.961 - debug: zwave2.0 (615) sendTo "getAssociations" to system.adapter.admin.0 from system.adapter.zwave2.0pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-21 13:57:06.347 - info: zwave2.0 (643) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 13:57:06.432 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 13:57:06.437 DRIVER version 7.4.0 13:57:06.439 CONFIG version 7.4.0 13:57:06.439 DRIVER 13:57:06.440 DRIVER starting driver... 13:57:06.472 DRIVER opening serial port /dev/ttyAMA0 13:57:06.496 DRIVER serial port errored: Error Resource temporarily unavailable Cannot lock port 13:57:06.497 DRIVER destroying driver instance... 2021-05-21 13:57:06.501 - error: zwave2.0 (643) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port -
@esmax666 sagte in Probleme mit Serialport bei zwave2:
Resource temporarily unavailable Cannot lock port
Da scheint immer noch was anderes drauf zuzugreifen.
-
@alcalzone 20€ Versandkosten... krass, ist ja mehr als der Stick kostet. 🤮
-
@alcalzone was kannst ich sonst noch machen ? willst du noch etwas sehen ?
-
@esmax666
ich habe sonst ganz normal hier rasbian hier runtergelanden
https://www.raspberrypi.org/software/operating-systems/und dann einfach
curl -sLf https://iobroker.net/install.sh | bash -soll man lieber / gibt es sonst fertig image mit rasbian ?
oder wo konnte noch das problem kommen ?
-
@esmax666
Nein, alles richtig gemacht.Du schreibst doch aber oben, dass jetzt alles funktioniert?
-
@thomas-braun sagte in Probleme mit Serialport bei zwave2:
Du schreibst doch anber oben, dass jetzt alles funktioniert?
Tuts aber nicht - der Adapter verweigert immer noch den "richtigen" Start wegen "cannot lock port".
-
Dann halt nochmal mit
sudo lsof /dev/tty[wasauchimmergeradeaktivseinsollte]schauen.
-
@Esmax666 schau auch mal ob in
/boot/config.txteine Zeileenable_uart=1zu finden ist.
Auf meinem Pi4 ist das der Fall und dort geht der Adapter. -
pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ sudo lsof /dev/ttyACM0 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME node 673 iobroker 26uW CHR 166,0 0t0 427 /dev/ttyACM0 -
@alcalzone said in Probleme mit Serialport bei zwave2:
config.txt
ganz am ende
pi@raspberrypi:/boot $ cat config.txt # For more options and information see # http://rpf.io/configtxt # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment this if your display has a black border of unused pixels visible # and your display can output without overscan #disable_overscan=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output #hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Uncomment this to enable infrared communication. #dtoverlay=gpio-ir,gpio_pin=17 #dtoverlay=gpio-ir-tx,gpio_pin=18 # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on [pi4] # Enable DRM VC4 V3D driver on top of the dispmanx display stack dtoverlay=vc4-fkms-v3d max_framebuffers=2 [all] #dtoverlay=vc4-fkms-v3d enable_uart=1
