Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[Thomas Braun]

@esmax666 sagte in Test Adapter Z-Wave 2 v1.10.x:

Man muss wahrscheinlich irgendwo usb driver installieren

Windows User, oder? Der Treiber ist im Linux-Kernel schon drin.

Und die anstehenden Updates sehe ich links in deinem Screenshot.

iobroker update
iobroker upgrade

[Esmax666]

@thomas-braun ich weiss aber irgenwie erkennt zwave2 nicht usb0 und usb1

Die version hier sind auch richtig oder?

Type: js-controller
Title: JS controller
OS: linux
Available: 3.2.16
Installed: 3.2.16
Events: ↦15 / ↦13

pi@raspberrypi:~ $ node -v
v12.22.1
pi@raspberrypi:~ $ nodejs -v
v12.22.1
pi@raspberrypi:~ $ npm -v
6.14.12

[Thomas Braun]

@esmax666 Der Stick liegt auf dem device node /dev/ttyAMA0

[Esmax666]

@thomas-braun

Soll ich noch das machen?

https://medium.com/@thedyslexiccoder/how-to-update-nodejs-npm-on-a-raspberry-pi-4-da75cad4148c

[Thomas Braun]

@esmax666 Nein.

Die Anleitung wird so ohnehin nicht funktionieren, da fehlt noch Zeug davor.

[Esmax666]

@thomas-braun was meinst was feht

Sonst fur die zwave0 version gab das:

Raspberry Pi3 only: Activate GPIO UART
On Raspberry Pi 3, the UART is by default occupied by the bluetooth module. To activate it for use with a GPIO module, follow these steps:

sudo nano /boot/cmdline.txt

remove console=serial0,115200
save the file and close it
sudo nano /boot/config.txt
Look for each of the following lines. If they are commented out with a #, remove that. If they don't exist, add them to the end of the file:

dtoverlay=pi3-miniuart-bt
enable_uart=1
force_turbo=1
reboot

Aber das brauchen wir nicht mehr oder ? Hab nicht gesehen fur zwave2

[Thomas Braun]

@esmax666 Ich kenn den Adapter nicht. Mal in die readme geschaut? Da steht vielleicht was drin.

[AlCalzone]

@esmax666 Probier mal /dev/serial0, da bin ich beim Raspberry Pi 4 auch schon drüber gestolpert.

Ansonsten: ist das wirklich ein Z-Stick Gen5 oder doch ein Z-Stick Gen5 + ? Ich hab grob im Hinterkopf dass ersterer Probleme mit neueren USB-Schnittstellen macht.

[Esmax666]

@thomas-braun

Hab gerade geprüft auf raspi3 hatte ich eher /dev/ttyACM0

[Esmax666]

@alcalzone Z-Stick Gen5 + mit raspu hat das funktioniert mit acm0

[Esmax666]

@alcalzone

zwave2.0	2021-05-16 00:24:27.762	error	(23524) The Z-Wave driver could not be started: Error: No such file or directory, cannot open /dev/serial0
zwave2.0	2021-05-16 00:24:27.604	info	(23524) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 00:24:25.121	info	instance system.adapter.zwave2.0 started with pid 23524
host.raspberrypi	2021-05-16 00:24:22.595	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 00:24:21.999	info	(13067) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 00:24:21.998	info	(13067) terminating
zwave2.0	2021-05-16 00:24:21.996	info	(13067) Shutting down driver...
host.raspberrypi	2021-05-16 00:24:21.997	info	stopInstance system.adapter.zwave2.0 send kill signal
zwave2.0	2021-05-16 00:24:21.994	info	(13067) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 00:24:21.989	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 00:21:58.507	error	(13067) The Z-Wave driver could not be started: Error: No such file or directory, cannot open /dev/ttyACM0
zwave2.0	2021-05-16 00:21:58.367	info	(13067) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 00:21:56.051	info	instance system.adapter.zwave2.0 started with pid 13067
host.raspberrypi	2021-05-16 00:21:53.467	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
host.raspberrypi	2021-05-16 00:21:52.921	info	stopInstance system.adapter.zwave2.0 send kill signal
zwave2.0	2021-05-16 00:21:52.882	info	(12357) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 00:21:52.880	info	(12357) terminating
zwave2.0	2021-05-16 00:21:52.879	info	(12357) Shutting down driver...
zwave2.0	2021-05-16 00:21:52.877	info	(12357) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 00:21:52.859	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 00:21:49.469	error	(12357) The Z-Wave driver could not be started: Error: No such file or directory, c

[Esmax666]

@alcalzone

Soll ich das machen

https://forum.iobroker.net/post/629693

[Esmax666]

@alcalzone

Jetzt

zwave2.0	2021-05-16 07:55:56.747	error	(12308) The Z-Wave driver could not be started: Error: Is a directory, cannot open /dev/
zwave2.0	2021-05-16 07:55:56.584	info	(12308) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:55:54.148	info	instance system.adapter.zwave2.0 started with pid 12308
host.raspberrypi	2021-05-16 07:55:51.659	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:55:51.028	info	(6004) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:55:51.026	info	(6004) terminating
zwave2.0	2021-05-16 07:55:51.025	info	(6004) Shutting down driver...
zwave2.0	2021-05-16 07:55:51.023	info	(6004) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:55:51.022	info	stopInstance system.adapter.zwave2.0 send kill signal
host.raspberrypi	2021-05-16 07:55:51.014	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 07:54:38.393	info	(6004) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:54:35.967	info	instance system.adapter.zwave2.0 started with pid 6004
host.raspberrypi	2021-05-16 07:54:33.559	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:54:32.824	info	(21886) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:54:32.822	info	(21886) terminating
zwave2.0	2021-05-16 07:54:32.820	info	(21886) Shutting down driver...
zwave2.0	2021-05-16 07:54:32.812	info	(21886) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:54:32.796	info	stopInstance system.adapter.zwave2.0 send kill signal
host.raspberrypi	2021-05-16 07:54:32.776	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
info.0	2021-05-16 07:49:56.003	warn	(2765) State "info.0.uuid" has no existing object, this might lead to an error in future versions
zwave2.0	2021-05-16 07:44:28.868	info	(21886) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:44:26.457	info	instance system.adapter.zwave2.0 started with pid 21886
host.raspberrypi	2021-05-16 07:44:24.074	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:44:23.304	info	(4553) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:44:23.303	info	(4553) terminating
zwave2.0	2021-05-16 07:44:23.301	info	(4553) Shutting down driver...
zwave2.0	2021-05-16 07:44:23.294	info	(4553) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:44:23.292	info	stopInstance system.adapter.zwave2.0 send kill signal

Version

[Esmax666]

@thomas-braun said in Test Adapter Z-Wave 2 v1.10.x:

Windows User, oder? Der Treiber ist im Linux-Kernel schon drin.

warum windows User ?
steht sogar in log

host.raspberrypi	2021-05-16 08:00:00.072	info	instance system.adapter.ical.0 started with pid 29746
zwave2.0	2021-05-16 07:55:56.747	error	(12308) The Z-Wave driver could not be started: Error: Is a directory, cannot open /dev/
zwave2.0	2021-05-16 07:55:56.584	info	(12308) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:55:54.148	info	instance system.adapter.zwave2.0 started with pid 12308
host.raspberrypi	2021-05-16 07:55:51.659	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:55:51.028	info	(6004) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:55:51.026	info	(6004) terminating

[Esmax666]

Linux raspberrypi 5.10.17-v7l+ #1414 SMP Fri Apr 30 13:20:47 BST 2021 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun May 16 00:06:39 2021
pi@raspberrypi:~ $ npm i iobroker.zwave2

> @serialport/bindings@9.0.7 install /home/pi/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

prebuild-install WARN install No prebuilt binaries found (target=12.22.1 runtime=node arch=arm libc= platform=linux)
make: Verzeichnis „/home/pi/node_modules/@serialport/bindings/build“ wird betreten
  CXX(target) Release/obj.target/bindings/src/serialport.o
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:271:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:316:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:366:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
 _queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                        ^~~~~~~~~~~~~~~~~~~~

../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:412:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:56,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/pi/.cache/node-gyp/12.22.1/include/node/node.h:736:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/pi/.cache/node-gyp/12.22.1/include/node/node.h:770:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/poller.o
  CXX(target) Release/obj.target/bindings/src/serialport_linux.o
  SOLINK_MODULE(target) Release/obj.target/bindings.node
  COPY Release/bindings.node
make: Verzeichnis „/home/pi/node_modules/@serialport/bindings/build“ wird verlassennpm WARN saveError ENOENT: no such file or directory, open '/home/pi/package.json'
npm notice created a lockfile as package-lock.json. You should commit this file.
npm WARN enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm WARN pi No description
npm WARN pi No repository field.
npm WARN pi No README data
npm WARN pi No license field.

+ iobroker.zwave2@1.10.0
added 168 packages from 189 contributors and audited 168 packages in 41.299s

29 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

pi@raspberrypi:~ $ npm i zwave-js
npm WARN saveError ENOENT: no such file or directory, open '/home/pi/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm WARN pi No description
npm WARN pi No repository field.
npm WARN pi No README data
npm WARN pi No license field.

+ zwave-js@7.4.0
updated 1 package and audited 309 packages in 6.047s

29 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

pi@raspberrypi:~ $

[Esmax666]

@alcalzone

Das ist die Raspi3 die die funktionniert (npm version vielleicht passt nicht)
(hier ist ACM0) auf raspi4 geht auch nicht fehlt etwas ?

[Thomas Braun]

@esmax666 sagte in Test Adapter Z-Wave 2 v1.10.x:

steht sogar in log

Da steht, dass /dev kein device node ist sondern ein Verzeichnis. Vermutlich hast du /dev in den Einstellungen des Adapters drin.

pi@raspberrypi:~ $ npm i iobroker.zwave2

Ist falsch. Jetzt hast du das im /home-Verzeichnis von pi installiert.
Nimm den Adapter aus der Adapterliste im Admin.

Aus deinem dmesg:

[Sa Mai 15 21:06:15 2021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2

Das ist der für das Gerät geladene Treiber. Und da sieht man auch, dass das Device auf ttyAMA0 liegt.

[Esmax666]

@thomas-braun said in Test Adapter Z-Wave 2 v1.10.x:

Nimm den Adapter aus der Adapterliste im Admin.

Hatte ich schon gemacht.

sogar sogar instance weg gemacht und neu gemacht

leider geht es nicht mehr

[Thomas Braun]

@esmax666 sagte in Test Adapter Z-Wave 2 v1.10.x:

leider geht es nicht mehr

Stimmt dann wohl.
Leider kann man aus deiner 'Fehlerbeschreibung' nichts herauslesen.

[Esmax666]

@thomas-braun was kann ich sonst noch als info geben ?

sonst habe ich noch 2 warn und 1 error

info.0	2021-05-16 13:07:15.628	warn	(2791) State "info.0.uuid" has no existing object, this might lead to an error in future versions
host.raspberrypi	2021-05-16 13:00:08.345	info	instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)
host.raspberrypi	2021-05-16 13:00:00.042	info	instance system.adapter.ical.0 started with pid 5361
zwave2.0	2021-05-16 12:59:53.829	info	(5346) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 12:59:51.487	info	instance system.adapter.zwave2.0 started with pid 5346
host.raspberrypi	2021-05-16 12:59:21.429	info	Restart adapter system.adapter.zwave2.0 because enabled
host.raspberrypi	2021-05-16 12:59:21.428	info	instance system.adapter.zwave2.0 terminated with code NaN ()
host.raspberrypi	2021-05-16 12:59:21.427	warn	instance system.adapter.zwave2.0 terminated due to SIGABRT
host.raspberrypi	2021-05-16 12:59:21.422	error	Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory
zwave2.0	2021-05-16 12:45:57.264	info	(5176) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 12:45:55.024	info	instance system.adapter.zwave2.0 started with pid 5176
host.raspberrypi	2021-05-16 12:45:24.958	info	Restart adapter system.adapter.zwave2.0 because enabled
host.raspberrypi	2021-05-16 12:45:24.957	info	instance system.adapter.zwave2.0 terminated with code NaN ()
host.raspberrypi	2021-05-16 12:45:24.956	warn	instance system.adapter.zwave2.0 terminated due to SIGABRT
host.raspberrypi	2021-05-16 12:45:24.950	error	Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory
info.0	2021-05-16 12:37:15.604	warn	(2791) State "info.0.uuid" has no existing object, this might lead to an error in future versions
zwave2.0	2021-05-16 12:32:01.208	info	(5010) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 12:31:58.911	info	instance system.adapter.zwave2.0 started with pid 5010
host.raspberrypi	2021-05-16 12:31:28.859	info	Restart adapter system.adapter.zwave2.0 because enabled
host.raspberrypi	2021-05-16 12:31:28.859	info	instance system.adapter.zwave2.0 terminated with code NaN ()
host.raspberrypi	2021-05-16 12:31:28.858	warn	instance system.adapter.zwave2.0 terminated due to SIGABRT
host.raspberrypi	2021-05-16 12:31:28.857	error	Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory