Probleme mit Serialport bei zwave2

[Esmax666]

@thomas-braun

Was.soll ich genau einstellen? Und wo?

Soll ich das auch installieren?
Install additional packages
On some systems it will be necessary to install additional packages. Therefore run the following on the console before installing the adapter:

apt-get install pkg-config libudev-dev

[Thomas Braun]

@esmax666 Wenn du das noch nicht getan hast...

[Esmax666]

@thomas-braun war schon da habe gerade geprüft

[Thomas Braun]

@esmax666 Wie sieht denn jetzt die Adapter config aus?

[Esmax666]

@thomas-braun wie immer gleich

[Thomas Braun]

@esmax666
Da kann ich nicht weiterhelfen. Hab den Adapter nicht im Einsatz. Aber die 17 Updates könntest du schon mal einspielen.

[Esmax666]

@thomas-braun schade. Man muss wahrscheinlich irgendwo usb driver installieren

Sonst wo hast du gehen das ich genau 17 update brauche?
Wie und was soll ich genau machen?

[Thomas Braun]

@esmax666 sagte in Test Adapter Z-Wave 2 v1.10.x:

Man muss wahrscheinlich irgendwo usb driver installieren

Windows User, oder? Der Treiber ist im Linux-Kernel schon drin.

Und die anstehenden Updates sehe ich links in deinem Screenshot.

iobroker update
iobroker upgrade

[Esmax666]

@thomas-braun ich weiss aber irgenwie erkennt zwave2 nicht usb0 und usb1

Die version hier sind auch richtig oder?

Type: js-controller
Title: JS controller
OS: linux
Available: 3.2.16
Installed: 3.2.16
Events: ↦15 / ↦13

pi@raspberrypi:~ $ node -v
v12.22.1
pi@raspberrypi:~ $ nodejs -v
v12.22.1
pi@raspberrypi:~ $ npm -v
6.14.12

[Thomas Braun]

@esmax666 Der Stick liegt auf dem device node /dev/ttyAMA0

[Esmax666]

@thomas-braun

Soll ich noch das machen?

https://medium.com/@thedyslexiccoder/how-to-update-nodejs-npm-on-a-raspberry-pi-4-da75cad4148c

[Thomas Braun]

@esmax666 Nein.

Die Anleitung wird so ohnehin nicht funktionieren, da fehlt noch Zeug davor.

[Esmax666]

@thomas-braun was meinst was feht

Sonst fur die zwave0 version gab das:

Raspberry Pi3 only: Activate GPIO UART
On Raspberry Pi 3, the UART is by default occupied by the bluetooth module. To activate it for use with a GPIO module, follow these steps:

sudo nano /boot/cmdline.txt

remove console=serial0,115200
save the file and close it
sudo nano /boot/config.txt
Look for each of the following lines. If they are commented out with a #, remove that. If they don't exist, add them to the end of the file:

dtoverlay=pi3-miniuart-bt
enable_uart=1
force_turbo=1
reboot

Aber das brauchen wir nicht mehr oder ? Hab nicht gesehen fur zwave2

[Thomas Braun]

@esmax666 Ich kenn den Adapter nicht. Mal in die readme geschaut? Da steht vielleicht was drin.

[AlCalzone]

@esmax666 Probier mal /dev/serial0, da bin ich beim Raspberry Pi 4 auch schon drüber gestolpert.

Ansonsten: ist das wirklich ein Z-Stick Gen5 oder doch ein Z-Stick Gen5 + ? Ich hab grob im Hinterkopf dass ersterer Probleme mit neueren USB-Schnittstellen macht.

[Esmax666]

@thomas-braun

Hab gerade geprüft auf raspi3 hatte ich eher /dev/ttyACM0

[Esmax666]

@alcalzone Z-Stick Gen5 + mit raspu hat das funktioniert mit acm0

[Esmax666]

@alcalzone

zwave2.0	2021-05-16 00:24:27.762	error	(23524) The Z-Wave driver could not be started: Error: No such file or directory, cannot open /dev/serial0
zwave2.0	2021-05-16 00:24:27.604	info	(23524) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 00:24:25.121	info	instance system.adapter.zwave2.0 started with pid 23524
host.raspberrypi	2021-05-16 00:24:22.595	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 00:24:21.999	info	(13067) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 00:24:21.998	info	(13067) terminating
zwave2.0	2021-05-16 00:24:21.996	info	(13067) Shutting down driver...
host.raspberrypi	2021-05-16 00:24:21.997	info	stopInstance system.adapter.zwave2.0 send kill signal
zwave2.0	2021-05-16 00:24:21.994	info	(13067) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 00:24:21.989	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 00:21:58.507	error	(13067) The Z-Wave driver could not be started: Error: No such file or directory, cannot open /dev/ttyACM0
zwave2.0	2021-05-16 00:21:58.367	info	(13067) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 00:21:56.051	info	instance system.adapter.zwave2.0 started with pid 13067
host.raspberrypi	2021-05-16 00:21:53.467	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
host.raspberrypi	2021-05-16 00:21:52.921	info	stopInstance system.adapter.zwave2.0 send kill signal
zwave2.0	2021-05-16 00:21:52.882	info	(12357) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 00:21:52.880	info	(12357) terminating
zwave2.0	2021-05-16 00:21:52.879	info	(12357) Shutting down driver...
zwave2.0	2021-05-16 00:21:52.877	info	(12357) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 00:21:52.859	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 00:21:49.469	error	(12357) The Z-Wave driver could not be started: Error: No such file or directory, c

[Esmax666]

@alcalzone

Soll ich das machen

https://forum.iobroker.net/post/629693

[Esmax666]

@alcalzone

Jetzt

zwave2.0	2021-05-16 07:55:56.747	error	(12308) The Z-Wave driver could not be started: Error: Is a directory, cannot open /dev/
zwave2.0	2021-05-16 07:55:56.584	info	(12308) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:55:54.148	info	instance system.adapter.zwave2.0 started with pid 12308
host.raspberrypi	2021-05-16 07:55:51.659	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:55:51.028	info	(6004) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:55:51.026	info	(6004) terminating
zwave2.0	2021-05-16 07:55:51.025	info	(6004) Shutting down driver...
zwave2.0	2021-05-16 07:55:51.023	info	(6004) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:55:51.022	info	stopInstance system.adapter.zwave2.0 send kill signal
host.raspberrypi	2021-05-16 07:55:51.014	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 07:54:38.393	info	(6004) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:54:35.967	info	instance system.adapter.zwave2.0 started with pid 6004
host.raspberrypi	2021-05-16 07:54:33.559	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:54:32.824	info	(21886) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:54:32.822	info	(21886) terminating
zwave2.0	2021-05-16 07:54:32.820	info	(21886) Shutting down driver...
zwave2.0	2021-05-16 07:54:32.812	info	(21886) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:54:32.796	info	stopInstance system.adapter.zwave2.0 send kill signal
host.raspberrypi	2021-05-16 07:54:32.776	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
info.0	2021-05-16 07:49:56.003	warn	(2765) State "info.0.uuid" has no existing object, this might lead to an error in future versions
zwave2.0	2021-05-16 07:44:28.868	info	(21886) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:44:26.457	info	instance system.adapter.zwave2.0 started with pid 21886
host.raspberrypi	2021-05-16 07:44:24.074	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:44:23.304	info	(4553) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:44:23.303	info	(4553) terminating
zwave2.0	2021-05-16 07:44:23.301	info	(4553) Shutting down driver...
zwave2.0	2021-05-16 07:44:23.294	info	(4553) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:44:23.292	info	stopInstance system.adapter.zwave2.0 send kill signal

Version