Probleme mit Serialport bei zwave2
-
@alcalzone said in Probleme mit Serialport bei zwave2:
/dev/serial0
/dev/serial0 hatte ich nicht als Vorschlag
ich habe das bekommen (sorry ich hatte früher dein Antwort nicht gesehen)
pi@raspberrypi:~ $ cd /opt/iobroker/node_modules/iobroker.zwave2 pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js - -force --logs 2021-05-20 20:48:19.307 - error: zwave2.0 (23655) adapter disabled 2021-05-20 20:48:19.334 - info: zwave2.0 (23655) starting. Version 1.9.3 in /op t/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 20:48:19.420 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚██ ███╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚═ ═══╝ ╚══════╝ 20:48:19.426 DRIVER version 7.4.0 20:48:19.428 CONFIG version 7.4.0 20:48:19.429 DRIVER 20:48:19.430 DRIVER starting driver... 20:48:19.461 DRIVER opening serial port /dev/serial0 20:48:19.480 DRIVER serial port opened 20:48:19.481 SERIAL » [NAK] (0x15) 20:48:20.987 DRIVER loading configuration... 20:48:22.527 DRIVER beginning interview... 20:48:22.529 DRIVER added request handler for AddNodeToNetwork (0x4a)... 1 registered 20:48:22.530 DRIVER added request handler for RemoveNodeFromNetwork (0x4b)... 1 registered 20:48:22.530 DRIVER added request handler for ReplaceFailedNode (0x63)... 1 registered 20:48:22.532 CNTRLR beginning interview... 20:48:22.533 CNTRLR querying version info... 20:48:22.725 SERIAL » 0x01030015e9 (5 bytes) 20:48:22.729 DRIVER » [REQ] [GetControllerVersion] 20:48:23.737 CNTRLR Failed to execute controller command after 1/3 attempts. Scheduling next try i n 100 ms. 20:48:23.841 SERIAL » 0x01030015e9 (5 bytes) 20:48:23.843 DRIVER » [REQ] [GetControllerVersion] 20:48:24.847 CNTRLR Failed to execute controller command after 2/3 attempts. Scheduling next try i n 1100 ms. 20:48:25.950 SERIAL » 0x01030015e9 (5 bytes) 20:48:25.951 DRIVER » [REQ] [GetControllerVersion] 20:48:26.968 DRIVER Failed to initialize the driver: Timeout while waiting for an ACK from the con troller 2021-05-20 20:48:26.970 - error: zwave2.0 (23655) Failed to initialize the driver: Timeout while waiting for an ACK from the controller 2021-05-20 20:48:26.972 - error: zwave2.0 (23655) Restarting the adapter in a second... 20:48:26.974 DRIVER destroying driver instance... 2021-05-20 20:48:27.975 - info: zwave2.0 (23655) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2021-05-20 20:48:28.501 - info: zwave2.0 (23655) Shutting down driver... pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ ^C pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ dmesg -T [Do Mai 20 20:35:49 2021] Booting Linux on physical CPU 0x0 [Do Mai 20 20:35:49 2021] Linux version 5.10.17-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1414 SMP Fri Apr 30 13:20:47 BST 2021 [Do Mai 20 20:35:49 2021] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [Do Mai 20 20:35:49 2021] CPU: div instructions available: patching division code [Do Mai 20 20:35:49 2021] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [Do Mai 20 20:35:49 2021] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [Do Mai 20 20:35:49 2021] Memory policy: Data cache writealloc [Do Mai 20 20:35:49 2021] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [Do Mai 20 20:35:49 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Do Mai 20 20:35:49 2021] Zone ranges: [Do Mai 20 20:35:49 2021] DMA [mem 0x0000000000000000-0x000000002fffffff] [Do Mai 20 20:35:49 2021] Normal empty [Do Mai 20 20:35:49 2021] HighMem [mem 0x0000000030000000-0x00000001ffffffff] [Do Mai 20 20:35:49 2021] Movable zone start for each node [Do Mai 20 20:35:49 2021] Early memory node ranges [Do Mai 20 20:35:49 2021] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [Do Mai 20 20:35:49 2021] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [Do Mai 20 20:35:49 2021] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [Do Mai 20 20:35:49 2021] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [Do Mai 20 20:35:49 2021] On node 0 totalpages: 2061056 [Do Mai 20 20:35:49 2021] DMA zone: 2304 pages used for memmap [Do Mai 20 20:35:49 2021] DMA zone: 0 pages reserved [Do Mai 20 20:35:49 2021] DMA zone: 196608 pages, LIFO batch:63 [Do Mai 20 20:35:49 2021] HighMem zone: 1864448 pages, LIFO batch:63 [Do Mai 20 20:35:49 2021] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [Do Mai 20 20:35:49 2021] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [Do Mai 20 20:35:49 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Do Mai 20 20:35:49 2021] Built 1 zonelists, mobility grouping on. Total pages: 2058752 [Do Mai 20 20:35:49 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:1B:22:9D vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=c7534f19-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Do Mai 20 20:35:49 2021] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [Do Mai 20 20:35:49 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Do Mai 20 20:35:49 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Do Mai 20 20:35:49 2021] mem auto-init: stack:off, heap alloc:off, heap free:off [Do Mai 20 20:35:49 2021] software IO TLB: mapped [mem 0x0000000014c00000-0x0000000018c00000] (64MB) [Do Mai 20 20:35:49 2021] Memory: 7799068K/8244224K available (10240K kernel code, 1358K rwdata, 3160K rodata, 2048K init, 890K bss, 183012K reserved, 262144K cma-reserved, 7457792K highmem) [Do Mai 20 20:35:49 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Do Mai 20 20:35:49 2021] ftrace: allocating 33942 entries in 67 pages [Do Mai 20 20:35:49 2021] ftrace: allocated 67 pages with 3 groups [Do Mai 20 20:35:49 2021] rcu: Hierarchical RCU implementation. [Do Mai 20 20:35:49 2021] Rude variant of Tasks RCU enabled. [Do Mai 20 20:35:49 2021] Tracing variant of Tasks RCU enabled. [Do Mai 20 20:35:49 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Do Mai 20 20:35:49 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Do Mai 20 20:35:49 2021] GIC: Using split EOI/Deactivate mode [Do Mai 20 20:35:49 2021] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0 [Do Mai 20 20:35:49 2021] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [Do Mai 20 20:35:49 2021] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [Do Mai 20 20:35:49 2021] bcm2835: system timer (irq = 25) [Do Mai 20 20:35:49 2021] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [Do Mai 20 20:35:49 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [Do Mai 20 20:35:49 2021] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [Do Mai 20 20:35:49 2021] Switching to timer-based delay loop, resolution 18ns [Do Mai 20 20:35:49 2021] Console: colour dummy device 80x30 [Do Mai 20 20:35:49 2021] printk: console [tty1] enabled [Do Mai 20 20:35:49 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [Do Mai 20 20:35:49 2021] pid_max: default: 32768 minimum: 301 [Do Mai 20 20:35:49 2021] LSM: Security Framework initializing [Do Mai 20 20:35:49 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Do Mai 20 20:35:49 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Do Mai 20 20:35:49 2021] Disabling memory control group subsystem [Do Mai 20 20:35:49 2021] CPU: Testing write buffer coherency: ok [Do Mai 20 20:35:49 2021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Do Mai 20 20:35:49 2021] Setting up static identity map for 0x200000 - 0x20003c [Do Mai 20 20:35:49 2021] rcu: Hierarchical SRCU implementation. [Do Mai 20 20:35:49 2021] smp: Bringing up secondary CPUs ... [Do Mai 20 20:35:49 2021] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Do Mai 20 20:35:49 2021] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Do Mai 20 20:35:49 2021] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Do Mai 20 20:35:49 2021] smp: Brought up 1 node, 4 CPUs [Do Mai 20 20:35:49 2021] SMP: Total of 4 processors activated (432.00 BogoMIPS). [Do Mai 20 20:35:49 2021] CPU: All CPU(s) started in HYP mode. [Do Mai 20 20:35:49 2021] CPU: Virtualization extensions available. [Do Mai 20 20:35:49 2021] devtmpfs: initialized [Do Mai 20 20:35:49 2021] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [Do Mai 20 20:35:49 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Do Mai 20 20:35:49 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Do Mai 20 20:35:49 2021] pinctrl core: initialized pinctrl subsystem [Do Mai 20 20:35:49 2021] NET: Registered protocol family 16 [Do Mai 20 20:35:49 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations [Do Mai 20 20:35:49 2021] audit: initializing netlink subsys (disabled) [Do Mai 20 20:35:49 2021] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [Do Mai 20 20:35:49 2021] thermal_sys: Registered thermal governor 'step_wise' [Do Mai 20 20:35:49 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Do Mai 20 20:35:49 2021] hw-breakpoint: maximum watchpoint size is 8 bytes. [Do Mai 20 20:35:49 2021] Serial: AMBA PL011 UART driver [Do Mai 20 20:35:49 2021] bcm2835-mbox fe00b880.mailbox: mailbox enabled [Do Mai 20 20:35:49 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T13:45:52, variant start [Do Mai 20 20:35:49 2021] raspberrypi-firmware soc:firmware: Firmware hash is d7f29d96450abfc77cd6cf011af1faf1e03e5e56 [Do Mai 20 20:35:49 2021] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [Do Mai 20 20:35:49 2021] vgaarb: loaded [Do Mai 20 20:35:49 2021] SCSI subsystem initialized [Do Mai 20 20:35:49 2021] usbcore: registered new interface driver usbfs [Do Mai 20 20:35:49 2021] usbcore: registered new interface driver hub [Do Mai 20 20:35:49 2021] usbcore: registered new device driver usb [Do Mai 20 20:35:49 2021] usb_phy_generic phy: supply vcc not found, using dummy regulator [Do Mai 20 20:35:49 2021] clocksource: Switched to clocksource arch_sys_counter [Do Mai 20 20:35:50 2021] VFS: Disk quotas dquot_6.6.0 [Do Mai 20 20:35:50 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Do Mai 20 20:35:50 2021] FS-Cache: Loaded [Do Mai 20 20:35:50 2021] CacheFiles: Loaded [Do Mai 20 20:35:50 2021] NET: Registered protocol family 2 [Do Mai 20 20:35:50 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Do Mai 20 20:35:50 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Do Mai 20 20:35:50 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Do Mai 20 20:35:50 2021] TCP: Hash tables configured (established 8192 bind 8192) [Do Mai 20 20:35:50 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Do Mai 20 20:35:50 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Do Mai 20 20:35:50 2021] NET: Registered protocol family 1 [Do Mai 20 20:35:50 2021] RPC: Registered named UNIX socket transport module. [Do Mai 20 20:35:50 2021] RPC: Registered udp transport module. [Do Mai 20 20:35:50 2021] RPC: Registered tcp transport module. [Do Mai 20 20:35:50 2021] RPC: Registered tcp NFSv4.1 backchannel transport module. [Do Mai 20 20:35:50 2021] PCI: CLS 0 bytes, default 64 [Do Mai 20 20:35:50 2021] Initialise system trusted keyrings [Do Mai 20 20:35:50 2021] workingset: timestamp_bits=14 max_order=21 bucket_order=7 [Do Mai 20 20:35:50 2021] zbud: loaded [Do Mai 20 20:35:50 2021] FS-Cache: Netfs 'nfs' registered for caching [Do Mai 20 20:35:50 2021] NFS: Registering the id_resolver key type [Do Mai 20 20:35:50 2021] Key type id_resolver registered [Do Mai 20 20:35:50 2021] Key type id_legacy registered [Do Mai 20 20:35:50 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Do Mai 20 20:35:50 2021] Key type asymmetric registered [Do Mai 20 20:35:50 2021] Asymmetric key parser 'x509' registered [Do Mai 20 20:35:50 2021] bounce: pool size: 64 pages [Do Mai 20 20:35:50 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Do Mai 20 20:35:50 2021] io scheduler mq-deadline registered [Do Mai 20 20:35:50 2021] io scheduler kyber registered [Do Mai 20 20:35:50 2021] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [Do Mai 20 20:35:50 2021] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [Do Mai 20 20:35:50 2021] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [Do Mai 20 20:35:50 2021] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [Do Mai 20 20:35:50 2021] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [Do Mai 20 20:35:50 2021] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [Do Mai 20 20:35:50 2021] pci_bus 0000:00: root bus resource [bus 00-ff] [Do Mai 20 20:35:50 2021] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [Do Mai 20 20:35:50 2021] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [Do Mai 20 20:35:50 2021] pci 0000:00:00.0: PME# supported from D0 D3hot [Do Mai 20 20:35:50 2021] PCI: bus0: Fast back to back transfers disabled [Do Mai 20 20:35:50 2021] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [Do Mai 20 20:35:50 2021] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [Do Mai 20 20:35:50 2021] pci 0000:01:00.0: PME# supported from D0 D3hot [Do Mai 20 20:35:50 2021] PCI: bus1: Fast back to back transfers disabled [Do Mai 20 20:35:50 2021] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [Do Mai 20 20:35:50 2021] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [Do Mai 20 20:35:50 2021] pci 0000:00:00.0: PCI bridge to [bus 01] [Do Mai 20 20:35:50 2021] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [Do Mai 20 20:35:50 2021] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [Do Mai 20 20:35:50 2021] pcieport 0000:00:00.0: PME: Signaling with IRQ 63 [Do Mai 20 20:35:50 2021] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [Do Mai 20 20:35:50 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Do Mai 20 20:35:50 2021] iproc-rng200 fe104000.rng: hwrng registered [Do Mai 20 20:35:50 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) [Do Mai 20 20:35:50 2021] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [Do Mai 20 20:35:50 2021] brd: module loaded [Do Mai 20 20:35:50 2021] loop: module loaded [Do Mai 20 20:35:50 2021] Loading iSCSI transport class v2.0-870. [Do Mai 20 20:35:50 2021] libphy: Fixed MDIO Bus: probed [Do Mai 20 20:35:50 2021] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [Do Mai 20 20:35:50 2021] libphy: bcmgenet MII bus: probed [Do Mai 20 20:35:50 2021] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [Do Mai 20 20:35:50 2021] usbcore: registered new interface driver r8152 [Do Mai 20 20:35:50 2021] usbcore: registered new interface driver lan78xx [Do Mai 20 20:35:50 2021] usbcore: registered new interface driver smsc95xx [Do Mai 20 20:35:50 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Do Mai 20 20:35:50 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [Do Mai 20 20:35:50 2021] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [Do Mai 20 20:35:50 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Do Mai 20 20:35:50 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Do Mai 20 20:35:50 2021] usb usb1: Product: xHCI Host Controller [Do Mai 20 20:35:50 2021] usb usb1: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [Do Mai 20 20:35:50 2021] usb usb1: SerialNumber: 0000:01:00.0 [Do Mai 20 20:35:50 2021] hub 1-0:1.0: USB hub found [Do Mai 20 20:35:50 2021] hub 1-0:1.0: 1 port detected [Do Mai 20 20:35:50 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Do Mai 20 20:35:50 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [Do Mai 20 20:35:50 2021] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [Do Mai 20 20:35:50 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [Do Mai 20 20:35:50 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Do Mai 20 20:35:50 2021] usb usb2: Product: xHCI Host Controller [Do Mai 20 20:35:50 2021] usb usb2: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [Do Mai 20 20:35:50 2021] usb usb2: SerialNumber: 0000:01:00.0 [Do Mai 20 20:35:50 2021] hub 2-0:1.0: USB hub found [Do Mai 20 20:35:50 2021] hub 2-0:1.0: 4 ports detected [Do Mai 20 20:35:50 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Do Mai 20 20:35:50 2021] dwc_otg: FIQ enabled [Do Mai 20 20:35:50 2021] dwc_otg: NAK holdoff enabled [Do Mai 20 20:35:50 2021] dwc_otg: FIQ split-transaction FSM enabled [Do Mai 20 20:35:50 2021] Module dwc_common_port init [Do Mai 20 20:35:50 2021] usbcore: registered new interface driver uas [Do Mai 20 20:35:50 2021] usbcore: registered new interface driver usb-storage [Do Mai 20 20:35:50 2021] mousedev: PS/2 mouse device common for all mice [Do Mai 20 20:35:50 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Do Mai 20 20:35:50 2021] sdhci: Secure Digital Host Controller Interface driver [Do Mai 20 20:35:50 2021] sdhci: Copyright(c) Pierre Ossman [Do Mai 20 20:35:50 2021] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [Do Mai 20 20:35:50 2021] sdhci-pltfm: SDHCI platform and OF driver helper [Do Mai 20 20:35:50 2021] ledtrig-cpu: registered to indicate activity on CPUs [Do Mai 20 20:35:50 2021] hid: raw HID events driver (C) Jiri Kosina [Do Mai 20 20:35:50 2021] usbcore: registered new interface driver usbhid [Do Mai 20 20:35:50 2021] usbhid: USB HID core driver [Do Mai 20 20:35:50 2021] Initializing XFRM netlink socket [Do Mai 20 20:35:50 2021] NET: Registered protocol family 17 [Do Mai 20 20:35:50 2021] Key type dns_resolver registered [Do Mai 20 20:35:50 2021] Registering SWP/SWPB emulation handler [Do Mai 20 20:35:50 2021] registered taskstats version 1 [Do Mai 20 20:35:50 2021] Loading compiled-in X.509 certificates [Do Mai 20 20:35:50 2021] Key type ._fscrypt registered [Do Mai 20 20:35:50 2021] Key type .fscrypt registered [Do Mai 20 20:35:50 2021] Key type fscrypt-provisioning registered [Do Mai 20 20:35:50 2021] uart-pl011 fe201000.serial: there is not valid maps for state default [Do Mai 20 20:35:50 2021] uart-pl011 fe201000.serial: cts_event_workaround enabled [Do Mai 20 20:35:50 2021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [Do Mai 20 20:35:50 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Do Mai 20 20:35:50 2021] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550 [Do Mai 20 20:35:50 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Do Mai 20 20:35:50 2021] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Do Mai 20 20:35:50 2021] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [Do Mai 20 20:35:50 2021] of_cfs_init [Do Mai 20 20:35:50 2021] of_cfs_init: OK [Do Mai 20 20:35:50 2021] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Do Mai 20 20:35:50 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Mai 20 20:35:50 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Mai 20 20:35:50 2021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Do Mai 20 20:35:50 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Mai 20 20:35:50 2021] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [Do Mai 20 20:35:50 2021] Waiting for root device PARTUUID=c7534f19-02... [Do Mai 20 20:35:50 2021] random: fast init done [Do Mai 20 20:35:50 2021] mmc1: new high speed SDIO card at address 0001 [Do Mai 20 20:35:50 2021] usb 1-1: new high-speed USB device number 2 using xhci_hcd [Do Mai 20 20:35:51 2021] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [Do Mai 20 20:35:51 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [Do Mai 20 20:35:51 2021] usb 1-1: Product: USB2.0 Hub [Do Mai 20 20:35:51 2021] hub 1-1:1.0: USB hub found [Do Mai 20 20:35:51 2021] hub 1-1:1.0: 4 ports detected [Do Mai 20 20:35:51 2021] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [Do Mai 20 20:35:51 2021] usb 2-2: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [Do Mai 20 20:35:51 2021] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Do Mai 20 20:35:51 2021] usb 2-2: Product: Ultra [Do Mai 20 20:35:51 2021] usb 2-2: Manufacturer: SanDisk [Do Mai 20 20:35:51 2021] usb 2-2: SerialNumber: 4C530000211114109264 [Do Mai 20 20:35:51 2021] usb-storage 2-2:1.0: USB Mass Storage device detected [Do Mai 20 20:35:51 2021] scsi host0: usb-storage 2-2:1.0 [Do Mai 20 20:35:52 2021] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6 [Do Mai 20 20:35:52 2021] sd 0:0:0:0: [sda] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB) [Do Mai 20 20:35:52 2021] sd 0:0:0:0: [sda] Write Protect is off [Do Mai 20 20:35:52 2021] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [Do Mai 20 20:35:52 2021] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [Do Mai 20 20:35:52 2021] sda: sda1 sda2 [Do Mai 20 20:35:52 2021] sd 0:0:0:0: [sda] Attached SCSI removable disk [Do Mai 20 20:35:52 2021] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Do Mai 20 20:35:52 2021] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Do Mai 20 20:35:52 2021] devtmpfs: mounted [Do Mai 20 20:35:52 2021] Freeing unused kernel memory: 2048K [Do Mai 20 20:35:52 2021] Run /sbin/init as init process [Do Mai 20 20:35:52 2021] with arguments: [Do Mai 20 20:35:52 2021] /sbin/init [Do Mai 20 20:35:52 2021] splash [Do Mai 20 20:35:52 2021] with environment: [Do Mai 20 20:35:52 2021] HOME=/ [Do Mai 20 20:35:52 2021] TERM=linux [Do Mai 20 20:35:52 2021] systemd[1]: System time before build time, advancing clock. [Do Mai 20 20:35:52 2021] NET: Registered protocol family 10 [Do Mai 20 20:35:52 2021] Segment Routing with IPv6 [Do Mai 20 20:35:52 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [Do Mai 20 20:35:52 2021] systemd[1]: Detected architecture arm. [Do Mai 20 20:35:52 2021] systemd[1]: Set hostname to <raspberrypi>. [Do Mai 20 20:35:53 2021] systemd[1]: /lib/systemd/system/xrdp.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp.pid → /run/xrdp/xrdp.pid; please update the unit file accordingly. [Do Mai 20 20:35:53 2021] systemd[1]: /lib/systemd/system/xrdp-sesman.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp-sesman.pid → /run/xrdp/xrdp-sesman.pid; please update the unit file accordingly. [Do Mai 20 20:35:53 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Mai 20 20:35:53 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Mai 20 20:35:53 2021] systemd[1]: Listening on Journal Audit Socket. [Do Mai 20 20:35:53 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Mai 20 20:35:53 2021] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Do Mai 20 20:35:53 2021] systemd[1]: Listening on Syslog Socket. [Do Mai 20 20:35:53 2021] systemd[1]: Reached target Swap. [Do Mai 20 20:35:53 2021] systemd[1]: Listening on udev Control Socket. [Do Mai 20 20:35:54 2021] i2c /dev entries driver [Do Mai 20 20:35:54 2021] EXT4-fs (sda2): re-mounted. Opts: (null) [Do Mai 20 20:35:54 2021] systemd-journald[117]: Received request to flush runtime journal from PID 1 [Do Mai 20 20:35:55 2021] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [Do Mai 20 20:35:55 2021] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [Do Mai 20 20:35:55 2021] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [Do Mai 20 20:35:55 2021] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [Do Mai 20 20:35:55 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:35:55 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Do Mai 20 20:35:55 2021] [vc_sm_connected_init]: start [Do Mai 20 20:35:55 2021] [vc_sm_connected_init]: installed successfully [Do Mai 20 20:35:55 2021] mc: Linux media interface: v0.10 [Do Mai 20 20:35:55 2021] videodev: Linux video capture interface: v2.00 [Do Mai 20 20:35:55 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:35:55 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:35:55 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:35:55 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:35:55 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:35:55 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:35:55 2021] bcm2835_audio bcm2835_audio: card created with 8 channels [Do Mai 20 20:35:55 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Do Mai 20 20:35:55 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Do Mai 20 20:35:55 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Do Mai 20 20:35:55 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Do Mai 20 20:35:55 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Do Mai 20 20:35:55 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Do Mai 20 20:35:55 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Do Mai 20 20:35:55 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Do Mai 20 20:35:55 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Do Mai 20 20:35:55 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Do Mai 20 20:35:55 2021] brcmfmac: F1 signature read @0x18000000=0x15264345 [Do Mai 20 20:35:55 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Do Mai 20 20:35:55 2021] usbcore: registered new interface driver brcmfmac [Do Mai 20 20:35:55 2021] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [Do Mai 20 20:35:55 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [Do Mai 20 20:35:56 2021] sd 0:0:0:0: Attached scsi generic sg0 type 0 [Do Mai 20 20:35:56 2021] [drm] No displays found. Consider forcing hotplug if HDMI is attached [Do Mai 20 20:35:56 2021] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [Do Mai 20 20:35:56 2021] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [Do Mai 20 20:35:56 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Do Mai 20 20:35:56 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [Do Mai 20 20:35:57 2021] random: crng init done [Do Mai 20 20:35:57 2021] random: 7 urandom warning(s) missed due to ratelimiting [Do Mai 20 20:35:58 2021] uart-pl011 fe201000.serial: no DMA platform data [Do Mai 20 20:35:58 2021] 8021q: 802.1Q VLAN Support v1.8 [Do Mai 20 20:35:59 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS [Do Mai 20 20:35:59 2021] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [Do Mai 20 20:35:59 2021] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [Do Mai 20 20:35:59 2021] bcmgenet fd580000.ethernet eth0: Link is Down [Do Mai 20 20:36:03 2021] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [Do Mai 20 20:36:03 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Do Mai 20 20:36:04 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [Do Mai 20 20:36:05 2021] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [Do Mai 20 20:36:05 2021] Bluetooth: Core ver 2.22 [Do Mai 20 20:36:05 2021] NET: Registered protocol family 31 [Do Mai 20 20:36:05 2021] Bluetooth: HCI device and connection manager initialized [Do Mai 20 20:36:05 2021] Bluetooth: HCI socket layer initialized [Do Mai 20 20:36:05 2021] Bluetooth: L2CAP socket layer initialized [Do Mai 20 20:36:05 2021] Bluetooth: SCO socket layer initialized [Do Mai 20 20:36:05 2021] Bluetooth: HCI UART driver ver 2.3 [Do Mai 20 20:36:05 2021] Bluetooth: HCI UART protocol H4 registered [Do Mai 20 20:36:05 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered [Do Mai 20 20:36:05 2021] Bluetooth: HCI UART protocol Broadcom registered [Do Mai 20 20:36:05 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Do Mai 20 20:36:05 2021] Bluetooth: BNEP filters: protocol multicast [Do Mai 20 20:36:05 2021] Bluetooth: BNEP socket layer initialized pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ -
@alcalzone said in Probleme mit Serialport bei zwave2:
cd /opt/iobroker/node_modules/iobroker.zwave2
node build/main.js --force --logshab jetzt neu gestartet und ich bekomme immer fehlter:
mit /dev/serial0/pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ cd /opt/iobroker/node_modules/iobroker.zwave2 pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-20 21:04:25.348 - error: zwave2.0 (31604) adapter disabled 2021-05-20 21:04:25.358 - info: zwave2.0 (31604) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 21:04:25.454 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 21:04:25.459 DRIVER version 7.4.0 21:04:25.460 CONFIG version 7.4.0 21:04:25.460 DRIVER 21:04:25.461 DRIVER starting driver... 21:04:25.489 DRIVER opening serial port /dev/serial0 21:04:25.508 DRIVER serial port opened 21:04:25.510 SERIAL » [NAK] (0x15) 21:04:27.018 DRIVER loading configuration... 21:04:28.184 DRIVER beginning interview... 21:04:28.185 DRIVER added request handler for AddNodeToNetwork (0x4a)... 1 registered 21:04:28.186 DRIVER added request handler for RemoveNodeFromNetwork (0x4b)... 1 registered 21:04:28.187 DRIVER added request handler for ReplaceFailedNode (0x63)... 1 registered 21:04:28.189 CNTRLR beginning interview... 21:04:28.189 CNTRLR querying version info... 21:04:28.369 SERIAL » 0x01030015e9 (5 bytes) 21:04:28.372 DRIVER » [REQ] [GetControllerVersion] 21:04:29.381 CNTRLR Failed to execute controller command after 1/3 attempts. Scheduling next try i n 100 ms. 21:04:29.485 SERIAL » 0x01030015e9 (5 bytes) 21:04:29.486 DRIVER » [REQ] [GetControllerVersion] 21:04:30.491 CNTRLR Failed to execute controller command after 2/3 attempts. Scheduling next try i n 1100 ms. 21:04:31.594 SERIAL » 0x01030015e9 (5 bytes) 21:04:31.596 DRIVER » [REQ] [GetControllerVersion] 21:04:32.616 DRIVER Failed to initialize the driver: Timeout while waiting for an ACK from the con troller 2021-05-20 21:04:32.617 - error: zwave2.0 (31604) Failed to initialize the driver: Timeout while waiting for an ACK from the controller 2021-05-20 21:04:32.619 - error: zwave2.0 (31604) Restarting the adapter in a second... 21:04:32.621 DRIVER destroying driver instance... 2021-05-20 21:04:33.622 - info: zwave2.0 (31604) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2021-05-20 21:04:34.183 - info: zwave2.0 (31604) Shutting down driver... pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $mit ttyAMA0 gibt er nicht so vile info, er ist blobiert
pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-20 21:07:32.803 - error: zwave2.0 (12803) adapter disabled 2021-05-20 21:07:32.813 - info: zwave2.0 (12803) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 21:07:32.893 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 21:07:32.897 DRIVER version 7.4.0 21:07:32.898 CONFIG version 7.4.0 21:07:32.899 DRIVER 21:07:32.900 DRIVER starting driver... 21:07:32.928 DRIVER opening serial port dev/ttyAMA0 21:07:32.951 DRIVER serial port errored: Error: No such file or directory, cannot open dev/ttyAMA0 21:07:32.953 DRIVER destroying driver instance... 2021-05-20 21:07:32.955 - error: zwave2.0 (12803) The Z-Wave driver could not be started: Error: No such file or directory, cannot open dev/ttyAMA0und das bekomme ich mit mesg -T (ich habe kurz davor die zwave usb stick raus und reingemacht
pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ dmesg -T [Do Mai 20 20:57:06 2021] Booting Linux on physical CPU 0x0 [Do Mai 20 20:57:06 2021] Linux version 5.10.17-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1414 SMP Fri Apr 30 13:20:47 BST 2021 [Do Mai 20 20:57:06 2021] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [Do Mai 20 20:57:06 2021] CPU: div instructions available: patching division code [Do Mai 20 20:57:06 2021] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [Do Mai 20 20:57:06 2021] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [Do Mai 20 20:57:06 2021] Memory policy: Data cache writealloc [Do Mai 20 20:57:06 2021] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [Do Mai 20 20:57:06 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Do Mai 20 20:57:06 2021] Zone ranges: [Do Mai 20 20:57:06 2021] DMA [mem 0x0000000000000000-0x000000002fffffff] [Do Mai 20 20:57:06 2021] Normal empty [Do Mai 20 20:57:06 2021] HighMem [mem 0x0000000030000000-0x00000001ffffffff] [Do Mai 20 20:57:06 2021] Movable zone start for each node [Do Mai 20 20:57:06 2021] Early memory node ranges [Do Mai 20 20:57:06 2021] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [Do Mai 20 20:57:06 2021] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [Do Mai 20 20:57:06 2021] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [Do Mai 20 20:57:06 2021] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [Do Mai 20 20:57:06 2021] On node 0 totalpages: 2061056 [Do Mai 20 20:57:06 2021] DMA zone: 2304 pages used for memmap [Do Mai 20 20:57:06 2021] DMA zone: 0 pages reserved [Do Mai 20 20:57:06 2021] DMA zone: 196608 pages, LIFO batch:63 [Do Mai 20 20:57:06 2021] HighMem zone: 1864448 pages, LIFO batch:63 [Do Mai 20 20:57:06 2021] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [Do Mai 20 20:57:06 2021] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [Do Mai 20 20:57:06 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Do Mai 20 20:57:06 2021] Built 1 zonelists, mobility grouping on. Total pages: 2058752 [Do Mai 20 20:57:06 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:1B:22:9D vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=c7534f19-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Do Mai 20 20:57:06 2021] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [Do Mai 20 20:57:06 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Do Mai 20 20:57:06 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Do Mai 20 20:57:06 2021] mem auto-init: stack:off, heap alloc:off, heap free:off [Do Mai 20 20:57:06 2021] software IO TLB: mapped [mem 0x0000000014c00000-0x0000000018c00000] (64MB) [Do Mai 20 20:57:06 2021] Memory: 7799068K/8244224K available (10240K kernel code, 1358K rwdata, 3160K rodata, 2048K init, 890K bss, 183012K reserved, 262144K cma-reserved, 7457792K highmem) [Do Mai 20 20:57:06 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Do Mai 20 20:57:06 2021] ftrace: allocating 33942 entries in 67 pages [Do Mai 20 20:57:06 2021] ftrace: allocated 67 pages with 3 groups [Do Mai 20 20:57:06 2021] rcu: Hierarchical RCU implementation. [Do Mai 20 20:57:06 2021] Rude variant of Tasks RCU enabled. [Do Mai 20 20:57:06 2021] Tracing variant of Tasks RCU enabled. [Do Mai 20 20:57:06 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Do Mai 20 20:57:06 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Do Mai 20 20:57:06 2021] GIC: Using split EOI/Deactivate mode [Do Mai 20 20:57:06 2021] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0 [Do Mai 20 20:57:06 2021] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [Do Mai 20 20:57:06 2021] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [Do Mai 20 20:57:06 2021] bcm2835: system timer (irq = 25) [Do Mai 20 20:57:06 2021] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [Do Mai 20 20:57:06 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [Do Mai 20 20:57:06 2021] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [Do Mai 20 20:57:06 2021] Switching to timer-based delay loop, resolution 18ns [Do Mai 20 20:57:06 2021] Console: colour dummy device 80x30 [Do Mai 20 20:57:06 2021] printk: console [tty1] enabled [Do Mai 20 20:57:06 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [Do Mai 20 20:57:06 2021] pid_max: default: 32768 minimum: 301 [Do Mai 20 20:57:06 2021] LSM: Security Framework initializing [Do Mai 20 20:57:06 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Do Mai 20 20:57:06 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Do Mai 20 20:57:06 2021] Disabling memory control group subsystem [Do Mai 20 20:57:06 2021] CPU: Testing write buffer coherency: ok [Do Mai 20 20:57:06 2021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Do Mai 20 20:57:06 2021] Setting up static identity map for 0x200000 - 0x20003c [Do Mai 20 20:57:06 2021] rcu: Hierarchical SRCU implementation. [Do Mai 20 20:57:06 2021] smp: Bringing up secondary CPUs ... [Do Mai 20 20:57:06 2021] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Do Mai 20 20:57:06 2021] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Do Mai 20 20:57:06 2021] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Do Mai 20 20:57:06 2021] smp: Brought up 1 node, 4 CPUs [Do Mai 20 20:57:06 2021] SMP: Total of 4 processors activated (432.00 BogoMIPS). [Do Mai 20 20:57:06 2021] CPU: All CPU(s) started in HYP mode. [Do Mai 20 20:57:06 2021] CPU: Virtualization extensions available. [Do Mai 20 20:57:06 2021] devtmpfs: initialized [Do Mai 20 20:57:06 2021] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [Do Mai 20 20:57:06 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Do Mai 20 20:57:06 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Do Mai 20 20:57:06 2021] pinctrl core: initialized pinctrl subsystem [Do Mai 20 20:57:06 2021] NET: Registered protocol family 16 [Do Mai 20 20:57:06 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations [Do Mai 20 20:57:06 2021] audit: initializing netlink subsys (disabled) [Do Mai 20 20:57:06 2021] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [Do Mai 20 20:57:06 2021] thermal_sys: Registered thermal governor 'step_wise' [Do Mai 20 20:57:06 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Do Mai 20 20:57:06 2021] hw-breakpoint: maximum watchpoint size is 8 bytes. [Do Mai 20 20:57:06 2021] Serial: AMBA PL011 UART driver [Do Mai 20 20:57:06 2021] bcm2835-mbox fe00b880.mailbox: mailbox enabled [Do Mai 20 20:57:06 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T13:45:52, variant start [Do Mai 20 20:57:06 2021] raspberrypi-firmware soc:firmware: Firmware hash is d7f29d96450abfc77cd6cf011af1faf1e03e5e56 [Do Mai 20 20:57:06 2021] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [Do Mai 20 20:57:06 2021] vgaarb: loaded [Do Mai 20 20:57:06 2021] SCSI subsystem initialized [Do Mai 20 20:57:06 2021] usbcore: registered new interface driver usbfs [Do Mai 20 20:57:06 2021] usbcore: registered new interface driver hub [Do Mai 20 20:57:06 2021] usbcore: registered new device driver usb [Do Mai 20 20:57:06 2021] usb_phy_generic phy: supply vcc not found, using dummy regulator [Do Mai 20 20:57:06 2021] clocksource: Switched to clocksource arch_sys_counter [Do Mai 20 20:57:07 2021] VFS: Disk quotas dquot_6.6.0 [Do Mai 20 20:57:07 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Do Mai 20 20:57:07 2021] FS-Cache: Loaded [Do Mai 20 20:57:07 2021] CacheFiles: Loaded [Do Mai 20 20:57:07 2021] NET: Registered protocol family 2 [Do Mai 20 20:57:07 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Do Mai 20 20:57:07 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Do Mai 20 20:57:07 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Do Mai 20 20:57:07 2021] TCP: Hash tables configured (established 8192 bind 8192) [Do Mai 20 20:57:07 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Do Mai 20 20:57:07 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Do Mai 20 20:57:07 2021] NET: Registered protocol family 1 [Do Mai 20 20:57:07 2021] RPC: Registered named UNIX socket transport module. [Do Mai 20 20:57:07 2021] RPC: Registered udp transport module. [Do Mai 20 20:57:07 2021] RPC: Registered tcp transport module. [Do Mai 20 20:57:07 2021] RPC: Registered tcp NFSv4.1 backchannel transport module. [Do Mai 20 20:57:07 2021] PCI: CLS 0 bytes, default 64 [Do Mai 20 20:57:07 2021] Initialise system trusted keyrings [Do Mai 20 20:57:07 2021] workingset: timestamp_bits=14 max_order=21 bucket_order=7 [Do Mai 20 20:57:07 2021] zbud: loaded [Do Mai 20 20:57:07 2021] FS-Cache: Netfs 'nfs' registered for caching [Do Mai 20 20:57:07 2021] NFS: Registering the id_resolver key type [Do Mai 20 20:57:07 2021] Key type id_resolver registered [Do Mai 20 20:57:07 2021] Key type id_legacy registered [Do Mai 20 20:57:07 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Do Mai 20 20:57:07 2021] Key type asymmetric registered [Do Mai 20 20:57:07 2021] Asymmetric key parser 'x509' registered [Do Mai 20 20:57:07 2021] bounce: pool size: 64 pages [Do Mai 20 20:57:07 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Do Mai 20 20:57:07 2021] io scheduler mq-deadline registered [Do Mai 20 20:57:07 2021] io scheduler kyber registered [Do Mai 20 20:57:07 2021] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [Do Mai 20 20:57:07 2021] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [Do Mai 20 20:57:07 2021] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [Do Mai 20 20:57:07 2021] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [Do Mai 20 20:57:07 2021] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [Do Mai 20 20:57:07 2021] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [Do Mai 20 20:57:07 2021] pci_bus 0000:00: root bus resource [bus 00-ff] [Do Mai 20 20:57:07 2021] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [Do Mai 20 20:57:07 2021] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [Do Mai 20 20:57:07 2021] pci 0000:00:00.0: PME# supported from D0 D3hot [Do Mai 20 20:57:07 2021] PCI: bus0: Fast back to back transfers disabled [Do Mai 20 20:57:07 2021] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [Do Mai 20 20:57:07 2021] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [Do Mai 20 20:57:07 2021] pci 0000:01:00.0: PME# supported from D0 D3hot [Do Mai 20 20:57:07 2021] PCI: bus1: Fast back to back transfers disabled [Do Mai 20 20:57:07 2021] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [Do Mai 20 20:57:07 2021] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [Do Mai 20 20:57:07 2021] pci 0000:00:00.0: PCI bridge to [bus 01] [Do Mai 20 20:57:07 2021] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [Do Mai 20 20:57:07 2021] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [Do Mai 20 20:57:07 2021] pcieport 0000:00:00.0: PME: Signaling with IRQ 63 [Do Mai 20 20:57:07 2021] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [Do Mai 20 20:57:07 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Do Mai 20 20:57:07 2021] iproc-rng200 fe104000.rng: hwrng registered [Do Mai 20 20:57:07 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) [Do Mai 20 20:57:07 2021] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [Do Mai 20 20:57:07 2021] brd: module loaded [Do Mai 20 20:57:07 2021] loop: module loaded [Do Mai 20 20:57:07 2021] Loading iSCSI transport class v2.0-870. [Do Mai 20 20:57:07 2021] libphy: Fixed MDIO Bus: probed [Do Mai 20 20:57:07 2021] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [Do Mai 20 20:57:07 2021] libphy: bcmgenet MII bus: probed [Do Mai 20 20:57:07 2021] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [Do Mai 20 20:57:07 2021] usbcore: registered new interface driver r8152 [Do Mai 20 20:57:07 2021] usbcore: registered new interface driver lan78xx [Do Mai 20 20:57:07 2021] usbcore: registered new interface driver smsc95xx [Do Mai 20 20:57:07 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Do Mai 20 20:57:07 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [Do Mai 20 20:57:07 2021] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [Do Mai 20 20:57:07 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Do Mai 20 20:57:07 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Do Mai 20 20:57:07 2021] usb usb1: Product: xHCI Host Controller [Do Mai 20 20:57:07 2021] usb usb1: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [Do Mai 20 20:57:07 2021] usb usb1: SerialNumber: 0000:01:00.0 [Do Mai 20 20:57:07 2021] hub 1-0:1.0: USB hub found [Do Mai 20 20:57:07 2021] hub 1-0:1.0: 1 port detected [Do Mai 20 20:57:07 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Do Mai 20 20:57:07 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [Do Mai 20 20:57:07 2021] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [Do Mai 20 20:57:07 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [Do Mai 20 20:57:07 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Do Mai 20 20:57:07 2021] usb usb2: Product: xHCI Host Controller [Do Mai 20 20:57:07 2021] usb usb2: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [Do Mai 20 20:57:07 2021] usb usb2: SerialNumber: 0000:01:00.0 [Do Mai 20 20:57:07 2021] hub 2-0:1.0: USB hub found [Do Mai 20 20:57:07 2021] hub 2-0:1.0: 4 ports detected [Do Mai 20 20:57:07 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Do Mai 20 20:57:07 2021] dwc_otg: FIQ enabled [Do Mai 20 20:57:07 2021] dwc_otg: NAK holdoff enabled [Do Mai 20 20:57:07 2021] dwc_otg: FIQ split-transaction FSM enabled [Do Mai 20 20:57:07 2021] Module dwc_common_port init [Do Mai 20 20:57:07 2021] usbcore: registered new interface driver uas [Do Mai 20 20:57:07 2021] usbcore: registered new interface driver usb-storage [Do Mai 20 20:57:07 2021] mousedev: PS/2 mouse device common for all mice [Do Mai 20 20:57:07 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Do Mai 20 20:57:07 2021] sdhci: Secure Digital Host Controller Interface driver [Do Mai 20 20:57:07 2021] sdhci: Copyright(c) Pierre Ossman [Do Mai 20 20:57:07 2021] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [Do Mai 20 20:57:07 2021] sdhci-pltfm: SDHCI platform and OF driver helper [Do Mai 20 20:57:07 2021] ledtrig-cpu: registered to indicate activity on CPUs [Do Mai 20 20:57:07 2021] hid: raw HID events driver (C) Jiri Kosina [Do Mai 20 20:57:07 2021] usbcore: registered new interface driver usbhid [Do Mai 20 20:57:07 2021] usbhid: USB HID core driver [Do Mai 20 20:57:07 2021] Initializing XFRM netlink socket [Do Mai 20 20:57:07 2021] NET: Registered protocol family 17 [Do Mai 20 20:57:07 2021] Key type dns_resolver registered [Do Mai 20 20:57:07 2021] Registering SWP/SWPB emulation handler [Do Mai 20 20:57:07 2021] registered taskstats version 1 [Do Mai 20 20:57:07 2021] Loading compiled-in X.509 certificates [Do Mai 20 20:57:07 2021] Key type ._fscrypt registered [Do Mai 20 20:57:07 2021] Key type .fscrypt registered [Do Mai 20 20:57:07 2021] Key type fscrypt-provisioning registered [Do Mai 20 20:57:07 2021] uart-pl011 fe201000.serial: there is not valid maps for state default [Do Mai 20 20:57:07 2021] uart-pl011 fe201000.serial: cts_event_workaround enabled [Do Mai 20 20:57:07 2021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [Do Mai 20 20:57:07 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Do Mai 20 20:57:07 2021] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550 [Do Mai 20 20:57:07 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Do Mai 20 20:57:07 2021] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Do Mai 20 20:57:07 2021] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [Do Mai 20 20:57:07 2021] of_cfs_init [Do Mai 20 20:57:07 2021] of_cfs_init: OK [Do Mai 20 20:57:07 2021] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Do Mai 20 20:57:07 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Mai 20 20:57:07 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Mai 20 20:57:07 2021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Do Mai 20 20:57:07 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Mai 20 20:57:07 2021] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [Do Mai 20 20:57:07 2021] Waiting for root device PARTUUID=c7534f19-02... [Do Mai 20 20:57:07 2021] random: fast init done [Do Mai 20 20:57:07 2021] mmc1: new high speed SDIO card at address 0001 [Do Mai 20 20:57:07 2021] usb 1-1: new high-speed USB device number 2 using xhci_hcd [Do Mai 20 20:57:08 2021] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [Do Mai 20 20:57:08 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [Do Mai 20 20:57:08 2021] usb 1-1: Product: USB2.0 Hub [Do Mai 20 20:57:08 2021] hub 1-1:1.0: USB hub found [Do Mai 20 20:57:08 2021] hub 1-1:1.0: 4 ports detected [Do Mai 20 20:57:08 2021] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [Do Mai 20 20:57:08 2021] usb 2-2: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [Do Mai 20 20:57:08 2021] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Do Mai 20 20:57:08 2021] usb 2-2: Product: Ultra [Do Mai 20 20:57:08 2021] usb 2-2: Manufacturer: SanDisk [Do Mai 20 20:57:08 2021] usb 2-2: SerialNumber: 4C530000211114109264 [Do Mai 20 20:57:08 2021] usb-storage 2-2:1.0: USB Mass Storage device detected [Do Mai 20 20:57:08 2021] scsi host0: usb-storage 2-2:1.0 [Do Mai 20 20:57:09 2021] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6 [Do Mai 20 20:57:09 2021] sd 0:0:0:0: [sda] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB) [Do Mai 20 20:57:09 2021] sd 0:0:0:0: [sda] Write Protect is off [Do Mai 20 20:57:09 2021] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [Do Mai 20 20:57:09 2021] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [Do Mai 20 20:57:09 2021] sda: sda1 sda2 [Do Mai 20 20:57:09 2021] sd 0:0:0:0: [sda] Attached SCSI removable disk [Do Mai 20 20:57:09 2021] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Do Mai 20 20:57:09 2021] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Do Mai 20 20:57:09 2021] devtmpfs: mounted [Do Mai 20 20:57:09 2021] Freeing unused kernel memory: 2048K [Do Mai 20 20:57:09 2021] Run /sbin/init as init process [Do Mai 20 20:57:09 2021] with arguments: [Do Mai 20 20:57:09 2021] /sbin/init [Do Mai 20 20:57:09 2021] splash [Do Mai 20 20:57:09 2021] with environment: [Do Mai 20 20:57:09 2021] HOME=/ [Do Mai 20 20:57:09 2021] TERM=linux [Do Mai 20 20:57:09 2021] systemd[1]: System time before build time, advancing clock. [Do Mai 20 20:57:09 2021] NET: Registered protocol family 10 [Do Mai 20 20:57:09 2021] Segment Routing with IPv6 [Do Mai 20 20:57:09 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [Do Mai 20 20:57:09 2021] systemd[1]: Detected architecture arm. [Do Mai 20 20:57:09 2021] systemd[1]: Set hostname to <raspberrypi>. [Do Mai 20 20:57:10 2021] systemd[1]: /lib/systemd/system/xrdp.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp.pid → /run/xrdp/xrdp.pid; please update the unit file accordingly. [Do Mai 20 20:57:10 2021] systemd[1]: /lib/systemd/system/xrdp-sesman.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp-sesman.pid → /run/xrdp/xrdp-sesman.pid; please update the unit file accordingly. [Do Mai 20 20:57:10 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Mai 20 20:57:10 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Mai 20 20:57:10 2021] systemd[1]: Created slice system-systemd\x2dfsck.slice. [Do Mai 20 20:57:10 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Mai 20 20:57:10 2021] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Do Mai 20 20:57:10 2021] systemd[1]: Listening on initctl Compatibility Named Pipe. [Do Mai 20 20:57:10 2021] systemd[1]: Listening on fsck to fsckd communication Socket. [Do Mai 20 20:57:10 2021] systemd[1]: Created slice system-getty.slice. [Do Mai 20 20:57:11 2021] i2c /dev entries driver [Do Mai 20 20:57:11 2021] EXT4-fs (sda2): re-mounted. Opts: (null) [Do Mai 20 20:57:11 2021] systemd-journald[117]: Received request to flush runtime journal from PID 1 [Do Mai 20 20:57:12 2021] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [Do Mai 20 20:57:12 2021] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [Do Mai 20 20:57:12 2021] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [Do Mai 20 20:57:12 2021] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [Do Mai 20 20:57:12 2021] mc: Linux media interface: v0.10 [Do Mai 20 20:57:12 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:57:12 2021] bcm2835_audio bcm2835_audio: card created with 8 channels [Do Mai 20 20:57:12 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:57:12 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Do Mai 20 20:57:12 2021] [vc_sm_connected_init]: start [Do Mai 20 20:57:12 2021] [vc_sm_connected_init]: installed successfully [Do Mai 20 20:57:12 2021] videodev: Linux video capture interface: v2.00 [Do Mai 20 20:57:12 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:57:12 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:57:12 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Do Mai 20 20:57:12 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Do Mai 20 20:57:12 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Do Mai 20 20:57:12 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Do Mai 20 20:57:12 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Do Mai 20 20:57:12 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Do Mai 20 20:57:12 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Do Mai 20 20:57:12 2021] [drm] No displays found. Consider forcing hotplug if HDMI is attached [Do Mai 20 20:57:12 2021] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [Do Mai 20 20:57:12 2021] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [Do Mai 20 20:57:12 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Do Mai 20 20:57:12 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Do Mai 20 20:57:12 2021] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [Do Mai 20 20:57:12 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Do Mai 20 20:57:12 2021] sd 0:0:0:0: Attached scsi generic sg0 type 0 [Do Mai 20 20:57:13 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Do Mai 20 20:57:13 2021] brcmfmac: F1 signature read @0x18000000=0x15264345 [Do Mai 20 20:57:13 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Do Mai 20 20:57:13 2021] usbcore: registered new interface driver brcmfmac [Do Mai 20 20:57:13 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [Do Mai 20 20:57:13 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Do Mai 20 20:57:13 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [Do Mai 20 20:57:15 2021] random: crng init done [Do Mai 20 20:57:15 2021] random: 7 urandom warning(s) missed due to ratelimiting [Do Mai 20 20:57:15 2021] uart-pl011 fe201000.serial: no DMA platform data [Do Mai 20 20:57:15 2021] 8021q: 802.1Q VLAN Support v1.8 [Do Mai 20 20:57:16 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS [Do Mai 20 20:57:16 2021] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [Do Mai 20 20:57:16 2021] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [Do Mai 20 20:57:16 2021] bcmgenet fd580000.ethernet eth0: Link is Down [Do Mai 20 20:57:19 2021] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [Do Mai 20 20:57:19 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Do Mai 20 20:57:21 2021] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [Do Mai 20 20:57:21 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [Do Mai 20 20:57:22 2021] Bluetooth: Core ver 2.22 [Do Mai 20 20:57:22 2021] NET: Registered protocol family 31 [Do Mai 20 20:57:22 2021] Bluetooth: HCI device and connection manager initialized [Do Mai 20 20:57:22 2021] Bluetooth: HCI socket layer initialized [Do Mai 20 20:57:22 2021] Bluetooth: L2CAP socket layer initialized [Do Mai 20 20:57:22 2021] Bluetooth: SCO socket layer initialized [Do Mai 20 20:57:22 2021] Bluetooth: HCI UART driver ver 2.3 [Do Mai 20 20:57:22 2021] Bluetooth: HCI UART protocol H4 registered [Do Mai 20 20:57:22 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered [Do Mai 20 20:57:22 2021] Bluetooth: HCI UART protocol Broadcom registered [Do Mai 20 20:57:22 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Do Mai 20 20:57:22 2021] Bluetooth: BNEP filters: protocol multicast [Do Mai 20 20:57:22 2021] Bluetooth: BNEP socket layer initialized -
ls -ls /dev/ | grep serial -
@thomas-braun said in Probleme mit Serialport bei zwave2:
ls -ls /dev/ | grep serial
pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ ls -ls /dev/ | grep serial 0 lrwxrwxrwx 1 root root 5 Mai 20 20:56 serial0 -> ttyS0 0 lrwxrwxrwx 1 root root 7 Mai 20 20:56 serial1 -> ttyAMA0 -
@esmax666 sagte in Probleme mit Serialport bei zwave2:
Am Beispiel von meinem System (da weiß ich was installiert ist...)
echad@chet:~ $ ls -ls /dev/ | grep serial 0 lrwxrwxrwx 1 root root 5 Mai 20 20:29 serial0 -> ttyS0 0 lrwxrwxrwx 1 root root 7 Mai 20 20:29 serial1 -> ttyAMA0ttyS0 -> Mein Raspbee I über die GPIO-Ports vom Raspi4
ttyAMA0 -> Das Raspi-interne Bluetooth.Über USB direkt habe ich nichts an der Mühle dran.
-
@esmax666 sagte in Probleme mit Serialport bei zwave2:
mit /dev/serial0/
Ok, da ist kein Z-Wave Stick dran
No such file or directory, cannot open dev/ttyAMA0
Du hast das führende / vergessen:
/dev/ttyAMA0, nichtdev/ttyAMA0 -
hat schon jemand zwave2 mit aeotec z wave + und iobroker ?
gibt es sonst fertig image ?
ich habe die image verwendet:
https://www.raspberrypi.org/software/operating-systems/ok stimmt er ist hier blokiert:
pi@raspberrypi:~ $ cd /opt/iobroker/node_modules/iobroker.zwave2 pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js - -force --logs 2021-05-20 21:56:05.370 - error: zwave2.0 (15073) adapter disabled 2021-05-20 21:56:05.380 - info: zwave2.0 (15073) starting. Version 1.9.3 in /op t/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 21:56:05.452 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚██ ███╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚═ ═══╝ ╚══════╝ 21:56:05.456 DRIVER version 7.4.0 21:56:05.457 CONFIG version 7.4.0 21:56:05.458 DRIVER 21:56:05.459 DRIVER starting driver... 21:56:05.486 DRIVER opening serial port /dev/ttyAMA0 21:56:05.504 DRIVER serial port opened 21:56:05.506 SERIAL » [NAK] (0x15) -
-
-
@alcalzone
also das ist genau ZW090-C (steht zwave plus) -
@esmax666 Stopp, nicht verwechseln... Beide sind Z-Wave Plus, beide werden unter "ZW090-C" verkauft.
Aber einer heißt Gen5 und macht fiese Probleme wenn er nicht in einem externen USB2.0-Hub steckt und einer heißt Gen5+ und funktioniert einwandfrei. -
@alcalzone ach so dann habe ich gen5, ich muss jetzt ein hub kaufen
-
@esmax666 Bevor du viel Geld für nen Hub ausgibst, kauf dir lieber gleich nen Z-Wave 700 Stick:
https://www.mouser.de/ProductDetail/Silicon-Labs/SLUSB001A?qs=u16ybLDytRbJsMfgk3EnSA==
Kostet fast nix und ist Zukunftssicher. -
@alcalzone hab noch ein irgenwo zu hause, finde ich gerade leider nicht
sonst gibt auch modele für 3€ -
@alcalzone
EDIT: es geht jetzt : (mit ACM09
hi hab jetzt ein usb hub, und jetzt zeigt er ACM0
und ich bekomme das:
pi@raspberrypi:~ $ ls -ls /dev/ | grep serial 0 drwxr-xr-x 4 root root 80 Mai 21 13:46 serial 0 lrwxrwxrwx 1 root root 5 Mai 20 20:56 serial0 -> ttyS0 0 lrwxrwxrwx 1 root root 7 Mai 20 20:56 serial1 -> ttyAMA0 pi@raspberrypi:~ $ cd /opt/iobroker/node_modules/iobroker.zwave2 pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js - -force --logs 2021-05-21 13:52:23.280 - info: zwave2.0 (393) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 13:52:23.362 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 13:52:23.369 DRIVER version 7.4.0 13:52:23.371 CONFIG version 7.4.0 13:52:23.372 DRIVER 13:52:23.372 DRIVER starting driver... 13:52:23.409 DRIVER opening serial port /dev/serial1 13:52:23.429 DRIVER serial port errored: Error Resource temporarily unavailable Cannot lock port 13:52:23.430 DRIVER destroying driver instance... 2021-05-21 13:52:23.433 - error: zwave2.0 (393) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port/dev/serial1
pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-21 13:53:56.938 - info: zwave2.0 (530) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 13:53:57.027 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 13:53:57.032 DRIVER version 7.4.0 13:53:57.034 CONFIG version 7.4.0 13:53:57.035 DRIVER 13:53:57.036 DRIVER starting driver... 13:53:57.069 DRIVER opening serial port /dev/serial1 13:53:57.089 DRIVER serial port errored: Error Resource temporarily unavailable Cannot lock port 13:53:57.092 DRIVER destroying driver instance... 2021-05-21 13:53:57.096 - error: zwave2.0 (530) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port/dev/ttyACM0
pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-21 13:56:15.231 - info: zwave2.0 (615) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 13:56:15.326 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 13:56:15.330 DRIVER version 7.4.0 13:56:15.332 CONFIG version 7.4.0 13:56:15.333 DRIVER 13:56:15.334 DRIVER starting driver... 13:56:15.365 DRIVER opening serial port /dev/ttyACM0 13:56:15.386 DRIVER serial port errored: Error Resource temporarily unavailable Cannot lock port 13:56:15.387 DRIVER destroying driver instance... 2021-05-21 13:56:15.390 - error: zwave2.0 (615) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port 2021-05-21 13:56:15.948 - debug: zwave2.0 (615) sendTo "getAssociationGroups" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:15.952 - debug: zwave2.0 (615) sendTo "getAssociationGroups" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:15.953 - debug: zwave2.0 (615) sendTo "getAssociationGroups" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:16.953 - debug: zwave2.0 (615) sendTo "getAssociations" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:16.957 - debug: zwave2.0 (615) sendTo "getAssociations" to system.adapter.admin.0 from system.adapter.zwave2.0 2021-05-21 13:56:16.961 - debug: zwave2.0 (615) sendTo "getAssociations" to system.adapter.admin.0 from system.adapter.zwave2.0pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-21 13:57:06.347 - info: zwave2.0 (643) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 13:57:06.432 DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗ ╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝ ███╔╝ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ █████╗ ██║ ███████╗ ███╔╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ╚════╝ ██ ██║ ╚════██║ ███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║ ╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝ 13:57:06.437 DRIVER version 7.4.0 13:57:06.439 CONFIG version 7.4.0 13:57:06.439 DRIVER 13:57:06.440 DRIVER starting driver... 13:57:06.472 DRIVER opening serial port /dev/ttyAMA0 13:57:06.496 DRIVER serial port errored: Error Resource temporarily unavailable Cannot lock port 13:57:06.497 DRIVER destroying driver instance... 2021-05-21 13:57:06.501 - error: zwave2.0 (643) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port -
@esmax666 sagte in Probleme mit Serialport bei zwave2:
Resource temporarily unavailable Cannot lock port
Da scheint immer noch was anderes drauf zuzugreifen.
-
@alcalzone 20€ Versandkosten... krass, ist ja mehr als der Stick kostet. 🤮
-
@alcalzone was kannst ich sonst noch machen ? willst du noch etwas sehen ?
-
@esmax666
ich habe sonst ganz normal hier rasbian hier runtergelanden
https://www.raspberrypi.org/software/operating-systems/und dann einfach
curl -sLf https://iobroker.net/install.sh | bash -soll man lieber / gibt es sonst fertig image mit rasbian ?
oder wo konnte noch das problem kommen ?
-
@esmax666
Nein, alles richtig gemacht.Du schreibst doch aber oben, dass jetzt alles funktioniert?
