js-controller 3.2 jetzt im Latest!

man10to

@amg_666 irgendwie kommt beim Neustart mal ein Wert rein aber nicht mehr so wie vorher immer

ich habs mal auf 605 Sekunden gestellt..

Hier meine Versionen: (oder was meinst du mit 2.1.8

iobroker

Platform
    linux
Betriebssystem
    linux
Architektur
    x64
CPUs
    6
Geschwindigkeit
    1799 MHz
Modell
    Intel(R) Xeon(R) CPU E5-2630L v3 @ 1.80GHz
RAM
    4.7 GB
System Betriebszeit
    5 T. 21:16:30
Node.js
    v14.16.0 (Empfohlene Version v12.21.0)
NPM
    6.14.11
Festplatte Größe
    195.86 GB
Festplatte frei
    185.27 GB
Anzahl der Adapter
    332
Betriebszeit
    5 T. 21:16:09
Aktive Instanzen
    25
Hostname
    iobroker

Thomas Braun

@man10to @amg_666
Mit dem plenticore seid ihr schwer OT.

amg_666

@thomas-braun was heisst OT ? Off Topic? Ok, aber @man10to hat angefangen

@man10to mach mal einen getrennten Post auf, das hat hier wirklich nix zu suchen, ich kann dann da ausführlich antworten...

waterchill

Hallo,

ich bekomme den controller gar nicht upgedated. Es kommt die Meldung:

pi@raspberrypi:~ $ cd /opt/iobroker
pi@raspberrypi:/opt/iobroker $ sudo iobroker stop
sudo: iobroker: Befehl nicht gefunden

Scheinbar befindet sich iobroker nicht da wo er sein sollte. Wie finde ich das raus wo iobroker installiert ist?

Thomas Braun

@waterchill

Du sollst ja auch nicht mit sudo da rummurksen.

which iobroker

waterchill

@thomas-braun

Bei dem Befehl kommt leider gar nix raus

pi@raspberrypi:/ $ which iobroker
pi@raspberrypi:/ $

Thomas Braun

@waterchill
Du stehst ohnehin in 'komischen' Verzeichnissen.

cd ~

Kann es sein, dass du den iobroker als root direkt in das Wurzelverzeichnis / oder in /root geballert hast?

Ist aber auch Off Topic, bitte eigenen Thread eröffnen.

apollon77

ich wäre ja bei fixer ausführen mit dem manuellen curl Befehl wie im Eingangspost genannt

waterchill

@apollon77

In dem ganzen Topic hier ist von curl nichts zu finden

Latzi

@apollon77 sagte in js-controller 3.2 jetzt im Latest!:

Bei Fehlern:
Wenn bei der Installation Fehler wegen fehlender Zugriffsrechte auftreten, am besten den Installation-Fixer (iobroker fix wer schon einen js-controller 2.x oder höher hat, alternativ weiterhin manuell via curl -sL https://iobroker.net/fix.sh | bash -) nutzen und die Installation wiederholen.

Neuschwansteini

@waterchill

waterchill

@ilovegym @Latzi

Das geht damit natürlich auch nicht, denn es muss zuerst der iobroker beendet werden. Und iobroker stop geht ja nicht

Neuschwansteini

@waterchill Hi, also da ist anscheinend mehr faul .. bitte eigenen Thread öffnen, dann schauen wir detalliert mal weiter.
Dankeschön.

homecineplexx

@apollon77 said in js-controller 3.2 jetzt im Latest!:

@homecineplexx Falls du globale Scripts hast werden die ja davorgehängt. du versuchst auf irgendetwas zuzugreifen was falsch ist. von solchen Javascripts hab ich auch einiges im Sentry wo versucht wird ein state zuzugreifen mit nem "." am ende - das ist jetzt verboten. Muss im javascript adapter wohl noch abgefangen werden

ich hab den fehler jetzt gefunden.
ich verwende scripts die mir quasi virtuelle Devices anlegt (ähnlich wie alias) sieht code und ich bekomme zb den Error für Calculation.JahresVerbrauch_7 also immer wenn ein Datenpunkt angelegt weden soll, wo ein "." dazwischen ist (sprich ein anderes "Verzeichnis"). kann ich das irgendwie umgehen?

//generic virtual device        
function VirtualDevice(config) {
    //sanity check
    if (typeof config !== 'object' || typeof config.namespace !== 'string' || typeof config.name !== 'string' || typeof config.states !== 'object') {
        log('sanity check failed, no device created', 'warn');
        return;
    }
 
    this.config = config;
    this.namespace = 'VirtualDevice.0.' + config.namespace + '.' + config.name;
    this.name = config.name;
 
    //create virtual device
    log('creating virtual device ' + this.namespace);
    this.createDevice(function () {
        this.createStates(function () {
            log('created virtual device ' + this.namespace);
        }.bind(this));
    }.bind(this));
}
 
VirtualDevice.prototype.createDevice = function (callback) {
    log('creating object for device ' + this.namespace, 'debug');
    //create device object
    var obj = this.config.copy ? getObject(this.config.copy) : {common: {}, native: {}};
    delete obj.common.custom;
    if (typeof this.config.common === 'object') {
        obj.common = Object.assign(obj.common, this.config.common);
    }
    if (typeof this.config.native === 'object') {
        obj.native = Object.assign(obj.native, this.config.native);
    }
    extendObject(this.namespace, {
        //type: 'device',
        type: 'channel',
        common: obj.common,
        native: obj.native
    }, function (err) {
        if (err) {
            log('could not create virtual device: ' + this.namespace, 'warn');
            return;
        }
        log('created object for device ' + this.namespace, 'debug');
        if (typeof this.config.onCreate === 'function') {
            this.config.onCreate(this, callback);
        } else {
            callback();
        }
    }.bind(this));
};
  
VirtualDevice.prototype.createStates = function (callback) {
    'use strict';
    log('creating states for device ' + this.namespace, 'debug');
    var stateIds = Object.keys(this.config.states);
    log('creating states ' + JSON.stringify(stateIds), 'debug');
    var countCreated = 0;
    for (var i = 0; i < stateIds.length; i++) {
        let stateId = stateIds[i];
        this.normalizeState(stateId);
        var id = this.namespace + '.' + stateId;
        log('creating state ' + id, 'debug');
        var obj = this.config.states[stateId].copy ? getObject(this.config.states[stateId].copy) : {
            type: 'state',
            common: {},
            native: {}
        };
        delete obj.common.custom;
        if (typeof this.config.states[stateId].common === 'object') {
            obj.common = Object.assign(obj.common, this.config.states[stateId].common);
        }
        if (typeof this.config.states[stateId].native === 'object') {
            obj.native = Object.assign(obj.native, this.config.states[stateId].native);
        }

       // var checkObj = getObject(id);

    	//if (!checkObj) {
    		setObject(id, obj, function(err, checkObj) {
    			if (err) {
                    log('skipping creation of state ' + id, 'debug');
                } else {
                    log('created state ' + id, 'debug');
                }
                if (!err && checkObj) {
                    //setTimeout(function(){
                        this.connectState(stateId);
                        countCreated++;
                        if (countCreated >= stateIds.length) {
                            log('created ' + countCreated + ' states for device ' + this.namespace, 'debug');
                            callback();
                        }

                        var newId = checkObj.id;
                        var helper = newId.substr(newId.lastIndexOf('.') + 1, newId.length);

                        var stateValueNew = this.config.states[helper].stateValue;
                        
                        if (stateValueNew !== undefined) {
                            setStateDelayed(newId, stateValueNew, 1000);
                            log('set default: ' + stateValueNew + ' for ' + newId);
                        }
                    //}.bind(this), 500);
                }
    		}.bind(this)); 
    	//} 
    }
};
 
VirtualDevice.prototype.normalizeState = function (state) {
    log('normalizing state ' + state, 'debug');
    if (typeof this.config.states[state].read !== 'object') {
        this.config.states[state].read = {};
    }
    if (typeof this.config.states[state].write !== 'object') {
        this.config.states[state].write = {};
    }
 
    var readIds = Object.keys(this.config.states[state].read);
    for (var i = 0; i < readIds.length; i++) {
        var readId = this.config.states[state].read[readIds[i]];
        if (typeof readId.before !== 'function') {
            this.config.states[state].read[readIds[i]].before = function (device, value, callback) {
                callback();
            };
        }
        if (typeof readId.after !== 'function') {
            this.config.states[state].read[readIds[i]].after = function (device, value) {
            };
        }
    }
    var writeIds = Object.keys(this.config.states[state].write);
    for (i = 0; i < writeIds.length; i++) {
        var writeId = this.config.states[state].write[writeIds[i]];
        if (typeof writeId.before !== 'function') {
            this.config.states[state].write[writeIds[i]].before = function (device, value, callback) {
                callback()
            };
        }
        if (typeof writeId.after !== 'function') {
            this.config.states[state].write[writeIds[i]].after = function (device, value) {
            };
        }
    }
    log('normalized state ' + state, 'debug');
};
 

VirtualDevice.prototype.connectState = function (state) {
    setTimeout(function(){
        log('connecting state ' + state, 'debug');
        var id = this.namespace + '.' + state;
    
        //subscribe to read ids
        var readIds = Object.keys(this.config.states[state].read);
        for (var i = 0; i < readIds.length; i++) {
            if (readIds[i] === null || readIds[i] === undefined || readIds[i] === '') {
                continue;
            }
            if (getState(readIds[i]).notExist === true) { //check if state exists
                log('cannot connect to not existing state: ' + readIds[i], 'warn');
                continue;
            }
            var readObj = this.config.states[state].read[readIds[i]];
            var trigger = readObj.trigger || {change: 'any'};
            trigger.ack = true;
            trigger.id = readIds[i];
            this.subRead(trigger, readObj, state);
            log('connected ' + readIds[i] + ' to ' + id, 'debug');
        }
    
        //subscribe to this state and write to write ids
        var writeIds = Object.keys(this.config.states[state].write);
        var trigger = {id: this.namespace + '.' + state, change: 'any', ack: false};
        //original var trigger = {id: 'javascript.' + instance + '.' + this.namespace + '.' + state, change: 'any', ack: false};
        on(trigger, function (obj) {
            'use strict';
            log('detected change of ' + state, 'debug');
            for (var i = 0; i < writeIds.length; i++) {
                let writeObj = this.config.states[state].write[writeIds[i]];
                let val = this.convertValue(obj.state.val, writeObj.convert);
                let writeId = writeIds[i];
                log('executing function before for ' + writeId, 'debug');
                writeObj.before(this, val, function (newVal, newDelay) {
                    if (newVal !== undefined && newVal !== null) val = newVal;
                    var delay = writeObj.delay;
                    if (newDelay !== undefined && newDelay !== null) delay = newDelay;
                    log(newVal + 'writing value ' + val + ' to ' + writeId + ' with delay ' + delay, 'debug');
                    setStateDelayed(writeId, val, false, delay || 0, true, function () {
                        log('executing function after for ' + writeId, 'debug');
                        writeObj.after(this, val);
                    }.bind(this));
                }.bind(this));
            }
        }.bind(this));

        log('connected ' + state + ' to ' + JSON.stringify(writeIds), 'debug');
    }.bind(this), 500);
};
  
VirtualDevice.prototype.subRead = function (trigger, readObj, state) {
    var func = function (obj) {
        var val = this.convertValue(obj.state.val, readObj.convert);
 
        //@todo aggregations
 
        log('executing function before for ' + trigger.id, 'debug');
        readObj.before(this, val, function (newVal, newDelay) {
            if (newVal !== undefined && newVal !== null) val = newVal;
            if (newDelay !== undefined && newDelay !== null) writeObj.delay = newDelay;
            log('reading value ' + val + ' to ' + this.namespace + '.' + state, 'debug');
            setStateDelayed(this.namespace + '.' + state, val, true, readObj.delay || 0, true, function () {
                log('executing function after for ' + trigger.id, 'debug');
                readObj.after(this, val);
            }.bind(this));
        }.bind(this));
    }.bind(this);
    func({state: getState(trigger.id)});
    on(trigger, func);
};
 
VirtualDevice.prototype.convertValue = function (val, func) {
    if (typeof func !== 'function') {
        return val;
    }
    return func(val);
};

var deviceId = 'watermeter';

new VirtualDevice({
    namespace: 'ESP',
    name: deviceId,
    states: {
        'isTelegramInfo': {
            common: {name: 'TelegramInfo wird durch JavaScript gesetzt', role: 'state', type: 'boolean', desc: 'TelegramInfo', read: true, write: true, def: true},
            stateValue: true
        },
        'name': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId, role: 'text', type: 'string', desc: 'name', read: true, write: false, def: 'Keller Waschraum - Wasserzähler'},
            stateValue: 'Keller Waschraum - Wasserzähler'
        },
        'Zaehlerstand': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Zaehlerstand', role: 'variable', type: 'number', desc: 'Zaehlerstand', read: true, write: false, def: '0', 'unit': 'm³',
                custom: {
                    'influxdb.0': {
                        'enabled': true,
                        'changesOnly': true,
                        'debounce': 0,
                        'maxLength': 10,
                        'retention': 0,
                        'changesRelogInterval': 0,
                        'changesMinDelta': 0,
                        'storageType': '',
                        'aliasId': ''
                    }
                }
            },
            read: {
                'mqtt.0.wasserzaehler.zaehlerstand': {
                    convert: function (val) {
                        return Number(val);
                    },
                },
            },
        },
        'online': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.online', role: 'variable', type: 'boolean', desc: 'online', read: true, write: false, def: false,
                custom: {
                        'influxdb.0': {
                            'enabled': true,
                            'changesOnly': true,
                            'debounce': 0,
                            'maxLength': 10,
                            'retention': 0,
                            'changesRelogInterval': 30,
                            'changesMinDelta': 0,
                            'storageType': '',
                            'aliasId': ''
                        }
                    }
            },
            read: {
                'mqtt.0.wasserzaehler.error': {
                    convert: function (val) {
                        return val != 'connection lost';
                    },
                    trigger: setTimeout(function(){
                            on({id:'VirtualDevice.0.ESP.' + deviceId + '.online', change: 'ne'}, function (obj) {
                                var value = obj.state.val;

                                if (getState('VirtualDevice.0.ESP.' + deviceId + '.isTelegramInfo').val === true) {
                                    var name = getState('VirtualDevice.0.ESP.' + deviceId + '.name').val;

                                    _sendLogToTelegram(_findCorrectEmoji('OnlineStatus: ' + name + ' ist ' + (value === true ? 'wieder' : 'nicht') + ' erreichbar.'));
                                } 
                            })
                        }, 500)
                },
            },
            write: {}
        },
        'error': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.error', role: 'text', type: 'string', desc: 'error', read: true, write: false, def: ''},
            read: {
                'mqtt.0.wasserzaehler.error': {
                },
            },
            write: {}
        },
        'Calculation.TageszaehlStand': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.TageszaehlStand', role: 'variable', type: 'number', desc: 'TageszaehlStand', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.aktuellerTagesVerbrauch': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.aktuellerTagesVerbrauch', role: 'variable', type: 'number', desc: 'aktuellerTagesVerbrauch', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.TagesVerbrauch_1': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.TagesVerbrauch_1', role: 'variable', type: 'number', desc: 'TagesVerbrauch_1', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.TagesVerbrauch_2': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.TagesVerbrauch_2', role: 'variable', type: 'number', desc: 'TagesVerbrauch_2', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.TagesVerbrauch_3': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.TagesVerbrauch_3', role: 'variable', type: 'number', desc: 'TagesVerbrauch_3', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.TagesVerbrauch_4': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.TagesVerbrauch_4', role: 'variable', type: 'number', desc: 'TagesVerbrauch_4', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.TagesVerbrauch_5': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.TagesVerbrauch_5', role: 'variable', type: 'number', desc: 'TagesVerbrauch_5', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.TagesVerbrauch_6': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.TagesVerbrauch_6', role: 'variable', type: 'number', desc: 'TagesVerbrauch_6', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.TagesVerbrauch_7': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.TagesVerbrauch_7', role: 'variable', type: 'number', desc: 'TagesVerbrauch_7', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },

        'Calculation.WochenzaehlStand': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.WochenzaehlStand', role: 'variable', type: 'number', desc: 'WochenzaehlStand', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
         'Calculation.aktuellerWochenVerbrauch': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.aktuellerWochenVerbrauch', role: 'variable', type: 'number', desc: 'aktuellerWochenVerbrauch', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.WochenVerbrauch_1': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.WochenVerbrauch_1', role: 'variable', type: 'number', desc: 'WochenVerbrauch_1', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.WochenVerbrauch_2': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.WochenVerbrauch_2', role: 'variable', type: 'number', desc: 'WochenVerbrauch_2', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.WochenVerbrauch_3': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.WochenVerbrauch_3', role: 'variable', type: 'number', desc: 'WochenVerbrauch_3', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.WochenVerbrauch_4': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.WochenVerbrauch_4', role: 'variable', type: 'number', desc: 'WochenVerbrauch_4', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.WochenVerbrauch_5': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.WochenVerbrauch_5', role: 'variable', type: 'number', desc: 'WochenVerbrauch_5', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.WochenVerbrauch_6': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.WochenVerbrauch_6', role: 'variable', type: 'number', desc: 'WochenVerbrauch_6', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.WochenVerbrauch_7': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.WochenVerbrauch_7', role: 'variable', type: 'number', desc: 'WochenVerbrauch_7', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },

        'Calculation.MonatzaehlStand': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatzaehlStand', role: 'variable', type: 'number', desc: 'MonatzaehlStand', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
         'Calculation.aktuellerMonatVerbrauch': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.aktuellerMonatVerbrauch', role: 'variable', type: 'number', desc: 'aktuellerMonatVerbrauch', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_1': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_1', role: 'variable', type: 'number', desc: 'MonatVerbrauch_1', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_2': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_2', role: 'variable', type: 'number', desc: 'MonatVerbrauch_2', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_3': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_3', role: 'variable', type: 'number', desc: 'MonatVerbrauch_3', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_4': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_4', role: 'variable', type: 'number', desc: 'MonatVerbrauch_4', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_5': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_5', role: 'variable', type: 'number', desc: 'MonatVerbrauch_5', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_6': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_6', role: 'variable', type: 'number', desc: 'MonatVerbrauch_6', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_7': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_7', role: 'variable', type: 'number', desc: 'MonatVerbrauch_7', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_8': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_8', role: 'variable', type: 'number', desc: 'MonatVerbrauch_8', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_9': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_9', role: 'variable', type: 'number', desc: 'MonatVerbrauch_9', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_10': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_10', role: 'variable', type: 'number', desc: 'MonatVerbrauch_10', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_11': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_11', role: 'variable', type: 'number', desc: 'MonatVerbrauch_11', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.MonatVerbrauch_12': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.MonatVerbrauch_12', role: 'variable', type: 'number', desc: 'MonatVerbrauch_12', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },

        'Calculation.JahreszaehlStand': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.JahreszaehlStand', role: 'variable', type: 'number', desc: 'JahreszaehlStand', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
         'Calculation.aktuellerJahresVerbrauch': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.aktuellerJahresVerbrauch', role: 'variable', type: 'number', desc: 'aktuellerJahresVerbrauch', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.JahresVerbrauch_1': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.JahresVerbrauch_1', role: 'variable', type: 'number', desc: 'JahresVerbrauch_1', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.JahresVerbrauch_2': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.JahresVerbrauch_2', role: 'variable', type: 'number', desc: 'JahresVerbrauch_2', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.JahresVerbrauch_3': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.JahresVerbrauch_3', role: 'variable', type: 'number', desc: 'JahresVerbrauch_3', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.JahresVerbrauch_4': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.JahresVerbrauch_4', role: 'variable', type: 'number', desc: 'JahresVerbrauch_4', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.JahresVerbrauch_5': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.JahresVerbrauch_5', role: 'variable', type: 'number', desc: 'JahresVerbrauch_5', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.JahresVerbrauch_6': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.JahresVerbrauch_6', role: 'variable', type: 'number', desc: 'JahresVerbrauch_6', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
        'Calculation.JahresVerbrauch_7': {
            common: {name: 'VirtualDevice.0.ESP.' + deviceId + '.Calculation.JahresVerbrauch_7', role: 'variable', type: 'number', desc: 'JahresVerbrauch_7', read: true, write: true, def: 0, min: 0, max: 999999, 'unit': 'm³'},
        },
    }
});

Könnte mir da bitte jemand weiterhelfen, wäre sehr dankbar.
lg

ChristianS

Hallo zusammen,

leider klappt mein Update von 3.1.6 auf 3.2.16 nicht.
Hab´s ausprobiert, wie beschrieben, aber auch nach dem fix funktioniert es genaus wenig wie mit "sudo -H -u iobroker npm install iobroker.js-controller":

pi@ioBroker-Pi:/opt/iobroker/node_modules/.bin $ curl -sL https://iobroker.net/f                                                                                                                               ix.sh | bash -
library: loaded
Library version=2021-01-23

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 2020-12-07

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/3)
==========================================================================

Holen:1 http://archive.raspberrypi.org/debian stretch InRelease [25,3 kB]
Holen:2 http://mirrordirector.raspbian.org/raspbian stretch InRelease [15,0 kB]
Holen:3 http://archive.raspberrypi.org/debian stretch/main armhf Packages [192 k                                                                                                                               B]
Holen:4 http://archive.raspberrypi.org/debian stretch/ui armhf Packages [44,6 kB                                                                                                                               ]
Holen:5 https://deb.nodesource.com/node_10.x stretch InRelease [4.585 B]
Holen:6 http://mirrordirector.raspbian.org/raspbian stretch/main armhf Packages                                                                                                                                [11,7 MB]
Holen:7 https://deb.nodesource.com/node_10.x stretch/main armhf Packages [765 B]
Holen:8 http://mirrordirector.raspbian.org/raspbian stretch/non-free armhf Packa                                                                                                                               ges [98,9 kB]
Es wurden 12,0 MB in 15 s geholt (766 kB/s).
Paketlisten werden gelesen... Fertig
Installed gcc-c++
Installed libcairo2-dev
Installed libpango1.0-dev
Installed libjpeg-dev
Installed libgif-dev
Installed librsvg2-dev

==========================================================================
    Checking ioBroker user and directory permissions (2/3)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...

==========================================================================
    Checking autostart (3/3)
==========================================================================

Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

pi@ioBroker-Pi:/opt/iobroker/node_modules/.bin $
pi@ioBroker-Pi:/opt/iobroker/node_modules/.bin $
pi@ioBroker-Pi:/opt/iobroker/node_modules/.bin $ iobroker upgrade self
Update js-controller from @3.1.6 to @3.2.16
NPM version: 6.14.4
npm install iobroker.js-controller@3.2.16 --loglevel error --unsafe-perm --prefi                                                                                                                               x "/opt/iobroker" (System call)
npm ERR! code EEXIST
npm ERR! path /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Refusing to delete /opt/iobroker/node_modules/.bin/iobroker: is outside /opt/iobroker/node_modules/iobroker.js-controller and not a link
npm ERR! File exists: /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Remove the existing file and try again, or run npm
npm ERR! with --force to overwrite files recklessly.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2021-03-25T19_56_16_277Z-debug.log
Starting node restart.js
pi@ioBroker-Pi:/opt/iobroker/node_modules/.bin $ sudo -H -u iobroker npm install iobroker.js-controller
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.1 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code EEXIST
npm ERR! path /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Refusing to delete /opt/iobroker/node_modules/.bin/iobroker: is outside /opt/iobroker/node_modules/iobroker.js-controller and not a link
npm ERR! File exists: /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Remove the existing file and try again, or run npm
npm ERR! with --force to overwrite files recklessly.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2021-03-25T19_58_22_934Z-debug.log
pi@ioBroker-Pi:/opt/iobroker/node_modules/.bin $

"Lösche" ich /opt/iobroker/node_modules/.bin/iobroker, kommt dann die Fehlermeldung:

pi@ioBroker-Pi:/opt/iobroker/node_modules/.bin $ sudo -H -u iobroker npm install iobroker.js-controller
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.1 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code EEXIST
npm ERR! path /opt/iobroker/node_modules/iobroker.js-controller/node_modules/.bin/semver
npm ERR! Refusing to delete /opt/iobroker/node_modules/iobroker.js-controller/node_modules/.bin/semver: is outside /opt/iobroker/node_modules/iobroker.js-controller/node_modules/semver and not a link
npm ERR! File exists: /opt/iobroker/node_modules/iobroker.js-controller/node_modules/.bin/semver
npm ERR! Remove the existing file and try again, or run npm
npm ERR! with --force to overwrite files recklessly.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2021-03-25T20_09_00_166Z-debug.log

Hat jemand eine Idee? Was kann ich ausprobieren?

Viele Grüße und danke im Voraus,
Christian

Thomas Braun

@christians

stretch EOL: 2020-07-06

Vermutlich solltest du die angemeckerten Dateien manuell löschen.
Und du solltest nicht in dem Verzeichnis stehen. Stell dich in dein /home.

apollon77

@christians sagte in js-controller 3.2 jetzt im Latest!:

/opt/iobroker/node_modules/.bin

Ja ... das nicht in dem verzeichnis machen ?!

/opt/iobroker

ChristianS

@apollon77

Leider ändert es nichts, wenn ich das Ganze aus dem /opt/iobroker Verzeichnis heraus mache.

Erstmal "normal":

pi@ioBroker-Pi:/opt/iobroker $ iobroker upgrade self
Update js-controller from @3.1.6 to @3.2.16
NPM version: 6.14.4
npm install iobroker.js-controller@3.2.16 --loglevel error --unsafe-perm --prefix "/opt/iobroker" (System call)
npm ERR! code EEXIST
npm ERR! path /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Refusing to delete /opt/iobroker/node_modules/.bin/iobroker: is outside /opt/iobroker/node_modules/iobroker.js-controller and not a link
npm ERR! File exists: /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Remove the existing file and try again, or run npm
npm ERR! with --force to overwrite files recklessly.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2021-03-26T21_24_38_839Z-debug.log
Starting node restart.js

Dann fix.sh inkl. nächstem Versuch:

pi@ioBroker-Pi:/opt/iobroker $ curl -sL https://iobroker.net/fix.sh | bash -
library: loaded
Library version=2021-01-23

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 2020-12-07

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/3)
==========================================================================

OK:1 http://archive.raspberrypi.org/debian stretch InRelease
OK:2 http://mirrordirector.raspbian.org/raspbian stretch InRelease
OK:3 https://deb.nodesource.com/node_10.x stretch InRelease
Paketlisten werden gelesen... Fertig
Installed gcc-c++

==========================================================================
    Checking ioBroker user and directory permissions (2/3)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...

==========================================================================
    Checking autostart (3/3)
==========================================================================

Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

pi@ioBroker-Pi:/opt/iobroker $
pi@ioBroker-Pi:/opt/iobroker $
pi@ioBroker-Pi:/opt/iobroker $
pi@ioBroker-Pi:/opt/iobroker $ iobroker upgrade self
Update js-controller from @3.1.6 to @3.2.16
NPM version: 6.14.4
npm install iobroker.js-controller@3.2.16 --loglevel error --unsafe-perm --prefix "/opt/iobroker" (System call)
npm ERR! code EEXIST
npm ERR! path /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Refusing to delete /opt/iobroker/node_modules/.bin/iobroker: is outside /opt/iobroker/node_modules/iobroker.js-controller and not a link
npm ERR! File exists: /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Remove the existing file and try again, or run npm
npm ERR! with --force to overwrite files recklessly.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2021-03-26T21_28_21_744Z-debug.log
Starting node restart.js

Und dann noch "mit "sudo -H -u iobroker npm install iobroker.js-controller"

pi@ioBroker-Pi:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.1 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code EEXIST
npm ERR! path /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Refusing to delete /opt/iobroker/node_modules/.bin/iobroker: is outside /opt/iobroker/node_modules/iobroker.js-controller and not a link
npm ERR! File exists: /opt/iobroker/node_modules/.bin/iobroker
npm ERR! Remove the existing file and try again, or run npm
npm ERR! with --force to overwrite files recklessly.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2021-03-26T21_30_13_878Z-debug.log

Versuche das jetzt mal mit dem manuellen Löschen, wie @Thomas-Braun gesagt hat.

Viele Grüße,
Christian

ChristianS

Aber das manuelle Löschen hat wirklich geholfen.
Ich musste folgende Files aus dem Verzeichnis /opt/iobroker/node_modules/iobroker.js-controller/node_modules/.bin/ löschen:

iobroker
mime
mkdirp
semver

Danach lief die Installation durch:

pi@ioBroker-Pi:/opt/iobroker $ iobroker upgrade self
Update js-controller from @3.1.6 to @3.2.16
NPM version: 6.14.4
npm install iobroker.js-controller@3.2.16 --loglevel error --unsafe-perm --prefix "/opt/iobroker" (System call)
Starting node restart.js

iobroker ließ sich starten und ....

pi@ioBroker-Pi:/opt/iobroker $ iobroker version
3.2.16

Danke Euch für die Unterstützung!

Viele Grüße,
Christian

NEWS

js-controller 3.2 jetzt im Latest!

Support us

942
Online

31.7k
Users

79.6k
Topics

1.3m
Posts

NEWS

js-controller 3.2 jetzt im Latest!

Support us

942Online

31.7kUsers

79.6kTopics

1.3mPosts

942
Online

31.7k
Users

79.6k
Topics

1.3m
Posts