NEWS
Probleme mit CUL 868
-
Super, dass der Adapter jetzt auch läuft.
Habe zwar noch keine Ahnung was und vor allem wie damit arbeiten, aber er läuft!
Ich musste auch als Port eingeben:
ttyACM0Dann kam die Fehlermeldung:
cul.0 2016-11-01 19:38:05.583 info List of port: [{"comName":"/dev/ttyS0"},{"comName":"/dev/ttyS1"},{"comName":"/dev/ttyS2"},{"comName":"/dev/ttyS3"}] cul.0 2016-11-01 19:37:30.772 error Cannot open port: Error: Error: No such file or directory, cannot open /dev/ttyACM0Nach einem restart der Instanz lief er aber.
Gruß
Rainer
-
ich sehe zwar die zustände der CUL, aber unter Objekte kann ich sie nicht sehen.
was läuft da falsch?
1597_a1.png
1597_a2.png -
entwarnung. im experten-modus sind die werte des CULs sichtbar.
1597_a3.png -
Ja, das sehe ich auch so. Denn bis jetzt wurden keine Geräte gefunden. `
mal zur neuier und fehler suche, was fuer geraete moechtest du den mit dem CUL 868 betreiben ?
-
Das ist alles, was bei mir im Log zu CUL steht:
cul.0 2016-11-02 18:59:35.608 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 18:59:35.479 debug statesDB connected cul.0 2016-11-02 18:59:35.453 debug objectDB connected cul.0 2016-11-02 18:58:51.451 info terminating cul.0 2016-11-02 18:58:43.608 error Cannot open port: Port is not selected cul.0 2016-11-02 18:58:43.592 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 18:47:52.299 info terminating cul.0 2016-11-02 15:34:53.954 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 15:19:14.938 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 14:16:38.777 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 14:00:59.691 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 13:50:33.703 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 13:40:07.647 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 13:29:41.649 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 12:53:10.482 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 12:32:18.414 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-02 12:16:39.539 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.culIrgendwelche Vorschläge Bluefox?
-
schon wieder gabs im Log eine Überraschung:
cul.0 2016-11-03 18:58:12.679 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-03 18:58:12.580 debug statesDB connected cul.0 2016-11-03 18:58:12.548 debug objectDB connected host.minime 2016-11-03 18:58:11.262 info instance system.adapter.cul.0 started with pid 17467 host.minime 2016-11-03 18:57:41.231 info Restart adapter system.adapter.cul.0 because enabled host.minime 2016-11-03 18:57:41.226 error instance system.adapter.cul.0 terminated with code 0 (OK) ReferenceError: 2016-11-03 18:57:41.186 error at FSReqWrap.wrapper [as oncomplete] (fs.js:576:17) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort. (/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/lib/serialport.js:306:7) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort. (/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/lib/serialport.js:293:14) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort._emitData (/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/lib/serialport.js:313:18) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort.module.exports.raw (/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/lib/parsers.js:7:13) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort.emit (events.js:169:7) ReferenceError: 2016-11-03 18:57:41.186 error at emitOne (events.js:77:13) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort. (/opt/iobroker/node_modules/iobroker.cul/node_modules/cul/cul.js:128:70) ReferenceError: 2016-11-03 18:57:41.186 error at parse (/opt/iobroker/node_modules/iobroker.cul/node_modules/cul/cul.js:183:43) ReferenceError: 2016-11-03 18:57:41.186 error at Object.module.exports.parse (/opt/iobroker/node_modules/iobroker.cul/node_modules/cul/lib/hms.js:47:26) ReferenceError: 2016-11-03 18:57:41.186 error data is not defined uncaught 2016-11-03 18:57:41.180 error exception: data is not defined -
schon wieder gabs im Log eine Überraschung:
cul.0 2016-11-03 18:58:12.679 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.cul cul.0 2016-11-03 18:58:12.580 debug statesDB connected cul.0 2016-11-03 18:58:12.548 debug objectDB connected host.minime 2016-11-03 18:58:11.262 info instance system.adapter.cul.0 started with pid 17467 host.minime 2016-11-03 18:57:41.231 info Restart adapter system.adapter.cul.0 because enabled host.minime 2016-11-03 18:57:41.226 error instance system.adapter.cul.0 terminated with code 0 (OK) ReferenceError: 2016-11-03 18:57:41.186 error at FSReqWrap.wrapper [as oncomplete] (fs.js:576:17) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort. (/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/lib/serialport.js:306:7) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort. (/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/lib/serialport.js:293:14) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort._emitData (/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/lib/serialport.js:313:18) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort.module.exports.raw (/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/lib/parsers.js:7:13) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort.emit (events.js:169:7) ReferenceError: 2016-11-03 18:57:41.186 error at emitOne (events.js:77:13) ReferenceError: 2016-11-03 18:57:41.186 error at SerialPort. (/opt/iobroker/node_modules/iobroker.cul/node_modules/cul/cul.js:128:70) ReferenceError: 2016-11-03 18:57:41.186 error at parse (/opt/iobroker/node_modules/iobroker.cul/node_modules/cul/cul.js:183:43) ReferenceError: 2016-11-03 18:57:41.186 error at Object.module.exports.parse (/opt/iobroker/node_modules/iobroker.cul/node_modules/cul/lib/hms.js:47:26) ReferenceError: 2016-11-03 18:57:41.186 error data is not defined uncaught 2016-11-03 18:57:41.180 error exception: data is not defined ```` `Da ist jetzt hobbyquaker dran.
Du kannst aber auch ausprobieren wenn du die Datei__/opt/iobroker/node_modules/iobroker.cul/node_modules/cul/lib/hms.js__ bei sich wie folgt änderst:
-
nach der installation:
` > root@minime:/opt/iobroker# npm install https://github.com/ioBroker/ioBroker.cul/tarball/master –production
\
serialport@4.0.4 install /opt/iobroker/node_modules/iobroker.cul/node_modules/serialport
node-pre-gyp install --fallback-to-build
node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAd ... arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.4 and node@4.6.1 (node-v46 ABI) (falling back to source compile with node-gyp)
make: Entering directory '/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/build'
CXX(target) Release/obj.target/serialport/src/serialport.o
CXX(target) Release/obj.target/serialport/src/serialport_unix.o
CXX(target) Release/obj.target/serialport/src/serialport_poller.o
SOLINK_MODULE(target) Release/obj.target/serialport.node
COPY Release/serialport.node
make: Leaving directory '/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/build'
iobroker.cul@0.1.0 node_modules/iobroker.cul
├── cul@0.2.1
└── serialport@4.0.4 (bindings@1.2.1, commander@2.9.0, debug@2.2.0, lie@3.1.0, nan@2.4.0, object.assign@4.0.4) `
ist mein lib verzeichnis fast leer:root@minime:/opt/iobroker/node_modules/iobroker.cul/lib# ls -la total 12 drwxr-xr-x 2 root root 4096 Nov 3 20:20 . drwxr-xr-x 6 root root 4096 Nov 3 20:20 .. -rw-r--r-- 1 root root 2577 Nov 1 09:22 utils.jswas mache ich falsch, bei der installation? muss ich vorher das cul paket https://github.com/hobbyquaker/cul installieren?
-
nach der installation:
` > root@minime:/opt/iobroker# npm install https://github.com/ioBroker/ioBroker.cul/tarball/master –production
\
serialport@4.0.4 install /opt/iobroker/node_modules/iobroker.cul/node_modules/serialport
node-pre-gyp install --fallback-to-build
node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAd ... arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.4 and node@4.6.1 (node-v46 ABI) (falling back to source compile with node-gyp)
make: Entering directory '/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/build'
CXX(target) Release/obj.target/serialport/src/serialport.o
CXX(target) Release/obj.target/serialport/src/serialport_unix.o
CXX(target) Release/obj.target/serialport/src/serialport_poller.o
SOLINK_MODULE(target) Release/obj.target/serialport.node
COPY Release/serialport.node
make: Leaving directory '/opt/iobroker/node_modules/iobroker.cul/node_modules/serialport/build'
iobroker.cul@0.1.0 node_modules/iobroker.cul
├── cul@0.2.1
└── serialport@4.0.4 (bindings@1.2.1, commander@2.9.0, debug@2.2.0, lie@3.1.0, nan@2.4.0, object.assign@4.0.4) `
ist mein lib verzeichnis fast leer:root@minime:/opt/iobroker/node_modules/iobroker.cul/lib# ls -la total 12 drwxr-xr-x 2 root root 4096 Nov 3 20:20 . drwxr-xr-x 6 root root 4096 Nov 3 20:20 .. -rw-r--r-- 1 root root 2577 Nov 1 09:22 utils.jswas mache ich falsch, bei der installation? muss ich vorher das cul paket https://github.com/hobbyquaker/cul installieren? `
Lasse es. Hobbyquaker hat schon erledigt. KannSt du noch mal vom gut einfach updaten?
528
Online32.7k
Benutzer82.4k
Themen1.3m
Beiträge