Zigbee Adapter v1.2.1 immer Rot
-
@Mapio90 sagte in Zigbee Adapter v1.2.1 immer Rot:
Das war ja jetzt eine riesige Prozedur
Jein, das liegt halt daran, wenn man das System länger nicht anfasst. Dann muss man da halt dann mehr Zeit für die diversen 'dreckigen' Ecken investieren. Wenn man das regelmäßiger macht sind auch die Baustellen nicht so groß.
Den slave würde ich mir dann an deiner Stelle auch vorknöpfen. Bei dem kann aber die Gemengelage wieder ganz anders aussehen. Muss man sich dann halt mal genauer anschauen, was da der Stand ist.
okay dann stell ich da auch mal so viele informationen hier rein wie oben beschrieben. Aber im Endeffekt ist der gleich konfiguriert wie der Master, nur anders benannt.
-
Woran lag jetzt der Fehler, kann man das eingrenzen?
Welchen Fehler meinst du genau? Das waren ja jetzt mehrere falsche/veraltete Einstellungen.
-
okay, das reicht mir schon. Macht es Sinn einen neuen Thread für den Slave zu öffnen? Habe beim Slave zwar das gleiche Problem, dass der Zigbee rot ist aber das sind ja Probleme von veralteten EInstellungen!?
@Mapio90 sagte in Zigbee Adapter v1.2.1 immer Rot:
Habe beim Slave zwar das gleiche Problem, dass der Zigbee rot ist aber das sind ja Probleme von veralteten EInstellungen!?
Möglich. Kann man halt so ohne Meldungen vom System nix zu sagen.
Prinzipiell läuft das immer gleich ab:
Grundsystem auf Stand bringen, auf Serverbetrieb umstellen wenn möglich, nodeJS auf Stand bringen, iobroker auf Stand bringen. -
Hallo Zusammen, ich bräuchte Hilfe, mein Zigbee Adapter ist nach dem Update von Nodejs, npm und Admin die ganze zeit auf rot.
Das Einzige was von den dreien grün ist, ist "Verbunden mit Zigbee"
Update scheitert auch... habe im obigen Post gelesen einfach mal aktuallisieren aber das geht schon nicht, bei mir zumindest.
Ich habe vor erstmal den Zigbee Adapter des Masters zu aktuallisieren.Hier mein Log dazu.
host.Master 2020-12-04 19:55:37.134 info Rebuild for adapter system.adapter.zigbee.0 not successful in 3 tries. Adapter will not be restarted again. Please execute "npm install --production" in adapter directory manually. host.Master 2020-12-04 19:55:37.133 error instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) host.Master 2020-12-04 19:55:37.132 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) host.Master 2020-12-04 19:55:37.132 error Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1027:10) host.Master 2020-12-04 19:55:37.131 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:999:30) host.Master 2020-12-04 19:55:37.131 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/serialport/lib/bindings/linux.js:2:36) host.Master 2020-12-04 19:55:37.131 error Caught by controller[0]: at bindings (/opt/iobroker/node_modules/bindings/bindings.js:81:44) host.Master 2020-12-04 19:55:37.130 error Caught by controller[0]: at require (internal/modules/cjs/helpers.js:74:18) host.Master 2020-12-04 19:55:37.130 error Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:887:19) host.Master 2020-12-04 19:55:37.130 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:708:14) host.Master 2020-12-04 19:55:37.129 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) host.Master 2020-12-04 19:55:37.129 error Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1057:18) host.Master 2020-12-04 19:55:37.128 error Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). host.Master 2020-12-04 19:55:37.128 error Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing host.Master 2020-12-04 19:55:37.128 error Caught by controller[0]: NODE_MODULE_VERSION 57. This version of Node.js requires host.Master 2020-12-04 19:55:37.127 error Caught by controller[0]: was compiled against a different Node.js version using host.Master 2020-12-04 19:55:37.127 error Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/serialport/build/Release/serialport.node' host.Master 2020-12-04 19:55:37.127 error Caught by controller[0]: ^ host.Master 2020-12-04 19:55:37.126 error Caught by controller[0]: throw e host.Master 2020-12-04 19:55:37.125 error Caught by controller[0]: /opt/iobroker/node_modules/bindings/bindings.js:88 host.Master 2020-12-04 19:55:35.768 info instance system.adapter.zigbee.0 started with pid 15801 host.Master 2020-12-04 19:55:35.699 info "system.adapter.zigbee.0" enabled host.Master 2020-12-04 19:55:09.247 info iobroker exit 0 host.Master 2020-12-04 19:55:08.217 info iobroker Adapter "zigbee" updated host.Master 2020-12-04 19:55:08.155 info iobroker upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript host.Master 2020-12-04 19:55:08.094 info iobroker upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png host.Master 2020-12-04 19:55:08.032 info iobroker upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png host.Master 2020-12-04 19:55:07.963 info iobroker upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png host.Master 2020-12-04 19:55:07.888 info iobroker upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png host.Master 2020-12-04 19:55:07.814 info iobroker upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png host.Master 2020-12-04 19:55:07.739 info iobroker upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.png img/TRADFRI.bulb.E27.png image/png host.Master 2020-12-04 19:55:07.667 info iobroker upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.remote.control.png img/TRADFRI.remote.control.png image/png host.Master 2020-12-04 19:55:07.596 info iobroker upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara.switch.png img/aqara.switch.png image/png host.Master 2020-12-04 19:55:07.498 info iobroker upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_bulb.png img/aqara_bulb.png image/png host.Master 2020-12-04 19:55:07.413 info iobroker upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_numan_body_sensor.png img/aqara_numan_body_sensor.png image/png host.Master 2020-12-04 19:55:07.340 info iobroker upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_temperature_sensor.png img/aqara_temperature_sensor.png image/png host.Master 2020-12-04 19:55:07.267 info iobroker upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/battery_p.png img/battery_p.png image/png host.Master 2020-12-04 19:55:07.191 info iobroker upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/battery_v.png img/battery_v.png image/png host.Master 2020-12-04 19:55:07.119 info iobroker upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_plug.png img/bitron_plug.png image/png host.Master 2020-12-04 19:55:07.048 info iobroker upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/contact.png img/contact.png image/png host.Master 2020-12-04 19:55:06.972 info iobroker upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_ln1.png img/ctrl_ln1.png image/png host.Master 2020-12-04 19:55:06.897 info iobroker upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_ln2.png img/ctrl_ln2.png image/png host.Master 2020-12-04 19:55:06.825 info iobroker upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_neutral1.png img/ctrl_neutral1.png image/png host.Master 2020-12-04 19:55:06.756 info iobroker upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_neutral2.png img/ctrl_neutral2.png image/png host.Master 2020-12-04 19:55:06.694 info iobroker upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/cube.png img/cube.png image/png host.Master 2020-12-04 19:55:05.114 info iobroker upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gledopto_bulb.png img/gledopto_bulb.png image/png host.Master 2020-12-04 19:55:04.412 info iobroker upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/innr.png img/innr.png image/png host.Master 2020-12-04 19:55:03.727 info iobroker upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lumi_lock_v1.png img/lumi_lock_v1.png image/png host.Master 2020-12-04 19:55:03.049 info iobroker upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/osram_surface_light_tw.png img/osram_surface_light_tw.png image/png host.Master 2020-12-04 19:55:02.313 info iobroker upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_rwl021.png img/philips_hue_rwl021.png image/png host.Master 2020-12-04 19:55:01.586 info iobroker upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/sensor_motion_aq2.png img/sensor_motion_aq2.png image/png host.Master 2020-12-04 19:55:00.942 info iobroker upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/unknown.png img/unknown.png image/png host.Master 2020-12-04 19:55:00.120 info iobroker npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2020-12-04T18_55_00_014Z-debug.log host.Master 2020-12-04 19:54:59.933 info iobroker ERR! notsup Unsupported engine for dissolve@0.3.3: wanted: {"node":"~0.10.0"} (current: {"node":"12.20.0","npm":"6.14.8"})npm ERR! notsup Not compatible with your version of node/npm: disso host.Master 2020-12-04 19:54:59.928 info iobroker npm host.Master 2020-12-04 19:54:59.880 info iobroker npm ERR! code ENOTSUP host.Master 2020-12-04 19:54:17.956 info iobroker npm install iobroker.zigbee@1.3.1 --loglevel error --prefix "/opt/iobroker" (System call) host.Master 2020-12-04 19:54:17.952 info iobroker NPM version: 6.14.8 host.Master 2020-12-04 19:54:16.918 info iobroker Update zigbee from @0.9.2 to @1.3.1 host.Master 2020-12-04 19:54:13.711 info iobroker upgrade zigbeeZusätzliche Infos
pi@Master:~ $ iobroker list adapters system.adapter.admin : admin - v4.1.10 system.adapter.alexa2 : alexa2 - v3.3.1 system.adapter.backitup : backitup - v1.7.0 system.adapter.ble : ble - v0.12.0 system.adapter.cloud : cloud - v3.1.0 system.adapter.daswetter : daswetter - v3.0.4 system.adapter.digitalstrom : digitalstrom - v0.5.5 system.adapter.discovery : discovery - v2.3.11 system.adapter.flot : flot - v1.10.4 system.adapter.info : info - v1.7.10 system.adapter.javascript : javascript - v4.1.12 system.adapter.mihome-vacuum : mihome-vacuum - v1.1.5 system.adapter.mobile : mobile - v0.5.0 system.adapter.samsung : samsung - v0.2.9 system.adapter.scenes : scenes - v2.3.0 system.adapter.socketio : socketio - v3.0.13 system.adapter.sonoff : sonoff - v2.2.2 system.adapter.telegram : telegram - v1.6.0 system.adapter.terminal : terminal - v0.1.2 system.adapter.text2command : text2command - v1.2.5 system.adapter.tr-064 : tr-064 - v0.4.18 system.adapter.web : web - v2.4.1 system.adapter.zigbee : zigbee - v0.9.2pi@Master:~ $ iobroker list instances + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.admin.1 : admin - disabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 - enabled + system.adapter.backitup.0 : backitup - enabled system.adapter.backitup.1 : backitup - disabled + system.adapter.ble.0 : ble - enabled system.adapter.ble.1 : ble - disabled + system.adapter.cloud.0 : cloud - enabled + system.adapter.digitalstrom.0 : digitalstrom - enabled + system.adapter.discovery.0 : discovery - enabled system.adapter.flot.0 : flot - enabled + system.adapter.javascript.0 : javascript - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum - enabled, port: 54321 system.adapter.mobile.0 : mobile - disabled + system.adapter.samsung.0 : samsung - enabled + system.adapter.scenes.0 : scenes - enabled + system.adapter.socketio.0 : socketio - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.text2command.0 : text2command - enabled + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019367259-if00 system.adapter.zigbee.1 : zigbee - disabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019361A08-if00 + instance is alive@Thomas-Braun
Auch hier beim Slave ist der Zigbee Adapter rotpi@second-device:~ $ iobroker list adapters system.adapter.admin : admin - v4.1.10 system.adapter.alexa2 : alexa2 - v3.3.5 system.adapter.backitup : backitup - v1.7.0 system.adapter.ble : ble - v0.12.0 system.adapter.cloud : cloud - v3.1.0 system.adapter.daswetter : daswetter - v3.0.4 system.adapter.digitalstrom : digitalstrom - v0.5.5 system.adapter.discovery : discovery - v2.3.11 system.adapter.flot : flot - v1.10.4 system.adapter.info : info - v1.7.10 system.adapter.javascript : javascript - v4.8.4 system.adapter.mihome-vacuum : mihome-vacuum - v2.1.1 system.adapter.mobile : mobile - v1.0.1 system.adapter.samsung : samsung - v0.2.9 system.adapter.scenes : scenes - v2.3.0 system.adapter.simple-api : simple-api - v2.4.8 system.adapter.socketio : socketio - v3.0.13 system.adapter.sonoff : sonoff - v2.3.3 system.adapter.telegram : telegram - v1.6.0 system.adapter.terminal : terminal - v0.1.2 system.adapter.text2command : text2command - v2.0.5 system.adapter.tr-064 : tr-064 - v4.2.1 system.adapter.web : web - v3.0.14 system.adapter.zigbee : zigbee - v0.10.3pi@second-device:~ $ iobroker list instances + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.admin.1 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 - enabled + system.adapter.backitup.0 : backitup - enabled + system.adapter.backitup.1 : backitup - enabled + system.adapter.ble.0 : ble - enabled + system.adapter.ble.1 : ble - enabled + system.adapter.cloud.0 : cloud - enabled + system.adapter.digitalstrom.0 : digitalstrom - enabled + system.adapter.discovery.0 : discovery - enabled system.adapter.flot.0 : flot - enabled + system.adapter.javascript.0 : javascript - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum - enabled, port: 54321 system.adapter.mobile.0 : mobile - disabled + system.adapter.samsung.0 : samsung - enabled + system.adapter.scenes.0 : scenes - enabled + system.adapter.socketio.0 : socketio - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.text2command.0 : text2command - enabled + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019367259-if00 system.adapter.zigbee.1 : zigbee - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019361A08-if00 + instance is alivepi@second-device:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v12.20.0 /usr/bin/node v12.20.0 /usr/bin/npm 6.14.8 nodejs: Installiert: 12.20.0-1nodesource1 Installationskandidat: 12.20.0-1nodesource1 Versionstabelle: *** 12.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_12.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 500 500 http://archive.raspberrypi.org/debian stretch/main armhf Packages 4.8.2~dfsg-1 500 500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages -
@Thomas-Braun
Auch hier beim Slave ist der Zigbee Adapter rotpi@second-device:~ $ iobroker list adapters system.adapter.admin : admin - v4.1.10 system.adapter.alexa2 : alexa2 - v3.3.5 system.adapter.backitup : backitup - v1.7.0 system.adapter.ble : ble - v0.12.0 system.adapter.cloud : cloud - v3.1.0 system.adapter.daswetter : daswetter - v3.0.4 system.adapter.digitalstrom : digitalstrom - v0.5.5 system.adapter.discovery : discovery - v2.3.11 system.adapter.flot : flot - v1.10.4 system.adapter.info : info - v1.7.10 system.adapter.javascript : javascript - v4.8.4 system.adapter.mihome-vacuum : mihome-vacuum - v2.1.1 system.adapter.mobile : mobile - v1.0.1 system.adapter.samsung : samsung - v0.2.9 system.adapter.scenes : scenes - v2.3.0 system.adapter.simple-api : simple-api - v2.4.8 system.adapter.socketio : socketio - v3.0.13 system.adapter.sonoff : sonoff - v2.3.3 system.adapter.telegram : telegram - v1.6.0 system.adapter.terminal : terminal - v0.1.2 system.adapter.text2command : text2command - v2.0.5 system.adapter.tr-064 : tr-064 - v4.2.1 system.adapter.web : web - v3.0.14 system.adapter.zigbee : zigbee - v0.10.3pi@second-device:~ $ iobroker list instances + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.admin.1 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 - enabled + system.adapter.backitup.0 : backitup - enabled + system.adapter.backitup.1 : backitup - enabled + system.adapter.ble.0 : ble - enabled + system.adapter.ble.1 : ble - enabled + system.adapter.cloud.0 : cloud - enabled + system.adapter.digitalstrom.0 : digitalstrom - enabled + system.adapter.discovery.0 : discovery - enabled system.adapter.flot.0 : flot - enabled + system.adapter.javascript.0 : javascript - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum - enabled, port: 54321 system.adapter.mobile.0 : mobile - disabled + system.adapter.samsung.0 : samsung - enabled + system.adapter.scenes.0 : scenes - enabled + system.adapter.socketio.0 : socketio - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.text2command.0 : text2command - enabled + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019367259-if00 system.adapter.zigbee.1 : zigbee - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019361A08-if00 + instance is alivepi@second-device:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v12.20.0 /usr/bin/node v12.20.0 /usr/bin/npm 6.14.8 nodejs: Installiert: 12.20.0-1nodesource1 Installationskandidat: 12.20.0-1nodesource1 Versionstabelle: *** 12.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_12.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 500 500 http://archive.raspberrypi.org/debian stretch/main armhf Packages 4.8.2~dfsg-1 500 500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages@Mapio90 Sieht wohl ähnlich aus
sudo apt update sudo apt dist-upgrade sudo rebootiobroker update cd /opt/iobroker npm i iobroker.zigbee@1.3.1 --force iobroker upgrade -
@Thomas-Braun
Auch hier beim Slave ist der Zigbee Adapter rotpi@second-device:~ $ iobroker list adapters system.adapter.admin : admin - v4.1.10 system.adapter.alexa2 : alexa2 - v3.3.5 system.adapter.backitup : backitup - v1.7.0 system.adapter.ble : ble - v0.12.0 system.adapter.cloud : cloud - v3.1.0 system.adapter.daswetter : daswetter - v3.0.4 system.adapter.digitalstrom : digitalstrom - v0.5.5 system.adapter.discovery : discovery - v2.3.11 system.adapter.flot : flot - v1.10.4 system.adapter.info : info - v1.7.10 system.adapter.javascript : javascript - v4.8.4 system.adapter.mihome-vacuum : mihome-vacuum - v2.1.1 system.adapter.mobile : mobile - v1.0.1 system.adapter.samsung : samsung - v0.2.9 system.adapter.scenes : scenes - v2.3.0 system.adapter.simple-api : simple-api - v2.4.8 system.adapter.socketio : socketio - v3.0.13 system.adapter.sonoff : sonoff - v2.3.3 system.adapter.telegram : telegram - v1.6.0 system.adapter.terminal : terminal - v0.1.2 system.adapter.text2command : text2command - v2.0.5 system.adapter.tr-064 : tr-064 - v4.2.1 system.adapter.web : web - v3.0.14 system.adapter.zigbee : zigbee - v0.10.3pi@second-device:~ $ iobroker list instances + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.admin.1 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 - enabled + system.adapter.backitup.0 : backitup - enabled + system.adapter.backitup.1 : backitup - enabled + system.adapter.ble.0 : ble - enabled + system.adapter.ble.1 : ble - enabled + system.adapter.cloud.0 : cloud - enabled + system.adapter.digitalstrom.0 : digitalstrom - enabled + system.adapter.discovery.0 : discovery - enabled system.adapter.flot.0 : flot - enabled + system.adapter.javascript.0 : javascript - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum - enabled, port: 54321 system.adapter.mobile.0 : mobile - disabled + system.adapter.samsung.0 : samsung - enabled + system.adapter.scenes.0 : scenes - enabled + system.adapter.socketio.0 : socketio - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.text2command.0 : text2command - enabled + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019367259-if00 system.adapter.zigbee.1 : zigbee - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019361A08-if00 + instance is alivepi@second-device:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v12.20.0 /usr/bin/node v12.20.0 /usr/bin/npm 6.14.8 nodejs: Installiert: 12.20.0-1nodesource1 Installationskandidat: 12.20.0-1nodesource1 Versionstabelle: *** 12.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_12.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 500 500 http://archive.raspberrypi.org/debian stretch/main armhf Packages 4.8.2~dfsg-1 500 500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages@Mapio90 Und auch auf dem System mal nach dem Runlevel schauen:
who -r -
@Mapio90 Sieht wohl ähnlich aus
sudo apt update sudo apt dist-upgrade sudo rebootiobroker update cd /opt/iobroker npm i iobroker.zigbee@1.3.1 --force iobroker upgrade@Thomas-Braun
also ich bin mir nicht ganz sicher, aber ich glaube mir schmiert die sd karte vom Slave gerade ab.
habe vorher das system runter gefahren um den zigbee stick einzustecken.
Nach dem wieder hochfahren (sudo reboot) hat das system ewig gebraucht bis der slave wieder online kam. Gerade wieder unter putty eingeloggt iobroker update eingegeben und jetzt tust sich seit 5 min garnichts mehr. -
@Thomas-Braun
also ich bin mir nicht ganz sicher, aber ich glaube mir schmiert die sd karte vom Slave gerade ab.
habe vorher das system runter gefahren um den zigbee stick einzustecken.
Nach dem wieder hochfahren (sudo reboot) hat das system ewig gebraucht bis der slave wieder online kam. Gerade wieder unter putty eingeloggt iobroker update eingegeben und jetzt tust sich seit 5 min garnichts mehr. -
@Mapio90 Und auch auf dem System mal nach dem Runlevel schauen:
who -r@Thomas-Braun sagte in Zigbee Adapter v1.2.1 immer Rot:
who -r
Hab ihn mal über nacht laufen lassen..und scheint soweit alles durchgelaufen zu sein.
pi@second-device:~ $ iobroker update Used repository: default hash unchanged, use cached sources update done Adapter "admin" : 4.1.10 , installed 4.1.10 Adapter "alarm" : 1.8.1 Adapter "alexa2" : 3.3.5 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 1.1.0 Adapter "artnet" : 1.2.2 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.7.0 , installed 1.7.0 Adapter "beckhoff" : 1.2.2 Adapter "benq" : 0.2.0 Adapter "binance" : 1.1.3 Adapter "ble" : 0.12.0 , installed 0.12.0 Adapter "bmw" : 1.3.3 Adapter "bosesoundtouch": 0.2.4 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.7.3 Adapter "broadlink2" : 2.0.3 Adapter "bsblan" : 0.2.0 Adapter "bshb" : 0.1.10 Adapter "chromecast" : 2.3.1 Adapter "cloud" : 3.1.0 Adapter "comfoair" : 0.3.2 Adapter "contactid" : 1.0.1 Adapter "coronavirus-statistics": 0.6.3 Adapter "countdown" : 1.1.0 Adapter "cul" : 1.3.3 Adapter "daikin" : 1.1.2 Adapter "daswetter" : 3.0.4 , installed 3.0.4 Adapter "deconz" : 1.3.11 Adapter "denon" : 1.7.7 Adapter "device-reminder": 0.5.4 Adapter "devices" : 0.3.13 Adapter "digitalstrom" : 0.5.5 Adapter "discovergy" : 0.5.0 Adapter "discovery" : 2.3.11 , installed 2.3.11 Adapter "doorio" : 1.1.1 Adapter "ds18b20" : 1.1.5 Adapter "dwd" : 2.5.1 Adapter "ebus" : 2.1.1 Adapter "ecovacs-deebot": 1.0.3 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.7 Adapter "emby" : 1.0.2 Adapter "energymanager" : 1.2.3 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "exchangerates" : 0.0.13 Adapter "fakeroku" : 0.2.1 Adapter "fb-checkpresence": 1.1.0 Adapter "feiertage" : 1.0.17 Adapter "fhem" : 1.5.3 Adapter "find-my-iphone": 0.2.15 Adapter "firetv" : 0.0.27 Adapter "flot" : 1.10.4 Adapter "foobar2000" : 2.0.3 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.2.4 Adapter "fronius" : 1.0.5 Adapter "frontier_silicon": 0.0.10 Adapter "fullcalendar" : 1.1.0 Adapter "fullybrowser" : 2.0.1 Adapter "g-homa" : 0.5.3 Adapter "geofency" : 0.3.2 Adapter "growatt" : 0.0.14 Adapter "gruenbeck" : 0.0.18 Adapter "habpanel" : 0.4.3 Adapter "haier" : 1.0.2 Adapter "ham" : 1.1.2 Adapter "ham-wemo" : 1.1.0 Adapter "harmony" : 1.2.2 Adapter "heatingcontrol": 1.0.0 Adapter "heos" : 1.6.1 Adapter "heytech" : 1.0.0 Adapter "hid" : 0.1.17 Adapter "history" : 1.9.10 Adapter "hm-rega" : 2.6.24 Adapter "hm-rpc" : 1.14.24 Adapter "hmip" : 1.5.0 Adapter "homeconnect" : 0.0.30 Adapter "homee" : 1.0.7 Adapter "homepilot" : 1.0.3 Adapter "hp-ilo" : 1.0.6 Adapter "hs100" : 2.0.1 Adapter "hue" : 3.3.8 Adapter "hue-extended" : 2.0.0 Adapter "i2c" : 1.1.1 Adapter "ical" : 1.7.4 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.9.1 Adapter "info" : 1.7.10 Adapter "innogy-smarthome": 0.3.6 Adapter "iogo" : 0.5.10 Adapter "iot" : 1.5.3 Adapter "iqontrol" : 1.5.0 Adapter "jarvis" : 1.0.9 Adapter "javascript" : 4.8.4 Adapter "jeelink" : 0.1.0 Controller "js-controller" : 3.1.6 , installed 3.1.6 Adapter "kecontact" : 1.0.1 Adapter "klf200" : 1.0.1 Adapter "km200" : 1.1.6 Adapter "knmi-weather" : 1.0.0 Adapter "knx" : 1.0.39 Adapter "kodi" : 2.0.4 Adapter "kostal-piko-ba": 1.1.3 Adapter "kress" : 2.5.5 Adapter "lametric" : 0.0.9 Adapter "landroid" : 1.0.3 Adapter "lcn" : 1.0.2 Adapter "legrand-ecocompteur": 1.0.0 Adapter "letrika_comgw" : 0.0.5 Adapter "lgtv" : 1.1.10 Adapter "lgtv-rs" : 0.1.0 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.0 Adapter "lightify" : 0.2.16 Adapter "link" : 0.5.9 Adapter "linkeddevices" : 1.2.2 Adapter "linux-control" : 1.0.1 Adapter "logparser" : 1.1.0 Adapter "lovelace" : 1.0.16 Adapter "loxone" : 2.0.2 Adapter "luftdaten" : 1.0.1 Adapter "lupusec" : 1.2.9 Adapter "luxtronik1" : 0.2.2 Adapter "material" : 0.13.9 Adapter "maxcube" : 1.0.2 Adapter "maxcul" : 1.3.1 Adapter "mbus" : 2.3.1 Adapter "mclighting" : 0.1.1 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "melcloud" : 1.0.6 Adapter "mercedesme" : 0.0.21 Adapter "mercury" : 0.1.1 Adapter "meross" : 1.5.0 Adapter "meteoalarm" : 1.0.9 Adapter "midea" : 0.0.6 Adapter "miele" : 0.1.5 Adapter "mielecloudservice": 2.0.0 Adapter "mihome" : 1.3.5 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.1 Adapter "mihome-vacuum" : 2.1.1 Adapter "mikrotik" : 1.0.11 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.2.7 Adapter "minuvis" : 1.0.0 Adapter "mobile" : 1.0.1 Adapter "modbus" : 3.1.10 Adapter "moma" : 1.2.7 Adapter "mpd" : 1.0.5 Adapter "mqtt" : 2.1.9 Adapter "mqtt-client" : 1.3.1 Adapter "musiccast" : 0.1.3 Adapter "mydlink" : 1.1.7 Adapter "mysensors" : 2.0.1 Adapter "nanoleaf-lightpanels": 1.0.6 Adapter "nello" : 2.0.6 Adapter "netatmo" : 1.3.3 Adapter "netatmo-crawler": 0.3.8 Adapter "nibeuplink" : 0.3.0 Adapter "nina" : 0.0.22 Adapter "node-red" : 2.0.1 Adapter "nuki" : 1.4.2 Adapter "nuki-extended" : 2.3.0 Adapter "nut" : 1.1.3 Adapter "octoprint" : 1.0.1 Adapter "odl" : 1.0.7 Adapter "oilfox" : 0.0.5 Adapter "onkyo" : 2.0.3 Adapter "onvif" : 0.4.4 Adapter "openhab" : 1.1.0 Adapter "openligadb" : 1.1.0 Adapter "openweathermap": 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.4 Adapter "owntracks" : 0.6.3 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.0.7 Adapter "phantomjs" : 1.1.2 Adapter "pi-hole" : 1.3.1 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.3.0 Adapter "ping" : 1.4.12 Adapter "places" : 1.0.0 Adapter "plex" : 0.8.11 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.6 Adapter "proxmox" : 1.0.1 Adapter "proxy" : 1.2.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 2.0.3 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 1.0.9 Adapter "radiohead" : 1.0.7 Adapter "rflink" : 2.1.6 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.1.3 Adapter "robonect" : 0.1.3 Adapter "roomba" : 1.1.1 Adapter "rpi2" : 1.2.0 Adapter "s7" : 1.1.9 Adapter "samsung" : 0.2.9 Adapter "sayit" : 1.12.2 Adapter "sbfspot" : 4.0.2 Adapter "scenes" : 2.3.0 Adapter "schoolfree" : 0.7.0 Adapter "schwoerer-ventcube": 1.3.0 Adapter "shelly" : 4.0.3 Adapter "shuttercontrol": 1.0.4 Adapter "sia" : 1.0.4 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.4.8 Adapter "smappee" : 0.2.2 Adapter "smartcontrol" : 1.2.1 Adapter "smartgarden" : 1.0.1 Adapter "smartmeter" : 3.1.6 Adapter "snips" : 1.5.1 Adapter "snmp" : 0.5.0 Adapter "socketio" : 3.0.13 Adapter "solarlog" : 2.0.0 Adapter "solarviewdatareader": 0.2.1 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.7.0 Adapter "sonoff" : 2.3.3 Adapter "sonos" : 2.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.15.3 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 1.0.0 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.2 Adapter "stiebel-isg" : 1.5.1 Adapter "sunnyportal" : 0.1.5 Adapter "swiss-weather-api": 0.3.2 Adapter "synology" : 0.1.18 Adapter "systeminfo" : 0.3.1 Adapter "tahoma" : 0.3.2 Adapter "tankerkoenig" : 2.0.5 Adapter "telegram" : 1.6.0 Adapter "terminal" : 0.1.2 Adapter "tesla-motors" : 0.2.3 Adapter "text2command" : 2.0.5 Adapter "tinker" : 1.1.0 Adapter "tr-064" : 4.2.1 Adapter "tradfri" : 2.6.3 Adapter "trashschedule" : 1.0.3 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 3.4.1 Adapter "tvspielfilm" : 1.0.4 Adapter "unifi" : 0.5.8 Adapter "upnp" : 1.0.16 Adapter "vaillant" : 0.0.10 Adapter "valloxmv" : 1.1.1 Adapter "vcard" : 0.0.9 Adapter "velux" : 0.0.5 Adapter "viessmann" : 1.3.2 Adapter "virtualpowermeter": 1.2.1 Adapter "vis" : 1.3.4 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.2.0 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.7 Adapter "vis-icontwo" : 0.34.0 Adapter "vis-inventwo" : 2.5.11 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.2 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.4 Adapter "vis-material-advanced": 1.3.0 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.6 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 Adapter "vis-weather" : 2.5.2 Adapter "vr200" : 1.0.0 Adapter "vw-connect" : 0.0.15 Adapter "weatherunderground": 3.2.1 Adapter "web" : 3.0.14 Adapter "weishaupt-wem" : 0.0.8 Adapter "whatsapp-cmb" : 0.1.6 Adapter "wiffi-wz" : 2.2.0 Adapter "wifilight" : 1.1.0 Adapter "windows-control": 0.1.5 Adapter "wled" : 0.5.2 Adapter "wm-bus" : 0.1.12 Adapter "wolf" : 1.2.1 Adapter "worx" : 1.2.3 Adapter "xbox" : 0.6.8 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.11.0 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.3 Adapter "youtube" : 1.0.0 Adapter "yr" : 2.0.3 Adapter "zigbee" : 1.3.1 , installed 0.10.3 [Updateable] Adapter "zont" : 0.5.3 Adapter "zwave" : 2.0.1 Adapter "zwave2" : 1.7.10 pi@second-device:~ $ cd /opt/iobroker pi@second-device:/opt/iobroker $ npm i iobroker.zigbee@1.3.1 --force npm WARN using --force I sure hope you know what you are doing. > @serialport/bindings@9.0.3 install /opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=12.20.0 runtime=node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o CXX(target) Release/obj.target/bindings/src/serialport_unix.o CXX(target) Release/obj.target/bindings/src/poller.o CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird verlassen > serialport@9.0.2 postinstall /opt/iobroker/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate npm WARN winston-syslog@2.4.4 requires a peer of winston@^3.0.0 but none is installed. You must install peer dependencies yourself. + iobroker.zigbee@1.3.1 added 34 packages from 34 contributors, removed 252 packages, updated 18 packages and moved 5 packages in 53.452s 13 packages are looking for funding run `npm fund` for details pi@second-device:/opt/iobroker $ iobroker upgrade Adapter "admin" is up to date. Adapter "alarm" is not installed. Adapter "alexa2" is not installed. Adapter "alpha2" is not installed. Adapter "amazon-dash" is not installed. Adapter "artnet" is not installed. Adapter "asterisk" is not installed. Adapter "asuswrt" is not installed. Adapter "b-control-em" is not installed. Adapter "backitup" is up to date. Adapter "beckhoff" is not installed. Adapter "benq" is not installed. Adapter "binance" is not installed. Adapter "ble" is up to date. Adapter "bmw" is not installed. Adapter "bosesoundtouch" is not installed. Adapter "botvac" is not installed. Adapter "bring" is not installed. Adapter "broadlink2" is not installed. Adapter "bsblan" is not installed. Adapter "bshb" is not installed. Adapter "chromecast" is not installed. Adapter "cloud" is not installed. Adapter "comfoair" is not installed. Adapter "contactid" is not installed. Adapter "coronavirus-statistics" is not installed. Adapter "countdown" is not installed. Adapter "cul" is not installed. Adapter "daikin" is not installed. Adapter "daswetter" is up to date. Adapter "deconz" is not installed. Adapter "denon" is not installed. Adapter "device-reminder" is not installed. Adapter "devices" is not installed. Adapter "digitalstrom" is not installed. Adapter "discovergy" is not installed. Adapter "discovery" is up to date. Adapter "doorio" is not installed. Adapter "ds18b20" is not installed. Adapter "dwd" is not installed. Adapter "ebus" is not installed. Adapter "ecovacs-deebot" is not installed. Adapter "egigeozone" is not installed. Adapter "ekey" is not installed. Adapter "email" is not installed. Adapter "emby" is not installed. Adapter "energymanager" is not installed. Adapter "enet" is not installed. Adapter "epson_stylus_px830" is not installed. Adapter "exchangerates" is not installed. Adapter "fakeroku" is not installed. Adapter "fb-checkpresence" is not installed. Adapter "feiertage" is not installed. Adapter "fhem" is not installed. Adapter "find-my-iphone" is not installed. Adapter "firetv" is not installed. Adapter "flot" is not installed. Adapter "foobar2000" is not installed. Adapter "fritzbox" is not installed. Adapter "fritzdect" is not installed. Adapter "fronius" is not installed. Adapter "frontier_silicon" is not installed. Adapter "fullcalendar" is not installed. Adapter "fullybrowser" is not installed. Adapter "g-homa" is not installed. Adapter "geofency" is not installed. Adapter "growatt" is not installed. Adapter "gruenbeck" is not installed. Adapter "habpanel" is not installed. Adapter "haier" is not installed. Adapter "ham" is not installed. Adapter "ham-wemo" is not installed. Adapter "harmony" is not installed. Adapter "heatingcontrol" is not installed. Adapter "heos" is not installed. Adapter "heytech" is not installed. Adapter "hid" is not installed. Adapter "history" is not installed. Adapter "hm-rega" is not installed. Adapter "hm-rpc" is not installed. Adapter "hmip" is not installed. Adapter "homeconnect" is not installed. Adapter "homee" is not installed. Adapter "homepilot" is not installed. Adapter "hp-ilo" is not installed. Adapter "hs100" is not installed. Adapter "hue" is not installed. Adapter "hue-extended" is not installed. Adapter "i2c" is not installed. Adapter "ical" is not installed. Adapter "icons-addictive-flavour-png" is not installed. Adapter "icons-fatcow-hosting" is not installed. Adapter "icons-icons8" is not installed. Adapter "icons-material-png" is not installed. Adapter "icons-material-svg" is not installed. Adapter "icons-mfd-png" is not installed. Adapter "icons-mfd-svg" is not installed. Adapter "icons-open-icon-library-png" is not installed. Adapter "icons-ultimate-png" is not installed. Adapter "influxdb" is not installed. Adapter "info" is not installed. Adapter "innogy-smarthome" is not installed. Adapter "iogo" is not installed. Adapter "iot" is not installed. Adapter "iqontrol" is not installed. Adapter "jarvis" is not installed. Adapter "javascript" is not installed. Adapter "jeelink" is not installed. Adapter "kecontact" is not installed. Adapter "klf200" is not installed. Adapter "km200" is not installed. Adapter "knmi-weather" is not installed. Adapter "knx" is not installed. Adapter "kodi" is not installed. Adapter "kostal-piko-ba" is not installed. Adapter "kress" is not installed. Adapter "lametric" is not installed. Adapter "landroid" is not installed. Adapter "lcn" is not installed. Adapter "legrand-ecocompteur" is not installed. Adapter "letrika_comgw" is not installed. Adapter "lgtv" is not installed. Adapter "lgtv-rs" is not installed. Adapter "lgtv11" is not installed. Adapter "lifx" is not installed. Adapter "lightify" is not installed. Adapter "link" is not installed. Adapter "linkeddevices" is not installed. Adapter "linux-control" is not installed. Adapter "logparser" is not installed. Adapter "lovelace" is not installed. Adapter "loxone" is not installed. Adapter "luftdaten" is not installed. Adapter "lupusec" is not installed. Adapter "luxtronik1" is not installed. Adapter "material" is not installed. Adapter "maxcube" is not installed. Adapter "maxcul" is not installed. Adapter "mbus" is not installed. Adapter "mclighting" is not installed. Adapter "megad" is not installed. Adapter "megadd" is not installed. Adapter "megaesp" is not installed. Adapter "melcloud" is not installed. Adapter "mercedesme" is not installed. Adapter "mercury" is not installed. Adapter "meross" is not installed. Adapter "meteoalarm" is not installed. Adapter "midea" is not installed. Adapter "miele" is not installed. Adapter "mielecloudservice" is not installed. Adapter "mihome" is not installed. Adapter "mihome-lamp" is not installed. Adapter "mihome-plug" is not installed. Adapter "mihome-vacuum" is not installed. Adapter "mikrotik" is not installed. Adapter "milight" is not installed. Adapter "milight-smart-light" is not installed. Adapter "minuvis" is not installed. Adapter "mobile" is not installed. Adapter "modbus" is not installed. Adapter "moma" is not installed. Adapter "mpd" is not installed. Adapter "mqtt" is not installed. Adapter "mqtt-client" is not installed. Adapter "musiccast" is not installed. Adapter "mydlink" is not installed. Adapter "mysensors" is not installed. Adapter "nanoleaf-lightpanels" is not installed. Adapter "nello" is not installed. Adapter "netatmo" is not installed. Adapter "netatmo-crawler" is not installed. Adapter "nibeuplink" is not installed. Adapter "nina" is not installed. Adapter "node-red" is not installed. Adapter "nuki" is not installed. Adapter "nuki-extended" is not installed. Adapter "nut" is not installed. Adapter "octoprint" is not installed. Adapter "odl" is not installed. Adapter "oilfox" is not installed. Adapter "onkyo" is not installed. Adapter "onvif" is not installed. Adapter "openhab" is not installed. Adapter "openligadb" is not installed. Adapter "openweathermap" is not installed. Adapter "opi" is not installed. Adapter "oppoplayer" is not installed. Adapter "owfs" is not installed. Adapter "owntracks" is not installed. Adapter "panasonic-viera" is not installed. Adapter "parser" is not installed. Adapter "paw" is not installed. Adapter "phantomjs" is not installed. Adapter "pi-hole" is not installed. Adapter "piface" is not installed. Adapter "pimatic" is not installed. Adapter "ping" is not installed. Adapter "places" is not installed. Adapter "plex" is not installed. Adapter "plexconnect" is not installed. Adapter "pollenflug" is not installed. Adapter "proxmox" is not installed. Adapter "proxy" is not installed. Adapter "pushbullet" is not installed. Adapter "pushover" is not installed. Adapter "pushsafer" is not installed. Adapter "radar2" is not installed. Adapter "radiohead" is not installed. Adapter "rflink" is not installed. Adapter "rickshaw" is not installed. Adapter "ring" is not installed. Adapter "robonect" is not installed. Adapter "roomba" is not installed. Adapter "rpi2" is not installed. Adapter "s7" is not installed. Adapter "samsung" is not installed. Adapter "sayit" is not installed. Adapter "sbfspot" is not installed. Adapter "scenes" is not installed. Adapter "schoolfree" is not installed. Adapter "schwoerer-ventcube" is not installed. Adapter "shelly" is not installed. Adapter "shuttercontrol" is not installed. Adapter "sia" is not installed. Adapter "siegenia" is not installed. Adapter "simple-api" is not installed. Adapter "smappee" is not installed. Adapter "smartcontrol" is not installed. Adapter "smartgarden" is not installed. Adapter "smartmeter" is not installed. Adapter "snips" is not installed. Adapter "snmp" is not installed. Adapter "socketio" is not installed. Adapter "solarlog" is not installed. Adapter "solarviewdatareader" is not installed. Adapter "solarwetter" is not installed. Adapter "sonnen" is not installed. Adapter "sonoff" is not installed. Adapter "sonos" is not installed. Adapter "sony-bravia" is not installed. Adapter "spotify-premium" is not installed. Adapter "sql" is not installed. Adapter "squeezebox" is not installed. Adapter "squeezeboxrpc" is not installed. Adapter "starline" is not installed. Adapter "statistics" is not installed. Adapter "stiebel-isg" is not installed. Adapter "sunnyportal" is not installed. Adapter "swiss-weather-api" is not installed. Adapter "synology" is not installed. Adapter "systeminfo" is not installed. Adapter "tahoma" is not installed. Adapter "tankerkoenig" is not installed. Adapter "telegram" is not installed. Adapter "terminal" is not installed. Adapter "tesla-motors" is not installed. Adapter "text2command" is not installed. Adapter "tinker" is not installed. Adapter "tr-064" is not installed. Adapter "tradfri" is not installed. Adapter "trashschedule" is not installed. Adapter "tunnelbroker-endpoint-updater" is not installed. Adapter "tuya" is not installed. Adapter "tvspielfilm" is not installed. Adapter "unifi" is not installed. Adapter "upnp" is not installed. Adapter "vaillant" is not installed. Adapter "valloxmv" is not installed. Adapter "vcard" is not installed. Adapter "velux" is not installed. Adapter "viessmann" is not installed. Adapter "virtualpowermeter" is not installed. Adapter "vis" is not installed. Adapter "vis-bars" is not installed. Adapter "vis-canvas-gauges" is not installed. Adapter "vis-colorpicker" is not installed. Adapter "vis-fancyswitch" is not installed. Adapter "vis-google-fonts" is not installed. Adapter "vis-history" is not installed. Adapter "vis-hqwidgets" is not installed. Adapter "vis-icontwo" is not installed. Adapter "vis-inventwo" is not installed. Adapter "vis-jqui-mfd" is not installed. Adapter "vis-justgage" is not installed. Adapter "vis-keyboard" is not installed. Adapter "vis-lcars" is not installed. Adapter "vis-map" is not installed. Adapter "vis-material-advanced" is not installed. Adapter "vis-metro" is not installed. Adapter "vis-players" is not installed. Adapter "vis-plumb" is not installed. Adapter "vis-rgraph" is not installed. Adapter "vis-timeandweather" is not installed. Adapter "vis-weather" is not installed. Adapter "vr200" is not installed. Adapter "vw-connect" is not installed. Adapter "weatherunderground" is not installed. Adapter "web" is not installed. Adapter "weishaupt-wem" is not installed. Adapter "whatsapp-cmb" is not installed. Adapter "wiffi-wz" is not installed. Adapter "wifilight" is not installed. Adapter "windows-control" is not installed. Adapter "wled" is not installed. Adapter "wm-bus" is not installed. Adapter "wolf" is not installed. Adapter "worx" is not installed. Adapter "xbox" is not installed. Adapter "xs1" is not installed. Adapter "yahka" is not installed. Adapter "yamaha" is not installed. Adapter "yeelight-2" is not installed. Adapter "youtube" is not installed. Adapter "yr" is not installed. Adapter "zigbee" is up to date. Adapter "zont" is not installed. Adapter "zwave" is not installed. Adapter "zwave2" is not installed.pi@second-device:/opt/iobroker $ who -r Runlevel 3 2020-12-05 00:16 -
@Thomas-Braun sagte in Zigbee Adapter v1.2.1 immer Rot:
dmesg
Momentan habe ich das Gefühl er läuft wieder flüssigerpi@second-device:/opt/iobroker $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=b63917fa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939088K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23472K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 630 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 822 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26394 entries in 78 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000023] Switching to timer-based delay loop, resolution 52ns [ 0.000291] Console: colour dummy device 80x30 [ 0.000912] console [tty1] enabled [ 0.000971] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001016] pid_max: default: 32768 minimum: 301 [ 0.001375] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001411] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002347] CPU: Testing write buffer coherency: ok [ 0.002835] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003503] Setting up static identity map for 0x100000 - 0x10003c [ 0.003668] rcu: Hierarchical SRCU implementation. [ 0.004483] smp: Bringing up secondary CPUs ... [ 0.005347] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006275] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007138] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.007258] smp: Brought up 1 node, 4 CPUs [ 0.007340] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.007364] CPU: All CPU(s) started in HYP mode. [ 0.007385] CPU: Virtualization extensions available. [ 0.008377] devtmpfs: initialized [ 0.021391] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.021666] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021714] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.022322] pinctrl core: initialized pinctrl subsystem [ 0.023192] NET: Registered protocol family 16 [ 0.026148] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.031851] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.031887] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.032108] Serial: AMBA PL011 UART driver [ 0.034417] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.069287] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.071214] SCSI subsystem initialized [ 0.071460] usbcore: registered new interface driver usbfs [ 0.071541] usbcore: registered new interface driver hub [ 0.071654] usbcore: registered new device driver usb [ 0.090306] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:06, variant start [ 0.100133] raspberrypi-firmware soc:firmware: Firmware hash is 0e6daa5106dd4164474616408e0dc24f997ffcf3 [ 0.111763] clocksource: Switched to clocksource arch_sys_counter [ 0.200898] VFS: Disk quotas dquot_6.6.0 [ 0.201009] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.201187] FS-Cache: Loaded [ 0.201411] CacheFiles: Loaded [ 0.211409] NET: Registered protocol family 2 [ 0.212232] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.212296] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.212428] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.212632] TCP: Hash tables configured (established 8192 bind 8192) [ 0.212792] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.212859] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.213188] NET: Registered protocol family 1 [ 0.213759] RPC: Registered named UNIX socket transport module. [ 0.213787] RPC: Registered udp transport module. [ 0.213809] RPC: Registered tcp transport module. [ 0.213830] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.215531] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.218572] Initialise system trusted keyrings [ 0.218779] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.228775] FS-Cache: Netfs 'nfs' registered for caching [ 0.229375] NFS: Registering the id_resolver key type [ 0.229421] Key type id_resolver registered [ 0.229443] Key type id_legacy registered [ 0.229475] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.231831] Key type asymmetric registered [ 0.231862] Asymmetric key parser 'x509' registered [ 0.231930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.232111] io scheduler noop registered [ 0.232136] io scheduler deadline registered (default) [ 0.232327] io scheduler cfq registered [ 0.232351] io scheduler mq-deadline registered (default) [ 0.232375] io scheduler kyber registered [ 0.234557] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.244048] Console: switching to colour frame buffer device 82x26 [ 0.250859] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.257580] bcm2835-rng 3f104000.rng: hwrng registered [ 0.260249] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.265563] vc-sm: Videocore shared memory driver [ 0.268313] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.284199] brd: module loaded [ 0.296887] loop: module loaded [ 0.299924] Loading iSCSI transport class v2.0-870. [ 0.303104] libphy: Fixed MDIO Bus: probed [ 0.305611] usbcore: registered new interface driver lan78xx [ 0.308070] usbcore: registered new interface driver smsc95xx [ 0.310423] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.340728] dwc_otg 3f980000.usb: base=(ptrval) [ 0.543352] Core Release: 2.80a [ 0.545735] Setting default values for core params [ 0.548177] Finished setting default values for core params [ 0.750922] Using Buffer DMA mode [ 0.753331] Periodic Transfer Interrupt Enhancement - disabled [ 0.755756] Multiprocessor Interrupt Enhancement - disabled [ 0.758126] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.760462] Dedicated Tx FIFOs mode [ 0.763211] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024 [ 0.767782] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.778689] dwc_otg: Microframe scheduler enabled [ 0.778743] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.780962] WARN::hcd_init_fiq:458: FIQ ASM at 80654f4c length 36 [ 0.783173] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 0.785454] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.787711] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.790032] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.792362] Init: Port Power? op_state=1 [ 0.794601] Init: Power Port (0) [ 0.797016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.801518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.803959] usb usb1: Product: DWC OTG Controller [ 0.806328] usb usb1: Manufacturer: Linux 4.19.66-v7+ dwc_otg_hcd [ 0.808748] usb usb1: SerialNumber: 3f980000.usb [ 0.811680] hub 1-0:1.0: USB hub found [ 0.813989] hub 1-0:1.0: 1 port detected [ 0.816735] dwc_otg: FIQ enabled [ 0.816741] dwc_otg: NAK holdoff enabled [ 0.816747] dwc_otg: FIQ split-transaction FSM enabled [ 0.816757] Module dwc_common_port init [ 0.817033] usbcore: registered new interface driver usb-storage [ 0.819479] mousedev: PS/2 mouse device common for all mice [ 0.822641] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.825264] bcm2835-cpufreq: min=600000 max=1400000 [ 0.828067] sdhci: Secure Digital Host Controller Interface driver [ 0.830477] sdhci: Copyright(c) Pierre Ossman [ 0.833275] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 0.836189] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.838858] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.842948] ledtrig-cpu: registered to indicate activity on CPUs [ 0.845671] hidraw: raw HID events driver (C) Jiri Kosina [ 0.848413] usbcore: registered new interface driver usbhid [ 0.851037] usbhid: USB HID core driver [ 0.854355] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.858430] [vc_sm_connected_init]: start [ 0.867115] [vc_sm_connected_init]: end - returning 0 [ 0.870646] Initializing XFRM netlink socket [ 0.873106] NET: Registered protocol family 17 [ 0.875607] Key type dns_resolver registered [ 0.878445] Registering SWP/SWPB emulation handler [ 0.881505] registered taskstats version 1 [ 0.883936] Loading compiled-in X.509 certificates [ 0.893541] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.896066] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.902781] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.905308] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 0.932537] sdhost: log_buf @ (ptrval) (fad13000) [ 0.969926] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.973923] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.977780] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.982785] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.984906] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.988262] of_cfs_init [ 0.990400] of_cfs_init: OK [ 0.992931] Waiting for root device PARTUUID=b63917fa-02... [ 1.041886] Indeed it is in host mode hprt0 = 00021501 [ 1.108822] random: fast init done [ 1.127286] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.135321] mmc0: new high speed SDHC card at address aaaa [ 1.138774] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 1.145250] mmc1: new high speed SDIO card at address 0001 [ 1.148032] mmcblk0: p1 p2 [ 1.185288] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.189589] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.199995] devtmpfs: mounted [ 1.207518] Freeing unused kernel memory: 1024K [ 1.212191] Run /sbin/init as init process [ 1.251812] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.254480] Indeed it is in host mode hprt0 = 00001101 [ 1.492116] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.497449] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.501002] hub 1-1:1.0: USB hub found [ 1.503961] hub 1-1:1.0: 4 ports detected [ 1.674572] systemd[1]: System time before build time, advancing clock. [ 1.821854] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.826255] NET: Registered protocol family 10 [ 1.830252] Segment Routing with IPv6 [ 1.861332] random: systemd: uninitialized urandom read (16 bytes read) [ 1.866558] random: systemd: uninitialized urandom read (16 bytes read) [ 1.875267] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.884066] systemd[1]: Detected architecture arm. [ 1.907721] systemd[1]: Set hostname to <second-device>. [ 1.952378] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.958310] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.967141] hub 1-1.1:1.0: USB hub found [ 1.970356] hub 1-1.1:1.0: 3 ports detected [ 1.979922] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read) [ 2.291831] usb 1-1.1.2: new full-speed USB device number 4 using dwc_otg [ 2.394023] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.426542] systemd[1]: Reached target Swap. [ 2.432897] systemd[1]: Listening on udev Control Socket. [ 2.439623] usb 1-1.1.2: New USB device found, idVendor=0451, idProduct=16a8, bcdDevice= 0.09 [ 2.440023] systemd[1]: Created slice System Slice. [ 2.445224] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.445233] usb 1-1.1.2: Product: TI CC2531 USB CDC [ 2.445241] usb 1-1.1.2: Manufacturer: Texas Instruments [ 2.445255] usb 1-1.1.2: SerialNumber: __0X00124B0019361A08 [ 2.469088] systemd[1]: Mounting RPC Pipe File System... [ 2.475704] systemd[1]: Listening on udev Kernel Socket. [ 2.483298] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.771896] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg [ 2.902452] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 2.902466] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.081690] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.169123] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 3.170424] libphy: lan78xx-mdiobus: probed [ 3.192176] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 3.225773] systemd-journald[115]: Received request to flush runtime journal from PID 1 [ 3.667378] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.669832] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.669846] [vc_sm_connected_init]: start [ 3.684505] [vc_sm_connected_init]: installed successfully [ 3.764715] media: Linux media interface: v0.10 [ 3.799831] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.802412] videodev: Linux video capture interface: v2.00 [ 3.832662] bcm2835_audio soc:audio: card created with 8 channels [ 3.875478] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.875491] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.886157] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 3.890716] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.913608] cdc_acm 1-1.1.2:1.0: ttyACM0: USB ACM device [ 3.915787] usbcore: registered new interface driver cdc_acm [ 3.915798] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.922499] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.922513] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.928420] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.928435] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.936024] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.936038] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.998460] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.074413] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.169460] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.178149] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.179370] usbcore: registered new interface driver brcmfmac [ 4.471522] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.486040] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 5.226489] uart-pl011 3f201000.serial: no DMA platform data [ 5.426578] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 5.462044] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.462080] brcmfmac: power management disabled [ 5.739342] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.768813] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.681158] Bluetooth: Core ver 2.22 [ 11.681255] NET: Registered protocol family 31 [ 11.681262] Bluetooth: HCI device and connection manager initialized [ 11.681285] Bluetooth: HCI socket layer initialized [ 11.681299] Bluetooth: L2CAP socket layer initialized [ 11.681338] Bluetooth: SCO socket layer initialized [ 11.697990] Bluetooth: HCI UART driver ver 2.3 [ 11.698005] Bluetooth: HCI UART protocol H4 registered [ 11.698136] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 11.698367] Bluetooth: HCI UART protocol Broadcom registered [ 11.901134] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.901141] Bluetooth: BNEP filters: protocol multicast [ 11.901153] Bluetooth: BNEP socket layer initialized [ 538.220402] random: crng init done [ 538.220413] random: 7 urandom warning(s) missed due to ratelimiting -
@Thomas-Braun sagte in Zigbee Adapter v1.2.1 immer Rot:
dmesg
Momentan habe ich das Gefühl er läuft wieder flüssigerpi@second-device:/opt/iobroker $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=b63917fa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939088K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23472K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 630 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 822 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26394 entries in 78 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000023] Switching to timer-based delay loop, resolution 52ns [ 0.000291] Console: colour dummy device 80x30 [ 0.000912] console [tty1] enabled [ 0.000971] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001016] pid_max: default: 32768 minimum: 301 [ 0.001375] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001411] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002347] CPU: Testing write buffer coherency: ok [ 0.002835] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003503] Setting up static identity map for 0x100000 - 0x10003c [ 0.003668] rcu: Hierarchical SRCU implementation. [ 0.004483] smp: Bringing up secondary CPUs ... [ 0.005347] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006275] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007138] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.007258] smp: Brought up 1 node, 4 CPUs [ 0.007340] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.007364] CPU: All CPU(s) started in HYP mode. [ 0.007385] CPU: Virtualization extensions available. [ 0.008377] devtmpfs: initialized [ 0.021391] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.021666] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021714] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.022322] pinctrl core: initialized pinctrl subsystem [ 0.023192] NET: Registered protocol family 16 [ 0.026148] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.031851] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.031887] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.032108] Serial: AMBA PL011 UART driver [ 0.034417] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.069287] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.071214] SCSI subsystem initialized [ 0.071460] usbcore: registered new interface driver usbfs [ 0.071541] usbcore: registered new interface driver hub [ 0.071654] usbcore: registered new device driver usb [ 0.090306] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:06, variant start [ 0.100133] raspberrypi-firmware soc:firmware: Firmware hash is 0e6daa5106dd4164474616408e0dc24f997ffcf3 [ 0.111763] clocksource: Switched to clocksource arch_sys_counter [ 0.200898] VFS: Disk quotas dquot_6.6.0 [ 0.201009] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.201187] FS-Cache: Loaded [ 0.201411] CacheFiles: Loaded [ 0.211409] NET: Registered protocol family 2 [ 0.212232] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.212296] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.212428] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.212632] TCP: Hash tables configured (established 8192 bind 8192) [ 0.212792] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.212859] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.213188] NET: Registered protocol family 1 [ 0.213759] RPC: Registered named UNIX socket transport module. [ 0.213787] RPC: Registered udp transport module. [ 0.213809] RPC: Registered tcp transport module. [ 0.213830] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.215531] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.218572] Initialise system trusted keyrings [ 0.218779] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.228775] FS-Cache: Netfs 'nfs' registered for caching [ 0.229375] NFS: Registering the id_resolver key type [ 0.229421] Key type id_resolver registered [ 0.229443] Key type id_legacy registered [ 0.229475] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.231831] Key type asymmetric registered [ 0.231862] Asymmetric key parser 'x509' registered [ 0.231930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.232111] io scheduler noop registered [ 0.232136] io scheduler deadline registered (default) [ 0.232327] io scheduler cfq registered [ 0.232351] io scheduler mq-deadline registered (default) [ 0.232375] io scheduler kyber registered [ 0.234557] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.244048] Console: switching to colour frame buffer device 82x26 [ 0.250859] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.257580] bcm2835-rng 3f104000.rng: hwrng registered [ 0.260249] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.265563] vc-sm: Videocore shared memory driver [ 0.268313] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.284199] brd: module loaded [ 0.296887] loop: module loaded [ 0.299924] Loading iSCSI transport class v2.0-870. [ 0.303104] libphy: Fixed MDIO Bus: probed [ 0.305611] usbcore: registered new interface driver lan78xx [ 0.308070] usbcore: registered new interface driver smsc95xx [ 0.310423] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.340728] dwc_otg 3f980000.usb: base=(ptrval) [ 0.543352] Core Release: 2.80a [ 0.545735] Setting default values for core params [ 0.548177] Finished setting default values for core params [ 0.750922] Using Buffer DMA mode [ 0.753331] Periodic Transfer Interrupt Enhancement - disabled [ 0.755756] Multiprocessor Interrupt Enhancement - disabled [ 0.758126] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.760462] Dedicated Tx FIFOs mode [ 0.763211] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024 [ 0.767782] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.778689] dwc_otg: Microframe scheduler enabled [ 0.778743] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.780962] WARN::hcd_init_fiq:458: FIQ ASM at 80654f4c length 36 [ 0.783173] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 0.785454] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.787711] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.790032] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.792362] Init: Port Power? op_state=1 [ 0.794601] Init: Power Port (0) [ 0.797016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.801518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.803959] usb usb1: Product: DWC OTG Controller [ 0.806328] usb usb1: Manufacturer: Linux 4.19.66-v7+ dwc_otg_hcd [ 0.808748] usb usb1: SerialNumber: 3f980000.usb [ 0.811680] hub 1-0:1.0: USB hub found [ 0.813989] hub 1-0:1.0: 1 port detected [ 0.816735] dwc_otg: FIQ enabled [ 0.816741] dwc_otg: NAK holdoff enabled [ 0.816747] dwc_otg: FIQ split-transaction FSM enabled [ 0.816757] Module dwc_common_port init [ 0.817033] usbcore: registered new interface driver usb-storage [ 0.819479] mousedev: PS/2 mouse device common for all mice [ 0.822641] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.825264] bcm2835-cpufreq: min=600000 max=1400000 [ 0.828067] sdhci: Secure Digital Host Controller Interface driver [ 0.830477] sdhci: Copyright(c) Pierre Ossman [ 0.833275] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 0.836189] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.838858] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.842948] ledtrig-cpu: registered to indicate activity on CPUs [ 0.845671] hidraw: raw HID events driver (C) Jiri Kosina [ 0.848413] usbcore: registered new interface driver usbhid [ 0.851037] usbhid: USB HID core driver [ 0.854355] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.858430] [vc_sm_connected_init]: start [ 0.867115] [vc_sm_connected_init]: end - returning 0 [ 0.870646] Initializing XFRM netlink socket [ 0.873106] NET: Registered protocol family 17 [ 0.875607] Key type dns_resolver registered [ 0.878445] Registering SWP/SWPB emulation handler [ 0.881505] registered taskstats version 1 [ 0.883936] Loading compiled-in X.509 certificates [ 0.893541] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.896066] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.902781] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.905308] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 0.932537] sdhost: log_buf @ (ptrval) (fad13000) [ 0.969926] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.973923] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.977780] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.982785] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.984906] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.988262] of_cfs_init [ 0.990400] of_cfs_init: OK [ 0.992931] Waiting for root device PARTUUID=b63917fa-02... [ 1.041886] Indeed it is in host mode hprt0 = 00021501 [ 1.108822] random: fast init done [ 1.127286] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.135321] mmc0: new high speed SDHC card at address aaaa [ 1.138774] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 1.145250] mmc1: new high speed SDIO card at address 0001 [ 1.148032] mmcblk0: p1 p2 [ 1.185288] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.189589] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.199995] devtmpfs: mounted [ 1.207518] Freeing unused kernel memory: 1024K [ 1.212191] Run /sbin/init as init process [ 1.251812] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.254480] Indeed it is in host mode hprt0 = 00001101 [ 1.492116] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.497449] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.501002] hub 1-1:1.0: USB hub found [ 1.503961] hub 1-1:1.0: 4 ports detected [ 1.674572] systemd[1]: System time before build time, advancing clock. [ 1.821854] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.826255] NET: Registered protocol family 10 [ 1.830252] Segment Routing with IPv6 [ 1.861332] random: systemd: uninitialized urandom read (16 bytes read) [ 1.866558] random: systemd: uninitialized urandom read (16 bytes read) [ 1.875267] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.884066] systemd[1]: Detected architecture arm. [ 1.907721] systemd[1]: Set hostname to <second-device>. [ 1.952378] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.958310] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.967141] hub 1-1.1:1.0: USB hub found [ 1.970356] hub 1-1.1:1.0: 3 ports detected [ 1.979922] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read) [ 2.291831] usb 1-1.1.2: new full-speed USB device number 4 using dwc_otg [ 2.394023] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.426542] systemd[1]: Reached target Swap. [ 2.432897] systemd[1]: Listening on udev Control Socket. [ 2.439623] usb 1-1.1.2: New USB device found, idVendor=0451, idProduct=16a8, bcdDevice= 0.09 [ 2.440023] systemd[1]: Created slice System Slice. [ 2.445224] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.445233] usb 1-1.1.2: Product: TI CC2531 USB CDC [ 2.445241] usb 1-1.1.2: Manufacturer: Texas Instruments [ 2.445255] usb 1-1.1.2: SerialNumber: __0X00124B0019361A08 [ 2.469088] systemd[1]: Mounting RPC Pipe File System... [ 2.475704] systemd[1]: Listening on udev Kernel Socket. [ 2.483298] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.771896] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg [ 2.902452] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 2.902466] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.081690] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.169123] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 3.170424] libphy: lan78xx-mdiobus: probed [ 3.192176] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 3.225773] systemd-journald[115]: Received request to flush runtime journal from PID 1 [ 3.667378] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.669832] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.669846] [vc_sm_connected_init]: start [ 3.684505] [vc_sm_connected_init]: installed successfully [ 3.764715] media: Linux media interface: v0.10 [ 3.799831] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.802412] videodev: Linux video capture interface: v2.00 [ 3.832662] bcm2835_audio soc:audio: card created with 8 channels [ 3.875478] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.875491] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.886157] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 3.890716] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.913608] cdc_acm 1-1.1.2:1.0: ttyACM0: USB ACM device [ 3.915787] usbcore: registered new interface driver cdc_acm [ 3.915798] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.922499] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.922513] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.928420] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.928435] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.936024] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.936038] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.998460] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.074413] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.169460] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.178149] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.179370] usbcore: registered new interface driver brcmfmac [ 4.471522] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.486040] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 5.226489] uart-pl011 3f201000.serial: no DMA platform data [ 5.426578] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 5.462044] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.462080] brcmfmac: power management disabled [ 5.739342] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.768813] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.681158] Bluetooth: Core ver 2.22 [ 11.681255] NET: Registered protocol family 31 [ 11.681262] Bluetooth: HCI device and connection manager initialized [ 11.681285] Bluetooth: HCI socket layer initialized [ 11.681299] Bluetooth: L2CAP socket layer initialized [ 11.681338] Bluetooth: SCO socket layer initialized [ 11.697990] Bluetooth: HCI UART driver ver 2.3 [ 11.698005] Bluetooth: HCI UART protocol H4 registered [ 11.698136] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 11.698367] Bluetooth: HCI UART protocol Broadcom registered [ 11.901134] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.901141] Bluetooth: BNEP filters: protocol multicast [ 11.901153] Bluetooth: BNEP socket layer initialized [ 538.220402] random: crng init done [ 538.220413] random: 7 urandom warning(s) missed due to ratelimiting@Mapio90
Das System ist auf Stand?sudo apt update -
@Mapio90
Das System ist auf Stand?sudo apt updateja scheint so.
pi@second-device:/opt/iobroker $ sudo apt update Holen:1 http://archive.raspberrypi.org/debian stretch InRelease [25,4 kB] Holen:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15,0 kB] Holen:3 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages [11,7 MB] OK:4 https://deb.nodesource.com/node_12.x stretch InRelease Es wurden 11,7 MB in 8 s geholt (1.325 kB/s). Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Alle Pakete sind aktuell. -
ja scheint so.
pi@second-device:/opt/iobroker $ sudo apt update Holen:1 http://archive.raspberrypi.org/debian stretch InRelease [25,4 kB] Holen:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15,0 kB] Holen:3 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages [11,7 MB] OK:4 https://deb.nodesource.com/node_12.x stretch InRelease Es wurden 11,7 MB in 8 s geholt (1.325 kB/s). Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Alle Pakete sind aktuell.@Mapio90
Okay, dann dürfte da ja jetzt alles laufen.iobroker list adapters | grep -i zigbee -
@Mapio90
Okay, dann dürfte da ja jetzt alles laufen.iobroker list adapters | grep -i zigbee@Thomas-Braun sagte in Zigbee Adapter v1.2.1 immer Rot:
iobroker list adapters | grep -i zigbee
Adapter wurde auch wieder nicht aktuallisioert
pi@second-device:/opt/iobroker $ iobroker list adapters | grep -i zigbee system.adapter.zigbee : zigbee - v0.10.3 -
@Thomas-Braun sagte in Zigbee Adapter v1.2.1 immer Rot:
iobroker list adapters | grep -i zigbee
Adapter wurde auch wieder nicht aktuallisioert
pi@second-device:/opt/iobroker $ iobroker list adapters | grep -i zigbee system.adapter.zigbee : zigbee - v0.10.3which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejsiobroker stop iobroker update cd /opt/iobroker npm i iobroker.zigbee@1.3.1 --force iobroker upload all iobroker start -
@Thomas-Braun sagte in Zigbee Adapter v1.2.1 immer Rot:
iobroker list adapters | grep -i zigbee
Adapter wurde auch wieder nicht aktuallisioert
pi@second-device:/opt/iobroker $ iobroker list adapters | grep -i zigbee system.adapter.zigbee : zigbee - v0.10.3 -
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejsiobroker stop iobroker update cd /opt/iobroker npm i iobroker.zigbee@1.3.1 --force iobroker upload all iobroker startSchaut nicht schlecht aus.
pi@second-device:/opt/iobroker $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v12.20.0 /usr/bin/node v12.20.0 /usr/bin/npm 6.14.8 nodejs: Installiert: 12.20.0-1nodesource1 Installationskandidat: 12.20.0-1nodesource1 Versionstabelle: *** 12.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_12.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 500 500 http://archive.raspberrypi.org/debian stretch/main armhf Packages 4.8.2~dfsg-1 500 500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packagespi@second-device:~ $ iobroker stop pi@second-device:~ $ iobroker update Used repository: default hash changed or no sources cached => force download of new sources update done Adapter "admin" : 4.1.10 , installed 4.1.10 Adapter "alarm" : 1.8.1 Adapter "alexa2" : 3.3.5 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 1.1.0 Adapter "artnet" : 1.2.2 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.7.0 , installed 1.7.0 Adapter "beckhoff" : 1.2.2 Adapter "benq" : 0.2.0 Adapter "binance" : 1.1.3 Adapter "ble" : 0.12.0 , installed 0.12.0 Adapter "bmw" : 1.3.3 Adapter "bosesoundtouch": 0.2.4 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.7.3 Adapter "broadlink2" : 2.0.3 Adapter "bsblan" : 0.2.0 Adapter "bshb" : 0.1.10 Adapter "chromecast" : 2.3.1 Adapter "cloud" : 3.1.0 Adapter "comfoair" : 0.3.2 Adapter "contactid" : 1.0.1 Adapter "coronavirus-statistics": 0.6.3 Adapter "countdown" : 1.1.0 Adapter "cul" : 1.3.3 Adapter "daikin" : 1.1.3 Adapter "daswetter" : 3.0.4 , installed 3.0.4 Adapter "deconz" : 1.3.11 Adapter "denon" : 1.7.7 Adapter "device-reminder": 0.5.4 Adapter "devices" : 0.3.13 Adapter "digitalstrom" : 0.5.5 Adapter "discovergy" : 0.5.0 Adapter "discovery" : 2.3.11 , installed 2.3.11 Adapter "doorio" : 1.1.1 Adapter "ds18b20" : 1.1.5 Adapter "dwd" : 2.5.1 Adapter "ebus" : 2.1.1 Adapter "ecovacs-deebot": 1.0.3 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.7 Adapter "emby" : 1.0.2 Adapter "energymanager" : 1.2.3 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "exchangerates" : 0.0.13 Adapter "fakeroku" : 0.2.1 Adapter "fb-checkpresence": 1.1.0 Adapter "feiertage" : 1.0.17 Adapter "fhem" : 1.5.3 Adapter "find-my-iphone": 0.2.15 Adapter "firetv" : 0.0.27 Adapter "flot" : 1.10.4 Adapter "foobar2000" : 2.0.3 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.2.4 Adapter "fronius" : 1.0.5 Adapter "frontier_silicon": 0.0.10 Adapter "fullcalendar" : 1.1.0 Adapter "fullybrowser" : 2.0.1 Adapter "g-homa" : 0.5.3 Adapter "geofency" : 0.3.2 Adapter "growatt" : 0.0.14 Adapter "gruenbeck" : 0.0.18 Adapter "habpanel" : 0.4.3 Adapter "haier" : 1.0.2 Adapter "ham" : 1.1.2 Adapter "ham-wemo" : 1.1.0 Adapter "harmony" : 1.2.2 Adapter "heatingcontrol": 1.0.0 Adapter "heos" : 1.6.1 Adapter "heytech" : 1.0.0 Adapter "hid" : 0.1.17 Adapter "history" : 1.9.10 Adapter "hm-rega" : 2.6.24 Adapter "hm-rpc" : 1.14.24 Adapter "hmip" : 1.5.0 Adapter "homeconnect" : 0.0.30 Adapter "homee" : 1.0.7 Adapter "homepilot" : 1.0.3 Adapter "hp-ilo" : 1.0.6 Adapter "hs100" : 2.0.1 Adapter "hue" : 3.3.8 Adapter "hue-extended" : 2.0.0 Adapter "i2c" : 1.1.1 Adapter "ical" : 1.7.4 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.9.1 Adapter "info" : 1.7.10 Adapter "innogy-smarthome": 0.3.6 Adapter "iogo" : 0.5.10 Adapter "iot" : 1.5.3 Adapter "iqontrol" : 1.5.0 Adapter "jarvis" : 1.0.9 Adapter "javascript" : 4.8.4 Adapter "jeelink" : 0.1.0 Controller "js-controller" : 3.1.6 , installed 3.1.6 Adapter "kecontact" : 1.0.1 Adapter "klf200" : 1.0.1 Adapter "km200" : 1.1.6 Adapter "knmi-weather" : 1.0.0 Adapter "knx" : 1.0.39 Adapter "kodi" : 2.0.4 Adapter "kostal-piko-ba": 1.1.3 Adapter "kress" : 2.5.5 Adapter "lametric" : 0.0.9 Adapter "landroid" : 1.0.3 Adapter "lcn" : 1.0.2 Adapter "legrand-ecocompteur": 1.0.0 Adapter "letrika_comgw" : 0.0.5 Adapter "lgtv" : 1.1.10 Adapter "lgtv-rs" : 0.1.0 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.0 Adapter "lightify" : 0.2.16 Adapter "link" : 0.5.9 Adapter "linkeddevices" : 1.2.2 Adapter "linux-control" : 1.0.1 Adapter "logparser" : 1.1.0 Adapter "lovelace" : 1.0.16 Adapter "loxone" : 2.0.2 Adapter "luftdaten" : 1.0.1 Adapter "lupusec" : 1.2.9 Adapter "luxtronik1" : 0.2.2 Adapter "material" : 0.13.9 Adapter "maxcube" : 1.0.2 Adapter "maxcul" : 1.3.1 Adapter "mbus" : 2.3.1 Adapter "mclighting" : 0.1.1 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "melcloud" : 1.0.6 Adapter "mercedesme" : 0.0.21 Adapter "mercury" : 0.1.1 Adapter "meross" : 1.5.0 Adapter "meteoalarm" : 1.0.9 Adapter "midea" : 0.0.6 Adapter "miele" : 0.1.5 Adapter "mielecloudservice": 2.0.0 Adapter "mihome" : 1.3.5 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.1 Adapter "mihome-vacuum" : 2.1.1 Adapter "mikrotik" : 1.0.11 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.2.7 Adapter "minuvis" : 1.0.0 Adapter "mobile" : 1.0.1 Adapter "modbus" : 3.1.10 Adapter "moma" : 1.2.7 Adapter "mpd" : 1.0.5 Adapter "mqtt" : 2.1.9 Adapter "mqtt-client" : 1.3.1 Adapter "musiccast" : 0.1.3 Adapter "mydlink" : 1.1.7 Adapter "mysensors" : 2.0.1 Adapter "nanoleaf-lightpanels": 1.0.6 Adapter "nello" : 2.0.6 Adapter "netatmo" : 1.3.3 Adapter "netatmo-crawler": 0.3.8 Adapter "nibeuplink" : 0.3.0 Adapter "nina" : 0.0.22 Adapter "node-red" : 2.0.1 Adapter "nuki" : 1.4.2 Adapter "nuki-extended" : 2.3.0 Adapter "nut" : 1.1.3 Adapter "octoprint" : 1.0.1 Adapter "odl" : 1.0.7 Adapter "oilfox" : 0.0.5 Adapter "onkyo" : 2.0.3 Adapter "onvif" : 0.4.4 Adapter "openhab" : 1.1.0 Adapter "openligadb" : 1.1.0 Adapter "openweathermap": 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.4 Adapter "owntracks" : 0.6.3 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.0.7 Adapter "phantomjs" : 1.1.2 Adapter "pi-hole" : 1.3.1 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.3.0 Adapter "ping" : 1.4.12 Adapter "places" : 1.0.0 Adapter "plex" : 0.8.11 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.6 Adapter "proxmox" : 1.0.1 Adapter "proxy" : 1.2.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 2.0.3 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 1.0.9 Adapter "radiohead" : 1.0.7 Adapter "rflink" : 2.1.6 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.1.3 Adapter "robonect" : 0.1.3 Adapter "roomba" : 1.1.1 Adapter "rpi2" : 1.2.0 Adapter "s7" : 1.1.9 Adapter "samsung" : 0.2.9 Adapter "sayit" : 1.12.2 Adapter "sbfspot" : 4.0.2 Adapter "scenes" : 2.3.0 Adapter "schoolfree" : 0.7.0 Adapter "schwoerer-ventcube": 1.3.0 Adapter "shelly" : 4.0.3 Adapter "shuttercontrol": 1.0.4 Adapter "sia" : 1.0.4 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.4.8 Adapter "smappee" : 0.2.2 Adapter "smartcontrol" : 1.2.1 Adapter "smartgarden" : 1.0.1 Adapter "smartmeter" : 3.1.6 Adapter "snips" : 1.5.1 Adapter "snmp" : 0.5.0 Adapter "socketio" : 3.0.13 Adapter "solarlog" : 2.0.0 Adapter "solarviewdatareader": 0.2.1 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.7.0 Adapter "sonoff" : 2.3.3 Adapter "sonos" : 2.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.15.3 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 1.0.0 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.2 Adapter "stiebel-isg" : 1.5.1 Adapter "sunnyportal" : 0.1.5 Adapter "swiss-weather-api": 0.3.2 Adapter "synology" : 0.1.18 Adapter "systeminfo" : 0.3.1 Adapter "tahoma" : 0.3.2 Adapter "tankerkoenig" : 2.0.5 Adapter "telegram" : 1.6.0 Adapter "terminal" : 0.1.2 Adapter "tesla-motors" : 0.2.3 Adapter "text2command" : 2.0.5 Adapter "tinker" : 1.1.0 Adapter "tr-064" : 4.2.1 Adapter "tradfri" : 2.6.3 Adapter "trashschedule" : 1.0.3 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 3.4.1 Adapter "tvspielfilm" : 1.0.4 Adapter "unifi" : 0.5.8 Adapter "upnp" : 1.0.16 Adapter "vaillant" : 0.0.10 Adapter "valloxmv" : 1.1.1 Adapter "vcard" : 0.0.9 Adapter "velux" : 0.0.5 Adapter "viessmann" : 1.3.2 Adapter "virtualpowermeter": 1.2.1 Adapter "vis" : 1.3.4 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.2.0 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.7 Adapter "vis-icontwo" : 0.34.0 Adapter "vis-inventwo" : 2.5.11 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.2 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.4 Adapter "vis-material-advanced": 1.3.0 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.6 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 Adapter "vis-weather" : 2.5.2 Adapter "vr200" : 1.0.0 Adapter "vw-connect" : 0.0.15 Adapter "weatherunderground": 3.2.1 Adapter "web" : 3.0.14 Adapter "weishaupt-wem" : 0.0.8 Adapter "whatsapp-cmb" : 0.1.6 Adapter "wiffi-wz" : 2.2.0 Adapter "wifilight" : 1.1.0 Adapter "windows-control": 0.1.5 Adapter "wled" : 0.5.2 Adapter "wm-bus" : 0.1.12 Adapter "wolf" : 1.2.1 Adapter "worx" : 1.2.3 Adapter "xbox" : 0.6.8 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.11.0 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.3 Adapter "youtube" : 1.0.0 Adapter "yr" : 2.0.3 Adapter "zigbee" : 1.3.1 , installed 1.3.1 Adapter "zont" : 0.5.3 Adapter "zwave" : 2.0.1 Adapter "zwave2" : 1.7.10 pi@second-device:~ $ cd /opt/iobroker pi@second-device:/opt/iobroker $ npm i iobroker.zigbee@1.3.1 --force npm WARN using --force I sure hope you know what you are doing. npm WARN winston-syslog@2.4.4 requires a peer of winston@^3.0.0 but none is installed. You must install peer dependencies yourself. + iobroker.zigbee@1.3.1 updated 1 package in 23.789s 12 packages are looking for funding run `npm fund` for details pi@second-device:/opt/iobroker $ iobroker upload all upload [250] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tuya_rb280.png img/tuya_rb280.png image/png upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_gu10_color.png img/philips_hue_gu10_color.png image/png upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lumi_router.png img/lumi_router.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_recessed_spot_light.png img/ikea_recessed_spot_light.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_bulb_E27.png img/ikea_bulb_E27.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hive.png img/hive.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gira_4_buttons.png img/gira_4_buttons.png image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ewelink_DS01.png img/ewelink_DS01.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_neutral1.png img/ctrl_neutral1.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_902010_24.png img/bitron_902010_24.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZHS15.png img/ZHS15.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/NAS-AB02B0.png img/NAS-AB02B0.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Moes_Wall_Thermostat.png img/Moes_Wall_Thermostat.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/HY08WE.png img/HY08WE.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ_R8_8.png img/DIYRuZ_R8_8.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ_Geiger.png img/DIYRuZ_Geiger.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ_FreePad.png img/DIYRuZ_FreePad.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ_Flower.png img/DIYRuZ_Flower.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DGNWG05LM.png img/DGNWG05LM.png image/png upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Bitron_AV201021A.png img/Bitron_AV201021A.png image/png upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/BW-IS5.png img/BW-IS5.png image/png upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/BW-IS3.png img/BW-IS3.png image/png upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/AV2010_32.png img/AV2010_32.png image/png upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/adapter-settings.js adapter-settings.js application/javascript Update "system.adapter.zigbee.1" No alive host found which has the adapter web installed! No upload possible. Skipped. No alive host found which has the adapter tr-064 installed! No upload possible. Skipped. No alive host found which has the adapter text2command installed! No upload possible. Skipped. No alive host found which has the adapter terminal installed! No upload possible. Skipped. No alive host found which has the adapter telegram installed! No upload possible. Skipped. No alive host found which has the adapter sonoff installed! No upload possible. Skipped. No alive host found which has the adapter socketio installed! No upload possible. Skipped. No alive host found which has the adapter simple-api installed! No upload possible. Skipped. No alive host found which has the adapter scenes installed! No upload possible. Skipped. No alive host found which has the adapter samsung installed! No upload possible. Skipped. No alive host found which has the adapter mobile installed! No upload possible. Skipped. No alive host found which has the adapter mihome-vacuum installed! No upload possible. Skipped. No alive host found which has the adapter javascript installed! No upload possible. Skipped. No alive host found which has the adapter info installed! No upload possible. Skipped. No alive host found which has the adapter flot installed! No upload possible. Skipped. upload [6] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/words.js words.js application/javascript upload [5] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/translateTools.js translateTools.js application/javascript upload [4] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings_m.html settings_m.html text/html upload [3] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings.html settings.html text/html upload [2] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index_m.html index_m.html text/html upload [1] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index.html index.html text/html upload [0] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/discovery.png discovery.png image/png No alive host found which has the adapter digitalstrom installed! No upload possible. Skipped. upload [450] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/galeria2-Beaufort/75.png icons/viento-wind/galeria2-Beaufort/75.png image/png upload [400] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/galeria2-Beaufort/3.png icons/viento-wind/galeria2-Beaufort/3.png image/png upload [350] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/galeria1/16.png icons/viento-wind/galeria1/16.png image/png upload [300] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/Beaufort-White/60.png icons/viento-wind/Beaufort-White/60.png image/png upload [250] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/Beaufort-White/15.png icons/viento-wind/Beaufort-White/15.png image/png upload [200] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria6/11.svg icons/tiempo-weather/galeria6/11.svg image/svg+xml upload [150] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria5/PNG/White/9.png icons/tiempo-weather/galeria5/PNG/White/9.png image/png upload [100] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria4/3.png icons/tiempo-weather/galeria4/3.png image/png upload [90] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria4/11.png icons/tiempo-weather/galeria4/11.png image/png upload [80] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria3/2.png icons/tiempo-weather/galeria3/2.png image/png upload [70] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria3/10.png icons/tiempo-weather/galeria3/10.png image/png upload [60] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria2/19.png icons/tiempo-weather/galeria2/19.png image/png upload [50] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria2/1.png icons/tiempo-weather/galeria2/1.png image/png upload [40] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria1/18.png icons/tiempo-weather/galeria1/18.png image/png upload [30] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/9.png icons/luna-moon/9.png image/png upload [20] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/26.png icons/luna-moon/26.png image/png upload [19] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/25.png icons/luna-moon/25.png image/png upload [18] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/24.png icons/luna-moon/24.png image/png upload [17] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/23.png icons/luna-moon/23.png image/png upload [16] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/22.png icons/luna-moon/22.png image/png upload [15] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/21.png icons/luna-moon/21.png image/png upload [14] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/20.png icons/luna-moon/20.png image/png upload [13] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/2.png icons/luna-moon/2.png image/png upload [12] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/19.png icons/luna-moon/19.png image/png upload [11] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/18.png icons/luna-moon/18.png image/png upload [10] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/17.png icons/luna-moon/17.png image/png upload [9] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/16.png icons/luna-moon/16.png image/png upload [8] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/15.png icons/luna-moon/15.png image/png upload [7] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/14.png icons/luna-moon/14.png image/png upload [6] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/13.png icons/luna-moon/13.png image/png upload [5] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/12.png icons/luna-moon/12.png image/png upload [4] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/11.png icons/luna-moon/11.png image/png upload [3] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/10.png icons/luna-moon/10.png image/png upload [2] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/1.png icons/luna-moon/1.png image/png upload [1] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/0.png icons/luna-moon/0.png image/png upload [0] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/daswettercom.png daswettercom.png image/png No alive host found which has the adapter cloud installed! No upload possible. Skipped. upload [7] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/words.js words.js application/javascript upload [6] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/style.css style.css text/css upload [5] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/index_m.html index_m.html text/html upload [4] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/index.html index.html text/html upload [3] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/build/index.map build/index.map application/json upload [2] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/build/index.js.map build/index.js.map application/json upload [1] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/build/index.js build/index.js application/javascript upload [0] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/ble.png ble.png image/png upload [3] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/words.js words.js application/javascript upload [2] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index_m.html index_m.html text/html upload [1] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index.html index.html text/html upload [0] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/backitup.png backitup.png image/png No alive host found which has the adapter alexa2 installed! No upload possible. Skipped. upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/words.js words.js application/javascript upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index_m.html index_m.html text/html upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index.html index.html text/html upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png pi@second-device:/opt/iobroker $ iobroker start -
Schaut nicht schlecht aus.
pi@second-device:/opt/iobroker $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v12.20.0 /usr/bin/node v12.20.0 /usr/bin/npm 6.14.8 nodejs: Installiert: 12.20.0-1nodesource1 Installationskandidat: 12.20.0-1nodesource1 Versionstabelle: *** 12.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_12.x stretch/main armhf Packages 100 /var/lib/dpkg/status 8.11.1~dfsg-2~bpo9+1 500 500 http://archive.raspberrypi.org/debian stretch/main armhf Packages 4.8.2~dfsg-1 500 500 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packagespi@second-device:~ $ iobroker stop pi@second-device:~ $ iobroker update Used repository: default hash changed or no sources cached => force download of new sources update done Adapter "admin" : 4.1.10 , installed 4.1.10 Adapter "alarm" : 1.8.1 Adapter "alexa2" : 3.3.5 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 1.1.0 Adapter "artnet" : 1.2.2 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.7.0 , installed 1.7.0 Adapter "beckhoff" : 1.2.2 Adapter "benq" : 0.2.0 Adapter "binance" : 1.1.3 Adapter "ble" : 0.12.0 , installed 0.12.0 Adapter "bmw" : 1.3.3 Adapter "bosesoundtouch": 0.2.4 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.7.3 Adapter "broadlink2" : 2.0.3 Adapter "bsblan" : 0.2.0 Adapter "bshb" : 0.1.10 Adapter "chromecast" : 2.3.1 Adapter "cloud" : 3.1.0 Adapter "comfoair" : 0.3.2 Adapter "contactid" : 1.0.1 Adapter "coronavirus-statistics": 0.6.3 Adapter "countdown" : 1.1.0 Adapter "cul" : 1.3.3 Adapter "daikin" : 1.1.3 Adapter "daswetter" : 3.0.4 , installed 3.0.4 Adapter "deconz" : 1.3.11 Adapter "denon" : 1.7.7 Adapter "device-reminder": 0.5.4 Adapter "devices" : 0.3.13 Adapter "digitalstrom" : 0.5.5 Adapter "discovergy" : 0.5.0 Adapter "discovery" : 2.3.11 , installed 2.3.11 Adapter "doorio" : 1.1.1 Adapter "ds18b20" : 1.1.5 Adapter "dwd" : 2.5.1 Adapter "ebus" : 2.1.1 Adapter "ecovacs-deebot": 1.0.3 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.7 Adapter "emby" : 1.0.2 Adapter "energymanager" : 1.2.3 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "exchangerates" : 0.0.13 Adapter "fakeroku" : 0.2.1 Adapter "fb-checkpresence": 1.1.0 Adapter "feiertage" : 1.0.17 Adapter "fhem" : 1.5.3 Adapter "find-my-iphone": 0.2.15 Adapter "firetv" : 0.0.27 Adapter "flot" : 1.10.4 Adapter "foobar2000" : 2.0.3 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.2.4 Adapter "fronius" : 1.0.5 Adapter "frontier_silicon": 0.0.10 Adapter "fullcalendar" : 1.1.0 Adapter "fullybrowser" : 2.0.1 Adapter "g-homa" : 0.5.3 Adapter "geofency" : 0.3.2 Adapter "growatt" : 0.0.14 Adapter "gruenbeck" : 0.0.18 Adapter "habpanel" : 0.4.3 Adapter "haier" : 1.0.2 Adapter "ham" : 1.1.2 Adapter "ham-wemo" : 1.1.0 Adapter "harmony" : 1.2.2 Adapter "heatingcontrol": 1.0.0 Adapter "heos" : 1.6.1 Adapter "heytech" : 1.0.0 Adapter "hid" : 0.1.17 Adapter "history" : 1.9.10 Adapter "hm-rega" : 2.6.24 Adapter "hm-rpc" : 1.14.24 Adapter "hmip" : 1.5.0 Adapter "homeconnect" : 0.0.30 Adapter "homee" : 1.0.7 Adapter "homepilot" : 1.0.3 Adapter "hp-ilo" : 1.0.6 Adapter "hs100" : 2.0.1 Adapter "hue" : 3.3.8 Adapter "hue-extended" : 2.0.0 Adapter "i2c" : 1.1.1 Adapter "ical" : 1.7.4 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.9.1 Adapter "info" : 1.7.10 Adapter "innogy-smarthome": 0.3.6 Adapter "iogo" : 0.5.10 Adapter "iot" : 1.5.3 Adapter "iqontrol" : 1.5.0 Adapter "jarvis" : 1.0.9 Adapter "javascript" : 4.8.4 Adapter "jeelink" : 0.1.0 Controller "js-controller" : 3.1.6 , installed 3.1.6 Adapter "kecontact" : 1.0.1 Adapter "klf200" : 1.0.1 Adapter "km200" : 1.1.6 Adapter "knmi-weather" : 1.0.0 Adapter "knx" : 1.0.39 Adapter "kodi" : 2.0.4 Adapter "kostal-piko-ba": 1.1.3 Adapter "kress" : 2.5.5 Adapter "lametric" : 0.0.9 Adapter "landroid" : 1.0.3 Adapter "lcn" : 1.0.2 Adapter "legrand-ecocompteur": 1.0.0 Adapter "letrika_comgw" : 0.0.5 Adapter "lgtv" : 1.1.10 Adapter "lgtv-rs" : 0.1.0 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.0 Adapter "lightify" : 0.2.16 Adapter "link" : 0.5.9 Adapter "linkeddevices" : 1.2.2 Adapter "linux-control" : 1.0.1 Adapter "logparser" : 1.1.0 Adapter "lovelace" : 1.0.16 Adapter "loxone" : 2.0.2 Adapter "luftdaten" : 1.0.1 Adapter "lupusec" : 1.2.9 Adapter "luxtronik1" : 0.2.2 Adapter "material" : 0.13.9 Adapter "maxcube" : 1.0.2 Adapter "maxcul" : 1.3.1 Adapter "mbus" : 2.3.1 Adapter "mclighting" : 0.1.1 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "melcloud" : 1.0.6 Adapter "mercedesme" : 0.0.21 Adapter "mercury" : 0.1.1 Adapter "meross" : 1.5.0 Adapter "meteoalarm" : 1.0.9 Adapter "midea" : 0.0.6 Adapter "miele" : 0.1.5 Adapter "mielecloudservice": 2.0.0 Adapter "mihome" : 1.3.5 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.1 Adapter "mihome-vacuum" : 2.1.1 Adapter "mikrotik" : 1.0.11 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.2.7 Adapter "minuvis" : 1.0.0 Adapter "mobile" : 1.0.1 Adapter "modbus" : 3.1.10 Adapter "moma" : 1.2.7 Adapter "mpd" : 1.0.5 Adapter "mqtt" : 2.1.9 Adapter "mqtt-client" : 1.3.1 Adapter "musiccast" : 0.1.3 Adapter "mydlink" : 1.1.7 Adapter "mysensors" : 2.0.1 Adapter "nanoleaf-lightpanels": 1.0.6 Adapter "nello" : 2.0.6 Adapter "netatmo" : 1.3.3 Adapter "netatmo-crawler": 0.3.8 Adapter "nibeuplink" : 0.3.0 Adapter "nina" : 0.0.22 Adapter "node-red" : 2.0.1 Adapter "nuki" : 1.4.2 Adapter "nuki-extended" : 2.3.0 Adapter "nut" : 1.1.3 Adapter "octoprint" : 1.0.1 Adapter "odl" : 1.0.7 Adapter "oilfox" : 0.0.5 Adapter "onkyo" : 2.0.3 Adapter "onvif" : 0.4.4 Adapter "openhab" : 1.1.0 Adapter "openligadb" : 1.1.0 Adapter "openweathermap": 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.4 Adapter "owntracks" : 0.6.3 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.0.7 Adapter "phantomjs" : 1.1.2 Adapter "pi-hole" : 1.3.1 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.3.0 Adapter "ping" : 1.4.12 Adapter "places" : 1.0.0 Adapter "plex" : 0.8.11 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.6 Adapter "proxmox" : 1.0.1 Adapter "proxy" : 1.2.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 2.0.3 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 1.0.9 Adapter "radiohead" : 1.0.7 Adapter "rflink" : 2.1.6 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.1.3 Adapter "robonect" : 0.1.3 Adapter "roomba" : 1.1.1 Adapter "rpi2" : 1.2.0 Adapter "s7" : 1.1.9 Adapter "samsung" : 0.2.9 Adapter "sayit" : 1.12.2 Adapter "sbfspot" : 4.0.2 Adapter "scenes" : 2.3.0 Adapter "schoolfree" : 0.7.0 Adapter "schwoerer-ventcube": 1.3.0 Adapter "shelly" : 4.0.3 Adapter "shuttercontrol": 1.0.4 Adapter "sia" : 1.0.4 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.4.8 Adapter "smappee" : 0.2.2 Adapter "smartcontrol" : 1.2.1 Adapter "smartgarden" : 1.0.1 Adapter "smartmeter" : 3.1.6 Adapter "snips" : 1.5.1 Adapter "snmp" : 0.5.0 Adapter "socketio" : 3.0.13 Adapter "solarlog" : 2.0.0 Adapter "solarviewdatareader": 0.2.1 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.7.0 Adapter "sonoff" : 2.3.3 Adapter "sonos" : 2.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.15.3 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 1.0.0 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.2 Adapter "stiebel-isg" : 1.5.1 Adapter "sunnyportal" : 0.1.5 Adapter "swiss-weather-api": 0.3.2 Adapter "synology" : 0.1.18 Adapter "systeminfo" : 0.3.1 Adapter "tahoma" : 0.3.2 Adapter "tankerkoenig" : 2.0.5 Adapter "telegram" : 1.6.0 Adapter "terminal" : 0.1.2 Adapter "tesla-motors" : 0.2.3 Adapter "text2command" : 2.0.5 Adapter "tinker" : 1.1.0 Adapter "tr-064" : 4.2.1 Adapter "tradfri" : 2.6.3 Adapter "trashschedule" : 1.0.3 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 3.4.1 Adapter "tvspielfilm" : 1.0.4 Adapter "unifi" : 0.5.8 Adapter "upnp" : 1.0.16 Adapter "vaillant" : 0.0.10 Adapter "valloxmv" : 1.1.1 Adapter "vcard" : 0.0.9 Adapter "velux" : 0.0.5 Adapter "viessmann" : 1.3.2 Adapter "virtualpowermeter": 1.2.1 Adapter "vis" : 1.3.4 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.2.0 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.7 Adapter "vis-icontwo" : 0.34.0 Adapter "vis-inventwo" : 2.5.11 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.2 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.4 Adapter "vis-material-advanced": 1.3.0 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.6 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 Adapter "vis-weather" : 2.5.2 Adapter "vr200" : 1.0.0 Adapter "vw-connect" : 0.0.15 Adapter "weatherunderground": 3.2.1 Adapter "web" : 3.0.14 Adapter "weishaupt-wem" : 0.0.8 Adapter "whatsapp-cmb" : 0.1.6 Adapter "wiffi-wz" : 2.2.0 Adapter "wifilight" : 1.1.0 Adapter "windows-control": 0.1.5 Adapter "wled" : 0.5.2 Adapter "wm-bus" : 0.1.12 Adapter "wolf" : 1.2.1 Adapter "worx" : 1.2.3 Adapter "xbox" : 0.6.8 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.11.0 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.3 Adapter "youtube" : 1.0.0 Adapter "yr" : 2.0.3 Adapter "zigbee" : 1.3.1 , installed 1.3.1 Adapter "zont" : 0.5.3 Adapter "zwave" : 2.0.1 Adapter "zwave2" : 1.7.10 pi@second-device:~ $ cd /opt/iobroker pi@second-device:/opt/iobroker $ npm i iobroker.zigbee@1.3.1 --force npm WARN using --force I sure hope you know what you are doing. npm WARN winston-syslog@2.4.4 requires a peer of winston@^3.0.0 but none is installed. You must install peer dependencies yourself. + iobroker.zigbee@1.3.1 updated 1 package in 23.789s 12 packages are looking for funding run `npm fund` for details pi@second-device:/opt/iobroker $ iobroker upload all upload [250] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tuya_rb280.png img/tuya_rb280.png image/png upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_gu10_color.png img/philips_hue_gu10_color.png image/png upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lumi_router.png img/lumi_router.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_recessed_spot_light.png img/ikea_recessed_spot_light.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_bulb_E27.png img/ikea_bulb_E27.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hive.png img/hive.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gira_4_buttons.png img/gira_4_buttons.png image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ewelink_DS01.png img/ewelink_DS01.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_neutral1.png img/ctrl_neutral1.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_902010_24.png img/bitron_902010_24.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZHS15.png img/ZHS15.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/NAS-AB02B0.png img/NAS-AB02B0.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Moes_Wall_Thermostat.png img/Moes_Wall_Thermostat.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/HY08WE.png img/HY08WE.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ_R8_8.png img/DIYRuZ_R8_8.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ_Geiger.png img/DIYRuZ_Geiger.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ_FreePad.png img/DIYRuZ_FreePad.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ_Flower.png img/DIYRuZ_Flower.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DGNWG05LM.png img/DGNWG05LM.png image/png upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Bitron_AV201021A.png img/Bitron_AV201021A.png image/png upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/BW-IS5.png img/BW-IS5.png image/png upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/BW-IS3.png img/BW-IS3.png image/png upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/AV2010_32.png img/AV2010_32.png image/png upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/adapter-settings.js adapter-settings.js application/javascript Update "system.adapter.zigbee.1" No alive host found which has the adapter web installed! No upload possible. Skipped. No alive host found which has the adapter tr-064 installed! No upload possible. Skipped. No alive host found which has the adapter text2command installed! No upload possible. Skipped. No alive host found which has the adapter terminal installed! No upload possible. Skipped. No alive host found which has the adapter telegram installed! No upload possible. Skipped. No alive host found which has the adapter sonoff installed! No upload possible. Skipped. No alive host found which has the adapter socketio installed! No upload possible. Skipped. No alive host found which has the adapter simple-api installed! No upload possible. Skipped. No alive host found which has the adapter scenes installed! No upload possible. Skipped. No alive host found which has the adapter samsung installed! No upload possible. Skipped. No alive host found which has the adapter mobile installed! No upload possible. Skipped. No alive host found which has the adapter mihome-vacuum installed! No upload possible. Skipped. No alive host found which has the adapter javascript installed! No upload possible. Skipped. No alive host found which has the adapter info installed! No upload possible. Skipped. No alive host found which has the adapter flot installed! No upload possible. Skipped. upload [6] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/words.js words.js application/javascript upload [5] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/translateTools.js translateTools.js application/javascript upload [4] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings_m.html settings_m.html text/html upload [3] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings.html settings.html text/html upload [2] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index_m.html index_m.html text/html upload [1] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index.html index.html text/html upload [0] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/discovery.png discovery.png image/png No alive host found which has the adapter digitalstrom installed! No upload possible. Skipped. upload [450] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/galeria2-Beaufort/75.png icons/viento-wind/galeria2-Beaufort/75.png image/png upload [400] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/galeria2-Beaufort/3.png icons/viento-wind/galeria2-Beaufort/3.png image/png upload [350] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/galeria1/16.png icons/viento-wind/galeria1/16.png image/png upload [300] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/Beaufort-White/60.png icons/viento-wind/Beaufort-White/60.png image/png upload [250] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/viento-wind/Beaufort-White/15.png icons/viento-wind/Beaufort-White/15.png image/png upload [200] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria6/11.svg icons/tiempo-weather/galeria6/11.svg image/svg+xml upload [150] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria5/PNG/White/9.png icons/tiempo-weather/galeria5/PNG/White/9.png image/png upload [100] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria4/3.png icons/tiempo-weather/galeria4/3.png image/png upload [90] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria4/11.png icons/tiempo-weather/galeria4/11.png image/png upload [80] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria3/2.png icons/tiempo-weather/galeria3/2.png image/png upload [70] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria3/10.png icons/tiempo-weather/galeria3/10.png image/png upload [60] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria2/19.png icons/tiempo-weather/galeria2/19.png image/png upload [50] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria2/1.png icons/tiempo-weather/galeria2/1.png image/png upload [40] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/tiempo-weather/galeria1/18.png icons/tiempo-weather/galeria1/18.png image/png upload [30] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/9.png icons/luna-moon/9.png image/png upload [20] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/26.png icons/luna-moon/26.png image/png upload [19] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/25.png icons/luna-moon/25.png image/png upload [18] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/24.png icons/luna-moon/24.png image/png upload [17] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/23.png icons/luna-moon/23.png image/png upload [16] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/22.png icons/luna-moon/22.png image/png upload [15] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/21.png icons/luna-moon/21.png image/png upload [14] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/20.png icons/luna-moon/20.png image/png upload [13] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/2.png icons/luna-moon/2.png image/png upload [12] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/19.png icons/luna-moon/19.png image/png upload [11] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/18.png icons/luna-moon/18.png image/png upload [10] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/17.png icons/luna-moon/17.png image/png upload [9] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/16.png icons/luna-moon/16.png image/png upload [8] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/15.png icons/luna-moon/15.png image/png upload [7] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/14.png icons/luna-moon/14.png image/png upload [6] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/13.png icons/luna-moon/13.png image/png upload [5] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/12.png icons/luna-moon/12.png image/png upload [4] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/11.png icons/luna-moon/11.png image/png upload [3] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/10.png icons/luna-moon/10.png image/png upload [2] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/1.png icons/luna-moon/1.png image/png upload [1] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/icons/luna-moon/0.png icons/luna-moon/0.png image/png upload [0] daswetter.admin /opt/iobroker/node_modules/iobroker.daswetter/admin/daswettercom.png daswettercom.png image/png No alive host found which has the adapter cloud installed! No upload possible. Skipped. upload [7] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/words.js words.js application/javascript upload [6] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/style.css style.css text/css upload [5] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/index_m.html index_m.html text/html upload [4] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/index.html index.html text/html upload [3] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/build/index.map build/index.map application/json upload [2] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/build/index.js.map build/index.js.map application/json upload [1] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/build/index.js build/index.js application/javascript upload [0] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/ble.png ble.png image/png upload [3] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/words.js words.js application/javascript upload [2] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index_m.html index_m.html text/html upload [1] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index.html index.html text/html upload [0] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/backitup.png backitup.png image/png No alive host found which has the adapter alexa2 installed! No upload possible. Skipped. upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/words.js words.js application/javascript upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index_m.html index_m.html text/html upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index.html index.html text/html upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png pi@second-device:/opt/iobroker $ iobroker start@Mapio90 sagte in Zigbee Adapter v1.2.1 immer Rot:
winston-syslog
Das sieht jetzt bezüglich zigbee gut aus. Aber mit winston klemmt da noch irgendwas.
cd /opt/iobroker npm list winston npm list winston-syslog -
@Mapio90 sagte in Zigbee Adapter v1.2.1 immer Rot:
winston-syslog
Das sieht jetzt bezüglich zigbee gut aus. Aber mit winston klemmt da noch irgendwas.
cd /opt/iobroker npm list winston npm list winston-syslog@Thomas-Braun sagte in Zigbee Adapter v1.2.1 immer Rot:
npm list winston-syslog
pi@second-device:/opt/iobroker $ cd /opt/iobroker pi@second-device:/opt/iobroker $ npm list winston iobroker.inst@2.0.2 /opt/iobroker ├─┬ iobroker.js-controller@3.1.6 │ ├─┬ prompt@1.0.0 │ │ └── winston@2.1.1 │ └── UNMET PEER DEPENDENCY winston@3.3.3 └── winston@2.4.4 extraneous npm ERR! extraneous: winston@2.4.4 /opt/iobroker/node_modules/winston npm ERR! peer dep missing: winston@^3.0.0, required by winston-syslog@2.4.4 pi@second-device:/opt/iobroker $ npm list winston-syslog iobroker.inst@2.0.2 /opt/iobroker └─┬ iobroker.js-controller@3.1.6 └── winston-syslog@2.4.4 -
@Thomas-Braun sagte in Zigbee Adapter v1.2.1 immer Rot:
npm list winston-syslog
pi@second-device:/opt/iobroker $ cd /opt/iobroker pi@second-device:/opt/iobroker $ npm list winston iobroker.inst@2.0.2 /opt/iobroker ├─┬ iobroker.js-controller@3.1.6 │ ├─┬ prompt@1.0.0 │ │ └── winston@2.1.1 │ └── UNMET PEER DEPENDENCY winston@3.3.3 └── winston@2.4.4 extraneous npm ERR! extraneous: winston@2.4.4 /opt/iobroker/node_modules/winston npm ERR! peer dep missing: winston@^3.0.0, required by winston-syslog@2.4.4 pi@second-device:/opt/iobroker $ npm list winston-syslog iobroker.inst@2.0.2 /opt/iobroker └─┬ iobroker.js-controller@3.1.6 └── winston-syslog@2.4.4@Mapio90
Da ist eine Version von winston auf dem System, die zu alt ist.Schaut bei mir so aus:
pi@raspberrypi:/opt/iobroker $ npm list winston iobroker.inst@2.0.3 /opt/iobroker └─┬ iobroker.js-controller@3.1.6 ├─┬ prompt@1.0.0 │ └── winston@2.1.1 ├─┬ winston-daily-rotate-file@4.5.0 │ └── winston@3.3.3 deduped ├─┬ winston-syslog@2.4.4 │ └── winston@3.3.3 deduped └── winston@3.3.3Backup am Start?
cd /opt/iobroker iobroker stop npm i winston@latest iobroker fix iobroker start
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden372
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge