Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Jona]

@Asgothian
Es scheint geholfen zu haben, den Stick in einen anderen USB Port zu stecken! Gibt es eine Erklärung dafür? Vorher war er zusammen (je Port ein Gerät) mit meiner externen Festplatte in einem der USB 3 Porst, nun alleine in einem der zwei USB 2 Ports.

[Asgothian]

@Jona Fein,

[Jona]

Leider muss ich den Thread wiederbeleben. Die Probleme sind weiterhin vorhanden. Zwar ist der Neustart jetzt kein Problem mehr, weil ich jetzt einen USB2 anstatt USB3 Port nutze, aber nachdem mal etwas läuft, kann man sich schon bald wieder auf diese Fehler einstellen.

2020-09-28 11:06:27.718 - error: zigbee.0 (1740) Error on send command to 0x00158d0002e34b33. Error: Error: Command 0x00158d0002e34b33/2 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null}) failed (SREQ '--> AF - dataRequest - {"dstaddr":13765,"destendpoint":2,"srcendpoint":1,"clusterid":6,"transid":49,"options":0,"radius":30,"len":3,"data":{"type":"Buffer","data":[1,24,0]}}' failed with status '(0x02: INVALID_PARAM)' (expected '(0x00: SUCCESS)'))
at Znp. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:291:27)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:24:58)
2020-09-28 11:06:30.480 - error: zigbee.0 (1740) Error on send command to 0x00158d0002e34b33. Error: Error: Command 0x00158d0002e34b33/2 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null}) failed (SREQ '--> AF - dataRequest - {"dstaddr":13765,"destendpoint":2,"srcendpoint":1,"clusterid":6,"transid":50,"options":0,"radius":30,"len":3,"data":{"type":"Buffer","data":[1,25,1]}}' failed with status '(0x02: INVALID_PARAM)' (expected '(0x00: SUCCESS)'))
at Znp. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:291:27)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:24:58)
2020-09-28 11:06:49.663 - error: zigbee.0 (1740) Error on send command to 0x00158d0002f8d5b4. Error: Error: Command 0x00158d0002f8d5b4/2 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null}) failed (SREQ '--> AF - dataRequest - {"dstaddr":5944,"destendpoint":2,"srcendpoint":1,"clusterid":6,"transid":51,"options":0,"radius":30,"len":3,"data":{"type":"Buffer","data":[1,26,0]}}' failed with status '(0x02: INVALID_PARAM)' (expected '(0x00: SUCCESS)'))
at Znp. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:291:27)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:24:58)
2020-09-28 11:06:59.248 - error: zigbee.0 (1740) Error on send command to 0x00158d0002f8d76c. Error: Error: Command 0x00158d0002f8d76c/2 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null}) failed (SREQ '--> AF - dataRequest - {"dstaddr":28411,"destendpoint":2,"srcendpoint":1,"clusterid":6,"transid":53,"options":0,"radius":30,"len":3,"data":{"type":"Buffer","data":[1,28,1]}}' failed with status '(0x02: INVALID_PARAM)' (expected '(0x00: SUCCESS)'))
at Znp. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:291:27)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:24:58)

Es ist wirklich wahnsinnig ärgerlich, da so nichts zuverlässig funktioniert. Meistens passiert nach einem Befehl nichts, manchmal wird der Befehl doch überraschend nach fünf bis zehn Sekunden ausgeführt. Ich habe viel in diesem Forum nach solchen Fehlern gesucht, aber nie einen Thread mit Lösung gefunden. Wenn ich etwas bei diesen tausenden Möglichkeiten übersehen haben sollte, gerne einfach einen Link zum Beitrag setzen. Ohne Hilfe komme ich hier aber nicht weiter.

[Thomas Braun]

@Jona

which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs

[Jona]

@Thomas-Braun

/usr/bin/nodejs
v10.21.0
/usr/local/bin/node
v12.13.0
/usr/local/bin/npm
6.14.2
nodejs:
  Installed: 10.21.0~dfsg-1~deb10u1+rpi1
  Candidate: 10.21.0~dfsg-1~deb10u1+rpi1
  Version table:
 *** 10.21.0~dfsg-1~deb10u1+rpi1 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages
        100 /var/lib/dpkg/status

[Thomas Braun]

@Jona
Node ist falsch installiert.
Korrigier es:

https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian/3

[Jona]

@Thomas-Braun Hab ich nun gemacht, bekomme über meine Quelle aber nur v10.

/usr/bin/nodejs
v10.21.0
/usr/bin/node
v10.21.0
/usr/bin/npm
5.8.0
nodejs:
  Installed: 10.21.0~dfsg-1~deb10u1+rpi1
  Candidate: 10.21.0~dfsg-1~deb10u1+rpi1
  Version table:
 *** 10.21.0~dfsg-1~deb10u1+rpi1 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages
        100 /var/lib/dpkg/status

[Thomas Braun]

@Jona
Dann leg die Quellen richtig an. Steht auch in der Anleitung. Im ersten Eintrag.

[Asgothian]

@Jona sagte in Probleme mit Zigbee / Generator.next / ZStackAdapter / 2252:

Ohne Hilfe komme ich hier aber nicht weiter.

Ich muss leider ein paar Fragen stellen bevor ich da richtig aktiv werden kann:

• Was fuer einen Koordinator (zigbee-Stick) setzt du ein - immer noch den cc2531 ?
• Wie viele Zigbee Geräte hat Dein Netz ?
• Welche Geräte sind betroffen ? Aus dem Log kann ich nur erkennen das es sich anscheinend um Geräte eines Herstellers handelt, nicht aber welche
• Reagieren die Geräte, sprich ist nur die Antwort nicht wie erwartet, oder reagieren die Geräte nicht (Das Log zeigt eindeutig Schaltversuche - da wird etwas an oder abgeschaltet)
• Sollte es sich bei den Geräten um Osram Steckdosen handeln bräuchte ich auch deren Firmware Version. Ich hatte mit meinen mit einer alten Firmware Probleme.

A.

[Jona]

@Thomas-Braun Nun ist das zwar so, wie Du es in deinem Blog-Post beschrieben hast, jetzt sind aber mein Zigbee und BLE Adapter dauerhaft auf rot. :/

/usr/bin/nodejs
v12.18.4
/usr/bin/node
v12.18.4
/usr/bin/npm
6.14.6
nodejs:
  Installed: 12.18.4-1nodesource1
  Candidate: 12.18.4-1nodesource1
  Version table:
 *** 12.18.4-1nodesource1 500
        500 https://deb.nodesource.com/node_12.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     10.21.0~dfsg-1~deb10u1+rpi1 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

2020-09-28 12:46:37.967 - info: host.raspberrypi Restart adapter system.adapter.zigbee.0 because enabled
2020-09-28 12:47:07.996 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 4776
2020-09-28 12:47:08.554 - error: host.raspberrypi Caught by controller[0]: /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:121
2020-09-28 12:47:08.554 - error: host.raspberrypi Caught by controller[0]: throw e;
2020-09-28 12:47:08.554 - error: host.raspberrypi Caught by controller[0]: ^
2020-09-28 12:47:08.554 - error: host.raspberrypi Caught by controller[0]: Error: libnode.so.64: cannot open shared object file: No such file or directory
2020-09-28 12:47:08.555 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1187:18)
2020-09-28 12:47:08.555 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:985:32)
2020-09-28 12:47:08.555 - error: host.raspberrypi Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:878:14)
2020-09-28 12:47:08.555 - error: host.raspberrypi Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1025:19)
2020-09-28 12:47:08.555 - error: host.raspberrypi Caught by controller[0]: at require (internal/modules/cjs/helpers.js:72:18)
2020-09-28 12:47:08.555 - error: host.raspberrypi Caught by controller[0]: at bindings (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:112:48)
2020-09-28 12:47:08.556 - error: host.raspberrypi Caught by controller[0]: at Object. (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/linux.js:2:36)
2020-09-28 12:47:08.556 - error: host.raspberrypi Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1137:30)
2020-09-28 12:47:08.556 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10)
2020-09-28 12:47:08.556 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:985:32)
2020-09-28 12:47:08.556 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)

[Thomas Braun]

@Jona

iobroker stop
iobroker fix
iobroker start

[Jona]

@Thomas-Braun Schon gemacht, keine Besserung.

[Jona]

@Asgothian

• Genau, ich nutze weiterhin den cc2531.

• Ich nutze derzeit 24 Geräte über Zigbee. Auch OSRAM Steckdosen sind betroffen!

• Wenn etwas nicht geht, sind alle betroffen (Lichtschalter, Lampen, Steckdosen, etc.)

• Die Geräte reagieren nicht. Ich kann nachvollziehen, dass der Befehl im Objekt geändert wird.

• Dazu (OSRAM Firmware) höre ich gerne deine Erfahrung!

[Thomas Braun]

@Jona

Error: libnode.so.64: cannot open shared object file: No such file or directory

Das ist eine 64bit-Library. Da ist bei dir noch irgendwas anderes krumm. Denn Raspbian OS ist eigentlich 32bit.

sudo apt remove node-*

apt policy libnode64

[Jona]

@Thomas-Braun Hierdurch ist leider mein gesamtes Smarthome lahm gelegt, weil Bluetooth Low Energy und Zigbee meine einzigen beiden Bindestellen nach außen sind. Hast Du eine Idee, wie ich das reparieren kann?

[Thomas Braun]

@Jona
Da scheint mir noch unnötiger Kram drauf zu sein.

sudo apt remove node-*
sudo apt remove libnode*

[Jona]

@Thomas-Braun Komischer Weise sucht er beim ersten noch nach Version 10.

~ $ sudo apt remove node-*
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package node-v10.16.0-linux-armv7l
E: Couldn't find any package by glob 'node-v10.16.0-linux-armv7l'
E: Couldn't find any package by regex 'node-v10.16.0-linux-armv7l'

~ $ sudo apt remove libnode*
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Note, selecting 'libnodeletlib-dev' for glob 'libnode*'
Note, selecting 'libnodeletlib1d' for glob 'libnode*'
Note, selecting 'libnodelet-topic-tools-dev' for glob 'libnode*'
Note, selecting 'libnodeletlib-tools' for glob 'libnode*'
Note, selecting 'libnode64-dev' for glob 'libnode*'
Note, selecting 'libnode-dev' for glob 'libnode*'
Note, selecting 'libnode64' for glob 'libnode*'
Note, selecting 'libnodelet-dev' for glob 'libnode*'
Package 'libnode64-dev' is not installed, so not removed
Package 'libnode-dev' is not installed, so not removed
Package 'libnode64' is not installed, so not removed
Package 'libnodelet-dev' is not installed, so not removed
Package 'libnodelet-topic-tools-dev' is not installed, so not removed
Package 'libnodeletlib-dev' is not installed, so not removed
Package 'libnodeletlib-tools' is not installed, so not removed
Package 'libnodeletlib1d' is not installed, so not removed
The following packages were automatically installed and are no longer required:
  gyp libc-ares2 libgfortran3 libgmime-2.6-0 libjs-inherits
  libjs-is-typedarray libllvm8 libmicrodns0 libncurses5 libuv1 libuv1-dev
  libva-wayland2 node-abbrev node-ajv node-ansi node-ansi-align
  node-ansi-regex node-ansi-styles node-ansistyles node-aproba node-archy
  node-are-we-there-yet node-asn1 node-assert-plus node-asynckit
  node-aws-sign2 node-aws4 node-balanced-match node-bcrypt-pbkdf node-bluebird
  node-boxen node-brace-expansion node-builtin-modules node-builtins
  node-cacache node-call-limit node-camelcase node-caseless node-chalk
  node-chownr node-cli-boxes node-cliui node-clone node-co node-color-convert
  node-color-name node-combined-stream node-concat-map node-concat-stream
  node-config-chain node-console-control-strings node-copy-concurrently
  node-core-util-is node-cross-spawn node-cyclist node-dashdash
  node-decamelize node-decompress-response node-deep-extend node-defaults
  node-delayed-stream node-delegates node-detect-indent node-detect-newline
  node-duplexer3 node-duplexify node-ecc-jsbn node-editor node-encoding
  node-end-of-stream node-errno node-escape-string-regexp node-execa
  node-extend node-extsprintf node-find-up node-flush-write-stream
  node-forever-agent node-form-data node-from2 node-fs-vacuum
  node-fs-write-stream-atomic node-fs.realpath node-gauge node-get-caller-file
  node-get-stream node-getpass node-glob node-got node-graceful-fs
  node-har-schema node-har-validator node-has-flag node-has-symbol-support-x
  node-has-to-string-tag-x node-has-unicode node-hosted-git-info
  node-http-signature node-iconv-lite node-iferr node-import-lazy
  node-imurmurhash node-inflight node-inherits node-ini node-invert-kv
  node-is-builtin-module node-is-npm node-is-object node-is-plain-obj
  node-is-retry-allowed node-is-stream node-is-typedarray node-isarray
  node-isexe node-isstream node-isurl node-jsbn node-json-parse-better-errors
  node-json-schema node-json-stable-stringify node-json-stringify-safe
  node-jsonify node-jsonparse node-jsonstream node-jsprim node-latest-version
  node-lazy-property node-lcid node-libnpx node-locate-path node-lockfile
  node-lowercase-keys node-lru-cache node-mem node-mime-types node-mimic-fn
  node-mimic-response node-minimatch node-minimist node-mississippi
  node-mkdirp node-move-concurrently node-mute-stream node-node-uuid node-nopt
  node-normalize-package-data node-npm-package-arg node-npm-run-path
  node-npmlog node-oauth-sign node-object-assign node-once node-opener
  node-os-locale node-osenv node-p-cancelable node-p-finally node-p-limit
  node-p-locate node-p-timeout node-package-json node-parallel-transform
  node-path-exists node-path-is-absolute node-path-is-inside
  node-performance-now node-prepend-http node-process-nextick-args
  node-promise-inflight node-promzard node-proto-list node-prr node-pump
  node-pumpify node-punycode node-qs node-qw node-rc node-read
  node-read-package-json node-readable-stream node-registry-auth-token
  node-registry-url node-request node-require-directory
  node-require-main-filename node-resolve-from node-retry node-rimraf
  node-run-queue node-safe-buffer node-semver node-semver-diff
  node-set-blocking node-sha node-shebang-command node-shebang-regex
  node-signal-exit node-slash node-slide node-sorted-object node-spdx-correct
  node-spdx-expression-parse node-spdx-license-ids node-sshpk node-ssri
  node-stream-each node-stream-iterate node-stream-shift node-string-decoder
  node-string-width node-strip-ansi node-strip-eof node-strip-json-comments
  node-supports-color node-tar node-term-size node-text-table node-through
  node-through2 node-timed-out node-tough-cookie node-tunnel-agent
  node-tweetnacl node-typedarray node-uid-number node-unique-filename
  node-unpipe node-url-parse-lax node-url-to-options node-util-deprecate
  node-uuid node-validate-npm-package-license node-validate-npm-package-name
  node-verror node-wcwidth.js node-which node-which-module node-wide-align
  node-widest-line node-wrap-ansi node-wrappy node-write-file-atomic
  node-xdg-basedir node-xtend node-y18n node-yallist node-yargs
  node-yargs-parser nodejs-doc rpi-eeprom-images
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

[Thomas Braun]

@Jona
Das ist alles alter Kram.

sudo apt autoremove
sudo reboot

Dann würde ich nodejs noch mal drüber bügeln:

iobroker stop
sudo apt install nodejs --reinstall
iobroker start

[Jona]

@Thomas-Braun Zwischendurch erst einmal danke für deine Mühe und Hilfe.
Leider sind die beiden Adapter noch immer auf rot.
Der Fehler-Log sieht so aus:

2020-09-28 13:21:00.300 - info: host.raspberrypi Restart adapter system.adapter.zigbee.0 because enabled
2020-09-28 13:21:30.328 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 2930
2020-09-28 13:21:30.954 - error: host.raspberrypi Caught by controller[0]: /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:121
2020-09-28 13:21:30.954 - error: host.raspberrypi Caught by controller[0]: throw e;
2020-09-28 13:21:30.955 - error: host.raspberrypi Caught by controller[0]: ^
2020-09-28 13:21:30.955 - error: host.raspberrypi Caught by controller[0]: Error: libnode.so.64: cannot open shared object file: No such file or directory
2020-09-28 13:21:30.955 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1187:18)
2020-09-28 13:21:30.955 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:985:32)
2020-09-28 13:21:30.955 - error: host.raspberrypi Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:878:14)
2020-09-28 13:21:30.956 - error: host.raspberrypi Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1025:19)
2020-09-28 13:21:30.956 - error: host.raspberrypi Caught by controller[0]: at require (internal/modules/cjs/helpers.js:72:18)
2020-09-28 13:21:30.956 - error: host.raspberrypi Caught by controller[0]: at bindings (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:112:48)
2020-09-28 13:21:30.956 - error: host.raspberrypi Caught by controller[0]: at Object. (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/linux.js:2:36)
2020-09-28 13:21:30.956 - error: host.raspberrypi Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1137:30)
2020-09-28 13:21:30.957 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10)
2020-09-28 13:21:30.957 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:985:32)
2020-09-28 13:21:30.957 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)

[Thomas Braun]

@Jona

sudo apt update
sudo apt upgrade

apt policy node-*

Gut möglich, dass man dann noch einen npm rebuild hinterherwerfen muss, wenn die Pakete sauber sind.