Fehler bei der Installation von ioBroker
-
Doch hab ich immer gemacht, hab sogar neu gestartet. Aber immer wieder ist dieser Fehler bei der Installation.
Installing ioBroker (3/4) ========================================================================== npm ERR! Unexpected end of JSON input while parsing near '...\r\n\r\nwsFcBAEBCAAQB' npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-05-29T11_57_48_860Z-debug.logund trotz dessen er schreibt
ioBroker was installed successfully Open http://192.168.1.1:8081 in a browser and start configuring!gibt es immer das Problem
pi@iobroker:~ $ iobroker status internal/modules/cjs/loader.js:638 throw err; ^ Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15) at Function.Module._load (internal/modules/cjs/loader.js:562:25) at Function.Module.runMain (internal/modules/cjs/loader.js:831:12) at startup (internal/bootstrap/node.js:283:19) at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3) -
@Kruech sagte in Fehler bei der Installation von ioBroker:
hab sogar neu gestartet. Aber immer wieder ist dieser Fehler bei der Installation.
du sollst dich NACH der Installation neu anmelden bevor du deinen Befehl eingibst
-
Wie gesagt das hatte ich immer so gemacht. Hab das ganze gerade noch einmal von Vorne gemacht und wieder.
pi@iobroker:~ $ curl -sL https://iobroker.net/install.sh | bash - library: loaded Library version=2020-04-12 ========================================================================== Welcome to the ioBroker installer! Installer version: 2020-04-12 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://archive.raspberrypi.org/debian buster InRelease OK:3 https://deb.nodesource.com/node_10.x buster InRelease Paketlisten werden gelesen... Fertig Changing npm registry to https://registry.npmjs.org Installed gcc-c++ ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== npm ERR! Unexpected end of JSON input while parsing near '...\r\n\r\nwsFcBAEBCAAQB' npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-05-29T12_20_07_476Z-debug.log ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Autostart enabled! Fixing directory permissions... ========================================================================== ioBroker was installed successfully Open http://10.70.90.101:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console! pi@iobroker:~ $ exit Abgemeldet ──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── Session stopped - Press <return> to exit tab - Press R to restart session - Press S to save terminal output to file login as: pi Last login: Fri May 29 14:25:06 2020 from 192.168.1.2 pi@iobroker:~ $ iobroker status internal/modules/cjs/loader.js:638 throw err; ^ Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15) at Function.Module._load (internal/modules/cjs/loader.js:562:25) at Function.Module.runMain (internal/modules/cjs/loader.js:831:12) at startup (internal/bootstrap/node.js:283:19) at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3) -
@Kruech sagte in Fehler bei der Installation von ioBroker:
Hab das ganze gerade noch einmal von Vorne gemacht
ich glaube nur was ich sehe
hier geht es schon los:
@Kruech sagte in Fehler bei der Installation von ioBroker:npm ERR! Unexpected end of JSON input while parsing near '...\r\n\r\nwsFcBAEBCAAQB'
Da ist irgendetwas mit dem Download schief gegangen.
-
@Homoran sagte in Fehler bei der Installation von ioBroker:
Da ist irgendetwas mit dem Download schief gegangen.
Ich sehe diese Fehler in den letzten Tagen häufiger. Auch bei aktualisierten Adaptern.
npm cache löschen und nochmal installieren hilft dann ggf.
Ist da auf dem Server mit den Repos vielleicht auch irgendwas krumm? -
@Thomas-Braun sagte in Fehler bei der Installation von ioBroker:
npm cache löschen und nochmal installieren hilft dann ggf.
bei npm basierten Infos sicher, da dann neu geladen wird.
wie das bei einem curl aussieht habe ich leider keine Ahnung, ob man da ein --force oder sonst etwas noch hinzufügen kann, damit es neu heruntergeladen wird -
hmm also den cache löschen geht hier wohl auch nicht so einfach.
pi@iobroker:/ $ npm cache clean npm ERR! As of npm@5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid. If you want to make sure everything is consistent, use 'npm cache verify' instead. On the other hand, if you're debugging an issue with the installer, you can use `npm install --cache /tmp/empty-cache` to use a temporary cache instead of nuking the actual one. npm ERR! npm ERR! If you're sure you want to delete the entire cache, rerun this command with --force. npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-05-29T13_05_53_645Z-debug.log -
@Kruech das muss mit --force gemacht werden
-
Ich hab jetzt mal in log geschaut welche bei der Installation vom iobroker am Ende steht.
Da sind einige von diesen Fehlern drinnen. hier nur ein Auszug823 http fetch GET 200 https://registry.npmjs.org/callsite 427ms 824 http fetch GET 200 https://registry.npmjs.org/async-limiter/-/async-limiter-1.0.1.tgz 340ms 825 silly pacote range manifest for async-limiter@~1.0.0 fetched in 435ms 826 http fetch GET 200 https://registry.npmjs.org/ms/-/ms-2.1.1.tgz 564ms 827 silly pacote version manifest for ms@2.1.1 fetched in 1079ms 828 http fetch GET 200 https://registry.npmjs.org/callsite/-/callsite-1.0.0.tgz 3851ms 829 silly pacote version manifest for callsite@1.0.0 fetched in 4290ms 830 http fetch GET 200 https://registry.npmjs.org/@types%2fnode 6071ms 831 http fetch GET 200 https://registry.npmjs.org/@types/node/-/node-14.0.5.tgz 827ms 832 silly pacote range manifest for @types/node@* fetched in 6960ms 833 silly fetchPackageMetaData error for express-fileupload@^1.1.6 Response timeout while trying to fetch https://registry.npmjs.org/express-fileupload (over 30000ms) 834 silly fetchPackageMetaData error for express-session@^1.17.1 Response timeout while trying to fetch https://registry.npmjs.org/express-session (over 30000ms) 835 http fetch GET 200 https://registry.npmjs.org/express-fileupload 33471ms 836 http fetch GET 200 https://registry.npmjs.org/express-session 33747ms 837 http fetch GET 200 https://registry.npmjs.org/cookie 30589ms 838 http fetch GET 200 https://registry.npmjs.org/cookie/-/cookie-0.4.0.tgz 109ms 839 silly pacote version manifest for cookie@0.4.0 fetched in 30709ms 840 http fetch GET 200 https://registry.npmjs.org/depd/-/depd-1.1.2.tgz 32975ms 841 silly pacote range manifest for depd@~1.1.2 fetched in 35435ms 842 http fetch GET 200 https://registry.npmjs.org/proxy-addr 17746ms 843 http fetch GET 200 https://registry.npmjs.org/proxy-addr/-/proxy-addr-2.0.6.tgz 129ms 844 silly pacote range manifest for proxy-addr@~2.0.5 fetched in 17890ms 845 http fetch GET 200 https://registry.npmjs.org/forwarded 84ms 846 http fetch GET 200 https://registry.npmjs.org/forwarded/-/forwarded-0.1.2.tgz 80ms 847 silly pacote range manifest for forwarded@~0.1.2 fetched in 176ms 848 http fetch GET 200 https://registry.npmjs.org/ipaddr.js 209ms 849 http fetch GET 200 https://registry.npmjs.org/ipaddr.js/-/ipaddr.js-1.9.1.tgz 123ms 850 silly pacote version manifest for ipaddr.js@1.9.1 fetched in 344ms 851 silly pacote tag manifest for iobroker.admin@stable fetched in 20ms 852 silly resolveWithNewModule iobroker.admin@4.0.10 checking installable status 853 silly pacote tag manifest for iobroker.js-controller@stable fetched in 22ms 854 silly resolveWithNewModule iobroker.js-controller@2.2.9 checking installable status 855 http fetch GET 304 https://registry.npmjs.org/iobroker.discovery 110ms (from cache) 856 silly fetchPackageMetaData error for iobroker.discovery@stable Unexpected end of JSON input while parsing near '...all":"https://registr' 857 http fetch GET 304 https://registry.npmjs.org/iobroker.info 112ms (from cache) 858 silly fetchPackageMetaData error for iobroker.info@stable Unexpected end of JSON input while parsing near '...a\nlnA+mVwSqD72a1Wh5l' 859 timing stage:rollbackFailedOptional Completed in 0ms 860 timing stage:runTopLevelLifecycles Completed in 223076ms -
@Kruech sagte in Fehler bei der Installation von ioBroker:
So oft wie ich in den letzten Tagen korrupte json Files gesehen habe vermute ich, dass es irgendwo auf npmjs.org klemmt.
[Edit:] BINGO!
https://status.npmjs.org/Monitoring - We began investigating an issue with the npmjs.com website a short time ago, quickly identified the issue and we are monitoring a fix we have deployed.
May 29, 06:10 UTC -
Alles klar, dann vielen Dank erstmal, dann bin ich beruhigt das es nicht an mir liegt und dann hilft wohl nur Tee trinken.
-
So trotz das bei https://status.npmjs.org/ wieder alles grün ist habe ich immer noch die gleichen Probleme. Hat jemand ne weitere Idee?
-
@Kruech
Zuerst musst du mal schauen, ob node sauber installiert ist:which nodejs && nodejs -v && which node && node -v && which npm && npm -vDann als user, der auch die Installation durchführt:
npm cache clean --forceUnd dann nochmal den Installer anhauen.
curl -sL https://iobroker.net/install.sh | bash - -
pi@raspberrypi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v /usr/bin/nodejs v10.20.1 /usr/bin/node v10.20.1 /usr/bin/npm 6.14.4Cache clean und neu installiert habe ich auch schon probiert. Trotzdem immer
library: loaded Library version=2020-04-12 ========================================================================== Welcome to the ioBroker installer! Installer version: 2020-04-12 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== OK:1 http://archive.raspberrypi.org/debian buster InRelease OK:2 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:3 https://deb.nodesource.com/node_10.x buster InRelease Paketlisten werden gelesen... Fertig Changing npm registry to https://registry.npmjs.org Installed gcc-c++ ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== npm ERR! Unexpected end of JSON input while parsing near '...sk":"^1.0.6","@iobrok' npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-06-02T18_53_21_120Z-debug.log ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Autostart enabled! Fixing directory permissions... ========================================================================== -
in der log-Datei von der IoBroker installation hab ich immer paar mal nen timeout.
1051 silly fetchPackageMetaData error for engine.io@~3.4.0 Response timeout while trying to fetch https://registry.npmjs.org/engine.io (over 30000ms)es sind aber nicht immer die gleichen Pakete.
-
@Kruech sagte in Fehler bei der Installation von ioBroker:
1051 silly fetchPackageMetaData error for engine.io@~3.4.0 Response timeout while trying to fetch https://registry.npmjs.org/engine.io (over 30000ms)
npm install npm@latest -g -
Ich geh kaputt. jetzt hat das wenigstens schon mal soweit geklappt des der IoBroker installiert wurde und ich per Browser drauf komme.
Es sind sehr viele "warnings" bei der Installation aufgelaufen.
========================================================================== Installing ioBroker (3/4) ========================================================================== In file included from ../src/main.cpp:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../../nan/nan.h:56, from ../src/main.cpp:3: ../src/main.cpp: At global scope: /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(diskusage, Init) ^~~~~~~~~~~ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/main.cpp:3: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../src/unix_dgram.cc:5: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../../nan/nan.h:56, from ../src/unix_dgram.cc:5: ../src/unix_dgram.cc: At global scope: /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/unix_dgram.cc:5: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} -Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} -Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../../nan/nan.h:56, from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../src/poller.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} -Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../../nan/nan.h:56, from ../src/poller.cpp:1: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] ========================================================================== -
rm -rf /home/pi/.cache/*Und dann würde ich dir eigentlich auch Version 12 von node empfehlen.
Zu guter Letzt wirf noch ein
iobroker stop iobroker fixhinterher.
-
Vielen Dank für die Hilfe. Dann werde ich jetzt den ganzen Pi nochmal aufsetzten mit Version 12 damit das sauberer ist als wie jetzt. Ich weis gar nicht mehr was ich jetzt alles rumprobiert habe.
-
@Kruech
Wenn es ansonsten läuft...
Aber wie du meinst.
Der springende Punkt ist bei dir aus irgendwelchen Gründen die Version von npm.
Die musst du vor der Installation des ioBrokers (und nach der Installation von nodejs) auf >=6.14.5 bringen.
