Welcher Zigbee Adapter ist der aktuellste? Fehler... cc2531
-
@leonracer sagte in Welcher Zigbee Adapter ist der aktuellste? Fehler... cc2531:
Wird dein Stick erkannt? Geh mal ins Terminal und gib ein:
ls -la /dev/serial/by-id
Und schau ob dein Adapter aufgeführt ist.
Dann gib den Pfad mit:
/dev/serial/by-id/[hier der Adaptername]
Und Probier nochmals.
Leinracer
ja hatte ich bereits schon gemacht und auch in der Mail oben gehabt.
Die Version /dev/serial/by-id/[hier der Adaptername]
das selbe Ergebniss Der Adapter bleibt ROT -
@Glasfaser sagte in Welcher Zigbee Adapter ist der aktuellste? Fehler... cc2531:
host.rock64 2020-04-22 16:22:40.375 error Caught by controller[0]: code: 'MODULE_NOT_FOUND', .. host.rock64 2020-04-22 16:22:40.366 error Caught by controller[0]: Error: Cannot find module 'mixin-deep'Hast du ein Update an deinem System in der letzten Zeit gemacht , da du latest hast
Dort fehlt ein Paket .Der Zigbee Adapter hat kein Fehler in dieser Version 1.1.1 .!
Komplett neu aufgesetzt und neu installiert.
Welches Paket soll den Fehlen? -
Das steht doch da:
Error: Cannot find module 'mixin-deep'Es fehlt also das Modul "Mixin-deep".
A.
-
npm install mixin-deep
hat geholfen danke
-
Hi zusammen,
ich habe gerade ein Zigbee Adapter Update von 0.11.5 auf 1.1.1 gemacht, die Instanz ist auch soweit "grün" also startet aber ich sehe keine Geräte mehr, wenn ich den Adapter neustarte sehe ich im Log auch die ganzen Geräte nur sie werden eben nicht mehr angezeigt. Dauert es bis die Geräte wieder sauber angezeigt werden oder hab ich was falsch gemacht bzw. was kann ich tun (außer den Adapter wieder auf die v0.11.5 zu downgraden) ?
Danke.
-
@hannoi
Ein paar Fragen:- sind die Objekte im Objektbaum noch da ?
- wenn du im Objektbaum eine Lampe z.Bsp einschaltest, geht sie dann an ?
- kommen die Werte von den Sensoren im ioBroker an ?
A.
-
@hannoi sagte in Welcher Zigbee Adapter ist der aktuellste? Fehler... cc2531:
von 0.11.5 auf 1.1.1
ich glaube der Sprung ist zu groß. irgendwo im Forum ist es beschrieben wie man von Shepard auf Herdsman umsteigt.
Ich würde einfach Adapter und Coordinator neue einrichten. -
@Asgothian es ist alles zu sehen in den Objekten, wenn ich per Telegram o.ä. was ansteuer funktioniert es. Sieht eher aus wie die Anzeige in der Instanz selber, hab leider kein neues Zigbee Gerät welches noch nicht angelernt war um das Neuanlernen zu testen..
-
Soeben nach dem Nodejs Update auf v12.16.3 startet mein Zigbee Adapter gar nicht mehr, im Log bekomme ich folgende Meldung:
2020-05-12 20:53:41.105 info Restart adapter system.adapter.zigbee.0 because enabled 2020-05-12 20:53:41.105 error instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2020-05-12 20:53:41.104 error Caught by controller[0]: } 2020-05-12 20:53:41.104 error Caught by controller[0]: ] 2020-05-12 20:53:41.103 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/compiled/12.16.3/linux/arm/serialport.node' 2020-05-12 20:53:41.102 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/default/serialport.node', 2020-05-12 20:53:41.102 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/Release/serialport.node', 2020-05-12 20:53:41.101 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/out/Release/serialport.node', 2020-05-12 20:53:41.100 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/Debug/serialport.node', 2020-05-12 20:53:41.100 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/out/Debug/serialport.node', 2020-05-12 20:53:41.099 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/Release/serialport.node', 2020-05-12 20:53:41.099 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/Debug/serialport.node', 2020-05-12 20:53:41.098 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/serialport.node', 2020-05-12 20:53:41.097 error Caught by controller[0]: tries: [ 2020-05-12 20:53:41.097 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1133:30) { 2020-05-12 20:53:41.096 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/cc-znp/node_modules/serialport/lib/bindings/auto-detect.js:16:22) 2020-05-12 20:53:41.096 error Caught by controller[0]: at require (internal/modules/cjs/helpers.js:77:18) 2020-05-12 20:53:41.095 error Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1019:19) 2020-05-12 20:53:41.094 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:877:14) 2020-05-12 20:53:41.094 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-12 20:53:41.093 error Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1153:10) 2020-05-12 20:53:41.093 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1133:30) 2020-05-12 20:53:41.092 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/cc-znp/node_modules/serialport/lib/bindings/linux.js:2:36) 2020-05-12 20:53:41.092 error Caught by controller[0]: at bindings (/opt/iobroker/node_modules/cc-znp/node_modules/bindings/bindings.js:93:9) 2020-05-12 20:53:41.091 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/compiled/12.16.3/linux/arm/serialport.node 2020-05-12 20:53:41.090 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/default/serialport.node 2020-05-12 20:53:41.090 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/Release/serialport.node 2020-05-12 20:53:41.089 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/out/Release/serialport.node 2020-05-12 20:53:41.089 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/Debug/serialport.node 2020-05-12 20:53:41.088 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/out/Debug/serialport.node 2020-05-12 20:53:41.087 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/Release/serialport.node 2020-05-12 20:53:41.087 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/Debug/serialport.node 2020-05-12 20:53:41.086 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/serialport.node 2020-05-12 20:53:41.086 error Caught by controller[0]: Error: Could not locate the bindings file. Tried: 2020-05-12 20:53:41.085 error Caught by controller[0]: ^ 2020-05-12 20:53:41.076 error Caught by controller[0]: throw err 2020-05-12 20:53:41.075 error Caught by controller[0]: /opt/iobroker/node_modules/cc-znp/node_modules/bindings/bindings.js:96 2020-05-12 20:53:38.816 info instance system.adapter.zigbee.0 started with pid 3677 2020-05-12 20:53:08.791 info Restart adapter system.adapter.zigbee.0 because enabled 2020-05-12 20:53:08.790 error instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2020-05-12 20:53:08.789 error Caught by controller[0]: } 2020-05-12 20:53:08.789 error Caught by controller[0]: ] 2020-05-12 20:53:08.788 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/compiled/12.16.3/linux/arm/serialport.node' 2020-05-12 20:53:08.787 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/default/serialport.node', 2020-05-12 20:53:08.787 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/Release/serialport.node', 2020-05-12 20:53:08.786 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/out/Release/serialport.node', 2020-05-12 20:53:08.786 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/Debug/serialport.node', 2020-05-12 20:53:08.785 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/out/Debug/serialport.node', 2020-05-12 20:53:08.784 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/Release/serialport.node', 2020-05-12 20:53:08.784 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/Debug/serialport.node', 2020-05-12 20:53:08.783 error Caught by controller[0]: '/opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/serialport.node', 2020-05-12 20:53:08.783 error Caught by controller[0]: tries: [ 2020-05-12 20:53:08.782 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1133:30) { 2020-05-12 20:53:08.782 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/cc-znp/node_modules/serialport/lib/bindings/auto-detect.js:16:22) 2020-05-12 20:53:08.781 error Caught by controller[0]: at require (internal/modules/cjs/helpers.js:77:18) 2020-05-12 20:53:08.780 error Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1019:19) 2020-05-12 20:53:08.780 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:877:14) 2020-05-12 20:53:08.779 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:977:32) 2020-05-12 20:53:08.778 error Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1153:10) 2020-05-12 20:53:08.777 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1133:30) 2020-05-12 20:53:08.777 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/cc-znp/node_modules/serialport/lib/bindings/linux.js:2:36) 2020-05-12 20:53:08.776 error Caught by controller[0]: at bindings (/opt/iobroker/node_modules/cc-znp/node_modules/bindings/bindings.js:93:9) 2020-05-12 20:53:08.775 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/compiled/12.16.3/linux/arm/serialport.node 2020-05-12 20:53:08.775 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/default/serialport.node 2020-05-12 20:53:08.774 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/Release/serialport.node 2020-05-12 20:53:08.774 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/out/Release/serialport.node 2020-05-12 20:53:08.773 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/Debug/serialport.node 2020-05-12 20:53:08.773 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/out/Debug/serialport.node 2020-05-12 20:53:08.772 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/Release/serialport.node 2020-05-12 20:53:08.771 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/Debug/serialport.node 2020-05-12 20:53:08.771 error Caught by controller[0]: → /opt/iobroker/node_modules/cc-znp/node_modules/serialport/build/serialport.node 2020-05-12 20:53:08.770 error Caught by controller[0]: Error: Could not locate the bindings file. Tried: 2020-05-12 20:53:08.769 error Caught by controller[0]: ^ 2020-05-12 20:53:08.769 error Caught by controller[0]: throw err 2020-05-12 20:53:08.767 error Caught by controller[0]: /opt/iobroker/node_modules/cc-znp/node_modules/bindings/bindings.js:96Ein npm rebuild hatte ich durchgeführt.
JS controller 3.1.4
Wer eine Idee ?
-
@hannoi
Mehr Info wäre nicht schlecht.
Dein Serialport ist besetzt oder nicht richtig konfiguriert oder weitergeleitet.
Starte mal das ganze System neue. -
@dimaiv
Sry dachte evtl. kann man aus den Fehlern schon etwas rauslesen. Also ich hab auf dem multihost slave den Zigbee CC2531 Adapter, welcher auch bis zu dem Update ohne Probleme lief.Ich hab den Fixer jetzt noch mal laufen lassen und danach auf dem slave noch mal das pm rebuild, da kommt folgendes:
root@: /opt/iobroker# npm rebuild > iobroker@2.0.3 install /opt/iobroker/node_modules/iobroker > node lib/checkVersions.js NPM version: 6.14.4 > iobroker@2.0.3 postinstall /opt/iobroker/node_modules/iobroker > node lib/install.js lib/install.js is not being run as part of an installation - skipping... > serialport@6.2.2 install /opt/iobroker/node_modules/iobroker.discovery/node_modules/serialport > prebuild-install || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=12.16.3 runtime=node arch=arm platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/iobroker.discovery/node_modules/serialport/build“ wird betreten CXX(target) Release/obj.target/serialport/src/serialport.o ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:41:48: error: no matching function for call to ‘v8::Value::ToString()’ v8::String::Utf8Value path(info[0]->ToString()); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67:0, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2668:44: note: candidate: v8::MaybeLocal<v8::String> v8::Value::ToString(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<String> ToString( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2668:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2684:31: note: candidate: v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const Local<String> ToString(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2684:31: note: candidate expects 1 argument, 0 provided Local<String> ToString(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:48:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67:0, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterOpen(uv_work_t*)’: ../src/serialport.cpp:95:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:113:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67:0, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterUpdate(uv_work_t*)’: ../src/serialport.cpp:150:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterClose(uv_work_t*)’: ../src/serialport.cpp:188:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterFlush(uv_work_t*)’: ../src/serialport.cpp:231:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:250:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67:0, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterSet(uv_work_t*)’: ../src/serialport.cpp:285:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’: ../src/serialport.cpp:329:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:330:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:331:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:336:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’: ../src/serialport.cpp:378:106: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../nan/nan.h:53, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’: ../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6:0, from ../src/serialport.cpp:1: ../../nan/nan.h:1674:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:460:17: error: variable or field ‘init’ declared void void init(v8::Handle<v8::Object> target) { ^~~~~~ ../src/serialport.cpp:460:13: error: ‘Handle’ is not a member of ‘v8’ void init(v8::Handle<v8::Object> target) { ^~ ../src/serialport.cpp:460:34: error: expected primary-expression before ‘>’ token void init(v8::Handle<v8::Object> target) { ^ ../src/serialport.cpp:460:36: error: ‘target’ was not declared in this scope void init(v8::Handle<v8::Object> target) { ^~~~~~ In file included from ../../nan/nan.h:53:0, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../src/serialport.cpp:485:25: error: ‘init’ was not declared in this scope NODE_MODULE(serialport, init); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ serialport.target.mk:112: die Regel für Ziel „Release/obj.target/serialport/src/serialport.o“ scheiterte make: *** [Release/obj.target/serialport/src/serialport.o] Fehler 1 make: Verzeichnis „/opt/iobroker/node_modules/iobroker.discovery/node_modules/serialport/build“ wird verlassen gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.19.66-v7+ gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/iobroker.discovery/node_modules/serialport gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! serialport@6.2.2 install: `prebuild-install || node-gyp rebuild` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the serialport@6.2.2 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above.Den Slave hab ich jetzt schon einige Male durchgestartet, Zigbee Adapter Version ist die 1.1.1.
Sollte ich den Master auch noch mal durchstarten? Dort läuft bis auf den Zigbee Adapater alles soweit. -
@hannoi
Ist dein Slave komplett aktuel? Inklusive js-controller? -
Korrekt, beide auf JS-controller 3.1.4 und Nodejs auf v12.16.3.
-
Nach einem
npm install bindings und danach einem: npm rebuild --unsafe-permwurde Adapter wieder grün und ist wieder erreichbar!
