NEWS
Update js-controller und node.js
ioBroker Allgemein
93
Beiträge
10
Kommentatoren
65.4k
Aufrufe
10
Watching
-
@Thomas-Braun Also Sackgasse? Das war aber die letztes Jahr empfohlene Disribution für den Raspi und Iobroker. Da können die doch einen nicht hängen lassen, noch dazu weil andere wohl auch das Problem haben nach dem Update von node und js-controller.
Welche Alternativen gibts? Will evtl. auf einen Raspi 4 umsteigen und da muß ich ja eh allse neu aufsetzen.
VG klausiob@Homoran Ist es notwendig das rasbian stretch auf buster upzugraden, um die Fehler, die auch andere haben Fehlermeldung bei manuelles Update / Adapter zu vermeiden? Leider hat die Lösung gelöst - Was bedeudet diese Fehlermeldung? nicht funktioniert.
-
@klausiob Du brauchst ein aktuelles libvips bzw. libvips-dev
Ich fürchte nur, das baut keiner für Stretch.@Thomas-Braun sagte in Update js-controller und node.js:
@klausiob Du brauchst ein aktuelles libvips bzw. libvips-dev
Ich fürchte nur, das baut keiner für Stretch.Hallöchen,
ich häng mich hier mal mit dran. Nur an Stretch allein scheint es nicht zu liegen. Bei buster tritt auch diese Medlung auf.
rock64@rock64:/opt/iobroker$ iobroker upgrade backitup Update backitup from @1.4.5 to @1.5.6 host.rock64 Adapter "system.adapter.backitup.0" is stopped. NPM version: 6.14.4 npm install iobroker.backitup@1.5.6 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.28 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above error info sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:10: fatal error: vips/vips8: No such file or directory #include <vips/vips8> ^~~~~~~~~~~~ compilation terminated. make: *** [sharp.target.mk:139: Release/obj.target/sharp/src/common.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.4.213-rockchip64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/sharp gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok upload [3] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/words.js words.js application/javascript Update "system.adapter.backitup.0" upload [2] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index_m.html index_m.html text/html upload [1] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index.html index.html text/html upload [0] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/backitup.png backitup.png image/png Adapter "backitup" updated host.rock64 Adapter "system.adapter.backitup.0" is startedDie Updates laufen trotz der Fehlermeldung.
Hardware: Rock64
JS-Controller: 3.0.20
Dist (stable buster):rock64@rock64:/opt/iobroker$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: busterNode/NodeJS:
rock64@rock64:/opt/iobroker$ node -v v12.16.3 rock64@rock64:/opt/iobroker$ nodejs -v v12.16.3Grüße
-
@Thomas-Braun sagte in Update js-controller und node.js:
@klausiob Du brauchst ein aktuelles libvips bzw. libvips-dev
Ich fürchte nur, das baut keiner für Stretch.Hallöchen,
ich häng mich hier mal mit dran. Nur an Stretch allein scheint es nicht zu liegen. Bei buster tritt auch diese Medlung auf.
rock64@rock64:/opt/iobroker$ iobroker upgrade backitup Update backitup from @1.4.5 to @1.5.6 host.rock64 Adapter "system.adapter.backitup.0" is stopped. NPM version: 6.14.4 npm install iobroker.backitup@1.5.6 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.28 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above error info sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:10: fatal error: vips/vips8: No such file or directory #include <vips/vips8> ^~~~~~~~~~~~ compilation terminated. make: *** [sharp.target.mk:139: Release/obj.target/sharp/src/common.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.4.213-rockchip64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/sharp gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok upload [3] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/words.js words.js application/javascript Update "system.adapter.backitup.0" upload [2] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index_m.html index_m.html text/html upload [1] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index.html index.html text/html upload [0] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/backitup.png backitup.png image/png Adapter "backitup" updated host.rock64 Adapter "system.adapter.backitup.0" is startedDie Updates laufen trotz der Fehlermeldung.
Hardware: Rock64
JS-Controller: 3.0.20
Dist (stable buster):rock64@rock64:/opt/iobroker$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: busterNode/NodeJS:
rock64@rock64:/opt/iobroker$ node -v v12.16.3 rock64@rock64:/opt/iobroker$ nodejs -v v12.16.3Grüße
@Smartuser sagte in Update js-controller und node.js:
Nur an Stretch allein scheint es nicht zu liegen.
Nein, auch in buster muss man noch Hand anlegen. Aber deutlich weniger als unter stretch.
-
@Smartuser sagte in Update js-controller und node.js:
Nur an Stretch allein scheint es nicht zu liegen.
Nein, auch in buster muss man noch Hand anlegen. Aber deutlich weniger als unter stretch.
@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser sagte in Update js-controller und node.js:
Nur an Stretch allein scheint es nicht zu liegen.
Nein, auch in buster muss man noch Hand anlegen. Aber deutlich weniger als unter stretch.
Ja scheint so :)
Hast du einen Tip/Link wie und wo man Hand anlegt um die Meldungen wegzubekommen?
Die Suche hat mir leider noch nicht weitergeholfen.Grüße
-
@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser sagte in Update js-controller und node.js:
Nur an Stretch allein scheint es nicht zu liegen.
Nein, auch in buster muss man noch Hand anlegen. Aber deutlich weniger als unter stretch.
Ja scheint so :)
Hast du einen Tip/Link wie und wo man Hand anlegt um die Meldungen wegzubekommen?
Die Suche hat mir leider noch nicht weitergeholfen.Grüße
@Smartuser
Leg mal so Hand an:sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev libpixman-1-0 -
@Smartuser
Leg mal so Hand an:sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev libpixman-1-0@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser
Leg mal so Hand an:sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev libpixman-1-0Danke für deine schnellen Rückmeldungen.:+1:
In dem Fall ist scheinbar alles schon in der aktuellsten Version vorhanden:rock64@rock64:~$ sudo apt-get install build-essential libcairo2-dev libpango1.0- dev libjpeg-dev libgif-dev librsvg2-dev libpixman-1-0 [sudo] password for rock64: Reading package lists... Done Building dependency tree Reading state information... Done build-essential is already the newest version (12.6). libcairo2-dev is already the newest version (1.16.0-4). libgif-dev is already the newest version (5.1.4-3). libjpeg-dev is already the newest version (1:1.5.2-2). librsvg2-dev is already the newest version (2.44.10-2.1). libpango1.0-dev is already the newest version (1.42.4-7~deb10u1). libpixman-1-0 is already the newest version (0.36.0-1). libpixman-1-0 set to manually installed. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. rock64@rock64:~$Grüße
-
@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser
Leg mal so Hand an:sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev libpixman-1-0Danke für deine schnellen Rückmeldungen.:+1:
In dem Fall ist scheinbar alles schon in der aktuellsten Version vorhanden:rock64@rock64:~$ sudo apt-get install build-essential libcairo2-dev libpango1.0- dev libjpeg-dev libgif-dev librsvg2-dev libpixman-1-0 [sudo] password for rock64: Reading package lists... Done Building dependency tree Reading state information... Done build-essential is already the newest version (12.6). libcairo2-dev is already the newest version (1.16.0-4). libgif-dev is already the newest version (5.1.4-3). libjpeg-dev is already the newest version (1:1.5.2-2). librsvg2-dev is already the newest version (2.44.10-2.1). libpango1.0-dev is already the newest version (1.42.4-7~deb10u1). libpixman-1-0 is already the newest version (0.36.0-1). libpixman-1-0 set to manually installed. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. rock64@rock64:~$Grüße
libpixman-1-0 set to manually installedMusst du also mal manuell angelegt haben. Bei Upgrades wird der dann nicht mehr angepasst.
-
libpixman-1-0 set to manually installedMusst du also mal manuell angelegt haben. Bei Upgrades wird der dann nicht mehr angepasst.
@Thomas-Braun sagte in Update js-controller und node.js:
libpixman-1-0 set to manually installedMusst du also mal manuell angelegt haben. Bei Upgrades wird der dann nicht mehr angepasst.
Moin ...
nein eigentlich nicht. Es ist ein frisch aufgesetztes Buster (Stable). Iobroker drauf, Backup eingespielt, proftp und cifs pakete drauf ... fertig.
Wenn libpixman manuell installiert wurde, müsste es bei der Installation von iobroker passiert sein.Kann das sein?
Wie bekomme ich es behoben, so dass es wieder bei den upgrades mit angepasst wird?Grüße
-
libpixman-1-0 set to manually installedMusst du also mal manuell angelegt haben. Bei Upgrades wird der dann nicht mehr angepasst.
@Thomas-Braun Habe auch nochmal die Essentials wie oben installiert. War auch alles aktuell, nur gif noch dazu installiert.
Meldete auchlibpixman-1-0 set to manually installed.obwohl ich nie was manuell installiert hatte.
Distributor ID: Raspbian Description: Raspbian GNU/Linux 9.6 (stretch) Release: 9.6 Codename: stretchAlso bringt buster-Installation auch nichts?
$ ./iobroker upgrade hs100 Update hs100 from @1.1.2 to @1.1.5 NPM version: 6.14.4npm install iobroker.hs100@1.1.5 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.24 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above errorinfo sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:22: fatal error: vips/vips8: Datei oder Verzeichnis nicht gefunden #include <vips/vips8> ^compilation terminated. make: *** [Release/obj.target/sharp/src/common.o] Fehler 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:191:23)gyp ERR! stack at ChildProcess.emit (events.js:198:13)gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12) gyp ERR! System Linux 4.14.79-v7+ gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/sharpgyp ERR! node -v v10.20.1gyp ERR! node-gyp -v v5.1.0gyp ERR! not ok upload [3] hs100.admin /opt/iobroker/node_modules/iobroker.hs100/admin/words.js words.js application/javascript Adapter "system.adapter.hs100.0" restarted. Update "system.adapter.hs100.0" upload [2] hs100.admin /opt/iobroker/node_modules/iobroker.hs100/admin/index_m.html index_m.html text/html upload [1] hs100.admin /opt/iobroker/node_modules/iobroker.hs100/admin/index.html index.html text/html upload [0] hs100.admin /opt/iobroker/node_modules/iobroker.hs100/admin/hs100.png hs100.png image/png Adapter "hs100" updated process exited with code 0Problem bleibt bei fast jedem Adapteruodate. Problem liegt doch offenbar in dem Bereich.
sharp Use with glibc 2.24 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above errorinfo sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:22: fatal error: vips/vips8: Datei oder Verzeichnis nicht gefunden #include <vips/vips8> ^compilation terminated. make: *** [Release/obj.target/sharp/src/common.o] Fehler 1Pi4B, Pi3B+, Master-Slave, EchoPlus, 3xEchoDot, FireTVstick, Xiaomi Sensoren, Fritzbox, DECT200, HS100, ZBT-ExtendedColor (ALDI), Shelly 2.5, 2xZigBee-Router-Plugs, Sileno 500 smart, Somfy switch, IONIQ5, tibber
node.js: 22.21.0 - npm: 10.9.4 - linux: raspbian-trixie - admin 7.7.19 - vis 1.5.6 - js-controller: 7.0.7 -
@Thomas-Braun sagte in Update js-controller und node.js:
libpixman-1-0 set to manually installedMusst du also mal manuell angelegt haben. Bei Upgrades wird der dann nicht mehr angepasst.
Moin ...
nein eigentlich nicht. Es ist ein frisch aufgesetztes Buster (Stable). Iobroker drauf, Backup eingespielt, proftp und cifs pakete drauf ... fertig.
Wenn libpixman manuell installiert wurde, müsste es bei der Installation von iobroker passiert sein.Kann das sein?
Wie bekomme ich es behoben, so dass es wieder bei den upgrades mit angepasst wird?Grüße
sudo apt update sudo apt dist-upgrade sudo apt install --reinstall libpixman-1-0 libpixman-1-dev -
@Thomas-Braun Habe auch nochmal die Essentials wie oben installiert. War auch alles aktuell, nur gif noch dazu installiert.
Meldete auchlibpixman-1-0 set to manually installed.obwohl ich nie was manuell installiert hatte.
Distributor ID: Raspbian Description: Raspbian GNU/Linux 9.6 (stretch) Release: 9.6 Codename: stretchAlso bringt buster-Installation auch nichts?
$ ./iobroker upgrade hs100 Update hs100 from @1.1.2 to @1.1.5 NPM version: 6.14.4npm install iobroker.hs100@1.1.5 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.24 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above errorinfo sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:22: fatal error: vips/vips8: Datei oder Verzeichnis nicht gefunden #include <vips/vips8> ^compilation terminated. make: *** [Release/obj.target/sharp/src/common.o] Fehler 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:191:23)gyp ERR! stack at ChildProcess.emit (events.js:198:13)gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12) gyp ERR! System Linux 4.14.79-v7+ gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/sharpgyp ERR! node -v v10.20.1gyp ERR! node-gyp -v v5.1.0gyp ERR! not ok upload [3] hs100.admin /opt/iobroker/node_modules/iobroker.hs100/admin/words.js words.js application/javascript Adapter "system.adapter.hs100.0" restarted. Update "system.adapter.hs100.0" upload [2] hs100.admin /opt/iobroker/node_modules/iobroker.hs100/admin/index_m.html index_m.html text/html upload [1] hs100.admin /opt/iobroker/node_modules/iobroker.hs100/admin/index.html index.html text/html upload [0] hs100.admin /opt/iobroker/node_modules/iobroker.hs100/admin/hs100.png hs100.png image/png Adapter "hs100" updated process exited with code 0Problem bleibt bei fast jedem Adapteruodate. Problem liegt doch offenbar in dem Bereich.
sharp Use with glibc 2.24 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above errorinfo sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:22: fatal error: vips/vips8: Datei oder Verzeichnis nicht gefunden #include <vips/vips8> ^compilation terminated. make: *** [Release/obj.target/sharp/src/common.o] Fehler 1@klausiob sagte in Update js-controller und node.js:
libvips >= 8.9.1
Muss in dieser Version installiert sein. Das ist auf stretch aber blöder hantier. Da muss einiges umgebaut werden.
-
@klausiob sagte in Update js-controller und node.js:
libvips >= 8.9.1
Muss in dieser Version installiert sein. Das ist auf stretch aber blöder hantier. Da muss einiges umgebaut werden.
Hilft das hier weiter?
https://sharp.pixelplumbing.com/installPi4B, Pi3B+, Master-Slave, EchoPlus, 3xEchoDot, FireTVstick, Xiaomi Sensoren, Fritzbox, DECT200, HS100, ZBT-ExtendedColor (ALDI), Shelly 2.5, 2xZigBee-Router-Plugs, Sileno 500 smart, Somfy switch, IONIQ5, tibber
node.js: 22.21.0 - npm: 10.9.4 - linux: raspbian-trixie - admin 7.7.19 - vis 1.5.6 - js-controller: 7.0.7 -
Hilft das hier weiter?
https://sharp.pixelplumbing.com/install@klausiob Mir schon. Muss dir aber ja helfen...
Von der Seite her weiß ich ja, das es blöder Hantier auf einem Stretch mit ARM-Architektur und glibc < 2.28 ist. -
sudo apt update sudo apt dist-upgrade sudo apt install --reinstall libpixman-1-0 libpixman-1-dev@Thomas-Braun sagte in Update js-controller und node.js:
sudo apt update sudo apt dist-upgrade sudo apt install --reinstall libpixman-1-0 libpixman-1-devHilft leider auch nicht.
sudo apt update und sudo apt dist-upgrade durchgeführt, danach:rock64@rock64:~$ sudo apt install --reinstall libpixman-1-0 libpixman-1-dev Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/889 kB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... 42427 files and directories currently installed.) Preparing to unpack .../libpixman-1-0_0.36.0-1_arm64.deb ... Unpacking libpixman-1-0:arm64 (0.36.0-1) over (0.36.0-1) ... Preparing to unpack .../libpixman-1-dev_0.36.0-1_arm64.deb ... Unpacking libpixman-1-dev:arm64 (0.36.0-1) over (0.36.0-1) ... Setting up libpixman-1-0:arm64 (0.36.0-1) ... Setting up libpixman-1-dev:arm64 (0.36.0-1) ... Processing triggers for libc-bin (2.28-10) ... rock64@rock64:~$Ist sauber durchgelaufen, zur sicherheit reboot durchgeführt. Danach ein adapter upgrade gestartet.
Das Ergebnis bleibt unverändert.rock64@rock64:/opt/iobroker$ iobroker upgrade rpi2 Update rpi2 from @1.1.1 to @1.2.0 NPM version: 6.14.4 npm install iobroker.rpi2@1.2.0 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.28 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above error info sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:10: fatal error: vips/vips8: No such file or directory #include <vips/vips8> ^~~~~~~~~~~~ compilation terminated. make: *** [sharp.target.mk:139: Release/obj.target/sharp/src/common.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.4.213-rockchip64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/sharp gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok upload [3] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/words.js words.js application/javascript Update "system.adapter.rpi2.0" upload [2] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/rpi.png rpi.png image/png upload [1] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/index_m.html index_m.html text/html upload [0] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/index.html index.html text/html Adapter "rpi2" updated rock64@rock64:/opt/iobroker$Grüße
-
@Thomas-Braun sagte in Update js-controller und node.js:
sudo apt update sudo apt dist-upgrade sudo apt install --reinstall libpixman-1-0 libpixman-1-devHilft leider auch nicht.
sudo apt update und sudo apt dist-upgrade durchgeführt, danach:rock64@rock64:~$ sudo apt install --reinstall libpixman-1-0 libpixman-1-dev Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/889 kB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... 42427 files and directories currently installed.) Preparing to unpack .../libpixman-1-0_0.36.0-1_arm64.deb ... Unpacking libpixman-1-0:arm64 (0.36.0-1) over (0.36.0-1) ... Preparing to unpack .../libpixman-1-dev_0.36.0-1_arm64.deb ... Unpacking libpixman-1-dev:arm64 (0.36.0-1) over (0.36.0-1) ... Setting up libpixman-1-0:arm64 (0.36.0-1) ... Setting up libpixman-1-dev:arm64 (0.36.0-1) ... Processing triggers for libc-bin (2.28-10) ... rock64@rock64:~$Ist sauber durchgelaufen, zur sicherheit reboot durchgeführt. Danach ein adapter upgrade gestartet.
Das Ergebnis bleibt unverändert.rock64@rock64:/opt/iobroker$ iobroker upgrade rpi2 Update rpi2 from @1.1.1 to @1.2.0 NPM version: 6.14.4 npm install iobroker.rpi2@1.2.0 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.28 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above error info sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:10: fatal error: vips/vips8: No such file or directory #include <vips/vips8> ^~~~~~~~~~~~ compilation terminated. make: *** [sharp.target.mk:139: Release/obj.target/sharp/src/common.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.4.213-rockchip64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/sharp gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok upload [3] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/words.js words.js application/javascript Update "system.adapter.rpi2.0" upload [2] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/rpi.png rpi.png image/png upload [1] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/index_m.html index_m.html text/html upload [0] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/index.html index.html text/html Adapter "rpi2" updated rock64@rock64:/opt/iobroker$Grüße
-
@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser sagte in Update js-controller und node.js:
Adapter "rpi2" updated
Hat doch funktioniert.
Ja ... die Updates funktionieren scheinbar immer. Das hatte ich oben auch so geschrieben:
Zitat: Die Updates laufen trotz der Fehlermeldung.'________
Allerdings scheint es zum Beispiel beim iot adapter nicht richtig zu funktionieren:
rock64@rock64:~$ cd /opt/iobroker/ rock64@rock64:/opt/iobroker$ iobroker upgrade iot Update iot from @1.4.12 to @1.4.14 host.rock64 Adapter "system.adapter.iot.0" is stopped. NPM version: 6.14.4 npm install iobroker.iot@1.4.14 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.28 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above error info sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:10: fatal error: vips/vips8: No such file or directory #include <vips/vips8> ^~~~~~~~~~~~ compilation terminated. make: *** [sharp.target.mk:139: Release/obj.target/sharp/src/common.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.4.213-rockchip64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/sharp gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok Update "system.adapter.iot.0" upload [20] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/runtime-main.814e5fd0.js.map static/js/runtime-main.814e5fd0.js.map application/json upload [19] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/runtime-main.814e5fd0.js static/js/runtime-main.814e5fd0.js application/javascript upload [18] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/main.25253be6.chunk.js.map static/js/main.25253be6.chunk.js.map application/json upload [17] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/main.25253be6.chunk.js static/js/main.25253be6.chunk.js application/javascript upload [16] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.d2785704.chunk.js.map static/js/2.d2785704.chunk.js.map application/json upload [15] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.d2785704.chunk.js.LICENSE.txt static/js/2.d2785704.chunk.js.LICENSE.txt text/plain upload [14] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.d2785704.chunk.js static/js/2.d2785704.chunk.js application/javascript upload [13] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/main.d4bed9c6.chunk.css.map static/css/main.d4bed9c6.chunk.css.map application/json upload [12] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/main.d4bed9c6.chunk.css static/css/main.d4bed9c6.chunk.css text/css upload [11] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/2.0302007b.chunk.css.map static/css/2.0302007b.chunk.css.map application/json upload [10] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/2.0302007b.chunk.css static/css/2.0302007b.chunk.css text/css upload [9] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/service-worker.js service-worker.js application/javascript upload [8] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/precache-manifest.eb98f59fee6c2799b8871e4dd4a03e90.js precache-manifest.eb98f59fee6c2799b8871e4dd4a03e90.js application/javascript upload [7] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/manifest.json manifest.json application/json upload [6] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/iot.png iot.png image/png upload [5] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/index_m.html index_m.html text/html upload [4] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/favicon.ico favicon.ico image/vnd.microsoft.icon upload [3] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/blockly.js blockly.js application/javascript upload [2] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/asset-manifest.json asset-manifest.json application/json upload [1] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/alexalogo.png alexalogo.png image/png upload [0] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/actions.js actions.js application/javascript Adapter "iot" updated host.rock64 Adapter "system.adapter.iot.0" is started rock64@rock64:/opt/iobroker$Hier tritt neben (oder durch?) das libvibs-problem noch ein problem mit sharp auf.
Und dieser stört sich auch daran, er meldet im log immer:iot.0 2020-05-09 11:00:08.814 warn - /opt/iobroker/node_modules/iobroker.iot/main.js iot.0 2020-05-09 11:00:08.814 warn - /opt/iobroker/node_modules/iobroker.iot/lib/alexaCustomBlood.js iot.0 2020-05-09 11:00:08.814 warn - /opt/iobroker/node_modules/iobroker.iot/lib/getImage.js iot.0 2020-05-09 11:00:08.814 warn Require stack: iot.0 2020-05-09 11:00:08.814 warn (11435) Cannot initialize getImage: Error: Cannot find module 'sharp'Daher hätte ich gern die Fehler weg um auszuschließen, dass bei einigen Adaptern etwas schief läuft :)
Grüße
-
@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser sagte in Update js-controller und node.js:
Adapter "rpi2" updated
Hat doch funktioniert.
Ja ... die Updates funktionieren scheinbar immer. Das hatte ich oben auch so geschrieben:
Zitat: Die Updates laufen trotz der Fehlermeldung.'________
Allerdings scheint es zum Beispiel beim iot adapter nicht richtig zu funktionieren:
rock64@rock64:~$ cd /opt/iobroker/ rock64@rock64:/opt/iobroker$ iobroker upgrade iot Update iot from @1.4.12 to @1.4.14 host.rock64 Adapter "system.adapter.iot.0" is stopped. NPM version: 6.14.4 npm install iobroker.iot@1.4.14 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.28 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above error info sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:10: fatal error: vips/vips8: No such file or directory #include <vips/vips8> ^~~~~~~~~~~~ compilation terminated. make: *** [sharp.target.mk:139: Release/obj.target/sharp/src/common.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.4.213-rockchip64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/sharp gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok Update "system.adapter.iot.0" upload [20] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/runtime-main.814e5fd0.js.map static/js/runtime-main.814e5fd0.js.map application/json upload [19] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/runtime-main.814e5fd0.js static/js/runtime-main.814e5fd0.js application/javascript upload [18] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/main.25253be6.chunk.js.map static/js/main.25253be6.chunk.js.map application/json upload [17] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/main.25253be6.chunk.js static/js/main.25253be6.chunk.js application/javascript upload [16] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.d2785704.chunk.js.map static/js/2.d2785704.chunk.js.map application/json upload [15] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.d2785704.chunk.js.LICENSE.txt static/js/2.d2785704.chunk.js.LICENSE.txt text/plain upload [14] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.d2785704.chunk.js static/js/2.d2785704.chunk.js application/javascript upload [13] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/main.d4bed9c6.chunk.css.map static/css/main.d4bed9c6.chunk.css.map application/json upload [12] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/main.d4bed9c6.chunk.css static/css/main.d4bed9c6.chunk.css text/css upload [11] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/2.0302007b.chunk.css.map static/css/2.0302007b.chunk.css.map application/json upload [10] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/2.0302007b.chunk.css static/css/2.0302007b.chunk.css text/css upload [9] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/service-worker.js service-worker.js application/javascript upload [8] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/precache-manifest.eb98f59fee6c2799b8871e4dd4a03e90.js precache-manifest.eb98f59fee6c2799b8871e4dd4a03e90.js application/javascript upload [7] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/manifest.json manifest.json application/json upload [6] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/iot.png iot.png image/png upload [5] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/index_m.html index_m.html text/html upload [4] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/favicon.ico favicon.ico image/vnd.microsoft.icon upload [3] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/blockly.js blockly.js application/javascript upload [2] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/asset-manifest.json asset-manifest.json application/json upload [1] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/alexalogo.png alexalogo.png image/png upload [0] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/actions.js actions.js application/javascript Adapter "iot" updated host.rock64 Adapter "system.adapter.iot.0" is started rock64@rock64:/opt/iobroker$Hier tritt neben (oder durch?) das libvibs-problem noch ein problem mit sharp auf.
Und dieser stört sich auch daran, er meldet im log immer:iot.0 2020-05-09 11:00:08.814 warn - /opt/iobroker/node_modules/iobroker.iot/main.js iot.0 2020-05-09 11:00:08.814 warn - /opt/iobroker/node_modules/iobroker.iot/lib/alexaCustomBlood.js iot.0 2020-05-09 11:00:08.814 warn - /opt/iobroker/node_modules/iobroker.iot/lib/getImage.js iot.0 2020-05-09 11:00:08.814 warn Require stack: iot.0 2020-05-09 11:00:08.814 warn (11435) Cannot initialize getImage: Error: Cannot find module 'sharp'Daher hätte ich gern die Fehler weg um auszuschließen, dass bei einigen Adaptern etwas schief läuft :)
Grüße
@Smartuser
libvips und sharp hängen zusammen. Haben beide mit Bildbearbeitung zu tun.
Dann lass uns mal genau schauen, mit was du da unterwegs bist:ldd --version lsb_release -a uname -a -
@Smartuser
libvips und sharp hängen zusammen. Haben beide mit Bildbearbeitung zu tun.
Dann lass uns mal genau schauen, mit was du da unterwegs bist:ldd --version lsb_release -a uname -a@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser
libvips und sharp hängen zusammen. Haben beide mit Bildbearbeitung zu tun.
Dann lass uns mal genau schauen, mit was du da unterwegs bist:ldd --version lsb_release -a uname -aDanke schonmal!
So sieht das Ganze aus:rock64@rock64:~$ ldd --version ldd (Debian GLIBC 2.28-10) 2.28 Copyright (C) 2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Written by Roland McGrath and Ulrich Drepper. rock64@rock64:~$rock64@rock64:~$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster rock64@rock64:~$rock64@rock64:~$ uname -a Linux rock64 4.4.213-rockchip64 #27 SMP Tue Apr 14 17:21:23 CEST 2020 aarch64 GNU/Linux rock64@rock64:~$Grüße
-
@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser
libvips und sharp hängen zusammen. Haben beide mit Bildbearbeitung zu tun.
Dann lass uns mal genau schauen, mit was du da unterwegs bist:ldd --version lsb_release -a uname -aDanke schonmal!
So sieht das Ganze aus:rock64@rock64:~$ ldd --version ldd (Debian GLIBC 2.28-10) 2.28 Copyright (C) 2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Written by Roland McGrath and Ulrich Drepper. rock64@rock64:~$rock64@rock64:~$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster rock64@rock64:~$rock64@rock64:~$ uname -a Linux rock64 4.4.213-rockchip64 #27 SMP Tue Apr 14 17:21:23 CEST 2020 aarch64 GNU/Linux rock64@rock64:~$Grüße
@Smartuser Noch was vergessen...
Node ist sauber installiert? Und das System auch auf dem letzten Stand?nodejs -v sudo apt update && sudo apt dist-upgrade -
@Smartuser Noch was vergessen...
Node ist sauber installiert? Und das System auch auf dem letzten Stand?nodejs -v sudo apt update && sudo apt dist-upgrade@Thomas-Braun sagte in Update js-controller und node.js:
@Smartuser Noch was vergessen...
Node ist sauber installiert? Und das System auch auf dem letzten Stand?nodejs -v sudo apt update && sudo apt dist-upgraderock64@rock64:~$ nodejs -v v12.16.3 rock64@rock64:~$Interessant heute morgen brachte dist-upgrade keine Neuerungen, jetzt folgende:
rock64@rock64:~$ sudo apt update && sudo apt dist-upgrade [sudo] password for rock64: Get:1 http://httpredir.debian.org/debian buster InRelease [121 kB] Get:2 http://security.debian.org buster/updates InRelease [65.4 kB] Hit:4 https://deb.nodesource.com/node_12.x buster InRelease Get:5 http://httpredir.debian.org/debian buster-updates InRelease [49.3 kB] Get:6 http://httpredir.debian.org/debian buster-backports InRelease [46.7 kB] Hit:3 https://apt.armbian.com buster InRelease Get:7 http://httpredir.debian.org/debian buster/main arm64 Packages [10.5 MB] Get:8 http://httpredir.debian.org/debian buster-backports/main arm64 Packages.diff/Index [27.8 kB] Get:9 http://httpredir.debian.org/debian buster-backports/main armhf Packages.diff/Index [27.8 kB] Get:10 http://httpredir.debian.org/debian buster-backports/main arm64 Contents (deb).diff/Index [27.9 kB] Get:11 http://httpredir.debian.org/debian buster-backports/main armhf Contents (deb).diff/Index [27.9 kB] Get:12 http://httpredir.debian.org/debian buster-backports/main arm64 Packages 2020-05-09-1408.15.pdiff [198 B] Get:13 http://httpredir.debian.org/debian buster-backports/main armhf Packages 2020-05-09-1408.15.pdiff [199 B] Get:12 http://httpredir.debian.org/debian buster-backports/main arm64 Packages 2020-05-09-1408.15.pdiff [198 B] Get:13 http://httpredir.debian.org/debian buster-backports/main armhf Packages 2020-05-09-1408.15.pdiff [199 B] Get:14 http://httpredir.debian.org/debian buster-backports/main arm64 Contents (deb) 2020-05-09-1408.15.pdiff [241 B] Get:14 http://httpredir.debian.org/debian buster-backports/main arm64 Contents (deb) 2020-05-09-1408.15.pdiff [241 B] Get:15 http://httpredir.debian.org/debian buster-backports/main armhf Contents (deb) 2020-05-09-1408.15.pdiff [242 B] Get:15 http://httpredir.debian.org/debian buster-backports/main armhf Contents (deb) 2020-05-09-1408.15.pdiff [242 B] Get:16 http://httpredir.debian.org/debian buster/main armhf Packages [10.5 MB] Get:17 http://httpredir.debian.org/debian buster/main armhf Contents (deb) [36.1 MB] Get:18 http://httpredir.debian.org/debian buster/main arm64 Contents (deb) [36.3 MB] Get:19 http://httpredir.debian.org/debian buster/contrib arm64 Packages [46.8 kB] Get:20 http://httpredir.debian.org/debian buster/contrib armhf Packages [48.9 kB] Get:21 http://httpredir.debian.org/debian buster/contrib arm64 Contents (deb) [84.8 kB] Get:22 http://httpredir.debian.org/debian buster/contrib armhf Contents (deb) [85.5 kB] Get:23 http://httpredir.debian.org/debian buster/non-free arm64 Packages [64.3 kB] Get:24 http://httpredir.debian.org/debian buster/non-free armhf Packages [74.5 kB] Get:25 http://httpredir.debian.org/debian buster/non-free armhf Contents (deb) [779 kB] Get:26 http://httpredir.debian.org/debian buster/non-free arm64 Contents (deb) [773 kB] Fetched 95.7 MB in 1min 9s (1,396 kB/s) Reading package lists... Done Building dependency tree Reading state information... Done 25 packages can be upgraded. Run 'apt list --upgradable' to see them. N: Repository 'http://httpredir.debian.org/debian buster InRelease' changed its 'Version' value from '10.3' to '10.4' Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: base-files distro-info-data fuse gir1.2-pango-1.0 iputils-arping iputils-ping libfuse2 libnss-myhostname libpam-systemd libpango-1.0-0 libpango1.0-dev libpangocairo-1.0-0 libpangoft2-1.0-0 libpangoxft-1.0-0 libsystemd0 libudev-dev libudev1 linux-libc-dev pango1.0-tools proftpd-basic systemd systemd-sysv tzdata udev wpasupplicant 25 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 11.8 MB of archives. After this operation, 50.2 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://httpredir.debian.org/debian buster/main arm64 base-files arm64 10.3+deb10u4 [69.8 kB] Get:2 http://httpredir.debian.org/debian buster/main arm64 systemd-sysv arm64 241-7~deb10u4 [99.9 kB] Get:3 http://httpredir.debian.org/debian buster/main arm64 libpam-systemd arm64 241-7~deb10u4 [200 kB] Get:4 http://httpredir.debian.org/debian buster/main arm64 libudev-dev arm64 241-7~deb10u4 [110 kB] Get:5 http://httpredir.debian.org/debian buster/main arm64 libsystemd0 arm64 241-7~deb10u4 [313 kB] Get:6 http://httpredir.debian.org/debian buster/main arm64 libnss-myhostname arm64 241-7~deb10u4 [122 kB] Get:7 http://httpredir.debian.org/debian buster/main arm64 systemd arm64 241-7~deb10u4 [3,256 kB] Get:8 http://httpredir.debian.org/debian buster/main arm64 udev arm64 241-7~deb10u4 [1,246 kB] Get:9 http://httpredir.debian.org/debian buster/main arm64 libudev1 arm64 241-7~deb10u4 [146 kB] Get:10 http://httpredir.debian.org/debian buster/main arm64 tzdata all 2020a-0+deb10u1 [263 kB] Get:11 http://httpredir.debian.org/debian buster/main arm64 iputils-ping arm64 3:20180629-2+deb10u1 [42.9 kB] Get:12 http://httpredir.debian.org/debian buster/main arm64 distro-info-data all 0.41+deb10u2 [6,584 B] Get:13 http://httpredir.debian.org/debian buster/main arm64 fuse arm64 2.9.9-1+deb10u1 [71.4 kB] Get:14 http://httpredir.debian.org/debian buster/main arm64 libfuse2 arm64 2.9.9-1+deb10u1 [123 kB] Get:15 http://httpredir.debian.org/debian buster/main arm64 pango1.0-tools arm64 1.42.4-8~deb10u1 [55.2 kB] Get:16 http://httpredir.debian.org/debian buster/main arm64 libpango1.0-dev arm64 1.42.4-8~deb10u1 [139 kB] Get:17 http://httpredir.debian.org/debian buster/main arm64 libpango-1.0-0 arm64 1.42.4-8~deb10u1 [179 kB] Get:18 http://httpredir.debian.org/debian buster/main arm64 libpangoft2-1.0-0 arm64 1.42.4-8~deb10u1 [65.7 kB] Get:19 http://httpredir.debian.org/debian buster/main arm64 libpangocairo-1.0-0 arm64 1.42.4-8~deb10u1 [54.0 kB] Get:20 http://httpredir.debian.org/debian buster/main arm64 libpangoxft-1.0-0 arm64 1.42.4-8~deb10u1 [49.1 kB] Get:21 http://httpredir.debian.org/debian buster/main arm64 gir1.2-pango-1.0 arm64 1.42.4-8~deb10u1 [55.8 kB] Get:22 http://httpredir.debian.org/debian buster/main arm64 iputils-arping arm64 3:20180629-2+deb10u1 [20.2 kB] Get:23 http://httpredir.debian.org/debian buster/main arm64 linux-libc-dev arm64 4.19.118-2 [1,332 kB] Get:24 http://httpredir.debian.org/debian buster/main arm64 proftpd-basic arm64 1.3.6-4+deb10u5 [2,614 kB] Get:25 http://httpredir.debian.org/debian buster/main arm64 wpasupplicant arm64 2:2.7+git20190128+0c1e29f-6+deb10u2 [1,166 kB] Fetched 11.8 MB in 7s (1,719 kB/s) Preconfiguring packages ... (Reading database ... 42427 files and directories currently installed.) Preparing to unpack .../base-files_10.3+deb10u4_arm64.deb ... Unpacking base-files (10.3+deb10u4) over (10.3+deb10u3) ... Setting up base-files (10.3+deb10u4) ... Installing new version of config file /etc/debian_version ... (Reading database ... 42427 files and directories currently installed.) Preparing to unpack .../systemd-sysv_241-7~deb10u4_arm64.deb ... Unpacking systemd-sysv (241-7~deb10u4) over (241-7~deb10u3) ... Preparing to unpack .../libpam-systemd_241-7~deb10u4_arm64.deb ... Unpacking libpam-systemd:arm64 (241-7~deb10u4) over (241-7~deb10u3) ... Preparing to unpack .../libudev-dev_241-7~deb10u4_arm64.deb ... Unpacking libudev-dev:arm64 (241-7~deb10u4) over (241-7~deb10u3) ... Preparing to unpack .../libsystemd0_241-7~deb10u4_arm64.deb ... Unpacking libsystemd0:arm64 (241-7~deb10u4) over (241-7~deb10u3) ... Setting up libsystemd0:arm64 (241-7~deb10u4) ... (Reading database ... 42427 files and directories currently installed.) Preparing to unpack .../libnss-myhostname_241-7~deb10u4_arm64.deb ... Unpacking libnss-myhostname:arm64 (241-7~deb10u4) over (241-7~deb10u3) ... Preparing to unpack .../systemd_241-7~deb10u4_arm64.deb ... Unpacking systemd (241-7~deb10u4) over (241-7~deb10u3) ... Preparing to unpack .../udev_241-7~deb10u4_arm64.deb ... Unpacking udev (241-7~deb10u4) over (241-7~deb10u3) ... Preparing to unpack .../libudev1_241-7~deb10u4_arm64.deb ... Unpacking libudev1:arm64 (241-7~deb10u4) over (241-7~deb10u3) ... Setting up libudev1:arm64 (241-7~deb10u4) ... (Reading database ... 42427 files and directories currently installed.) Preparing to unpack .../00-tzdata_2020a-0+deb10u1_all.deb ... Unpacking tzdata (2020a-0+deb10u1) over (2019c-0+deb10u1) ... Preparing to unpack .../01-iputils-ping_3%3a20180629-2+deb10u1_arm64.deb ... Unpacking iputils-ping (3:20180629-2+deb10u1) over (3:20180629-2) ... Preparing to unpack .../02-distro-info-data_0.41+deb10u2_all.deb ... Unpacking distro-info-data (0.41+deb10u2) over (0.41+deb10u1) ... Preparing to unpack .../03-fuse_2.9.9-1+deb10u1_arm64.deb ... Unpacking fuse (2.9.9-1+deb10u1) over (2.9.9-1) ... Preparing to unpack .../04-libfuse2_2.9.9-1+deb10u1_arm64.deb ... Unpacking libfuse2:arm64 (2.9.9-1+deb10u1) over (2.9.9-1) ... Preparing to unpack .../05-pango1.0-tools_1.42.4-8~deb10u1_arm64.deb ... Unpacking pango1.0-tools (1.42.4-8~deb10u1) over (1.42.4-7~deb10u1) ... Preparing to unpack .../06-libpango1.0-dev_1.42.4-8~deb10u1_arm64.deb ... Unpacking libpango1.0-dev:arm64 (1.42.4-8~deb10u1) over (1.42.4-7~deb10u1) ... Preparing to unpack .../07-libpango-1.0-0_1.42.4-8~deb10u1_arm64.deb ... Unpacking libpango-1.0-0:arm64 (1.42.4-8~deb10u1) over (1.42.4-7~deb10u1) ... Preparing to unpack .../08-libpangoft2-1.0-0_1.42.4-8~deb10u1_arm64.deb ... Unpacking libpangoft2-1.0-0:arm64 (1.42.4-8~deb10u1) over (1.42.4-7~deb10u1) ... Preparing to unpack .../09-libpangocairo-1.0-0_1.42.4-8~deb10u1_arm64.deb ... Unpacking libpangocairo-1.0-0:arm64 (1.42.4-8~deb10u1) over (1.42.4-7~deb10u1) ... Preparing to unpack .../10-libpangoxft-1.0-0_1.42.4-8~deb10u1_arm64.deb ... Unpacking libpangoxft-1.0-0:arm64 (1.42.4-8~deb10u1) over (1.42.4-7~deb10u1) ... Preparing to unpack .../11-gir1.2-pango-1.0_1.42.4-8~deb10u1_arm64.deb ... Unpacking gir1.2-pango-1.0:arm64 (1.42.4-8~deb10u1) over (1.42.4-7~deb10u1) ... Preparing to unpack .../12-iputils-arping_3%3a20180629-2+deb10u1_arm64.deb ... Unpacking iputils-arping (3:20180629-2+deb10u1) over (3:20180629-2) ... Preparing to unpack .../13-linux-libc-dev_4.19.118-2_arm64.deb ... Unpacking linux-libc-dev:arm64 (4.19.118-2) over (4.19.98-1+deb10u1) ... Preparing to unpack .../14-proftpd-basic_1.3.6-4+deb10u5_arm64.deb ... Unpacking proftpd-basic (1.3.6-4+deb10u5) over (1.3.6-4+deb10u4) ... Preparing to unpack .../15-wpasupplicant_2%3a2.7+git20190128+0c1e29f-6+deb10u2_arm64.deb ... Unpacking wpasupplicant (2:2.7+git20190128+0c1e29f-6+deb10u2) over (2:2.7+git20190128+0c1e29f-6+deb10u1) ... Setting up distro-info-data (0.41+deb10u2) ... Setting up libpango-1.0-0:arm64 (1.42.4-8~deb10u1) ... Setting up linux-libc-dev:arm64 (4.19.118-2) ... Setting up systemd (241-7~deb10u4) ... Setting up libfuse2:arm64 (2.9.9-1+deb10u1) ... Setting up iputils-arping (3:20180629-2+deb10u1) ... Setting up tzdata (2020a-0+deb10u1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat May 9 19:43:46 UTC 2020. Universal Time is now: Sat May 9 19:43:46 UTC 2020. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up wpasupplicant (2:2.7+git20190128+0c1e29f-6+deb10u2) ... Setting up proftpd-basic (1.3.6-4+deb10u5) ... usermod: no changes Setting up udev (241-7~deb10u4) ... update-initramfs: deferring update (trigger activated) Setting up libnss-myhostname:arm64 (241-7~deb10u4) ... Setting up libudev-dev:arm64 (241-7~deb10u4) ... Setting up libpangoft2-1.0-0:arm64 (1.42.4-8~deb10u1) ... Setting up iputils-ping (3:20180629-2+deb10u1) ... Setting up libpangocairo-1.0-0:arm64 (1.42.4-8~deb10u1) ... Setting up fuse (2.9.9-1+deb10u1) ... update-initramfs: deferring update (trigger activated) Setting up systemd-sysv (241-7~deb10u4) ... Setting up libpangoxft-1.0-0:arm64 (1.42.4-8~deb10u1) ... Setting up pango1.0-tools (1.42.4-8~deb10u1) ... Setting up gir1.2-pango-1.0:arm64 (1.42.4-8~deb10u1) ... Setting up libpango1.0-dev:arm64 (1.42.4-8~deb10u1) ... Setting up libpam-systemd:arm64 (241-7~deb10u4) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for dbus (1.12.16-1) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for initramfs-tools (0.133+deb10u1) ... update-initramfs: Generating /boot/initrd.img-4.4.213-rockchip64 update-initramfs: Converting to u-boot format rock64@rock64:~$Leider zu früh gefreut, ich hab danach einen reboot ausgeführt, aber der Fehler besteht weiterhin.
Hier beim Upgrade vom WEB-Adapter:rock64@rock64:/opt/iobroker$ iobroker upgrade web Update web from @3.0.7 to @3.0.8 host.rock64 Adapter "system.adapter.web.0" is stopped. NPM version: 6.14.4 npm install iobroker.web@3.0.8 --loglevel error --prefix "/opt/iobroker" (System call) ERR! sharp Use with glibc 2.28 requires manual installation of libvips >= 8.9.1 info sharp Attempting to build from source via node-gyp but this may fail due to the above error info sharp Please see https://sharp.pixelplumbing.com/install for required dependencies ../src/common.cc:23:10: fatal error: vips/vips8: No such file or directory #include <vips/vips8> ^~~~~~~~~~~~ compilation terminated. make: *** [sharp.target.mk:139: Release/obj.target/sharp/src/common.o] Error 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12) gyp ERR! System Linux 4.4.213-rockchip64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/sharp gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok upload [3] web.admin /opt/iobroker/node_modules/iobroker.web/admin/words.js words.js application/javascript upload [2] web.admin /opt/iobroker/node_modules/iobroker.web/admin/web.png web.png image/png upload [1] web.admin /opt/iobroker/node_modules/iobroker.web/admin/index_m.html index_m.html text/html upload [0] web.admin /opt/iobroker/node_modules/iobroker.web/admin/index.html index.html text/html upload [350] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/vader/images/ui-bg_highlight-hard_55_555555_1x100.png lib/css/themes/jquery-ui/vader/images/ui-bg_highlight-hard_55_555555_1x100.png image/png upload [300] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/sunny/images/ui-bg_highlight-soft_100_feeebd_1x100.png lib/css/themes/jquery-ui/sunny/images/ui-bg_highlight-soft_100_feeebd_1x100.png image/png upload [250] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/redmond/images/ui-icons_469bdd_256x240.png lib/css/themes/jquery-ui/redmond/images/ui-icons_469bdd_256x240.png image/png upload [200] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/hot-sneaks/images/ui-icons_ffeb33_256x240.png lib/css/themes/jquery-ui/hot-sneaks/images/ui-icons_ffeb33_256x240.png image/png upload [150] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/eggplant/images/ui-icons_ebccce_256x240.png lib/css/themes/jquery-ui/eggplant/images/ui-icons_ebccce_256x240.png image/png upload [100] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/dark-hive/images/ui-bg_highlight-soft_44_444444_1x100.png lib/css/themes/jquery-ui/dark-hive/images/ui-bg_highlight-soft_44_444444_1x100.png image/png upload [90] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/custom-light/images/ui-icons_cd0a0a_256x240.png lib/css/themes/jquery-ui/custom-light/images/ui-icons_cd0a0a_256x240.png image/png upload [80] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/custom-light/images/ui-bg_glass_55_fbf9ee_1x400.png lib/css/themes/jquery-ui/custom-light/images/ui-bg_glass_55_fbf9ee_1x400.png image/png upload [70] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/custom-dark/images/ui-bg_highlight-soft_40_62bfe1_1x100.png lib/css/themes/jquery-ui/custom-dark/images/ui-bg_highlight-soft_40_62bfe1_1x100.png image/png upload [60] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/cupertino/images/ui-icons_2e83ff_256x240.png lib/css/themes/jquery-ui/cupertino/images/ui-icons_2e83ff_256x240.png image/png upload [50] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/cupertino/images/ui-bg_diagonals-thick_90_eeeeee_40x40.png lib/css/themes/jquery-ui/cupertino/images/ui-bg_diagonals-thick_90_eeeeee_40x40.png image/png upload [40] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/blitzer/images/ui-bg_glass_55_fbf8ee_1x400.png lib/css/themes/jquery-ui/blitzer/images/ui-bg_glass_55_fbf8ee_1x400.png image/png upload [30] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/black-tie/images/ui-icons_ffcf29_256x240.png lib/css/themes/jquery-ui/black-tie/images/ui-icons_ffcf29_256x240.png image/png upload [20] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/black-tie/images/ui-bg_glass_55_1c1c1c_1x400.png lib/css/themes/jquery-ui/black-tie/images/ui-bg_glass_55_1c1c1c_1x400.png image/png upload [19] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/black-tie/images/ui-bg_glass_40_111111_1x400.png lib/css/themes/jquery-ui/black-tie/images/ui-bg_glass_40_111111_1x400.png image/png upload [18] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/black-tie/images/ui-bg_flat_65_ffffff_40x100.png lib/css/themes/jquery-ui/black-tie/images/ui-bg_flat_65_ffffff_40x100.png image/png upload [17] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/themes/jquery-ui/black-tie/images/ui-bg_diagonals-thick_8_333333_40x40.png lib/css/themes/jquery-ui/black-tie/images/ui-bg_diagonals-thick_8_333333_40x40.png image/png upload [16] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/style.css lib/css/style.css text/css upload [15] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/materialize.css lib/css/materialize.css text/css upload [14] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/jqGrid/ui.jqgrid-4.5.4.css lib/css/jqGrid/ui.jqgrid-4.5.4.css text/css upload [13] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/jqGrid/ellipsis-xbl.xml lib/css/jqGrid/ellipsis-xbl.xml application/xml upload [12] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/iob/selectID.css.map lib/css/iob/selectID.css.map application/json upload [11] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/iob/selectID.css lib/css/iob/selectID.css text/css upload [10] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/fancytree/ui.fancytree.min.css lib/css/fancytree/ui.fancytree.min.css text/css upload [9] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/fancytree/ui.fancytree.min-win7.css lib/css/fancytree/ui.fancytree.min-win7.css text/css upload [8] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/fancytree/ui.fancytree.jquery.min.css lib/css/fancytree/ui.fancytree.jquery.min.css text/css upload [7] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/fancytree/state.png lib/css/fancytree/state.png image/png upload [6] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/fancytree/loading.gif lib/css/fancytree/loading.gif image/gif upload [5] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/fancytree/icons.gif lib/css/fancytree/icons.gif image/gif upload [4] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/fancytree/device.png lib/css/fancytree/device.png image/png upload [3] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/fancytree/channel.png lib/css/fancytree/channel.png image/png upload [2] web /opt/iobroker/node_modules/iobroker.web/www/lib/css/bootstrap.min.css lib/css/bootstrap.min.css text/css upload [1] web /opt/iobroker/node_modules/iobroker.web/www/index.html index.html text/html upload [0] web /opt/iobroker/node_modules/iobroker.web/www/admin/img/admin.png admin/img/admin.png image/png Update "system.adapter.web.0" Adapter "web" updated host.rock64 Adapter "system.adapter.web.0" is started
972
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge