Zigbee Adapter und Conbee Unterstützung

Schuko80

So, habe gestern mal diverse Versuche unternommen, das Ganze ans Laufen zu bringen - deinstallieren - Installieren von Github, Hardreset des Conbee - diverse Male neu gepairt, aber nichts hat geklappt, ich lande immer wieder beim gleichen Fehler.

Jemand noch ne Idee? Ansonsten geht es zurück nach Deconz, auch wenn ich dann ne zweite VM habe :(

EDIT: Stick heute noch mal kurz abgezogen und der Bewegungsmelder funktionierte, Pairing eingeschaltet für eine Lampe und danach wieder alles tot

arteck

@Schuko80 mit den schnippseln kann ich nix anfagen

stell mal bitte ordentliches LOG rein

vor allem was wann sich verabschiedet wenn du es nochvolziehen kannst

Plasmachef

Hallo!

Bin hier grad am Testen und versuche meinen Raspi Pi 4 mit Raspbee II und dem Danalock zusammen zubringen.

Raspbee II eingesteckt und die raspi-config umgestellt
Zigbee über Katze geladen, Instanz angelegt und den Adapter ausgewählt

--> Instanz grün :-)

Instanz und Danalock V3 auf pairing ... jetzt kommts:

2020-04-28 17:50:04.559 - info: zigbee.0 (14579) Starting interview of '0x000b57fffe46ebec'
2020-04-28 17:50:16.207 - info: zigbee.0 (14579) Successfully interviewed '0x000b57fffe46ebec', device has succesfully been paired
2020-04-28 17:50:16.207 - info: zigbee.0 (14579) Device '0x000b57fffe46ebec' is supported, identified as: Danalock BT/ZB smartlock (V3-BTZB)
2020-04-28 17:50:16.209 - info: zigbee.0 (14579) Configuring 0x000b57fffe46ebec V3-BTZB
2020-04-28 17:50:18.218 - error: zigbee.0 (14579) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-04-28 17:50:43.201 - info: zigbee.0 (14579) Zigbee: stop joining
2020-04-28 17:50:50.582 - info: zigbee.0 (14579) Configuring 0x000b57fffe46ebec V3-BTZB
2020-04-28 17:50:53.099 - error: zigbee.0 (14579) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 2 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))

Es werde zwar ein paar Objekte angelegt und er erkennt auch locked und unlocked, aber das wars.

Bitte um Hilfe

Grüße Plasma

Glasfaser

@Plasmachef sagte in Zigbee Adapter und Conbee Unterstützung:

mit Raspbee II

Hier im Thread geht es um Zigbee Adapter und Conbee Unterstützung

haselchen

@Glasfaser , die Docker-Conbee-Polizei :grimacing:

Glasfaser

@Plasmachef

Hier ein Thread zb. Link Text
und gebe auch dein Zigbee Adapter Version an .

Plasmachef

@Glasfaser sorry, dachte, da der Adapter beides kann bin ich hier auch richtig...

"ioBroker adapter for Zigbee devices via TI cc2531/cc2530/cc26x2r/cc2538 and deCONZ ConBee/RaspBee"

Plasmachef

@Glasfaser... so... habe für Samstag das Teil bestellt... sollte der Fehler wieder auftreten, was ich vermute, dann bin ich wieder da :blush:

c_hoch_b

@justr gut zu Lesen. Der Umzug von DeConz zum Zigbee wird mein UrlaubsProjekt :-)
Ich habe ja die Hoffnung, dass die mit dem Stick verbundenen Geräte automatisch vom Zigbee-Adapter erkannt werden...?
Wenn nicht, wird das viel Arbeit.

Naja, für uns SmartHome-Nerds liegt die Frusttolleranz ja höher ;-) - nur nicht bei meiner besseren hälfte :-)

justr

@c_hoch_b Viel Erfolg! Ich musste die Devices leider neu anlernen. Evtl. hatte ich aber zu viel rumprobiert und dabei die Config verloren. Allerdings verliere ich alle paar Tage (einmal beim Einrichten und dann noch einmal in den letzten 10 Tagen) die Verbindung zum Conbee ohne Info-, Warn- oder Fehlermeldung. Auch die Instanz bleibt grün. Nach einem Restart der Instanz läuft aber alles wieder. Wenn es weiterhin passiert, werde ich mir wohl ein kleines Restart-Skript schreiben, welches triggert, wenn einer der Timestamps für die "link_quality" der Devices seit mehr als einer Stunde nicht mehr aktualisiert wurde. Wenn es aber immer erst nach mehreren Tagen passiert, reicht auch ein Auto-Restart jede Nacht. Werde es weiter beobachten...

c_hoch_b

@justr danke für die Info und Hinweis! Dann verzweifle ich nicht gleich :).

Und es ist ja noch Beta, vlt. wird das Problem ja noch behoben...

Schuko80

@arteck sagte in Zigbee Adapter und Conbee Unterstützung:

@Schuko80 mit den schnippseln kann ich nix anfagen

stell mal bitte ordentliches LOG rein

vor allem was wann sich verabschiedet wenn du es nochvolziehen kannst

Da verabschiedet sich gar nichts, es läuft gar nicht erst:

Conbee wird erkannt
scannen nach Devices -> OK
Device wird richtig erkannt -> zu 90% OK, sonst noch mal löschen und neu pairen -> OK
-Status in Objekte -> availabel = true - alles andere ist leer
Steuern einer Ikea Lampe geht, wenn ich state auf true setze.

Kachel in Zigbee zeigt keine Verbindung

Log wie folgt:

zigbee.0	2020-04-29 20:00:56.192	debug	(2343) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 20:00:56.191	debug	(2343) getBinding result: []
zigbee.0	2020-04-29 20:00:55.203	debug	(2343) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 20:00:55.202	debug	(2343) getDevices result: [{"type":"device","common":{"name":"TRADFRI bulb E27 WS clear 950lm","type":"TRADFRI bulb E27 WS clear 950lm","icon":"img/ikea_bulb_E27.png"},"native":{"id":"000b57fffe2289d7
zigbee.0	2020-04-29 20:00:55.196	debug	(2343) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 20:00:55.195	debug	(2343) getBinding result: []
zigbee.0	2020-04-29 20:00:54.766	debug	(2343) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 20:00:54.766	debug	(2343) getDevices result: [{"type":"device","common":{"name":"TRADFRI bulb E27 WS clear 950lm","type":"TRADFRI bulb E27 WS clear 950lm","icon":"img/ikea_bulb_E27.png"},"native":{"id":"000b57fffe2289d7
zigbee.0	2020-04-29 20:00:54.655	debug	(2343) new device 0x000b57fffe2289d7 42472 TRADFRI bulb E27 WS clear 950lm
zigbee.0	2020-04-29 20:00:54.650	debug	(2343) New device event: {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"devic
zigbee.0	2020-04-29 20:00:54.648	info	(2343) Device '0x000b57fffe2289d7' is supported, identified as: IKEA TRADFRI LED bulb E26/E27 950 lumen, dimmable, white spectrum, clear (LED1546G12)
zigbee.0	2020-04-29 20:00:54.648	info	(2343) Successfully interviewed '0x000b57fffe2289d7', device has succesfully been paired
zigbee.0	2020-04-29 20:00:54.647	debug	(2343) handleDeviceInterview. {"status":"successful","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID"
zigbee.0	2020-04-29 20:00:54.485	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:54.484	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"swBuildId":"2.3.007"}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:54.483	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:54.342	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:54.341	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"dateCode":"20190520"}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:54.339	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:54.183	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:54.182	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"hwVersion":1}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:54.179	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:54.038	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:54.037	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"stackVersion":98}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:54.035	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:53.877	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:53.877	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"appVersion":33}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:53.875	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:53.735	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:53.734	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"zclVersion":3}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:53.731	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:53.589	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:53.588	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"powerSource":1}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:53.587	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:53.430	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:53.429	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"manufacturerName":"IKEA of Sweden"}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:53.427	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:53.301	debug	(2343) Wrong device 000b57fffe2289d7 null
zigbee.0	2020-04-29 20:00:53.294	debug	(2343) Publish available for 0x000b57fffe2289d7 = true
zigbee.0	2020-04-29 20:00:53.291	debug	(2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260
zigbee.0	2020-04-29 20:00:53.289	debug	(2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"modelId":"TRADFRI bulb E27 WS clear 950lm"}' from endpoint 1 with groupID null
zigbee.0	2020-04-29 20:00:53.285	debug	(2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de
zigbee.0	2020-04-29 20:00:27.341	debug	(2343) User stateChange zigbee.0.info.pairingMode {"val":false,"ack":false,"ts":1588183227336,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1588182011624}
zigbee.0	2020-04-29 20:00:27.335	info	(2343) Zigbee: stop joining
zigbee.0	2020-04-29 20:00:10.650	debug	(2343) Failed to get map: "TypeError: Cannot read property 'stack' of undefined\n at ZigbeeController.getMap (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:536:115)"
zigbee.0	2020-04-29 19:59:51.834	info	(2343) Starting interview of '0x000b57fffe2289d7'
zigbee.0	2020-04-29 19:59:51.831	debug	(2343) handleDeviceInterview. {"status":"started","device":{"ID":3,"_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_endpoints":[],"_interviewCompleted":false,"_interviewing":false,"meta":{},
zigbee.0	2020-04-29 19:59:51.830	debug	(2343) handleDeviceJoined. {"device":{"ID":3,"_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_endpoints":[],"_interviewCompleted":false,"_interviewing":false,"meta":{},"_lastSeen":null}}
zigbee.0	2020-04-29 19:59:25.996	debug	(2343) sendTo "letsPairing" to system.adapter.admin.0 from system.adapter.zigbee.0: Start pairing!
zigbee.0	2020-04-29 19:59:25.996	info	(2343) Zigbee: allowing new devices to join.
zigbee.0	2020-04-29 19:59:10.534	debug	(2343) LQI succeeded for 'Coordinator'
zigbee.0	2020-04-29 19:59:09.477	debug	(2343) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:59:09.476	debug	(2343) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyS0"},{"comName":"/dev/ttyS1"},{"comName":"/dev/ttyS10"},{"comName":"/dev/ttyS11"},{"comName":"/dev/ttyS
zigbee.0	2020-04-29 19:59:09.455	debug	(2343) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:59:09.454	debug	(2343) getBinding result: []
zigbee.0	2020-04-29 19:59:09.330	debug	(2343) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:59:09.330	debug	(2343) getDevices result: [{"_id":"0x00212effff00b043","icon":"img/unknown.png","paired":true,"info":{"type":"device","device":{"ID":1,"_type":"Coordinator","_ieeeAddr":"0x00212effff00b043","_networkA
zigbee.0	2020-04-29 19:59:09.285	debug	(2343) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:59:09.285	debug	(2343) getGroups result: {}
zigbee.0	2020-04-29 19:59:09.280	debug	(2343) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:59:01.750	debug	(2343) User stateChange zigbee.0.info.pairingMode {"val":false,"ack":false,"ts":1588183141743,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1588182011624}
zigbee.0	2020-04-29 19:59:01.742	info	(2343) Zigbee: stop joining
zigbee.0	2020-04-29 19:58:59.628	debug	(2343) Failed to get map: "TypeError: Cannot read property 'stack' of undefined\n at ZigbeeController.getMap (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:536:115)"
zigbee.0	2020-04-29 19:58:00.435	debug	(2343) sendTo "letsPairing" to system.adapter.admin.0 from system.adapter.zigbee.0: Start pairing!
zigbee.0	2020-04-29 19:58:00.433	info	(2343) Zigbee: allowing new devices to join.
zigbee.0	2020-04-29 19:57:59.379	debug	(2343) LQI succeeded for 'Coordinator'
zigbee.0	2020-04-29 19:57:58.353	debug	(2343) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:57:58.352	debug	(2343) getBinding result: []
zigbee.0	2020-04-29 19:57:58.301	debug	(2343) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:57:58.300	debug	(2343) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyS0"},{"comName":"/dev/ttyS1"},{"comName":"/dev/ttyS10"},{"comName":"/dev/ttyS11"},{"comName":"/dev/ttyS
zigbee.0	2020-04-29 19:57:58.184	debug	(2343) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:57:58.183	debug	(2343) getDevices result: [{"_id":"0x00212effff00b043","icon":"img/unknown.png","paired":true,"info":{"type":"device","device":{"ID":1,"_type":"Coordinator","_ieeeAddr":"0x00212effff00b043","_networkA
zigbee.0	2020-04-29 19:57:58.130	debug	(2343) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:57:58.130	debug	(2343) getGroups result: {}
zigbee.0	2020-04-29 19:57:58.120	debug	(2343) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0
zigbee.0	2020-04-29 19:57:41.990	info	(2343) Zigbee started

MartinMuc

@MartinMuc said in Zigbee Adapter und Conbee Unterstützung:

Meine Hue Lampen funktionieren einwandfrei mit dem ConbeeII, ich habe allerdings Probleme mit den HUE Bewegungsmeldern und Schaltern.

Beim Bewegungsmelder bekomme ich beim anlernen folgenden Fehler, das hat zur folge das er zwar angezegit wird, aber ich keine Daten empfange. Selbst PRoblem besteht bei dem Dimmerschalter.

Hat jemand eine Idee was hier krumm sein könnte ? Version ist die 1.1.0.0

Danke
Martin

zigbee.0	2020-04-17 13:54:02.203	error	at Object.delayAction [as action] (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:360:69))
zigbee.0	2020-04-17 13:54:02.203	error	(1525) Failed to do action 0x0017880110486638 RWL021, attempt 2 (TypeError: Cannot read property 'stack' of undefined
zigbee.0	2020-04-17 13:54:01.203	error	at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:6:65))
zigbee.0	2020-04-17 13:54:01.203	error	at Generator.throw (<anonymous>)
zigbee.0	2020-04-17 13:54:01.203	error	at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:244:23)
zigbee.0	2020-04-17 13:54:01.203	error	(1525) Failed to configure 0x0017880110486638 RWL021, attempt NaN (Error: Bind 0x0017880110486638/1 genLevelCtrl from '0x00212effff054b00/1' failed (undefined)
zigbee.0	2020-04-17 13:53:01.239	info	(1525) Do action on 0x0017880110486638 RWL021
zigbee.0	2020-04-17 13:53:01.239	info	(1525) Do action succesfully 0x0017880110486638 RWL021
zigbee.0	2020-04-17 13:53:00.638	info	(1525) Do action on 0x0017880110486638 RWL021
zigbee.0	2020-04-17 13:53:00.637	info	(1525) Configuring 0x0017880110486638 RWL021
zigbee.0	2020-04-17 13:46:26.582	info	(1525) Zigbee: stop joining
zigbee.0	2020-04-17 13:45:59.447	error	at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
zigbee.0	2020-04-17 13:45:59.447	error	at Generator.next (<anonymous>)
zigbee.0	2020-04-17 13:45:59.447	error	at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
zigbee.0	2020-04-17 13:45:59.447	error	(1525) Failed to configure 0x0017880102006d0c SML001, attempt 1 (Error: ConfigureReporting 0x0017880102006d0c/2 genPowerCfg([{"attribute":"batteryPercentageRemaining","minimumReportInterval":3600,"ma
zigbee.0	2020-04-17 13:45:56.849	info	(1525) Configuring 0x0017880102006d0c SML001
zigbee.0	2020-04-17 13:45:56.847	info	(1525) Device '0x0017880102006d0c' is supported, identified as: Philips Hue motion sensor (9290012607)
zigbee.0	2020-04-17 13:45:56.846	info	(1525) Successfully interviewed '0x0017880102006d0c', device has succesfully been paired
zigbee.0	2020-04-17 13:45:48.425	info	(1525) Starting interview of '0x0017880102006d0c'
Pairing time left: 27
Error: Failed to configure 0x0017880102006d0c SML001, attempt 1 (Error: ConfigureReporting 0x0017880102006d0c/2 genPowerCfg([{"attribute":"batteryPercentageRemaining","minimumReportInterval":3600,"maximumReportInterval":62000,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (TypeError: payload is not iterable)
    at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
    at Generator.next (<anonymous>)
    at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)). undefined
Pairing time left: 28
Pairing time left: 29
New device joined '0x0017880102006d0c' model SML001
Interview successful: {"friendly_name":"0x0017880102006d0c","model":"9290012607","vendor":"Philips","description":"Hue motion sensor","supported":true}
Pairing time left: 30
Pairing time left: 31
Pairing time left: 32
Pairing time left: 33
Pairing time left: 34
Pairing time left: 35
Pairing time left: 36
Pairing time left: 37
Pairing time left: 38
Interview started: 0x0017880102006d0c

Niemand eine Idee ? Bastle heute noch ein bisschen wenn es dann nicht klappt muss ich die alte Huebridge ausgraben und die einbinden (was ich eigentlich vermeiden wollte)

Plasmachef

@Plasmachef sagte in Zigbee Adapter und Conbee Unterstützung:

@Glasfaser... so... habe für Samstag das Teil bestellt... sollte der Fehler wieder auftreten, was ich vermute, dann bin ich wieder da :blush:

Hallo die Zweite,

jetzt mit anderer Hardware und dem SELBEN Problem:

Bin hier grad am Testen und versuche meinen Raspi Pi 4 mit Conbee II und dem Danalock zusammen zubringen.

Conbee II eingesteckt
Zigbee über Katze geladen (Version 1.1.1), Instanz angelegt und die Hardware ausgewählt
--> Instanz grün 🙂

Instanz und Danalock V3 auf pairing ... jetzt kommts:

2020-05-02 15:17:59.402 - info: zigbee.0 (10320) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2
2020-05-02 15:17:59.437 - info: zigbee.0 (10320) Starting Zigbee...
2020-05-02 15:17:59.857 - info: zigbee.0 (10320) Coordinator firmware version: {"type":"ConBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":74,"maintrel":0,"revision":"0x264a0700"}}
2020-05-02 15:18:00.066 - info: zigbee.0 (10320) Unable to disable LED, unsupported function.
2020-05-02 15:18:00.067 - info: zigbee.0 (10320) --> transmitPower : normal
2020-05-02 15:18:00.069 - info: zigbee.0 (10320) Unable to set transmit power, unsupported function.
2020-05-02 15:18:00.071 - info: zigbee.0 (10320) Currently no devices.
2020-05-02 15:18:00.072 - info: zigbee.0 (10320) Zigbee started
2020-05-02 15:19:23.143 - info: zigbee.0 (10320) Zigbee: allowing new devices to join.
2020-05-02 15:19:31.554 - info: zigbee.0 (10320) Starting interview of '0x000b57fffe46ebec'
2020-05-02 15:19:43.707 - info: zigbee.0 (10320) Successfully interviewed '0x000b57fffe46ebec', device has succesfully been paired
2020-05-02 15:19:43.708 - info: zigbee.0 (10320) Device '0x000b57fffe46ebec' is supported, identified as: Danalock BT/ZB smartlock (V3-BTZB)
2020-05-02 15:19:43.711 - info: zigbee.0 (10320) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 15:19:45.724 - error: zigbee.0 (10320) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))

Leider kann ich mit dem Teil so nichts anfangen :-(
Einige Objekte wurden angelegt, aber mehr passiert leider nicht ... kann nichts schalten oder konfigurieren ... auch das Lock gibt kein Feedback zur Instanz

Könnt ihr mir bitte helfen?

Danke und Grüße Plasma

Plasmachef

so ... jetzt wirds spannend ... es gibt noch mehr zu berichten:

ich hab dann mal bisschen mit dem Teil "gespielt" und siehe da... der Befehl lock bzw. unlock wurde akzepiert und auch korrekt quittiert.
nach restart der instanz bekam ich dann noch ein weiteres objekt dazu: available

die anderen objekte waren tot ... und auch available hat nicht wirklich sich verändert.
ich hatte mal einen verbindungsabbruch simuliert in dem in die batterien rausnahm ... seither ging gar nichts mehr.

konnte das gerät nicht löschen
pairing zählte nur noch von 5 runter statt von 60
instanz löschen und neu aufsetzen half auch nichts...er merkte sich alle allen daten :-(
-neustart von iobroker brachte auch nichts

ich lösche die instanz (zigbee.0) und legte eine neue an (zigbee.1)

hier gab es keine altlasten und das pairing klappte
man konnte wieder zugreifen auf das gerät ... sogar diesmal mit zugabe:

linkquality kam mit dazu und refreshte sich auch regelmäßig ... immer so zwischen 3 und 4 ... was das auch immer bedeutet.

nachfolgend alle logeinträge von instanz zigbee.1

2020-05-02 16:45:56.301 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 156 (156)
2020-05-02 16:45:56.302 - info: host.raspberrypi Do not restart adapter system.adapter.zigbee.0 because disabled or deleted
2020-05-02 16:46:54.917 - info: host.raspberrypi iobroker add zigbee 1 --host raspberrypi
2020-05-02 16:46:56.601 - info: host.raspberrypi iobroker host.raspberrypi create instance zigbee
2020-05-02 16:46:56.630 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.groups created
2020-05-02 16:46:56.659 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.pairingMessage created
2020-05-02 16:46:56.688 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.pairingCountdown created
2020-05-02 16:46:56.717 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.pairingMode created
2020-05-02 16:46:56.747 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.connection created
2020-05-02 16:46:56.777 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info created
2020-05-02 16:46:56.811 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.sigKill created
2020-05-02 16:46:56.844 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.eventLoopLag created
2020-05-02 16:46:56.879 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.outputCount created
2020-05-02 16:46:56.911 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.inputCount created
2020-05-02 16:46:56.943 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.uptime created
2020-05-02 16:46:56.975 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.memRss created
2020-05-02 16:46:57.007 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.memHeapTotal created
2020-05-02 16:46:57.039 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.memHeapUsed created
2020-05-02 16:46:57.070 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.cputime created
2020-05-02 16:46:57.102 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.cpu created
2020-05-02 16:46:57.137 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.compactMode created
2020-05-02 16:46:57.179 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.connected created
2020-05-02 16:46:57.222 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.alive created
2020-05-02 16:46:57.305 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1 created
2020-05-02 16:46:58.314 - info: host.raspberrypi iobroker exit 0
2020-05-02 16:46:59.830 - info: host.raspberrypi instance system.adapter.zigbee.1 started with pid 9847
2020-05-02 16:47:03.617 - info: zigbee.1 (9847) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2
2020-05-02 16:47:03.649 - error: zigbee.1 (9847) Serial port not selected! Go to settings page.
2020-05-02 16:47:03.652 - info: zigbee.1 (9847) Starting Zigbee...
2020-05-02 16:47:03.962 - error: zigbee.1 (9847) Failed to start Zigbee
2020-05-02 16:47:03.963 - error: zigbee.1 (9847) Error: No path provided and failed to auto detect path
at Function. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/adapter.js:69:27)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/adapter.js:5:58)
at processTicksAndRejections (internal/process/task_queues.js:97:5)
2020-05-02 16:47:13.966 - info: zigbee.1 (9847) Try to reconnect. 1 attempts left
2020-05-02 16:47:13.967 - info: zigbee.1 (9847) Starting Zigbee...
2020-05-02 16:47:14.172 - error: zigbee.1 (9847) Failed to start Zigbee
2020-05-02 16:47:14.173 - error: zigbee.1 (9847) Error: No path provided and failed to auto detect path
at Function. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/adapter.js:69:27)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/adapter.js:5:58)
at processTicksAndRejections (internal/process/task_queues.js:97:5)
2020-05-02 16:47:41.210 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 (force=false, process=true)
2020-05-02 16:47:41.228 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 send kill signal
2020-05-02 16:47:41.228 - info: zigbee.1 (9847) Got terminate signal TERMINATE_YOURSELF
2020-05-02 16:47:41.231 - info: zigbee.1 (9847) cleaned everything up...
2020-05-02 16:47:41.243 - error: zigbee.1 (9847) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null
at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:200:55)
at Function.byIeeeAddr (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:208:16)
at Controller.getDeviceByIeeeAddr (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:235:31)
at ZigbeeController.getDevice (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:212:30)
at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:319:30)
at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:306:24)
at processTicksAndRejections (internal/process/task_queues.js:97:5)
at async Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:334:17))
2020-05-02 16:47:41.245 - info: zigbee.1 (9847) terminating
2020-05-02 16:47:41.247 - info: zigbee.1 (9847) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2020-05-02 16:47:41.775 - info: host.raspberrypi instance system.adapter.zigbee.1 terminated with code 156 (156)
2020-05-02 16:47:43.812 - info: host.raspberrypi instance system.adapter.zigbee.1 started with pid 11027
2020-05-02 16:47:46.082 - info: zigbee.1 (11027) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2
2020-05-02 16:47:46.150 - error: zigbee.1 (11027) Serial port not selected! Go to settings page.
2020-05-02 16:47:46.155 - info: zigbee.1 (11027) Starting Zigbee...
2020-05-02 16:47:46.609 - info: zigbee.1 (11027) Coordinator firmware version: {"type":"ConBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":74,"maintrel":0,"revision":"0x264a0700"}}
2020-05-02 16:47:53.137 - info: zigbee.1 (11027) Unable to disable LED, unsupported function.
2020-05-02 16:47:53.139 - info: zigbee.1 (11027) --> transmitPower : normal
2020-05-02 16:47:53.141 - info: zigbee.1 (11027) Unable to set transmit power, unsupported function.
2020-05-02 16:47:53.144 - info: zigbee.1 (11027) Currently no devices.
2020-05-02 16:47:53.145 - info: zigbee.1 (11027) Zigbee started
2020-05-02 16:48:41.400 - info: zigbee.1 (11027) Zigbee: allowing new devices to join.
2020-05-02 16:48:54.061 - info: zigbee.1 (11027) Starting interview of '0x000b57fffe46ebec'
2020-05-02 16:49:05.697 - info: zigbee.1 (11027) Successfully interviewed '0x000b57fffe46ebec', device has succesfully been paired
2020-05-02 16:49:05.699 - info: zigbee.1 (11027) Device '0x000b57fffe46ebec' is supported, identified as: Danalock BT/ZB smartlock (V3-BTZB)
2020-05-02 16:49:05.703 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:49:07.709 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:49:25.572 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:49:27.590 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 2 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:49:28.590 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:49:30.607 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 3 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:49:31.618 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:49:33.630 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 4 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:49:34.631 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:49:36.649 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 5 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:49:43.076 - info: zigbee.1 (11027) Zigbee: stop joining
2020-05-02 16:52:52.952 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 (force=false, process=true)
2020-05-02 16:52:52.964 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 send kill signal
2020-05-02 16:52:52.965 - info: zigbee.1 (11027) Got terminate signal TERMINATE_YOURSELF
2020-05-02 16:52:52.967 - info: zigbee.1 (11027) cleaned everything up...
2020-05-02 16:52:52.970 - info: zigbee.1 (11027) Zigbee: disabling joining new devices.
2020-05-02 16:52:53.470 - info: zigbee.1 (11027) terminating
2020-05-02 16:52:53.471 - info: zigbee.1 (11027) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2020-05-02 16:52:53.970 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 killing pid 11027
2020-05-02 16:52:54.028 - info: host.raspberrypi instance system.adapter.zigbee.1 terminated with code 156 (156)
2020-05-02 16:52:55.524 - info: host.raspberrypi instance system.adapter.zigbee.1 started with pid 18536
2020-05-02 16:52:57.823 - info: zigbee.1 (18536) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2
2020-05-02 16:52:57.869 - error: zigbee.1 (18536) Serial port not selected! Go to settings page.
2020-05-02 16:52:57.873 - info: zigbee.1 (18536) Starting Zigbee...
2020-05-02 16:52:58.322 - info: zigbee.1 (18536) Coordinator firmware version: {"type":"ConBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":74,"maintrel":0,"revision":"0x264a0700"}}
2020-05-02 16:52:58.523 - info: zigbee.1 (18536) Unable to disable LED, unsupported function.
2020-05-02 16:52:58.524 - info: zigbee.1 (18536) --> transmitPower : normal
2020-05-02 16:52:58.525 - info: zigbee.1 (18536) Unable to set transmit power, unsupported function.
2020-05-02 16:52:58.530 - info: zigbee.1 (18536) Currently 1 devices are joined:
2020-05-02 16:52:58.533 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:52:58.540 - info: zigbee.1 (18536) 0x000b57fffe46ebec (addr 61935): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-05-02 16:52:58.541 - info: zigbee.1 (18536) Zigbee started
2020-05-02 16:53:02.407 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:53:30.919 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:53:33.426 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 2 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:53:47.481 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:53:49.984 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 3 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:56:02.105 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:56:07.125 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 4 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))
2020-05-02 16:56:53.605 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 16:56:57.118 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 5 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE')
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23)
at Generator.next ()
at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))

... und wieder zeigt available nicht den richtigen zustand an

hab die batterie erneut rausgenommen ... wieder kein kontakt bzw kein lock / unlock möglich
neustart der instanz bring nichts

2020-05-02 17:28:36.558 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 (force=false, process=true)
2020-05-02 17:28:36.570 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 send kill signal
2020-05-02 17:28:36.571 - info: zigbee.1 (3673) Got terminate signal TERMINATE_YOURSELF
2020-05-02 17:28:36.573 - info: zigbee.1 (3673) cleaned everything up...
2020-05-02 17:28:36.576 - info: zigbee.1 (3673) Zigbee: disabling joining new devices.
2020-05-02 17:28:37.076 - info: zigbee.1 (3673) terminating
2020-05-02 17:28:37.078 - info: zigbee.1 (3673) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2020-05-02 17:28:37.576 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 killing pid 3673
2020-05-02 17:28:37.629 - info: host.raspberrypi instance system.adapter.zigbee.1 terminated with code 156 (156)
2020-05-02 17:28:39.129 - info: host.raspberrypi instance system.adapter.zigbee.1 started with pid 5617
2020-05-02 17:28:41.476 - info: zigbee.1 (5617) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2
2020-05-02 17:28:41.510 - info: zigbee.1 (5617) Starting Zigbee...
2020-05-02 17:28:41.928 - info: zigbee.1 (5617) Coordinator firmware version: {"type":"ConBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":74,"maintrel":0,"revision":"0x264a0700"}}
2020-05-02 17:28:42.131 - info: zigbee.1 (5617) Unable to disable LED, unsupported function.
2020-05-02 17:28:42.132 - info: zigbee.1 (5617) --> transmitPower : normal
2020-05-02 17:28:42.134 - info: zigbee.1 (5617) Unable to set transmit power, unsupported function.
2020-05-02 17:28:42.142 - info: zigbee.1 (5617) Currently 1 devices are joined:
2020-05-02 17:28:42.148 - info: zigbee.1 (5617) Configuring 0x000b57fffe46ebec V3-BTZB
2020-05-02 17:28:42.162 - info: zigbee.1 (5617) 0x000b57fffe46ebec (addr 61935): V3-BTZB - Danalock BT/ZB smartlock (EndDevice)
2020-05-02 17:28:42.164 - info: zigbee.1 (5617) Zigbee started
2020-05-02 17:29:42.783 - error: zigbee.1 (5617) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe46ebec/1 closuresDoorLock from '0x00212effff05994f/1' failed (undefined)
at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:244:23)
at Generator.throw ()
at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:6:65))

das gerät scheint zwar kontakt zu haben, aber kommunikation ist nicht möglich

wieder lässt sich das Lock nicht aus der instanz löschen und beim pairing erscheint dann folgendes

2020-05-02 17:47:24.636 - info: zigbee.1 (5617) Do action on 0x000b57fffe46ebec V3-BTZB
2020-05-02 17:47:34.795 - info: zigbee.1 (5617) Do action on 0x000b57fffe46ebec V3-BTZB
2020-05-02 17:48:07.605 - info: zigbee.1 (5617) Do action on 0x000b57fffe46ebec V3-BTZB
2020-05-02 17:48:12.949 - info: zigbee.1 (5617) Zigbee: allowing new devices to join.
2020-05-02 17:48:24.967 - error: zigbee.1 (5617) Failed to do action 0x000b57fffe46ebec V3-BTZB, attempt 1 (TypeError: Cannot read property 'stack' of undefined
at Object.action (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:360:69))
2020-05-02 17:48:34.975 - error: zigbee.1 (5617) Failed to do action 0x000b57fffe46ebec V3-BTZB, attempt 1 (TypeError: Cannot read property 'stack' of undefined
at Object.action (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:360:69))
2020-05-02 17:49:07.984 - error: zigbee.1 (5617) Failed to do action 0x000b57fffe46ebec V3-BTZB, attempt 1 (TypeError: Cannot read property 'stack' of undefined
at Object.action (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:360:69))
2020-05-02 17:49:19.007 - info: zigbee.1 (5617) Zigbee: stop joining

ich hoffe sehr, dass meine ausführung helfen ... bin auch gerne bereit weitere test zu machen

danke schön

plasma :-)

arteck

@Plasmachef sagte in Zigbee Adapter und Conbee Unterstützung:

Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1

der Danalock bekommt "Failed to configure 0x000b57fffe46ebec V3-BTZB" .. ergo keine konfiguration vom Conbee...

ist ja hat beta ..

Plasmachef

@arteck sagte in Zigbee Adapter und Conbee Unterstützung:

@Plasmachef sagte in Zigbee Adapter und Conbee Unterstützung:

Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1

der Danalock bekommt "Failed to configure 0x000b57fffe46ebec V3-BTZB" .. ergo keine konfiguration vom Conbee...

ist ja hat beta ..

danke für die schnelle Antwort :-)

was heißt das jetzt für mich?
wie kann ich unterstützen / helfen? ... was braucht ihr /du?

Plasmachef

im übrigen hab ich festgestellt, dass ich die "verbrannten instanzen" zurücksetzen kann, indem ich unter /iobroker-data die verzeichnisse zigbee_0 bzw zigbee_1 entferne, nachdem ich die instanzen gelöscht hatte.

arteck

@Plasmachef ich garnix... da ich den Conbee und das Danalok nicht habe.. kann ich dir nix zu sagen.. sry

c_hoch_b

Moin,

ich habe jetzt angefangen meine Geräte zu Pairen und bei dem Hue-Dimmer-Switch bekomme ich diverse Fehlermeldungen (siehe Log) das einbinden wird aber abgeschlossen. Doch ohne funktion.
Hab auch schon mehrfach Gelöscht und neu-Gepairt, leider ohne Erfolg.


zigbee.0	2020-05-03 09:54:04.677	error	at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:6:65))
zigbee.0	2020-05-03 09:54:04.677	error	at Generator.throw (<anonymous>)
zigbee.0	2020-05-03 09:54:04.677	error	at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:244:23)
zigbee.0	2020-05-03 09:54:04.677	error	(1328) Failed to configure 0x001788010807ecb2 RWL021, attempt 1 (Error: Bind 0x001788010807ecb2/1 genOnOff from '0x00212effff048af7/1' failed

Community Forum

NEWS

Zigbee Adapter und Conbee Unterstützung

Support us

505

32.4k

81.4k

1.3m