Zigbee Adapter mit neuem Converter
-
PS: Ich hatte vor paar Tagen Node.js von 10.18.0. auf 10.18.1 geupdatet und danach "npm rebuild" gemacht. Evtl. hat es damit zu tun?
-
@Atifan
NPM rebuild ist bei einem Update innerhalb der Grundversion nicht nötig, sollte aber auch nicht schaden. -
@Asgothian sagte in Zigbee Adapter mit neuem Converter:
Außerdem wiederhole bitte die Installation, allerdings mit aktiviertem „mehr“ im installationsdialog. (Auch den Haken schließen wenn beendet) entfernen, damit du dir die log Ausgaben anschauen kannst.
Es sieht so aus als,ob etwas nicht mit installiert wurde.Das müsstest du auch noch tun.
A.
-
@Asgothian: Sorry hatte ich vergessen.
Habe jetzt den Zigbee-Adapter mehrmals deinstalliert und wieder neu installiert.
Immer das gleiche. Die Installation funktioniert.
Nach der Installation wird aber nicht automatisch eine Zigbee Instanz angelegt, ich weiß nicht ob das normal ist oder nicht?
Wenn ich dann manuell eine Zigbee Instanz hinzufüge, ab dann kommen die Fehler im Log.Hier das Log für die Installation
$ ./iobroker url "https://github.com/ioBroker/ioBroker.zigbee/tarball/master" zigbee --debug install https://github.com/ioBroker/ioBroker.zigbee/tarball/master NPM version: 6.13.4 npm install https://github.com/ioBroker/ioBroker.zigbee/tarball/master --loglevel error --prefix "/opt/iobroker" (System call) + iobroker.zigbee@1.0.0-dadded 535 packages from 396 contributors in 11.76s 21 packages are looking for funding run `npm fund` for details upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tradfri.on-off-switch.png img/tradfri.on-off-switch.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/orvibo_cr11s8uz.png img/orvibo_cr11s8uz.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lumi_remote_b286opcn01.png img/lumi_remote_b286opcn01.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lightify-b40tw.png img/lightify-b40tw.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/innr4.png img/innr4.png image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_gu10.png img/ikea_gu10.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gledopto_gu10.png img/gledopto_gu10.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/diy.png img/diy.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_plug.png img/bitron_plug.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.png img/TRADFRI.bulb.E27.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.clear.png img/TRADFRI.bulb.E27.clear.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LH-32ZB.png img/LH-32ZB.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript process exited with code 0Und hier noch das Log wenn ich eine Instanz hinzufüge. Erst danach tauchen die Fehler im Log auf.
$ ./iobroker add zigbee --host IoBroker host.IoBroker create instance zigbee host.IoBroker object zigbee.0.info.groups created host.IoBroker object zigbee.0.info.pairingMessage created host.IoBroker object zigbee.0.info.pairingCountdown created host.IoBroker object zigbee.0.info.pairingMode created host.IoBroker object zigbee.0.info.connection created host.IoBroker object zigbee.0.info created host.IoBroker object system.adapter.zigbee.0.sigKill created host.IoBroker object system.adapter.zigbee.0.eventLoopLag created host.IoBroker object system.adapter.zigbee.0.outputCount created host.IoBroker object system.adapter.zigbee.0.inputCount created host.IoBroker object system.adapter.zigbee.0.uptime created host.IoBroker object system.adapter.zigbee.0.memRss created host.IoBroker object system.adapter.zigbee.0.memHeapTotal created host.IoBroker object system.adapter.zigbee.0.memHeapUsed created host.IoBroker object system.adapter.zigbee.0.cputime created host.IoBroker object system.adapter.zigbee.0.cpu created host.IoBroker object system.adapter.zigbee.0.compactMode created host.IoBroker object system.adapter.zigbee.0.connected created host.IoBroker object system.adapter.zigbee.0.alive created host.IoBroker object system.adapter.zigbee.0 created process exited with code 0 -
@Atifan
Wo siehst du da die Fehler? -
Da bei der Installation sieht man keine Fehler.
Der Fehler kommt erst danach im Log vom IoBroker.host.IoBroker 2020-01-19 13:23:12.182 info Restart adapter system.adapter.zigbee.0 because enabled host.IoBroker 2020-01-19 13:23:12.182 error instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) host.IoBroker 2020-01-19 13:23:12.182 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3) host.IoBroker 2020-01-19 13:23:12.182 error Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12) host.IoBroker 2020-01-19 13:23:12.182 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32) host.IoBroker 2020-01-19 13:23:12.182 error Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10) host.IoBroker 2020-01-19 13:23:12.182 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30) host.IoBroker 2020-01-19 13:23:12.182 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/lib/seriallist.js:3:25) host.IoBroker 2020-01-19 13:23:12.181 error Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18) host.IoBroker 2020-01-19 13:23:12.181 error Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17) host.IoBroker 2020-01-19 13:23:12.181 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:562:25) host.IoBroker 2020-01-19 13:23:12.181 error Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15) host.IoBroker 2020-01-19 13:23:12.181 error Caught by controller[0]: Error: Cannot find module 'zigbee-herdsman/dist/adapter/serialPortUtils' host.IoBroker 2020-01-19 13:23:12.181 error Caught by controller[0]: ^ host.IoBroker 2020-01-19 13:23:12.181 error Caught by controller[0]: throw err; host.IoBroker 2020-01-19 13:23:12.181 error Caught by controller[0]: internal/modules/cjs/loader.js:638 host.IoBroker 2020-01-19 13:23:12.069 info instance system.adapter.zigbee.0 started with pid 9105 host.IoBroker 2020-01-19 13:22:42.060 info Restart adapter system.adapter.zigbee.0 because enabled host.IoBroker 2020-01-19 13:22:42.060 error instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/lib/seriallist.js:3:25) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:562:25) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15) host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: Error: Cannot find module 'zigbee-herdsman/dist/adapter/serialPortUtils' host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: ^ host.IoBroker 2020-01-19 13:22:42.060 error Caught by controller[0]: throw err; host.IoBroker 2020-01-19 13:22:42.059 error Caught by controller[0]: internal/modules/cjs/loader.js:638 host.IoBroker 2020-01-19 13:22:41.947 info instance system.adapter.zigbee.0 started with pid 8605 host.IoBroker 2020-01-19 13:22:11.940 info Restart adapter system.adapter.zigbee.0 because enabled -
@Atifan sagte in Zigbee Adapter mit neuem Converter:
serialPortUtils
Also wenn Du über Github installierst, ist es normal, dass keine Instanz angelegt wird. Muss manuell erfolgen.
Zum Fehler, da wird ja "serialPortUtils" an gemeckert. Liegt die Datei in dem Pfad /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter und wenn ja welche Recht e hast sie?
Sind eigentlich mehre und sieht bei mir so aus:
-
Hi, den Ordner "dist" gibt es bei mir garnicht.
Es gibt nur "/opt/iobroker/node_modules/zigbee-herdsman"
-
@Atifan
Genau das meckert das Log auch an, nur warum dem so ist, übersteigt meine Linux Kenntnisse.
Ich würde den Ordner "zigbee-herdsman" mal löschen und danach auch den Adapter. Den NUC neu starten ein System Update durchführen (eventuell reboot) und dann den Adapter noch mal installieren. Wenn das nicht hilft, fällt mir mangels Linux Wissen nichts mehr dazu ein. -
Hm gute Frage, da hab ich auch keine Ahnung. Mal abwarten was die Profis meinen^^
-
Habe mir Testweise mal eine neue VM erstellt, dort IoBroker neu installiert und den Zigbee-Adapter von Github installiert.
Dann kommt bei der Installation der folgende Log.
Dort wird in Zeile 5 und 6 der serialport installiert wird, das ist genau das was mir in meiner Produktivumgebung fehlt.
Wieso wird das da denn nicht gemacht, verstehe ich nicht.$ ./iobroker url "https://github.com/ioBroker/ioBroker.zigbee/tarball/master" zigbee --debug install https://github.com/ioBroker/ioBroker.zigbee/tarball/master NPM version: 6.13.4 npm install https://github.com/ioBroker/ioBroker.zigbee/tarball/master --loglevel error --prefix "/opt/iobroker" (System call) > @serialport/bindings@8.0.6 install /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild > serialport@8.0.6 postinstall /opt/iobroker/node_modules/zigbee-herdsman/node_modules/serialport> node thank-you.js [96m[1mThank you for using serialport![96m[1m[0m[96mIf you rely on this package, please consider supporting our open collective:[22m[39m> [94mhttps://opencollective.com/serialport/donate[0m + iobroker.zigbee@1.0.0-dadded 1285 packages from 821 contributors in 24.42s 22 packages are looking for funding run `npm fund` for details upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tradfri.on-off-switch.png img/tradfri.on-off-switch.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/orvibo_cr11s8uz.png img/orvibo_cr11s8uz.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lumi_remote_b286opcn01.png img/lumi_remote_b286opcn01.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lightify-b40tw.png img/lightify-b40tw.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/innr4.png img/innr4.png image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_gu10.png img/ikea_gu10.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gledopto_gu10.png img/gledopto_gu10.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/diy.png img/diy.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_plug.png img/bitron_plug.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.png img/TRADFRI.bulb.E27.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.clear.png img/TRADFRI.bulb.E27.clear.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LH-32ZB.png img/LH-32ZB.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript process exited with code 0 -
@Atifan
Weil dort das System denkt es wäre schon da, deshalb war ja auch mein Vorschlag den Ordner zu löschen.Da ist wohl was bei der Deinstallation des Adapter schief gelaufen.
-
Hi, super so hat es funktioniert!
Ich habe zuerst die vorhandene Zigbee-Instanz gelöscht, dann den Zigbee-Adapter deinstalliert.
Dann habe ich den Ordner "/opt/iobroker/node_modules/zigbee-herdsman/" gelöscht.
Dann den Zigbee-Adapter über die Katze vom Github neu installiert.
Da hat er dann das serial-Zeug installiert
-
Hm zu früh gefreut, jetzt bekomme ich noch mehr Fehler im Log
zigbee.0 2020-01-19 16:09:56.643 error (5769) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' at Znp.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-her zigbee.0 2020-01-19 16:09:56.642 error (5769) Failed to start Zigbee zigbee.0 2020-01-19 16:09:56.593 info (5769) Starting Zigbee... zigbee.0 2020-01-19 16:09:56.593 info (5769) Try to reconnect. 1 attempts left zigbee.0 2020-01-19 16:09:46.591 error at Timer.processTimers (timers.js:223:10) zigbee.0 2020-01-19 16:09:46.591 error at listOnTimeout (timers.js:263:5) zigbee.0 2020-01-19 16:09:46.591 error at tryOnTimeout (timers.js:300:5) zigbee.0 2020-01-19 16:09:46.591 error at ontimeout (timers.js:436:11) zigbee.0 2020-01-19 16:09:46.591 error at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) zigbee.0 2020-01-19 16:09:46.591 error (5769) Error: SRSP - SYS - version after 6000ms zigbee.0 2020-01-19 16:09:46.591 error (5769) Failed to start Zigbee zigbee.0 2020-01-19 16:09:39.494 info (5769) Starting Zigbee... zigbee.0 2020-01-19 16:09:39.481 info (5769) starting. Version 1.0.0-d in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1 host.IoBroker 2020-01-19 16:09:38.792 info instance system.adapter.zigbee.0 started with pid 5769 host.IoBroker 2020-01-19 16:09:36.797 info instance system.adapter.zigbee.0 terminated with code 156 (156) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[1]: (node:1836) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js proce host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[1]: (node:1836) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by r host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:7224:22) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at Zigbee.emit (events.js:198:13) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:312:41) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:277:20) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:165:42) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:179:49) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at Controller.getDevices (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:208:31) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at Function.all (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/device.js:153:16) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/device.js:133:55) host.IoBroker 2020-01-19 16:09:36.796 error Caught by controller[0]: (node:1836) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-01-19 16:09:36.289 info (1836) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-01-19 16:09:36.289 info (1836) terminating zigbee.0 2020-01-19 16:09:36.288 error at process._tickCallback (internal/process/next_tick.js:68:7)) zigbee.0 2020-01-19 16:09:36.288 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:281:33) zigbee.0 2020-01-19 16:09:36.288 error at Controller.stop (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:159:16) zigbee.0 2020-01-19 16:09:36.288 error at __awaiter (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12) zigbee.0 2020-01-19 16:09:36.288 error at new Promise (<anonymous>) zigbee.0 2020-01-19 16:09:36.288 error at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71 zigbee.0 2020-01-19 16:09:36.288 error at Generator.next (<anonymous>) zigbee.0 2020-01-19 16:09:36.288 error at Controller.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:163:49) zigbee.0 2020-01-19 16:09:36.288 error at Function.all (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/group.js:71:15) zigbee.0 2020-01-19 16:09:36.288 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/group.js:59:55) zigbee.0 2020-01-19 16:09:36.288 error (1836) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-01-19 16:09:36.288 info (1836) Zigbee: disabling joining new devices. zigbee.0 2020-01-19 16:09:36.286 info (1836) cleaned everything up... zigbee.0 2020-01-19 16:09:36.286 info (1836) Got terminate signal TERMINATE_YOURSELF host.IoBroker 2020-01-19 16:09:36.285 info stopInstance system.adapter.zigbee.0 send kill signal host.IoBroker 2020-01-19 16:09:36.284 info stopInstance system.adapter.zigbee.0 (force=false, process=true) km200.0 2020-01-19 16:07:06.819 info (991) Adapter km200 initialization finished with 96 states. zigbee.0 2020-01-19 16:06:58.700 error at binding.open.then.err (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12) zigbee.0 2020-01-19 16:06:58.700 error at SerialPort._error (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-01-19 16:06:58.700 error at SerialPort.serialPort.open (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-01-19 16:06:58.700 error at __awaiter (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-01-19 16:06:58.700 error at new Promise (<anonymous>) zigbee.0 2020-01-19 16:06:58.700 error at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-01-19 16:06:58.700 error at Generator.next (<anonymous>) zigbee.0 2020-01-19 16:06:58.700 error at Znp.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-01-19 16:06:58.700 error (1836) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-01-19 16:06:58.700 error (1836) Failed to start Zigbee zigbee.0 2020-01-19 16:06:58.629 info (1836) Starting Zigbee... zigbee.0 2020-01-19 16:06:58.629 info (1836) Try to reconnect. 1 attempts left km200.0 2020-01-19 16:06:53.256 info (991) Slow Interval=6 hours, Slow-List: km200.0 2020-01-19 16:06:53.256 info (991) Fast Interval=1 min, Fast-List: dhwCircuits.dhw1.actualTemp,heatSources.actualModulation,heatSources.actualPower,heatSources.hs1.actualModulation,heatSources.hs1.actualPower,heatingCircuits.hc1 km200.0 2020-01-19 16:06:53.255 info (991) Interval=15 min, Norm-list: dhwCircuits.dhw1.charge,dhwCircuits.dhw1.chargeDuration,dhwCircuits.dhw1.currentSetpoint,dhwCircuits.dhw1.holidayMode.activated,dhwCircuits.dhw1.operationMode,dhwCir km200.0 2020-01-19 16:06:53.253 info (991) KM200 found 96 states, get their values now. history.0 2020-01-19 16:06:51.867 info (566) enabled logging of km200.0.dhwCircuits.dhw1.actualTemp, Alias=false km200.0 2020-01-19 16:06:51.863 info (991) Services found: 100 zigbee.0 2020-01-19 16:06:48.628 error at Timer.processTimers (timers.js:223:10) zigbee.0 2020-01-19 16:06:48.628 error at listOnTimeout (timers.js:263:5) zigbee.0 2020-01-19 16:06:48.628 error at tryOnTimeout (timers.js:300:5) zigbee.0 2020-01-19 16:06:48.628 error at ontimeout (timers.js:436:11) zigbee.0 2020-01-19 16:06:48.628 error at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) zigbee.0 2020-01-19 16:06:48.628 error (1836) Error: SRSP - SYS - version after 6000ms zigbee.0 2020-01-19 16:06:48.628 error (1836) Failed to start Zigbee zigbee.0 2020-01-19 16:06:41.496 info (1836) Starting Zigbee... zigbee.0 2020-01-19 16:06:41.484 info (1836) starting. Version 1.0.0-d in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1 -
@arteck
Ich habe seit gestern den cc2538 + cc2592 im Einsatz. Leider bekomme ich in der Netzwerkkarte die Werte zwischen den Geräten nicht dargestellt. Steht immer "0 (off)". Habe die Version 1.0.0-c im Einsatz. Eine Idee?
Grundsätzlich haben bei mir die Werte in der Netzwerkkarte und die Werte in den Objekten nie über ein gestimmt (nicht mal annähernd) war aber trotzdem immer ganz nett zum Einschätzen.`Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20190523}} -
Also irgendwas ist da mit dem Installer glaube ich nicht in Ordnung.
Ich habe ein komplett neues System aufgesetzt.
Dann mein Backup wiederhergestellt -> dabei wurde Zigbee 0.11.5 installiert.
Dann habe ich Zigbee deinstalliert und über Github die aktuelle 1.0.0-d installiert, und jetzt habe ich schon wieder die gleichen Fehler wie heute Mittag.zigbee.0 2020-01-19 18:26:44.753 error at binding.open.then.err (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12) zigbee.0 2020-01-19 18:26:44.753 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-01-19 18:26:44.753 error at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-01-19 18:26:44.753 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-01-19 18:26:44.753 error at new Promise (<anonymous>) zigbee.0 2020-01-19 18:26:44.753 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-01-19 18:26:44.753 error at Generator.next (<anonymous>) zigbee.0 2020-01-19 18:26:44.753 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-01-19 18:26:44.753 error (19809) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-01-19 18:26:44.752 error (19809) Failed to start Zigbee zigbee.0 2020-01-19 18:26:44.692 info (19809) Starting Zigbee... zigbee.0 2020-01-19 18:26:44.691 info (19809) Try to reconnect. 1 attempts left zigbee.0 2020-01-19 18:26:34.690 error at Timer.processTimers (timers.js:223:10) zigbee.0 2020-01-19 18:26:34.690 error at listOnTimeout (timers.js:263:5) zigbee.0 2020-01-19 18:26:34.690 error at tryOnTimeout (timers.js:300:5) zigbee.0 2020-01-19 18:26:34.690 error at ontimeout (timers.js:436:11) zigbee.0 2020-01-19 18:26:34.690 error at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) zigbee.0 2020-01-19 18:26:34.690 error (19809) Error: SRSP - SYS - version after 6000ms zigbee.0 2020-01-19 18:26:34.690 error (19809) Failed to start Zigbee zigbee.0 2020-01-19 18:26:27.589 info (19809) Starting Zigbee... zigbee.0 2020-01-19 18:26:27.578 info (19809) starting. Version 1.0.0-d in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1 host.iobroker 2020-01-19 18:26:26.417 info instance system.adapter.zigbee.0 started with pid 19809 host.iobroker 2020-01-19 18:26:24.423 info instance system.adapter.zigbee.0 terminated with code 156 (156) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[1]: (node:18022) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js proc host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[1]: (node:18022) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:7224:22) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at Zigbee.emit (events.js:198:13) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:312:41) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:277:20) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:165:42) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:179:49) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:208:31) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:153:16) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:133:55) host.iobroker 2020-01-19 18:26:24.422 error Caught by controller[0]: (node:18022) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-01-19 18:26:23.914 info (18022) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-01-19 18:26:23.914 info (18022) terminating zigbee.0 2020-01-19 18:26:23.913 error at process._tickCallback (internal/process/next_tick.js:68:7)) zigbee.0 2020-01-19 18:26:23.913 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:281:33) zigbee.0 2020-01-19 18:26:23.913 error at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:159:16) zigbee.0 2020-01-19 18:26:23.913 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12) zigbee.0 2020-01-19 18:26:23.913 error at new Promise (<anonymous>) zigbee.0 2020-01-19 18:26:23.913 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71 zigbee.0 2020-01-19 18:26:23.913 error at Generator.next (<anonymous>) zigbee.0 2020-01-19 18:26:23.913 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:163:49) zigbee.0 2020-01-19 18:26:23.913 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:71:15) zigbee.0 2020-01-19 18:26:23.913 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:59:55) zigbee.0 2020-01-19 18:26:23.913 error (18022) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-01-19 18:26:23.913 info (18022) Zigbee: disabling joining new devices. zigbee.0 2020-01-19 18:26:23.911 info (18022) cleaned everything up... zigbee.0 2020-01-19 18:26:23.911 info (18022) Got terminate signal TERMINATE_YOURSELF host.iobroker 2020-01-19 18:26:23.909 info stopInstance system.adapter.zigbee.0 send kill signal host.iobroker 2020-01-19 18:26:23.909 info stopInstance system.adapter.zigbee.0 (force=false, process=true) tankerkoenig.0 2020-01-19 18:25:18.265 info (11915) Reading data from tankerkoenig ... zigbee.0 2020-01-19 18:25:15.346 error at binding.open.then.err (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12) zigbee.0 2020-01-19 18:25:15.346 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-01-19 18:25:15.346 error at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-01-19 18:25:15.346 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-01-19 18:25:15.346 error at new Promise (<anonymous>) zigbee.0 2020-01-19 18:25:15.346 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-01-19 18:25:15.346 error at Generator.next (<anonymous>) zigbee.0 2020-01-19 18:25:15.346 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-01-19 18:25:15.346 error (18022) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-01-19 18:25:15.345 error (18022) Failed to start Zigbee zigbee.0 2020-01-19 18:25:15.287 info (18022) Starting Zigbee... zigbee.0 2020-01-19 18:25:15.286 info (18022) Try to reconnect. 1 attempts left zigbee.0 2020-01-19 18:25:05.285 error at Timer.processTimers (timers.js:223:10) zigbee.0 2020-01-19 18:25:05.285 error at listOnTimeout (timers.js:263:5) zigbee.0 2020-01-19 18:25:05.285 error at tryOnTimeout (timers.js:300:5) zigbee.0 2020-01-19 18:25:05.285 error at ontimeout (timers.js:436:11) zigbee.0 2020-01-19 18:25:05.285 error at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) zigbee.0 2020-01-19 18:25:05.285 error (18022) Error: SRSP - SYS - version after 6000ms zigbee.0 2020-01-19 18:25:05.285 error (18022) Failed to start Zigbee zigbee.0 2020-01-19 18:24:58.188 info (18022) Starting Zigbee... zigbee.0 2020-01-19 18:24:58.186 error (18022) Serial port not selected! Go to settings page. zigbee.0 2020-01-19 18:24:58.177 info (18022) starting. Version 1.0.0-d in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1 host.iobroker 2020-01-19 18:24:57.111 info instance system.adapter.zigbee.0 started with pid 18022 host.iobroker 2020-01-19 18:24:55.609 info iobroker exit 0 -
@Atifan
1.0.0-d ? Bei mir steht noch c im Änderungsprotokoll, nicht dass das ne nicht fertige Version ist.
Da müsste @arteck was zu sagen.
-
Ich habe mir einen Philips Outdoor BW zugelegt. Gerstern habe ich ihn ohne Probleme angemeldet (cc1352p2 mit Adapter 1.0.0-c). Die Werte in Objekte hat er auch schön eingetragen....genau ein paar Minuten. Dann ging gar nichts mehr.
Habe zig mal probiert ihn neu anzulernen., cc1352p2 abziehen, Adapterneustart usw. Nichts mehr zu machen...er konfiguriert sich einfach nicht mehr. Zurückgesetzt (habe ich ihn auch schon einige mal.
In der Geräteübersicht bekomme ich ihn nicht mehr gelöscht. Nach den Anlernversuchen ist nun auch noch eine "undefined" Kachel erschienen, die ich nicht zuordnen kann und vorher nicht da war. Weiß jemand Rat?
2020-01-19 18:24:28.650 - debug: zigbee.0 (3900) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 2020-01-19 18:24:28.800 - debug: zigbee.0 (3900) LQI succeeded for 'Coordinator' 2020-01-19 18:24:28.811 - debug: zigbee.0 (3900) Routing for 'Coordinator': {"table":[{"destinationAddress":64286,"status":"DISCOVERY_FAILED","nextHop":65534},{"destinationAddress":22913,"status":"DISCOVERY_FAILED","nextHop":65534},{"destinationAddress":35530,"status":"DISCOVERY_FAILED","nextHop":65534},{"destinationAddress":39560,"status":"ACTIVE","nextHop":39560}]} 2020-01-19 18:24:28.811 - debug: zigbee.0 (3900) Routing table succeeded for 'Coordinator' 2020-01-19 18:24:29.805 - debug: zigbee.0 (3900) LQI succeeded for '0x7cb03eaa00acad07' 2020-01-19 18:24:30.338 - debug: zigbee.0 (3900) getBinding result: [] 2020-01-19 18:24:30.339 - debug: zigbee.0 (3900) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0 2020-01-19 18:24:39.807 - debug: zigbee.0 (3900) Failed to execute routing table for '0x7cb03eaa00acad07'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)" 2020-01-19 18:24:39.807 - debug: zigbee.0 (3900) Routing for '0x7cb03eaa00acad07': {"neighbors":[{"linkquality":0,"networkAddress":39560,"ieeeAddr":"0x7cb03eaa0a07b6c8","relationship":2,"depth":1},{"linkquality":0,"networkAddress":55532,"ieeeAddr":"0x7cb03eaa0a016776","relationship":2,"depth":1},{"linkquality":0,"networkAddress":5135,"ieeeAddr":"0x84182600000e8d75","relationship":2,"depth":1},{"linkquality":0,"networkAddress":24390,"ieeeAddr":"0x00158d0002c63f59","relationship":2,"depth":1},{"linkquality":0,"networkAddress":35392,"ieeeAddr":"0xccccccfffe9734b3","relationship":1,"depth":1},{"linkquality":0,"networkAddress":10321,"ieeeAddr":"0x7cb03eaa0a050960","relationship":2,"depth":1},{"linkquality":0,"networkAddress":18295,"ieeeAddr":"0x7cb03eaa0a07cf0e","relationship":2,"depth":1},{"linkquality":0,"networkAddress":31563,"ieeeAddr":"0x841826000010673d","relationship":2,"depth":1},{"linkquality":0,"networkAddress":21019,"ieeeAddr":"0x7cb03eaa0a036286","relationship":2,"depth":1},{"linkquality":0,"networkAddress":64286,"ieeeAddr":"0x84182600000e47bf","relationship":2,"depth":1},{"linkquality":0,"networkAddress":52037,"ieeeAddr":"0x00158d00028f7b08","relationship":1,"depth":1},{"linkquality":0,"networkAddress":49822,"ieeeAddr":"0x00158d0002a523d7","relationship":1,"depth":1},{"linkquality":0,"networkAddress":610,"ieeeAddr":"0x7cb03eaa0a07b27e","relationship":2,"depth":1},{"linkquality":0,"networkAddress":145,"ieeeAddr":"0x00158d0002238339","relationship":1,"depth":1},{"linkquality":0,"networkAddress":26364,"ieeeAddr":"0x00158d0002c8ca73","relationship":1,"depth":1}]} 2020-01-19 18:24:39.808 - debug: zigbee.0 (3900) Routing table succeeded for '0x7cb03eaa00acad07' 2020-01-19 18:24:40.353 - debug: zigbee.0 (3900) LQI succeeded for '0x84182600000e47bf' 2020-01-19 18:24:50.358 - debug: zigbee.0 (3900) Failed to execute routing table for '0x84182600000e47bf'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)" 2020-01-19 18:24:50.359 - debug: zigbee.0 (3900) Routing for '0x84182600000e47bf': {"neighbors":[{"linkquality":0,"networkAddress":10321,"ieeeAddr":"0x7cb03eaa0a050960","relationship":2,"depth":1},{"linkquality":0,"networkAddress":0,"ieeeAddr":"0x00124b001ca60d31","relationship":0,"depth":1},{"linkquality":0,"networkAddress":31563,"ieeeAddr":"0x841826000010673d","relationship":2,"depth":1},{"linkquality":0,"networkAddress":10895,"ieeeAddr":"0x00158d0003e748be","relationship":1,"depth":1},{"linkquality":0,"networkAddress":55532,"ieeeAddr":"0x7cb03eaa0a016776","relationship":2,"depth":1},{"linkquality":0,"networkAddress":24390,"ieeeAddr":"0x00158d0002c63f59","relationship":2,"depth":1},{"linkquality":0,"networkAddress":18295,"ieeeAddr":"0x7cb03eaa0a07cf0e","relationship":2,"depth":1},{"linkquality":0,"networkAddress":21019,"ieeeAddr":"0x7cb03eaa0a036286","relationship":2,"depth":1},{"linkquality":0,"networkAddress":610,"ieeeAddr":"0x7cb03eaa0a07b27e","relationship":2,"depth":1},{"linkquality":0,"networkAddress":5135,"ieeeAddr":"0x84182600000e8d75","relationship":2,"depth":1},{"linkquality":0,"networkAddress":39560,"ieeeAddr":"0x7cb03eaa0a07b6c8","relationship":2,"depth":1},{"linkquality":0,"networkAddress":22913,"ieeeAddr":"0x7cb03eaa00acad07","relationship":2,"depth":1}]} 2020-01-19 18:24:50.360 - debug: zigbee.0 (3900) Routing table succeeded for '0x84182600000e47bf' 2020-01-19 18:24:59.350 - debug: zigbee.0 (3900) system.adapter.admin.0: logging false 2020-01-19 18:25:00.672 - debug: zigbee.0 (3900) Failed to execute LQI for '0x841826000010673d'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)" 2020-01-19 18:25:00.673 - debug: zigbee.0 (3900) LQI succeeded for '0x841826000010673d' 2020-01-19 18:25:04.262 - info: host.IOBroker(SmartHome) stopInstance system.adapter.zigbee.0 (force=false, process=true) 2020-01-19 18:25:04.263 - info: host.IOBroker(SmartHome) stopInstance system.adapter.zigbee.0 send kill signal 2020-01-19 18:25:04.271 - info: zigbee.0 (3900) Got terminate signal TERMINATE_YOURSELF 2020-01-19 18:25:04.273 - info: zigbee.0 (3900) cleaned everything up... 2020-01-19 18:25:04.276 - info: zigbee.0 (3900) Zigbee: disabling joining new devices. 2020-01-19 18:25:04.276 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa00acad07 = false 2020-01-19 18:25:04.277 - debug: zigbee.0 (3900) Publish available for 0xccccccfffe9734b3 = false 2020-01-19 18:25:04.278 - debug: zigbee.0 (3900) Publish available for 0x84182600000e47bf = false 2020-01-19 18:25:04.279 - debug: zigbee.0 (3900) Publish available for 0x841826000010673d = false 2020-01-19 18:25:04.281 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a016776 = false 2020-01-19 18:25:04.281 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a07cf0e = false 2020-01-19 18:25:04.282 - debug: zigbee.0 (3900) Publish available for 0x84182600000e8d75 = false 2020-01-19 18:25:04.283 - debug: zigbee.0 (3900) Publish available for 0x04cf8cdf3c75b44a = false 2020-01-19 18:25:04.284 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a07b27e = false 2020-01-19 18:25:04.285 - debug: zigbee.0 (3900) Publish available for 0x00158d0002c63f59 = false 2020-01-19 18:25:04.286 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a036286 = false 2020-01-19 18:25:04.286 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a050960 = false 2020-01-19 18:25:04.287 - debug: zigbee.0 (3900) Publish available for 0x00158d000289e4c9 = false 2020-01-19 18:25:04.288 - debug: zigbee.0 (3900) Publish available for 0x00158d000255dc96 = false 2020-01-19 18:25:04.289 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a07b6c8 = false 2020-01-19 18:25:04.290 - debug: zigbee.0 (3900) Publish available for 0x00158d0002c8ca73 = false 2020-01-19 18:25:04.291 - debug: zigbee.0 (3900) Publish available for 0x00158d0002238339 = false 2020-01-19 18:25:04.292 - debug: zigbee.0 (3900) Publish available for 0x00158d0002a523d7 = false 2020-01-19 18:25:04.292 - debug: zigbee.0 (3900) Publish available for 0xec1bbdfffe972085 = false 2020-01-19 18:25:04.293 - debug: zigbee.0 (3900) Publish available for 0x0017880104f18654 = false 2020-01-19 18:25:04.294 - debug: zigbee.0 (3900) Publish available for 0x00158d0003e748be = false 2020-01-19 18:25:04.295 - debug: zigbee.0 (3900) Publish available for 0x00158d0002d40924 = false 2020-01-19 18:25:04.295 - debug: zigbee.0 (3900) Publish available for 0x00158d0002ca09bc = false 2020-01-19 18:25:04.296 - debug: zigbee.0 (3900) Publish available for 0x00158d00028f7b08 = false 2020-01-19 18:25:04.297 - debug: zigbee.0 (3900) Publish available for 0x00158d00028f7bcd = false 2020-01-19 18:25:04.298 - debug: zigbee.0 (3900) Publish available for 0x00124b00199448e7 = false 2020-01-19 18:25:04.298 - debug: zigbee.0 (3900) Publish available for 0x04cf8cdf3c75c2c5 = false 2020-01-19 18:25:04.299 - debug: zigbee.0 (3900) Publish available for 0x00158d00029279c0 = false 2020-01-19 18:25:04.300 - debug: zigbee.0 (3900) Publish available for 0x001788010645c3e7 = false 2020-01-19 18:25:04.564 - debug: zigbee.0 (3900) Wrong device 0017880104f18654 null 2020-01-19 18:25:04.616 - info: zigbee.0 (3900) terminating 2020-01-19 18:25:04.618 - info: zigbee.0 (3900) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2020-01-19 18:25:05.181 - info: host.IOBroker(SmartHome) instance system.adapter.zigbee.0 terminated with code 4294967196 (START_IMMEDIATELY_AFTER_STOP_HEX) 2020-01-19 18:25:06.845 - info: host.IOBroker(SmartHome) instance system.adapter.zigbee.0 started with pid 8252 2020-01-19 18:25:11.542 - info: zigbee.0 (8252) starting. Version 1.0.0-c in C:/Iobroker/SmartHome/node_modules/iobroker.zigbee, node: v10.16.3 2020-01-19 18:25:11.584 - info: zigbee.0 (8252) Starting Zigbee... 2020-01-19 18:25:13.387 - info: zigbee.0 (8252) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20191106}} 2020-01-19 18:25:13.410 - info: zigbee.0 (8252) Unable to disable LED, unsupported function. 2020-01-19 18:25:13.467 - info: zigbee.0 (8252) Currently 29 devices are joined: 2020-01-19 18:25:13.478 - info: zigbee.0 (8252) Configuring 0x001788010645c3e7 SML002 2020-01-19 18:25:13.487 - info: zigbee.0 (8252) 0x7cb03eaa00acad07 (addr 22913): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-01-19 18:25:13.489 - info: zigbee.0 (8252) 0xccccccfffe9734b3 (addr 61304): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) 2020-01-19 18:25:13.490 - info: zigbee.0 (8252) 0x84182600000e47bf (addr 64286): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-01-19 18:25:13.490 - info: zigbee.0 (8252) 0x841826000010673d (addr 31563): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-01-19 18:25:13.491 - info: zigbee.0 (8252) 0x7cb03eaa0a016776 (addr 55532): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-01-19 18:25:13.492 - info: zigbee.0 (8252) 0x7cb03eaa0a07cf0e (addr 18295): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-01-19 18:25:13.492 - info: zigbee.0 (8252) 0x84182600000e8d75 (addr 5135): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-01-19 18:25:13.493 - info: zigbee.0 (8252) 0x04cf8cdf3c75b44a (addr 48447): WXCJKG13LM - Xiaomi Aqara Opple switch 3 bands (EndDevice) 2020-01-19 18:25:13.493 - info: zigbee.0 (8252) 0x7cb03eaa0a07b27e (addr 610): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-01-19 18:25:13.494 - info: zigbee.0 (8252) 0x00158d0002c63f59 (addr 24390): ZNLDP12LM - Xiaomi Aqara smart LED bulb (Router) 2020-01-19 18:25:13.495 - info: zigbee.0 (8252) 0x7cb03eaa0a036286 (addr 21019): AC03641 - OSRAM LIGHTIFY LED Classic A60 clear (Router) 2020-01-19 18:25:13.495 - info: zigbee.0 (8252) 0x7cb03eaa0a050960 (addr 10321): AC03641 - OSRAM LIGHTIFY LED Classic A60 clear (Router) 2020-01-19 18:25:13.496 - info: zigbee.0 (8252) 0x00158d000289e4c9 (addr 9335): MFKZQ01LM - Xiaomi Mi/Aqara smart home cube (EndDevice) 2020-01-19 18:25:13.496 - info: zigbee.0 (8252) 0x00158d000255dc96 (addr 5485): WXKG02LM - Xiaomi Aqara double key wireless wall switch (EndDevice) 2020-01-19 18:25:13.497 - info: zigbee.0 (8252) 0x7cb03eaa0a07b6c8 (addr 39560): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-01-19 18:25:13.498 - info: zigbee.0 (8252) 0x00158d0002c8ca73 (addr 26364): WXKG01LM - Xiaomi MiJia wireless switch (EndDevice) 2020-01-19 18:25:13.498 - info: zigbee.0 (8252) 0x00158d0002238339 (addr 145): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) 2020-01-19 18:25:13.498 - info: zigbee.0 (8252) 0x00158d0002a523d7 (addr 49822): DJT11LM - Xiaomi Aqara vibration sensor (EndDevice) 2020-01-19 18:25:13.499 - info: zigbee.0 (8252) 0xec1bbdfffe972085 (addr 24782): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) 2020-01-19 18:25:13.499 - info: zigbee.0 (8252) 0x0017880104f18654 (addr 35530): Not supported (model undefined)(EndDevice) 2020-01-19 18:25:13.500 - info: zigbee.0 (8252) 0x00158d0003e748be (addr 10895): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) 2020-01-19 18:25:13.500 - info: zigbee.0 (8252) 0x00158d0002d40924 (addr 2026): WXKG02LM - Xiaomi Aqara double key wireless wall switch (EndDevice) 2020-01-19 18:25:13.501 - info: zigbee.0 (8252) 0x00158d0002ca09bc (addr 65376): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-01-19 18:25:13.501 - info: zigbee.0 (8252) 0x00158d00028f7b08 (addr 52037): WXKG03LM - Xiaomi Aqara single key wireless wall switch (EndDevice) 2020-01-19 18:25:13.502 - info: zigbee.0 (8252) 0x00158d00028f7bcd (addr 3601): WXKG03LM - Xiaomi Aqara single key wireless wall switch (EndDevice) 2020-01-19 18:25:13.502 - info: zigbee.0 (8252) 0x00124b00199448e7 (addr 40353): GL-C-007/GL-C-008 - Gledopto Zigbee LED controller RGB + CCT or RGBW (Router) 2020-01-19 18:25:13.503 - info: zigbee.0 (8252) 0x04cf8cdf3c75c2c5 (addr 28089): WXCJKG12LM - Xiaomi Aqara Opple switch 2 bands (EndDevice) 2020-01-19 18:25:13.503 - info: zigbee.0 (8252) 0x00158d00029279c0 (addr 61830): 50044/50045 - Paulmann SmartHome Zigbee Dimmer or LED-stripe (Router) 2020-01-19 18:25:13.504 - info: zigbee.0 (8252) 0x001788010645c3e7 (addr 44098): 9290019758 - Philips Hue motion outdoor sensor (EndDevice) 2020-01-19 18:25:13.509 - info: zigbee.0 (8252) Zigbee started 2020-01-19 18:25:18.328 - info: sonoff.0 (1196) Client [Hobbydecke] reconnected. Old secret 1579454495935_4533. New secret 1579454718288_5146 2020-01-19 18:25:23.503 - error: zigbee.0 (8252) Failed to configure 0x001788010645c3e7 SML002, attempt 1 (Error: AREQ - ZDO - bindRsp after 10000ms at Timeout.object.timer.setTimeout [as _onTimeout] (C:\Iobroker\SmartHome\node_modules\iobroker.zigbee\node_modules\zigbee-herdsman\dist\utils\waitress.js:44:24) at ontimeout (timers.js:436:11) at tryOnTimeout (timers.js:300:5) at listOnTimeout (timers.js:263:5) at Timer.processTimers (timers.js:223:10)) -
@Jan1 1.0.0-d ist die neue..
Also irgendwas ist da mit dem Installer glaube ich nicht in Ordnung.
der ist gut.. sry das ich jetzt lache aber .. egal....
Multihost ??
und hör auf irgendwelche wilden konstellationen auszuprobieren.. wenn du ein backup zurück spielst dann installiere OHNE WAS ZU LÖSCHEN aus dem GIT und gut ist..@DocGame installiere die neue Version... dann schau nochmal.. mit dem BWM..
die ? Kachel ist ein nicht erkanntes Gerät -
Ähm ich will mein System zum Laufen bekommen, deswegen habe ich verschiedene Sachen ausprobiert, leider ohne Erfolg.
Keine Ahnung woran es liegt, aber irgendwas stimmt nicht.
