UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Atifan]

@Asgothian: Sorry hatte ich vergessen.

Habe jetzt den Zigbee-Adapter mehrmals deinstalliert und wieder neu installiert.
Immer das gleiche. Die Installation funktioniert.
Nach der Installation wird aber nicht automatisch eine Zigbee Instanz angelegt, ich weiß nicht ob das normal ist oder nicht?
Wenn ich dann manuell eine Zigbee Instanz hinzufüge, ab dann kommen die Fehler im Log.

Hier das Log für die Installation

$ ./iobroker url "https://github.com/ioBroker/ioBroker.zigbee/tarball/master" zigbee --debug
install https://github.com/ioBroker/ioBroker.zigbee/tarball/master
NPM version: 6.13.4
npm install https://github.com/ioBroker/ioBroker.zigbee/tarball/master --loglevel error --prefix "/opt/iobroker" (System call)
+ iobroker.zigbee@1.0.0-dadded 535 packages from 396 contributors in 11.76s
21 packages are looking for funding  run `npm fund` for details
upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tradfri.on-off-switch.png img/tradfri.on-off-switch.png image/png
upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/orvibo_cr11s8uz.png img/orvibo_cr11s8uz.png image/png
upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lumi_remote_b286opcn01.png img/lumi_remote_b286opcn01.png image/png
upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lightify-b40tw.png img/lightify-b40tw.png image/png
upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/innr4.png img/innr4.png image/png
upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_gu10.png img/ikea_gu10.png image/png
upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gledopto_gu10.png img/gledopto_gu10.png image/png
upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/diy.png img/diy.png image/png
upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_plug.png img/bitron_plug.png image/png
upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.png img/TRADFRI.bulb.E27.png image/png
upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.clear.png img/TRADFRI.bulb.E27.clear.png image/png
upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LH-32ZB.png img/LH-32ZB.png image/png
upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png
upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png
upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png
upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png
upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png
upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png
upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png
upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript
process exited with code 0

Und hier noch das Log wenn ich eine Instanz hinzufüge. Erst danach tauchen die Fehler im Log auf.

$ ./iobroker add zigbee  --host IoBroker
host.IoBroker create instance zigbee
host.IoBroker object zigbee.0.info.groups created
host.IoBroker object zigbee.0.info.pairingMessage created
host.IoBroker object zigbee.0.info.pairingCountdown created
host.IoBroker object zigbee.0.info.pairingMode created
host.IoBroker object zigbee.0.info.connection created
host.IoBroker object zigbee.0.info created
host.IoBroker object system.adapter.zigbee.0.sigKill created
host.IoBroker object system.adapter.zigbee.0.eventLoopLag created
host.IoBroker object system.adapter.zigbee.0.outputCount created
host.IoBroker object system.adapter.zigbee.0.inputCount created
host.IoBroker object system.adapter.zigbee.0.uptime created
host.IoBroker object system.adapter.zigbee.0.memRss created
host.IoBroker object system.adapter.zigbee.0.memHeapTotal created
host.IoBroker object system.adapter.zigbee.0.memHeapUsed created
host.IoBroker object system.adapter.zigbee.0.cputime created
host.IoBroker object system.adapter.zigbee.0.cpu created
host.IoBroker object system.adapter.zigbee.0.compactMode created
host.IoBroker object system.adapter.zigbee.0.connected created
host.IoBroker object system.adapter.zigbee.0.alive created
host.IoBroker object system.adapter.zigbee.0 created
process exited with code 0

[dimaiv]

@Atifan
Wo siehst du da die Fehler?

[Atifan]

Da bei der Installation sieht man keine Fehler.
Der Fehler kommt erst danach im Log vom IoBroker.

host.IoBroker	2020-01-19 13:23:12.182	info	Restart adapter system.adapter.zigbee.0 because enabled
host.IoBroker	2020-01-19 13:23:12.182	error	instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
host.IoBroker	2020-01-19 13:23:12.182	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
host.IoBroker	2020-01-19 13:23:12.182	error	Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
host.IoBroker	2020-01-19 13:23:12.182	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
host.IoBroker	2020-01-19 13:23:12.182	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
host.IoBroker	2020-01-19 13:23:12.182	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30)
host.IoBroker	2020-01-19 13:23:12.182	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/lib/seriallist.js:3:25)
host.IoBroker	2020-01-19 13:23:12.181	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
host.IoBroker	2020-01-19 13:23:12.181	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17)
host.IoBroker	2020-01-19 13:23:12.181	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:562:25)
host.IoBroker	2020-01-19 13:23:12.181	error	Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15)
host.IoBroker	2020-01-19 13:23:12.181	error	Caught by controller[0]: Error: Cannot find module 'zigbee-herdsman/dist/adapter/serialPortUtils'
host.IoBroker	2020-01-19 13:23:12.181	error	Caught by controller[0]: ^
host.IoBroker	2020-01-19 13:23:12.181	error	Caught by controller[0]: throw err;
host.IoBroker	2020-01-19 13:23:12.181	error	Caught by controller[0]: internal/modules/cjs/loader.js:638
host.IoBroker	2020-01-19 13:23:12.069	info	instance system.adapter.zigbee.0 started with pid 9105
host.IoBroker	2020-01-19 13:22:42.060	info	Restart adapter system.adapter.zigbee.0 because enabled
host.IoBroker	2020-01-19 13:22:42.060	error	instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/lib/seriallist.js:3:25)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:562:25)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15)
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: Error: Cannot find module 'zigbee-herdsman/dist/adapter/serialPortUtils'
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: ^
host.IoBroker	2020-01-19 13:22:42.060	error	Caught by controller[0]: throw err;
host.IoBroker	2020-01-19 13:22:42.059	error	Caught by controller[0]: internal/modules/cjs/loader.js:638
host.IoBroker	2020-01-19 13:22:41.947	info	instance system.adapter.zigbee.0 started with pid 8605
host.IoBroker	2020-01-19 13:22:11.940	info	Restart adapter system.adapter.zigbee.0 because enabled

[Jan1]

@Atifan sagte in Zigbee Adapter mit neuem Converter:

serialPortUtils

Also wenn Du über Github installierst, ist es normal, dass keine Instanz angelegt wird. Muss manuell erfolgen.

Zum Fehler, da wird ja "serialPortUtils" an gemeckert. Liegt die Datei in dem Pfad /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter und wenn ja welche Recht e hast sie?

Sind eigentlich mehre und sieht bei mir so aus:

[Atifan]

Hi, den Ordner "dist" gibt es bei mir garnicht.
Es gibt nur "/opt/iobroker/node_modules/zigbee-herdsman"

[Jan1]

@Atifan
Genau das meckert das Log auch an, nur warum dem so ist, übersteigt meine Linux Kenntnisse.
Ich würde den Ordner "zigbee-herdsman" mal löschen und danach auch den Adapter. Den NUC neu starten ein System Update durchführen (eventuell reboot) und dann den Adapter noch mal installieren. Wenn das nicht hilft, fällt mir mangels Linux Wissen nichts mehr dazu ein.

[Atifan]

Hm gute Frage, da hab ich auch keine Ahnung. Mal abwarten was die Profis meinen^^

[Atifan]

Habe mir Testweise mal eine neue VM erstellt, dort IoBroker neu installiert und den Zigbee-Adapter von Github installiert.
Dann kommt bei der Installation der folgende Log.
Dort wird in Zeile 5 und 6 der serialport installiert wird, das ist genau das was mir in meiner Produktivumgebung fehlt.
Wieso wird das da denn nicht gemacht, verstehe ich nicht.

$ ./iobroker url "https://github.com/ioBroker/ioBroker.zigbee/tarball/master" zigbee --debug
install https://github.com/ioBroker/ioBroker.zigbee/tarball/master
NPM version: 6.13.4
npm install https://github.com/ioBroker/ioBroker.zigbee/tarball/master --loglevel error --prefix "/opt/iobroker" (System call)
> @serialport/bindings@8.0.6 install /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild
> serialport@8.0.6 postinstall /opt/iobroker/node_modules/zigbee-herdsman/node_modules/serialport> node thank-you.js
Thank you for using serialport!If you rely on this package, please consider supporting our open collective:> https://opencollective.com/serialport/donate
+ iobroker.zigbee@1.0.0-dadded 1285 packages from 821 contributors in 24.42s
22 packages are looking for funding  run `npm fund` for details
upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tradfri.on-off-switch.png img/tradfri.on-off-switch.png image/png
upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/orvibo_cr11s8uz.png img/orvibo_cr11s8uz.png image/png
upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lumi_remote_b286opcn01.png img/lumi_remote_b286opcn01.png image/png
upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lightify-b40tw.png img/lightify-b40tw.png image/png
upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/innr4.png img/innr4.png image/png
upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_gu10.png img/ikea_gu10.png image/png
upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gledopto_gu10.png img/gledopto_gu10.png image/png
upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/diy.png img/diy.png image/png
upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_plug.png img/bitron_plug.png image/png
upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.png img/TRADFRI.bulb.E27.png image/png
upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TRADFRI.bulb.E27.clear.png img/TRADFRI.bulb.E27.clear.png image/png
upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LH-32ZB.png img/LH-32ZB.png image/png
upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png
upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png
upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png
upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png
upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png
upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png
upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png
upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript
process exited with code 0

[Jan1]

@Atifan
Weil dort das System denkt es wäre schon da, deshalb war ja auch mein Vorschlag den Ordner zu löschen.

Da ist wohl was bei der Deinstallation des Adapter schief gelaufen.

[Atifan]

Hi, super so hat es funktioniert!
Ich habe zuerst die vorhandene Zigbee-Instanz gelöscht, dann den Zigbee-Adapter deinstalliert.
Dann habe ich den Ordner "/opt/iobroker/node_modules/zigbee-herdsman/" gelöscht.
Dann den Zigbee-Adapter über die Katze vom Github neu installiert.
Da hat er dann das serial-Zeug installiert :)

[Atifan]

Hm zu früh gefreut, jetzt bekomme ich noch mehr Fehler im Log :(

zigbee.0	2020-01-19 16:09:56.643	error	(5769) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' at Znp.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-her
zigbee.0	2020-01-19 16:09:56.642	error	(5769) Failed to start Zigbee
zigbee.0	2020-01-19 16:09:56.593	info	(5769) Starting Zigbee...
zigbee.0	2020-01-19 16:09:56.593	info	(5769) Try to reconnect. 1 attempts left
zigbee.0	2020-01-19 16:09:46.591	error	at Timer.processTimers (timers.js:223:10)
zigbee.0	2020-01-19 16:09:46.591	error	at listOnTimeout (timers.js:263:5)
zigbee.0	2020-01-19 16:09:46.591	error	at tryOnTimeout (timers.js:300:5)
zigbee.0	2020-01-19 16:09:46.591	error	at ontimeout (timers.js:436:11)
zigbee.0	2020-01-19 16:09:46.591	error	at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24)
zigbee.0	2020-01-19 16:09:46.591	error	(5769) Error: SRSP - SYS - version after 6000ms
zigbee.0	2020-01-19 16:09:46.591	error	(5769) Failed to start Zigbee
zigbee.0	2020-01-19 16:09:39.494	info	(5769) Starting Zigbee...
zigbee.0	2020-01-19 16:09:39.481	info	(5769) starting. Version 1.0.0-d in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1
host.IoBroker	2020-01-19 16:09:38.792	info	instance system.adapter.zigbee.0 started with pid 5769
host.IoBroker	2020-01-19 16:09:36.797	info	instance system.adapter.zigbee.0 terminated with code 156 (156)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[1]: (node:1836) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js proce
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[1]: (node:1836) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by r
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:7224:22)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at Zigbee.emit (events.js:198:13)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:312:41)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:277:20)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:165:42)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:179:49)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at Controller.getDevices (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:208:31)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at Function.all (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/device.js:153:16)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/device.js:133:55)
host.IoBroker	2020-01-19 16:09:36.796	error	Caught by controller[0]: (node:1836) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'getEntries' of null
zigbee.0	2020-01-19 16:09:36.289	info	(1836) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
zigbee.0	2020-01-19 16:09:36.289	info	(1836) terminating
zigbee.0	2020-01-19 16:09:36.288	error	at process._tickCallback (internal/process/next_tick.js:68:7))
zigbee.0	2020-01-19 16:09:36.288	error	at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:281:33)
zigbee.0	2020-01-19 16:09:36.288	error	at Controller.stop (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:159:16)
zigbee.0	2020-01-19 16:09:36.288	error	at __awaiter (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12)
zigbee.0	2020-01-19 16:09:36.288	error	at new Promise (<anonymous>)
zigbee.0	2020-01-19 16:09:36.288	error	at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71
zigbee.0	2020-01-19 16:09:36.288	error	at Generator.next (<anonymous>)
zigbee.0	2020-01-19 16:09:36.288	error	at Controller.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/controller.js:163:49)
zigbee.0	2020-01-19 16:09:36.288	error	at Function.all (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/group.js:71:15)
zigbee.0	2020-01-19 16:09:36.288	error	at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/group.js:59:55)
zigbee.0	2020-01-19 16:09:36.288	error	(1836) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null
zigbee.0	2020-01-19 16:09:36.288	info	(1836) Zigbee: disabling joining new devices.
zigbee.0	2020-01-19 16:09:36.286	info	(1836) cleaned everything up...
zigbee.0	2020-01-19 16:09:36.286	info	(1836) Got terminate signal TERMINATE_YOURSELF
host.IoBroker	2020-01-19 16:09:36.285	info	stopInstance system.adapter.zigbee.0 send kill signal
host.IoBroker	2020-01-19 16:09:36.284	info	stopInstance system.adapter.zigbee.0 (force=false, process=true)
km200.0	2020-01-19 16:07:06.819	info	(991) Adapter km200 initialization finished with 96 states.
zigbee.0	2020-01-19 16:06:58.700	error	at binding.open.then.err (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12)
zigbee.0	2020-01-19 16:06:58.700	error	at SerialPort._error (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
zigbee.0	2020-01-19 16:06:58.700	error	at SerialPort.serialPort.open (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49)
zigbee.0	2020-01-19 16:06:58.700	error	at __awaiter (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12)
zigbee.0	2020-01-19 16:06:58.700	error	at new Promise (<anonymous>)
zigbee.0	2020-01-19 16:06:58.700	error	at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71
zigbee.0	2020-01-19 16:06:58.700	error	at Generator.next (<anonymous>)
zigbee.0	2020-01-19 16:06:58.700	error	at Znp.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32)
zigbee.0	2020-01-19 16:06:58.700	error	(1836) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
zigbee.0	2020-01-19 16:06:58.700	error	(1836) Failed to start Zigbee
zigbee.0	2020-01-19 16:06:58.629	info	(1836) Starting Zigbee...
zigbee.0	2020-01-19 16:06:58.629	info	(1836) Try to reconnect. 1 attempts left
km200.0	2020-01-19 16:06:53.256	info	(991) Slow Interval=6 hours, Slow-List:
km200.0	2020-01-19 16:06:53.256	info	(991) Fast Interval=1 min, Fast-List: dhwCircuits.dhw1.actualTemp,heatSources.actualModulation,heatSources.actualPower,heatSources.hs1.actualModulation,heatSources.hs1.actualPower,heatingCircuits.hc1
km200.0	2020-01-19 16:06:53.255	info	(991) Interval=15 min, Norm-list: dhwCircuits.dhw1.charge,dhwCircuits.dhw1.chargeDuration,dhwCircuits.dhw1.currentSetpoint,dhwCircuits.dhw1.holidayMode.activated,dhwCircuits.dhw1.operationMode,dhwCir
km200.0	2020-01-19 16:06:53.253	info	(991) KM200 found 96 states, get their values now.
history.0	2020-01-19 16:06:51.867	info	(566) enabled logging of km200.0.dhwCircuits.dhw1.actualTemp, Alias=false
km200.0	2020-01-19 16:06:51.863	info	(991) Services found: 100
zigbee.0	2020-01-19 16:06:48.628	error	at Timer.processTimers (timers.js:223:10)
zigbee.0	2020-01-19 16:06:48.628	error	at listOnTimeout (timers.js:263:5)
zigbee.0	2020-01-19 16:06:48.628	error	at tryOnTimeout (timers.js:300:5)
zigbee.0	2020-01-19 16:06:48.628	error	at ontimeout (timers.js:436:11)
zigbee.0	2020-01-19 16:06:48.628	error	at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24)
zigbee.0	2020-01-19 16:06:48.628	error	(1836) Error: SRSP - SYS - version after 6000ms
zigbee.0	2020-01-19 16:06:48.628	error	(1836) Failed to start Zigbee
zigbee.0	2020-01-19 16:06:41.496	info	(1836) Starting Zigbee...
zigbee.0	2020-01-19 16:06:41.484	info	(1836) starting. Version 1.0.0-d in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1

[tazdevil20]

@arteck
Ich habe seit gestern den cc2538 + cc2592 im Einsatz. Leider bekomme ich in der Netzwerkkarte die Werte zwischen den Geräten nicht dargestellt. Steht immer "0 (off)". Habe die Version 1.0.0-c im Einsatz. Eine Idee?
Grundsätzlich haben bei mir die Werte in der Netzwerkkarte und die Werte in den Objekten nie über ein gestimmt (nicht mal annähernd) war aber trotzdem immer ganz nett zum Einschätzen.

`Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20190523}}

[Atifan]

Also irgendwas ist da mit dem Installer glaube ich nicht in Ordnung.
Ich habe ein komplett neues System aufgesetzt.
Dann mein Backup wiederhergestellt -> dabei wurde Zigbee 0.11.5 installiert.
Dann habe ich Zigbee deinstalliert und über Github die aktuelle 1.0.0-d installiert, und jetzt habe ich schon wieder die gleichen Fehler wie heute Mittag.

zigbee.0	2020-01-19 18:26:44.753	error	at binding.open.then.err (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12)
zigbee.0	2020-01-19 18:26:44.753	error	at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
zigbee.0	2020-01-19 18:26:44.753	error	at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49)
zigbee.0	2020-01-19 18:26:44.753	error	at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12)
zigbee.0	2020-01-19 18:26:44.753	error	at new Promise (<anonymous>)
zigbee.0	2020-01-19 18:26:44.753	error	at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71
zigbee.0	2020-01-19 18:26:44.753	error	at Generator.next (<anonymous>)
zigbee.0	2020-01-19 18:26:44.753	error	at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32)
zigbee.0	2020-01-19 18:26:44.753	error	(19809) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
zigbee.0	2020-01-19 18:26:44.752	error	(19809) Failed to start Zigbee
zigbee.0	2020-01-19 18:26:44.692	info	(19809) Starting Zigbee...
zigbee.0	2020-01-19 18:26:44.691	info	(19809) Try to reconnect. 1 attempts left
zigbee.0	2020-01-19 18:26:34.690	error	at Timer.processTimers (timers.js:223:10)
zigbee.0	2020-01-19 18:26:34.690	error	at listOnTimeout (timers.js:263:5)
zigbee.0	2020-01-19 18:26:34.690	error	at tryOnTimeout (timers.js:300:5)
zigbee.0	2020-01-19 18:26:34.690	error	at ontimeout (timers.js:436:11)
zigbee.0	2020-01-19 18:26:34.690	error	at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24)
zigbee.0	2020-01-19 18:26:34.690	error	(19809) Error: SRSP - SYS - version after 6000ms
zigbee.0	2020-01-19 18:26:34.690	error	(19809) Failed to start Zigbee
zigbee.0	2020-01-19 18:26:27.589	info	(19809) Starting Zigbee...
zigbee.0	2020-01-19 18:26:27.578	info	(19809) starting. Version 1.0.0-d in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1
host.iobroker	2020-01-19 18:26:26.417	info	instance system.adapter.zigbee.0 started with pid 19809
host.iobroker	2020-01-19 18:26:24.423	info	instance system.adapter.zigbee.0 terminated with code 156 (156)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[1]: (node:18022) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js proc
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[1]: (node:18022) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:7224:22)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at Zigbee.emit (events.js:198:13)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:312:41)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:277:20)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:165:42)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:179:49)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:208:31)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:153:16)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:133:55)
host.iobroker	2020-01-19 18:26:24.422	error	Caught by controller[0]: (node:18022) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'getEntries' of null
zigbee.0	2020-01-19 18:26:23.914	info	(18022) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
zigbee.0	2020-01-19 18:26:23.914	info	(18022) terminating
zigbee.0	2020-01-19 18:26:23.913	error	at process._tickCallback (internal/process/next_tick.js:68:7))
zigbee.0	2020-01-19 18:26:23.913	error	at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:281:33)
zigbee.0	2020-01-19 18:26:23.913	error	at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:159:16)
zigbee.0	2020-01-19 18:26:23.913	error	at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12)
zigbee.0	2020-01-19 18:26:23.913	error	at new Promise (<anonymous>)
zigbee.0	2020-01-19 18:26:23.913	error	at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71
zigbee.0	2020-01-19 18:26:23.913	error	at Generator.next (<anonymous>)
zigbee.0	2020-01-19 18:26:23.913	error	at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:163:49)
zigbee.0	2020-01-19 18:26:23.913	error	at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:71:15)
zigbee.0	2020-01-19 18:26:23.913	error	at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:59:55)
zigbee.0	2020-01-19 18:26:23.913	error	(18022) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null
zigbee.0	2020-01-19 18:26:23.913	info	(18022) Zigbee: disabling joining new devices.
zigbee.0	2020-01-19 18:26:23.911	info	(18022) cleaned everything up...
zigbee.0	2020-01-19 18:26:23.911	info	(18022) Got terminate signal TERMINATE_YOURSELF
host.iobroker	2020-01-19 18:26:23.909	info	stopInstance system.adapter.zigbee.0 send kill signal
host.iobroker	2020-01-19 18:26:23.909	info	stopInstance system.adapter.zigbee.0 (force=false, process=true)
tankerkoenig.0	2020-01-19 18:25:18.265	info	(11915) Reading data from tankerkoenig ...
zigbee.0	2020-01-19 18:25:15.346	error	at binding.open.then.err (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12)
zigbee.0	2020-01-19 18:25:15.346	error	at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
zigbee.0	2020-01-19 18:25:15.346	error	at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49)
zigbee.0	2020-01-19 18:25:15.346	error	at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12)
zigbee.0	2020-01-19 18:25:15.346	error	at new Promise (<anonymous>)
zigbee.0	2020-01-19 18:25:15.346	error	at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71
zigbee.0	2020-01-19 18:25:15.346	error	at Generator.next (<anonymous>)
zigbee.0	2020-01-19 18:25:15.346	error	at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32)
zigbee.0	2020-01-19 18:25:15.346	error	(18022) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
zigbee.0	2020-01-19 18:25:15.345	error	(18022) Failed to start Zigbee
zigbee.0	2020-01-19 18:25:15.287	info	(18022) Starting Zigbee...
zigbee.0	2020-01-19 18:25:15.286	info	(18022) Try to reconnect. 1 attempts left
zigbee.0	2020-01-19 18:25:05.285	error	at Timer.processTimers (timers.js:223:10)
zigbee.0	2020-01-19 18:25:05.285	error	at listOnTimeout (timers.js:263:5)
zigbee.0	2020-01-19 18:25:05.285	error	at tryOnTimeout (timers.js:300:5)
zigbee.0	2020-01-19 18:25:05.285	error	at ontimeout (timers.js:436:11)
zigbee.0	2020-01-19 18:25:05.285	error	at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24)
zigbee.0	2020-01-19 18:25:05.285	error	(18022) Error: SRSP - SYS - version after 6000ms
zigbee.0	2020-01-19 18:25:05.285	error	(18022) Failed to start Zigbee
zigbee.0	2020-01-19 18:24:58.188	info	(18022) Starting Zigbee...
zigbee.0	2020-01-19 18:24:58.186	error	(18022) Serial port not selected! Go to settings page.
zigbee.0	2020-01-19 18:24:58.177	info	(18022) starting. Version 1.0.0-d in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1
host.iobroker	2020-01-19 18:24:57.111	info	instance system.adapter.zigbee.0 started with pid 18022
host.iobroker	2020-01-19 18:24:55.609	info	iobroker exit 0

[Jan1]

@Atifan
1.0.0-d ? Bei mir steht noch c im Änderungsprotokoll, nicht dass das ne nicht fertige Version ist.
Da müsste @arteck was zu sagen.

[DocGame]

Ich habe mir einen Philips Outdoor BW zugelegt. Gerstern habe ich ihn ohne Probleme angemeldet (cc1352p2 mit Adapter 1.0.0-c). Die Werte in Objekte hat er auch schön eingetragen....genau ein paar Minuten. Dann ging gar nichts mehr.
Habe zig mal probiert ihn neu anzulernen., cc1352p2 abziehen, Adapterneustart usw. Nichts mehr zu machen...er konfiguriert sich einfach nicht mehr. Zurückgesetzt (habe ich ihn auch schon einige mal.
In der Geräteübersicht bekomme ich ihn nicht mehr gelöscht. Nach den Anlernversuchen ist nun auch noch eine "undefined" Kachel erschienen, die ich nicht zuordnen kann und vorher nicht da war. Weiß jemand Rat?

2020-01-19 18:24:28.650 - debug: zigbee.0 (3900) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0
2020-01-19 18:24:28.800 - debug: zigbee.0 (3900) LQI succeeded for 'Coordinator'
2020-01-19 18:24:28.811 - debug: zigbee.0 (3900) Routing for 'Coordinator': {"table":[{"destinationAddress":64286,"status":"DISCOVERY_FAILED","nextHop":65534},{"destinationAddress":22913,"status":"DISCOVERY_FAILED","nextHop":65534},{"destinationAddress":35530,"status":"DISCOVERY_FAILED","nextHop":65534},{"destinationAddress":39560,"status":"ACTIVE","nextHop":39560}]}
2020-01-19 18:24:28.811 - debug: zigbee.0 (3900) Routing table succeeded for 'Coordinator'
2020-01-19 18:24:29.805 - debug: zigbee.0 (3900) LQI succeeded for '0x7cb03eaa00acad07'
2020-01-19 18:24:30.338 - debug: zigbee.0 (3900) getBinding result: []
2020-01-19 18:24:30.339 - debug: zigbee.0 (3900) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0
2020-01-19 18:24:39.807 - debug: zigbee.0 (3900) Failed to execute routing table for '0x7cb03eaa00acad07'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2020-01-19 18:24:39.807 - debug: zigbee.0 (3900) Routing for '0x7cb03eaa00acad07': {"neighbors":[{"linkquality":0,"networkAddress":39560,"ieeeAddr":"0x7cb03eaa0a07b6c8","relationship":2,"depth":1},{"linkquality":0,"networkAddress":55532,"ieeeAddr":"0x7cb03eaa0a016776","relationship":2,"depth":1},{"linkquality":0,"networkAddress":5135,"ieeeAddr":"0x84182600000e8d75","relationship":2,"depth":1},{"linkquality":0,"networkAddress":24390,"ieeeAddr":"0x00158d0002c63f59","relationship":2,"depth":1},{"linkquality":0,"networkAddress":35392,"ieeeAddr":"0xccccccfffe9734b3","relationship":1,"depth":1},{"linkquality":0,"networkAddress":10321,"ieeeAddr":"0x7cb03eaa0a050960","relationship":2,"depth":1},{"linkquality":0,"networkAddress":18295,"ieeeAddr":"0x7cb03eaa0a07cf0e","relationship":2,"depth":1},{"linkquality":0,"networkAddress":31563,"ieeeAddr":"0x841826000010673d","relationship":2,"depth":1},{"linkquality":0,"networkAddress":21019,"ieeeAddr":"0x7cb03eaa0a036286","relationship":2,"depth":1},{"linkquality":0,"networkAddress":64286,"ieeeAddr":"0x84182600000e47bf","relationship":2,"depth":1},{"linkquality":0,"networkAddress":52037,"ieeeAddr":"0x00158d00028f7b08","relationship":1,"depth":1},{"linkquality":0,"networkAddress":49822,"ieeeAddr":"0x00158d0002a523d7","relationship":1,"depth":1},{"linkquality":0,"networkAddress":610,"ieeeAddr":"0x7cb03eaa0a07b27e","relationship":2,"depth":1},{"linkquality":0,"networkAddress":145,"ieeeAddr":"0x00158d0002238339","relationship":1,"depth":1},{"linkquality":0,"networkAddress":26364,"ieeeAddr":"0x00158d0002c8ca73","relationship":1,"depth":1}]}
2020-01-19 18:24:39.808 - debug: zigbee.0 (3900) Routing table succeeded for '0x7cb03eaa00acad07'
2020-01-19 18:24:40.353 - debug: zigbee.0 (3900) LQI succeeded for '0x84182600000e47bf'
2020-01-19 18:24:50.358 - debug: zigbee.0 (3900) Failed to execute routing table for '0x84182600000e47bf'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2020-01-19 18:24:50.359 - debug: zigbee.0 (3900) Routing for '0x84182600000e47bf': {"neighbors":[{"linkquality":0,"networkAddress":10321,"ieeeAddr":"0x7cb03eaa0a050960","relationship":2,"depth":1},{"linkquality":0,"networkAddress":0,"ieeeAddr":"0x00124b001ca60d31","relationship":0,"depth":1},{"linkquality":0,"networkAddress":31563,"ieeeAddr":"0x841826000010673d","relationship":2,"depth":1},{"linkquality":0,"networkAddress":10895,"ieeeAddr":"0x00158d0003e748be","relationship":1,"depth":1},{"linkquality":0,"networkAddress":55532,"ieeeAddr":"0x7cb03eaa0a016776","relationship":2,"depth":1},{"linkquality":0,"networkAddress":24390,"ieeeAddr":"0x00158d0002c63f59","relationship":2,"depth":1},{"linkquality":0,"networkAddress":18295,"ieeeAddr":"0x7cb03eaa0a07cf0e","relationship":2,"depth":1},{"linkquality":0,"networkAddress":21019,"ieeeAddr":"0x7cb03eaa0a036286","relationship":2,"depth":1},{"linkquality":0,"networkAddress":610,"ieeeAddr":"0x7cb03eaa0a07b27e","relationship":2,"depth":1},{"linkquality":0,"networkAddress":5135,"ieeeAddr":"0x84182600000e8d75","relationship":2,"depth":1},{"linkquality":0,"networkAddress":39560,"ieeeAddr":"0x7cb03eaa0a07b6c8","relationship":2,"depth":1},{"linkquality":0,"networkAddress":22913,"ieeeAddr":"0x7cb03eaa00acad07","relationship":2,"depth":1}]}
2020-01-19 18:24:50.360 - debug: zigbee.0 (3900) Routing table succeeded for '0x84182600000e47bf'
2020-01-19 18:24:59.350 - debug: zigbee.0 (3900) system.adapter.admin.0: logging false
2020-01-19 18:25:00.672 - debug: zigbee.0 (3900) Failed to execute LQI for '0x841826000010673d'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2020-01-19 18:25:00.673 - debug: zigbee.0 (3900) LQI succeeded for '0x841826000010673d'
2020-01-19 18:25:04.262 - info: host.IOBroker(SmartHome) stopInstance system.adapter.zigbee.0 (force=false, process=true)
2020-01-19 18:25:04.263 - info: host.IOBroker(SmartHome) stopInstance system.adapter.zigbee.0 send kill signal
2020-01-19 18:25:04.271 - info: zigbee.0 (3900) Got terminate signal TERMINATE_YOURSELF
2020-01-19 18:25:04.273 - info: zigbee.0 (3900) cleaned everything up...
2020-01-19 18:25:04.276 - info: zigbee.0 (3900) Zigbee: disabling joining new devices.
2020-01-19 18:25:04.276 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa00acad07 = false
2020-01-19 18:25:04.277 - debug: zigbee.0 (3900) Publish available for 0xccccccfffe9734b3 = false
2020-01-19 18:25:04.278 - debug: zigbee.0 (3900) Publish available for 0x84182600000e47bf = false
2020-01-19 18:25:04.279 - debug: zigbee.0 (3900) Publish available for 0x841826000010673d = false
2020-01-19 18:25:04.281 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a016776 = false
2020-01-19 18:25:04.281 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a07cf0e = false
2020-01-19 18:25:04.282 - debug: zigbee.0 (3900) Publish available for 0x84182600000e8d75 = false
2020-01-19 18:25:04.283 - debug: zigbee.0 (3900) Publish available for 0x04cf8cdf3c75b44a = false
2020-01-19 18:25:04.284 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a07b27e = false
2020-01-19 18:25:04.285 - debug: zigbee.0 (3900) Publish available for 0x00158d0002c63f59 = false
2020-01-19 18:25:04.286 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a036286 = false
2020-01-19 18:25:04.286 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a050960 = false
2020-01-19 18:25:04.287 - debug: zigbee.0 (3900) Publish available for 0x00158d000289e4c9 = false
2020-01-19 18:25:04.288 - debug: zigbee.0 (3900) Publish available for 0x00158d000255dc96 = false
2020-01-19 18:25:04.289 - debug: zigbee.0 (3900) Publish available for 0x7cb03eaa0a07b6c8 = false
2020-01-19 18:25:04.290 - debug: zigbee.0 (3900) Publish available for 0x00158d0002c8ca73 = false
2020-01-19 18:25:04.291 - debug: zigbee.0 (3900) Publish available for 0x00158d0002238339 = false
2020-01-19 18:25:04.292 - debug: zigbee.0 (3900) Publish available for 0x00158d0002a523d7 = false
2020-01-19 18:25:04.292 - debug: zigbee.0 (3900) Publish available for 0xec1bbdfffe972085 = false
2020-01-19 18:25:04.293 - debug: zigbee.0 (3900) Publish available for 0x0017880104f18654 = false
2020-01-19 18:25:04.294 - debug: zigbee.0 (3900) Publish available for 0x00158d0003e748be = false
2020-01-19 18:25:04.295 - debug: zigbee.0 (3900) Publish available for 0x00158d0002d40924 = false
2020-01-19 18:25:04.295 - debug: zigbee.0 (3900) Publish available for 0x00158d0002ca09bc = false
2020-01-19 18:25:04.296 - debug: zigbee.0 (3900) Publish available for 0x00158d00028f7b08 = false
2020-01-19 18:25:04.297 - debug: zigbee.0 (3900) Publish available for 0x00158d00028f7bcd = false
2020-01-19 18:25:04.298 - debug: zigbee.0 (3900) Publish available for 0x00124b00199448e7 = false
2020-01-19 18:25:04.298 - debug: zigbee.0 (3900) Publish available for 0x04cf8cdf3c75c2c5 = false
2020-01-19 18:25:04.299 - debug: zigbee.0 (3900) Publish available for 0x00158d00029279c0 = false
2020-01-19 18:25:04.300 - debug: zigbee.0 (3900) Publish available for 0x001788010645c3e7 = false
2020-01-19 18:25:04.564 - debug: zigbee.0 (3900) Wrong device 0017880104f18654 null
2020-01-19 18:25:04.616 - info: zigbee.0 (3900) terminating
2020-01-19 18:25:04.618 - info: zigbee.0 (3900) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2020-01-19 18:25:05.181 - info: host.IOBroker(SmartHome) instance system.adapter.zigbee.0 terminated with code 4294967196 (START_IMMEDIATELY_AFTER_STOP_HEX)
2020-01-19 18:25:06.845 - info: host.IOBroker(SmartHome) instance system.adapter.zigbee.0 started with pid 8252
2020-01-19 18:25:11.542 - info: zigbee.0 (8252) starting. Version 1.0.0-c in C:/Iobroker/SmartHome/node_modules/iobroker.zigbee, node: v10.16.3
2020-01-19 18:25:11.584 - info: zigbee.0 (8252) Starting Zigbee...
2020-01-19 18:25:13.387 - info: zigbee.0 (8252) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20191106}}
2020-01-19 18:25:13.410 - info: zigbee.0 (8252) Unable to disable LED, unsupported function.
2020-01-19 18:25:13.467 - info: zigbee.0 (8252) Currently 29 devices are joined:
2020-01-19 18:25:13.478 - info: zigbee.0 (8252) Configuring 0x001788010645c3e7 SML002
2020-01-19 18:25:13.487 - info: zigbee.0 (8252) 0x7cb03eaa00acad07 (addr 22913): AB3257001NJ - OSRAM Smart+ plug (Router)
2020-01-19 18:25:13.489 - info: zigbee.0 (8252) 0xccccccfffe9734b3 (addr 61304): E1524/E1810 - IKEA TRADFRI remote control (EndDevice)
2020-01-19 18:25:13.490 - info: zigbee.0 (8252) 0x84182600000e47bf (addr 64286): AB3257001NJ - OSRAM Smart+ plug (Router)
2020-01-19 18:25:13.490 - info: zigbee.0 (8252) 0x841826000010673d (addr 31563): AB3257001NJ - OSRAM Smart+ plug (Router)
2020-01-19 18:25:13.491 - info: zigbee.0 (8252) 0x7cb03eaa0a016776 (addr 55532): AB3257001NJ - OSRAM Smart+ plug (Router)
2020-01-19 18:25:13.492 - info: zigbee.0 (8252) 0x7cb03eaa0a07cf0e (addr 18295): AB3257001NJ - OSRAM Smart+ plug (Router)
2020-01-19 18:25:13.492 - info: zigbee.0 (8252) 0x84182600000e8d75 (addr 5135): AB3257001NJ - OSRAM Smart+ plug (Router)
2020-01-19 18:25:13.493 - info: zigbee.0 (8252) 0x04cf8cdf3c75b44a (addr 48447): WXCJKG13LM - Xiaomi Aqara Opple switch 3 bands (EndDevice)
2020-01-19 18:25:13.493 - info: zigbee.0 (8252) 0x7cb03eaa0a07b27e (addr 610): AB3257001NJ - OSRAM Smart+ plug (Router)
2020-01-19 18:25:13.494 - info: zigbee.0 (8252) 0x00158d0002c63f59 (addr 24390): ZNLDP12LM - Xiaomi Aqara smart LED bulb (Router)
2020-01-19 18:25:13.495 - info: zigbee.0 (8252) 0x7cb03eaa0a036286 (addr 21019): AC03641 - OSRAM LIGHTIFY LED Classic A60 clear (Router)
2020-01-19 18:25:13.495 - info: zigbee.0 (8252) 0x7cb03eaa0a050960 (addr 10321): AC03641 - OSRAM LIGHTIFY LED Classic A60 clear (Router)
2020-01-19 18:25:13.496 - info: zigbee.0 (8252) 0x00158d000289e4c9 (addr 9335): MFKZQ01LM - Xiaomi Mi/Aqara smart home cube (EndDevice)
2020-01-19 18:25:13.496 - info: zigbee.0 (8252) 0x00158d000255dc96 (addr 5485): WXKG02LM - Xiaomi Aqara double key wireless wall switch (EndDevice)
2020-01-19 18:25:13.497 - info: zigbee.0 (8252) 0x7cb03eaa0a07b6c8 (addr 39560): AB3257001NJ - OSRAM Smart+ plug (Router)
2020-01-19 18:25:13.498 - info: zigbee.0 (8252) 0x00158d0002c8ca73 (addr 26364): WXKG01LM - Xiaomi MiJia wireless switch (EndDevice)
2020-01-19 18:25:13.498 - info: zigbee.0 (8252) 0x00158d0002238339 (addr 145): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice)
2020-01-19 18:25:13.498 - info: zigbee.0 (8252) 0x00158d0002a523d7 (addr 49822): DJT11LM - Xiaomi Aqara vibration sensor (EndDevice)
2020-01-19 18:25:13.499 - info: zigbee.0 (8252) 0xec1bbdfffe972085 (addr 24782): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice)
2020-01-19 18:25:13.499 - info: zigbee.0 (8252) 0x0017880104f18654 (addr 35530): Not supported (model undefined)(EndDevice)
2020-01-19 18:25:13.500 - info: zigbee.0 (8252) 0x00158d0003e748be (addr 10895): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2020-01-19 18:25:13.500 - info: zigbee.0 (8252) 0x00158d0002d40924 (addr 2026): WXKG02LM - Xiaomi Aqara double key wireless wall switch (EndDevice)
2020-01-19 18:25:13.501 - info: zigbee.0 (8252) 0x00158d0002ca09bc (addr 65376): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2020-01-19 18:25:13.501 - info: zigbee.0 (8252) 0x00158d00028f7b08 (addr 52037): WXKG03LM - Xiaomi Aqara single key wireless wall switch (EndDevice)
2020-01-19 18:25:13.502 - info: zigbee.0 (8252) 0x00158d00028f7bcd (addr 3601): WXKG03LM - Xiaomi Aqara single key wireless wall switch (EndDevice)
2020-01-19 18:25:13.502 - info: zigbee.0 (8252) 0x00124b00199448e7 (addr 40353): GL-C-007/GL-C-008 - Gledopto Zigbee LED controller RGB + CCT or RGBW (Router)
2020-01-19 18:25:13.503 - info: zigbee.0 (8252) 0x04cf8cdf3c75c2c5 (addr 28089): WXCJKG12LM - Xiaomi Aqara Opple switch 2 bands (EndDevice)
2020-01-19 18:25:13.503 - info: zigbee.0 (8252) 0x00158d00029279c0 (addr 61830): 50044/50045 - Paulmann SmartHome Zigbee Dimmer or LED-stripe (Router)
2020-01-19 18:25:13.504 - info: zigbee.0 (8252) 0x001788010645c3e7 (addr 44098): 9290019758 - Philips Hue motion outdoor sensor (EndDevice)
2020-01-19 18:25:13.509 - info: zigbee.0 (8252) Zigbee started
2020-01-19 18:25:18.328 - info: sonoff.0 (1196) Client [Hobbydecke] reconnected. Old secret 1579454495935_4533. New secret 1579454718288_5146
2020-01-19 18:25:23.503 - error: zigbee.0 (8252) Failed to configure 0x001788010645c3e7 SML002, attempt 1 (Error: AREQ - ZDO - bindRsp after 10000ms
at Timeout.object.timer.setTimeout [as _onTimeout] (C:\Iobroker\SmartHome\node_modules\iobroker.zigbee\node_modules\zigbee-herdsman\dist\utils\waitress.js:44:24)
at ontimeout (timers.js:436:11)
at tryOnTimeout (timers.js:300:5)
at listOnTimeout (timers.js:263:5)
at Timer.processTimers (timers.js:223:10))

[arteck]

@Jan1 1.0.0-d ist die neue..

@Atifan

Also irgendwas ist da mit dem Installer glaube ich nicht in Ordnung.

der ist gut.. sry das ich jetzt lache aber .. egal....
Multihost ??
und hör auf irgendwelche wilden konstellationen auszuprobieren.. wenn du ein backup zurück spielst dann installiere OHNE WAS ZU LÖSCHEN aus dem GIT und gut ist..

@DocGame installiere die neue Version... dann schau nochmal.. mit dem BWM..
die ? Kachel ist ein nicht erkanntes Gerät

[Atifan]

Ähm ich will mein System zum Laufen bekommen, deswegen habe ich verschiedene Sachen ausprobiert, leider ohne Erfolg.
Keine Ahnung woran es liegt, aber irgendwas stimmt nicht.

[Jan1]

@arteck
Ja, habe ich bei mir mittlerweile auch drauf und läuft.
Bin bei Git Installationen lieber bisschen vorsichtig, wenn dazu nirgends was offizielles steht und auf Github steht nun mal noch die "C" als aktuell.

[Muchul]

@Atifan
Du hattest weiter oben geschrieben der Stick sei an der Nuc angeschlossen, ist der direkt eingesteckt oder mit einem Kabel?
Falls direkt angeschlossen, mach mal ein Kabel dazwischen.
Bei mir hat das wundergewirkt.
Natürlich dann auch eine saubere instaltion durchführen.

[arteck]

@Atifan ich lese gerade du hast den cc2531 am NUC dran.. ist der Port durchgereicht.. nach dem Container start .. den daran wird es liegen..das der serialport nicht auf geht

@Muchul das ist schwachsinn (sry).. ihr mit euren Kabel.. das hilft nur wenn du WLAN aktiviert hast .. das WLAN überlager dann das signal vom vom Stick .. ist ja die gleiche Frequenz.. und da hilft das Kabel.. rämliche Trennung ist hier das Zauberwort.
ansonsten was soll so ein Kabel bewirken.. da passieren keine Wunder.. alles nur Physik