UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Schrubbel]

Gibt es eigentlich eine empfohlene Firmware für den CC2531 Stick?
Momentan habe ich die 20190608 drauf oder sollte man lieber die 20190619 nehmen?

[DocGame]

Nachdem mein cc1352p-2 so gut mit dem Herdsman läuft ziehe ich momentan mit immer mehr Geräten vom Deconz und den Hi-Hubs um.
Generell funktioniert das relativ gut (manche brauchen einige Versuche).
Was mich etwas stört. Seit gleich nach dem Installieren kamen Fehlermeldungen beim Pairen, die jetzt bei jedem Pairen der neuen Geräte wieder auftaucht. Wie bekomme ich das weg? in der Shepard.db?

Ansonsten.....Super Arbeit

PS.: Wenn ein Schalter technisch mehr States liefertals im Adapter angelegt. Wo kann ich wegen dem implementieren ein Issue aufmachen?
https://github.com/Koenkk/zigbee2mqtt
https://github.com/Koenkk/zigbee-herdsman-converters
oder könnt ihr helfen? https://github.com/ioBroker/ioBroker.zigbee

Habe mein Problem schon in diesem Post beschrieben:
https://forum.iobroker.net/topic/26716/aqara-xiaomi-aqara-opple-scene-switch/24

Gruß Ralf

[Asgothian]

@BlackHawk3000 sagte in Zigbee Adapter mit neuem Converter:

@Asgothian said in Zigbee Adapter mit neuem Converter:

@BlackHawk3000
bitte prüf mal ob der Serielle Port zum Stick noch blockiert ist. Es sieht sehr nach Problemen mit der seriellen Kommunikation mit dem Stick.

A.

Wie prüfe ich das denn?
Bin in Linux nicht so firm :anguished:

das einfachste ist: Zigbee adapter anhalten, system neu starten, dann muss der serielle port frei sein.

A.

[Ritter]

Hallo,

Habe auch auf den neuen Converter umgestellt. Alle Lampen (Müller, Osram Ikea), Osram Steckdose und Aquara Temperatursensor funktioniert. Ein Led Stripe Controller GLEDOPTO GL-C-008S wird nur mit ? gefunden. Laut Liste sollte er kompatibel sein, auch die Plus Variante mit dem S hinten dran. Der GL-C-007S geht auch nicht, steht aber auch nicht in der Liste. Kann ich ausser an und Abmelden noch was probieren? Wenn ich die Geräte wieder löschen möchte bleiben sie aber noch mit Fragezeichen da, auch kompatible.

im log steht:

zigbee.0 2019-12-24 17:20:47.833 info (11739) Zigbee: stop joining
zigbee.0 2019-12-24 17:20:39.170 warn (11739) Failed to execute routing table for '0x7cb03eaa0a04336c'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigb
zigbee.0 2019-12-24 17:20:28.929 warn (11739) Failed to execute routing table for '0x00158d0003475b7f'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigb
zigbee.0 2019-12-24 17:20:18.925 error (11739) Failed to execute LQI for '0x00158d0003475b7f'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsma
zigbee.0 2019-12-24 17:20:01.617 warn (11739) Failed to execute routing table for '0x086bd7fffe3285a2'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigb
zigbee.0 2019-12-24 17:19:51.613 error (11739) Failed to execute LQI for '0x086bd7fffe3285a2'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsma
zigbee.0 2019-12-24 17:19:48.247 info (11739) Device '0x00124b001edd62ff' is supported, identified as: Gledopto Zigbee LED controller RGB + CCT plus model (GL-C-008S)
zigbee.0 2019-12-24 17:19:48.246 info (11739) Successfully interviewed '0x00124b001edd62ff', device has succesfully been paired
zigbee.0 2019-12-24 17:19:48.209 error (11739) Device 00124b001edd62ff "GL-C-008S" not described in statesMapping.
zigbee.0 2019-12-24 17:19:47.867 warn (11739) Failed to execute routing table for '0x00124b001edd62ff'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigb
zigbee.0 2019-12-24 17:19:41.614 error (11739) Device 00124b001edd62ff "GL-C-008S" not described in statesMapping.

[Garfonso]

@Schrubbel said in Zigbee Adapter mit neuem Converter:

Gibt es eigentlich eine empfohlene Firmware für den CC2531 Stick?
Momentan habe ich die 20190608 drauf oder sollte man lieber die 20190619 nehmen?

Faustregel: Wenn alles geht, ist kein Update notwendig. ;-)
Gerade bei den beiden Versionen gibt es, wenn die aktuelle geht, gar keinen Grund etwas zu ändern, unter Umständen kann es deutlich schlechter werden. Bei der 20190619 ist source routing aktiviert, das soll in Netzen mit vielen Geräten (>40 oder so) helfen, kann aber auch zu Problemen führen (z.B., dass Geräte nach einer Zeit nicht mehr direkt ansprechbar sind, aber über Gruppen geht es noch, das hatte ich oft). Von daher: nicht wechseln, wenn du keinen guten Grund hast.

[DocGame]

Auch ich habe Unmengen an Fehlermeldungen. Irgendwie scheint es ja ein Timer Problem zu geben.
Die Geräte laufen alle aber die Fehler beim Pairen (Post weiter oben) und im Log geben mir zu denken.
Kann man was dagegen tun?
Hier der Log:

2019-12-25 00:54:25.548 - info: host.IOBroker(SmartHome) instance system.adapter.zigbee.0 terminated with code null ()
2019-12-25 00:54:26.690 - info: host.IOBroker(SmartHome) instance system.adapter.zigbee.0 started with pid 22932
2019-12-25 00:54:33.777 - info: zigbee.0 (22932) starting. Version 1.0.0-b in C:/Iobroker/SmartHome/node_modules/iobroker.zigbee, node: v10.16.3
2019-12-25 00:54:33.826 - info: zigbee.0 (22932) Starting Zigbee...
2019-12-25 00:54:35.974 - info: zigbee.0 (22932) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20191106}}
2019-12-25 00:54:35.990 - info: zigbee.0 (22932) Unable to disable LED, unsupported function.
2019-12-25 00:54:35.990 - info: zigbee.0 (22932) --> transmitPower : -22
2019-12-25 00:54:36.047 - info: zigbee.0 (22932) Currently 28 devices are joined:
2019-12-25 00:54:36.054 - info: zigbee.0 (22932) Configuring 0x04cf8cdf3c75b44a lumi.remote.b686opcn01
2019-12-25 00:54:36.063 - info: zigbee.0 (22932) 0x7cb03eaa0a07b6c8 (addr 10073): AB3257001NJ - OSRAM Smart+ plug (Router)
2019-12-25 00:54:36.063 - info: zigbee.0 (22932) 0x7cb03eaa0a07b27e (addr 15178): AB3257001NJ - OSRAM Smart+ plug (Router)
2019-12-25 00:54:36.064 - info: zigbee.0 (22932) 0x84182600000e47bf (addr 47298): AB3257001NJ - OSRAM Smart+ plug (Router)
2019-12-25 00:54:36.064 - info: zigbee.0 (22932) 0x841826000010673d (addr 38644): AB3257001NJ - OSRAM Smart+ plug (Router)
2019-12-25 00:54:36.065 - info: zigbee.0 (22932) 0x00158d000255dc96 (addr 1374): WXKG02LM - Xiaomi Aqara double key wireless wall switch (EndDevice)
2019-12-25 00:54:36.065 - info: zigbee.0 (22932) 0x7cb03eaa0a07cf0e (addr 26335): AB3257001NJ - OSRAM Smart+ plug (Router)
2019-12-25 00:54:36.066 - info: zigbee.0 (22932) 0x7cb03eaa0a016776 (addr 19576): AB3257001NJ - OSRAM Smart+ plug (Router)
2019-12-25 00:54:36.066 - info: zigbee.0 (22932) 0x84182600000e8d75 (addr 30467): AB3257001NJ - OSRAM Smart+ plug (Router)
2019-12-25 00:54:36.067 - info: zigbee.0 (22932) 0x7cb03eaa00acad07 (addr 54035): AB3257001NJ - OSRAM Smart+ plug (Router)
2019-12-25 00:54:36.067 - info: zigbee.0 (22932) 0xec1bbdfffe972085 (addr 42481): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice)
2019-12-25 00:54:36.067 - info: zigbee.0 (22932) 0x04cf8cdf3c75b44a (addr 25822): WXCJKG13LM - Xiaomi Aqara Opple switch 3 bands (EndDevice)
2019-12-25 00:54:36.068 - info: zigbee.0 (22932) 0x00158d00028f7b08 (addr 53798): WXKG03LM - Xiaomi Aqara single key wireless wall switch (EndDevice)
2019-12-25 00:54:36.068 - info: zigbee.0 (22932) 0x04cf8cdf3c75c2c5 (addr 40615): WXCJKG12LM - Xiaomi Aqara Opple switch 2 bands (EndDevice)
2019-12-25 00:54:36.069 - info: zigbee.0 (22932) 0xccccccfffe9734b3 (addr 54953): E1524/E1810 - IKEA TRADFRI remote control (EndDevice)
2019-12-25 00:54:36.069 - info: zigbee.0 (22932) 0x00158d000289e4c9 (addr 24380): MFKZQ01LM - Xiaomi Mi/Aqara smart home cube (EndDevice)
2019-12-25 00:54:36.070 - info: zigbee.0 (22932) 0x0017880104f18654 (addr 46006): 324131092621 - Philips Hue dimmer switch (EndDevice)
2019-12-25 00:54:36.071 - info: zigbee.0 (22932) 0x00124b00199448e7 (addr 33729): GL-C-008 - Gledopto Zigbee LED controller RGB + CCT (Router)
2019-12-25 00:54:36.071 - info: zigbee.0 (22932) 0x00158d0002c63f59 (addr 52457): ZNLDP12LM - Xiaomi Aqara smart LED bulb (EndDevice)
2019-12-25 00:54:36.072 - info: zigbee.0 (22932) 0x7cb03eaa0a050960 (addr 33724): AC03641 - OSRAM LIGHTIFY LED Classic A60 clear (Router)
2019-12-25 00:54:36.073 - info: zigbee.0 (22932) 0x7cb03eaa0a036286 (addr 8995): AC03641 - OSRAM LIGHTIFY LED Classic A60 clear (Router)
2019-12-25 00:54:36.073 - info: zigbee.0 (22932) 0x00158d0002c63dc8 (addr 35036): ZNLDP12LM - Xiaomi Aqara smart LED bulb (Router)
2019-12-25 00:54:36.074 - info: zigbee.0 (22932) 0x00178801028652de (addr 30102): 8718696449691 - Philips Hue White Single bulb B22 (Router)
2019-12-25 00:54:36.074 - info: zigbee.0 (22932) 0x00158d00028f7bcd (addr 42654): WXKG03LM - Xiaomi Aqara single key wireless wall switch (EndDevice)
2019-12-25 00:54:36.075 - info: zigbee.0 (22932) 0x00158d0002c8ca73 (addr 11574): WXKG01LM - Xiaomi MiJia wireless switch (EndDevice)
2019-12-25 00:54:36.075 - info: zigbee.0 (22932) 0x00158d0004216e65 (addr 46515): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2019-12-25 00:54:36.076 - info: zigbee.0 (22932) 0x00158d0002d40924 (addr 19664): WXKG02LM - Xiaomi Aqara double key wireless wall switch (EndDevice)
2019-12-25 00:54:36.078 - info: zigbee.0 (22932) 0x00158d0003e748be (addr 56062): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2019-12-25 00:54:36.081 - info: zigbee.0 (22932) 0x00158d0002ca09bc (addr 38230): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2019-12-25 00:54:36.082 - info: zigbee.0 (22932) Zigbee started
2019-12-25 00:54:46.065 - error: zigbee.0 (22932) Failed to configure 0x04cf8cdf3c75b44a lumi.remote.b686opcn01, attempt 1 (Error: AREQ - ZDO - bindRsp after 10000ms
at Timeout.object.timer.setTimeout [as _onTimeout] (C:\Iobroker\SmartHome\node_modules\iobroker.zigbee\node_modules\zigbee-herdsman\dist\utils\waitress.js:44:24)
at ontimeout (timers.js:436:11)
at tryOnTimeout (timers.js:300:5)
at listOnTimeout (timers.js:263:5)
at Timer.processTimers (timers.js:223:10))
2019-12-25 00:54:46.066 - info: zigbee.0 (22932) Configuring 0x04cf8cdf3c75c2c5 lumi.remote.b486opcn01
2019-12-25 00:54:56.079 - error: zigbee.0 (22932) Failed to configure 0x04cf8cdf3c75c2c5 lumi.remote.b486opcn01, attempt 1 (Error: AREQ - ZDO - bindRsp after 10000ms
at Timeout.object.timer.setTimeout [as _onTimeout] (C:\Iobroker\SmartHome\node_modules\iobroker.zigbee\node_modules\zigbee-herdsman\dist\utils\waitress.js:44:24)
at ontimeout (timers.js:436:11)
at tryOnTimeout (timers.js:300:5)
at listOnTimeout (timers.js:263:5)
at Timer.processTimers (timers.js:223:10))
2019-12-25 00:54:56.081 - info: zigbee.0 (22932) Configuring 0x0017880104f18654 RWL021
2019-12-25 00:54:58.518 - info: zigbee.0 (22932) Zigbee: allowing new devices to join.
2019-12-25 00:55:00.935 - warn: zigbee.0 (22932) Failed to execute routing table for '0x7cb03eaa0a07b6c8'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:55:07.698 - error: zigbee.0 (22932) Failed to configure 0x0017880104f18654 RWL021, attempt 1 (Error: AREQ - ZDO - bindRsp after 10000ms
at Timeout.object.timer.setTimeout [as _onTimeout] (C:\Iobroker\SmartHome\node_modules\iobroker.zigbee\node_modules\zigbee-herdsman\dist\utils\waitress.js:44:24)
at ontimeout (timers.js:436:11)
at tryOnTimeout (timers.js:300:5)
at listOnTimeout (timers.js:263:5)
at Timer.processTimers (timers.js:223:10))
2019-12-25 00:55:08.988 - info: javascript.0 (6072) script.js.Bot-Scripts.Batterie_Telegramm: {"id":"mihome.0.devices.smoke_158d000287ac2a.percent","newState":{"val":73.4,"ts":1577231708968,"ack":true,"lc":1577231708968,"from":"system.adapter.mihome.0","q":0},"oldState":{"val":71.6,"ts":1577228480798,"ack":true,"lc":1577205011731,"from":"system.adapter.mihome.0","q":0},"state":{"val":73.4,"ts":1577231708968,"ack":true,"lc":1577231708968,"from":"system.adapter.mihome.0","q":0}}
2019-12-25 00:55:11.190 - warn: zigbee.0 (22932) Failed to execute routing table for '0x7cb03eaa0a07b27e'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:55:21.257 - info: zigbee.0 (22932) Configuring 0x04cf8cdf3c75b44a lumi.remote.b686opcn01
2019-12-25 00:55:21.400 - error: zigbee.0 (22932) Failed to execute LQI for '0x84182600000e47bf'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:55:31.265 - error: zigbee.0 (22932) Failed to configure 0x04cf8cdf3c75b44a lumi.remote.b686opcn01, attempt 2 (Error: AREQ - ZDO - bindRsp after 10000ms
at Timeout.object.timer.setTimeout [as _onTimeout] (C:\Iobroker\SmartHome\node_modules\iobroker.zigbee\node_modules\zigbee-herdsman\dist\utils\waitress.js:44:24)
at ontimeout (timers.js:436:11)
at tryOnTimeout (timers.js:300:5)
at listOnTimeout (timers.js:263:5)
at Timer.processTimers (timers.js:223:10))
2019-12-25 00:55:31.402 - warn: zigbee.0 (22932) Failed to execute routing table for '0x84182600000e47bf'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:55:41.742 - warn: zigbee.0 (22932) Failed to execute routing table for '0x841826000010673d'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:55:47.533 - info: zigbee.0 (22932) Configuring 0x04cf8cdf3c75b44a lumi.remote.b686opcn01
2019-12-25 00:55:52.089 - warn: zigbee.0 (22932) Failed to execute routing table for '0x7cb03eaa0a07cf0e'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:55:57.544 - error: zigbee.0 (22932) Failed to configure 0x04cf8cdf3c75b44a lumi.remote.b686opcn01, attempt 3 (Error: AREQ - ZDO - bindRsp after 10000ms
at Timeout.object.timer.setTimeout [as _onTimeout] (C:\Iobroker\SmartHome\node_modules\iobroker.zigbee\node_modules\zigbee-herdsman\dist\utils\waitress.js:44:24)
at ontimeout (timers.js:436:11)
at tryOnTimeout (timers.js:300:5)
at listOnTimeout (timers.js:263:5)
at Timer.processTimers (timers.js:223:10))
2019-12-25 00:56:02.225 - info: zigbee.0 (22932) Zigbee: stop joining
2019-12-25 00:56:02.463 - warn: zigbee.0 (22932) Failed to execute routing table for '0x7cb03eaa0a016776'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:56:12.774 - error: zigbee.0 (22932) Failed to execute LQI for '0x84182600000e8d75'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:56:22.777 - warn: zigbee.0 (22932) Failed to execute routing table for '0x84182600000e8d75'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:56:33.727 - warn: zigbee.0 (22932) Failed to execute routing table for '0x7cb03eaa00acad07'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:56:46.322 - error: zigbee.0 (22932) Failed to execute LQI for '0x7cb03eaa0a050960'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:56:56.323 - warn: zigbee.0 (22932) Failed to execute routing table for '0x7cb03eaa0a050960'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:57:06.439 - error: zigbee.0 (22932) Failed to execute LQI for '0x7cb03eaa0a036286'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:57:16.443 - warn: zigbee.0 (22932) Failed to execute routing table for '0x7cb03eaa0a036286'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:57:26.445 - error: zigbee.0 (22932) Failed to execute LQI for '0x00158d0002c63dc8'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:57:36.448 - warn: zigbee.0 (22932) Failed to execute routing table for '0x00158d0002c63dc8'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:57:46.449 - error: zigbee.0 (22932) Failed to execute LQI for '0x00178801028652de'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"
2019-12-25 00:57:56.451 - warn: zigbee.0 (22932) Failed to execute routing table for '0x00178801028652de'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n at Timeout.object.timer.setTimeout [as _onTimeout] (C:\\Iobroker\\SmartHome\\node_modules\\iobroker.zigbee\\node_modules\\zigbee-herdsman\\dist\\utils\\waitress.js:44:24)\n at ontimeout (timers.js:436:11)\n at tryOnTimeout (timers.js:300:5)\n at listOnTimeout (timers.js:263:5)\n at Timer.processTimers (timers.js:223:10)"

[Schrubbel]

@Garfonso
Okay Danke. Das ist ja auch richtig so.
Nur habe ich auch die ganzen Routing Fehlermeldungen bei den Plugs, da dachte ich das die Routing FW vielleicht besser wäre. Da aber im großen und ganzen alles funktioniert werde ich alles so lassen bis mein neuer Stick fertig ist.

[heinzie]

mal ein blöde Frage, kann man mit dem Adapter auch Werte von z.B. dem Aqara Temperatursensor direkt abfragen?
oder gibt es nur neue Werte wenn des Sensor die selber liefert

[arteck]

@DocGame es sind nur warnings. die Geräte antworten nicht in der vorgegebenen Zeit

[arteck]

@heinzie nein .. alle Sensoren liefern die Werte ab.. man kann die nicht extra antriggern

[Matdos]

Installation klappt nicht bekomme die Fehlermeldung, fehlen hier Rechte für die Installation?

$ ./iobroker url "https://github.com/ioBroker/ioBroker.zigbee/tarball/herdsman" --debug
install https://github.com/ioBroker/ioBroker.zigbee/tarball/herdsman
npm install https://github.com/ioBroker/ioBroker.zigbee/tarball/herdsman --production --save --prefix "/opt/iobroker" (System call)
npm
WARN checkPermissions Missing write access to /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters/node_modules/debugnpm WARN checkPermissions Missing write access to /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters/node_modules/zcl-id
npm WARN checkPermissions Missing write access to /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters
npm WARN checkPermissions Missing write access to /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters/node_modules

npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/alexa-cookie2/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/alexa-remote2/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/arr-diff/package.json'

npm

WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/arr-union/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/array-unique/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/assign-symbols/package.json'
npm WARN enoent
ENOENT: no such file or directory, open '/opt/iobroker/node_modules/atob/package.json'npm

WARN enoent
ENOENT: no such file or directory, open '/opt/iobroker/node_modules/base/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/braces/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/buffer/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/bufferhelper/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/cache-base/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/class-utils/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/decode-uri-component/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/dotenv/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/eventemitter3/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/expand-brackets/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/extglob/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/fill-range/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/fragment-cache/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/get-value/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/has-value/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/has-values/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/http-proxy/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/http-proxy-middleware/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/http-proxy-response-rewrite/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/https/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/ieee754/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.alexa2/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.hm-rega/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.hm-rpc/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.viessmann/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/is-glob/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/map-cache/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/micromatch/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/mixin-deep/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/nanomatch/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/nearest-color/package.json'
npm WARN enoent
ENOENT: no such file or directory, open '/opt/iobroker/node_modules/object.pick/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/pascalcase/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/posix-character-classes/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/querystring/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/regex-not/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/repeat-element/package.json'

npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/requires-port/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/resolve-url/package.json'
npm
WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/ret/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/safe-regex/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/snapdragon/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/snapdragon-node/package.json'

npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/snapdragon-util/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/source-map-resolve/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/source-map-url/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/split-string/package.json'
npm WARN
enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/ssh2/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/ssh2-streams/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/to-regex/package.json'
npm
WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/to-regex-range/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/union-value/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/unset-value/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/urix/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/use/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/virtual-device-sdk/package.json'

npm WARN svg-inline-react@1.0.3 requires a peer of react@^0.14.0 || ^15.0.0 but none is installed. You must install peer dependencies yourself.npm WARN bl@0.7.0 requires a peer of stream-browserify@* but none is installed. You must install peer dependencies yourself.

npm
ERR! path /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters/node_modules/debugnpm ERR! code EACCES
npm ERR! errno -13
npm ERR!
syscall access
npm ERR! Error: EACCES: permission denied, access '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters/node_modules/debug'npm ERR! { Error: EACCES: permission denied, access '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters/node_modules/debug'
npm ERR! stack: 'Error: EACCES: permission denied, access '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters/node_modules/debug'',
npm
ERR! errno: -13,npm ERR! code: 'EACCES',
npm ERR! syscall: 'access',
npm ERR! path: '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-shepherd-converters/node_modules/debug' }
npm ERR!
npm ERR! The operation was rejected by your operating system.
npm ERR! It is likely you do not have the permissions to access this file as the current user
npm ERR!
npm
ERR! If you believe this might be a permissions issue, please double-check thenpm ERR! permissions of the file and its containing directories, or try running
npm ERR! the command again as root/Administrator (though this is not recommended).

npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2019-12-27T17_08_55_516Z-debug.log

ERROR: host.Home Cannot install https://github.com/ioBroker/ioBroker.zigbee/tarball/herdsman: 243
ERROR: process exited with code 25

Habe das eben entdeckt muss man das Updaten??

[Jan1]

@matdos1gmx-de
Das ist der alte Contoller und sollte mal ein Update erhalten, dann steht im Log ständig was von "permission denied", könnte mal der Fixer richten und dann Code im Code Tag posten und nicht einfach rein kopieren.

[Matdos]

@Jan1

Ja deswegen Frage ich ja ob mir da eine Berechtigung fehlt.

Welchen Fixer? Was muss ich da machen?

Wie postet man im Code Tag?

MFG

[Jan1]

@matdos1gmx-de
Fixer in der Suche eingeben, wirst bestimmt schnell finden, da steht dann auch gleich die Erklärung dabei.
Code Tack ist das Symbol </>

[Matdos]

@Jan1

Alles klar beim Update vom JS Controller steht das auch mit dem Fixer jetzt hat nach dem Update (musste beim update auch den Fixer benutzen) auch die Installation von Zigbee funktioniert!!!

[Jan1]

@matdos1gmx-de
dann is ja alles gut

[Matdos]

@Jan1

Jup danke dir!

[Matdos]

Hm hab da was komisches, anlernen geht super schnell!!! Das ist mal Top!

Aber habe jetzt als erstes das EG angelernt und OG war gestoppt.

Danach EG gestoppt und OG angelernt damit sich die 2 nicht in die Quere kommen.

Dabei ist mir garnicht aufgefallen das beim anlernen von den OG Geräten gar keine Ordner erstellt werden, erst nachdem ich ein Script ändern wollte.

Die zwei Lampen wo jetzt im OG auftauchen ohne Ordner sind erschienen als ich die Spannung weg und wieder drauf gelegt habe mit einer Fehlermeldung.

Jetzt noch mal alle Geräte löschen und neu anleren?

Edit : habe jetzt alles noch mal neu angelernt, mit gestopptem EG Zigbee Stick.

Diesmal hat der Adapter die Ordner beim anlernen erstellt so weit so gut.

Nachdem ich das OG wieder fertig hatte lies sich der EG Stick nicht mehr starten, nach mehrmaligem Reset und Speichern und abziehen und wieder einstecken wurde er irgendwann wieder grün aber hatte alle Geräte aus dem EG verloren, sprich der grüne Haken war weg und das durchgestrichene Wlan Symbol war dafür da, was macht ihr da?? Ich habe alles gelöscht- Hard Reset und alles noch mal angelernt.

[Matdos]

@Asgothian

Ist das jetzt normal das gar kein Verbose State mehr da ist?

Wie muss ich jetzt Yahka konfigurieren, brauch ich gar kein Schript mehr?

Danke!

[Asgothian]

@matdos1gmx-de
Ein Script brauchst du Immer noch, allerdings nicht mehr mit 2 States. Es funktioniert jetzt so:

Wenn du den Befehl "abschliessen" geben willst, dann musst du "lock" in den state schreiben. Nach einer Zeit (wenn er abgeschlossen hat) sollte das Schloss dann mit "locked" antworten.
Das gleiche beim aufschliessen, nur mit "unlock"

A.