maxcul 1.1.0 mit Node10 support und mehr ...
-
@apollon77 Ich kann das leider nicht bestätigen. Habe einen Slave wo maxcul drauf läuft und diesen heute mal von 8 auf 10 gehoben. Im Adapter kann man nicht mehr den "Serial-Port" auswählen und deshalb wird der Adapter nicht grün. Kann aber auch mit einer anderen Kombination zu tun haben... nutze einen Proxmox LXC-Container. Nach einspielen des Backups mit Verision 8 läuft es wieder wie normal...
-
@iobroker_Alex das install log wäre da relevant und wichtig um zu sehen was genau los ist.
-
@apollon77 Kurz zum Aufbau:
Ich habe eine VM in Subnetz 1 (iobroker Master) und eine in Subnetz 2 (iobroker Slave). An der Slave hängt der cul-Stick. Hier läuft nodejs 8. Wenn ich nun den Slave stoppe, die Befehle ausführe um von nodejs 8 auf nodejs 10 upzudaten und iobroker wieder starte, bleibt der Adapter rot. Im Adapter selbst kann ich den "Serial-Port" nicht auswählen. Backup der vm zurück und alles ist wieder gut...
Meine Frage nun: Welchen Log brauchst du? Ich installiere den Adapter ja nicht neu, sondern Update nur "unter der Haube".
Beste Grüße
-
@iobroker_Alex die Anleitung hierin Forum wie man nodejs richtig updated und was dabei zu beachten ist kennst du scheinbar nicht. ...
Solltest du mal ansehen ;-))
https://forum.iobroker.net/topic/22867/how-to-node-js-für-iobroker-richtig-updaten
-
@apollon77 Doch genau nach dieser Anleitung habe ich Node10 aktualisiert. Welches Log brauchst du?
-
@iobroker_Alex am besten von dem npm rebuild oder welche Variante du auch gemacht hast. Und log vom Adapter Start
-
Auf dem Slave bekomme ich den Adapter mit Node10 nicht zum laufen. Auf dem Master kein Problem. Ist für mich aber so OK. Von daher ist die Aussage das Node10 mit dem Adapter läuft richtig. Falls noch jemand Probleme auf einem Slave mit Node10 hat, kann er es ja mal auf dem Master probieren. Danke dir für deine Hilfe und Anleitungen.
-
@iobroker_Alex Sorry aber das ist Blödsinn.
Master oder Slave ist dem Adapter egal. Was genau klappt denn auf deinem Slave nicht? Wo ist das log um was ich gebeten hatte? -
Eigentlich wollte ich dir keine Arbeit damit machen, da es für mich jetzt OK ist über den Master, aber OK!
Anbei der Log den ich aus Putty rausbekomme (der Text ist wohl zu lang, sodass Putty die ersten Zeilen schon nicht mehr anzeigt...):
-
Immer noch strange ... geh mal auf dem Slave ins Verzeichnis /opt/iobroker/node_modules/serialport und rufe da "npm install" auf ... Bitte log zeigen
-
Hat leider nicht geholfen. Anbei der Log:
root@iobrokerslave:~# cd /opt/iobroker/node_modules/serialport root@iobrokerslave:/opt/iobroker/node_modules/serialport# iobroker stop root@iobrokerslave:/opt/iobroker/node_modules/serialport# npm install npm WARN deprecated istanbul@0.4.5: This module is no longer maintained, try this instead: npm WARN deprecated npm i nyc npm WARN deprecated Visit https://istanbul.js.org/integrations for other alternatives. > serialport@6.2.2 install /opt/iobroker/node_modules/serialport > prebuild-install || node-gyp rebuild npm notice created a lockfile as package-lock.json. You should commit this file. added 702 packages from 1166 contributors and audited 2661 packages in 219.524s 16 packages are looking for funding run `npm fund` for details found 4 vulnerabilities (1 low, 3 high) run `npm audit fix` to fix them, or `npm audit` for details root@iobrokerslave:/opt/iobroker/node_modules/serialport# -
@iobroker_Alex sagte in maxcul 1.1.0 mit Node10 support und mehr ...:
6.2.2
Ok, dann falscher Pfad. Schau mal ob /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport existiert. Dann dort bitte nochmal ein npm rebuild und log posten
-
@apollon77 Frohe Weihnachten!
Keine Änderung:
root@iobrokerslave:~# iobroker stop root@iobrokerslave:~# cd /opt/iobroker/node_modules/iobroker.maxcul/node_modules /serialport root@iobrokerslave:/opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport# npm rebuild node-pre-gyp@0.6.32 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp mkdirp@0.5.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/mkdirp minimist@0.0.8 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/mkdirp/node_modules/minimist nopt@3.0.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/nopt abbrev@1.0.9 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/nopt/node_modules/abbrev npmlog@4.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog are-we-there-yet@1.1.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet delegates@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/delegates readable-stream@2.2.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/readable-stream buffer-shims@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/readable-stream/node_modules/buffer-shims core-util-is@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/readable-stream/node_modules/core-util-is inherits@2.0.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/readable-stream/node_modules/inherits isarray@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/readable-stream/node_modules/isarray process-nextick-args@1.0.7 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/readable-stream/node_modules/process-nextick-args string_decoder@0.10.31 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/readable-stream/node_modules/string_decoder util-deprecate@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/are-we-there-yet/node_modules/readable-stream/node_modules/util-deprecate console-control-strings@1.1.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/console-control-strings gauge@2.7.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge aproba@1.0.4 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/aproba has-unicode@2.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/has-unicode object-assign@4.1.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/object-assign signal-exit@3.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/signal-exit string-width@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/string-width code-point-at@1.1.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/string-width/node_modules/code-point-at is-fullwidth-code-point@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/string-width/node_modules/is-fullwidth-code-point number-is-nan@1.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/string-width/node_modules/is-fullwidth-code-point/node_modules/number-is-nan strip-ansi@3.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/strip-ansi ansi-regex@2.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/strip-ansi/node_modules/ansi-regex supports-color@0.2.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/supports-color wide-align@1.1.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/gauge/node_modules/wide-align set-blocking@2.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/npmlog/node_modules/set-blocking rc@1.1.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rc deep-extend@0.4.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rc/node_modules/deep-extend ini@1.3.4 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rc/node_modules/ini minimist@1.2.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rc/node_modules/minimist strip-json-comments@1.0.4 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rc/node_modules/strip-json-comments request@2.79.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request aws-sign2@0.6.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/aws-sign2 aws4@1.5.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/aws4 caseless@0.11.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/caseless combined-stream@1.0.5 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/combined-stream delayed-stream@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/combined-stream/node_modules/delayed-stream extend@3.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/extend forever-agent@0.6.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/forever-agent form-data@2.1.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/form-data asynckit@0.4.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/form-data/node_modules/asynckit mime-types@2.1.13 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/mime-types mime-db@1.25.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/mime-types/node_modules/mime-db har-validator@2.0.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator chalk@1.1.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/chalk ansi-styles@2.2.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/chalk/node_modules/ansi-styles escape-string-regexp@1.0.5 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/chalk/node_modules/escape-string-regexp has-ansi@2.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/chalk/node_modules/has-ansi ansi-regex@2.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/chalk/node_modules/has-ansi/node_modules/ansi-regex strip-ansi@3.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/chalk/node_modules/strip-ansi ansi-regex@2.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/chalk/node_modules/strip-ansi/node_modules/ansi-regex supports-color@2.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/chalk/node_modules/supports-color is-my-json-valid@2.15.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/is-my-json-valid generate-function@2.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/is-my-json-valid/node_modules/generate-function generate-object-property@1.2.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/is-my-json-valid/node_modules/generate-object-property is-property@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/is-my-json-valid/node_modules/generate-object-property/node_modules/is-property jsonpointer@4.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/is-my-json-valid/node_modules/jsonpointer xtend@4.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/is-my-json-valid/node_modules/xtend pinkie-promise@2.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/pinkie-promise pinkie@2.0.4 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/har-validator/node_modules/pinkie-promise/node_modules/pinkie hawk@3.1.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/hawk boom@2.10.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/hawk/node_modules/boom hoek@2.16.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/hawk/node_modules/hoek cryptiles@2.0.5 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/hawk/node_modules/cryptiles sntp@1.0.9 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/hawk/node_modules/sntp http-signature@1.1.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature assert-plus@0.2.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/assert-plus jsprim@1.3.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/jsprim extsprintf@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/jsprim/node_modules/extsprintf json-schema@0.2.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/jsprim/node_modules/json-schema verror@1.3.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/jsprim/node_modules/verror sshpk@1.10.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk asn1@0.2.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/asn1 assert-plus@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/assert-plus bcrypt-pbkdf@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/bcrypt-pbkdf tweetnacl@0.14.4 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/tweetnacl dashdash@1.14.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/dashdash ecc-jsbn@0.1.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/ecc-jsbn jsbn@0.1.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/jsbn getpass@0.1.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/getpass jodid25519@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/http-signature/node_modules/sshpk/node_modules/jodid25519 is-typedarray@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/is-typedarray isstream@0.1.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/isstream json-stringify-safe@5.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/json-stringify-safe oauth-sign@0.8.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/oauth-sign qs@6.3.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/qs stringstream@0.0.5 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/stringstream tough-cookie@2.3.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/tough-cookie punycode@1.4.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/tough-cookie/node_modules/punycode tunnel-agent@0.4.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/tunnel-agent uuid@3.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/request/node_modules/uuid rimraf@2.5.4 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf glob@7.1.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob fs.realpath@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/fs.realpath inflight@1.0.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/inflight once@1.4.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/once wrappy@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/once/node_modules/wrappy wrappy@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/inflight/node_modules/wrappy inherits@2.0.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/inherits minimatch@3.0.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/minimatch brace-expansion@1.1.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/minimatch/node_modules/brace-expansion balanced-match@0.4.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/minimatch/node_modules/brace-expansion/node_modules/balanced-match concat-map@0.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/minimatch/node_modules/brace-expansion/node_modules/concat-map path-is-absolute@1.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/rimraf/node_modules/glob/node_modules/path-is-absolute semver@5.3.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/semver tar@2.2.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar block-stream@0.0.9 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar/node_modules/block-stream inherits@2.0.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar/node_modules/inherits fstream@1.0.10 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar/node_modules/fstream graceful-fs@4.1.11 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar/node_modules/fstream/node_modules/graceful-fs tar-pack@3.3.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack debug@2.2.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/debug ms@0.7.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/debug/node_modules/ms fstream@1.0.10 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream graceful-fs@4.1.11 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream/node_modules/graceful-fs inherits@2.0.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream/node_modules/inherits fstream-ignore@1.0.5 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream-ignore inherits@2.0.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream-ignore/node_modules/inherits minimatch@3.0.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream-ignore/node_modules/minimatch brace-expansion@1.1.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream-ignore/node_modules/minimatch/node_modules/brace-expansion balanced-match@0.4.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream-ignore/node_modules/minimatch/node_modules/brace-expansion/node_modules/balanced-match concat-map@0.0.1 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/fstream-ignore/node_modules/minimatch/node_modules/brace-expansion/node_modules/concat-map once@1.3.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/once wrappy@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/once/node_modules/wrappy readable-stream@2.1.5 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/readable-stream buffer-shims@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/readable-stream/node_modules/buffer-shims core-util-is@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/readable-stream/node_modules/core-util-is inherits@2.0.3 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/readable-stream/node_modules/inherits isarray@1.0.0 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/readable-stream/node_modules/isarray process-nextick-args@1.0.7 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/readable-stream/node_modules/process-nextick-args string_decoder@0.10.31 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/readable-stream/node_modules/string_decoder util-deprecate@1.0.2 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/readable-stream/node_modules/util-deprecate uid-number@0.0.6 /opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport/node_modules/node-pre-gyp/node_modules/tar-pack/node_modules/uid-number root@iobrokerslave:/opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport# iobroker start root@iobrokerslave:/opt/iobroker/node_modules/iobroker.maxcul/node_modules/serialport# -
@iobroker_Alex ok next try: geh in /opt/iobroker/node_modules/iobroker.maxcul
Und dort hin ein
npm i serialport@7.1.5
Ausgabe bitte zeigen.
-
@apollon77
Ok, geht aber immernoch nicht:root@iobrokerslave:~# iobroker stop root@iobrokerslave:~# cd /opt/iobroker/node_modules/iobroker.maxcul root@iobrokerslave:/opt/iobroker/node_modules/iobroker.maxcul# npm i serialport@7.1.5 > @serialport/bindings@2.0.8 install /opt/iobroker/node_modules/iobroker.maxcul/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild npm notice created a lockfile as package-lock.json. You should commit this file. + serialport@7.1.5 added 53 packages from 40 contributors, removed 120 packages, updated 2 packages, moved 18 packages and audited 129 packages in 4.714s found 0 vulnerabilities root@iobrokerslave:/opt/iobroker/node_modules/iobroker.maxcul# iobroker start root@iobrokerslave:/opt/iobroker/node_modules/iobroker.maxcul# -
Dann stell mal auf debug und zeig log vom Start bitte.
-
Und zeig mal
ls -la /dev/serial/by-id/
-
@apollon77
Gerne:root@iobrokerslave:~# ls -la /dev/serial/by-id/ ls: cannot access '/dev/serial/by-id/': No such file or directoryUnd der log (erst Debug ein (Master = Debian-iobroker), dann den Adapter auf den Slave (iobrokerslave) geschoben):
host.iobrokerslave 2019-12-26 11:21:17.844 info instance system.adapter.maxcul.0 started with pid 9667 host.iobrokerslave 2019-12-26 11:20:47.835 info Restart adapter system.adapter.maxcul.0 because enabled host.iobrokerslave 2019-12-26 11:20:47.835 info instance system.adapter.maxcul.0 terminated with code 0 (NO_ERROR) host.iobrokerslave 2019-12-26 11:20:47.835 error Caught by controller[0]: at process._tickCallback (internal/process/next_tick.js:68:7) host.iobrokerslave 2019-12-26 11:20:47.835 error Caught by controller[0]: at promise.then (/opt/iobroker/node_modules/standard-as-callback/built/index.js:19:49) host.iobrokerslave 2019-12-26 11:20:47.835 error Caught by controller[0]: at tryCatcher (/opt/iobroker/node_modules/standard-as-callback/built/utils.js:11:23) host.iobrokerslave 2019-12-26 11:20:47.835 error Caught by controller[0]: at (anonymous function).(anonymous function) (/opt/iobroker/node_modules/iobroker.objects-redis/index.js:1:96801) host.iobrokerslave 2019-12-26 11:20:47.835 error Caught by controller[0]: at adapter.objects.getObjectView (/opt/iobroker/node_modules/iobroker.maxcul/main.js:1394:13) host.iobrokerslave 2019-12-26 11:20:47.835 error Caught by controller[0]: at connect (/opt/iobroker/node_modules/iobroker.maxcul/main.js:1114:11) host.iobrokerslave 2019-12-26 11:20:47.834 error Caught by controller[0]: at new MaxDriver (/opt/iobroker/node_modules/iobroker.maxcul/lib/maxcul.js:42:29) host.iobrokerslave 2019-12-26 11:20:47.834 error Caught by controller[0]: at new CommunicationServiceLayer (/opt/iobroker/node_modules/iobroker.maxcul/lib/communication-layer.js:38:44) host.iobrokerslave 2019-12-26 11:20:47.834 error Caught by controller[0]: TypeError: SerialPort.parsers.readline is not a function maxcul.0 2019-12-26 11:20:47.205 info (9652) Terminated (NO_ERROR): Without reason maxcul.0 2019-12-26 11:20:47.203 info (9652) terminating maxcul.0 2019-12-26 11:20:47.196 error (9652) TypeError: SerialPort.parsers.readline is not a function at new CommunicationServiceLayer (/opt/iobroker/node_modules/iobroker.maxcul/lib/communication-layer.js:38:44) at new MaxDriver maxcul.0 2019-12-26 11:20:47.195 error (9652) uncaught exception: SerialPort.parsers.readline is not a function maxcul.0 2019-12-26 11:20:47.189 info (9652) using serial device /dev/ttyUSB1@38400 maxcul.0 2019-12-26 11:20:47.011 info (9652) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.maxcul, node: v10.18.0 host.iobrokerslave 2019-12-26 11:20:45.524 info instance system.adapter.maxcul.0 started with pid 9652 host.iobrokerslave 2019-12-26 11:20:15.516 info Restart adapter system.adapter.maxcul.0 because enabled host.iobrokerslave 2019-12-26 11:20:15.516 info instance system.adapter.maxcul.0 terminated with code 0 (NO_ERROR) host.iobrokerslave 2019-12-26 11:20:15.516 error Caught by controller[0]: at process._tickCallback (internal/process/next_tick.js:68:7) host.iobrokerslave 2019-12-26 11:20:15.516 error Caught by controller[0]: at promise.then (/opt/iobroker/node_modules/standard-as-callback/built/index.js:19:49) host.iobrokerslave 2019-12-26 11:20:15.516 error Caught by controller[0]: at tryCatcher (/opt/iobroker/node_modules/standard-as-callback/built/utils.js:11:23) host.iobrokerslave 2019-12-26 11:20:15.516 error Caught by controller[0]: at (anonymous function).(anonymous function) (/opt/iobroker/node_modules/iobroker.objects-redis/index.js:1:96801) host.iobrokerslave 2019-12-26 11:20:15.515 error Caught by controller[0]: at adapter.objects.getObjectView (/opt/iobroker/node_modules/iobroker.maxcul/main.js:1394:13) host.iobrokerslave 2019-12-26 11:20:15.514 error Caught by controller[0]: at connect (/opt/iobroker/node_modules/iobroker.maxcul/main.js:1114:11) host.iobrokerslave 2019-12-26 11:20:15.514 error Caught by controller[0]: at new MaxDriver (/opt/iobroker/node_modules/iobroker.maxcul/lib/maxcul.js:42:29) host.iobrokerslave 2019-12-26 11:20:15.514 error Caught by controller[0]: at new CommunicationServiceLayer (/opt/iobroker/node_modules/iobroker.maxcul/lib/communication-layer.js:38:44) host.iobrokerslave 2019-12-26 11:20:15.513 error Caught by controller[0]: TypeError: SerialPort.parsers.readline is not a function maxcul.0 2019-12-26 11:20:14.894 info (9637) Terminated (NO_ERROR): Without reason maxcul.0 2019-12-26 11:20:14.893 info (9637) terminating maxcul.0 2019-12-26 11:20:14.887 error (9637) TypeError: SerialPort.parsers.readline is not a function at new CommunicationServiceLayer (/opt/iobroker/node_modules/iobroker.maxcul/lib/communication-layer.js:38:44) at new MaxDriver maxcul.0 2019-12-26 11:20:14.886 error (9637) uncaught exception: SerialPort.parsers.readline is not a function maxcul.0 2019-12-26 11:20:14.881 info (9637) using serial device /dev/ttyUSB1@38400 maxcul.0 2019-12-26 11:20:14.729 info (9637) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.maxcul, node: v10.18.0 host.iobrokerslave 2019-12-26 11:20:13.320 info instance system.adapter.maxcul.0 started with pid 9637 host.iobrokerslave 2019-12-26 11:19:43.312 info Restart adapter system.adapter.maxcul.0 because enabled host.iobrokerslave 2019-12-26 11:19:43.312 info instance system.adapter.maxcul.0 terminated with code 0 (NO_ERROR) host.iobrokerslave 2019-12-26 11:19:43.312 error Caught by controller[0]: at process._tickCallback (internal/process/next_tick.js:68:7) host.iobrokerslave 2019-12-26 11:19:43.312 error Caught by controller[0]: at promise.then (/opt/iobroker/node_modules/standard-as-callback/built/index.js:19:49) host.iobrokerslave 2019-12-26 11:19:43.312 error Caught by controller[0]: at tryCatcher (/opt/iobroker/node_modules/standard-as-callback/built/utils.js:11:23) host.iobrokerslave 2019-12-26 11:19:43.311 error Caught by controller[0]: at (anonymous function).(anonymous function) (/opt/iobroker/node_modules/iobroker.objects-redis/index.js:1:96801) host.iobrokerslave 2019-12-26 11:19:43.311 error Caught by controller[0]: at adapter.objects.getObjectView (/opt/iobroker/node_modules/iobroker.maxcul/main.js:1394:13) host.iobrokerslave 2019-12-26 11:19:43.311 error Caught by controller[0]: at connect (/opt/iobroker/node_modules/iobroker.maxcul/main.js:1114:11) host.iobrokerslave 2019-12-26 11:19:43.311 error Caught by controller[0]: at new MaxDriver (/opt/iobroker/node_modules/iobroker.maxcul/lib/maxcul.js:42:29) host.iobrokerslave 2019-12-26 11:19:43.311 error Caught by controller[0]: at new CommunicationServiceLayer (/opt/iobroker/node_modules/iobroker.maxcul/lib/communication-layer.js:38:44) host.iobrokerslave 2019-12-26 11:19:43.311 error Caught by controller[0]: TypeError: SerialPort.parsers.readline is not a function maxcul.0 2019-12-26 11:19:42.668 info (9622) Terminated (NO_ERROR): Without reason maxcul.0 2019-12-26 11:19:42.667 info (9622) terminating maxcul.0 2019-12-26 11:19:42.661 error (9622) TypeError: SerialPort.parsers.readline is not a function at new CommunicationServiceLayer (/opt/iobroker/node_modules/iobroker.maxcul/lib/communication-layer.js:38:44) at new MaxDriver maxcul.0 2019-12-26 11:19:42.661 error (9622) uncaught exception: SerialPort.parsers.readline is not a function maxcul.0 2019-12-26 11:19:42.656 info (9622) using serial device /dev/ttyUSB1@38400 maxcul.0 2019-12-26 11:19:42.491 info (9622) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.maxcul, node: v10.18.0 host.Debian-iobroker 2019-12-26 11:19:38.811 info Do not restart adapter system.adapter.maxcul.0 because disabled or deleted host.Debian-iobroker 2019-12-26 11:19:38.811 error instance system.adapter.maxcul.0 terminated with code 156 (156) maxcul.0 2019-12-26 11:19:38.587 debug (26748) enable MAX! Mode of the CUL868 maxcul.0 2019-12-26 11:19:38.280 info (26748) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason maxcul.0 2019-12-26 11:19:38.279 info (26748) terminating maxcul.0 2019-12-26 11:19:38.278 info (26748) Got terminate signal TERMINATE_YOURSELF host.Debian-iobroker 2019-12-26 11:19:38.275 info stopInstance system.adapter.maxcul.0 send kill signal host.Debian-iobroker 2019-12-26 11:19:38.273 info stopInstance system.adapter.maxcul.0 (force=false, process=true) maxcul.0 2019-12-26 11:19:37.581 debug (26748) delayed next send by 0ms (Queue length left = 0, Current Credit = 0) maxcul.0 2019-12-26 11:19:37.580 debug (26748) serial port buffer have been drained maxcul.0 2019-12-26 11:19:37.579 debug (26748) Send Packet to CUL: X, awaiting drain event maxcul.0 2019-12-26 11:19:34.607 info (26748) CUL FW Version: V 1.67 nanoCUL868 maxcul.0 2019-12-26 11:19:34.606 debug (26748) incoming raw data from CUL: V 1.67 nanoCUL868 maxcul.0 2019-12-26 11:19:34.586 debug (26748) Requested CUL Version... maxcul.0 2019-12-26 11:19:34.584 debug (26748) check CUL Firmware version maxcul.0 2019-12-26 11:19:32.583 info (26748) serialPort /dev/ttyUSB1 is open! maxcul.0 2019-12-26 11:19:32.575 info (26748) using serial device /dev/ttyUSB1@38400 maxcul.0 2019-12-26 11:19:32.399 info (26748) starting. Version 1.1.2 in /opt/iobroker/node_modules/iobroker.maxcul, node: v10.16.3 maxcul.0 2019-12-26 11:19:31.419 debug (26748) States connected to redis: 10.4.4.13:6379 maxcul.0 2019-12-26 11:19:31.418 debug (26748) Objects connected to redis: 0.0.0.0:9001 maxcul.0 2019-12-26 11:19:31.413 debug (26748) statesDB connected maxcul.0 2019-12-26 11:19:31.412 debug (26748) States create PubSub Client maxcul.0 2019-12-26 11:19:31.408 debug (26748) Redis States: Use Redis connection: 10.4.4.13:6379 maxcul.0 2019-12-26 11:19:31.407 debug (26748) objectDB connected maxcul.0 2019-12-26 11:19:31.400 debug (26748) Objects client initialize lua scripts maxcul.0 2019-12-26 11:19:31.400 debug (26748) Objects create PubSub Client maxcul.0 2019-12-26 11:19:31.398 debug (26748) Objects client ready ... initialize now maxcul.0 2019-12-26 11:19:31.367 debug (26748) Redis Objects: Use Redis connection: 0.0.0.0:9001 host.Debian-iobroker 2019-12-26 11:19:30.881 info instance system.adapter.maxcul.0 started with pid 26748 host.Debian-iobroker 2019-12-26 11:19:28.889 info instance system.adapter.maxcul.0 terminated with code 156 (156) maxcul.0 2019-12-26 11:19:28.357 info (24564) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason maxcul.0 2019-12-26 11:19:28.356 info (24564) terminating maxcul.0 2019-12-26 11:19:28.355 info (24564) Got terminate signal TERMINATE_YOURSELF host.Debian-iobroker 2019-12-26 11:19:28.354 info stopInstance system.adapter.maxcul.0 send kill signal host.Debian-iobroker 2019-12-26 11:19:28.353 info stopInstance system.adapter.maxcul.0 (force=false, process=true) -
Äääähhmmmm ... also auf Slave hängt der Stick dran und es tut? Und wenn der Adapter am Master läuft tut es nicht? Auf dem Master scheint es gar keinen Stick an /dev/ttyUSB0 zu geben ?! Wie soll der Adapter dann tun ? Oder was vermisse ich gerade?
