Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. Error/Bug
  4. Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.7k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.2k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    16
    1
    3.2k

Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter

Geplant Angeheftet Gesperrt Verschoben Ungelöst Error/Bug
fhem.0
63 Beiträge 8 Kommentatoren 5.0k Aufrufe 4 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • AlCalzoneA AlCalzone

    @Altersrentner sagte in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

    pi@ioBroker-RasPi:~ $ node -v
    v11.12.0

    Kommando zurück, erst auf eine unterstützte Node-Version (8.x oder 10.x) downgraden! Ungerade Versionen sind Entwicklerversionen und sollten nicht genutzt werden!

    A Offline
    A Offline
    Altersrentner
    schrieb am zuletzt editiert von
    #37

    @AlCalzone Danke für die Nachricht.
    Habe jetzt n 8.15.1 installiert.
    "Da steht eigentlich alles was du wissen musst."
    Bitte entschuldige; wenn ich es wüsste würde ich nicht fragen.
    Jetzt wieder diese Fehler und es geht um Zigbee. der Adapter ist aber aktualisiert v 0.10.2.

    
    host.ioBroker-RasPi	2019-03-18 10:46:16.725	info	Restart adapter system.adapter.zigbee.0 because enabled
    host.ioBroker-RasPi	2019-03-18 10:46:16.725	error	instance system.adapter.zigbee.0 terminated with code 1 ()
    host.ioBroker-RasPi	2019-03-18 10:46:16.724	error	Caught by controller[0]: at Object.Module._extensions..js (module.js:664:10)
    host.ioBroker-RasPi	2019-03-18 10:46:16.723	error	Caught by controller[0]: at Module._compile (module.js:653:30)
    host.ioBroker-RasPi	2019-03-18 10:46:16.723	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/serialport/lib/bindings/linux.js:2:36)
    host.ioBroker-RasPi	2019-03-18 10:46:16.722	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/bindings/bindings.js:81:44)
    host.ioBroker-RasPi	2019-03-18 10:46:16.721	error	Caught by controller[0]: at require (internal/module.js:11:18)
    host.ioBroker-RasPi	2019-03-18 10:46:16.721	error	Caught by controller[0]: at Module.require (module.js:597:17)
    host.ioBroker-RasPi	2019-03-18 10:46:16.720	error	Caught by controller[0]: at Function.Module._load (module.js:498:3)
    host.ioBroker-RasPi	2019-03-18 10:46:16.720	error	Caught by controller[0]: at tryModuleLoad (module.js:506:12)
    host.ioBroker-RasPi	2019-03-18 10:46:16.719	error	Caught by controller[0]: at Module.load (module.js:566:32)
    host.ioBroker-RasPi	2019-03-18 10:46:16.718	error	Caught by controller[0]: at Object.Module._extensions..node (module.js:682:18)
    host.ioBroker-RasPi	2019-03-18 10:46:16.718	error	Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`).
    host.ioBroker-RasPi	2019-03-18 10:46:16.717	error	Caught by controller[0]: NODE_MODULE_VERSION 57. Please try re-compiling or re-installing
    host.ioBroker-RasPi	2019-03-18 10:46:16.716	error	Caught by controller[0]: NODE_MODULE_VERSION 67. This version of Node.js requires
    host.ioBroker-RasPi	2019-03-18 10:46:16.716	error	Caught by controller[0]: was compiled against a different Node.js version using
    host.ioBroker-RasPi	2019-03-18 10:46:16.715	error	Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/serialport/build/Release/serialport.node'
    host.ioBroker-RasPi	2019-03-18 10:46:16.714	error	Caught by controller[0]: ^
    host.ioBroker-RasPi	2019-03-18 10:46:16.714	error	Caught by controller[0]: throw e
    host.ioBroker-RasPi	2019-03-18 10:46:16.713	error	Caught by controller[0]: /opt/iobroker/node_modules/iobroker.zigbee/node_modules/bindings/bindings.js:88
    host.ioBroker-RasPi	2019-03-18 10:46:15.708	info	instance system.adapter.zigbee.0 started with pid 25054
    host.ioBroker-RasPi	2019-03-18 10:45:45.687	info	Restart adapter system.adapter.zigbee.0 because enabled
    

    Gruß Michael

    1 Antwort Letzte Antwort
    0
    • A Offline
      A Offline
      Altersrentner
      schrieb am zuletzt editiert von
      #38

      Übrigens der Zigbee Adapter läuft nicht. Aller Startversuche scheitern,

      1 Antwort Letzte Antwort
      0
      • AlCalzoneA Offline
        AlCalzoneA Offline
        AlCalzone
        Developer
        schrieb am zuletzt editiert von
        #39

        Da steht ja auch immer noch der gleiche Fehler. Hast du die Befehle mal ausgeführt? Wenn ja, was war die Ausgabe davon?
        Kann auch sein, dass du npm rebuild im Ordner /opt/iobroker/node_modules/iobroker.zigbee/node_modules/serialport ausführen musst.

        Warum `sudo` böse ist: https://forum.iobroker.net/post/17109

        1 Antwort Letzte Antwort
        0
        • A Offline
          A Offline
          Altersrentner
          schrieb am zuletzt editiert von Negalein
          #40

          @AlCalzone said in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

          Hast du die Befehle mal ausgeführt

          Welche Befehle?

          AlCalzoneA 1 Antwort Letzte Antwort
          0
          • A Altersrentner

            @AlCalzone said in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

            Hast du die Befehle mal ausgeführt

            Welche Befehle?

            AlCalzoneA Offline
            AlCalzoneA Offline
            AlCalzone
            Developer
            schrieb am zuletzt editiert von
            #41

            @Altersrentner Na die aus meinem Post, auf den du dich vorhin bezogen hast:

            44fc37ee-a004-49f1-9d27-0a61356187a3-grafik.png

            Warum `sudo` böse ist: https://forum.iobroker.net/post/17109

            A 1 Antwort Letzte Antwort
            0
            • AlCalzoneA AlCalzone

              @Altersrentner Na die aus meinem Post, auf den du dich vorhin bezogen hast:

              44fc37ee-a004-49f1-9d27-0a61356187a3-grafik.png

              A Offline
              A Offline
              Altersrentner
              schrieb am zuletzt editiert von
              #42

              @AlCalzone habe npm rebuiild ausgeführt.
              Nun sieht es im Log schon besser aus.
              Leider läuft der Zigbee Adapter nur mit gelb.
              Laut Log muss der serielle Port eingestellt werden.

              
              zigbee.0	2019-03-18 12:41:51.036	error	Serial port not selected! Go to settings page.
              zigbee.0	2019-03-18 12:41:51.029	info	starting. Version 0.10.2 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.15.1
              zigbee.0	2019-03-18 12:41:49.914	info	States connected to redis: 127.0.0.1:6379
              host.ioBroker-RasPi	2019-03-18 12:41:48.235	info	instance system.adapter.zigbee.0 started with pid 311
              host.ioBroker-RasPi	2019-03-18 12:41:48.209	info	object change system.adapter.zigbee.0
              host.ioBroker-RasPi	2019-03-18 12:41:46.747	info	instance system.adapter.zigbee.0 terminated with code 0 (OK)
              host.ioBroker-RasPi	2019-03-18 12:41:46.640	info	stopInstance system.adapter.zigbee.0 killing pid 32677
              host.ioBroker-RasPi	2019-03-18 12:41:46.640	info	stopInstance system.adapter.zigbee.0
              host.ioBroker-RasPi	2019-03-18 12:41:46.639	info	object change system.adapter.zigbee.0
              zigbee.0	2019-03-18 12:40:44.196	error	Serial port not selected! Go to settings page.
              
              

              Kann das an der node v 8.15.1 liegen?

              AlCalzoneA 1 Antwort Letzte Antwort
              0
              • A Altersrentner

                @AlCalzone habe npm rebuiild ausgeführt.
                Nun sieht es im Log schon besser aus.
                Leider läuft der Zigbee Adapter nur mit gelb.
                Laut Log muss der serielle Port eingestellt werden.

                
                zigbee.0	2019-03-18 12:41:51.036	error	Serial port not selected! Go to settings page.
                zigbee.0	2019-03-18 12:41:51.029	info	starting. Version 0.10.2 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.15.1
                zigbee.0	2019-03-18 12:41:49.914	info	States connected to redis: 127.0.0.1:6379
                host.ioBroker-RasPi	2019-03-18 12:41:48.235	info	instance system.adapter.zigbee.0 started with pid 311
                host.ioBroker-RasPi	2019-03-18 12:41:48.209	info	object change system.adapter.zigbee.0
                host.ioBroker-RasPi	2019-03-18 12:41:46.747	info	instance system.adapter.zigbee.0 terminated with code 0 (OK)
                host.ioBroker-RasPi	2019-03-18 12:41:46.640	info	stopInstance system.adapter.zigbee.0 killing pid 32677
                host.ioBroker-RasPi	2019-03-18 12:41:46.640	info	stopInstance system.adapter.zigbee.0
                host.ioBroker-RasPi	2019-03-18 12:41:46.639	info	object change system.adapter.zigbee.0
                zigbee.0	2019-03-18 12:40:44.196	error	Serial port not selected! Go to settings page.
                
                

                Kann das an der node v 8.15.1 liegen?

                AlCalzoneA Offline
                AlCalzoneA Offline
                AlCalzone
                Developer
                schrieb am zuletzt editiert von
                #43

                @Altersrentner sagte in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

                Laut Log muss der serielle Port eingestellt werden.

                Na, dann mach das doch ;)

                Warum `sudo` böse ist: https://forum.iobroker.net/post/17109

                A 2 Antworten Letzte Antwort
                0
                • AlCalzoneA AlCalzone

                  @Altersrentner sagte in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

                  Laut Log muss der serielle Port eingestellt werden.

                  Na, dann mach das doch ;)

                  A Offline
                  A Offline
                  Altersrentner
                  schrieb am zuletzt editiert von
                  #44

                  @AlCalzone ist gemacht, :ok_hand:

                  /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0012013B01-if00 
                  

                  mal sehen was um 04:00 passiert
                  Danke
                  Gruß Michael

                  1 Antwort Letzte Antwort
                  0
                  • AlCalzoneA AlCalzone

                    @Altersrentner sagte in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

                    Laut Log muss der serielle Port eingestellt werden.

                    Na, dann mach das doch ;)

                    A Offline
                    A Offline
                    Altersrentner
                    schrieb am zuletzt editiert von
                    #45

                    @AlCalzone Hallo,
                    Die Situation nach Aktualisierung ist hinsichtlich Stopp um 04:00 ist unverändert.

                    9-03-19 03:55:21.199 - warn: fhem.0 Reconnection to DB.
                    2019-03-19 03:56:36.377 - info: fhem.0 event ioBroker "fhem.0.GewaechshausLED_Ventilation.state_switch on" > set GewaechshausLED_Ventilation on
                    2019-03-19 03:56:37.375 - info: fhem.0 event ioBroker "fhem.0.Ventilation.state_switch on" > set Ventilation on
                    2019-03-19 03:58:52.860 - info: fhem.0 event ioBroker "fhem.0.VentilWandhzg_HK2.state_switch off" > set VentilWandhzg_HK2 off
                    2019-03-19 03:59:24.444 - info: fhem.0 event ioBroker "fhem.0.GewaechshausLED_Ventilation.state_switch on" > set GewaechshausLED_Ventilation on
                    2019-03-19 03:59:25.443 - info: fhem.0 event ioBroker "fhem.0.Ventilation.state_switch on" > set Ventilation on
                    2019-03-19 04:00:00.030 - info: host.ioBroker-RasPi instance system.adapter.dwd.0 started with pid 8325
                    2019-03-19 04:00:01.841 - info: dwd.0 States connected to redis: 127.0.0.1:6379
                    2019-03-19 04:00:02.006 - info: dwd.0 starting. Version 2.4.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v8.15.1
                    2019-03-19 04:00:02.913 - info: host.ioBroker-RasPi received SIGTERM
                    2019-03-19 04:00:02.932 - info: web.0 terminating http server on port 8082
                    2019-03-19 04:00:02.932 - info: web.0 terminated http server on port 8082
                    2019-03-19 04:00:02.937 - info: admin.0 terminating http server on port 8081
                    2019-03-19 04:00:02.946 - info: web.0 terminating http server on port 8082
                    2019-03-19 04:00:02.972 - info: terminal.0 terminating http server on port 8088
                    2019-03-19 04:00:02.976 - info: terminal.0 terminated http server on port 8088
                    2019-03-19 04:00:02.985 - info: terminal.0 terminating http server on port 8088
                    2019-03-19 04:00:02.984 - info: admin.0 terminating http server on port 8081
                    2019-03-19 04:00:02.918 - info: host.ioBroker-RasPi stopInstance system.adapter.admin.0
                    2019-03-19 04:00:02.919 - info: host.ioBroker-RasPi stopInstance system.adapter.admin.0 killing pid 993
                    2019-03-19 04:00:02.919 - info: host.ioBroker-RasPi stopInstance system.adapter.discovery.0
                    2019-03-19 04:00:02.920 - info: host.ioBroker-RasPi stopInstance system.adapter.discovery.0 killing pid 1004
                    2019-03-19 04:00:02.923 - info: host.ioBroker-RasPi stopInstance system.adapter.web.0
                    2019-03-19 04:00:02.924 - info: host.ioBroker-RasPi stopInstance system.adapter.web.0 killing pid 1014
                    2019-03-19 04:00:02.924 - info: host.ioBroker-RasPi stopInstance system.adapter.rpi2.0
                    2019-03-19 04:00:02.925 - info: host.ioBroker-RasPi stopInstance system.adapter.rpi2.0 killing pid 1024
                    2019-03-19 04:00:02.925 - info: host.ioBroker-RasPi stopInstance system.adapter.socketio.0
                    2019-03-19 04:00:02.927 - info: host.ioBroker-RasPi stopInstance system.adapter.socketio.0 killing pid 1034
                    2019-03-19 04:00:02.929 - info: host.ioBroker-RasPi stopInstance system.adapter.vis.0
                    2019-03-19 04:00:02.931 - info: host.ioBroker-RasPi stopInstance system.adapter.history.0
                    2019-03-19 04:00:02.934 - info: host.ioBroker-RasPi stopInstance system.adapter.javascript.0
                    2019-03-19 04:00:02.935 - info: host.ioBroker-RasPi stopInstance system.adapter.javascript.0 killing pid 1295
                    2019-03-19 04:00:02.939 - info: host.ioBroker-RasPi stopInstance system.adapter.cul.0
                    2019-03-19 04:00:02.940 - info: host.ioBroker-RasPi stopInstance system.adapter.cul.0 killing pid 1122
                    2019-03-19 04:00:02.941 - info: host.ioBroker-RasPi stopInstance system.adapter.fhem.0
                    2019-03-19 04:00:02.944 - info: host.ioBroker-RasPi stopInstance system.adapter.fhem.0 killing pid 2575
                    2019-03-19 04:00:02.956 - info: host.ioBroker-RasPi stopInstance system.adapter.javascript.1
                    2019-03-19 04:00:02.957 - info: host.ioBroker-RasPi stopInstance system.adapter.javascript.1 killing pid 1146
                    2019-03-19 04:00:02.958 - info: host.ioBroker-RasPi stopInstance system.adapter.mihome-vacuum.0
                    2019-03-19 04:00:02.958 - info: host.ioBroker-RasPi stopInstance system.adapter.mihome-vacuum.0 killing pid 1157
                    2019-03-19 04:00:02.961 - info: host.ioBroker-RasPi stopInstance system.adapter.mihome.0
                    2019-03-19 04:00:02.962 - info: host.ioBroker-RasPi stopInstance system.adapter.mihome.0 killing pid 1167
                    2019-03-19 04:00:02.962 - info: host.ioBroker-RasPi stopInstance system.adapter.scenes.0
                    2019-03-19 04:00:02.962 - info: host.ioBroker-RasPi stopInstance system.adapter.scenes.0 killing pid 1180
                    2019-03-19 04:00:02.966 - info: host.ioBroker-RasPi stopInstance system.adapter.terminal.0
                    2019-03-19 04:00:02.967 - info: host.ioBroker-RasPi stopInstance system.adapter.terminal.0 killing pid 1181
                    2019-03-19 04:00:02.967 - info: host.ioBroker-RasPi stopInstance system.adapter.harmony.0
                    2019-03-19 04:00:02.967 - warn: host.ioBroker-RasPi stopInstance system.adapter.harmony.0 not running
                    2019-03-19 04:00:02.968 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-hqwidgets.0
                    2019-03-19 04:00:02.968 - info: host.ioBroker-RasPi stopInstance system.adapter.alexa2.0
                    2019-03-19 04:00:02.968 - warn: host.ioBroker-RasPi stopInstance system.adapter.alexa2.0 not running
                    2019-03-19 04:00:02.968 - info: host.ioBroker-RasPi stopInstance system.adapter.tr-064.0
                    2019-03-19 04:00:02.969 - info: host.ioBroker-RasPi stopInstance system.adapter.tr-064.0 killing pid 1182
                    2019-03-19 04:00:02.969 - info: host.ioBroker-RasPi stopInstance system.adapter.cloud.0
                    2019-03-19 04:00:02.970 - warn: host.ioBroker-RasPi stopInstance system.adapter.cloud.0 not running
                    2019-03-19 04:00:02.970 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-timeandweather.0
                    2019-03-19 04:00:02.970 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-weather.0
                    2019-03-19 04:00:02.975 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-metro.0
                    2019-03-19 04:00:02.975 - info: host.ioBroker-RasPi stopInstance system.adapter.dwd.0
                    2019-03-19 04:00:02.978 - info: host.ioBroker-RasPi stopInstance canceled schedule system.adapter.dwd.0
                    2019-03-19 04:00:02.979 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-fancyswitch.0
                    2019-03-19 04:00:02.979 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-plumb.0
                    2019-03-19 04:00:02.980 - info: host.ioBroker-RasPi stopInstance system.adapter.samsung.0
                    2019-03-19 04:00:02.981 - warn: host.ioBroker-RasPi stopInstance system.adapter.samsung.0 not running
                    2019-03-19 04:00:02.981 - info: host.ioBroker-RasPi stopInstance system.adapter.daswetter.0
                    2019-03-19 04:00:02.988 - warn: host.ioBroker-RasPi stopInstance system.adapter.daswetter.0 not scheduled
                    2019-03-19 04:00:02.988 - info: host.ioBroker-RasPi stopInstance system.adapter.yr.0
                    2019-03-19 04:00:02.989 - info: host.ioBroker-RasPi stopInstance canceled schedule system.adapter.yr.0
                    2019-03-19 04:00:02.989 - info: host.ioBroker-RasPi stopInstance system.adapter.feiertage.0
                    2019-03-19 04:00:02.990 - info: host.ioBroker-RasPi stopInstance canceled schedule system.adapter.feiertage.0
                    2019-03-19 04:00:02.990 - info: host.ioBroker-RasPi stopInstance system.adapter.ical.0
                    2019-03-19 04:00:02.990 - warn: host.ioBroker-RasPi stopInstance system.adapter.ical.0 not scheduled
                    2019-03-19 04:00:02.991 - info: host.ioBroker-RasPi stopInstance system.adapter.shelly.0
                    2019-03-19 04:00:02.991 - info: host.ioBroker-RasPi stopInstance system.adapter.shelly.0 killing pid 1285
                    2019-03-19 04:00:02.991 - info: host.ioBroker-RasPi stopInstance system.adapter.backitup.0
                    2019-03-19 04:00:02.992 - info: host.ioBroker-RasPi stopInstance system.adapter.backitup.0 killing pid 1301
                    2019-03-19 04:00:02.996 - info: host.ioBroker-RasPi stopInstance system.adapter.zigbee.0
                    2019-03-19 04:00:02.997 - info: host.ioBroker-RasPi stopInstance system.adapter.zigbee.0 killing pid 1315
                    2019-03-19 04:00:03.057 - info: host.ioBroker-RasPi instance system.adapter.fhem.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.123 - info: host.ioBroker-RasPi instance system.adapter.rpi2.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.144 - info: socketio.0 terminating http server on port 8084
                    2019-03-19 04:00:03.168 - info: host.ioBroker-RasPi instance system.adapter.shelly.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.201 - info: host.ioBroker-RasPi instance system.adapter.javascript.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.225 - info: socketio.0 terminating http server on port 8084
                    2019-03-19 04:00:03.254 - info: host.ioBroker-RasPi instance system.adapter.admin.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.282 - info: host.ioBroker-RasPi instance system.adapter.discovery.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.305 - info: host.ioBroker-RasPi instance system.adapter.mihome.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.330 - info: host.ioBroker-RasPi instance system.adapter.terminal.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.354 - info: host.ioBroker-RasPi instance system.adapter.zigbee.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.377 - info: host.ioBroker-RasPi instance system.adapter.web.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.401 - info: host.ioBroker-RasPi instance system.adapter.socketio.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.424 - info: host.ioBroker-RasPi instance system.adapter.cul.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.448 - info: host.ioBroker-RasPi instance system.adapter.javascript.1 terminated with code 0 (OK)
                    2019-03-19 04:00:03.474 - info: host.ioBroker-RasPi instance system.adapter.mihome-vacuum.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.505 - info: host.ioBroker-RasPi instance system.adapter.tr-064.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.533 - info: host.ioBroker-RasPi instance system.adapter.scenes.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.558 - info: host.ioBroker-RasPi instance system.adapter.backitup.0 terminated with code 0 (OK)
                    2019-03-19 04:00:03.877 - info: host.ioBroker-RasPi instance system.adapter.history.0 terminated with code 0 (OK)
                    2019-03-19 04:00:05.307 - info: host.ioBroker-RasPi instance system.adapter.dwd.0 terminated with code 0 (OK)
                    2019-03-19 04:00:08.926 - info: host.ioBroker-RasPi received SIGTERM
                    2019-03-19 04:00:08.927 - info: host.ioBroker-RasPi stopInstance system.adapter.admin.0
                    2019-03-19 04:00:08.927 - warn: host.ioBroker-RasPi stopInstance system.adapter.admin.0 not running
                    2019-03-19 04:00:08.928 - info: host.ioBroker-RasPi stopInstance system.adapter.discovery.0
                    2019-03-19 04:00:08.928 - warn: host.ioBroker-RasPi stopInstance system.adapter.discovery.0 not running
                    2019-03-19 04:00:08.928 - info: host.ioBroker-RasPi stopInstance system.adapter.web.0
                    2019-03-19 04:00:08.929 - warn: host.ioBroker-RasPi stopInstance system.adapter.web.0 not running
                    2019-03-19 04:00:08.929 - info: host.ioBroker-RasPi stopInstance system.adapter.rpi2.0
                    2019-03-19 04:00:08.929 - warn: host.ioBroker-RasPi stopInstance system.adapter.rpi2.0 not running
                    2019-03-19 04:00:08.930 - info: host.ioBroker-RasPi stopInstance system.adapter.socketio.0
                    2019-03-19 04:00:08.930 - warn: host.ioBroker-RasPi stopInstance system.adapter.socketio.0 not running
                    2019-03-19 04:00:08.930 - info: host.ioBroker-RasPi stopInstance system.adapter.vis.0
                    2019-03-19 04:00:08.930 - info: host.ioBroker-RasPi stopInstance system.adapter.history.0
                    2019-03-19 04:00:08.931 - warn: host.ioBroker-RasPi stopInstance system.adapter.history.0 not running
                    2019-03-19 04:00:08.931 - info: host.ioBroker-RasPi stopInstance system.adapter.javascript.0
                    2019-03-19 04:00:08.932 - warn: host.ioBroker-RasPi stopInstance system.adapter.javascript.0 not running
                    2019-03-19 04:00:08.932 - info: host.ioBroker-RasPi stopInstance system.adapter.cul.0
                    2019-03-19 04:00:08.932 - warn: host.ioBroker-RasPi stopInstance system.adapter.cul.0 not running
                    2019-03-19 04:00:08.933 - info: host.ioBroker-RasPi stopInstance system.adapter.fhem.0
                    2019-03-19 04:00:08.933 - warn: host.ioBroker-RasPi stopInstance system.adapter.fhem.0 not running
                    2019-03-19 04:00:08.933 - info: host.ioBroker-RasPi stopInstance system.adapter.javascript.1
                    2019-03-19 04:00:08.934 - warn: host.ioBroker-RasPi stopInstance system.adapter.javascript.1 not running
                    2019-03-19 04:00:08.934 - info: host.ioBroker-RasPi stopInstance system.adapter.mihome-vacuum.0
                    2019-03-19 04:00:08.934 - warn: host.ioBroker-RasPi stopInstance system.adapter.mihome-vacuum.0 not running
                    2019-03-19 04:00:08.934 - info: host.ioBroker-RasPi stopInstance system.adapter.mihome.0
                    2019-03-19 04:00:08.935 - warn: host.ioBroker-RasPi stopInstance system.adapter.mihome.0 not running
                    2019-03-19 04:00:08.935 - info: host.ioBroker-RasPi stopInstance system.adapter.scenes.0
                    2019-03-19 04:00:08.935 - warn: host.ioBroker-RasPi stopInstance system.adapter.scenes.0 not running
                    2019-03-19 04:00:08.936 - info: host.ioBroker-RasPi stopInstance system.adapter.terminal.0
                    2019-03-19 04:00:08.936 - warn: host.ioBroker-RasPi stopInstance system.adapter.terminal.0 not running
                    2019-03-19 04:00:08.936 - info: host.ioBroker-RasPi stopInstance system.adapter.harmony.0
                    2019-03-19 04:00:08.937 - warn: host.ioBroker-RasPi stopInstance system.adapter.harmony.0 not running
                    2019-03-19 04:00:08.937 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-hqwidgets.0
                    2019-03-19 04:00:08.937 - info: host.ioBroker-RasPi stopInstance system.adapter.alexa2.0
                    2019-03-19 04:00:08.938 - warn: host.ioBroker-RasPi stopInstance system.adapter.alexa2.0 not running
                    2019-03-19 04:00:08.938 - info: host.ioBroker-RasPi stopInstance system.adapter.tr-064.0
                    2019-03-19 04:00:08.938 - warn: host.ioBroker-RasPi stopInstance system.adapter.tr-064.0 not running
                    2019-03-19 04:00:08.939 - info: host.ioBroker-RasPi stopInstance system.adapter.cloud.0
                    2019-03-19 04:00:08.939 - warn: host.ioBroker-RasPi stopInstance system.adapter.cloud.0 not running
                    2019-03-19 04:00:08.939 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-timeandweather.0
                    2019-03-19 04:00:08.939 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-weather.0
                    2019-03-19 04:00:08.940 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-metro.0
                    2019-03-19 04:00:08.940 - info: host.ioBroker-RasPi stopInstance system.adapter.dwd.0
                    2019-03-19 04:00:08.940 - warn: host.ioBroker-RasPi stopInstance system.adapter.dwd.0 not scheduled
                    2019-03-19 04:00:08.941 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-fancyswitch.0
                    2019-03-19 04:00:08.941 - info: host.ioBroker-RasPi stopInstance system.adapter.vis-plumb.0
                    2019-03-19 04:00:08.941 - info: host.ioBroker-RasPi stopInstance system.adapter.samsung.0
                    2019-03-19 04:00:08.942 - warn: host.ioBroker-RasPi stopInstance system.adapter.samsung.0 not running
                    2019-03-19 04:00:08.942 - info: host.ioBroker-RasPi stopInstance system.adapter.daswetter.0
                    2019-03-19 04:00:08.942 - warn: host.ioBroker-RasPi stopInstance system.adapter.daswetter.0 not scheduled
                    2019-03-19 04:00:08.943 - info: host.ioBroker-RasPi stopInstance system.adapter.yr.0
                    2019-03-19 04:00:08.943 - warn: host.ioBroker-RasPi stopInstance system.adapter.yr.0 not scheduled
                    2019-03-19 04:00:08.943 - info: host.ioBroker-RasPi stopInstance system.adapter.feiertage.0
                    2019-03-19 04:00:08.944 - warn: host.ioBroker-RasPi stopInstance system.adapter.feiertage.0 not scheduled
                    2019-03-19 04:00:08.944 - info: host.ioBroker-RasPi stopInstance system.adapter.ical.0
                    2019-03-19 04:00:08.944 - warn: host.ioBroker-RasPi stopInstance system.adapter.ical.0 not scheduled
                    2019-03-19 04:00:08.945 - info: host.ioBroker-RasPi stopInstance system.adapter.shelly.0
                    2019-03-19 04:00:08.945 - warn: host.ioBroker-RasPi stopInstance system.adapter.shelly.0 not running
                    2019-03-19 04:00:08.945 - info: host.ioBroker-RasPi stopInstance system.adapter.backitup.0
                    2019-03-19 04:00:08.945 - warn: host.ioBroker-RasPi stopInstance system.adapter.backitup.0 not running
                    2019-03-19 04:00:08.946 - info: host.ioBroker-RasPi stopInstance system.adapter.zigbee.0
                    2019-03-19 04:00:08.946 - warn: host.ioBroker-RasPi stopInstance system.adapter.zigbee.0 not running
                    2019-03-19 04:00:13.010 - info: host.ioBroker-RasPi force terminating
                    2019-03-19 04:01:41.109 - info: host.ioBroker-RasPi iobroker.js-controller version 1.4.2 js-controller starting
                    2019-03-19 04:01:41.116 - info: host.ioBroker-RasPi Copyright (c) 2014-2018 bluefox, 2014 hobbyquaker
                    2019-03-19 04:01:41.117 - info: host.ioBroker-RasPi hostname: ioBroker-RasPi, node: v8.11.3
                    2019-03-19 04:01:41.121 - info: host.ioBroker-RasPi ip addresses: 192.168.178.144 2003:dc:9bd7:3300:fbc8:59d4:babf:3078 fe80::50e8:da28:a103:30a2
                    2019-03-19 04:01:43.275 - info: host.ioBroker-RasPi inMem-objects listening on port 9001
                    2019-03-19 04:01:43.300 - info: host.ioBroker-RasPi InMemoryDB connected
                    2019-03-19 04:01:43.426 - info: host.ioBroker-RasPi 36 instances found
                    2019-03-19 04:01:43.489 - info: host.ioBroker-RasPi starting 28 instances
                    2019-03-19 04:01:43.587 - info: host.ioBroker-RasPi instance system.adapter.admin.0 started with pid 638
                    2019-03-19 04:01:43.604 - info: host.ioBroker-RasPi States connected to redis: 127.0.0.1:6379
                    2019-03-19 04:01:46.449 - info: admin.0 States connected to redis: 127.0.0.1:6379
                    2019-03-19 04:01:46.645 - error: admin.0 setObject id missing!!
                    2019-03-19 04:01:46.654 - info: admin.0 starting. Version 3.6.0 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.3
                    2019-03-19 04:01:46.676 - info: admin.0 requesting all states
                    2019-03-19 04:01:46.679 - info: admin.0 requesting all objects
                    2019-03-19 04:01:46.681 - info: admin.0 Request actual repository...
                    2019-03-19 04:01:49.370 - info: host.ioBroker-RasPi instance system.adapter.discovery.0 started with pid 648
                    2019-03-19 04:01:51.928 - info: host.ioBroker-RasPi instance system.adapter.web.0 started with pid 654
                    2019-03-19 04:01:53.084 - info: discovery.0 States connected to redis: 127.0.0.1:6379
                    2019-03-19 04:01:53.327 - info: discovery.0 starting. Version 1.2.4 in /opt/iobroker/node_modules/iobroker.discovery, node: v8.11.3
                    2019-03-19 04:01:54.116 - info: admin.0 received all states
                    2019-03-19 04:01:54.101 - info: web.0 States connected to redis: 127.0.0.1:6379
                    2019-03-19 04:01:54.267 - error: web.0 setObject id missing!!
                    2019-03-19 04:01:54.277 - info: web.0 starting. Version 2.4.1 in /opt/iobroker/node_modules/iobroker.web, node: v8.11.3
                    2019-03-19 04:01:55.075 - info: web.0 socket.io server listening on port 8082
                    2019-03-19 04:01:55.083 - info: web.0 http server listening on port 8082
                    2019-03-19 04:01:55.523 - info: host.ioBroker-RasPi instance system.adapter.rpi2.0 started with pid 668
                    2019-03-19 04:01:56.557 - info: rpi2.0 States connected to redis: 127.0.0.1:6379
                    2019-03-19 04:01:56.734 - info: rpi2.0 starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.rpi2, node: v8.11.3
                    2019-03-19 04:01:58.115 - info: admin.0 received all objects
                    2019-03-19 04:01:58.885 - info: admin.0 http server listening on port 8081
                    2019-03-19 04:01:58.886 - info: admin.0 Use link "http://localhost:8081" to configure.
                    2019-03-19 04:01:59.446 - info: host.ioBroker-RasPi Update repository "stable" under "http://download.iobroker.net/sources-dist-latest.json"
                    2019-03-19 04:02:00.220 - info: host.ioBroker-RasPi instance system.adapter.socketio.0 started with pid 678
                    2019-03-19 04:02:08.738 - info: admin.0 Repository received successfully.
                    

                    Es muss doch eine Erklärung dafür geben.
                    Gruß Michael

                    1 Antwort Letzte Antwort
                    0
                    • A Offline
                      A Offline
                      Altersrentner
                      schrieb am zuletzt editiert von
                      #46

                      Hallo,
                      Heute Morgen das selbe Spiel. 04:00 wurde alles gestoppt. Die Adapter sind dann neu gestartet aber fehm.0 nicht. Nach Neustart von f.0 lief wieder alles normal. Es muss doch einen Grund dafür geben und ich kann mir fast nicht vorstellen, das mein System ein Einzelfall ist.
                      Gruß Michael

                      1 Antwort Letzte Antwort
                      0
                      • LausiDL Offline
                        LausiDL Offline
                        LausiD
                        schrieb am zuletzt editiert von LausiD
                        #47

                        Hallo Michael,
                        du hast 36 Instanzen am Start, davon werden 28 beim Neustart gestartet.
                        Ob das nicht alles etwas viel für den Pi ist?
                        Um 04:00 Uhr löst der Start von Instanz dwd.0 das ganze aus......
                        Zeige doch mal hier von der Konsole den Befehl "top" wenn alles läuft.
                        Hast du FHEM Adapter auf Version 1.1.1 ?
                        Würde mal dwd.0 und alle nicht unbedingt benötigten Instanzen beenden und nochmal eine Nacht abwarten...
                        Gruß
                        LausiD

                        Doku zum FHEM Adapter
                        Aktuelles zum FHEM Adapter
                        Test FHEM Adapter

                        R A 2 Antworten Letzte Antwort
                        0
                        • LausiDL LausiD

                          Hallo Michael,
                          du hast 36 Instanzen am Start, davon werden 28 beim Neustart gestartet.
                          Ob das nicht alles etwas viel für den Pi ist?
                          Um 04:00 Uhr löst der Start von Instanz dwd.0 das ganze aus......
                          Zeige doch mal hier von der Konsole den Befehl "top" wenn alles läuft.
                          Hast du FHEM Adapter auf Version 1.1.1 ?
                          Würde mal dwd.0 und alle nicht unbedingt benötigten Instanzen beenden und nochmal eine Nacht abwarten...
                          Gruß
                          LausiD

                          R Offline
                          R Offline
                          ramses
                          schrieb am zuletzt editiert von ramses
                          #48

                          @LausiD
                          Natürlich ist das zu viel. :-D
                          Da brauch man nicht groß nachdenken, da reicht ein simpler Taschenrechner.
                          Kein einziger Adapter dürfte dann mehr als im Schnitt 27MB RAM verbrauchen. Und da ist der Eigenbedarf des Betriebssystem nicht mal drin ! Und selbst wenn der ordentlich anfangen würde zu swappen (was bei einem PI KEINE gute Idee ist), könnten die Probleme alle daher kommen.

                          Bei 36 Adaptern, würde ich tatsächlich mal ein geeigneteres Gerät ausprobieren und wenn es zum testen nur eine virtuelle Linux Maschine mit 4GB Ram ist.

                          Wegen ähnlicher Probleme habe ich in den Multihost Modus gewechselt. Auf dem PI läuft jetzt nur noch das, was unbedingt dort laufen muss (Zigbee und BLE) den Rest habe auf eine virtuelle Maschine in den Keller verbannt.
                          Seitdem kein Problem mehr.

                          Bevor ich jetzt noch stundenlang auf Fehlersuche gehe, würde ich einfach die 2 Stunden in Kauf nehmen und alles mal eben flott auf einer geeigneten Maschine neu aufsetzen :-/

                          A 1 Antwort Letzte Antwort
                          0
                          • LausiDL LausiD

                            Hallo Michael,
                            du hast 36 Instanzen am Start, davon werden 28 beim Neustart gestartet.
                            Ob das nicht alles etwas viel für den Pi ist?
                            Um 04:00 Uhr löst der Start von Instanz dwd.0 das ganze aus......
                            Zeige doch mal hier von der Konsole den Befehl "top" wenn alles läuft.
                            Hast du FHEM Adapter auf Version 1.1.1 ?
                            Würde mal dwd.0 und alle nicht unbedingt benötigten Instanzen beenden und nochmal eine Nacht abwarten...
                            Gruß
                            LausiD

                            A Offline
                            A Offline
                            Altersrentner
                            schrieb am zuletzt editiert von
                            #49

                            @LausiD said in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

                            Zeige doch mal hier von der Konsole den Befehl "top" wenn alles läuft.
                            Hast du FHEM Adapter auf Version 1.1.1 ?
                            Würde mal dwd.0 und alle nicht unbedingt benötigten Instanzen beenden und nochmal eine Nacht abwarten...

                            Hallo,
                            Danke für Deine Bemühungen. Wie zu sehen habe ich fhem.0 in Version 0.5.6. Mit höheren Versionen gab es immer wieder Probleme.
                            Hier der gewünschte Ausschnitt.
                            top.PNG
                            Gruß Michael

                            1 Antwort Letzte Antwort
                            0
                            • R ramses

                              @LausiD
                              Natürlich ist das zu viel. :-D
                              Da brauch man nicht groß nachdenken, da reicht ein simpler Taschenrechner.
                              Kein einziger Adapter dürfte dann mehr als im Schnitt 27MB RAM verbrauchen. Und da ist der Eigenbedarf des Betriebssystem nicht mal drin ! Und selbst wenn der ordentlich anfangen würde zu swappen (was bei einem PI KEINE gute Idee ist), könnten die Probleme alle daher kommen.

                              Bei 36 Adaptern, würde ich tatsächlich mal ein geeigneteres Gerät ausprobieren und wenn es zum testen nur eine virtuelle Linux Maschine mit 4GB Ram ist.

                              Wegen ähnlicher Probleme habe ich in den Multihost Modus gewechselt. Auf dem PI läuft jetzt nur noch das, was unbedingt dort laufen muss (Zigbee und BLE) den Rest habe auf eine virtuelle Maschine in den Keller verbannt.
                              Seitdem kein Problem mehr.

                              Bevor ich jetzt noch stundenlang auf Fehlersuche gehe, würde ich einfach die 2 Stunden in Kauf nehmen und alles mal eben flott auf einer geeigneten Maschine neu aufsetzen :-/

                              A Offline
                              A Offline
                              Altersrentner
                              schrieb am zuletzt editiert von
                              #50

                              @ramses said in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

                              Bevor ich jetzt noch stundenlang auf Fehlersuche gehe, würde ich einfach die 2 Stunden in Kauf nehmen und alles mal eben flott auf einer geeigneten Maschine neu aufsetzen

                              Ich habe einen WIN 10 PC 24 Stunden am Netz. Darauf läuft die FHZ Haussteuerung.und da ist genug Platz. Könnte ich mein jetziges System unter Windows einbinden?
                              Gruß Michael

                              R 1 Antwort Letzte Antwort
                              0
                              • A Altersrentner

                                @ramses said in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

                                Bevor ich jetzt noch stundenlang auf Fehlersuche gehe, würde ich einfach die 2 Stunden in Kauf nehmen und alles mal eben flott auf einer geeigneten Maschine neu aufsetzen

                                Ich habe einen WIN 10 PC 24 Stunden am Netz. Darauf läuft die FHZ Haussteuerung.und da ist genug Platz. Könnte ich mein jetziges System unter Windows einbinden?
                                Gruß Michael

                                R Offline
                                R Offline
                                ramses
                                schrieb am zuletzt editiert von ramses
                                #51

                                @Altersrentner
                                Ob eine Migrations von Linux auf ein Windows System einfach so machbar ist, da fehlen mir leider die Erfahrungswerte und da habe ich auch noch nicht viel drüber gelesen.
                                Theoretisch, da es Node und Javascript basierend ist, sollte da nichts gegen sprechen. In der Praxis könnte es natürlich anders aussehen.
                                Das erste was zu tun ist, ist natürlich ein Backup auf dem Raspberry zu erstellen auf den üblichen wegen. Dieses kannst du dann natürlich versuchen unter Windows einzuspielen.

                                Ansonsten (ich weiss leider nicht wieviel RAM dein Windows 10 PC hat), könntest du dir ja unter Windows 10 auch eine isolierte Umgebung in einer virtuellen Maschine machen (z.B. mit Virtualbox) und dort ein Linux installieren.
                                Ist manchmal sogar die bessere Wahl, da einige Adapter schlichtweg nicht unter Windows gescheit laufen (zb Amazon-Dash).

                                A 1 Antwort Letzte Antwort
                                0
                                • R ramses

                                  @Altersrentner
                                  Ob eine Migrations von Linux auf ein Windows System einfach so machbar ist, da fehlen mir leider die Erfahrungswerte und da habe ich auch noch nicht viel drüber gelesen.
                                  Theoretisch, da es Node und Javascript basierend ist, sollte da nichts gegen sprechen. In der Praxis könnte es natürlich anders aussehen.
                                  Das erste was zu tun ist, ist natürlich ein Backup auf dem Raspberry zu erstellen auf den üblichen wegen. Dieses kannst du dann natürlich versuchen unter Windows einzuspielen.

                                  Ansonsten (ich weiss leider nicht wieviel RAM dein Windows 10 PC hat), könntest du dir ja unter Windows 10 auch eine isolierte Umgebung in einer virtuellen Maschine machen (z.B. mit Virtualbox) und dort ein Linux installieren.
                                  Ist manchmal sogar die bessere Wahl, da einige Adapter schlichtweg nicht unter Windows gescheit laufen (zb Amazon-Dash).

                                  A Offline
                                  A Offline
                                  Altersrentner
                                  schrieb am zuletzt editiert von
                                  #52

                                  @ramses Danke für Deine Nachricht.
                                  Habe jetzt unter Win10 Ubuntu installiert und anschließend ioBroker.
                                  Bei der Erstinstallation startete er auch. Als ich versuchte das Backup zu überspielen ging nichts mehr.
                                  Habe dann eine Deinstallation und Neuinstallation ausgeführt. Verlief ohne Fehlermeldung.
                                  Im Browser startet ioBroker aber nicht.

                                  ==========================================================================
                                  
                                      Welcome to the ioBroker installer!
                                      Installer version: 2019-03-15
                                  
                                      You might need to enter your password a couple of times.
                                  
                                  ==========================================================================
                                  
                                  
                                  ==========================================================================
                                      Installing prerequisites (1/4)
                                  ==========================================================================
                                  
                                  
                                  ==========================================================================
                                      Creating ioBroker user and directory (2/4)
                                  ==========================================================================
                                  
                                  Created /etc/sudoers.d/iobroker
                                  Directory /opt/iobroker created
                                  
                                  ==========================================================================
                                      Installing ioBroker (3/4)
                                  ==========================================================================
                                  
                                  
                                  ==========================================================================
                                      Finalizing installation (4/4)
                                  ==========================================================================
                                  
                                  Enabling autostart...
                                  Usage: iobroker \{start\|stop\|restart\}
                                  Autostart enabled!
                                  Fixing directory permissions...
                                  This system does not support setting default permissions.
                                  Do not use npm to manually install adapters unless you know what you are doing!
                                  
                                  ==========================================================================
                                  
                                      ioBroker was installed successfully
                                      Open http://192.168.178.22
                                  192.168.56.1
                                  192.168.99.1
                                  192.168.178.47
                                  169.254.3.134
                                  192.168.137.1:8081 in a browser and start configuring!
                                  
                                  ==========================================================================
                                  
                                  
                                  You need to re-login before doing anything else on the console!
                                  
                                  pi@Toshiba:~$ sudo chmod 777 /opt/iobroker
                                  pi@Toshiba:~$ iobroker stop
                                  iobroker controller daemon is not running
                                  pi@Toshiba:~$ iobroker start
                                  Starting iobroker controller daemon...
                                  iobroker controller daemon started. PID: 22635
                                  pi@Toshiba:~$ iobroker status
                                  iobroker is running
                                  pi@Toshiba:~$ admin status
                                  
                                  Command 'admin' not found, did you mean:
                                  
                                    command 'kadmin' from deb heimdal-clients
                                    command 'kadmin' from deb krb5-user
                                    command 'radmin' from deb freeradius
                                    command 'amin' from deb orville-write
                                  
                                  Try: sudo apt install <deb name>
                                  
                                  pi@Toshiba:~$ status admin
                                  
                                  Command 'status' not found, did you mean:
                                  
                                    command 'states' from deb enscript
                                    command 'qstatus' from deb gridengine-client
                                  
                                  Try: sudo apt install <deb name>
                                  
                                  pi@Toshiba:~$ iobroker restart
                                  Stopping iobroker controller daemon...
                                  iobroker controller daemon stopped.
                                  Starting iobroker controller daemon...
                                  iobroker controller daemon started. PID: 22677
                                  pi@Toshiba:~$ iobroker status
                                  iobroker is running
                                  pi@Toshiba:~$
                                  

                                  Kann mir bitte jemand sagen wie ich den Broker starten kann?
                                  Danke Gruß Michael

                                  HomoranH AlCalzoneA 2 Antworten Letzte Antwort
                                  0
                                  • A Altersrentner

                                    @ramses Danke für Deine Nachricht.
                                    Habe jetzt unter Win10 Ubuntu installiert und anschließend ioBroker.
                                    Bei der Erstinstallation startete er auch. Als ich versuchte das Backup zu überspielen ging nichts mehr.
                                    Habe dann eine Deinstallation und Neuinstallation ausgeführt. Verlief ohne Fehlermeldung.
                                    Im Browser startet ioBroker aber nicht.

                                    ==========================================================================
                                    
                                        Welcome to the ioBroker installer!
                                        Installer version: 2019-03-15
                                    
                                        You might need to enter your password a couple of times.
                                    
                                    ==========================================================================
                                    
                                    
                                    ==========================================================================
                                        Installing prerequisites (1/4)
                                    ==========================================================================
                                    
                                    
                                    ==========================================================================
                                        Creating ioBroker user and directory (2/4)
                                    ==========================================================================
                                    
                                    Created /etc/sudoers.d/iobroker
                                    Directory /opt/iobroker created
                                    
                                    ==========================================================================
                                        Installing ioBroker (3/4)
                                    ==========================================================================
                                    
                                    
                                    ==========================================================================
                                        Finalizing installation (4/4)
                                    ==========================================================================
                                    
                                    Enabling autostart...
                                    Usage: iobroker \{start\|stop\|restart\}
                                    Autostart enabled!
                                    Fixing directory permissions...
                                    This system does not support setting default permissions.
                                    Do not use npm to manually install adapters unless you know what you are doing!
                                    
                                    ==========================================================================
                                    
                                        ioBroker was installed successfully
                                        Open http://192.168.178.22
                                    192.168.56.1
                                    192.168.99.1
                                    192.168.178.47
                                    169.254.3.134
                                    192.168.137.1:8081 in a browser and start configuring!
                                    
                                    ==========================================================================
                                    
                                    
                                    You need to re-login before doing anything else on the console!
                                    
                                    pi@Toshiba:~$ sudo chmod 777 /opt/iobroker
                                    pi@Toshiba:~$ iobroker stop
                                    iobroker controller daemon is not running
                                    pi@Toshiba:~$ iobroker start
                                    Starting iobroker controller daemon...
                                    iobroker controller daemon started. PID: 22635
                                    pi@Toshiba:~$ iobroker status
                                    iobroker is running
                                    pi@Toshiba:~$ admin status
                                    
                                    Command 'admin' not found, did you mean:
                                    
                                      command 'kadmin' from deb heimdal-clients
                                      command 'kadmin' from deb krb5-user
                                      command 'radmin' from deb freeradius
                                      command 'amin' from deb orville-write
                                    
                                    Try: sudo apt install <deb name>
                                    
                                    pi@Toshiba:~$ status admin
                                    
                                    Command 'status' not found, did you mean:
                                    
                                      command 'states' from deb enscript
                                      command 'qstatus' from deb gridengine-client
                                    
                                    Try: sudo apt install <deb name>
                                    
                                    pi@Toshiba:~$ iobroker restart
                                    Stopping iobroker controller daemon...
                                    iobroker controller daemon stopped.
                                    Starting iobroker controller daemon...
                                    iobroker controller daemon started. PID: 22677
                                    pi@Toshiba:~$ iobroker status
                                    iobroker is running
                                    pi@Toshiba:~$
                                    

                                    Kann mir bitte jemand sagen wie ich den Broker starten kann?
                                    Danke Gruß Michael

                                    HomoranH Nicht stören
                                    HomoranH Nicht stören
                                    Homoran
                                    Global Moderator Administrators
                                    schrieb am zuletzt editiert von
                                    #53

                                    @Altersrentner sagte in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:
                                    Es sieht nicht aus, als ob du getan hast was da steht:

                                    You need to re-login before doing anything else on the console!

                                    kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                                    Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                                    der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                                    A 1 Antwort Letzte Antwort
                                    0
                                    • HomoranH Homoran

                                      @Altersrentner sagte in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:
                                      Es sieht nicht aus, als ob du getan hast was da steht:

                                      You need to re-login before doing anything else on the console!

                                      A Offline
                                      A Offline
                                      Altersrentner
                                      schrieb am zuletzt editiert von
                                      #54

                                      @Homoran hallo, verstehe Deine Aussage nicht

                                      1 Antwort Letzte Antwort
                                      0
                                      • A Altersrentner

                                        @ramses Danke für Deine Nachricht.
                                        Habe jetzt unter Win10 Ubuntu installiert und anschließend ioBroker.
                                        Bei der Erstinstallation startete er auch. Als ich versuchte das Backup zu überspielen ging nichts mehr.
                                        Habe dann eine Deinstallation und Neuinstallation ausgeführt. Verlief ohne Fehlermeldung.
                                        Im Browser startet ioBroker aber nicht.

                                        ==========================================================================
                                        
                                            Welcome to the ioBroker installer!
                                            Installer version: 2019-03-15
                                        
                                            You might need to enter your password a couple of times.
                                        
                                        ==========================================================================
                                        
                                        
                                        ==========================================================================
                                            Installing prerequisites (1/4)
                                        ==========================================================================
                                        
                                        
                                        ==========================================================================
                                            Creating ioBroker user and directory (2/4)
                                        ==========================================================================
                                        
                                        Created /etc/sudoers.d/iobroker
                                        Directory /opt/iobroker created
                                        
                                        ==========================================================================
                                            Installing ioBroker (3/4)
                                        ==========================================================================
                                        
                                        
                                        ==========================================================================
                                            Finalizing installation (4/4)
                                        ==========================================================================
                                        
                                        Enabling autostart...
                                        Usage: iobroker \{start\|stop\|restart\}
                                        Autostart enabled!
                                        Fixing directory permissions...
                                        This system does not support setting default permissions.
                                        Do not use npm to manually install adapters unless you know what you are doing!
                                        
                                        ==========================================================================
                                        
                                            ioBroker was installed successfully
                                            Open http://192.168.178.22
                                        192.168.56.1
                                        192.168.99.1
                                        192.168.178.47
                                        169.254.3.134
                                        192.168.137.1:8081 in a browser and start configuring!
                                        
                                        ==========================================================================
                                        
                                        
                                        You need to re-login before doing anything else on the console!
                                        
                                        pi@Toshiba:~$ sudo chmod 777 /opt/iobroker
                                        pi@Toshiba:~$ iobroker stop
                                        iobroker controller daemon is not running
                                        pi@Toshiba:~$ iobroker start
                                        Starting iobroker controller daemon...
                                        iobroker controller daemon started. PID: 22635
                                        pi@Toshiba:~$ iobroker status
                                        iobroker is running
                                        pi@Toshiba:~$ admin status
                                        
                                        Command 'admin' not found, did you mean:
                                        
                                          command 'kadmin' from deb heimdal-clients
                                          command 'kadmin' from deb krb5-user
                                          command 'radmin' from deb freeradius
                                          command 'amin' from deb orville-write
                                        
                                        Try: sudo apt install <deb name>
                                        
                                        pi@Toshiba:~$ status admin
                                        
                                        Command 'status' not found, did you mean:
                                        
                                          command 'states' from deb enscript
                                          command 'qstatus' from deb gridengine-client
                                        
                                        Try: sudo apt install <deb name>
                                        
                                        pi@Toshiba:~$ iobroker restart
                                        Stopping iobroker controller daemon...
                                        iobroker controller daemon stopped.
                                        Starting iobroker controller daemon...
                                        iobroker controller daemon started. PID: 22677
                                        pi@Toshiba:~$ iobroker status
                                        iobroker is running
                                        pi@Toshiba:~$
                                        

                                        Kann mir bitte jemand sagen wie ich den Broker starten kann?
                                        Danke Gruß Michael

                                        AlCalzoneA Offline
                                        AlCalzoneA Offline
                                        AlCalzone
                                        Developer
                                        schrieb am zuletzt editiert von
                                        #55

                                        @Altersrentner sagte in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

                                        Habe jetzt unter Win10 Ubuntu installiert und anschließend ioBroker.

                                        Autostart funktioniert im Linux Subsystem unter Windows nicht - egal was der Installer behauptet. Wenn musst du es schon "richtig" unter Windows installieren.

                                        Warum `sudo` böse ist: https://forum.iobroker.net/post/17109

                                        A 1 Antwort Letzte Antwort
                                        0
                                        • AlCalzoneA AlCalzone

                                          @Altersrentner sagte in Fhem Adapter bricht 04:00 Verbindung ab, ist das ein Problem in meinem System oder im Fhem.0 Adapter:

                                          Habe jetzt unter Win10 Ubuntu installiert und anschließend ioBroker.

                                          Autostart funktioniert im Linux Subsystem unter Windows nicht - egal was der Installer behauptet. Wenn musst du es schon "richtig" unter Windows installieren.

                                          A Offline
                                          A Offline
                                          Altersrentner
                                          schrieb am zuletzt editiert von
                                          #56

                                          @AlCalzone Danke für die Erklärung;
                                          bitte entschuldige jetzt meine unwissende Erklärung. Am Wochenende ist es mir gelungen
                                          ioBroker über Ubuntu auf meinem Win10 PC zu installiern und danach direkt unter Windows.
                                          Beide Installationen laufen mit den selben Instanzen und liefern die gleichen Einträge im Log.
                                          Leider fehlt bei diesen Installationen der Button "LOG HERUNTERLADEN". Damit könnte ich sehen wie die Situation im 24 Stunden Betrieb ist. Kann mir jemand einen Tipp geben.
                                          Desweiteren wird die Adapteransicht anders dargestellt wie in der Pi-Installation. Hier Listeneinträge und bei den beiden anderen Installationen Kacheln.
                                          Die Abstürze bei der Pi Installation um 04:00 sind unverändert. Ich reduziere jetzt die laufenden Instanzen. Mal sehen!!??
                                          Gruß Michael

                                          AlCalzoneA HomoranH 2 Antworten Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          821

                                          Online

                                          32.4k

                                          Benutzer

                                          81.5k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe