NEWS
IoBroker mach nur noch Probleme
-
Ich komme nicht mehr weiter
Es kommen immer neue Fehlermeldungen dazu:
m-rpc.3 2018-10-11 20:37:24.517 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.517 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.517 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.517 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.517 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.517 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.517 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.516 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.515 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.515 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.515 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.514 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.514 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.514 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.514 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.514 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.514 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.514 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.514 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.513 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.513 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.513 error binrpc -> setValue ["1","ON_TIME",30] FLOAT -
host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.429 error instance system.adapter.web.0 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.167 info Restart adapter system.adapter.hm-rpc.0 because enabled host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.167 error instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.043 info Restart adapter system.adapter.hm-rega.0 because enabled host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.042 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:14.197 info Restart adapter system.adapter.javascript.1 because enabled host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:14.196 error instance system.adapter.javascript.1 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:16.648 info Restart adapter system.adapter.javascript.2 because enabled host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:16.646 error instance system.adapter.javascript.2 terminated with code 7 (Adapter already running) -
Hallo,
was soll ich sagen, die Ram Probleme sind weg.
Ich habe aber leider weiterhin Adapter die nicht mehr funktionieren u.a. "s7" bzw. Adapter die immer mal wieder neu starten (grün-rot-grün)
host.raspberrypi 2018-10-11 18:39:59.376 error instance system.adapter.s7.0 terminated with code 0 (OK) host.raspberrypi 2018-10-11 18:39:59.376 error Caught by controller[0]: at Module._compile (module.js:577:32) host.raspberrypi 2018-10-11 18:39:59.376 error Caught by controller[0]: at Object. <anonymous>(/opt/iobroker/node_modules/iobroker.s7/node_modules/node-snap7/lib/node-snap7.js:9:45) host.raspberrypi 2018-10-11 18:39:59.375 error Caught by controller[0]: at bindings (/opt/iobroker/node_modules/iobroker.s7/node_modules/node-snap7/node_modules/bindings/bindings.js:76:44) host.raspberrypi 2018-10-11 18:39:59.375 error Caught by controller[0]: at require (internal/module.js:20:19) host.raspberrypi 2018-10-11 18:39:59.375 error Caught by controller[0]: at Module.require (module.js:504:17) host.raspberrypi 2018-10-11 18:39:59.374 error Caught by controller[0]: at Function.Module._load (module.js:445:3) host.raspberrypi 2018-10-11 18:39:59.374 error Caught by controller[0]: at tryModuleLoad (module.js:453:12) host.raspberrypi 2018-10-11 18:39:59.374 error Caught by controller[0]: at Module.load (module.js:494:32) host.raspberrypi 2018-10-11 18:39:59.373 error Caught by controller[0]: at Object.Module._extensions..node (module.js:604:18) host.raspberrypi 2018-10-11 18:39:59.373 error Caught by controller[0]: at Error (native) host.raspberrypi 2018-10-11 18:39:59.372 error Caught by controller[0]: Error: Module version mismatch. Expected 48, got 46.</anonymous> ```` `Kann es sein das du nodejs Update gemacht hast?
Betroffenen Adapter Neu installieren sollte das fixen.
Oder in das Verzeichnis des Adapters in node_modules und npm rebuild eingeben.
Gesendet vom Handy …
-
Ich komme nicht mehr weiter
Es kommen immer neue Fehlermeldungen dazu:
m-rpc.3 2018-10-11 20:37:24.517 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.517 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.517 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.517 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.517 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.517 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.517 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.516 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.515 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.515 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.515 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.515 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.514 error binrpc -> setValue ["1","ON_TIME",30] FLOAT hm-rpc.3 2018-10-11 20:37:24.514 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.514 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.514 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.514 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.514 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.514 error binrpc -> setValue ["1","STATE",true] BOOL hm-rpc.3 2018-10-11 20:37:24.514 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.513 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.513 error Error: You are sending too fast hm-rpc.3 2018-10-11 20:37:24.513 error binrpc -> setValue ["1","ON_TIME",30] FLOAT ```` `Welches deiner Skripte setzt diese States? Dann checke diese Skripte. Scheinbar läuft da was Amok und sendet viel zu schnell Kommandos an hm-rpc.3. Und genau so ein Skript Problem kann die Ursache für „reconnection to dB“ sein.
Gesendet vom Handy …
-
host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.429 error instance system.adapter.web.0 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.167 info Restart adapter system.adapter.hm-rpc.0 because enabled host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.167 error instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.043 info Restart adapter system.adapter.hm-rega.0 because enabled host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:17.042 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:14.197 info Restart adapter system.adapter.javascript.1 because enabled host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:14.196 error instance system.adapter.javascript.1 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:16.648 info Restart adapter system.adapter.javascript.2 because enabled host.ioBroker-Pi3-slave-sw 2018-10-11 20:38:16.646 error instance system.adapter.javascript.2 terminated with code 7 (Adapter already running) ```` `Siehe letzter Post. Ich tippe darauf das bei dir irgend ein Skript Müll baut und das der verursacher ist.
Gesendet vom Handy …
-
Ok, vielen Dank für die schnelle Hilfe
Ich schaue morgen mal weiter.
Ich habe für heute die Nase voll. Ich drehe mich jetzt schon seit Wochen im Kreis
-
Hallo,
was soll ich sagen, die Ram Probleme sind weg.
Ich habe aber leider weiterhin Adapter die nicht mehr funktionieren u.a. "s7" bzw. Adapter die immer mal wieder neu starten (grün-rot-grün)
host.raspberrypi 2018-10-11 18:39:59.376 error instance system.adapter.s7.0 terminated with code 0 (OK) host.raspberrypi 2018-10-11 18:39:59.376 error Caught by controller[0]: at Module._compile (module.js:577:32) host.raspberrypi 2018-10-11 18:39:59.376 error Caught by controller[0]: at Object. <anonymous>(/opt/iobroker/node_modules/iobroker.s7/node_modules/node-snap7/lib/node-snap7.js:9:45) host.raspberrypi 2018-10-11 18:39:59.375 error Caught by controller[0]: at bindings (/opt/iobroker/node_modules/iobroker.s7/node_modules/node-snap7/node_modules/bindings/bindings.js:76:44) host.raspberrypi 2018-10-11 18:39:59.375 error Caught by controller[0]: at require (internal/module.js:20:19) host.raspberrypi 2018-10-11 18:39:59.375 error Caught by controller[0]: at Module.require (module.js:504:17) host.raspberrypi 2018-10-11 18:39:59.374 error Caught by controller[0]: at Function.Module._load (module.js:445:3) host.raspberrypi 2018-10-11 18:39:59.374 error Caught by controller[0]: at tryModuleLoad (module.js:453:12) host.raspberrypi 2018-10-11 18:39:59.374 error Caught by controller[0]: at Module.load (module.js:494:32) host.raspberrypi 2018-10-11 18:39:59.373 error Caught by controller[0]: at Object.Module._extensions..node (module.js:604:18) host.raspberrypi 2018-10-11 18:39:59.373 error Caught by controller[0]: at Error (native) host.raspberrypi 2018-10-11 18:39:59.372 error Caught by controller[0]: Error: Module version mismatch. Expected 48, got 46.</anonymous> ```` `Kann es sein das du nodejs Update gemacht hast?
Betroffenen Adapter Neu installieren sollte das fixen.
Oder in das Verzeichnis des Adapters in node_modules und npm rebuild eingeben.
Gesendet vom Handy … `
Beim Master oder bei einem der Slaves?
-
Neuer Tag neues Glück
Hallo,
ich habe beim Master und bei einem der zwei Slave das Verzeichnis "iobroker.s7" vorhanden? Habe es bei beiden es ausgeführt
-
Es sind mehrere Adapter
npm rebuild ergab keine Besserung
host.ioBroker-Pi3-slave-sw 2018-10-12 18:40:39.388 info Restart adapter system.adapter.admin.0 because enabled host.ioBroker-Pi3-slave-sw 2018-10-12 18:40:39.387 error instance system.adapter.admin.0 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-12 18:40:38.401 info Restart adapter system.adapter.hm-rega.0 because enabled host.ioBroker-Pi3-slave-sw 2018-10-12 18:40:38.401 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) host.ioBroker-Pi3-slave-sw 2018-10-12 18:40:36.886 info instance system.adapter.hm-rega.0 started with pid 3386 host.ioBroker-Pi3-slave-sw 2018-10-12 18:40:36.439 info instance system.adapter.admin.0 started with pid 3380 host.ioBroker-Pi3-slave-sw 2018-10-12 18:40:35.691 info Restart adapter system.adapter.hm-rpc.0 because enabled -
Ich bin gerade vorsichtig optimistisch.
Habe vor ca. 3 Std einen reboot an allen Hosts durchgeführt, bis jetzt bleibt es ruhig
Hat doch was gebracht, danke dafür
Support us
333
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge