IoBroker mach nur noch Probleme

Elektroman

Platform: linux

Architecture: arm

CPUs: 2

Speed: 0 MHz

Model: Marvell PJ4Bv7 Processor rev 2 (v7l)

RAM: 1009.4 MB

System uptime: 4 T. 08:33:45

Node.js: v6.12.3

NPM: 4.6.1

adapters count: 198

Uptime: 03:57:02

Elektroman

Ich komme nicht mehr weiter

Es kommen immer neue Fehlermeldungen dazu:

m-rpc.3	2018-10-11 20:37:24.517	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.517	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.517	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.517	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.517	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.517	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.517	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.516	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.515	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.515	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.515	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.514	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.514	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.514	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.514	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.514	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.514	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.514	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.514	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.513	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.513	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.513	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT

Elektroman

host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.429	error	instance system.adapter.web.0 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.167	info	Restart adapter system.adapter.hm-rpc.0 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.167	error	instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.043	info	Restart adapter system.adapter.hm-rega.0 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.042	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:14.197	info	Restart adapter system.adapter.javascript.1 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:14.196	error	instance system.adapter.javascript.1 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:16.648	info	Restart adapter system.adapter.javascript.2 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:16.646	error	instance system.adapter.javascript.2 terminated with code 7 (Adapter already running)

apollon77

~~@Elektroman:~~

Hallo,

was soll ich sagen, die Ram Probleme sind weg.

Ich habe aber leider weiterhin Adapter die nicht mehr funktionieren u.a. "s7" bzw. Adapter die immer mal wieder neu starten (grün-rot-grün)

host.raspberrypi	2018-10-11 18:39:59.376	error	instance system.adapter.s7.0 terminated with code 0 (OK)
host.raspberrypi	2018-10-11 18:39:59.376	error	Caught by controller[0]: at Module._compile (module.js:577:32)
host.raspberrypi	2018-10-11 18:39:59.376	error	Caught by controller[0]: at Object. <anonymous>(/opt/iobroker/node_modules/iobroker.s7/node_modules/node-snap7/lib/node-snap7.js:9:45)
host.raspberrypi	2018-10-11 18:39:59.375	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/iobroker.s7/node_modules/node-snap7/node_modules/bindings/bindings.js:76:44)
host.raspberrypi	2018-10-11 18:39:59.375	error	Caught by controller[0]: at require (internal/module.js:20:19)
host.raspberrypi	2018-10-11 18:39:59.375	error	Caught by controller[0]: at Module.require (module.js:504:17)
host.raspberrypi	2018-10-11 18:39:59.374	error	Caught by controller[0]: at Function.Module._load (module.js:445:3)
host.raspberrypi	2018-10-11 18:39:59.374	error	Caught by controller[0]: at tryModuleLoad (module.js:453:12)
host.raspberrypi	2018-10-11 18:39:59.374	error	Caught by controller[0]: at Module.load (module.js:494:32)
host.raspberrypi	2018-10-11 18:39:59.373	error	Caught by controller[0]: at Object.Module._extensions..node (module.js:604:18)
host.raspberrypi	2018-10-11 18:39:59.373	error	Caught by controller[0]: at Error (native)
host.raspberrypi	2018-10-11 18:39:59.372	error	Caught by controller[0]: Error: Module version mismatch. Expected 48, got 46.</anonymous>
```` `

Kann es sein das du nodejs Update gemacht hast?

Betroffenen Adapter Neu installieren sollte das fixen.

Oder in das Verzeichnis des Adapters in node_modules und npm rebuild eingeben.

Gesendet vom Handy …

apollon77

~~@Elektroman:~~

Ich komme nicht mehr weiter

Es kommen immer neue Fehlermeldungen dazu:

m-rpc.3	2018-10-11 20:37:24.517	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.517	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.517	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.517	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.517	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.517	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.517	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.516	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.515	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.515	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.515	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.515	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.514	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
hm-rpc.3	2018-10-11 20:37:24.514	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.514	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.514	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.514	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.514	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.514	error	binrpc -> setValue ["1","STATE",true] BOOL
hm-rpc.3	2018-10-11 20:37:24.514	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.513	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.513	error	Error: You are sending too fast
hm-rpc.3	2018-10-11 20:37:24.513	error	binrpc -> setValue ["1","ON_TIME",30] FLOAT
```` `

Welches deiner Skripte setzt diese States? Dann checke diese Skripte. Scheinbar läuft da was Amok und sendet viel zu schnell Kommandos an hm-rpc.3. Und genau so ein Skript Problem kann die Ursache für „reconnection to dB“ sein.

Gesendet vom Handy …

apollon77

~~@Elektroman:~~

host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.429	error	instance system.adapter.web.0 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.167	info	Restart adapter system.adapter.hm-rpc.0 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.167	error	instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.043	info	Restart adapter system.adapter.hm-rega.0 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:17.042	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:14.197	info	Restart adapter system.adapter.javascript.1 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:14.196	error	instance system.adapter.javascript.1 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:16.648	info	Restart adapter system.adapter.javascript.2 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-11 20:38:16.646	error	instance system.adapter.javascript.2 terminated with code 7 (Adapter already running)
```` `

Siehe letzter Post. Ich tippe darauf das bei dir irgend ein Skript Müll baut und das der verursacher ist.

Gesendet vom Handy …

Elektroman

Ok, vielen Dank für die schnelle Hilfe

Ich schaue morgen mal weiter.

Ich habe für heute die Nase voll. Ich drehe mich jetzt schon seit Wochen im Kreis

Elektroman

~~@apollon77:~~

~~@Elektroman:~~

Hallo,

was soll ich sagen, die Ram Probleme sind weg.

Ich habe aber leider weiterhin Adapter die nicht mehr funktionieren u.a. "s7" bzw. Adapter die immer mal wieder neu starten (grün-rot-grün)

host.raspberrypi	2018-10-11 18:39:59.376	error	instance system.adapter.s7.0 terminated with code 0 (OK)
host.raspberrypi	2018-10-11 18:39:59.376	error	Caught by controller[0]: at Module._compile (module.js:577:32)
host.raspberrypi	2018-10-11 18:39:59.376	error	Caught by controller[0]: at Object. <anonymous>(/opt/iobroker/node_modules/iobroker.s7/node_modules/node-snap7/lib/node-snap7.js:9:45)
host.raspberrypi	2018-10-11 18:39:59.375	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/iobroker.s7/node_modules/node-snap7/node_modules/bindings/bindings.js:76:44)
host.raspberrypi	2018-10-11 18:39:59.375	error	Caught by controller[0]: at require (internal/module.js:20:19)
host.raspberrypi	2018-10-11 18:39:59.375	error	Caught by controller[0]: at Module.require (module.js:504:17)
host.raspberrypi	2018-10-11 18:39:59.374	error	Caught by controller[0]: at Function.Module._load (module.js:445:3)
host.raspberrypi	2018-10-11 18:39:59.374	error	Caught by controller[0]: at tryModuleLoad (module.js:453:12)
host.raspberrypi	2018-10-11 18:39:59.374	error	Caught by controller[0]: at Module.load (module.js:494:32)
host.raspberrypi	2018-10-11 18:39:59.373	error	Caught by controller[0]: at Object.Module._extensions..node (module.js:604:18)
host.raspberrypi	2018-10-11 18:39:59.373	error	Caught by controller[0]: at Error (native)
host.raspberrypi	2018-10-11 18:39:59.372	error	Caught by controller[0]: Error: Module version mismatch. Expected 48, got 46.</anonymous>
```` `

Kann es sein das du nodejs Update gemacht hast?

Betroffenen Adapter Neu installieren sollte das fixen.

Oder in das Verzeichnis des Adapters in node_modules und npm rebuild eingeben.

Gesendet vom Handy … `

Beim Master oder bei einem der Slaves?

apollon77

Na da Wonder s7 Adapter installiert ist der da meckert …

Gesendet vom Handy ...

Elektroman

Neuer Tag neues Glück

Hallo,

ich habe beim Master und bei einem der zwei Slave das Verzeichnis "iobroker.s7" vorhanden? Habe es bei beiden es ausgeführt

Elektroman

Es sind mehrere Adapter :cry:

npm rebuild ergab keine Besserung

host.ioBroker-Pi3-slave-sw	2018-10-12 18:40:39.388	info	Restart adapter system.adapter.admin.0 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-12 18:40:39.387	error	instance system.adapter.admin.0 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-12 18:40:38.401	info	Restart adapter system.adapter.hm-rega.0 because enabled
host.ioBroker-Pi3-slave-sw	2018-10-12 18:40:38.401	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
host.ioBroker-Pi3-slave-sw	2018-10-12 18:40:36.886	info	instance system.adapter.hm-rega.0 started with pid 3386
host.ioBroker-Pi3-slave-sw	2018-10-12 18:40:36.439	info	instance system.adapter.admin.0 started with pid 3380
host.ioBroker-Pi3-slave-sw	2018-10-12 18:40:35.691	info	Restart adapter system.adapter.hm-rpc.0 because enabled

apollon77

npm rebuild von s7 sorgt erstmal nur dafür das s7 wieder tut … alles andere ist was anderes.

Schau Die betroffenen Adapter an die mit error 7 gemeckert werden und kille die prozesse die da laufen oder mach nen reboot

Elektroman

Ich bin gerade vorsichtig optimistisch. ;-)

Habe vor ca. 3 Std einen reboot an allen Hosts durchgeführt, bis jetzt bleibt es ruhig

Hat doch was gebracht, danke dafür

Community Forum

NEWS

IoBroker mach nur noch Probleme

Support us

413

32.4k

81.4k

1.3m