NEWS
Iobroker im Rock64 per Browser nicht zu erreichen.
-
Hallo zusammen,
ich habe jetzt das fertige iobroker Image vom 11.12.2017 mit 609,8 MB installiert.
Danach habe ich ein update und upgrade durchgeführt.
Danach habe ich eine feste IP und ein root Passwort eingerichtet.
Nach einem neu Start des Systems habe ich den iobroker über Putty gestartet.
Putty hat mir den Start auch bestätigt.
Problem: Im Browser ist der Iobroker über den Port 8081 und 8082 nicht erreichbar.
Die neue IP wurde richtig bezogen.
-
ich fürchte das ist das aktuelle Problem bei nodejs.org.
Bitte mach mal
node -v nodejs -v npm -v
Gruß
Rainer
-
Danach habe ich ein update und upgrade durchgeführt. `
Damit hast Du sicherlich kein NPM mehr. Was ergibt ?npm -v
Mein Vorschlag: Das Image noch einmal auf die SD Card bringen und dann
@kaffeeonkel:Danach habe ich eine feste IP und ein root Passwort eingerichtet. `
ohne update und upgrade.Rainer war schneller
-
Ich grüße dich.
node = v6.14.3
nodejs = v6.14.3
npm = v3.10.10
-
Das sieht alles gut aus - Gottseidank
was sagt
cd /opt/iobroker sudo iobroker list instances
Gruß
Rainer
-
Da kommt:
No connection to states 127.0…....:6379[redis]
-
sudo apt-get install redis-server
-
nicht unbedingt;
Wenn dieser Befehl bringt:
...ist bereits die neueste Version
bitte warten, ich muss noch etwas checken.
Gruß
rainer
-
Habe ich installiert
-
jetzt oder schon immer?
-
Soll nach Image Beschreibung im Image enthalten sein.
http://www.iobroker.net/docu/?page_id=7580&lang=de
Auf dieser Seite das 2. Rock64 Image von oben in der Liste. Vom 11.12.2017 mit 609.8 MB habe ich installiert.
Redis ist in der Beschreibung aufgeführt.
-
Das sieht alles gut aus - Gottseidank
was sagt
cd /opt/iobroker sudo iobroker list instances
Gruß
Rainer `
Da passiert bei nichtsGesendet von iPad mit Tapatalk Pro
-
Der admin ist weg und einen neuen kann ich nicht installieren
Gesendet von iPad mit Tapatalk Pro
-
Der admin ist weg und einen neuen kann ich nicht installieren `
Was ergibt ?node -v nodejs -v npm -v
-
Node 6.14.3
Npm 6.2.0
Nodejs 6.14.3
Gesendet von iPad mit Tapatalk Pro
-
Node 6.14.3
Npm 6.2.0
Nodejs 6.14.3 `
Das sieht gut aus. Ist ioBroker gestartet ? Was ergibt ?sudo iobroker stop sudo iobroker start
-
<code>root@ioBroker-Rock64:/opt/iobroker# sudo iobroker stop Stopping iobroker controller daemon... iobroker controller daemon stopped. Exit code for "killall.sh": 0 root@ioBroker-Rock64:/opt/iobroker# sudo iobroker start Starting iobroker controller daemon... iobroker controller daemon started. PID: 2737 root@ioBroker-Rock64:/opt/iobroker# /code] startet aber nicht</code>
-
Was steht am Ende des Logfiles von heute? Irgendwelche Fehler bzgl. admin?
/opt/iobroker/log/iobroker.<datum_von_heute>.log</datum_von_heute>
Bringt
iobroker start admin.0
eine Fehlermeldung? Sehe gerade, Du bist ja root. Also kein sudo notwendig.
-
iobroker controller daemon started. PID: 2737 root@ioBroker-Rock64:/opt/iobroker#
startet aber nicht `
Doch, ioBroker (js-controller) ist gestartet. Schau mal mit top, welche Prozesse laufen.top
Mit shift-m (großes M), während top läuft, sortiert man nach RAM-Verbrauch.
-
<code>PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2737 root 20 0 973916 38364 18220 S 0,0 1,0 0:03.29 iobroker.js-con 947 root 20 0 277124 15316 13256 S 0,0 0,4 0:00.46 NetworkManager 1094 root 20 0 232552 7084 6260 S 0,0 0,2 0:00.09 polkitd 2384 root 20 0 11648 6044 5052 S 0,0 0,2 0:00.13 sshd 1353 root 20 0 11336 5880 4980 S 0,0 0,1 0:00.89 sshd 1050 root 20 0 9764 5380 4696 S 0,0 0,1 0:00.09 sshd 1 root 20 0 154412 5300 3448 S 0,0 0,1 0:06.02 systemd 1440 root 20 0 8584 4788 3052 S 0,0 0,1 0:00.38 bash 378 root 20 0 7600 4264 1184 S 0,0 0,1 0:01.06 haveged 1292 ntp 20 0 14520 4072 3520 S 0,0 0,1 0:00.24 ntpd 2864 root 20 0 9592 3524 2904 R 0,7 0,1 0:01.41 top 1359 root 20 0 5920 3464 2948 S 0,0 0,1 0:00.04 systemd 937 message+ 20 0 6048 3164 2752 S 0,0 0,1 0:00.34 dbus-daemon 932 syslog 20 0 226220 3136 2416 S 0,0 0,1 0:00.13 rsyslogd 379 root 20 0 9036 3088 2780 S 0,0 0,1 0:00.69 systemd-journal 950 root 20 0 7232 2884 2604 S 0,0 0,1 0:00.02 cron 338 root 20 0 11000 2752 2296 S 0,0 0,1 0:00.31 systemd-udevd 954 root 20 0 3888 2500 2196 S 0,0 0,1 0:00.08 systemd-logind 1134 root 20 0 5984 2192 2056 S 0,0 0,1 0:00.00 agetty 1364 root 20 0 156228 2128 4 S 0,0 0,1 0:00.00 (sd-pam) 1298 root 20 0 5176 2048 1208 S 0,0 0,1 0:00.00 dhclient 2463 root 20 0 2272 1548 1400 S 0,0 0,0 0:00.03 sftp-server 1132 root 20 0 6168 1472 1344 S 0,0 0,0 0:00.00 agetty 2 root 20 0 0 0 0 S 0,0 0,0 0:00.01 kthreadd 3 root 20 0 0 0 0 S 0,0 0,0 0:00.22 ksoftirqd/0 4 root 20 0 0 0 0 S 0,0 0,0 0:00.38 kworker/0:0 5 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/0:0H 7 root 20 0 0 0 0 S 0,0 0,0 0:00.72 rcu_sched 8 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcu_bh 9 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0 10 root rt 0 0 0 0 S 0,0 0,0 0:00.01 watchdog/0 11 root rt 0 0 0 0 S 0,0 0,0 0:00.01 watchdog/1 12 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/1 13 root 20 0 0 0 0 S 0,0 0,0 0:00.19 ksoftirqd/1 15 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/1:0H 16 root rt 0 0 0 0 S 0,0 0,0 0:00.01 watchdog/2 17 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/2 18 root 20 0 0 0 0 S 0,0 0,0 0:00.62 ksoftirqd/2 20 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/2:0H 21 root rt 0 0 0 0 S 0,0 0,0 0:00.01 watchdog/3 22 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/3 23 root 20 0 0 0 0 S 0,0 0,0 0:00.23 ksoftirqd/3 25 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/3:0H 26 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kdevtmpfs 27 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 netns 28 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 perf 29 root 20 0 0 0 0 S 0,0 0,0 0:00.00 khungtaskd 30 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 writeback 31 root 25 5 0 0 0 S 0,0 0,0 0:00.00 ksmd /code]</code>