NEWS
Iobroker im Rock64 per Browser nicht zu erreichen.
-
ich fürchte das ist das aktuelle Problem bei nodejs.org.
Bitte mach mal
node -v nodejs -v npm -v
Gruß
Rainer
-
Danach habe ich ein update und upgrade durchgeführt. `
Damit hast Du sicherlich kein NPM mehr. Was ergibt ?npm -v
Mein Vorschlag: Das Image noch einmal auf die SD Card bringen und dann
@kaffeeonkel:Danach habe ich eine feste IP und ein root Passwort eingerichtet. `
ohne update und upgrade.Rainer war schneller
-
Ich grüße dich.
node = v6.14.3
nodejs = v6.14.3
npm = v3.10.10
-
Das sieht alles gut aus - Gottseidank
was sagt
cd /opt/iobroker sudo iobroker list instances
Gruß
Rainer
-
Da kommt:
No connection to states 127.0…....:6379[redis]
-
sudo apt-get install redis-server
-
nicht unbedingt;
Wenn dieser Befehl bringt:
...ist bereits die neueste Version
bitte warten, ich muss noch etwas checken.
Gruß
rainer
-
Habe ich installiert
-
jetzt oder schon immer?
-
Soll nach Image Beschreibung im Image enthalten sein.
http://www.iobroker.net/docu/?page_id=7580&lang=de
Auf dieser Seite das 2. Rock64 Image von oben in der Liste. Vom 11.12.2017 mit 609.8 MB habe ich installiert.
Redis ist in der Beschreibung aufgeführt.
-
Das sieht alles gut aus - Gottseidank
was sagt
cd /opt/iobroker sudo iobroker list instances
Gruß
Rainer `
Da passiert bei nichtsGesendet von iPad mit Tapatalk Pro
-
Der admin ist weg und einen neuen kann ich nicht installieren
Gesendet von iPad mit Tapatalk Pro
-
Der admin ist weg und einen neuen kann ich nicht installieren `
Was ergibt ?node -v nodejs -v npm -v
-
Node 6.14.3
Npm 6.2.0
Nodejs 6.14.3
Gesendet von iPad mit Tapatalk Pro
-
Node 6.14.3
Npm 6.2.0
Nodejs 6.14.3 `
Das sieht gut aus. Ist ioBroker gestartet ? Was ergibt ?sudo iobroker stop sudo iobroker start
-
<code>root@ioBroker-Rock64:/opt/iobroker# sudo iobroker stop Stopping iobroker controller daemon... iobroker controller daemon stopped. Exit code for "killall.sh": 0 root@ioBroker-Rock64:/opt/iobroker# sudo iobroker start Starting iobroker controller daemon... iobroker controller daemon started. PID: 2737 root@ioBroker-Rock64:/opt/iobroker# /code] startet aber nicht</code>
-
Was steht am Ende des Logfiles von heute? Irgendwelche Fehler bzgl. admin?
/opt/iobroker/log/iobroker.<datum_von_heute>.log</datum_von_heute>
Bringt
iobroker start admin.0
eine Fehlermeldung? Sehe gerade, Du bist ja root. Also kein sudo notwendig.
-
iobroker controller daemon started. PID: 2737 root@ioBroker-Rock64:/opt/iobroker#
startet aber nicht `
Doch, ioBroker (js-controller) ist gestartet. Schau mal mit top, welche Prozesse laufen.top
Mit shift-m (großes M), während top läuft, sortiert man nach RAM-Verbrauch.
-
<code>PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2737 root 20 0 973916 38364 18220 S 0,0 1,0 0:03.29 iobroker.js-con 947 root 20 0 277124 15316 13256 S 0,0 0,4 0:00.46 NetworkManager 1094 root 20 0 232552 7084 6260 S 0,0 0,2 0:00.09 polkitd 2384 root 20 0 11648 6044 5052 S 0,0 0,2 0:00.13 sshd 1353 root 20 0 11336 5880 4980 S 0,0 0,1 0:00.89 sshd 1050 root 20 0 9764 5380 4696 S 0,0 0,1 0:00.09 sshd 1 root 20 0 154412 5300 3448 S 0,0 0,1 0:06.02 systemd 1440 root 20 0 8584 4788 3052 S 0,0 0,1 0:00.38 bash 378 root 20 0 7600 4264 1184 S 0,0 0,1 0:01.06 haveged 1292 ntp 20 0 14520 4072 3520 S 0,0 0,1 0:00.24 ntpd 2864 root 20 0 9592 3524 2904 R 0,7 0,1 0:01.41 top 1359 root 20 0 5920 3464 2948 S 0,0 0,1 0:00.04 systemd 937 message+ 20 0 6048 3164 2752 S 0,0 0,1 0:00.34 dbus-daemon 932 syslog 20 0 226220 3136 2416 S 0,0 0,1 0:00.13 rsyslogd 379 root 20 0 9036 3088 2780 S 0,0 0,1 0:00.69 systemd-journal 950 root 20 0 7232 2884 2604 S 0,0 0,1 0:00.02 cron 338 root 20 0 11000 2752 2296 S 0,0 0,1 0:00.31 systemd-udevd 954 root 20 0 3888 2500 2196 S 0,0 0,1 0:00.08 systemd-logind 1134 root 20 0 5984 2192 2056 S 0,0 0,1 0:00.00 agetty 1364 root 20 0 156228 2128 4 S 0,0 0,1 0:00.00 (sd-pam) 1298 root 20 0 5176 2048 1208 S 0,0 0,1 0:00.00 dhclient 2463 root 20 0 2272 1548 1400 S 0,0 0,0 0:00.03 sftp-server 1132 root 20 0 6168 1472 1344 S 0,0 0,0 0:00.00 agetty 2 root 20 0 0 0 0 S 0,0 0,0 0:00.01 kthreadd 3 root 20 0 0 0 0 S 0,0 0,0 0:00.22 ksoftirqd/0 4 root 20 0 0 0 0 S 0,0 0,0 0:00.38 kworker/0:0 5 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/0:0H 7 root 20 0 0 0 0 S 0,0 0,0 0:00.72 rcu_sched 8 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcu_bh 9 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0 10 root rt 0 0 0 0 S 0,0 0,0 0:00.01 watchdog/0 11 root rt 0 0 0 0 S 0,0 0,0 0:00.01 watchdog/1 12 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/1 13 root 20 0 0 0 0 S 0,0 0,0 0:00.19 ksoftirqd/1 15 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/1:0H 16 root rt 0 0 0 0 S 0,0 0,0 0:00.01 watchdog/2 17 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/2 18 root 20 0 0 0 0 S 0,0 0,0 0:00.62 ksoftirqd/2 20 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/2:0H 21 root rt 0 0 0 0 S 0,0 0,0 0:00.01 watchdog/3 22 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/3 23 root 20 0 0 0 0 S 0,0 0,0 0:00.23 ksoftirqd/3 25 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/3:0H 26 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kdevtmpfs 27 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 netns 28 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 perf 29 root 20 0 0 0 0 S 0,0 0,0 0:00.00 khungtaskd 30 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 writeback 31 root 25 5 0 0 0 S 0,0 0,0 0:00.00 ksmd /code]</code>
-
Jupp, ioBroker js-controller läuft. Kann aber keine Adapter sehen. Und was ist mit dem admin-start und dem Log?