Sourceanalytics ohne funktion
-
siehste, da gehts nämlich schon los.... Zitat:
gleichen CPU-Architektur aus möglich.und
Also Debian 12 'Bookworm' und z.B. arch64. CrossUpgrades von 32Bit 'armhf' auf 'arm64' sind nicht möglich (nur für echte Pinguine!) und bedingen eine Neuinstallation.Puhhhh.... Ich versteh nur Bahnhof. Ich hab nen Pi 5, mehr weiss ich nicht.
und
iob nodejs-updateIch bin aber auch kein ITler oder kenn mich besonders gut in dem bereich aus.
Und dann meinst du beurteilen zu können, dass Updates für dich nicht relevant sind? Gerade dann musst du dich auf das Wissen von anderen verlassen und jedes Update einspielen.
Theoretisch hast du da Recht, Praktisch ist halt so:
Wenn ich als Laie Updates mache, danach irgendwie nur die hälfte noch funktioniert, dann schreckt das erst mal ab. Wenn ich dann als Laie mehrer Stunden benötige um ein Backup einzuspielen, was dann auch nicht wieder alles herstellt und funktioniert, dann ist das erst mal sehr frustrieren und nimmt mir den glauben daran, das Updates was gutes sind.
Das klingt vielleicht Traurig, ist aber wahr.Das Problem ist für mich halt auch, wenn ein "Profi" oder halt jemand der sich besser auskennt, etwas Schreibt/erklärt und irgendwelche Fachbegriffe auftauchen, dann ist das für mich als Laie erst mal mit sehr vielen ? verbunden. oft geh ich dann her und versuch mich über Google einzulesen/informieren, und das führt dann meistens dazu dass ich total vom eigentlichen Ziel abweiche und alles meisten schlimmer mache.
Deswegen schrieb ich ja, ich bräucht am besten eine Anleitung, schritt für schritt.Ich hoffe ihr versteht was ich meine.
Wenn ich als Laie Updates mache, danach irgendwie nur die hälfte noch funktioniert, dann schreckt das erst mal ab
Klar, aber deine Schlussfolgerung ist falsch.
Nur mal als alternative Möglichkeiten:
- Beim Update hat es das Dateisystem auf einer Billig-Sd-Karte geschreddert.
- Beim Download einer Datei ist es zu Störungen im Netzwerk gekommen, und die Datei war defekt.
- Das Update ist nicht korrekt durchgeführt worden
- Adapter benötigen bestimmte nodejs Versionen
- Nodejs benötigt bestimmte Betriebssystemversionen.
- Das Betriebssystem muss zur Hardware passen.
Aber lange Rede, kurzer Sinn:
Fang so wie beschrieben neu an, wir werden dich führen!WICHTIG:
Unbedingt lieber zu oft, als zu wenig nachfragen.Schritt 1: NEUE SD-Karte besorgen und aktuelles Raspberry OS Trixie lite installieren
dann Node.js oder
Nodejs kommt automatisch richtig mit der iobroker Installation!
Das sollte auch nicht manuell "zusammengeschustert" werden
-
Wenn ich als Laie Updates mache, danach irgendwie nur die hälfte noch funktioniert, dann schreckt das erst mal ab
Klar, aber deine Schlussfolgerung ist falsch.
Nur mal als alternative Möglichkeiten:
- Beim Update hat es das Dateisystem auf einer Billig-Sd-Karte geschreddert.
- Beim Download einer Datei ist es zu Störungen im Netzwerk gekommen, und die Datei war defekt.
- Das Update ist nicht korrekt durchgeführt worden
- Adapter benötigen bestimmte nodejs Versionen
- Nodejs benötigt bestimmte Betriebssystemversionen.
- Das Betriebssystem muss zur Hardware passen.
Aber lange Rede, kurzer Sinn:
Fang so wie beschrieben neu an, wir werden dich führen!WICHTIG:
Unbedingt lieber zu oft, als zu wenig nachfragen.Schritt 1: NEUE SD-Karte besorgen und aktuelles Raspberry OS Trixie lite installieren
dann Node.js oder
Nodejs kommt automatisch richtig mit der iobroker Installation!
Das sollte auch nicht manuell "zusammengeschustert" werden
> Nur mal als alternative Möglichkeiten: > * Beim Update hat es das Dateisystem auf einer Billig-Sd-Karte geschreddert.Nein, keine SD....SSD, da läuft das system drauf
> * Beim Download einer Datei ist es zu Störungen im Netzwerk gekommen, und die Datei war defekt. > * Das Update ist nicht korrekt durchgeführt worden > * Adapter benötigen bestimmte nodejs Versionen > * Nodejs benötigt bestimmte Betriebssystemversionen. > * Das Betriebssystem muss zur Hardware passen.Das kann ich natürlich nicht mit Sicherheit ausschliessen.
iob diag inside:
```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi5 Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 12:40:05 up 7 min, 1 user, load average: 0.11, 0.35, 0.23 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-05-01 12:40:06 CEST Universal time: Fri 2026-05-01 10:40:06 UTC RTC time: Fri 2026-05-01 10:40:06 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': Bernd HOME=/home/Bernd GROUPS=Bernd adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/Bernd GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 2.8G 4.9G 15M 901M 5.7G Swap: 209M 0B 209M Total: 8.7G 2.8G 5.1G Active iob-Instances: 31 8062 M total memory 2628 M used memory 2450 M active memory 568 M inactive memory 4673 M free memory 87 M buffer memory 772 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 12:40:06 up 7 min, 1 user, load average: 0.18, 0.36, 0.24 Tasks: 225 total, 2 running, 223 sleeping, 0 stopped, 0 zombie %Cpu(s): 6.7 us, 0.0 sy, 0.0 ni, 91.1 id, 2.2 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8062.9 total, 4670.2 free, 2630.3 used, 860.9 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 5432.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 15M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 12G 16G 42% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 4.0G 96K 4.0G 1% /tmp tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service //192.168.178.37/home/backup/iobroker cifs 2.7T 1.8T 955G 66% /opt/iobroker/backups tmpfs tmpfs 807M 32K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri May 1 12:32:23 2026] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Fri May 1 12:32:25 2026] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/opt/iobroker/backups //192.168.178.37/home/backup/iobroker cifs rw,relatime,vers=3.1.1,cache=strict,upcall_target=app,username=backup,uid=1001,forceuid,gid=1001,forcegid,addr=192.168.178.37,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,reparse=nfs,rsize=4194304,wsize=4194304,bsize=1048576,retrans=1,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 3.6G /var/ 2.8G /var/log/journal/9ba9919aad384e6eaaa1e9cb2eaa4832 2.8G /var/log/journal 2.8G /var/log 373M /var/cache Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 185M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 858M /opt/iobroker/iobroker-data/ 504M /opt/iobroker/iobroker-data/files 194M /opt/iobroker/iobroker-data/history 121M /opt/iobroker/iobroker-data/files/vis 114M /opt/iobroker/iobroker-data/files/vis/widgets The five largest files in iobroker-data are: 28M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 18M /opt/iobroker/iobroker-data/states.jsonl 16M /opt/iobroker/iobroker-data/files/vis-2.0/New project/vis-views.json 15M /opt/iobroker/iobroker-data/files/vis-2.0/vis-views.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v20.20.2 /usr/bin/node v20.20.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 ✓ Node.js installation is correct nodejs: Installed: 20.20.2-1nodesource1 Candidate: 20.20.2-1nodesource1 Version table: *** 20.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.6-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.5-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: ██████ █████ ███ ██ ██████ ███████ ███████ ██ ██ ██ ██ ████ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ██ ███ █████ ███████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██████ ██ ██ ██ ████ ██████ ███████ ██ ██ v20.20.2 is end-of-life. There are high chances of being vulnerable. Please upgrade it. *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi5 raspberrypi5 (version: 7.0.7, hostname: raspberrypi5 , alive, uptime: 453) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 1 | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspberrypi5 - disabled + system.adapter.backitup.0 : backitup : raspberrypi5 - enabled + system.adapter.cloud.0 : cloud : raspberrypi5 - enabled system.adapter.daswetter.0 : daswetter : raspberrypi5 - disabled system.adapter.devices.0 : devices : raspberrypi5 - disabled + system.adapter.discovery.0 : discovery : raspberrypi5 - enabled system.adapter.dwd.0 : dwd : raspberrypi5 - disabled + system.adapter.echarts.0 : echarts : raspberrypi5 - enabled system.adapter.feiertage.0 : feiertage : raspberrypi5 - disabled + system.adapter.fronius-solarweb.0 : fronius-solarweb : raspberrypi5 - enabled + system.adapter.fronius.0 : fronius : raspberrypi5 - enabled + system.adapter.fronius.1 : fronius : raspberrypi5 - enabled + system.adapter.history.0 : history : raspberrypi5 - enabled system.adapter.ical.0 : ical : raspberrypi5 - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi5 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi5 - disabled system.adapter.influxdb.0 : influxdb : raspberrypi5 - disabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi5 - enabled + system.adapter.iqontrol.0 : iqontrol : raspberrypi5 - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.javascript.0 : javascript : raspberrypi5 - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.ping.0 : ping : raspberrypi5 - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi5 - enabled + system.adapter.scenes.0 : scenes : raspberrypi5 - enabled + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi5 - enabled system.adapter.sql.0 : sql : raspberrypi5 - disabled, port: 3306 + system.adapter.synology.0 : synology : raspberrypi5 - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi5 - enabled + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi5 - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi5 - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi5 - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi5 - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: raspberrypi5 - disabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: raspberrypi5 - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi5 - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi5 - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi5 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi5 - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi5 - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi5 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi5 - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi5 - disabled system.adapter.vis.0 : vis : raspberrypi5 - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi5 - enabled + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi5 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.jarvis.0 : jarvis : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi5 - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 4.5.3 , installed 4.5.3 Adapter "devices" : 1.2.14 , installed 1.2.14 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "feiertage" : 1.3.0 , installed 1.3.0 Adapter "fronius" : 2.2.0 , installed 2.2.0 Adapter "fronius-solarweb": 0.0.3 , installed 0.0.3 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "ical" : 1.20.0 , installed 1.20.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "rpi2" : 3.0.2 , installed 2.4.0 [Updatable] Adapter "scenes" : 4.0.4 , installed 4.0.4 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.1.3 Adapter "sonoff" : 3.3.0 , installed 3.3.0 Adapter "sql" : 3.0.1 , installed 3.0.1 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 2.0.2, installed 2.0.2 Adapter "vis-2-widgets-inventwo": 0.7.2, installed 0.7.2 Adapter "vis-2-widgets-jaeger-design": 1.4.19, installed 1.4.19 Adapter "vis-2-widgets-material": 1.6.1, installed 1.6.1 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.6.0 , installed 1.6.0 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Objects and States Please stand by - This may take a while Objects: 14053 States: 11479 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://deb.nodesource.com/node_20.x nodistro InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z W: Failed to fetch https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian-security trixie-security InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Err:5 https://deb.nodesource.com/node_20.x nodistro InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://deb.nodesource.com/node_20.x nodistro InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z W: Failed to fetch https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z W: Some index files failed to download. They have been ignored, or old ones used instead. Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 7574 1172/exim4 tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 10227 1730/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7457 885/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 7001 874/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 8368 874/iobroker.js-con tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 9573 1335/node-red tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 8943 1538/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 9954 1603/io.sonoff.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 10658 1586/io.mqtt.0 tcp6 0 0 :::22 :::* LISTEN 0 7459 885/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 7575 1172/exim4 tcp6 0 0 :::8081 :::* LISTEN 1001 10265 906/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 10749 1665/io.web.0 udp 0 0 0.0.0.0:46980 0.0.0.0:* 104 7340 698/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7338 698/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 9920 1571/io.shelly.1 udp6 0 0 fe80::5c42:ca8c:448:546 :::* 0 8529 788/NetworkManager udp6 0 0 fe80::dc25:f03d:c31:546 :::* 0 8410 788/NetworkManager udp6 0 0 :::5353 :::* 104 7339 698/avahi-daemon: r udp6 0 0 :::34331 :::* 104 7341 698/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-05-01 12:34:50.786 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:35:06.037 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:35:21.293 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:35:36.637 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:35:51.914 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:36:07.201 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:36:22.492 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:36:37.847 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:36:53.115 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:37:08.405 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:37:23.664 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:37:38.922 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:37:54.175 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:38:09.454 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:38:24.728 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:38:29.624 - info: shelly.0 (1538) [MQTT] Device with client id "shellytrv-8CF681B6FADA" connected from 192.168.178.94! 2026-05-01 12:38:33.465 - info: shelly.0 (1538) [MQTT] Device with client id "shellytrv-8CF681B6FADA" initialized. 2026-05-01 12:38:39.996 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:38:55.338 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:39:10.633 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:39:25.902 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:39:41.181 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:39:56.484 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:40:11.764 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:40:27.045 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) -
> Nur mal als alternative Möglichkeiten: > * Beim Update hat es das Dateisystem auf einer Billig-Sd-Karte geschreddert.Nein, keine SD....SSD, da läuft das system drauf
> * Beim Download einer Datei ist es zu Störungen im Netzwerk gekommen, und die Datei war defekt. > * Das Update ist nicht korrekt durchgeführt worden > * Adapter benötigen bestimmte nodejs Versionen > * Nodejs benötigt bestimmte Betriebssystemversionen. > * Das Betriebssystem muss zur Hardware passen.Das kann ich natürlich nicht mit Sicherheit ausschliessen.
iob diag inside:
```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi5 Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 12:40:05 up 7 min, 1 user, load average: 0.11, 0.35, 0.23 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-05-01 12:40:06 CEST Universal time: Fri 2026-05-01 10:40:06 UTC RTC time: Fri 2026-05-01 10:40:06 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': Bernd HOME=/home/Bernd GROUPS=Bernd adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/Bernd GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 2.8G 4.9G 15M 901M 5.7G Swap: 209M 0B 209M Total: 8.7G 2.8G 5.1G Active iob-Instances: 31 8062 M total memory 2628 M used memory 2450 M active memory 568 M inactive memory 4673 M free memory 87 M buffer memory 772 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 12:40:06 up 7 min, 1 user, load average: 0.18, 0.36, 0.24 Tasks: 225 total, 2 running, 223 sleeping, 0 stopped, 0 zombie %Cpu(s): 6.7 us, 0.0 sy, 0.0 ni, 91.1 id, 2.2 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8062.9 total, 4670.2 free, 2630.3 used, 860.9 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 5432.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 15M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 12G 16G 42% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 4.0G 96K 4.0G 1% /tmp tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service //192.168.178.37/home/backup/iobroker cifs 2.7T 1.8T 955G 66% /opt/iobroker/backups tmpfs tmpfs 807M 32K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri May 1 12:32:23 2026] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Fri May 1 12:32:25 2026] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/opt/iobroker/backups //192.168.178.37/home/backup/iobroker cifs rw,relatime,vers=3.1.1,cache=strict,upcall_target=app,username=backup,uid=1001,forceuid,gid=1001,forcegid,addr=192.168.178.37,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,reparse=nfs,rsize=4194304,wsize=4194304,bsize=1048576,retrans=1,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 3.6G /var/ 2.8G /var/log/journal/9ba9919aad384e6eaaa1e9cb2eaa4832 2.8G /var/log/journal 2.8G /var/log 373M /var/cache Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 185M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 858M /opt/iobroker/iobroker-data/ 504M /opt/iobroker/iobroker-data/files 194M /opt/iobroker/iobroker-data/history 121M /opt/iobroker/iobroker-data/files/vis 114M /opt/iobroker/iobroker-data/files/vis/widgets The five largest files in iobroker-data are: 28M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 18M /opt/iobroker/iobroker-data/states.jsonl 16M /opt/iobroker/iobroker-data/files/vis-2.0/New project/vis-views.json 15M /opt/iobroker/iobroker-data/files/vis-2.0/vis-views.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v20.20.2 /usr/bin/node v20.20.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 ✓ Node.js installation is correct nodejs: Installed: 20.20.2-1nodesource1 Candidate: 20.20.2-1nodesource1 Version table: *** 20.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.6-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.5-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: ██████ █████ ███ ██ ██████ ███████ ███████ ██ ██ ██ ██ ████ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ██ ███ █████ ███████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██████ ██ ██ ██ ████ ██████ ███████ ██ ██ v20.20.2 is end-of-life. There are high chances of being vulnerable. Please upgrade it. *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi5 raspberrypi5 (version: 7.0.7, hostname: raspberrypi5 , alive, uptime: 453) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 1 | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspberrypi5 - disabled + system.adapter.backitup.0 : backitup : raspberrypi5 - enabled + system.adapter.cloud.0 : cloud : raspberrypi5 - enabled system.adapter.daswetter.0 : daswetter : raspberrypi5 - disabled system.adapter.devices.0 : devices : raspberrypi5 - disabled + system.adapter.discovery.0 : discovery : raspberrypi5 - enabled system.adapter.dwd.0 : dwd : raspberrypi5 - disabled + system.adapter.echarts.0 : echarts : raspberrypi5 - enabled system.adapter.feiertage.0 : feiertage : raspberrypi5 - disabled + system.adapter.fronius-solarweb.0 : fronius-solarweb : raspberrypi5 - enabled + system.adapter.fronius.0 : fronius : raspberrypi5 - enabled + system.adapter.fronius.1 : fronius : raspberrypi5 - enabled + system.adapter.history.0 : history : raspberrypi5 - enabled system.adapter.ical.0 : ical : raspberrypi5 - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi5 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi5 - disabled system.adapter.influxdb.0 : influxdb : raspberrypi5 - disabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi5 - enabled + system.adapter.iqontrol.0 : iqontrol : raspberrypi5 - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.javascript.0 : javascript : raspberrypi5 - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.ping.0 : ping : raspberrypi5 - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi5 - enabled + system.adapter.scenes.0 : scenes : raspberrypi5 - enabled + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi5 - enabled system.adapter.sql.0 : sql : raspberrypi5 - disabled, port: 3306 + system.adapter.synology.0 : synology : raspberrypi5 - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi5 - enabled + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi5 - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi5 - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi5 - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi5 - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: raspberrypi5 - disabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: raspberrypi5 - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi5 - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi5 - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi5 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi5 - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi5 - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi5 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi5 - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi5 - disabled system.adapter.vis.0 : vis : raspberrypi5 - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi5 - enabled + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi5 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.jarvis.0 : jarvis : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi5 - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 4.5.3 , installed 4.5.3 Adapter "devices" : 1.2.14 , installed 1.2.14 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "feiertage" : 1.3.0 , installed 1.3.0 Adapter "fronius" : 2.2.0 , installed 2.2.0 Adapter "fronius-solarweb": 0.0.3 , installed 0.0.3 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "ical" : 1.20.0 , installed 1.20.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "rpi2" : 3.0.2 , installed 2.4.0 [Updatable] Adapter "scenes" : 4.0.4 , installed 4.0.4 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.1.3 Adapter "sonoff" : 3.3.0 , installed 3.3.0 Adapter "sql" : 3.0.1 , installed 3.0.1 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 2.0.2, installed 2.0.2 Adapter "vis-2-widgets-inventwo": 0.7.2, installed 0.7.2 Adapter "vis-2-widgets-jaeger-design": 1.4.19, installed 1.4.19 Adapter "vis-2-widgets-material": 1.6.1, installed 1.6.1 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.6.0 , installed 1.6.0 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Objects and States Please stand by - This may take a while Objects: 14053 States: 11479 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://deb.nodesource.com/node_20.x nodistro InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z W: Failed to fetch https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian-security trixie-security InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Err:5 https://deb.nodesource.com/node_20.x nodistro InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://deb.nodesource.com/node_20.x nodistro InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z W: Failed to fetch https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6F71F525282841EEDAF851B42F59B5F99B1BE0B4 is not bound: No binding signature at time 2026-04-30T12:44:55Z because: Policy rejected non-revocation signature (PositiveCertification) requiring second pre-image resistance because: SHA1 is not considered secure since 2026-02-01T00:00:00Z W: Some index files failed to download. They have been ignored, or old ones used instead. Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 7574 1172/exim4 tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 10227 1730/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7457 885/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 7001 874/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 8368 874/iobroker.js-con tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 9573 1335/node-red tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 8943 1538/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 9954 1603/io.sonoff.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 10658 1586/io.mqtt.0 tcp6 0 0 :::22 :::* LISTEN 0 7459 885/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 7575 1172/exim4 tcp6 0 0 :::8081 :::* LISTEN 1001 10265 906/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 10749 1665/io.web.0 udp 0 0 0.0.0.0:46980 0.0.0.0:* 104 7340 698/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7338 698/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 9920 1571/io.shelly.1 udp6 0 0 fe80::5c42:ca8c:448:546 :::* 0 8529 788/NetworkManager udp6 0 0 fe80::dc25:f03d:c31:546 :::* 0 8410 788/NetworkManager udp6 0 0 :::5353 :::* 104 7339 698/avahi-daemon: r udp6 0 0 :::34331 :::* 104 7341 698/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-05-01 12:34:50.786 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:35:06.037 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:35:21.293 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:35:36.637 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:35:51.914 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:36:07.201 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:36:22.492 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:36:37.847 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:36:53.115 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:37:08.405 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:37:23.664 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:37:38.922 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:37:54.175 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:38:09.454 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:38:24.728 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:38:29.624 - info: shelly.0 (1538) [MQTT] Device with client id "shellytrv-8CF681B6FADA" connected from 192.168.178.94! 2026-05-01 12:38:33.465 - info: shelly.0 (1538) [MQTT] Device with client id "shellytrv-8CF681B6FADA" initialized. 2026-05-01 12:38:39.996 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:38:55.338 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:39:10.633 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:39:25.902 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:39:41.181 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:39:56.484 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:40:11.764 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 12:40:27.045 - info: shelly.0 (1538) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details)Nein, keine SD....SSD, da läuft das system drauf
Nein, das stimmt nicht:
/dev/mmcblk0p2 ext4 29G 12G 16G 42% /sowie
Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/opt/iobroker/backups //192.168.178.37/home/backup/iobroker cifs rw,relatime,vers=3.1.1,cache=strict,upcall_target=app,username=backup,uid=1001,forceuid,gid=1001,forcegid,addr=192.168.178.37,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,reparse=nfs,rsize=4194304,wsize=4194304,bsize=1048576,retrans=1,echo_interval=60,actimeo=1,closetimeo=1zeigen, dass dein System auf einer SD-Karte liegt. SSDs werden als /dev/sdXY angelegt. So wie auf meinem System z. B.:
/dev/sda2 ext4 110G 16G 89G 16% / Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-roJetzt noch nodejs auf Version 22 bringen.
iob nodejs-update 22 -
Nein, keine SD....SSD, da läuft das system drauf
Nein, das stimmt nicht:
/dev/mmcblk0p2 ext4 29G 12G 16G 42% /sowie
Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/opt/iobroker/backups //192.168.178.37/home/backup/iobroker cifs rw,relatime,vers=3.1.1,cache=strict,upcall_target=app,username=backup,uid=1001,forceuid,gid=1001,forcegid,addr=192.168.178.37,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,reparse=nfs,rsize=4194304,wsize=4194304,bsize=1048576,retrans=1,echo_interval=60,actimeo=1,closetimeo=1zeigen, dass dein System auf einer SD-Karte liegt. SSDs werden als /dev/sdXY angelegt. So wie auf meinem System z. B.:
/dev/sda2 ext4 110G 16G 89G 16% / Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-roJetzt noch nodejs auf Version 22 bringen.
iob nodejs-update 22Jetzt noch nodejs auf Version 22 bringen.Erledigt:
```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi5 Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 15:23:51 up 2:51, 1 user, load average: 0.37, 0.30, 0.37 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-05-01 15:23:51 CEST Universal time: Fri 2026-05-01 13:23:51 UTC RTC time: Fri 2026-05-01 13:23:51 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': Bernd HOME=/home/Bernd GROUPS=Bernd adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/Bernd GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 3.3G 3.0G 25M 2.2G 5.1G Swap: 209M 0B 209M Total: 8.7G 3.3G 3.3G Active iob-Instances: 31 8062 M total memory 3190 M used memory 2902 M active memory 1765 M inactive memory 2903 M free memory 297 M buffer memory 1782 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 15:23:52 up 2:51, 1 user, load average: 0.37, 0.30, 0.37 Tasks: 218 total, 1 running, 217 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.4 us, 0.0 sy, 0.0 ni, 97.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8062.9 total, 2901.2 free, 3192.6 used, 2080.0 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 4870.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 15M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 12G 16G 42% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 4.0G 8.9M 4.0G 1% /tmp tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 807M 32K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri May 1 12:32:23 2026] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Fri May 1 12:32:25 2026] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.6G /var/ 2.8G /var/log/journal/9ba9919aad384e6eaaa1e9cb2eaa4832 2.8G /var/log/journal 2.8G /var/log 408M /var/cache Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 284M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 851M /opt/iobroker/iobroker-data/ 504M /opt/iobroker/iobroker-data/files 194M /opt/iobroker/iobroker-data/history 121M /opt/iobroker/iobroker-data/files/vis 114M /opt/iobroker/iobroker-data/files/vis/widgets The five largest files in iobroker-data are: 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 25M /opt/iobroker/iobroker-data/objects.jsonl 16M /opt/iobroker/iobroker-data/files/vis-2.0/New project/vis-views.json 15M /opt/iobroker/iobroker-data/files/vis-2.0/vis-views.json 14M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi5 raspberrypi5 (version: 7.0.7, hostname: raspberrypi5 , alive, uptime: 1127) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 1 | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspberrypi5 - disabled + system.adapter.backitup.0 : backitup : raspberrypi5 - enabled + system.adapter.cloud.0 : cloud : raspberrypi5 - enabled system.adapter.daswetter.0 : daswetter : raspberrypi5 - disabled system.adapter.devices.0 : devices : raspberrypi5 - disabled + system.adapter.discovery.0 : discovery : raspberrypi5 - enabled system.adapter.dwd.0 : dwd : raspberrypi5 - disabled + system.adapter.echarts.0 : echarts : raspberrypi5 - enabled system.adapter.feiertage.0 : feiertage : raspberrypi5 - disabled + system.adapter.fronius-solarweb.0 : fronius-solarweb : raspberrypi5 - enabled + system.adapter.fronius.0 : fronius : raspberrypi5 - enabled + system.adapter.fronius.1 : fronius : raspberrypi5 - enabled + system.adapter.history.0 : history : raspberrypi5 - enabled system.adapter.ical.0 : ical : raspberrypi5 - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi5 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi5 - disabled system.adapter.influxdb.0 : influxdb : raspberrypi5 - disabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi5 - enabled + system.adapter.iqontrol.0 : iqontrol : raspberrypi5 - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.javascript.0 : javascript : raspberrypi5 - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.ping.0 : ping : raspberrypi5 - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi5 - enabled + system.adapter.scenes.0 : scenes : raspberrypi5 - enabled + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi5 - enabled system.adapter.sql.0 : sql : raspberrypi5 - disabled, port: 3306 + system.adapter.synology.0 : synology : raspberrypi5 - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi5 - enabled + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi5 - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi5 - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi5 - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi5 - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: raspberrypi5 - disabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: raspberrypi5 - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi5 - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi5 - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi5 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi5 - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi5 - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi5 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi5 - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi5 - disabled system.adapter.vis.0 : vis : raspberrypi5 - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi5 - enabled + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi5 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.jarvis.0 : jarvis : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi5 - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 4.5.3 , installed 4.5.3 Adapter "devices" : 1.2.14 , installed 1.2.14 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "feiertage" : 1.3.0 , installed 1.3.0 Adapter "fronius" : 2.2.0 , installed 2.2.0 Adapter "fronius-solarweb": 0.0.3 , installed 0.0.3 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "ical" : 1.20.0 , installed 1.20.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "rpi2" : 3.0.2 , installed 2.4.0 [Updatable] Adapter "scenes" : 4.0.4 , installed 4.0.4 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.1.3 Adapter "sonoff" : 3.3.0 , installed 3.3.0 Adapter "sql" : 3.0.1 , installed 3.0.1 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 2.0.2, installed 2.0.2 Adapter "vis-2-widgets-inventwo": 0.7.2, installed 0.7.2 Adapter "vis-2-widgets-jaeger-design": 1.4.19, installed 1.4.19 Adapter "vis-2-widgets-material": 1.6.1, installed 1.6.1 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.6.0 , installed 1.6.0 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Objects and States Please stand by - This may take a while Objects: 14320 States: 11737 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian-security trixie-security InRelease Hit:3 http://archive.raspberrypi.com/debian trixie InRelease Hit:4 http://deb.debian.org/debian trixie-updates InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 7574 1172/exim4 tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 365179 8198/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7457 885/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 363025 7597/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 363030 7597/iobroker.js-co tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 362300 7787/node-red tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 365774 7994/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 364810 8062/io.sonoff.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 364759 8045/io.mqtt.0 tcp6 0 0 :::22 :::* LISTEN 0 7459 885/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 7575 1172/exim4 tcp6 0 0 :::8081 :::* LISTEN 1001 362102 7621/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 365036 8129/io.web.0 udp 0 0 0.0.0.0:46980 0.0.0.0:* 104 7340 698/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7338 698/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 364725 8029/io.shelly.1 udp6 0 0 fe80::5c42:ca8c:448:546 :::* 0 8529 788/NetworkManager udp6 0 0 fe80::dc25:f03d:c31:546 :::* 0 8410 788/NetworkManager udp6 0 0 :::5353 :::* 104 7339 698/avahi-daemon: r udp6 0 0 :::34331 :::* 104 7341 698/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-05-01 15:20:22.608 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:20:37.864 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:20:53.118 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:21:08.428 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:21:23.819 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:21:28.622 - info: web.0 (8129) <== Disconnect system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:21:29.633 - info: web.0 (8129) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:21:39.077 - info: web.0 (8129) <== Disconnect system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:21:39.129 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:21:40.055 - info: web.0 (8129) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:21:54.415 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:22:02.608 - info: admin.0 (7621) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:22:09.808 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:22:25.588 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:22:27.252 - info: admin.0 (7621) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:22:40.914 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:22:56.201 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:23:05.864 - warn: backitup.0 (7799) [iobroker/clean] No older backup files are deleted, because this backup was started manually 2026-05-01 15:23:11.495 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:23:25.210 - info: web.0 (8129) <== Disconnect system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:23:26.085 - info: web.0 (8129) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:23:26.781 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:23:42.086 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:23:57.350 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:24:12.629 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) -
Jetzt noch nodejs auf Version 22 bringen.Erledigt:
```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi5 Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 15:23:51 up 2:51, 1 user, load average: 0.37, 0.30, 0.37 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-05-01 15:23:51 CEST Universal time: Fri 2026-05-01 13:23:51 UTC RTC time: Fri 2026-05-01 13:23:51 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': Bernd HOME=/home/Bernd GROUPS=Bernd adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/Bernd GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 3.3G 3.0G 25M 2.2G 5.1G Swap: 209M 0B 209M Total: 8.7G 3.3G 3.3G Active iob-Instances: 31 8062 M total memory 3190 M used memory 2902 M active memory 1765 M inactive memory 2903 M free memory 297 M buffer memory 1782 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 15:23:52 up 2:51, 1 user, load average: 0.37, 0.30, 0.37 Tasks: 218 total, 1 running, 217 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.4 us, 0.0 sy, 0.0 ni, 97.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8062.9 total, 2901.2 free, 3192.6 used, 2080.0 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 4870.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 15M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 12G 16G 42% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 4.0G 8.9M 4.0G 1% /tmp tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 807M 32K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri May 1 12:32:23 2026] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Fri May 1 12:32:25 2026] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.6G /var/ 2.8G /var/log/journal/9ba9919aad384e6eaaa1e9cb2eaa4832 2.8G /var/log/journal 2.8G /var/log 408M /var/cache Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 284M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 851M /opt/iobroker/iobroker-data/ 504M /opt/iobroker/iobroker-data/files 194M /opt/iobroker/iobroker-data/history 121M /opt/iobroker/iobroker-data/files/vis 114M /opt/iobroker/iobroker-data/files/vis/widgets The five largest files in iobroker-data are: 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 25M /opt/iobroker/iobroker-data/objects.jsonl 16M /opt/iobroker/iobroker-data/files/vis-2.0/New project/vis-views.json 15M /opt/iobroker/iobroker-data/files/vis-2.0/vis-views.json 14M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi5 raspberrypi5 (version: 7.0.7, hostname: raspberrypi5 , alive, uptime: 1127) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 1 | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspberrypi5 - disabled + system.adapter.backitup.0 : backitup : raspberrypi5 - enabled + system.adapter.cloud.0 : cloud : raspberrypi5 - enabled system.adapter.daswetter.0 : daswetter : raspberrypi5 - disabled system.adapter.devices.0 : devices : raspberrypi5 - disabled + system.adapter.discovery.0 : discovery : raspberrypi5 - enabled system.adapter.dwd.0 : dwd : raspberrypi5 - disabled + system.adapter.echarts.0 : echarts : raspberrypi5 - enabled system.adapter.feiertage.0 : feiertage : raspberrypi5 - disabled + system.adapter.fronius-solarweb.0 : fronius-solarweb : raspberrypi5 - enabled + system.adapter.fronius.0 : fronius : raspberrypi5 - enabled + system.adapter.fronius.1 : fronius : raspberrypi5 - enabled + system.adapter.history.0 : history : raspberrypi5 - enabled system.adapter.ical.0 : ical : raspberrypi5 - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi5 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi5 - disabled system.adapter.influxdb.0 : influxdb : raspberrypi5 - disabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi5 - enabled + system.adapter.iqontrol.0 : iqontrol : raspberrypi5 - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.javascript.0 : javascript : raspberrypi5 - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.ping.0 : ping : raspberrypi5 - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi5 - enabled + system.adapter.scenes.0 : scenes : raspberrypi5 - enabled + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi5 - enabled system.adapter.sql.0 : sql : raspberrypi5 - disabled, port: 3306 + system.adapter.synology.0 : synology : raspberrypi5 - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi5 - enabled + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi5 - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi5 - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi5 - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi5 - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: raspberrypi5 - disabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: raspberrypi5 - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi5 - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi5 - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi5 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi5 - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi5 - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi5 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi5 - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi5 - disabled system.adapter.vis.0 : vis : raspberrypi5 - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi5 - enabled + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi5 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.jarvis.0 : jarvis : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi5 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi5 - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 4.5.3 , installed 4.5.3 Adapter "devices" : 1.2.14 , installed 1.2.14 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "feiertage" : 1.3.0 , installed 1.3.0 Adapter "fronius" : 2.2.0 , installed 2.2.0 Adapter "fronius-solarweb": 0.0.3 , installed 0.0.3 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "ical" : 1.20.0 , installed 1.20.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "rpi2" : 3.0.2 , installed 2.4.0 [Updatable] Adapter "scenes" : 4.0.4 , installed 4.0.4 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.0.8 , installed 7.1.3 Adapter "sonoff" : 3.3.0 , installed 3.3.0 Adapter "sql" : 3.0.1 , installed 3.0.1 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 2.0.2, installed 2.0.2 Adapter "vis-2-widgets-inventwo": 0.7.2, installed 0.7.2 Adapter "vis-2-widgets-jaeger-design": 1.4.19, installed 1.4.19 Adapter "vis-2-widgets-material": 1.6.1, installed 1.6.1 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.6.0 , installed 1.6.0 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Objects and States Please stand by - This may take a while Objects: 14320 States: 11737 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian-security trixie-security InRelease Hit:3 http://archive.raspberrypi.com/debian trixie InRelease Hit:4 http://deb.debian.org/debian trixie-updates InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 7574 1172/exim4 tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 365179 8198/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7457 885/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 363025 7597/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 363030 7597/iobroker.js-co tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 362300 7787/node-red tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 365774 7994/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 364810 8062/io.sonoff.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 364759 8045/io.mqtt.0 tcp6 0 0 :::22 :::* LISTEN 0 7459 885/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 7575 1172/exim4 tcp6 0 0 :::8081 :::* LISTEN 1001 362102 7621/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 365036 8129/io.web.0 udp 0 0 0.0.0.0:46980 0.0.0.0:* 104 7340 698/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7338 698/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 364725 8029/io.shelly.1 udp6 0 0 fe80::5c42:ca8c:448:546 :::* 0 8529 788/NetworkManager udp6 0 0 fe80::dc25:f03d:c31:546 :::* 0 8410 788/NetworkManager udp6 0 0 :::5353 :::* 104 7339 698/avahi-daemon: r udp6 0 0 :::34331 :::* 104 7341 698/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-05-01 15:20:22.608 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:20:37.864 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:20:53.118 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:21:08.428 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:21:23.819 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:21:28.622 - info: web.0 (8129) <== Disconnect system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:21:29.633 - info: web.0 (8129) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:21:39.077 - info: web.0 (8129) <== Disconnect system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:21:39.129 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:21:40.055 - info: web.0 (8129) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:21:54.415 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:22:02.608 - info: admin.0 (7621) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:22:09.808 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:22:25.588 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:22:27.252 - info: admin.0 (7621) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:22:40.914 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:22:56.201 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:23:05.864 - warn: backitup.0 (7799) [iobroker/clean] No older backup files are deleted, because this backup was started manually 2026-05-01 15:23:11.495 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:23:25.210 - info: web.0 (8129) <== Disconnect system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:23:26.085 - info: web.0 (8129) ==> Connected system.user.admin from ::ffff:192.168.178.22 2026-05-01 15:23:26.781 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:23:42.086 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:23:57.350 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details) 2026-05-01 15:24:12.629 - info: shelly.0 (7994) [authEnabled] 192.168.178.101 (shellyplus2pm / shellyplus2pm-a0dd6cbe021c / shellyplus2pm#a0dd6cbe021c#1): This device is not protected via restricted login (see adapter documentation for details)Dann ist jetzt ja deine Basis auf einem aktuellen Stand und du kannst weiter machen.
rpi2-Adapter z. B. noch updaten. -
Dann ist jetzt ja deine Basis auf einem aktuellen Stand und du kannst weiter machen.
rpi2-Adapter z. B. noch updaten.Dann ist jetzt ja deine Basis auf einem aktuellen Stand und du kannst weiter machen.
rpi2-Adapter z. B. noch updaten.den nutz ich aktuell eh nicht und der interessiert mich gerade auch ned wirklich.
der SA muss wieder funktionieren.
Also die Pfade in der VIS passen, der SA spuckt keine werte, bzw nur 0 aus.und was heisst weiter machen, womit denn?
-
Dann ist jetzt ja deine Basis auf einem aktuellen Stand und du kannst weiter machen.
rpi2-Adapter z. B. noch updaten.den nutz ich aktuell eh nicht und der interessiert mich gerade auch ned wirklich.
der SA muss wieder funktionieren.
Also die Pfade in der VIS passen, der SA spuckt keine werte, bzw nur 0 aus.und was heisst weiter machen, womit denn?
-
und was heisst weiter machen, womit denn?
Dann damit deine verwendeten Adapter in Betrieb zu nehmen.
Die laufen doch jetzt soweit alle, bis auf den SA.
Und schmeiß nicht verwendete Adapter raus. Macht die Codebasis kleiner, macht das System stabiler und leichter zu unterhalten.
ja müsste ich mal machen tatsächlich
-
und was heisst weiter machen, womit denn?
Dann damit deine verwendeten Adapter in Betrieb zu nehmen.
Die laufen doch jetzt soweit alle, bis auf den SA.
Und schmeiß nicht verwendete Adapter raus. Macht die Codebasis kleiner, macht das System stabiler und leichter zu unterhalten.
ja müsste ich mal machen tatsächlich
-
Dann halt mit dem weiter machen...
Was soll ich mit dem machen, wenn er nicht gewartet wird?
Er funktioniert seid den Updates nicht mehr.die neuere Version hatte ich ja schon drauf bevor ich das Backup eingespielt habe, die hatte ja auch nicht mehr funktioniert.
ich hatte vorhin nochmal versucht den SA upzudaten, der hat auch irgendwas installiert, bleibt aber bei der 14er version
-
Dann halt mit dem weiter machen...
Was soll ich mit dem machen, wenn er nicht gewartet wird?
Er funktioniert seid den Updates nicht mehr.die neuere Version hatte ich ja schon drauf bevor ich das Backup eingespielt habe, die hatte ja auch nicht mehr funktioniert.
ich hatte vorhin nochmal versucht den SA upzudaten, der hat auch irgendwas installiert, bleibt aber bei der 14er version
Was soll ich mit dem machen, wenn er nicht gewartet wird?
Das bedeutet, dass es kein Release über das von dir verwendete Repository gibt. Der Adapter befindet sich warum auch immer im 'ewigen Beta'-Zustand. Wird sich wohl nur ändern, wenn geneigte Tester wie du mit verwertbaren Issues bei GitHub zur Entwicklung beiträgst.
sourceanalytix github: 0.4.15-alpha.1 latest: 0.4.14 for 50 months stable: -.-.-Du wirst wohl die Beta 0.4.14 installieren müssen, ggfls. auch die Alpha aus dem GitHub fischen müssen.
Genaue Fehlermeldungen und genaue Beschreibungen des Fehlverhaltens sind dann von deiner Seite unerlässlich.
-
Was soll ich mit dem machen, wenn er nicht gewartet wird?
Das bedeutet, dass es kein Release über das von dir verwendete Repository gibt. Der Adapter befindet sich warum auch immer im 'ewigen Beta'-Zustand. Wird sich wohl nur ändern, wenn geneigte Tester wie du mit verwertbaren Issues bei GitHub zur Entwicklung beiträgst.
sourceanalytix github: 0.4.15-alpha.1 latest: 0.4.14 for 50 months stable: -.-.-Du wirst wohl die Beta 0.4.14 installieren müssen, ggfls. auch die Alpha aus dem GitHub fischen müssen.
Genaue Fehlermeldungen und genaue Beschreibungen des Fehlverhaltens sind dann von deiner Seite unerlässlich.
@Thomas-Braun sagte:
uface sagte:Du wirst wohl die Beta 0.4.14 installieren müssen, ggfls. auch die Alpha aus dem GitHub fischen müssen. Genaue Fehlermeldungen und genaue Beschreibungen des Fehlverhaltens sind dann von deiner Seite unerlässlich.ja die ist doch installiert...was soll ich denn noch machen?
sie ist installiert und läuft nicht...keine errormeldungen...nix.
der spuckt einfach keine Werte mehr aus.
-
@Thomas-Braun sagte:
uface sagte:Du wirst wohl die Beta 0.4.14 installieren müssen, ggfls. auch die Alpha aus dem GitHub fischen müssen. Genaue Fehlermeldungen und genaue Beschreibungen des Fehlverhaltens sind dann von deiner Seite unerlässlich.ja die ist doch installiert...was soll ich denn noch machen?
sie ist installiert und läuft nicht...keine errormeldungen...nix.
der spuckt einfach keine Werte mehr aus.
-
Ich habe die 0.4.14 schon sehr lange laufen und sie funktioniert. Es kann nicht an dem Adapter (bzw. an der Version) liegen.
Alle Daten in SourceAnalytix sind stimmig. Das habe ich sehr oft mit eigenen Skripten verglichen. Mittlerweile vertraue ich den Angaben voll.
Das Einzige, was mir in dem Adapter fehlt, ist ein json. Das baue ich mir in mit einem JavaScript selbst aus den Daten von SourceAnalytix zusammen.
Ich weiß, es hilft dir leider nicht weiter. Wollte aber kurz anmerken, das die Version stabil läuft. Warum @dutchman sie nicht ins Stable schickt, kann ich nicht nachvollziehen.
-
@Thomas-Braun sagte:
uface sagte:Du wirst wohl die Beta 0.4.14 installieren müssen, ggfls. auch die Alpha aus dem GitHub fischen müssen. Genaue Fehlermeldungen und genaue Beschreibungen des Fehlverhaltens sind dann von deiner Seite unerlässlich.ja die ist doch installiert...was soll ich denn noch machen?
sie ist installiert und läuft nicht...keine errormeldungen...nix.
der spuckt einfach keine Werte mehr aus.
-
@Thomas-Braun sagte:
uface sagte:Du wirst wohl die Beta 0.4.14 installieren müssen, ggfls. auch die Alpha aus dem GitHub fischen müssen. Genaue Fehlermeldungen und genaue Beschreibungen des Fehlverhaltens sind dann von deiner Seite unerlässlich.ja die ist doch installiert...was soll ich denn noch machen?
sie ist installiert und läuft nicht...keine errormeldungen...nix.
der spuckt einfach keine Werte mehr aus.
der spuckt einfach keine Werte mehr aus.
Hast du mal geprüft ob die entsprechenden Ursprungsdatenpunkte noch mit sourceanalytix verbunden sind?
-
@Thomas-Braun achwas
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@Thomas-Braun achwas
Du bist einfach zu flink für mich, du Wiesel...
-
Du bist einfach zu flink für mich, du Wiesel...
@Thomas-Braun war jetzt extra stundenlang awk 😉
-
Was soll ich mit dem machen, wenn er nicht gewartet wird?
Das bedeutet, dass es kein Release über das von dir verwendete Repository gibt. Der Adapter befindet sich warum auch immer im 'ewigen Beta'-Zustand. Wird sich wohl nur ändern, wenn geneigte Tester wie du mit verwertbaren Issues bei GitHub zur Entwicklung beiträgst.
sourceanalytix github: 0.4.15-alpha.1 latest: 0.4.14 for 50 months stable: -.-.-Du wirst wohl die Beta 0.4.14 installieren müssen, ggfls. auch die Alpha aus dem GitHub fischen müssen.
Genaue Fehlermeldungen und genaue Beschreibungen des Fehlverhaltens sind dann von deiner Seite unerlässlich.
Der Adapter befindet sich warum auch immer im 'ewigen Beta'-Zustand
Weil er schon seit geraumer Zeit an einer komplett überarbeiteten Version in typescript arbeitet, so weit ich weiß
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
511
Online32.8k
Benutzer82.9k
Themen1.3m
Beiträge