apt update Fehlermeldungen bei taufrischem rapsi os / trixie
-
Soll ich das versuchen?
sudo apt install raspberrypi-archive-keyring
Stammt aber von Googles KI (!)
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
Soll ich das versuchen?
sudo apt install raspberrypi-archive-keyring
Stammt aber von Googles KI (!)
@mcm1957 Kannste probieren, allerdings wird dir apt sagen, das dieses Paket bereits installiert ist.
Schau mal in die Quelle rein:
cat /etc/apt/sources.list.d/raspi.sourcesoder
cat /etc/apt/sources.list.d/raspi.list -
Mehr als die SSD nochmals zu flashen kann ja nicht passieren. Das mach ich jetzt schon im Schlaf. Das der neue Pi nicht gebootet hat hab ich zig mal Kabel kontrolliert, SSD neu initialisisert, etc. etc. Irgendwann hab ich dann den Hinweis gefunden dass das EEPROM ev. nicht i.O. ist und dass es beim Rapsi Imager ein Flashtool fpr den Raspi gibt - da auf die SD und - BINGO. Alles geht wie geplant. Nur jetzt spinnt noch das OS.
Ist heut wohl nicht mein Tag :-(
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
Mehr als die SSD nochmals zu flashen kann ja nicht passieren. Das mach ich jetzt schon im Schlaf. Das der neue Pi nicht gebootet hat hab ich zig mal Kabel kontrolliert, SSD neu initialisisert, etc. etc. Irgendwann hab ich dann den Hinweis gefunden dass das EEPROM ev. nicht i.O. ist und dass es beim Rapsi Imager ein Flashtool fpr den Raspi gibt - da auf die SD und - BINGO. Alles geht wie geplant. Nur jetzt spinnt noch das OS.
Ist heut wohl nicht mein Tag :-(
Die Datei schaut bei mir auch so aus:
thomas@testpi:~ $ cat /etc/apt/sources.list.d/raspi.sources Types: deb URIs: http://archive.raspberrypi.com/debian/ Suites: trixie Components: main Signed-By: /usr/share/keyrings/raspberrypi-archive-keyring.pgp thomas@testpi:~ $Ich würde da einfach den mirror sync abwarten.
-
Also die Probleme existieren zum Teil noch immer:
piadmin@Pi5:~ $ sudo apt update Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Ign:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en Get:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en [352 B] Err:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en 404 Not Found [IP: 151.101.130.132 80] File has unexpected size (4704 != 352). Mirror sync in progress? [IP: 151.101.130.132 80] Hashes of expected file: - Filesize:352 [weak] - SHA256:9ab2e06dbc0b5c8146230d0057eb2d9622da6916b69c584340cc92c2ff5bb5e1 Release file created at: Thu, 09 Apr 2026 18:22:42 +0000 Warning: Conflicting distribution: http://deb.debian.org/debian trixie InRelease (expected trixie but got trixie-security) Error: Failed to fetch http://deb.debian.org/debian/dists/trixie/non-free-firmware/i18n/Translation-en.xz File has unexpected size (4704 != 352). Mirror sync in progress? [IP: 151.101.130.132 80] Hashes of expected file: - Filesize:352 [weak] - SHA256:9ab2e06dbc0b5c8146230d0057eb2d9622da6916b69c584340cc92c2ff5bb5e1 Release file created at: Thu, 09 Apr 2026 18:22:42 +0000 Error: Some index files failed to download. They have been ignored, or old ones used instead. piadmin@Pi5:~ $Wenn ich das aber richtig kese, dann lädt der Update die Datei
Get:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en mit 4704 byte erwartet aber nur 352 (lt. Hashes of expected file).FRAGE:
Wo komen die hashes her? Werden die extra wo geladen?UND BITTE:
Kann ev wer von euch mal ein sudo apt update auf einem Pi 5 laufen lassen? Ich würd gern wissen ob das ev. ein generelles Problem der debian Sourcen ist und nicht am meinem neuen System liegt.Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
Also die Probleme existieren zum Teil noch immer:
piadmin@Pi5:~ $ sudo apt update Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Ign:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en Get:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en [352 B] Err:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en 404 Not Found [IP: 151.101.130.132 80] File has unexpected size (4704 != 352). Mirror sync in progress? [IP: 151.101.130.132 80] Hashes of expected file: - Filesize:352 [weak] - SHA256:9ab2e06dbc0b5c8146230d0057eb2d9622da6916b69c584340cc92c2ff5bb5e1 Release file created at: Thu, 09 Apr 2026 18:22:42 +0000 Warning: Conflicting distribution: http://deb.debian.org/debian trixie InRelease (expected trixie but got trixie-security) Error: Failed to fetch http://deb.debian.org/debian/dists/trixie/non-free-firmware/i18n/Translation-en.xz File has unexpected size (4704 != 352). Mirror sync in progress? [IP: 151.101.130.132 80] Hashes of expected file: - Filesize:352 [weak] - SHA256:9ab2e06dbc0b5c8146230d0057eb2d9622da6916b69c584340cc92c2ff5bb5e1 Release file created at: Thu, 09 Apr 2026 18:22:42 +0000 Error: Some index files failed to download. They have been ignored, or old ones used instead. piadmin@Pi5:~ $Wenn ich das aber richtig kese, dann lädt der Update die Datei
Get:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en mit 4704 byte erwartet aber nur 352 (lt. Hashes of expected file).FRAGE:
Wo komen die hashes her? Werden die extra wo geladen?UND BITTE:
Kann ev wer von euch mal ein sudo apt update auf einem Pi 5 laufen lassen? Ich würd gern wissen ob das ev. ein generelles Problem der debian Sourcen ist und nicht am meinem neuen System liegt.Kann ev wer von euch mal ein sudo apt update auf einem Pi 5 laufen lassen?
Hab ich gerade gemacht, ohne Probleme.
Das einzige Problem ist, dass der output nicht vollständig hierher zu bekommen ist.
Hab früher mit juice gearbeitet, gibbet nicht mehr, und mit Termius komme ich noch nicht klar.
Da fehlt nach scrollen die Mitteedit:
Bei erneutem Lauf ist natürlich nichts mehr zu tun$ sudo apt update Hit:1 http://archive.raspberrypi.com/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 http://deb.debian.org/debian-security trixie-security InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease All packages are up to date. puh@BrokerRaspi:~ $ sudo apt upgrade Summary: Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0 puh@BrokerRaspi:~ $ -
Also die Probleme existieren zum Teil noch immer:
piadmin@Pi5:~ $ sudo apt update Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Ign:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en Get:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en [352 B] Err:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en 404 Not Found [IP: 151.101.130.132 80] File has unexpected size (4704 != 352). Mirror sync in progress? [IP: 151.101.130.132 80] Hashes of expected file: - Filesize:352 [weak] - SHA256:9ab2e06dbc0b5c8146230d0057eb2d9622da6916b69c584340cc92c2ff5bb5e1 Release file created at: Thu, 09 Apr 2026 18:22:42 +0000 Warning: Conflicting distribution: http://deb.debian.org/debian trixie InRelease (expected trixie but got trixie-security) Error: Failed to fetch http://deb.debian.org/debian/dists/trixie/non-free-firmware/i18n/Translation-en.xz File has unexpected size (4704 != 352). Mirror sync in progress? [IP: 151.101.130.132 80] Hashes of expected file: - Filesize:352 [weak] - SHA256:9ab2e06dbc0b5c8146230d0057eb2d9622da6916b69c584340cc92c2ff5bb5e1 Release file created at: Thu, 09 Apr 2026 18:22:42 +0000 Error: Some index files failed to download. They have been ignored, or old ones used instead. piadmin@Pi5:~ $Wenn ich das aber richtig kese, dann lädt der Update die Datei
Get:5 http://deb.debian.org/debian trixie/non-free-firmware Translation-en mit 4704 byte erwartet aber nur 352 (lt. Hashes of expected file).FRAGE:
Wo komen die hashes her? Werden die extra wo geladen?UND BITTE:
Kann ev wer von euch mal ein sudo apt update auf einem Pi 5 laufen lassen? Ich würd gern wissen ob das ev. ein generelles Problem der debian Sourcen ist und nicht am meinem neuen System liegt.Warning: Conflicting distribution: http://deb.debian.org/debian trixie InRelease (expected trixie but got trixie-security)
Das kommt mir total spanisch vor. Für trixie-security gibt es ja eine eigene Quelle.
Das ist auch ganz sicher eine ganz frische Installation von einem ganz frischen Raspberry-ISO? -
So frisch wie der Raspberry Imager das macht.
Aber ich starte das Ganze nochmal neu. Ist ja noch nichts eingerichtet auf dem Ding...
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
So frisch wie der Raspberry Imager das macht.
Aber ich starte das Ganze nochmal neu. Ist ja noch nichts eingerichtet auf dem Ding...
Du kannst auch mal einen länderspezifischen Mirror eintragen. Der bei dem du da rauskommst scheint mir irgendwie neben der Spur zu laufen.
-
Irgendwie wird das Ganze gespenstisch:
Also ich habe mal die SSD komplett mit dem Imager neu eingerichtet (Scrennshot be Bedarf gerne). Den Image selbst hab ich auch extra neu runtergekladen und installiert.
Nach dem anstecken und der üblichen Wartezeit fürd einrichten dann der erste Login:
Linux Pi5 6.12.47+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.12.47-1+rpt1 (2025-09-16) aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. piadmin@Pi5:~ $Sieht also erstmal gut aus.
Dann ein erstes apt update:
piadmin@Pi5:~ $ sudo apt update Get:1 http://deb.debian.org/debian trixie InRelease [140 kB] Ign:2 http://deb.debian.org/debian trixie-updates InRelease Ign:3 http://deb.debian.org/debian-security trixie-security InRelease Ign:4 http://archive.raspberrypi.com/debian trixie InRelease Get:5 http://deb.debian.org/debian trixie-updates Release [45.7 kB] Get:6 http://archive.raspberrypi.com/debian trixie Release [54.3 kB] Get:7 http://deb.debian.org/debian-security trixie-security Release [41.8 kB] Get:8 http://deb.debian.org/debian trixie-updates Release.gpg [1,601 B] Get:9 http://deb.debian.org/debian-security trixie-security Release.gpg [1,601 B] Get:10 http://archive.raspberrypi.com/debian trixie Release.gpg [488 B] Get:11 http://deb.debian.org/debian trixie/main arm64 Packages [9,607 kB] Get:12 http://archive.raspberrypi.com/debian trixie/main arm64 Packages [424 kB] Get:13 http://archive.raspberrypi.com/debian trixie/main armhf Packages [419 kB] Get:14 http://deb.debian.org/debian trixie/main armhf Packages [9,237 kB] Get:15 http://deb.debian.org/debian trixie/main Translation-en [6,484 kB] Get:16 http://deb.debian.org/debian trixie/contrib arm64 Packages [48.4 kB] Get:17 http://deb.debian.org/debian trixie/contrib armhf Packages [42.6 kB] Get:18 http://deb.debian.org/debian-security trixie-security/main arm64 Packages [120 kB] Get:19 http://deb.debian.org/debian-security trixie-security/main armhf Packages [115 kB] Get:20 http://deb.debian.org/debian-security trixie-security/main Translation-en [76.0 kB] Fetched 26.9 MB in 4s (6,661 kB/s) 92 packages can be upgraded. Run 'apt list --upgradable' to see them. Notice: Repository 'http://deb.debian.org/debian trixie InRelease' changed its 'Version' value from '13.2' to '13.4' piadmin@Pi5:~ $Sieht zumindest für mich auch normal aus.
Dann nochmal ein apt update (war eigentlich nicht geplant, aber warum sollte das verboten sein?
piadmin@Pi5:~ $ sudo apt update Hit:1 http://deb.debian.org/debian trixie InRelease Err:1 http://deb.debian.org/debian trixie InRelease Splitting up /var/lib/apt/lists/deb.debian.org_debian_dists_trixie_InRelease into data and signature failed Get:2 http://deb.debian.org/debian trixie-updates InRelease [47.3 kB] Ign:3 http://deb.debian.org/debian-security trixie-security InRelease Ign:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 http://deb.debian.org/debian-security trixie-security Release Hit:7 http://archive.raspberrypi.com/debian trixie Release Fetched 47.3 kB in 0s (180 kB/s) 92 packages can be upgraded. Run 'apt list --upgradable' to see them. Warning: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: http://deb.debian.org/debian trixie InRelease: Splitting up /var/lib/apt/lists/deb.debian.org_debian_dists_trixie_InRelease into data and signature failed Warning: Failed to fetch http://deb.debian.org/debian/dists/trixie/InRelease Splitting up /var/lib/apt/lists/deb.debian.org_debian_dists_trixie_InRelease into data and signature failed Warning: Some index files failed to download. They have been ignored, or old ones used instead. piadmin@Pi5:~ $Also was zerstört da des erste oder zweite apt udpate !?!?
Oder soll ich einfach mal das eigentlich geplante apt upgrade laufen lassen? -
So, hab jetzt einfach mal ein apt upgrade gemacht.
piadmin@Pi5:~ $ sudo apt upgrade The following package was automatically installed and is no longer required: retry Use 'sudo apt autoremove' to remove it. Upgrading: base-files gpg-agent libglib2.0-0t64 linux-image-rpi-v8 raspi-utils-core bash gpg-wks-client libglib2.0-data linux-libc-dev raspi-utils-dt busybox gpgconf libgnutls30t64 linux-sysctl-defaults raspi-utils-eeprom dhcpcd-base gpgsm libgpiolib0 locales raspi-utils-otp dirmngr gpgv libnss3 logsave raspinfo dpkg libc-bin libpisp-common openssh-client rpi-cloud-init-mods dpkg-dev libc-dev-bin libpisp1 openssh-server rpi-connect-lite e2fsprogs libc-l10n libpng16-16t64 openssh-sftp-server rpi-eeprom exfatprogs libc6 libsqlite3-0 openssl rpicam-apps-lite firmware-atheros libc6-dev libss2 openssl-provider-legacy rsync firmware-brcm80211 libcap2 libssl3t64 python3-cryptography sq firmware-libertas libcap2-bin libtalloc2 python3-pip-whl sqv firmware-mediatek libcom-err2 libtiff6 python3-requests ssh firmware-realtek libdpkg-perl libwbclient0 python3-urllib3 sudo gnupg libdrm-common linux-base raspberrypi-sys-mods tzdata gnupg-l10n libdrm2 linux-headers-rpi-2712 raspi-config userconf-pi gnupg-utils libdtovl0 linux-headers-rpi-v8 raspi-config-core wireless-regdb gpg libext2fs2t64 linux-image-rpi-2712 raspi-utils Installing dependencies: linux-headers-6.12.75+rpt-common-rpi linux-headers-6.12.75+rpt-rpi-v8 linux-image-6.12.75+rpt-rpi-v8 linux-headers-6.12.75+rpt-rpi-2712 linux-image-6.12.75+rpt-rpi-2712 linux-kbuild-6.12.75+rpt Suggested packages: firmware-linux-free linux-doc-6.12 debian-kernel-handbook Not upgrading: libcamera-ipa librpicam-app1 rpicam-apps-core Summary: Upgrading: 89, Installing: 6, Removing: 0, Not Upgrading: 3 Download size: 241 MB Space needed: 177 MB / 963 GB available Continue? [Y/n] Get:1 http://deb.debian.org/debian trixie/main arm64 base-files arm64 13.8+deb13u4 [73.2 kB] Get:2 http://archive.raspberrypi.com/debian trixie/main arm64 libc6-dev arm64 2.41-12+rpt1+deb13u2 [2,355 kB] Get:3 http://deb.debian.org/debian trixie/main arm64 bash arm64 5.2.37-2+b8 [1,456 kB] Get:4 http://archive.raspberrypi.com/debian trixie/main arm64 libc-dev-bin arm64 2.41-12+rpt1+deb13u2 [63.0 kB] Get:5 http://archive.raspberrypi.com/debian trixie/main arm64 linux-libc-dev all 1:6.12.75-1+rpt1 [2,353 kB] Get:6 http://archive.raspberrypi.com/debian trixie/main arm64 libc6 arm64 2.41-12+rpt1+deb13u2 [5,184 kB] Get:7 http://deb.debian.org/debian trixie/main arm64 dpkg arm64 1.22.22 [1,521 kB] Get:8 http://archive.raspberrypi.com/debian trixie/main arm64 libc-bin arm64 2.41-12+rpt1+deb13u2 [766 kB] Get:9 http://archive.raspberrypi.com/debian trixie/main arm64 libc-l10n all 2.41-12+rpt1+deb13u2 [1,654 kB] Get:10 http://archive.raspberrypi.com/debian trixie/main arm64 locales all 2.41-12+rpt1+deb13u2 [5,108 kB] Get:11 http://deb.debian.org/debian trixie/main arm64 logsave arm64 1.47.2-3+b10 [24.8 kB] Get:12 http://deb.debian.org/debian trixie/main arm64 libext2fs2t64 arm64 1.47.2-3+b10 [205 kB] Get:13 http://deb.debian.org/debian trixie/main arm64 e2fsprogs arm64 1.47.2-3+b10 [566 kB] Get:14 http://deb.debian.org/debian-security trixie-security/main arm64 openssl-provider-legacy arm64 3.5.5-1~deb13u2 [308 kB] Get:15 http://deb.debian.org/debian-security trixie-security/main arm64 libssl3t64 arm64 3.5.5-1~deb13u2 [2,756 kB] Get:16 http://archive.raspberrypi.com/debian trixie/main arm64 firmware-atheros all 1:20250410-2+rpt1 [44.1 MB] Get:17 http://deb.debian.org/debian-security trixie-security/main arm64 openssh-sftp-server arm64 1:10.0p1-7+deb13u2 [60.6 kB] Get:18 http://deb.debian.org/debian-security trixie-security/main arm64 openssh-server arm64 1:10.0p1-7+deb13u2 [553 kB] Get:19 http://deb.debian.org/debian-security trixie-security/main arm64 openssh-client arm64 1:10.0p1-7+deb13u2 [926 kB] Get:20 http://deb.debian.org/debian trixie/main arm64 libcom-err2 arm64 1.47.2-3+b10 [24.9 kB] Get:21 http://deb.debian.org/debian trixie/main arm64 rsync arm64 3.4.1+ds1-5+deb13u1 [408 kB] Get:22 http://deb.debian.org/debian trixie/main arm64 sudo arm64 1.9.16p2-3+deb13u1 [1,990 kB] Get:23 http://deb.debian.org/debian trixie/main arm64 libcap2 arm64 1:2.75-10+b8 [28.2 kB] Get:24 http://deb.debian.org/debian trixie/main arm64 libsqlite3-0 arm64 3.46.1-7+deb13u1 [854 kB] Get:25 http://deb.debian.org/debian trixie/main arm64 dpkg-dev all 1.22.22 [1,337 kB] Get:26 http://deb.debian.org/debian trixie/main arm64 libdpkg-perl all 1.22.22 [651 kB] Get:27 http://deb.debian.org/debian trixie/main arm64 sqv arm64 1.3.0-3+b2 [612 kB] Get:28 http://deb.debian.org/debian trixie/main arm64 tzdata all 2026a-0+deb13u1 [264 kB] Get:29 http://deb.debian.org/debian trixie/main arm64 dhcpcd-base arm64 1:10.1.0-11+deb13u2 [188 kB] Get:30 http://deb.debian.org/debian trixie/main arm64 linux-sysctl-defaults all 4.12.1 [5,724 B] Get:31 http://deb.debian.org/debian trixie/main arm64 busybox arm64 1:1.37.0-6+b7 [455 kB] Get:32 http://deb.debian.org/debian trixie/main arm64 gpgsm arm64 2.4.7-21+deb13u1+b2 [252 kB] Get:33 http://deb.debian.org/debian trixie/main arm64 gnupg-utils arm64 2.4.7-21+deb13u1+b2 [182 kB] Get:34 http://deb.debian.org/debian trixie/main arm64 gpg-wks-client arm64 2.4.7-21+deb13u1+b2 [102 kB] Get:35 http://deb.debian.org/debian trixie/main arm64 gpg arm64 2.4.7-21+deb13u1+b2 [578 kB] Get:36 http://deb.debian.org/debian trixie/main arm64 dirmngr arm64 2.4.7-21+deb13u1+b2 [359 kB] Get:37 http://deb.debian.org/debian trixie/main arm64 gnupg all 2.4.7-21+deb13u1 [417 kB] Get:38 http://deb.debian.org/debian trixie/main arm64 gpgconf arm64 2.4.7-21+deb13u1+b2 [122 kB] Get:39 http://deb.debian.org/debian trixie/main arm64 gpg-agent arm64 2.4.7-21+deb13u1+b2 [250 kB] Get:40 http://deb.debian.org/debian trixie/main arm64 gnupg-l10n all 2.4.7-21+deb13u1 [749 kB] Get:41 http://deb.debian.org/debian trixie/main arm64 libgnutls30t64 arm64 3.8.9-3+deb13u2 [1,378 kB] Get:42 http://deb.debian.org/debian trixie/main arm64 exfatprogs arm64 1.2.9-1+deb13u1 [68.1 kB] Get:43 http://deb.debian.org/debian trixie/main arm64 gpgv arm64 2.4.7-21+deb13u1+b2 [221 kB] Get:44 http://deb.debian.org/debian trixie/main arm64 libcap2-bin arm64 1:2.75-10+b8 [35.5 kB] Get:45 http://deb.debian.org/debian trixie/main arm64 libglib2.0-0t64 arm64 2.84.4-3~deb13u2 [1,428 kB] Get:46 http://deb.debian.org/debian trixie/main arm64 libglib2.0-data all 2.84.4-3~deb13u2 [1,286 kB] Get:47 http://deb.debian.org/debian trixie/main arm64 libnss3 arm64 2:3.110-1+deb13u1 [1,292 kB] Get:48 http://deb.debian.org/debian-security trixie-security/main arm64 libpng16-16t64 arm64 1.6.48-1+deb13u4 [275 kB] Get:49 http://deb.debian.org/debian trixie/main arm64 libss2 arm64 1.47.2-3+b10 [29.4 kB] Get:50 http://deb.debian.org/debian trixie/main arm64 libtalloc2 arm64 2:2.4.3+samba4.22.8+dfsg-0+deb13u1 [60.9 kB] Get:51 http://deb.debian.org/debian-security trixie-security/main arm64 libtiff6 arm64 4.7.0-3+deb13u2 [325 kB] Get:52 http://deb.debian.org/debian trixie/main arm64 libwbclient0 arm64 2:4.22.8+dfsg-0+deb13u1 [69.6 kB] Get:53 http://deb.debian.org/debian trixie/main arm64 linux-base all 4.12.1 [25.5 kB] Get:54 http://deb.debian.org/debian-security trixie-security/main arm64 openssl arm64 3.5.5-1~deb13u2 [1,464 kB] Get:55 http://deb.debian.org/debian trixie/main arm64 python3-cryptography arm64 43.0.0-3+deb13u1 [834 kB] Get:56 http://deb.debian.org/debian trixie/main arm64 python3-urllib3 all 2.3.0-3+deb13u1 [115 kB] Get:57 http://deb.debian.org/debian trixie/main arm64 python3-requests all 2.32.3+dfsg-5+deb13u1 [72.2 kB] Get:58 http://deb.debian.org/debian trixie/main arm64 sq arm64 1.3.1-2+b2 [4,979 kB] Get:59 http://deb.debian.org/debian-security trixie-security/main arm64 ssh all 1:10.0p1-7+deb13u2 [143 kB] Get:60 http://deb.debian.org/debian trixie/main arm64 wireless-regdb all 2026.02.04-1~deb13u1 [12.2 kB] Get:61 http://archive.raspberrypi.com/debian trixie/main arm64 firmware-brcm80211 all 1:20250410-2+rpt1 [13.0 MB] Get:62 http://archive.raspberrypi.com/debian trixie/main arm64 firmware-libertas all 1:20250410-2+rpt1 [8,069 kB] Get:63 http://archive.raspberrypi.com/debian trixie/main arm64 firmware-mediatek all 1:20250410-2+rpt1 [24.6 MB] Get:64 http://archive.raspberrypi.com/debian trixie/main arm64 firmware-realtek all 1:20250410-2+rpt1 [9,926 kB] Get:65 http://archive.raspberrypi.com/debian trixie/main arm64 libdrm-common all 2.4.131-1~bpo13+1+rpt2 [10.7 kB] Get:66 http://archive.raspberrypi.com/debian trixie/main arm64 libdrm2 arm64 2.4.131-1~bpo13+1+rpt2 [48.2 kB] Get:67 http://archive.raspberrypi.com/debian trixie/main arm64 libdtovl0 arm64 20260304+1-1 [28.9 kB] Get:68 http://archive.raspberrypi.com/debian trixie/main arm64 libgpiolib0 arm64 20260304+1-1 [40.0 kB] Get:69 http://archive.raspberrypi.com/debian trixie/main arm64 libpisp1 arm64 1.4.0-1 [310 kB] Get:70 http://archive.raspberrypi.com/debian trixie/main arm64 libpisp-common all 1.4.0-1 [8,954 B] Get:71 http://archive.raspberrypi.com/debian trixie/main arm64 linux-headers-6.12.75+rpt-common-rpi all 1:6.12.75-1+rpt1 [8,804 kB] Get:72 http://archive.raspberrypi.com/debian trixie/main arm64 linux-image-6.12.75+rpt-rpi-2712 arm64 1:6.12.75-1+rpt1 [32.7 MB] Get:73 http://archive.raspberrypi.com/debian trixie/main arm64 linux-kbuild-6.12.75+rpt arm64 1:6.12.75-1+rpt1 [1,381 kB] Get:74 http://archive.raspberrypi.com/debian trixie/main arm64 linux-headers-6.12.75+rpt-rpi-2712 arm64 1:6.12.75-1+rpt1 [1,385 kB] Get:75 http://archive.raspberrypi.com/debian trixie/main arm64 linux-image-6.12.75+rpt-rpi-v8 arm64 1:6.12.75-1+rpt1 [32.7 MB] Get:76 http://archive.raspberrypi.com/debian trixie/main arm64 linux-headers-6.12.75+rpt-rpi-v8 arm64 1:6.12.75-1+rpt1 [1,386 kB] Get:77 http://archive.raspberrypi.com/debian trixie/main arm64 linux-headers-rpi-2712 arm64 1:6.12.75-1+rpt1 [1,160 B] Get:78 http://archive.raspberrypi.com/debian trixie/main arm64 linux-headers-rpi-v8 arm64 1:6.12.75-1+rpt1 [1,156 B] Get:79 http://archive.raspberrypi.com/debian trixie/main arm64 linux-image-rpi-2712 arm64 1:6.12.75-1+rpt1 [1,436 B] Get:80 http://archive.raspberrypi.com/debian trixie/main arm64 linux-image-rpi-v8 arm64 1:6.12.75-1+rpt1 [1,432 B] Get:81 http://archive.raspberrypi.com/debian trixie/main arm64 python3-pip-whl all 25.1.1+dfsg-1+rpt1 [1,505 kB] Get:82 http://archive.raspberrypi.com/debian trixie/main arm64 raspi-config-core all 20260303 [35.7 kB] Get:83 http://archive.raspberrypi.com/debian trixie/main arm64 raspi-utils-core arm64 20260304+1-1 [40.5 kB] Get:84 http://archive.raspberrypi.com/debian trixie/main arm64 raspi-config all 20260303 [12.4 kB] Get:85 http://archive.raspberrypi.com/debian trixie/main arm64 raspberrypi-sys-mods arm64 1:20260315 [19.9 kB] Get:86 http://archive.raspberrypi.com/debian trixie/main arm64 rpi-eeprom all 28.14-1 [2,031 kB] Get:87 http://archive.raspberrypi.com/debian trixie/main arm64 raspinfo all 20260304+1-1 [9,180 B] Get:88 http://archive.raspberrypi.com/debian trixie/main arm64 raspi-utils-otp all 20260304+1-1 [9,376 B] Get:89 http://archive.raspberrypi.com/debian trixie/main arm64 raspi-utils-eeprom arm64 20260304+1-1 [26.7 kB] Get:90 http://archive.raspberrypi.com/debian trixie/main arm64 raspi-utils-dt arm64 20260304+1-1 [53.8 kB] Get:91 http://archive.raspberrypi.com/debian trixie/main arm64 raspi-utils all 20260304+1-1 [6,886 B] Get:92 http://archive.raspberrypi.com/debian trixie/main arm64 rpi-cloud-init-mods all 1:20260119 [3,504 B] Get:93 http://archive.raspberrypi.com/debian trixie/main arm64 rpi-connect-lite arm64 2.10.0 [8,379 kB] Get:94 http://archive.raspberrypi.com/debian trixie/main arm64 rpicam-apps-lite all 1.11.1-1 [4,460 B] Get:95 http://archive.raspberrypi.com/debian trixie/main arm64 userconf-pi all 0.17 [7,754 B] Fetched 241 MB in 21s (11.3 MB/s) Reading changelogs... Done Extracting templates from packages: 100% Preconfiguring packages ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../libc6-dev_2.41-12+rpt1+deb13u2_arm64.deb ... Unpacking libc6-dev:arm64 (2.41-12+rpt1+deb13u2) over (2.41-12+rpt1) ... Preparing to unpack .../libc-dev-bin_2.41-12+rpt1+deb13u2_arm64.deb ... Unpacking libc-dev-bin (2.41-12+rpt1+deb13u2) over (2.41-12+rpt1) ... Preparing to unpack .../linux-libc-dev_1%3a6.12.75-1+rpt1_all.deb ... Unpacking linux-libc-dev (1:6.12.75-1+rpt1) over (1:6.12.47-1+rpt1) ... Preparing to unpack .../libc6_2.41-12+rpt1+deb13u2_arm64.deb ... Unpacking libc6:arm64 (2.41-12+rpt1+deb13u2) over (2.41-12+rpt1) ... Setting up libc6:arm64 (2.41-12+rpt1+deb13u2) ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../base-files_13.8+deb13u4_arm64.deb ... Unpacking base-files (13.8+deb13u4) over (13.8+deb13u2) ... Setting up base-files (13.8+deb13u4) ... Installing new version of config file /etc/debian_version ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../bash_5.2.37-2+b8_arm64.deb ... Unpacking bash (5.2.37-2+b8) over (5.2.37-2+b5) ... Setting up bash (5.2.37-2+b8) ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../dpkg_1.22.22_arm64.deb ... Unpacking dpkg (1.22.22) over (1.22.21) ... Setting up dpkg (1.22.22) ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../libc-bin_2.41-12+rpt1+deb13u2_arm64.deb ... Unpacking libc-bin (2.41-12+rpt1+deb13u2) over (2.41-12+rpt1) ... Setting up libc-bin (2.41-12+rpt1+deb13u2) ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../logsave_1.47.2-3+b10_arm64.deb ... Unpacking logsave (1.47.2-3+b10) over (1.47.2-3+b3) ... Preparing to unpack .../libext2fs2t64_1.47.2-3+b10_arm64.deb ... Leaving 'diversion of /lib/aarch64-linux-gnu/libe2p.so.2 to /lib/aarch64-linux-gnu/libe2p.so.2.usr-is-merged by libext2fs2t64' Leaving 'diversion of /lib/aarch64-linux-gnu/libe2p.so.2.3 to /lib/aarch64-linux-gnu/libe2p.so.2.3.usr-is-merged by libext2fs2t64' Leaving 'diversion of /lib/aarch64-linux-gnu/libext2fs.so.2 to /lib/aarch64-linux-gnu/libext2fs.so.2.usr-is-merged by libext2fs2t64' Leaving 'diversion of /lib/aarch64-linux-gnu/libext2fs.so.2.4 to /lib/aarch64-linux-gnu/libext2fs.so.2.4.usr-is-merged by libext2fs2t64' Unpacking libext2fs2t64:arm64 (1.47.2-3+b10) over (1.47.2-3+b3) ... Setting up libext2fs2t64:arm64 (1.47.2-3+b10) ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../e2fsprogs_1.47.2-3+b10_arm64.deb ... Unpacking e2fsprogs (1.47.2-3+b10) over (1.47.2-3+b3) ... Preparing to unpack .../openssl-provider-legacy_3.5.5-1~deb13u2_arm64.deb ... Unpacking openssl-provider-legacy (3.5.5-1~deb13u2) over (3.5.4-1~deb13u1+rpt1) ... Setting up openssl-provider-legacy (3.5.5-1~deb13u2) ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../libssl3t64_3.5.5-1~deb13u2_arm64.deb ... Unpacking libssl3t64:arm64 (3.5.5-1~deb13u2) over (3.5.4-1~deb13u1+rpt1) ... Setting up libssl3t64:arm64 (3.5.5-1~deb13u2) ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../0-openssh-sftp-server_1%3a10.0p1-7+deb13u2_arm64.deb ... Unpacking openssh-sftp-server (1:10.0p1-7+deb13u2) over (1:10.0p1-7) ... Preparing to unpack .../1-openssh-server_1%3a10.0p1-7+deb13u2_arm64.deb ... Unpacking openssh-server (1:10.0p1-7+deb13u2) over (1:10.0p1-7) ... Preparing to unpack .../2-openssh-client_1%3a10.0p1-7+deb13u2_arm64.deb ... Unpacking openssh-client (1:10.0p1-7+deb13u2) over (1:10.0p1-7) ... Preparing to unpack .../3-libcom-err2_1.47.2-3+b10_arm64.deb ... Unpacking libcom-err2:arm64 (1.47.2-3+b10) over (1.47.2-3+b3) ... Preparing to unpack .../4-rsync_3.4.1+ds1-5+deb13u1_arm64.deb ... Unpacking rsync (3.4.1+ds1-5+deb13u1) over (3.4.1+ds1-5) ... Preparing to unpack .../5-sudo_1.9.16p2-3+deb13u1_arm64.deb ... Unpacking sudo (1.9.16p2-3+deb13u1) over (1.9.16p2-3) ... Preparing to unpack .../6-libcap2_1%3a2.75-10+b8_arm64.deb ... Unpacking libcap2:arm64 (1:2.75-10+b8) over (1:2.75-10+b1) ... Setting up libcap2:arm64 (1:2.75-10+b8) ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../libsqlite3-0_3.46.1-7+deb13u1_arm64.deb ... Unpacking libsqlite3-0:arm64 (3.46.1-7+deb13u1) over (3.46.1-7) ... Setting up libsqlite3-0:arm64 (3.46.1-7+deb13u1) ... (Reading database ... 65992 files and directories currently installed.) Preparing to unpack .../dpkg-dev_1.22.22_all.deb ... Unpacking dpkg-dev (1.22.22) over (1.22.21) ... Preparing to unpack .../libdpkg-perl_1.22.22_all.deb ... Unpacking libdpkg-perl (1.22.22) over (1.22.21) ... Preparing to unpack .../sqv_1.3.0-3+b2_arm64.deb ... Unpacking sqv (1.3.0-3+b2) over (1.3.0-3) ... Setting up sqv (1.3.0-3+b2) ... (Reading database ... 65993 files and directories currently installed.) Preparing to unpack .../00-tzdata_2026a-0+deb13u1_all.deb ... Unpacking tzdata (2026a-0+deb13u1) over (2025b-4+deb13u1) ... Preparing to unpack .../01-dhcpcd-base_1%3a10.1.0-11+deb13u2_arm64.deb ... Unpacking dhcpcd-base (1:10.1.0-11+deb13u2) over (1:10.1.0-11+deb13u1) ... Preparing to unpack .../02-linux-sysctl-defaults_4.12.1_all.deb ... Unpacking linux-sysctl-defaults (4.12.1) over (4.12) ... Preparing to unpack .../03-libc-l10n_2.41-12+rpt1+deb13u2_all.deb ... Unpacking libc-l10n (2.41-12+rpt1+deb13u2) over (2.41-12+rpt1) ... Preparing to unpack .../04-locales_2.41-12+rpt1+deb13u2_all.deb ... Unpacking locales (2.41-12+rpt1+deb13u2) over (2.41-12+rpt1) ... Preparing to unpack .../05-busybox_1%3a1.37.0-6+b7_arm64.deb ... Unpacking busybox (1:1.37.0-6+b7) over (1:1.37.0-6+b3) ... Preparing to unpack .../06-gpgsm_2.4.7-21+deb13u1+b2_arm64.deb ... Unpacking gpgsm (2.4.7-21+deb13u1+b2) over (2.4.7-21+b3) ... Preparing to unpack .../07-gnupg-utils_2.4.7-21+deb13u1+b2_arm64.deb ... Unpacking gnupg-utils (2.4.7-21+deb13u1+b2) over (2.4.7-21+b3) ... Preparing to unpack .../08-gpg-wks-client_2.4.7-21+deb13u1+b2_arm64.deb ... Unpacking gpg-wks-client (2.4.7-21+deb13u1+b2) over (2.4.7-21+b3) ... Preparing to unpack .../09-gpg_2.4.7-21+deb13u1+b2_arm64.deb ... Unpacking gpg (2.4.7-21+deb13u1+b2) over (2.4.7-21+b3) ... Preparing to unpack .../10-dirmngr_2.4.7-21+deb13u1+b2_arm64.deb ... Unpacking dirmngr (2.4.7-21+deb13u1+b2) over (2.4.7-21+b3) ... Preparing to unpack .../11-gnupg_2.4.7-21+deb13u1_all.deb ... Unpacking gnupg (2.4.7-21+deb13u1) over (2.4.7-21) ... Preparing to unpack .../12-gpgconf_2.4.7-21+deb13u1+b2_arm64.deb ... Unpacking gpgconf (2.4.7-21+deb13u1+b2) over (2.4.7-21+b3) ... Preparing to unpack .../13-gpg-agent_2.4.7-21+deb13u1+b2_arm64.deb ... Unpacking gpg-agent (2.4.7-21+deb13u1+b2) over (2.4.7-21+b3) ... Preparing to unpack .../14-gnupg-l10n_2.4.7-21+deb13u1_all.deb ... Unpacking gnupg-l10n (2.4.7-21+deb13u1) over (2.4.7-21) ... Preparing to unpack .../15-libgnutls30t64_3.8.9-3+deb13u2_arm64.deb ... Unpacking libgnutls30t64:arm64 (3.8.9-3+deb13u2) over (3.8.9-3) ... Preparing to unpack .../16-exfatprogs_1.2.9-1+deb13u1_arm64.deb ... Unpacking exfatprogs (1.2.9-1+deb13u1) over (1.2.9-1) ... Preparing to unpack .../17-firmware-atheros_1%3a20250410-2+rpt1_all.deb ... Unpacking firmware-atheros (1:20250410-2+rpt1) over (1:20241210-1+rpt4) ... Preparing to unpack .../18-firmware-brcm80211_1%3a20250410-2+rpt1_all.deb ... Unpacking firmware-brcm80211 (1:20250410-2+rpt1) over (1:20241210-1+rpt4) ... Preparing to unpack .../19-firmware-libertas_1%3a20250410-2+rpt1_all.deb ... Unpacking firmware-libertas (1:20250410-2+rpt1) over (1:20241210-1+rpt4) ... Preparing to unpack .../20-firmware-mediatek_1%3a20250410-2+rpt1_all.deb ... Unpacking firmware-mediatek (1:20250410-2+rpt1) over (1:20241210-1+rpt4) ... Preparing to unpack .../21-firmware-realtek_1%3a20250410-2+rpt1_all.deb ... Unpacking firmware-realtek (1:20250410-2+rpt1) over (1:20241210-1+rpt4) ... Preparing to unpack .../22-gpgv_2.4.7-21+deb13u1+b2_arm64.deb ... Unpacking gpgv (2.4.7-21+deb13u1+b2) over (2.4.7-21+b3) ... Preparing to unpack .../23-libcap2-bin_1%3a2.75-10+b8_arm64.deb ... Unpacking libcap2-bin (1:2.75-10+b8) over (1:2.75-10+b1) ... Preparing to unpack .../24-libdrm-common_2.4.131-1~bpo13+1+rpt2_all.deb ... Unpacking libdrm-common (2.4.131-1~bpo13+1+rpt2) over (2.4.124-2) ... Preparing to unpack .../25-libdrm2_2.4.131-1~bpo13+1+rpt2_arm64.deb ... Unpacking libdrm2:arm64 (2.4.131-1~bpo13+1+rpt2) over (2.4.124-2) ... Preparing to unpack .../26-libdtovl0_20260304+1-1_arm64.deb ... Unpacking libdtovl0:arm64 (20260304+1-1) over (20251120-1) ... Preparing to unpack .../27-libglib2.0-0t64_2.84.4-3~deb13u2_arm64.deb ... Unpacking libglib2.0-0t64:arm64 (2.84.4-3~deb13u2) over (2.84.4-3~deb13u1) ... Preparing to unpack .../28-libglib2.0-data_2.84.4-3~deb13u2_all.deb ... Unpacking libglib2.0-data (2.84.4-3~deb13u2) over (2.84.4-3~deb13u1) ... Preparing to unpack .../29-libgpiolib0_20260304+1-1_arm64.deb ... Unpacking libgpiolib0:arm64 (20260304+1-1) over (20251120-1) ... Preparing to unpack .../30-libnss3_2%3a3.110-1+deb13u1_arm64.deb ... Unpacking libnss3:arm64 (2:3.110-1+deb13u1) over (2:3.110-1) ... Preparing to unpack .../31-libpisp1_1.4.0-1_arm64.deb ... Unpacking libpisp1:arm64 (1.4.0-1) over (1.3.0-1) ... Preparing to unpack .../32-libpisp-common_1.4.0-1_all.deb ... Unpacking libpisp-common (1.4.0-1) over (1.3.0-1) ... Preparing to unpack .../33-libpng16-16t64_1.6.48-1+deb13u4_arm64.deb ... Unpacking libpng16-16t64:arm64 (1.6.48-1+deb13u4) over (1.6.48-1) ... Preparing to unpack .../34-libss2_1.47.2-3+b10_arm64.deb ... Unpacking libss2:arm64 (1.47.2-3+b10) over (1.47.2-3+b3) ... Preparing to unpack .../35-libtalloc2_2%3a2.4.3+samba4.22.8+dfsg-0+deb13u1_arm64.deb ... Unpacking libtalloc2:arm64 (2:2.4.3+samba4.22.8+dfsg-0+deb13u1) over (2:2.4.3+samba4.22.6+dfsg-0+deb13u1) ... Preparing to unpack .../36-libtiff6_4.7.0-3+deb13u2_arm64.deb ... Unpacking libtiff6:arm64 (4.7.0-3+deb13u2) over (4.7.0-3+deb13u1) ... Preparing to unpack .../37-libwbclient0_2%3a4.22.8+dfsg-0+deb13u1_arm64.deb ... Unpacking libwbclient0:arm64 (2:4.22.8+dfsg-0+deb13u1) over (2:4.22.6+dfsg-0+deb13u1) ... Preparing to unpack .../38-linux-base_4.12.1_all.deb ... Unpacking linux-base (4.12.1) over (4.12) ... Selecting previously unselected package linux-headers-6.12.75+rpt-common-rpi. Preparing to unpack .../39-linux-headers-6.12.75+rpt-common-rpi_1%3a6.12.75-1+rpt1_all.deb ... Unpacking linux-headers-6.12.75+rpt-common-rpi (1:6.12.75-1+rpt1) ... Selecting previously unselected package linux-image-6.12.75+rpt-rpi-2712. Preparing to unpack .../40-linux-image-6.12.75+rpt-rpi-2712_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-image-6.12.75+rpt-rpi-2712 (1:6.12.75-1+rpt1) ... Selecting previously unselected package linux-kbuild-6.12.75+rpt. Preparing to unpack .../41-linux-kbuild-6.12.75+rpt_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-kbuild-6.12.75+rpt (1:6.12.75-1+rpt1) ... Selecting previously unselected package linux-headers-6.12.75+rpt-rpi-2712. Preparing to unpack .../42-linux-headers-6.12.75+rpt-rpi-2712_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-headers-6.12.75+rpt-rpi-2712 (1:6.12.75-1+rpt1) ... Selecting previously unselected package linux-image-6.12.75+rpt-rpi-v8. Preparing to unpack .../43-linux-image-6.12.75+rpt-rpi-v8_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-image-6.12.75+rpt-rpi-v8 (1:6.12.75-1+rpt1) ... Selecting previously unselected package linux-headers-6.12.75+rpt-rpi-v8. Preparing to unpack .../44-linux-headers-6.12.75+rpt-rpi-v8_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-headers-6.12.75+rpt-rpi-v8 (1:6.12.75-1+rpt1) ... Preparing to unpack .../45-linux-headers-rpi-2712_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-headers-rpi-2712 (1:6.12.75-1+rpt1) over (1:6.12.47-1+rpt1) ... Preparing to unpack .../46-linux-headers-rpi-v8_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-headers-rpi-v8 (1:6.12.75-1+rpt1) over (1:6.12.47-1+rpt1) ... Preparing to unpack .../47-linux-image-rpi-2712_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-image-rpi-2712 (1:6.12.75-1+rpt1) over (1:6.12.47-1+rpt1) ... Preparing to unpack .../48-linux-image-rpi-v8_1%3a6.12.75-1+rpt1_arm64.deb ... Unpacking linux-image-rpi-v8 (1:6.12.75-1+rpt1) over (1:6.12.47-1+rpt1) ... Preparing to unpack .../49-openssl_3.5.5-1~deb13u2_arm64.deb ... Unpacking openssl (3.5.5-1~deb13u2) over (3.5.4-1~deb13u1+rpt1) ... Preparing to unpack .../50-python3-cryptography_43.0.0-3+deb13u1_arm64.deb ... Unpacking python3-cryptography (43.0.0-3+deb13u1) over (43.0.0-3) ... Preparing to unpack .../51-python3-pip-whl_25.1.1+dfsg-1+rpt1_all.deb ... Unpacking python3-pip-whl (25.1.1+dfsg-1+rpt1) over (25.1.1+dfsg-1) ... Preparing to unpack .../52-python3-urllib3_2.3.0-3+deb13u1_all.deb ... Unpacking python3-urllib3 (2.3.0-3+deb13u1) over (2.3.0-3) ... Preparing to unpack .../53-python3-requests_2.32.3+dfsg-5+deb13u1_all.deb ... Unpacking python3-requests (2.32.3+dfsg-5+deb13u1) over (2.32.3+dfsg-5) ... Preparing to unpack .../54-raspi-config-core_20260303_all.deb ... Unpacking raspi-config-core (20260303) over (20251202) ... Preparing to unpack .../55-raspi-utils-core_20260304+1-1_arm64.deb ... Unpacking raspi-utils-core (20260304+1-1) over (20251120-1) ... Preparing to unpack .../56-raspi-config_20260303_all.deb ... Unpacking raspi-config (20260303) over (20251202) ... Preparing to unpack .../57-raspberrypi-sys-mods_1%3a20260315_arm64.deb ... Unpacking raspberrypi-sys-mods (1:20260315) over (1:20251028+1) ... Preparing to unpack .../58-rpi-eeprom_28.14-1_all.deb ... Unpacking rpi-eeprom (28.14-1) over (28.9-1) ... Preparing to unpack .../59-raspinfo_20260304+1-1_all.deb ... Unpacking raspinfo (20260304+1-1) over (20251120-1) ... Preparing to unpack .../60-raspi-utils-otp_20260304+1-1_all.deb ... Unpacking raspi-utils-otp (20260304+1-1) over (20251120-1) ... Preparing to unpack .../61-raspi-utils-eeprom_20260304+1-1_arm64.deb ... Unpacking raspi-utils-eeprom (20260304+1-1) over (20251120-1) ... Preparing to unpack .../62-raspi-utils-dt_20260304+1-1_arm64.deb ... Unpacking raspi-utils-dt (20260304+1-1) over (20251120-1) ... Preparing to unpack .../63-raspi-utils_20260304+1-1_all.deb ... Unpacking raspi-utils (20260304+1-1) over (20251120-1) ... Preparing to unpack .../64-rpi-cloud-init-mods_1%3a20260119_all.deb ... Unpacking rpi-cloud-init-mods (1:20260119) over (1:20251114) ... Preparing to unpack .../65-rpi-connect-lite_2.10.0_arm64.deb ... Unpacking rpi-connect-lite (2.10.0) over (2.6.1) ... Preparing to unpack .../66-rpicam-apps-lite_1.11.1-1_all.deb ... Unpacking rpicam-apps-lite (1.11.1-1) over (1.10.1-1) ... Preparing to unpack .../67-sq_1.3.1-2+b2_arm64.deb ... Unpacking sq (1.3.1-2+b2) over (1.3.1-2+b1) ... Preparing to unpack .../68-ssh_1%3a10.0p1-7+deb13u2_all.deb ... Unpacking ssh (1:10.0p1-7+deb13u2) over (1:10.0p1-7) ... Preparing to unpack .../69-userconf-pi_0.17_all.deb ... Unpacking userconf-pi (0.17) over (0.15) ... Preparing to unpack .../70-wireless-regdb_2026.02.04-1~deb13u1_all.deb ... Unpacking wireless-regdb (2026.02.04-1~deb13u1) over (2025.07.10-1) ... Setting up libgnutls30t64:arm64 (3.8.9-3+deb13u2) ... Setting up raspi-config-core (20260303) ... Setting up libc-l10n (2.41-12+rpt1+deb13u2) ... Setting up raspi-utils-eeprom (20260304+1-1) ... Setting up raspi-utils-otp (20260304+1-1) ... Setting up linux-base (4.12.1) ... Setting up exfatprogs (1.2.9-1+deb13u1) ... Setting up libdtovl0:arm64 (20260304+1-1) ... Setting up python3-pip-whl (25.1.1+dfsg-1+rpt1) ... Setting up openssh-client (1:10.0p1-7+deb13u2) ... Setting up wireless-regdb (2026.02.04-1~deb13u1) ... Setting up raspi-utils-dt (20260304+1-1) ... Setting up firmware-atheros (1:20250410-2+rpt1) ... Setting up linux-libc-dev (1:6.12.75-1+rpt1) ... Setting up libnss3:arm64 (2:3.110-1+deb13u1) ... Setting up libcom-err2:arm64 (1.47.2-3+b10) ... Setting up sq (1.3.1-2+b2) ... Setting up linux-image-6.12.75+rpt-rpi-2712 (1:6.12.75-1+rpt1) ... /etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-6.12.75+rpt-rpi-2712 '/boot/initrd.img-6.12.75+rpt-rpi-2712' -> '/boot/firmware/initramfs_2712' /etc/kernel/postinst.d/z50-raspi-firmware: '/boot/vmlinuz-6.12.75+rpt-rpi-2712' -> '/boot/firmware/kernel_2712.img' Setting up locales (2.41-12+rpt1+deb13u2) ... Generating locales (this might take a while)... en_GB.UTF-8... done Generation complete. Setting up linux-image-6.12.75+rpt-rpi-v8 (1:6.12.75-1+rpt1) ... /etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-6.12.75+rpt-rpi-v8 '/boot/initrd.img-6.12.75+rpt-rpi-v8' -> '/boot/firmware/initramfs8' /etc/kernel/postinst.d/z50-raspi-firmware: '/boot/vmlinuz-6.12.75+rpt-rpi-v8' -> '/boot/firmware/kernel8.img' Setting up libwbclient0:arm64 (2:4.22.8+dfsg-0+deb13u1) ... Setting up tzdata (2026a-0+deb13u1) ... Current default time zone: 'Europe/Vienna' Local time is now: Fri Apr 10 15:35:21 CEST 2026. Universal Time is now: Fri Apr 10 13:35:21 UTC 2026. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libcap2-bin (1:2.75-10+b8) ... Setting up linux-image-rpi-2712 (1:6.12.75-1+rpt1) ... Setting up libtalloc2:arm64 (2:2.4.3+samba4.22.8+dfsg-0+deb13u1) ... Setting up busybox (1:1.37.0-6+b7) ... Setting up libglib2.0-0t64:arm64 (2.84.4-3~deb13u2) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.84.4-3~deb13u2) ... Setting up linux-sysctl-defaults (4.12.1) ... Setting up rpicam-apps-lite (1.11.1-1) ... Setting up firmware-brcm80211 (1:20250410-2+rpt1) ... Setting up gnupg-l10n (2.4.7-21+deb13u1) ... Setting up firmware-mediatek (1:20250410-2+rpt1) ... Setting up firmware-realtek (1:20250410-2+rpt1) ... Setting up python3-cryptography (43.0.0-3+deb13u1) ... Setting up linux-headers-6.12.75+rpt-common-rpi (1:6.12.75-1+rpt1) ... Setting up rpi-connect-lite (2.10.0) ... For Raspberry Pi OS Lite, enable user lingering for your user: loginctl enable-linger This allows users who are not logged in to run long-running services. For information on getting started with Raspberry Pi Connect, please see the official documentation: https://rpltd.co/rpi-connect Setting up libpisp-common (1.4.0-1) ... Setting up libpng16-16t64:arm64 (1.6.48-1+deb13u4) ... Setting up libgpiolib0:arm64 (20260304+1-1) ... Setting up libss2:arm64 (1.47.2-3+b10) ... Setting up sudo (1.9.16p2-3+deb13u1) ... Setting up dhcpcd-base (1:10.1.0-11+deb13u2) ... Installing new version of config file /etc/dhcpcd.conf ... Setting up linux-image-rpi-v8 (1:6.12.75-1+rpt1) ... Setting up linux-kbuild-6.12.75+rpt (1:6.12.75-1+rpt1) ... Setting up libdpkg-perl (1.22.22) ... Setting up logsave (1.47.2-3+b10) ... Setting up python3-urllib3 (2.3.0-3+deb13u1) ... Setting up firmware-libertas (1:20250410-2+rpt1) ... Setting up gpgv (2.4.7-21+deb13u1+b2) ... Setting up libtiff6:arm64 (4.7.0-3+deb13u2) ... Setting up gpgconf (2.4.7-21+deb13u1+b2) ... Setting up libpisp1:arm64 (1.4.0-1) ... Setting up linux-headers-6.12.75+rpt-rpi-v8 (1:6.12.75-1+rpt1) ... Setting up libc-dev-bin (2.41-12+rpt1+deb13u2) ... Setting up openssl (3.5.5-1~deb13u2) ... Setting up libdrm-common (2.4.131-1~bpo13+1+rpt2) ... Setting up gpg (2.4.7-21+deb13u1+b2) ... Setting up linux-headers-6.12.75+rpt-rpi-2712 (1:6.12.75-1+rpt1) ... Setting up rpi-cloud-init-mods (1:20260119) ... Setting up rsync (3.4.1+ds1-5+deb13u1) ... rsync.service is a disabled or a static unit not running, not starting it. Setting up raspi-utils-core (20260304+1-1) ... Setting up gnupg-utils (2.4.7-21+deb13u1+b2) ... Setting up linux-headers-rpi-v8 (1:6.12.75-1+rpt1) ... Setting up openssh-sftp-server (1:10.0p1-7+deb13u2) ... Setting up gpg-agent (2.4.7-21+deb13u1+b2) ... Setting up openssh-server (1:10.0p1-7+deb13u2) ... ssh.socket is a disabled or a static unit not running, not starting it. Setting up gpgsm (2.4.7-21+deb13u1+b2) ... Setting up e2fsprogs (1.47.2-3+b10) ... update-initramfs: deferring update (trigger activated) Setting up dpkg-dev (1.22.22) ... Setting up dirmngr (2.4.7-21+deb13u1+b2) ... Setting up python3-requests (2.32.3+dfsg-5+deb13u1) ... Setting up linux-headers-rpi-2712 (1:6.12.75-1+rpt1) ... Setting up libdrm2:arm64 (2.4.131-1~bpo13+1+rpt2) ... Setting up gnupg (2.4.7-21+deb13u1) ... Setting up libc6-dev:arm64 (2.41-12+rpt1+deb13u2) ... Setting up raspi-config (20260303) ... Setting up ssh (1:10.0p1-7+deb13u2) ... Setting up gpg-wks-client (2.4.7-21+deb13u1+b2) ... Setting up raspberrypi-sys-mods (1:20260315) ... Relinquishing package ownership of 010_pi-nopasswd... renamed '/etc/sudoers.d/010_pi-nopasswd.dpkg-backup' -> '/etc/sudoers.d/010_pi-nopasswd' Setting up userconf-pi (0.17) ... Setting up raspi-utils (20260304+1-1) ... Setting up rpi-eeprom (28.14-1) ... Setting up raspinfo (20260304+1-1) ... Processing triggers for libc-bin (2.41-12+rpt1+deb13u2) ... Processing triggers for systemd (257.9-1~deb13u1) ... Processing triggers for man-db (2.13.1-1) ... Processing triggers for procps (2:4.0.4-9) ... Processing triggers for debianutils (5.23.2) ... Processing triggers for initramfs-tools (0.148.3+rpt2) ... update-initramfs: Generating /boot/initrd.img-6.12.75+rpt-rpi-v8 '/boot/initrd.img-6.12.75+rpt-rpi-v8' -> '/boot/firmware/initramfs8' update-initramfs: Generating /boot/initrd.img-6.12.75+rpt-rpi-2712 '/boot/initrd.img-6.12.75+rpt-rpi-2712' -> '/boot/firmware/initramfs_2712' piadmin@Pi5:~ $Das upgrade sieht für mich soweit OK aus.
Aber das sch... update motzt noch immer:
piadmin@Pi5:~ $ sudo apt update Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Get:3 http://deb.debian.org/debian-security trixie-security InRelease [43.4 kB] Err:2 http://deb.debian.org/debian trixie-updates InRelease Splitting up /var/lib/apt/lists/deb.debian.org_debian_dists_trixie-updates_InRelease into data and signature failed Ign:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 http://archive.raspberrypi.com/debian trixie Release Error: Splitting of clearsigned file /var/lib/apt/lists/deb.debian.org_debian_dists_trixie_InRelease failed as it doesn't contain all expected parts Error: The repository 'http://deb.debian.org/debian trixie InRelease' provides only weak security information. Notice: Updating from such a repository can't be done securely, and is therefore disabled by default. Notice: See apt-secure(8) manpage for repository creation and user configuration details. Warning: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: http://deb.debian.org/debian trixie-updates InRelease: Splitting up /var/lib/apt/lists/deb.debian.org_debian_dists_trixie-updates_InRelease into data and signature failed piadmin@Pi5:~ $Und das naächet apt udpate leifert wieder die ursprünglichen Fehler:
piadmin@Pi5:~ $ sudo apt update Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Get:4 http://archive.raspberrypi.com/debian trixie InRelease [54.9 kB] Err:3 http://deb.debian.org/debian-security trixie-security InRelease Splitting up /var/lib/apt/lists/deb.debian.org_debian-security_dists_trixie-security_InRelease into data and signature failed Ign:5 http://deb.debian.org/debian trixie-updates/non-free-firmware Translation-en Get:5 http://deb.debian.org/debian trixie-updates/non-free-firmware Translation-en [352 B] Err:5 http://deb.debian.org/debian trixie-updates/non-free-firmware Translation-en 404 Not Found [IP: 151.101.130.132 80] File has unexpected size (32 != 352). Mirror sync in progress? [IP: 151.101.130.132 80] Hashes of expected file: - Filesize:352 [weak] - SHA256:9ab2e06dbc0b5c8146230d0057eb2d9622da6916b69c584340cc92c2ff5bb5e1 Release file created at: Thu, 09 Apr 2026 20:31:03 +0000 Fetched 54.9 kB in 0s (196 kB/s) Warning: Conflicting distribution: http://deb.debian.org/debian trixie InRelease (expected trixie but got trixie-security) Warning: Conflicting distribution: http://deb.debian.org/debian trixie-updates InRelease (expected trixie-updates but got trixie-security) Warning: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: http://deb.debian.org/debian-security trixie-security InRelease: Splitting up /var/lib/apt/lists/deb.debian.org_debian-security_dists_trixie-security_InRelease into data and signature failed Warning: Failed to fetch http://deb.debian.org/debian-security/dists/trixie-security/InRelease Splitting up /var/lib/apt/lists/deb.debian.org_debian-security_dists_trixie-security_InRelease into data and signature failed Error: Failed to fetch http://deb.debian.org/debian/dists/trixie-updates/non-free-firmware/i18n/Translation-en.xz File has unexpected size (32 != 352). Mirror sync in progress? [IP: 151.101.130.132 80] Hashes of expected file: - Filesize:352 [weak] - SHA256:9ab2e06dbc0b5c8146230d0057eb2d9622da6916b69c584340cc92c2ff5bb5e1 Release file created at: Thu, 09 Apr 2026 20:31:03 +0000 Warning: Some index files failed to download. They have been ignored, or old ones used instead. piadmin@Pi5:~ $grmmll ....
-
OK - könnte ma das node.js Thema falls noch mehr notwenig ist in einen anderen Topic verlegen :-)Ich versuch zu klären warum die Trixie mich nicht mag :-(
EDIT:
Danke @homoran fürs abtrennen.Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
H Homoran hat dieses Thema am aufgespalten
-
OK - könnte ma das node.js Thema falls noch mehr notwenig ist in einen anderen Topic verlegen :-)Ich versuch zu klären warum die Trixie mich nicht mag :-(
EDIT:
Danke @homoran fürs abtrennen.Ich versuch zu klären warum die Trixie mich nicht mag :-(
Da mag dich der Mirror wohl nicht.
Setz da mal einen der länderspezifischen Links rein. -
Ich versuch zu klären warum die Trixie mich nicht mag :-(
Da mag dich der Mirror wohl nicht.
Setz da mal einen der länderspezifischen Links rein.Kannst du mir helfen wo ich da nen Link anpassen soll?
DANKE und sorry für den Aufwand den ich euch mach. An sich dachte ich bisher ne clean PI Instalalion ist sowas von einfach ...Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer 'nen Kaffee spendieren will: https://paypal.me
-
OK, wenn KI nicht lügt sollte ein Anpassen von 'deb.debian.org' das tun ..
-
Ich versuch zu klären warum die Trixie mich nicht mag :-(
Da mag dich der Mirror wohl nicht.
Setz da mal einen der länderspezifischen Links rein.Kannst du mir helfen wo ich da nen Link anpassen soll?
DANKE und sorry für den Aufwand den ich euch mach. An sich dachte ich bisher ne clean PI Instalalion ist sowas von einfach ...@mcm1957
In den Quelldateien unter /etc/apt/sources.list.d/
Da dann statt
deb.debian.org
halt was aushttps://www.debian.org/mirror/list
eintragen. Also z. B. für Belgien
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
494
Online32.8k
Benutzer82.7k
Themen1.3m
Beiträge