Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[Gonzokalle]

@Thomas-Braun
Den iobroker vorher stoppen?

[Thomas Braun]

@Gonzokalle
Kannste machen, macht der Befehl aber ohnehin selber.

[Gonzokalle]

@Thomas-Braun
Gut
Ist scheinbar ohne Fehler durchgelaufen.

Kann ich jetzt
cd /opt/iobroker/ && npm i iobroker.rpi2@3.0.2 --debug
probieren?

ioBroker nodejs fixer 2025-08-09
You requested to install latest version from nodejs v24 tree.

Your current setup is:
/usr/bin/nodejs         v22.21.0
/usr/bin/node           v22.21.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

We found these nodejs versions available for installation:

nodejs:
  Installed: 22.21.0-1nodesource1
  Candidate: 22.21.0-1nodesource1
  Version table:
 *** 22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages



Nothing to do - Your installation is using the correct paths.

You are running nodejs v22.21.0. Do you want to install latest version from nodejs v.24 tree?

Press <y> to continue or any other key to quit
Trying to fix your installation now. Please be patient.
find: '/run/user/1000/doc': Permission denied
find: '/run/user/1000/gvfs': Permission denied
Stopping ioBroker now
#####
ioBroker has been stopped


Removing dfsg-nodejs




*** These repos are active on your system:
Hit:1 http://archive.raspberrypi.com/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Get:3 http://deb.debian.org/debian trixie-updates InRelease [47.3 kB]
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Fetched 47.3 kB in 0s (332 kB/s)
Reading package lists... Done

*** Installing ca-certificates, curl and gnupg, just in case they are missing.

*** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source

deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_24.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001

*** These repos are active after the adjustments:
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://archive.raspberrypi.com/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Get:5 https://deb.nodesource.com/node_24.x nodistro InRelease [12.1 kB]
Get:6 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages [4879 B]
Get:7 https://deb.nodesource.com/node_24.x nodistro/main armhf Packages [1369 B]
Fetched 18.4 kB in 1s (33.1 kB/s)
Reading package lists... Done
W: https://deb.nodesource.com/node_24.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details

Installing nodejs now!

Installing latest nodejs v24 release
W: https://deb.nodesource.com/node_24.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
(Reading database ... 134042 files and directories currently installed.)
Preparing to unpack .../nodejs_24.12.0-1nodesource1_arm64.deb ...
Detected old npm client, removing...
Unpacking nodejs (24.12.0-1nodesource1) over (22.21.0-1nodesource1) ...
Setting up nodejs (24.12.0-1nodesource1) ...
Processing triggers for man-db (2.13.1-1) ...

SUCCESS!
v24.12.0 has been installed! You are using the latest nodejs@24 release now!

COMPATIBILITY CHECK IN PROGRESS (Only a --dry-run! No modules are really changed or added!)
add usocket 0.3.0
add unix-dgram 2.0.6
add raw-socket 1.8.1
add nan 2.19.0
add number-is-nan 1.0.1
add npmlog 4.1.2
add node-gyp 7.1.2
add rimraf 3.0.2
add minimatch 3.1.2
add glob 7.2.3
add brace-expansion 1.1.12
add net-ping 1.2.4
add napi-thread-safe-callback 0.0.6
add gauge 2.7.4
add strip-ansi 3.0.1
add string-width 1.0.2
add signal-exit 3.0.7
add is-fullwidth-code-point 1.0.0
add ansi-regex 2.1.1
add es6-promise 4.2.8
add env-paths 2.2.1
add diskusage 1.2.0
add cpu-features 0.0.10
add code-point-at 1.1.0
add buildcheck 0.0.7
add authenticate-pam 1.0.5
add are-we-there-yet 1.1.7
add string_decoder 1.1.1
add safe-buffer 5.1.2
add readable-stream 2.3.8
add @stoprocent/noble 1.19.1
remove @csstools/css-tokenizer 3.0.4
remove @csstools/css-parser-algorithms 3.0.5
remove canvas 2.11.2

added 31 packages, and removed 3 packages in 2s

214 packages are looking for funding
  run `npm fund` for details


We tried our best to fix your nodejs. Please run iob diag again to verify.

*** RESTARTING ioBroker NOW! ***
 Please refresh or restart your browser in a few moments.
martin@RaspberryPi-Iobroker:~ $

[Homoran]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Please run iob diag again to verify

[Thomas Braun]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

cd /opt/iobroker/ 
npm i
npm i iobroker.rpi2@3.0.2 --debug
iob status

Irgendein Adapter ist da auf einem alten Stand.
canvas fliegt raus. Schau mit

npm explain canvas

nach warum

[Gonzokalle]

@Homoran
Sieht doch ganz gut aus.

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: RaspberryPi-Iobroker
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 15:20:50 up 22:21,  3 users,  load average: 0.53, 0.59, 0.53
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sun 2025-12-28 15:20:50 CET
           Universal time: Sun 2025-12-28 14:20:50 UTC
                 RTC time: Sun 2025-12-28 14:20:50
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
martin
HOME=/home/martin
GROUPS=martin adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/martin
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         true
Display-Manager:        * lightdm.service - Light Display Manager
Desktop:
Session:                tty

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        3.5G        2.1G         57M        3.0G        4.9G
Swap:           2.1G          0B        2.1G
Total:           10G        3.5G        4.3G

Active iob-Instances:   30

         8063 M total memory
         3358 M used memory
         3263 M active memory
         2224 M inactive memory
         2028 M free memory
          305 M buffer memory
         2511 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 15:20:51 up 22:21,  3 users,  load average: 0.53, 0.59, 0.53
Tasks: 248 total,   1 running, 247 sleeping,   0 stopped,   0 zombie
%Cpu(s): 11.9 us,  2.4 sy,  0.0 ni, 85.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   8063.0 total,   2023.0 free,   3364.2 used,   2817.4 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   4698.9 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     1.6G   15M  1.6G   1% /run
/dev/nvme0n1p2 ext4      917G   11G  869G   2% /
tmpfs          tmpfs     4.0G  368K  4.0G   1% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     4.0G   19M  4.0G   1% /tmp
/dev/nvme0n1p1 vfat      510M   86M  425M  17% /boot/firmware
tmpfs          tmpfs     807M  256K  807M   1% /run/user/1000
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyAMA10.service

Messages concerning ext4 filesystem in dmesg:
[Sat Dec 27 16:58:55 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:82:17:A3 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=e4c2f3ef-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE
[Sat Dec 27 16:58:56 2025] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs
[Sat Dec 27 16:58:56 2025] EXT4-fs (nvme0n1p2): mounted filesystem d6944274-f2f7-4644-96a4-213c3b367f5c ro with ordered data mode. Quota mode: none.
[Sat Dec 27 16:58:57 2025] EXT4-fs (nvme0n1p2): re-mounted d6944274-f2f7-4644-96a4-213c3b367f5c r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/nvme0n1p2 ext4   rw,noatime
`-/boot/firmware /dev/nvme0n1p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
251M    /var/cache
238M    /var/cache/apt
221M    /var/lib
154M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
98M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
988M    /opt/iobroker/iobroker-data/
496M    /opt/iobroker/iobroker-data/history
319M    /opt/iobroker/iobroker-data/files
124M    /opt/iobroker/iobroker-data/backup-objects
67M     /opt/iobroker/iobroker-data/files/echarts.admin

The five largest files in iobroker-data are:
42M     /opt/iobroker/iobroker-data/objects.jsonl
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.70a15e1f.js.map
18M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.5fe9c7da.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-SHK_JeeLink_LaCrosse-if00-port0
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v24.12.0
/usr/bin/node           v24.12.0
/usr/bin/npm            11.6.2
/usr/bin/npx            11.6.2
/usr/bin/corepack       0.34.5

nodejs:
  Installed: 24.12.0-1nodesource1
  Candidate: 24.12.0-1nodesource1
  Version table:
 *** 24.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     24.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.0.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.0.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
RaspberryPi-Iobroker RaspberryPi-Iobroker (version: 7.0.7, hostname: RaspberryPi-Iobroker, alive, uptime: 7712)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     1
+-- iobroker.eusec@2.0.3 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.eusec.git#f625cbb12aea40dcf6faf11a17d93328f069b753)

Adapter State
+ system.adapter.admin.0                  : admin                 : RaspberryPi-Iobroker                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.backitup.0               : backitup              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.device-watcher.0         : device-watcher        : RaspberryPi-Iobroker                     -  enabled
  system.adapter.devices.0                : devices               : RaspberryPi-Iobroker                     - disabled
+ system.adapter.echarts.0                : echarts               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.eusec.0                  : eusec                 : RaspberryPi-Iobroker                     -  enabled
  system.adapter.flot.0                   : flot                  : RaspberryPi-Iobroker                     - disabled
+ system.adapter.fullybrowser.0           : fullybrowser          : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.history.0                : history               : RaspberryPi-Iobroker                     -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : RaspberryPi-Iobroker                     - disabled
+ system.adapter.iot.0                    : iot                   : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.iqontrol.0               : iqontrol              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.iqontrol.1               : iqontrol              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.javascript.0             : javascript            : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.jeelink.0                : jeelink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : RaspberryPi-Iobroker                     -  enabled, port: 1884, bind: 0.0.0.0
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.opendtu.0                : opendtu               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.opendtu.1                : opendtu               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.radar2.0                 : radar2                : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.reolink.0                : reolink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.reolink.1                : reolink               : RaspberryPi-Iobroker                     -  enabled
  system.adapter.reolink.2                : reolink               : RaspberryPi-Iobroker                     - disabled
+ system.adapter.reolink.3                : reolink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.shelly.0                 : shelly                : RaspberryPi-Iobroker                     -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.smartgarden.0            : smartgarden           : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.sonoff.0                 : sonoff                : RaspberryPi-Iobroker                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : RaspberryPi-Iobroker                     -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : RaspberryPi-Iobroker                     -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : RaspberryPi-Iobroker                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wled.0                   : wled                  : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.zigbee.0                 : zigbee                : RaspberryPi-Iobroker                     -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : RaspberryPi-Iobroker                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : RaspberryPi-Iobroker                     -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : RaspberryPi-Iobroker                     -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : RaspberryPi-Iobroker                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : RaspberryPi-Iobroker                     -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : RaspberryPi-Iobroker                     -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : RaspberryPi-Iobroker                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : RaspberryPi-Iobroker                     -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "device-watcher": 2.13.1  , installed 2.13.1
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "eusec"        : 2.0.3    , installed 2.0.3
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fullybrowser" : 3.1.2    , installed 3.1.2
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "iot"          : 5.0.7    , installed 5.0.7
Adapter    "iqontrol"     : 3.0.0    , installed 3.0.0
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Adapter    "jeelink"      : 1.2.5    , installed 1.2.5
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "netatmo-crawler": 1.1.0  , installed 1.1.0
Adapter    "opendtu"      : 3.1.0    , installed 3.1.0
Adapter    "radar2"       : 2.4.0    , installed 2.4.0
Adapter    "reolink"      : 1.2.3    , installed 1.2.3
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "smartgarden"  : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "wled"         : 0.7.2    , installed 0.7.2
Adapter    "ws"           : 2.6.2    , installed 3.0.19
Adapter    "zigbee"       : 3.1.5    , installed 3.2.5

Objects and States
Please stand by - This may take a while
Objects:        6945
States:         5883

*** OS-Repositories and Updates ***
W: https://deb.nodesource.com/node_24.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://archive.raspberrypi.com/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_24.x nodistro InRelease
Reading package lists...
W: https://deb.nodesource.com/node_24.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       1679096    51906/io.mqtt.0
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       1679168    51999/io.shelly.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       1681214    52018/io.sonoff.0
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       1679520    51393/iobroker.js-c
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       1679525    51393/iobroker.js-c
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          589619     18907/cupsd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          10440      1000/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          4716       1/init
tcp6       0      0 :::1984                 :::*                    LISTEN      1001       1681677    51883/go2rtc
tcp6       0      0 :::5900                 :::*                    LISTEN      985        8967       1014/wayvnc
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          589618     18907/cupsd
tcp6       0      0 :::8554                 :::*                    LISTEN      1001       1679923    51883/go2rtc
tcp6       0      0 :::8555                 :::*                    LISTEN      1001       1681679    51883/go2rtc
tcp6       0      0 :::21                   :::*                    LISTEN      0          8913       1001/vsftpd
tcp6       0      0 :::22                   :::*                    LISTEN      0          10442      1000/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          138        1/init
tcp6       0      0 :::8088                 :::*                    LISTEN      1001       1682622    52264/io.terminal.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       1679579    51415/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       1683698    52283/io.web.0
tcp6       0      0 :::3000                 :::*                    LISTEN      1001       1681715    51891/io.fullybrows
udp        0      0 0.0.0.0:49674           0.0.0.0:*                           101        769        710/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       1682326    52303/io.wled.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        767        710/avahi-daemon: r
udp        0      0 0.0.0.0:35232           0.0.0.0:*                           1001       1681024    51868/io.eusec.0
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       1681089    51951/io.radar2.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          137        1/init
udp6       0      0 :::5353                 :::*                                101        768        710/avahi-daemon: r
udp6       0      0 :::48540                :::*                                101        770        710/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          4717       1/init
udp6       0      0 :::8555                 :::*                                1001       1681680    51883/go2rtc

*** Log File - Last 25 Lines ***

2025-12-28 15:19:31.127  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: WR2000 ist noch gesperrt
2025-12-28 15:19:41.213  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 14 ▫ 13<>15 ▫ 14
2025-12-28 15:19:41.213  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:19:51.098  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: WR600 auf 34% (200W)
2025-12-28 15:19:51.098  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 14 ▫ 13<>15 ▫ 15
2025-12-28 15:19:51.098  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:20:01.124  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 15 ▫ 14<>17 ▫ 14
2025-12-28 15:20:01.124  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:20:11.163  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 14 ▫ 13<>15 ▫ 15
2025-12-28 15:20:11.163  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:20:21.095  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 14 ▫ 13<>15 ▫ 16
2025-12-28 15:20:31.167  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 16 ▫ 14<>18 ▫ 16
2025-12-28 15:20:31.167  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:20:41.125  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 16 ▫ 14<>18 ▫ 14
2025-12-28 15:20:41.125  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:20:49.009  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 in version "1.1.0" started with pid 57839
2025-12-28 15:20:51.177  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 16 ▫ 14<>18 ▫ 14
2025-12-28 15:20:51.178  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:21:01.159  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 16 ▫ 14<>18 ▫ 14
2025-12-28 15:21:01.159  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:21:01.601  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 having pid 57839 terminated with code 0 (NO_ERROR)
2025-12-28 15:21:11.348  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 16 ▫ 14<>18 ▫ 14
2025-12-28 15:21:11.348  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich
2025-12-28 15:21:21.491  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: 16 ▫ 14<>18 ▫ 15
2025-12-28 15:21:21.491  - info: javascript.0 (51489) script.js.PV:_Null_2_WR_autoSperre: keine Änderung, Limit WR2000 bleibt gleich

============ Mark until here for C&P =============

iob diag has finished.

[Gonzokalle]

@Thomas-Braun

martin@RaspberryPi-Iobroker:/opt/iobroker $ npm explain canvas
npm error No dependencies found matching canvas
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-28T14_23_22_531Z-debug-0.log
martin@RaspberryPi-Iobroker:/opt/iobroker $

[Thomas Braun]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

System is booting into 'graphical.target'.

Stell das auf Kommandozeilenbetrieb (multi-user) um.

EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs

Mit dem Dateisystem stimmt was nicht. Es sollten keine orphans beseitigt werden müssen. Nicht bei einem sauberen Bootvorgang.
Installier den eusec-Adapter nochmal aus dem Repo, nicht aus dem GitHub.

Mach das Null_2_WR_autoSperre-Skript weniger geschwätzig. Das kübelt dir ja das komplette Log dicht.

[Homoran]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Sieht doch ganz gut aus.

was nodejs v24 angeht, ja!

aber

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Display-Server: true

den brauchst du nur, wenn daran eine visu direkt am Server gezeigt werden soll

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:

stell das um, das verhindert mögliche Probleme.

und am schlimmsten

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Dec 27 16:58:56 2025] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs

De7n Dateisystem hat einen Schuss!
womöglich kommen deine Probleme daher

[Gonzokalle]

@Thomas-Braun
Desktop ist aus
Eusec ist aus dem Repo
Log ausgeschaltet

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: RaspberryPi-Iobroker
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 16:31:10 up 15 min,  2 users,  load average: 1.62, 0.64, 0.33
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sun 2025-12-28 16:31:10 CET
           Universal time: Sun 2025-12-28 15:31:10 UTC
                 RTC time: Sun 2025-12-28 15:31:10
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
martin
HOME=/home/martin
GROUPS=martin adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/martin
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Display-Manager:        * lightdm.service - Light Display Manager
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        3.2G        4.2G         26M        1.2G        5.3G
Swap:           2.1G          0B        2.1G
Total:           10G        3.2G        6.3G

Active iob-Instances:   30

         8063 M total memory
         3021 M used memory
         2865 M active memory
          758 M inactive memory
         3985 M free memory
          131 M buffer memory
         1035 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 16:31:10 up 15 min,  2 users,  load average: 1.62, 0.64, 0.33
Tasks: 221 total,   2 running, 219 sleeping,   0 stopped,   0 zombie
%Cpu(s): 25.0 us,  6.8 sy,  0.0 ni, 65.9 id,  0.0 wa,  0.0 hi,  2.3 si,  0.0 st
MiB Mem :   8063.0 total,   3984.8 free,   3022.7 used,   1167.7 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   5040.3 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     1.6G   16M  1.6G   1% /run
/dev/nvme0n1p2 ext4      917G   11G  869G   2% /
tmpfs          tmpfs     4.0G   32K  4.0G   1% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     4.0G  9.3M  4.0G   1% /tmp
/dev/nvme0n1p1 vfat      510M   86M  425M  17% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     807M  240K  807M   1% /run/user/1000
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyAMA10.service

Messages concerning ext4 filesystem in dmesg:
[Sun Dec 28 16:16:07 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:82:17:A3 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=e4c2f3ef-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE
[Sun Dec 28 16:16:09 2025] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs
[Sun Dec 28 16:16:09 2025] EXT4-fs (nvme0n1p2): mounted filesystem d6944274-f2f7-4644-96a4-213c3b367f5c ro with ordered data mode. Quota mode: none.
[Sun Dec 28 16:16:09 2025] EXT4-fs (nvme0n1p2): re-mounted d6944274-f2f7-4644-96a4-213c3b367f5c r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/nvme0n1p2 ext4   rw,noatime
`-/boot/firmware /dev/nvme0n1p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
251M    /var/cache
238M    /var/cache/apt
221M    /var/lib
154M    /var/lib/apt

Archived and active journals take up 9.3M in the file system.

/opt/iobroker/backups:
98M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
982M    /opt/iobroker/iobroker-data/
496M    /opt/iobroker/iobroker-data/history
319M    /opt/iobroker/iobroker-data/files
124M    /opt/iobroker/iobroker-data/backup-objects
67M     /opt/iobroker/iobroker-data/files/echarts.admin

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/objects.jsonl
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.70a15e1f.js.map
18M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.5fe9c7da.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-SHK_JeeLink_LaCrosse-if00-port0
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v24.12.0
/usr/bin/node           v24.12.0
/usr/bin/npm            11.6.2
/usr/bin/npx            11.6.2
/usr/bin/corepack       0.34.5

nodejs:
  Installed: 24.12.0-1nodesource1
  Candidate: 24.12.0-1nodesource1
  Version table:
 *** 24.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     24.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.0.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.0.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     24.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_24.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
RaspberryPi-Iobroker RaspberryPi-Iobroker (version: 7.0.7, hostname: RaspberryPi-Iobroker, alive, uptime: 902)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : RaspberryPi-Iobroker                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.backitup.0               : backitup              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.device-watcher.0         : device-watcher        : RaspberryPi-Iobroker                     -  enabled
  system.adapter.devices.0                : devices               : RaspberryPi-Iobroker                     - disabled
+ system.adapter.echarts.0                : echarts               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.eusec.0                  : eusec                 : RaspberryPi-Iobroker                     -  enabled
  system.adapter.flot.0                   : flot                  : RaspberryPi-Iobroker                     - disabled
+ system.adapter.fullybrowser.0           : fullybrowser          : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.history.0                : history               : RaspberryPi-Iobroker                     -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : RaspberryPi-Iobroker                     - disabled
+ system.adapter.iot.0                    : iot                   : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.iqontrol.0               : iqontrol              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.iqontrol.1               : iqontrol              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.javascript.0             : javascript            : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.jeelink.0                : jeelink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : RaspberryPi-Iobroker                     -  enabled, port: 1884, bind: 0.0.0.0
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.opendtu.0                : opendtu               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.opendtu.1                : opendtu               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.radar2.0                 : radar2                : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.reolink.0                : reolink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.reolink.1                : reolink               : RaspberryPi-Iobroker                     -  enabled
  system.adapter.reolink.2                : reolink               : RaspberryPi-Iobroker                     - disabled
+ system.adapter.reolink.3                : reolink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.shelly.0                 : shelly                : RaspberryPi-Iobroker                     -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.smartgarden.0            : smartgarden           : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.sonoff.0                 : sonoff                : RaspberryPi-Iobroker                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : RaspberryPi-Iobroker                     -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : RaspberryPi-Iobroker                     -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : RaspberryPi-Iobroker                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wled.0                   : wled                  : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.zigbee.0                 : zigbee                : RaspberryPi-Iobroker                     -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : RaspberryPi-Iobroker                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : RaspberryPi-Iobroker                     -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : RaspberryPi-Iobroker                     -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : RaspberryPi-Iobroker                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : RaspberryPi-Iobroker                     -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : RaspberryPi-Iobroker                     -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : RaspberryPi-Iobroker                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : RaspberryPi-Iobroker                     -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "device-watcher": 2.13.1  , installed 2.13.1
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "eusec"        : 2.0.3    , installed 2.0.3
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fullybrowser" : 3.1.2    , installed 3.1.2
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "iot"          : 5.0.7    , installed 5.0.7
Adapter    "iqontrol"     : 3.0.0    , installed 3.0.0
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Adapter    "jeelink"      : 1.2.5    , installed 1.2.5
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "netatmo-crawler": 1.1.0  , installed 1.1.0
Adapter    "opendtu"      : 3.1.0    , installed 3.1.0
Adapter    "radar2"       : 2.4.0    , installed 2.4.0
Adapter    "reolink"      : 1.2.3    , installed 1.2.3
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "smartgarden"  : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "wled"         : 0.7.2    , installed 0.7.2
Adapter    "ws"           : 2.6.2    , installed 3.0.19
Adapter    "zigbee"       : 3.1.5    , installed 3.2.5

Objects and States
Please stand by - This may take a while
Objects:        6930
States:         5930

*** OS-Repositories and Updates ***
W: https://deb.nodesource.com/node_24.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://archive.raspberrypi.com/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_24.x nodistro InRelease
Reading package lists...
W: https://deb.nodesource.com/node_24.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       10519      958/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       10514      958/iobroker.js-con
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          9375       957/cupsd
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          4355       1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11285      980/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       12414      1705/io.shelly.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       14349      1725/io.sonoff.0
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       11224      1613/io.mqtt.0
tcp6       0      0 :::3000                 :::*                    LISTEN      1001       11205      1598/io.fullybrowse
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       12958      1993/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       11398      1033/io.admin.0
tcp6       0      0 :::8088                 :::*                    LISTEN      1001       12911      1973/io.terminal.0
tcp6       0      0 :::111                  :::*                    LISTEN      0          4356       1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          11293      980/sshd: /usr/sbin
tcp6       0      0 :::21                   :::*                    LISTEN      0          9142       968/vsftpd
tcp6       0      0 :::8554                 :::*                    LISTEN      1001       11179      1589/go2rtc
tcp6       0      0 :::8555                 :::*                    LISTEN      1001       11180      1589/go2rtc
tcp6       0      0 :::5900                 :::*                    LISTEN      985        7569       1001/wayvnc
tcp6       0      0 :::1984                 :::*                    LISTEN      1001       8133       1589/go2rtc
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          9374       957/cupsd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       12986      2011/io.wled.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        7190       712/avahi-daemon: r
udp        0      0 0.0.0.0:36000           0.0.0.0:*                           101        7192       712/avahi-daemon: r
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       11994      1662/io.radar2.0
udp        0      0 0.0.0.0:32838           0.0.0.0:*                           1001       11176      1574/io.eusec.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          444        1/init
udp6       0      0 :::5353                 :::*                                101        7191       712/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          445        1/init
udp6       0      0 :::8555                 :::*                                1001       11181      1589/go2rtc
udp6       0      0 :::41681                :::*                                101        7193       712/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-12-28 16:20:49.009  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 in version "1.1.0" started with pid 2171
2025-12-28 16:20:53.255  - info: javascript.0 (1169) script.js.Temperaturen_&_Luftfeuchtigkeit.Temp_Terrasse_Status_an_Telegram: telegram: 🌡️ Terrasse unter 5°C
2025-12-28 16:20:59.220  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 having pid 2171 terminated with code 0 (NO_ERROR)
2025-12-28 16:21:55.020  - warn: radar2.0 (1662) scanDelay increased to 116.421 seconds, delayAway to 5 minutes!
2025-12-28 16:25:49.009  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 in version "1.1.0" started with pid 2871
2025-12-28 16:25:55.257  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 having pid 2871 terminated with code 0 (NO_ERROR)
2025-12-28 16:28:21.781  - info: device-watcher.0 (1554) Das folgende Gerät ist nicht mehr erreichbar:
Zigbee:  Licht Terrasse (16:17)
2025-12-28 16:30:01.968  - info: device-watcher.0 (1554) Das folgende Gerät ist nicht mehr erreichbar:
WLED:  WLED-Matrix-2 (16:18)
2025-12-28 16:30:02.060  - info: device-watcher.0 (1554) Das folgende Gerät ist nicht mehr erreichbar:
WLED:  WLED-Stab-1 (330 Tage)
2025-12-28 16:30:02.120  - info: device-watcher.0 (1554) Das folgende Gerät ist nicht mehr erreichbar:
WLED:  WLED-Dachrinne (16:18)
2025-12-28 16:30:02.173  - info: device-watcher.0 (1554) Das folgende Gerät ist nicht mehr erreichbar:
WLED:  WLED-Hütte (169 Tage)
2025-12-28 16:30:02.229  - info: device-watcher.0 (1554) Das folgende Gerät ist nicht mehr erreichbar:
WLED:  WLED-Matrix-1 (16:18)
2025-12-28 16:30:02.283  - info: device-watcher.0 (1554) Das folgende Gerät ist nicht mehr erreichbar:
WLED:  WLED-Stab-2 (330 Tage)
2025-12-28 16:30:07.398  - info: device-watcher.0 (1554) Das folgende Gerät ist nicht mehr erreichbar:
WLED:  WLED-SoundReactive (528 Tage)
2025-12-28 16:30:49.009  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 in version "1.1.0" started with pid 3660
2025-12-28 16:30:52.090  - info: javascript.0 (1169) script.js.Temperaturen_&_Luftfeuchtigkeit.Temp_Terrasse_Status_an_Telegram: telegram: 🌡️ Terrasse unter 0°C
2025-12-28 16:31:00.387  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 having pid 3660 terminated with code 0 (NO_ERROR)

============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

[Sun Dec 28 16:16:09 2025] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs

Ganz frischer Eintrag. Wenn du sauber gebootet hast, dann darf diese Meldung auf einem gesunden Datenträger nicht erscheinen.
Das ist dann ein starker Hinweis auf einen Defekt.

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

Wird ein 'false positive' sein, ich sehe nur nicht warum. Den Code habe ich aber in einer kommenden Version von iob diag an der Stelle geändert.

Jetzt installier den rpi2 mal:

 iobroker url iobroker.rpi2@latest  --debug

Edit: Sollte dann so aussehen:

echad@chet:/opt/iobroker $ iobroker url iobroker.rpi2@latest --debug
install iobroker.rpi2@latest
NPM version: 11.6.2
Installing iobroker.rpi2@latest... (System call)

up to date in 9s

254 packages are looking for funding
  run `npm fund` for details
upload [13] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [12] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [11] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [10] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [9] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [8] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [7] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [6] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [5] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [4] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
upload [3] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [2] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/jsonConfig.json jsonConfig.json application/json
upload [1] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/rpi2.png rpi2.png image/png
upload [0] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/words.js words.js application/javascript
Updating objects from io-package.json for adapter "rpi2" with version "3.0.2"

[Gonzokalle]

@Thomas-Braun sagte in RPI2 Adapter kann nicht installiert werden:

[Sun Dec 28 16:16:09 2025] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs

Ich hatte mit sudo reboot neu gestartet. Kann daher der Eintrag kommen?

Das sieht wieder schlecht aus.
Vielleicht sollte ich Trixie einfach nochmal neu aufspielen.

martin@RaspberryPi-Iobroker:~ $  iobroker url iobroker.rpi2@latest  --debug
install iobroker.rpi2@latest
NPM version: 11.6.2
Installing iobroker.rpi2@latest... (System call)
npm warn deprecated npmlog@4.1.2: This package is no longer supported.
npm warn deprecated rimraf@3.0.2: Rimraf versions prior to v4 are no longer supported
npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.
npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supported
npm warn deprecated gauge@2.7.4: This package is no longer supported.

> iobroker.rpi2@3.0.2 preinstall
> bash ./preinstall-check.sh

Checking package: libgpiod-dev >= 2.2
libgpiod-dev version OK: 2.2.1-2+deb13u1

> @stoprocent/bluetooth-hci-socket@1.5.2 install
> node-gyp-build


> @stoprocent/noble@1.19.1 install
> node-gyp-build

gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5501) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noble
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

> authenticate-pam@1.0.5 install
> node-gyp rebuild

gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5517) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

> cpu-features@0.0.10 install
> node buildcheck.js > buildcheck.gypi && node-gyp rebuild

gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5550) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/cpu-features
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

> diskusage@1.2.0 install
> node-gyp rebuild

gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5564) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/diskusage
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

> node-dht-sensor@0.4.5 install
> node-gyp configure

gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5580) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"
gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensor
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

> opengpio@2.0.2 install
> node-gyp rebuild

gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5594) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/opengpio
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
npm error code 6
npm error path /opt/iobroker/node_modules/opengpio
npm error command failed
npm error command sh -c node-gyp rebuild
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-28T16_00_16_769Z-debug-0.log
npm warn deprecated npmlog@4.1.2: This package is no longer supported.
npm warn deprecated rimraf@3.0.2: Rimraf versions prior to v4 are no longer supported
npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.
npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supported
npm warn deprecated gauge@2.7.4: This package is no longer supported.
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5501) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noble
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5517) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5550) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/cpu-features
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5564) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/diskusage
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5580) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"
gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensor
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@24.12.0 | linux | arm64
(node:5594) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp ERR! Completion callback never invoked!
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/opengpio
gyp ERR! node -v v24.12.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
npm error code 6
npm error path /opt/iobroker/node_modules/opengpio
npm error command failed
npm error command sh -c node-gyp rebuild
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-28T16_00_16_769Z-debug-0.log
host.RaspberryPi-Iobroker Cannot install iobroker.rpi2@latest: 6
martin@RaspberryPi-Iobroker:~ $ ^C

[Thomas Braun]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Kann daher der Eintrag kommen?

Grundsätzlich nicht. Dann hat der Datenträger wohl 'nen Schuß.
Tausch den baldmöglichst aus.

Vielleicht sollte ich Trixie einfach nochmal neu aufspielen.

Auf einem fitten Datenträger.

Die Meldungen kommen aber nicht vom OS, sondern von npm bzw. node-gyp.
Keine Ahnung, was da bei dir schief ist.
Das buildenvironment ist aber okay?

sudo apt install build-essential python3-dev python3-pip

versuchen.

[Homoran]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Ich hatte mit sudo reboot neu gestartet. Kann daher der Eintrag kommen?

nein!
Da gibt es defekte Dateien, und verwa7ste Reste, die nicht mehr zugeordnet werden können.

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Vielleicht sollte ich Trixie einfach nochmal neu aufspielen.

aber nur auf eine neue Speicherkarte

[Gonzokalle]

@Thomas-Braun

martin@RaspberryPi-Iobroker:~ $ sudo apt install build-essential python3-dev python3-pip
build-essential ist schon die neueste Version (12.12).
python3-dev ist schon die neueste Version (3.13.5-1).
python3-dev wurde als manuell installiert festgelegt.
python3-pip ist schon die neueste Version (25.1.1+dfsg-1+rpt1).
python3-pip wurde als manuell installiert festgelegt.
Zusammenfassung:
  Aktualisiere: 0, Installiere: 0, Entferne: 0, Aktualisiere nicht: 0
martin@RaspberryPi-Iobroker:~ $

[Thomas Braun]

@Gonzokalle

Und schmeiß den
system.adapter.terminal.0
raus. Der funktioniert seit Jahren nicht mehr richtig.

iob del terminal --debug

[Gonzokalle]

@Homoran

Ist ne NVME SSD 1TB von Samsung.
Erst ein Jahr alt.

[crunchip]

ich würde, wenn der rpi2 unbedingt benötigt wird, eher wieder zurück auf nodejs20 gehen und hoffen, dass bis April 26 das Problem gelöst wird.

[Homoran]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Ist ne NVME SSD 1TB von Samsung.
Erst ein Jahr alt.

und immer ordentlich runtergefahren / unmounted?

oder auch mal einfach abgezogen / Stecker raus?

BTW wo und wie ist die angeschlossen

[Thomas Braun]

@crunchip sagte in RPI2 Adapter kann nicht installiert werden:

ich würde, wenn der rpi2 unbedingt benötigt wird, eher wieder zurück auf nodejs20 gehen und hoffen, dass bis April 26 das Problem gelöst wird.

Nur das Problem kommt nicht vom rpi2 direkt. Hier läuft der nämlich auf nodejs 20 - 25 einwandfrei auf RaspberryOS 13 'Trixie'.
Da hängt noch irgendwas in der Build Pipeline. Deswegen will ich auch den terminal-Adapter loswerden, der wird ja schon geraume Zeit nicht mehr gepflegt.