NEWS
[ESPHome] Beta release 0.5.0-beta.1 ready
Tester
116
Beiträge
15
Kommentatoren
14.7k
Aufrufe
17
Watching
-
Bitte entschuldige meine Dummheit!
Problem hat sich vermutlich erledigt. Am Montag muss ich zu Hause die entsprechende Firmware der Geräte neu compilieren und runterladen.
Den Fehler habe ich schon einmal gemacht. Beim Testen einer Änderung hat sich ein bekannter Fehler eingeschlichen. Leider wird dieser nicht in ESP-Home angezeigt und daher war es schwierig diesen zu finden.
Danke nochmal für Deine Hilfe!!
Hans -
Bitte entschuldige meine Dummheit!
Problem hat sich vermutlich erledigt. Am Montag muss ich zu Hause die entsprechende Firmware der Geräte neu compilieren und runterladen.
Den Fehler habe ich schon einmal gemacht. Beim Testen einer Änderung hat sich ein bekannter Fehler eingeschlichen. Leider wird dieser nicht in ESP-Home angezeigt und daher war es schwierig diesen zu finden.
Danke nochmal für Deine Hilfe!!
Hans??? Im Code ist dann immer noch der fixe Verweis auf eine nicht mehr ausreichende Version drin. Warum sollte dich das 'vermutlich erledigt' haben?
-
Bitte entschuldige meine Dummheit!
Problem hat sich vermutlich erledigt. Am Montag muss ich zu Hause die entsprechende Firmware der Geräte neu compilieren und runterladen.
Den Fehler habe ich schon einmal gemacht. Beim Testen einer Änderung hat sich ein bekannter Fehler eingeschlichen. Leider wird dieser nicht in ESP-Home angezeigt und daher war es schwierig diesen zu finden.
Danke nochmal für Deine Hilfe!!
HansIch hab es mal für dich erledigt:
-
Vielen Dank und Dir einen schönen dritten Advent!
-
Kann mir jemand sagen, wie ich diese Warnung beim Compilieren weg bekomme?
<WARNING: Ignoring invalid distribution ~sphome (/home/iobroker/.cache/autopy/venv/esphome/lib/python3.13/site-packages)> -
Kann mir jemand sagen, wie ich diese Warnung beim Compilieren weg bekomme?
<WARNING: Ignoring invalid distribution ~sphome (/home/iobroker/.cache/autopy/venv/esphome/lib/python3.13/site-packages)> -
Moin Moin,
wenn ich das Dashboard einschalte kommt diese Fehlermeldung. Phyton3 ist installiert, Ubuntu 24.04
Wenn ich -m pip install eintippe kommt invalid option. bei Upgrade diese Warnung..., wie kann ich Phyton so intallieren das es von ESPhome genutzt werden kann??~$ pip install --upgrade pip / pip3 install --upgrade pip error: externally-managed-environment × This environment is externally managed ╰─> To install Python packages system-wide, try apt install python3-xyz, where xyz is the package you are trying to install. If you wish to install a non-Debian-packaged Python package, create a virtual environment using python3 -m venv path/to/venv. Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make sure you have python3-full installed. If you wish to install a non-Debian packaged Python application, it may be easiest to use pipx install xyz, which will manage a virtual environment for you. Make sure you have pipx installed. See /usr/share/doc/python3.12/README.venv for more information.2025-12-20 17:41:27.653 error Fatal error starting ESPHomeDashboard | Error: Command failed with exit code 1: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install esphome==2025.12.1 pillow==10.4.0 ERROR: Cannot install esphome==2025.12.1 and pillow==10.4.0 because these package versions have conflicting dependencies. [notice] A new release of pip is available: 24.3.1 -> 25.3 [notice] To update, run: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install --upgrade pip ERROR: ResolutionImpossible: for help visit https://pip.pypa.io/en/latest/topics/dependency-resolution/#dealing-with-dependency-conflicts Collecting esphome==2025.12.1 Downloading esphome-2025.12.1-py3-none-any.whl.metadata (3.6 kB) Collecting pillow==10.4.0 Using cached pillow-10.4.0-cp313-cp313-manylinux_2_28_x86_64.whl.metadata (9.2 kB) Collecting cryptography==45.0.1 (from esphome==2025.12.1) Using cached cryptography-45.0.1-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (5.7 kB) Collecting voluptuous==0.15.2 (from esphome==2025.12.1) Using cached voluptuous-0.15.2-py3-none-any.whl.metadata (20 kB) Collecting PyYAML==6.0.3 (from esphome==2025.12.1) Using cached pyyaml-6.0.3-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (2.4 kB) Collecting paho-mqtt==1.6.1 (from esphome==2025.12.1) Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting colorama==0.4.6 (from esphome==2025.12.1) Using cached colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) Collecting icmplib==3.0.4 (from esphome==2025.12.1) Using cached icmplib-3.0.4-py3-none-any.whl.metadata (19 kB) Collecting tornado==6.5.2 (from esphome==2025.12.1) Using cached tornado-6.5.2-cp39-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (2.8 kB) Collecting tzlocal==5.3.1 (from esphome==2025.12.1) Using cached tzlocal-5.3.1-py3-none-any.whl.metadata (7.6 kB) Collecting tzdata>=2021.1 (from esphome==2025.12.1) Using cached tzdata-2025.3-py2.py3-none-any.whl.metadata (1.4 kB) Collecting pyserial==3.5 (from esphome==2025.12.1) Using cached pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB) Collecting platformio==6.1.18 (from esphome==2025.12.1) Using cached platformio-6.1.18-py3-none-any.whl.metadata (7.1 kB) Collecting esptool==5.1.0 (from esphome==2025.12.1) Using cached esptool-5.1.0.tar.gz (383 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting click==8.1.7 (from esphome==2025.12.1) Using cached click-8.1.7-py3-none-any.whl.metadata (3.0 kB) Collecting esphome-dashboard==20251013.0 (from esphome==2025.12.1) Using cached esphome_dashboard-20251013.0-py3-none-any.whl.metadata (1.2 kB) Collecting aioesphomeapi==43.2.1 (from esphome==2025.12.1) Using cached aioesphomeapi-43.2.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (5.2 kB) Collecting zeroconf==0.148.0 (from esphome==2025.12.1) Using cached zeroconf-0.148.0-cp313-cp313-manylinux_2_36_x86_64.whl.metadata (6.3 kB) Collecting puremagic==1.30 (from esphome==2025.12.1) Using cached puremagic-1.30-py3-none-any.whl.metadata (5.8 kB) Collecting ruamel.yaml==0.18.16 (from esphome==2025.12.1) Using cached ruamel.yaml-0.18.16-py3-none-any.whl.metadata (25 kB) Collecting ruamel.yaml.clib==0.2.15 (from esphome==2025.12.1) Using cached ruamel_yaml_clib-0.2.15-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (3.5 kB) Collecting esphome-glyphsets==0.2.0 (from esphome==2025.12.1) Using cached esphome_glyphsets-0.2.0-py3-none-any.whl.metadata (3.9 kB) INFO: pip is looking at multiple versions of esphome to determine which version is compatible with other requirements. This could take a while. The conflict is caused by: The user requested pillow==10.4.0 esphome 2025.12.1 depends on pillow==11.3.0 To fix this you could try to: 1. loosen the range of package versions you've specified 2. remove package versions to allow pip to attempt to solve the dependency conflict | Error: Command failed with exit code 1: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install esphome==2025.12.1 pillow==10.4.0 ERROR: Cannot install esphome==2025.12.1 and pillow==10.4.0 because these package versions have conflicting dependencies. [notice] A new release of pip is available: 24.3.1 -> 25.3 [notice] To update, run: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install --upgrade pip ERROR: ResolutionImpossible: for help visit https://pip.pypa.io/en/latest/topics/dependency-resolution/#dealing-with-dependency-conflicts Collecting esphome==2025.12.1 Downloading esphome-2025.12.1-py3-none-any.whl.metadata (3.6 kB) Collecting pillow==10.4.0 Using cached pillow-10.4.0-cp313-cp313-manylinux_2_28_x86_64.whl.metadata (9.2 kB) Collecting cryptography==45.0.1 (from esphome==2025.12.1) Using cached cryptography-45.0.1-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (5.7 kB) Collecting voluptuous==0.15.2 (from esphome==2025.12.1) Using cached voluptuous-0.15.2-py3-none-any.whl.metadata (20 kB) Collecting PyYAML==6.0.3 (from esphome==2025.12.1) Using cached pyyaml-6.0.3-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (2.4 kB) Collecting paho-mqtt==1.6.1 (from esphome==2025.12.1) Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting colorama==0.4.6 (from esphome==2025.12.1) Using cached colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) Collecting icmplib==3.0.4 (from esphome==2025.12.1) Using cached icmplib-3.0.4-py3-none-any.whl.metadata (19 kB) Collecting tornado==6.5.2 (from esphome==2025.12.1) Using cached tornado-6.5.2-cp39-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (2.8 kB) Collecting tzlocal==5.3.1 (from esphome==2025.12.1) Using cached tzlocal-5.3.1-py3-none-any.whl.metadata (7.6 kB) Collecting tzdata>=2021.1 (from esphome==2025.12.1) Using cached tzdata-2025.3-py2.py3-none-any.whl.metadata (1.4 kB) Collecting pyserial==3.5 (from esphome==2025.12.1) Using cached pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB) Collecting platformio==6.1.18 (from esphome==2025.12.1) Using cached platformio-6.1.18-py3-none-any.whl.metadata (7.1 kB) Collecting esptool==5.1.0 (from esphome==2025.12.1) Using cached esptool-5.1.0.tar.gz (383 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting click==8.1.7 (from esphome==2025.12.1) Using cached click-8.1.7-py3-none-any.whl.metadata (3.0 kB) Collecting esphome-dashboard==20251013.0 (from esphome==2025.12.1) Using cached esphome_dashboard-20251013.0-py3-none-any.whl.metadata (1.2 kB) Collecting aioesphomeapi==43.2.1 (from esphome==2025.12.1) Using cached aioesphomeapi-43.2.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (5.2 kB) Collecting zeroconf==0.148.0 (from esphome==2025.12.1) Using cached zeroconf-0.148.0-cp313-cp313-manylinux_2_36_x86_64.whl.metadata (6.3 kB) Collecting puremagic==1.30 (from esphome==2025.12.1) Using cached puremagic-1.30-py3-none-any.whl.metadata (5.8 kB) Collecting ruamel.yaml==0.18.16 (from esphome==2025.12.1) Using cached ruamel.yaml-0.18.16-py3-none-any.whl.metadata (25 kB) Collecting ruamel.yaml.clib==0.2.15 (from esphome==2025.12.1) Using cached ruamel_yaml_clib-0.2.15-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (3.5 kB) Collecting esphome-glyphsets==0.2.0 (from esphome==2025.12.1) Using cached esphome_glyphsets-0.2.0-py3-none-any.whl.metadata (3.9 kB) INFO: pip is looking at multiple versions of esphome to determine which version is compatible with other requirements. This could take a while. The conflict is caused by: The user requested pillow==10.4.0 esphome 2025.12.1 depends on pillow==11.3.0 To fix this you could try to: 1. loosen the range of package versions you've specified 2. remove package versions to allow pip to attempt to solve the dependency conflict at makeError (file:///opt/iobroker/node_modules/autopy/node_modules/execa/lib/error.js:60:11) at handlePromise (file:///opt/iobroker/node_modules/autopy/node_modules/execa/index.js:124:26) at processTicksAndRejections (node:internal/process/task_queues:105:5) at $df9eabe9bda49ea8$export$e522f41234ab669a (file:///opt/iobroker/node_modules/autopy/src/index.ts:257:13) at Esphome.espHomeDashboard (/opt/iobroker/node_modules/iobroker.esphome/main.js:180:16) at Esphome.onReady (/opt/iobroker/node_modules/iobroker.esphome/main.js:66:4)Gruß
Erik :mrgreen: :mrgreen:
-
Thomas Braun
Dein Tip war goldrichtig! Auf der Seite war ich schon einmal, hatte mich aber nicht getraut die angegenbenen files zu löschen.
Danke!
Gruß und schöne Weihnachten
Hans -
Moin Moin,
wenn ich das Dashboard einschalte kommt diese Fehlermeldung. Phyton3 ist installiert, Ubuntu 24.04
Wenn ich -m pip install eintippe kommt invalid option. bei Upgrade diese Warnung..., wie kann ich Phyton so intallieren das es von ESPhome genutzt werden kann??~$ pip install --upgrade pip / pip3 install --upgrade pip error: externally-managed-environment × This environment is externally managed ╰─> To install Python packages system-wide, try apt install python3-xyz, where xyz is the package you are trying to install. If you wish to install a non-Debian-packaged Python package, create a virtual environment using python3 -m venv path/to/venv. Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make sure you have python3-full installed. If you wish to install a non-Debian packaged Python application, it may be easiest to use pipx install xyz, which will manage a virtual environment for you. Make sure you have pipx installed. See /usr/share/doc/python3.12/README.venv for more information.2025-12-20 17:41:27.653 error Fatal error starting ESPHomeDashboard | Error: Command failed with exit code 1: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install esphome==2025.12.1 pillow==10.4.0 ERROR: Cannot install esphome==2025.12.1 and pillow==10.4.0 because these package versions have conflicting dependencies. [notice] A new release of pip is available: 24.3.1 -> 25.3 [notice] To update, run: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install --upgrade pip ERROR: ResolutionImpossible: for help visit https://pip.pypa.io/en/latest/topics/dependency-resolution/#dealing-with-dependency-conflicts Collecting esphome==2025.12.1 Downloading esphome-2025.12.1-py3-none-any.whl.metadata (3.6 kB) Collecting pillow==10.4.0 Using cached pillow-10.4.0-cp313-cp313-manylinux_2_28_x86_64.whl.metadata (9.2 kB) Collecting cryptography==45.0.1 (from esphome==2025.12.1) Using cached cryptography-45.0.1-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (5.7 kB) Collecting voluptuous==0.15.2 (from esphome==2025.12.1) Using cached voluptuous-0.15.2-py3-none-any.whl.metadata (20 kB) Collecting PyYAML==6.0.3 (from esphome==2025.12.1) Using cached pyyaml-6.0.3-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (2.4 kB) Collecting paho-mqtt==1.6.1 (from esphome==2025.12.1) Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting colorama==0.4.6 (from esphome==2025.12.1) Using cached colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) Collecting icmplib==3.0.4 (from esphome==2025.12.1) Using cached icmplib-3.0.4-py3-none-any.whl.metadata (19 kB) Collecting tornado==6.5.2 (from esphome==2025.12.1) Using cached tornado-6.5.2-cp39-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (2.8 kB) Collecting tzlocal==5.3.1 (from esphome==2025.12.1) Using cached tzlocal-5.3.1-py3-none-any.whl.metadata (7.6 kB) Collecting tzdata>=2021.1 (from esphome==2025.12.1) Using cached tzdata-2025.3-py2.py3-none-any.whl.metadata (1.4 kB) Collecting pyserial==3.5 (from esphome==2025.12.1) Using cached pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB) Collecting platformio==6.1.18 (from esphome==2025.12.1) Using cached platformio-6.1.18-py3-none-any.whl.metadata (7.1 kB) Collecting esptool==5.1.0 (from esphome==2025.12.1) Using cached esptool-5.1.0.tar.gz (383 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting click==8.1.7 (from esphome==2025.12.1) Using cached click-8.1.7-py3-none-any.whl.metadata (3.0 kB) Collecting esphome-dashboard==20251013.0 (from esphome==2025.12.1) Using cached esphome_dashboard-20251013.0-py3-none-any.whl.metadata (1.2 kB) Collecting aioesphomeapi==43.2.1 (from esphome==2025.12.1) Using cached aioesphomeapi-43.2.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (5.2 kB) Collecting zeroconf==0.148.0 (from esphome==2025.12.1) Using cached zeroconf-0.148.0-cp313-cp313-manylinux_2_36_x86_64.whl.metadata (6.3 kB) Collecting puremagic==1.30 (from esphome==2025.12.1) Using cached puremagic-1.30-py3-none-any.whl.metadata (5.8 kB) Collecting ruamel.yaml==0.18.16 (from esphome==2025.12.1) Using cached ruamel.yaml-0.18.16-py3-none-any.whl.metadata (25 kB) Collecting ruamel.yaml.clib==0.2.15 (from esphome==2025.12.1) Using cached ruamel_yaml_clib-0.2.15-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (3.5 kB) Collecting esphome-glyphsets==0.2.0 (from esphome==2025.12.1) Using cached esphome_glyphsets-0.2.0-py3-none-any.whl.metadata (3.9 kB) INFO: pip is looking at multiple versions of esphome to determine which version is compatible with other requirements. This could take a while. The conflict is caused by: The user requested pillow==10.4.0 esphome 2025.12.1 depends on pillow==11.3.0 To fix this you could try to: 1. loosen the range of package versions you've specified 2. remove package versions to allow pip to attempt to solve the dependency conflict | Error: Command failed with exit code 1: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install esphome==2025.12.1 pillow==10.4.0 ERROR: Cannot install esphome==2025.12.1 and pillow==10.4.0 because these package versions have conflicting dependencies. [notice] A new release of pip is available: 24.3.1 -> 25.3 [notice] To update, run: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install --upgrade pip ERROR: ResolutionImpossible: for help visit https://pip.pypa.io/en/latest/topics/dependency-resolution/#dealing-with-dependency-conflicts Collecting esphome==2025.12.1 Downloading esphome-2025.12.1-py3-none-any.whl.metadata (3.6 kB) Collecting pillow==10.4.0 Using cached pillow-10.4.0-cp313-cp313-manylinux_2_28_x86_64.whl.metadata (9.2 kB) Collecting cryptography==45.0.1 (from esphome==2025.12.1) Using cached cryptography-45.0.1-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (5.7 kB) Collecting voluptuous==0.15.2 (from esphome==2025.12.1) Using cached voluptuous-0.15.2-py3-none-any.whl.metadata (20 kB) Collecting PyYAML==6.0.3 (from esphome==2025.12.1) Using cached pyyaml-6.0.3-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (2.4 kB) Collecting paho-mqtt==1.6.1 (from esphome==2025.12.1) Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting colorama==0.4.6 (from esphome==2025.12.1) Using cached colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB) Collecting icmplib==3.0.4 (from esphome==2025.12.1) Using cached icmplib-3.0.4-py3-none-any.whl.metadata (19 kB) Collecting tornado==6.5.2 (from esphome==2025.12.1) Using cached tornado-6.5.2-cp39-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (2.8 kB) Collecting tzlocal==5.3.1 (from esphome==2025.12.1) Using cached tzlocal-5.3.1-py3-none-any.whl.metadata (7.6 kB) Collecting tzdata>=2021.1 (from esphome==2025.12.1) Using cached tzdata-2025.3-py2.py3-none-any.whl.metadata (1.4 kB) Collecting pyserial==3.5 (from esphome==2025.12.1) Using cached pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB) Collecting platformio==6.1.18 (from esphome==2025.12.1) Using cached platformio-6.1.18-py3-none-any.whl.metadata (7.1 kB) Collecting esptool==5.1.0 (from esphome==2025.12.1) Using cached esptool-5.1.0.tar.gz (383 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting click==8.1.7 (from esphome==2025.12.1) Using cached click-8.1.7-py3-none-any.whl.metadata (3.0 kB) Collecting esphome-dashboard==20251013.0 (from esphome==2025.12.1) Using cached esphome_dashboard-20251013.0-py3-none-any.whl.metadata (1.2 kB) Collecting aioesphomeapi==43.2.1 (from esphome==2025.12.1) Using cached aioesphomeapi-43.2.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (5.2 kB) Collecting zeroconf==0.148.0 (from esphome==2025.12.1) Using cached zeroconf-0.148.0-cp313-cp313-manylinux_2_36_x86_64.whl.metadata (6.3 kB) Collecting puremagic==1.30 (from esphome==2025.12.1) Using cached puremagic-1.30-py3-none-any.whl.metadata (5.8 kB) Collecting ruamel.yaml==0.18.16 (from esphome==2025.12.1) Using cached ruamel.yaml-0.18.16-py3-none-any.whl.metadata (25 kB) Collecting ruamel.yaml.clib==0.2.15 (from esphome==2025.12.1) Using cached ruamel_yaml_clib-0.2.15-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (3.5 kB) Collecting esphome-glyphsets==0.2.0 (from esphome==2025.12.1) Using cached esphome_glyphsets-0.2.0-py3-none-any.whl.metadata (3.9 kB) INFO: pip is looking at multiple versions of esphome to determine which version is compatible with other requirements. This could take a while. The conflict is caused by: The user requested pillow==10.4.0 esphome 2025.12.1 depends on pillow==11.3.0 To fix this you could try to: 1. loosen the range of package versions you've specified 2. remove package versions to allow pip to attempt to solve the dependency conflict at makeError (file:///opt/iobroker/node_modules/autopy/node_modules/execa/lib/error.js:60:11) at handlePromise (file:///opt/iobroker/node_modules/autopy/node_modules/execa/index.js:124:26) at processTicksAndRejections (node:internal/process/task_queues:105:5) at $df9eabe9bda49ea8$export$e522f41234ab669a (file:///opt/iobroker/node_modules/autopy/src/index.ts:257:13) at Esphome.espHomeDashboard (/opt/iobroker/node_modules/iobroker.esphome/main.js:180:16) at Esphome.onReady (/opt/iobroker/node_modules/iobroker.esphome/main.js:66:4)@Rogni sagte in [ESPHome] Beta release 0.5.0-beta.1 ready:
pip install esphome==2025.12.1 pillow==10.4.0 ERROR: Cannot install esphome==2025.12.1 and pillow==10.4.0 because these package versions have conflicting dependencies.
Du musst die aktuelle (Beta)-Version des Adapters verwenden.
€dit: Kann auch sein, dass der Code noch nicht gemerged ist. Dann abwarten...Siehe auch:
-
@simonf04
Hat leider nicht geklappt,oder mache ich was falsch??So wurde installiert:
Bild Link)dann kam:
$ iobroker upgrade esphome@https://github.com/SimonFischer04/ioBroker.esphome/tree/fix/343 --debug Can not check version information to display upgrade infos: Invalid Version: https://github.com/SimonFischer04/ioBroker.esphome/tree/fix/343 Could not uninstall npm packet "iobroker.esphome": Invalid Version: https://github.com/SimonFischer04/ioBroker.esphome/tree/fix/343 NPM version: 10.9.4 Installing iobroker.esphome@https://github.com/SimonFischer04/ioBroker.esphome/tree/fix/343... (System call) npm error code 1npm error The git reference could not be foundnpm error command git --no-replace-objects checkout fixnpm error error: pathspec 'fix' did not match any file(s) known to git npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-21T14_21_44_346Z-debug-0.log Updating objects from io-package.json for adapter "esphome" with version "0.6.3" Update "system.adapter.esphome.0" upload [26] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/admin.d.ts admin.d.ts video/mp2t upload [18] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [17] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [16] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [15] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/i18n/uk/translations.json i18n/uk/translations.json application/json upload [14] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [13] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/ESPHomeDashboardUrl.png img/ESPHomeDashboardUrl.png image/png upload [12] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/ESPhomeDashboardIP.png img/ESPhomeDashboardIP.png image/png upload [11] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/connectionIssue.png img/connectionIssue.png image/png upload [10] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/connectionOK.png img/connectionOK.png image/png upload [9] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/dashboard.png img/dashboard.png image/png upload [8] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/deviceTabEmpty.png img/deviceTabEmpty.png image/png upload [7] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/deviceTree.png img/deviceTree.png image/png upload [6] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/flashFromThisComputer.png img/flashFromThisComputer.png image/png upload [5] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/img/proxy.png img/proxy.png image/png upload [4] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/index_m.html index_m.html text/html upload [3] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/jsonConfig.json5 jsonConfig.json5 application/json5 upload [2] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/style.css style.css text/css upload [1] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/tsconfig.json tsconfig.json application/json upload [0] esphome.admin /opt/iobroker/node_modules/iobroker.esphome/admin/words.js words.js application/javascript Process exited with code 0und der Fehler ist gleich:
7 Log-Größe: 43.1 KB Zeit esphome.0 2025-12-21 15:22:56.354 error Fatal error starting ESPHomeDashboard | Error: Command failed with exit code 1: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install esphome==2025.12.1 pillow==10.4.0ERROR: Cannot install esphome==2025.12.1 and pillow==10.4.0 because these package versions have conflicting dependencies.[notice] A new release of pip is available: 24.3.1 -> 25.3[notice] To update, run: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install --upgrade pipERROR: ResolutionImpossible: for help visit https://pip.pypa.io/en/latest/topics/dependency-resolution/#dealing-with-dependency-conflictsCollecting esphome==2025.12.1 Using cached esphome-2025.12.1-py3-none-any.whl.metadata (3.6 kB)Collecting pillow==10.4.0 Using cached pillow-10.4.0-cp313-cp313-manylinux_2_28_x86_64.whl.metadata (9.2 kB)Collecting cryptography==45.0.1 (from esphome==2025.12.1) Using cached cryptography-45.0.1-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (5.7 kB)Collecting voluptuous==0.15.2 (from esphome==2025.12.1) Using cached voluptuous-0.15.2-py3-none-any.whl.metadata (20 kB)Collecting PyYAML==6.0.3 (from esphome==2025.12.1) Using cached pyyaml-6.0.3-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (2.4 kB)Collecting paho-mqtt==1.6.1 (from esphome==2025.12.1) Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done'Collecting colorama==0.4.6 (from esphome==2025.12.1) Using cached colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB)Collecting icmplib==3.0.4 (from esphome==2025.12.1) Using cached icmplib-3.0.4-py3-none-any.whl.metadata (19 kB)Collecting tornado==6.5.2 (from esphome==2025.12.1) Using cached tornado-6.5.2-cp39-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (2.8 kB)Collecting tzlocal==5.3.1 (from esphome==2025.12.1) Using cached tzlocal-5.3.1-py3-none-any.whl.metadata (7.6 kB)Collecting tzdata>=2021.1 (from esphome==2025.12.1) Using cached tzdata-2025.3-py2.py3-none-any.whl.metadata (1.4 kB)Collecting pyserial==3.5 (from esphome==2025.12.1) Using cached pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB)Collecting platformio==6.1.18 (from esphome==2025.12.1) Using cached platformio-6.1.18-py3-none-any.whl.metadata (7.1 kB)Collecting esptool==5.1.0 (from esphome==2025.12.1) Using cached esptool-5.1.0.tar.gz (383 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done'Collecting click==8.1.7 (from esphome==2025.12.1) Using cached click-8.1.7-py3-none-any.whl.metadata (3.0 kB)Collecting esphome-dashboard==20251013.0 (from esphome==2025.12.1) Using cached esphome_dashboard-20251013.0-py3-none-any.whl.metadata (1.2 kB)Collecting aioesphomeapi==43.2.1 (from esphome==2025.12.1) Using cached aioesphomeapi-43.2.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (5.2 kB)Collecting zeroconf==0.148.0 (from esphome==2025.12.1) Using cached zeroconf-0.148.0-cp313-cp313-manylinux_2_36_x86_64.whl.metadata (6.3 kB)Collecting puremagic==1.30 (from esphome==2025.12.1) Using cached puremagic-1.30-py3-none-any.whl.metadata (5.8 kB)Collecting ruamel.yaml==0.18.16 (from esphome==2025.12.1) Using cached ruamel.yaml-0.18.16-py3-none-any.whl.metadata (25 kB)Collecting ruamel.yaml.clib==0.2.15 (from esphome==2025.12.1) Using cached ruamel_yaml_clib-0.2.15-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (3.5 kB)Collecting esphome-glyphsets==0.2.0 (from esphome==2025.12.1) Using cached esphome_glyphsets-0.2.0-py3-none-any.whl.metadata (3.9 kB)INFO: pip is looking at multiple versions of esphome to determine which version is compatible with other requirements. This could take a while.The conflict is caused by: The user requested pillow==10.4.0 esphome 2025.12.1 depends on pillow==11.3.0To fix this you could try to:1. loosen the range of package versions you've specified2. remove package versions to allow pip to attempt to solve the dependency conflict | Error: Command failed with exit code 1: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install esphome==2025.12.1 pillow==10.4.0ERROR: Cannot install esphome==2025.12.1 and pillow==10.4.0 because these package versions have conflicting dependencies.[notice] A new release of pip is available: 24.3.1 -> 25.3[notice] To update, run: /home/iobroker/.cache/autopy/venv/esphome/bin/python3 -m pip install --upgrade pipERROR: ResolutionImpossible: for help visit https://pip.pypa.io/en/latest/topics/dependency-resolution/#dealing-with-dependency-conflictsCollecting esphome==2025.12.1 Using cached esphome-2025.12.1-py3-none-any.whl.metadata (3.6 kB)Collecting pillow==10.4.0 Using cached pillow-10.4.0-cp313-cp313-manylinux_2_28_x86_64.whl.metadata (9.2 kB)Collecting cryptography==45.0.1 (from esphome==2025.12.1) Using cached cryptography-45.0.1-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (5.7 kB)Collecting voluptuous==0.15.2 (from esphome==2025.12.1) Using cached voluptuous-0.15.2-py3-none-any.whl.metadata (20 kB)Collecting PyYAML==6.0.3 (from esphome==2025.12.1) Using cached pyyaml-6.0.3-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (2.4 kB)Collecting paho-mqtt==1.6.1 (from esphome==2025.12.1) Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done'Collecting colorama==0.4.6 (from esphome==2025.12.1) Using cached colorama-0.4.6-py2.py3-none-any.whl.metadata (17 kB)Collecting icmplib==3.0.4 (from esphome==2025.12.1) Using cached icmplib-3.0.4-py3-none-any.whl.metadata (19 kB)Collecting tornado==6.5.2 (from esphome==2025.12.1) Using cached tornado-6.5.2-cp39-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (2.8 kB)Collecting tzlocal==5.3.1 (from esphome==2025.12.1) Using cached tzlocal-5.3.1-py3-none-any.whl.metadata (7.6 kB)Collecting tzdata>=2021.1 (from esphome==2025.12.1) Using cached tzdata-2025.3-py2.py3-none-any.whl.metadata (1.4 kB)Collecting pyserial==3.5 (from esphome==2025.12.1) Using cached pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB)Collecting platformio==6.1.18 (from esphome==2025.12.1) Using cached platformio-6.1.18-py3-none-any.whl.metadata (7.1 kB)Collecting esptool==5.1.0 (from esphome==2025.12.1) Using cached esptool-5.1.0.tar.gz (383 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done'Collecting click==8.1.7 (from esphome==2025.12.1) Using cached click-8.1.7-py3-none-any.whl.metadata (3.0 kB)Collecting esphome-dashboard==20251013.0 (from esphome==2025.12.1) Using cached esphome_dashboard-20251013.0-py3-none-any.whl.metadata (1.2 kB)Collecting aioesphomeapi==43.2.1 (from esphome==2025.12.1) Using cached aioesphomeapi-43.2.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (5.2 kB)Collecting zeroconf==0.148.0 (from esphome==2025.12.1) Using cached zeroconf-0.148.0-cp313-cp313-manylinux_2_36_x86_64.whl.metadata (6.3 kB)Collecting puremagic==1.30 (from esphome==2025.12.1) Using cached puremagic-1.30-py3-none-any.whl.metadata (5.8 kB)Collecting ruamel.yaml==0.18.16 (from esphome==2025.12.1) Using cached ruamel.yaml-0.18.16-py3-none-any.whl.metadata (25 kB)Collecting ruamel.yaml.clib==0.2.15 (from esphome==2025.12.1) Using cached ruamel_yaml_clib-0.2.15-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (3.5 kB)Collecting esphome-glyphsets==0.2.0 (from esphome==2025.12.1) Using cached esphome_glyphsets-0.2.0-py3-none-any.whl.metadata (3.9 kB)INFO: pip is looking at multiple versions of esphome to determine which version is compatible with other requirements. This could take a while.The conflict is caused by: The user requested pillow==10.4.0 esphome 2025.12.1 depends on pillow==11.3.0To fix this you could try to:1. loosen the range of package versions you've specified2. remove package versions to allow pip to attempt to solve the dependency conflict at makeError (file:///opt/iobroker/node_modules/autopy/node_modules/execa/lib/error.js:60:11) at handlePromise (file:///opt/iobroker/node_modules/autopy/node_modules/execa/index.js:124:26) at processTicksAndRejections (node:internal/process/task_queues:105:5) at $df9eabe9bda49ea8$export$e522f41234ab669a (file:///opt/iobroker/node_modules/autopy/src/index.ts:257:13) at Esphome.espHomeDashboard (/opt/iobroker/node_modules/iobroker.esphome/main.js:179:16) at Esphome.onReady (/opt/iobroker/node_modules/iobroker.esphome/main.js:65:4) esphome.0 2025-12-21 15:22:36.700 info Native Integration of ESPHome Dashboard enabled, making environment ready esphome.0 2025-12-21 15:22:36.141 info starting. Version 0.6.3 in /opt/iobroker/node_modules/iobroker.esphome, node: v22.21.0, js-controller: 7.1.0 esphome.0 2025-12-21 15:19:53.143 info terminating esphome.0 2025-12-21 15:19:53.143 info terminating esphome.0 2025-12-21 15:19:52.643 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason esphome.0 2025-12-21 15:19:52.641 info terminating -
nur zur Info, diese Warn Meldung kommt ab und an beim Start:
admin.0 2025-12-22 08:45:04.926 warn esphome has an invalid jsonConfig: [{"instancePath":"/items/devices/items/newDevicesTable","schemaPath":"#/patternProperties/%5E.%2B/allOf/27/then/additionalProperties","keyword":"additionalProperties","params":{"additionalProperty":"doNotSave"},"message":"must NOT have additional properties"},{"instancePath":"/items/devices","schemaPath":"#/properties/items/patternProperties/%5E.%2B/allOf/9/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"","schemaPath":"#/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"}]Mit dem Dashboard kämpfe ich noch ein bischen rum. Momentan lässt es sich noch nicht starten.
Cache ist geleert ;)Edith sqgt, das Ganze nochmal sauber deinstaliert, iob fix, und dann wieder installiert, bewirkt Wunder ;)
-
Ist es möglich dieses Projekt auf IObroker zu adaptieren?? [Link Text]
(http://192.168.10.183:8123/reterminal-dashboard)
das ist für Home Assistant und ist sehr komfortabel für diese Art von Displays
@Rogni sagte in [ESPHome] Beta release 0.5.0-beta.1 ready:
Mit einem link zu etwas bei dir lokal kann ich leider nicht viel anfangen.😉
Aber einfach mal probieren, 99% der yamls sollten 1zu1 gleich funktionieren.
-
😂😂😂wo Du recht hast, hast Du recht @simonf04 😂😂😂
kommt davon wenn man tausend Sachen gleichzeitig macht :)@Rogni ok, das ist etwas deutlich anderes.
Sorry, aber vermute mal das ist ziemlich low priority.
Designer ist auch online verfügbar: https://koosoli.github.io/ESPHomeDesigner/Und dann kannst das yaml auch einfach ins dashboard copy pasten..
Support us
855
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge