Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Thomas Braun]

@Neuling

Eigentlich sollte der
iob fix
das installieren. Und eigentlich darf es auch keinen Unterschied machen, ob du 'iobroker fix' oder 'iob fix' verwendest. Auf einem gesunden System jedenfalls nicht.

sudo apt update
sudo apt install distro-info
sudo apt full-upgrade

Und dann die Ausgabe von

iob diag

nochmal.

[Neuling]

beim update gibt es Fehler, aber wohl nur für Grafana, also erstmal unwichtig für mein Problem nehme ich an

OK:1 http://security.debian.org bookworm-security InRelease
OK:2 http://ftp.de.debian.org/debian stable InRelease
OK:3 http://ftp.de.debian.org/debian bookworm InRelease
OK:4 https://repos.influxdata.com/debian stable InRelease
Holen:5 https://packages.grafana.com/oss/deb stable InRelease [7.660 B]
OK:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Fehl:5 https://packages.grafana.com/oss/deb stable InRelease
  Die folgenden Signaturen waren ungültig: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com>
Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
Aktualisierung für 149 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen.
W: https://packages.grafana.com/oss/deb/dists/stable/InRelease: Schlüssel ist im veralteten Schlüsselbund trusted.gpg gespeichert (/etc/apt/trusted.gpg), siehe den Abschnitt MISSBILLIGUNG in apt-key(8) für Details.
W: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. GPG-Fehler: https://packages.grafana.com/oss/deb stable InRelease: Die folgenden Signaturen waren ungültig: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com>
W: Fehlschlag beim Holen von https://packages.grafana.com/oss/deb/dists/stable/InRelease Die folgenden Signaturen waren ungültig: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com>
W: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt.

dann bei der Installation von distro-info leider diese Meldung

sudo apt install distro-info
E: Der dpkg-Prozess wurde unterbrochen; Sie müssen manuell »sudo dpkg --configure -a« ausführen, um das Problem zu beheben.

führe ich das dann aus...

 sudo dpkg --configure -a
libice6:amd64 (2:1.1.1-1) wird eingerichtet ...
wget (1.25.0-2) wird eingerichtet ...
libice-dev:amd64 (2:1.1.1-1) wird eingerichtet ...
influxdb (1.12.2-1) wird eingerichtet ...

Konfigurationsdatei »/etc/influxdb/influxdb.conf«
 ==> Geändert (von Ihnen oder von einem Skript) seit der Installation.
 ==> Paketverteiler hat eine aktualisierte Version herausgegeben.
   Wie möchten Sie vorgehen? Ihre Wahlmöglichkeiten sind:
    Y oder I : Die Version des Paket-Betreuers installieren
    N oder O : Die momentan installierte Version beibehalten
       D     : Die Unterschiede zwischen den Versionen anzeigen
       Z     : Eine Shell starten, um die Situation zu begutachten
 Der Standardweg ist das Beibehalten der momentanen Version.
*** influxdb.conf (Y/I/N/O/D/Z) [Vorgabe=N] ?

Ich stecke leider zuwenig im Thema drin und kann mich nicht erinnern was ich an der influxdb.conf geändert habe bei der Installation (glaube 1,5Jahre ist das her)
habe also erstmal beibehalten.
Danach dann distro-info installiert und full-upgrade
dabei kam dann auch ein Fenster dass in influxdata.list eine neue Version verfügbar ist, diese bei mir aber auch geändert ist (da wäre ich mir eher sicher dass ich da nie etwas drin gemacht habe) habe also auch da erstmal die alte beibehalten

der neue Auszug von iob diag ist dann:

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
Failed to query product UUID, ignoring: Access denied
Failed to query hardware serial, ignoring: Access denied
 Static hostname: iobroker-m720
       Icon name: computer-desktop
         Chassis: desktop 🖥️
          Kernel: Linux 6.1.0-35-amd64
    Architecture: x86-64
 Hardware Vendor: Lenovo
  Hardware Model: ThinkCentre M720q
Firmware Version: M1UKT28A
   Firmware Date: Mon 2019-02-18
    Firmware Age: 6y 9month 2w 1d
OS is similar to:

model name      : Intel(R) Pentium(R) Gold G5400T CPU @ 3.10GHz
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 15:15:56 up  3:20,  1 user,  load average: 0.45, 0.39, 0.30
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

This system needs to be REBOOTED!


*** TIME AND TIMEZONES ***
               Local time: Wed 2025-12-03 15:15:56 CET
           Universal time: Wed 2025-12-03 14:15:56 UTC
                 RTC time: Wed 2025-12-03 14:15:56
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
difflock
HOME=/home/difflock
GROUPS=difflock cdrom floppy sudo audio dip video plugdev users netdev iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/difflock
GROUPS=iobroker tty dialout audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        2.1G        3.4G        1.2M        3.0G        6.1G
Swap:           1.0G          0B        1.0G
Total:          9.2G        2.1G        4.4G

Active iob-Instances:   17

         7809 M total memory
         2011 M used memory
          705 M active memory
         3506 M inactive memory
         3259 M free memory
           40 M buffer memory
         2798 M swap cache
          975 M total swap
            0 M used swap
          975 M free swap

*** top - Table Of Processes  ***
top - 15:15:57 up  3:20,  1 user,  load average: 0.45, 0.39, 0.30
Tasks: 143 total,   1 running, 142 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  2.1 sy,  0.0 ni, 97.9 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7809.8 total,   3259.6 free,   2011.8 used,   2839.4 buff/cache
MiB Swap:    976.0 total,    976.0 free,      0.0 used.   5798.0 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs          tmpfs     781M  888K  781M   1% /run
/dev/sda1      ext4      233G  170G   51G  77% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     781M     0  781M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Dec  3 11:55:23 2025] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Dec  3 11:55:24 2025] EXT4-fs (sda1): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET SOURCE    FSTYPE OPTIONS
/      /dev/sda1 ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
8.6G    /var/
4.1G    /var/log
4.0G    /var/log/journal/eddcef84366443e3a0c4183916204c8b
4.0G    /var/log/journal
3.6G    /var/lib

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 19.6M in the file system.

/opt/iobroker/backups:
156G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
236M    /opt/iobroker/iobroker-data/
174M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
18M     /opt/iobroker/iobroker-data/objects.jsonl
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-C_W7K-9p.js
5.4M    /opt/iobroker/iobroker-data/files/jarvis/js/index-2c99918a.js
4.6M    /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js
3.7M    /opt/iobroker/iobroker-data/files/telegram.admin/custom/assets/index-DS28Nms8.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a3d7220b339ef11a5a757f454516304-if00-port0
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0e9895e5b345ed119b65c68f0a86e0b4-if00-port0

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB1

HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.6
/usr/bin/node           v20.19.6
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.34.1

nodejs:
  Installed: 20.19.6-1nodesource1
  Candidate: 20.19.6-1nodesource1
  Version table:
 *** 20.19.6-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.19.5-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.2+dfsg-1 500
        500 http://ftp.de.debian.org/debian stable/main amd64 Packages
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.20.4+dfsg-1~deb12u1 500
        500 http://ftp.de.debian.org/debian bookworm/main amd64 Packages
        500 http://security.debian.org bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobroker-m720       iobroker-m720 (version: 7.0.7, hostname: iobroker-m720 , alive, uptime: 12032)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker-m720                            -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker-m720                            -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker-m720                            -  enabled
  system.adapter.daswetter.0              : daswetter             : iobroker-m720                            - disabled
  system.adapter.device-reminder.0        : device-reminder       : iobroker-m720                            - disabled
  system.adapter.discovery.0              : discovery             : iobroker-m720                            - disabled
+ system.adapter.email.0                  : email                 : iobroker-m720                            -  enabled
  system.adapter.history.0                : history               : iobroker-m720                            - disabled
+ system.adapter.hue.0                    : hue                   : iobroker-m720                            -  enabled, port: 443
  system.adapter.influxdb.0               : influxdb              : iobroker-m720                            - disabled, port: 8086
  system.adapter.jarvis.0                 : jarvis                : iobroker-m720                            - disabled
+ system.adapter.javascript.0             : javascript            : iobroker-m720                            -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : iobroker-m720                            -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker-m720                            -  enabled, port: 1883, bind: 192.168.178.37
  system.adapter.ping.0                   : ping                  : iobroker-m720                            - disabled
+ system.adapter.shelly.0                 : shelly                : iobroker-m720                            -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : iobroker-m720                            -  enabled
+ system.adapter.smartcontrol.0           : smartcontrol          : iobroker-m720                            -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker-m720                            -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.tesla-motors.0           : tesla-motors          : iobroker-m720                            - disabled
  system.adapter.tr-064.0                 : tr-064                : iobroker-m720                            - disabled
+ system.adapter.tuya.0                   : tuya                  : iobroker-m720                            -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker-m720                            - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker-m720                            - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : iobroker-m720                            - disabled
  system.adapter.vis-lcars.0              : vis-lcars             : iobroker-m720                            - disabled
  system.adapter.vis-plumb.0              : vis-plumb             : iobroker-m720                            - disabled
  system.adapter.vis.0                    : vis                   : iobroker-m720                            - disabled
+ system.adapter.web.0                    : web                   : iobroker-m720                            -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : iobroker-m720                            - disabled
+ system.adapter.zigbee.0                 : zigbee                : iobroker-m720                            -  enabled, port: /dev/ttyUSB1
+ system.adapter.zigbee.1                 : zigbee                : iobroker-m720                            -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker-m720                            -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.hue.0                    : hue                   : iobroker-m720                            -  enabled, port: 443
+ system.adapter.mqtt.0                   : mqtt                  : iobroker-m720                            -  enabled, port: 1883, bind: 192.168.178.37
+ system.adapter.shelly.0                 : shelly                : iobroker-m720                            -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : iobroker-m720                            -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker-m720                            -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker-m720                            -  enabled, port: /dev/ttyUSB1
+ system.adapter.zigbee.1                 : zigbee                : iobroker-m720                            -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
┌──────────────────────────────────────────────────────────────────────────────────────────────
│ (index) │ name     │ url                                                     │ auto upgrade │
├──────────────────────────────────────────────────────────────────────────────────────────────
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└──────────────────────────────────────────────────────────────────────────────────────────────

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "daswetter"    : 3.2.8    , installed 3.2.3  [Updatable]
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "fb-checkpresence": 1.4.2 , installed 1.4.1  [Updatable]
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hue"          : 3.16.2   , installed 3.16.2
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "lgtv"         : 2.5.0    , installed 2.5.0
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "ping"         : 1.7.9    , installed 1.6.2  [Updatable]
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "shuttercontrol": 2.0.7   , installed 2.0.7
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartcontrol" : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "tesla-motors" : 1.3.2    , installed 1.3.2
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-lcars"    : 1.1.1    , installed 1.1.1
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "whatsapp-cmb" : 0.3.0    , installed 0.3.0
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee"       : 3.1.5    , installed 3.1.5

Objects and States
Please stand by - This may take a while
Objects:        7943
States:         6188

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://packages.grafana.com/oss/deb stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://security.debian.org bookworm-security InRelease
Hit:2 http://ftp.de.debian.org/debian stable InRelease
Hit:3 https://repos.influxdata.com/debian stable InRelease
Hit:4 http://ftp.de.debian.org/debian bookworm InRelease
Get:5 https://packages.grafana.com/oss/deb stable InRelease [7660 B]
Err:5 https://packages.grafana.com/oss/deb stable InRelease
  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://packages.grafana.com/oss/deb stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.178.37:1883     0.0.0.0:*               LISTEN      1001       18204      1036/io.mqtt.0
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          16167      863/exim4
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       17281      825/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       17781      825/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          17628      517/sshd: /usr/sbin
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          144297     1/systemd
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       20859      1051/io.shelly.0
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        16105      813/influxd
tcp6       0      0 :::3000                 :::*                    LISTEN      104        17812      824/grafana
tcp6       0      0 :::8086                 :::*                    LISTEN      999        16111      813/influxd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       19862      869/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       21020      1143/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          17630      517/sshd: /usr/sbin
tcp6       0      0 :::111                  :::*                    LISTEN      0          143296     1/systemd
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          16168      863/exim4
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       20923      1097/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       20924      1097/io.tuya.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          143294     1/systemd
udp6       0      0 :::111                  :::*                                0          143298     1/systemd

*** Log File - Last 25 Lines ***

2025-12-03 14:34:57.814  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] publishOnSubscribe
2025-12-03 14:34:57.815  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] publishOnSubscribe
2025-12-03 14:38:39.926  - info: zigbee.0 (1081) Failed to ping 0x84182600000c84f9 Plug 01 for {"failed":1,"reported":2} attempts
2025-12-03 14:45:00.024  - info: javascript.0 (961) script.js.Gasverbrauchsberechnungen: Leistung Gasheizung: 3.8734695999033715 kW
2025-12-03 14:45:00.037  - info: javascript.0 (961) script.js.Steckdose-Mobil-1-Zaehler: MOBIL-Ausgefuehrt
2025-12-03 14:49:13.496  - info: web.0 (1143) ==> Connected system.user.admin from ::ffff:192.168.178.113
2025-12-03 14:49:21.054  - info: web.0 (1143) <== Disconnect system.user.admin from ::ffff:192.168.178.113 vis.0
2025-12-03 14:49:57.473  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] connection closed: closed
2025-12-03 14:50:05.603  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] connected with secret 1764769805601_9608
2025-12-03 14:50:05.733  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] subscribes on "mqtt.0.esphome.discover"
2025-12-03 14:50:05.736  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] subscribes on "mqtt.0.esphome.ping.esp8266-heizung"
2025-12-03 14:50:05.934  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] publishOnSubscribe
2025-12-03 14:50:05.937  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] publishOnSubscribe
2025-12-03 14:56:50.250  - info: zigbee.0 (1081) Failed to ping 0x84182600000c84f9 Plug 01 for {"failed":1,"reported":3} attempts
2025-12-03 14:57:51.954  - info: admin.0 (869) ==> Connected system.user.admin from ::ffff:192.168.178.54
2025-12-03 15:00:00.021  - info: javascript.0 (961) script.js.Steckdose-Mobil-1-Zaehler: MOBIL-Ausgefuehrt
2025-12-03 15:00:00.032  - info: javascript.0 (961) script.js.Gasverbrauchsberechnungen: Leistung Gasheizung: 3.8734695999033715 kW
2025-12-03 15:05:05.570  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] connection closed: closed
2025-12-03 15:05:13.654  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] connected with secret 1764770713654_3747
2025-12-03 15:05:13.789  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] subscribes on "mqtt.0.esphome.discover"
2025-12-03 15:05:13.793  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] subscribes on "mqtt.0.esphome.ping.esp8266-heizung"
2025-12-03 15:05:13.989  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] publishOnSubscribe
2025-12-03 15:05:13.993  - info: mqtt.0 (1036) Client [esp8266-heizung-a4cf12c8e6df] publishOnSubscribe
2025-12-03 15:15:00.034  - info: javascript.0 (961) script.js.Gasverbrauchsberechnungen: Leistung Gasheizung: 4.5374929600386515 kW
2025-12-03 15:15:00.050  - info: javascript.0 (961) script.js.Steckdose-Mobil-1-Zaehler: MOBIL-Ausgefuehrt

============ Mark until here for C&P =============

[Neuling]

so ich habe in der Ausgabe gesehen dass reboot nötig war, das habe ich gemacht und jetzt geht es wieder!

Vielen vielen dank, kann man kurz und einfach sagen was das Problem war?

[Thomas Braun]

@Neuling sagte in iobroker kann nicht mehr in influx schreiben:

aber wohl nur für Grafana, also erstmal unwichtig für mein Problem

Jein, das hängt alles miteinander zusammen. Die Paketverwaltung muss stimmig sein.
Leg sowohl die Quelle für Grafana wie auch die für Influxdb nochmal neu an:

https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind

kann mich nicht erinnern was ich an der influxdb.conf geändert habe

Deswegen kann man sich die "Unterschiede zwischen den Versionen anzeigen" lassen...

diese bei mir aber auch geändert ist (da wäre ich mir eher sicher dass ich da nie etwas drin gemacht habe) habe also auch da erstmal die alte beibehalten

Da hättest du die Version des Paket-Betreuers nehmen müssen. Es wurden Schlüssel geändert.

This system needs to be REBOOTED!

Tu das (nachdem die Quellen gefixt wurden) und dann einen frischen Lauf von

iob diag

[Neuling]

Hallo Thomas, falls du meinen zweiten Post übersehen hast, dank dir läuft es wieder! DANKE

hier noch der neue Auszug von iob diag

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
Failed to query product UUID, ignoring: Access denied
Failed to query hardware serial, ignoring: Access denied
 Static hostname: iobroker-m720
       Icon name: computer-desktop
         Chassis: desktop 🖥️
          Kernel: Linux 6.12.57+deb13-amd64
    Architecture: x86-64
 Hardware Vendor: Lenovo
  Hardware Model: ThinkCentre M720q
Firmware Version: M1UKT28A
   Firmware Date: Mon 2019-02-18
    Firmware Age: 6y 9month 2w 1d
OS is similar to:

model name      : Intel(R) Pentium(R) Gold G5400T CPU @ 3.10GHz
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 15:27:24 up 8 min,  1 user,  load average: 0.95, 0.56, 0.29
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-12-03 15:27:25 CET
           Universal time: Wed 2025-12-03 14:27:25 UTC
                 RTC time: Wed 2025-12-03 14:27:25
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
difflock
HOME=/home/difflock
GROUPS=difflock cdrom floppy sudo audio dip video plugdev users netdev iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/difflock
GROUPS=iobroker tty dialout audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        2.4G        5.1G        1.1M        972M        5.8G
Swap:           1.0G          0B        1.0G
Total:          9.2G        2.4G        6.1G

Active iob-Instances:   18

         7816 M total memory
         2241 M used memory
         2337 M active memory
          350 M inactive memory
         4886 M free memory
           83 M buffer memory
          844 M swap cache
          975 M total swap
            0 M used swap
          975 M free swap

*** top - Table Of Processes  ***
top - 15:27:25 up 8 min,  1 user,  load average: 0.95, 0.56, 0.29
Tasks: 156 total,   1 running, 155 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.2 us,  0.0 sy,  0.0 ni, 95.6 id,  2.2 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7816.4 total,   4884.6 free,   2242.8 used,    928.3 buff/cache
MiB Swap:    976.0 total,    976.0 free,      0.0 used.   5573.5 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs          tmpfs     782M  872K  781M   1% /run
/dev/sda1      ext4      233G  170G   52G  77% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     3.9G     0  3.9G   0% /tmp
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     782M  8.0K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Dec  3 15:19:06 2025] EXT4-fs (sda1): mounted filesystem c162d8ba-0ead-4573-a867-ead64aaef46a ro with ordered data mode. Quota mode: none.
[Wed Dec  3 15:19:07 2025] EXT4-fs (sda1): re-mounted c162d8ba-0ead-4573-a867-ead64aaef46a r/w.

Show mounted filesystems:
TARGET SOURCE    FSTYPE OPTIONS
/      /dev/sda1 ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
8.6G    /var/
4.1G    /var/log
4.0G    /var/log/journal/eddcef84366443e3a0c4183916204c8b
4.0G    /var/log/journal
3.6G    /var/lib

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 19.6M in the file system.

/opt/iobroker/backups:
156G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
246M    /opt/iobroker/iobroker-data/
174M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
26M     /opt/iobroker/iobroker-data/objects.jsonl
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-C_W7K-9p.js
5.4M    /opt/iobroker/iobroker-data/files/jarvis/js/index-2c99918a.js
5.1M    /opt/iobroker/iobroker-data/states.jsonl
4.6M    /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0e9895e5b345ed119b65c68f0a86e0b4-if00-port0
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a3d7220b339ef11a5a757f454516304-if00-port0

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB1

HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.6
/usr/bin/node           v20.19.6
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.34.1

nodejs:
  Installed: 20.19.6-1nodesource1
  Candidate: 20.19.6-1nodesource1
  Version table:
 *** 20.19.6-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.19.5-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.2+dfsg-1 500
        500 http://ftp.de.debian.org/debian stable/main amd64 Packages
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.20.4+dfsg-1~deb12u1 500
        500 http://ftp.de.debian.org/debian bookworm/main amd64 Packages
        500 http://security.debian.org bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobroker-m720       iobroker-m720 (version: 7.0.7, hostname: iobroker-m720 , alive, uptime: 498)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker-m720                            -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker-m720                            -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker-m720                            -  enabled
  system.adapter.daswetter.0              : daswetter             : iobroker-m720                            - disabled
  system.adapter.device-reminder.0        : device-reminder       : iobroker-m720                            - disabled
  system.adapter.discovery.0              : discovery             : iobroker-m720                            - disabled
+ system.adapter.email.0                  : email                 : iobroker-m720                            -  enabled
  system.adapter.history.0                : history               : iobroker-m720                            - disabled
+ system.adapter.hue.0                    : hue                   : iobroker-m720                            -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : iobroker-m720                            -  enabled, port: 8086
  system.adapter.jarvis.0                 : jarvis                : iobroker-m720                            - disabled
+ system.adapter.javascript.0             : javascript            : iobroker-m720                            -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : iobroker-m720                            -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker-m720                            -  enabled, port: 1883, bind: 192.168.178.37
  system.adapter.ping.0                   : ping                  : iobroker-m720                            - disabled
+ system.adapter.shelly.0                 : shelly                : iobroker-m720                            -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : iobroker-m720                            -  enabled
+ system.adapter.smartcontrol.0           : smartcontrol          : iobroker-m720                            -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker-m720                            -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.tesla-motors.0           : tesla-motors          : iobroker-m720                            - disabled
  system.adapter.tr-064.0                 : tr-064                : iobroker-m720                            - disabled
+ system.adapter.tuya.0                   : tuya                  : iobroker-m720                            -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker-m720                            - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker-m720                            - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : iobroker-m720                            - disabled
  system.adapter.vis-lcars.0              : vis-lcars             : iobroker-m720                            - disabled
  system.adapter.vis-plumb.0              : vis-plumb             : iobroker-m720                            - disabled
  system.adapter.vis.0                    : vis                   : iobroker-m720                            - disabled
+ system.adapter.web.0                    : web                   : iobroker-m720                            -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : iobroker-m720                            - disabled
+ system.adapter.zigbee.0                 : zigbee                : iobroker-m720                            -  enabled, port: /dev/ttyUSB1
+ system.adapter.zigbee.1                 : zigbee                : iobroker-m720                            -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker-m720                            -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.hue.0                    : hue                   : iobroker-m720                            -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : iobroker-m720                            -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : iobroker-m720                            -  enabled, port: 1883, bind: 192.168.178.37
+ system.adapter.shelly.0                 : shelly                : iobroker-m720                            -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : iobroker-m720                            -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker-m720                            -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker-m720                            -  enabled, port: /dev/ttyUSB1
+ system.adapter.zigbee.1                 : zigbee                : iobroker-m720                            -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
┌──────────────────────────────────────────────────────────────────────────────────────────────
│ (index) │ name     │ url                                                     │ auto upgrade │
├──────────────────────────────────────────────────────────────────────────────────────────────
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└──────────────────────────────────────────────────────────────────────────────────────────────

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "daswetter"    : 3.2.8    , installed 3.2.3  [Updatable]
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "fb-checkpresence": 1.4.2 , installed 1.4.1  [Updatable]
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hue"          : 3.16.2   , installed 3.16.2
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "lgtv"         : 2.5.0    , installed 2.5.0
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "ping"         : 1.7.9    , installed 1.6.2  [Updatable]
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "shuttercontrol": 2.0.7   , installed 2.0.7
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartcontrol" : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "tesla-motors" : 1.3.2    , installed 1.3.2
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-lcars"    : 1.1.1    , installed 1.1.1
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "whatsapp-cmb" : 0.3.0    , installed 0.3.0
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee"       : 3.1.5    , installed 3.1.5

Objects and States
Please stand by - This may take a while
Objects:        7943
States:         6227

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://packages.grafana.com/oss/deb stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://security.debian.org bookworm-security InRelease
Hit:2 http://ftp.de.debian.org/debian stable InRelease
Hit:3 https://repos.influxdata.com/debian stable InRelease
Hit:4 http://ftp.de.debian.org/debian bookworm InRelease
Get:5 https://packages.grafana.com/oss/deb stable InRelease [7660 B]
Err:5 https://packages.grafana.com/oss/deb stable InRelease
  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://packages.grafana.com/oss/deb stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key B53AE77BADB630A683046005963FA27710458545, which is needed to verify signature.
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        9055       981/influxd
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       6965       1236/io.shelly.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       4832       1027/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       6686       1027/iobroker.js-co
tcp        0      0 192.168.178.37:1883     0.0.0.0:*               LISTEN      1001       6898       1221/io.mqtt.0
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          4817       1048/exim4
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          4694       708/sshd: /usr/sbin
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          4253       1/init
tcp6       0      0 :::8086                 :::*                    LISTEN      999        4786       981/influxd
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       10457      1344/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       6746       1074/io.admin.0
tcp6       0      0 :::3000                 :::*                    LISTEN      104        9106       1026/grafana
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          4818       1048/exim4
tcp6       0      0 :::22                   :::*                    LISTEN      0          4696       708/sshd: /usr/sbin
tcp6       0      0 :::111                  :::*                    LISTEN      0          4255       1/init
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          4254       1/init
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       8103       1298/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       8104       1298/io.tuya.0
udp6       0      0 :::111                  :::*                                0          4256       1/init

*** Log File - Last 25 Lines ***

2025-12-03 15:20:58.668  - info: influxdb.0 (1374) enabled logging of 3D-Drucker-AMS-12-Temperatur, Alias=true, 215 points now activated
2025-12-03 15:20:58.668  - info: influxdb.0 (1374) enabled logging of 3D-Drucker-AMS-12-Luftfeuchtigkeit, Alias=true, 216 points now activated
2025-12-03 15:20:58.668  - info: influxdb.0 (1374) enabled logging of 3D-Drucker-Filamentlager-Temperatur, Alias=true, 217 points now activated
2025-12-03 15:20:58.668  - info: influxdb.0 (1374) enabled logging of 3D-Drucker-Filamentlager-Luftfeuchtigkeit, Alias=true, 218 points now activated
2025-12-03 15:20:58.668  - info: influxdb.0 (1374) enabled logging of 3D-Drucker-AMS-34-Temperatur, Alias=true, 219 points now activated
2025-12-03 15:20:58.668  - info: influxdb.0 (1374) enabled logging of 3D-Drucker-AMS-34-Luftfeuchtigkeit, Alias=true, 220 points now activated
2025-12-03 15:20:58.668  - info: influxdb.0 (1374) enabled logging of Heizung-Druck-ADG, Alias=true, 221 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Heizung-Gaestezimmer-Thermostat-Temperatur-IST, Alias=true, 222 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Heizung-Gaestezimmer-Thermostat-Temperatur-SOLL, Alias=true, 223 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Heizung-Wintergarten-Mauer-Thermostat-Temperatur-IST, Alias=true, 224 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Heizung-Wintergarten-Mauer-Thermostat-Temperatur-SOLL, Alias=true, 225 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Heizung-Wintergarten-Fenster-Thermostat-Temperatur-IST, Alias=true, 226 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Heizung-Wintergarten-Fenster-Thermostat-Temperatur-SOLL, Alias=true, 227 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of TEST_ERDFEUCHTE_TEMPERATUR, Alias=true, 228 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of TEST_ERDFEUCHTE_FEUCHTE, Alias=true, 229 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Sensor-Küche-Temperatur, Alias=true, 230 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Sensor-Küche-Luftfeuchtigkeit, Alias=true, 231 points now activated
2025-12-03 15:20:58.669  - info: influxdb.0 (1374) enabled logging of Heizung-Karin-WZ-Schiebetür-Thermostat-Temperatur-IST, Alias=true, 232 points now activated
2025-12-03 15:20:58.670  - info: influxdb.0 (1374) enabled logging of Heizung-Karin-WZ-Schiebetür-Thermostat-Temperatur-SOLL, Alias=true, 233 points now activated
2025-12-03 15:20:58.670  - info: influxdb.0 (1374) enabled logging of Heizung-Office-Thermostat-Temperatur-SOLL, Alias=true, 234 points now activated
2025-12-03 15:20:58.670  - info: influxdb.0 (1374) enabled logging of Heizung-Office-Thermostat-Temperatur-IST, Alias=true, 235 points now activated
2025-12-03 15:20:58.670  - info: influxdb.0 (1374) enabled logging of Steckdose_Bettheizung_W, Alias=true, 236 points now activated
2025-12-03 15:20:58.670  - info: influxdb.0 (1374) enabled logging of Steckdose_Bettheizung_kWh, Alias=true, 237 points now activated
2025-12-03 15:20:58.811  - info: influxdb.0 (1374) Do not store value "nan" for Heizung-Temperatur-Umgebung because no number
2025-12-03 15:21:51.033  - info: tuya.0 (1298) bf532c5bb0ecc573f57gzi: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.172:6668

Ich werde jetzt mal gucken ob ich das mit den Quellen hin bekomme nach deinem Link. Und wenn du sagst ich hätte die Paketbetreuer Version nehmen sollen, kann ich das wieder "gerade biegen" wenn ich einfach die Schnitte nochmal mache und dann entsprechend die aktuelle Version nehmen auswähle?

[Thomas Braun]

@Neuling sagte in iobroker kann nicht mehr in influx schreiben:

Und wenn du sagst ich hätte die Paketbetreuer Version nehmen sollen, kann ich das wieder "gerade biegen" wenn ich einfach die Schnitte nochmal mache

Ja, die jeweiligen Schritte aus dem 'Phantastische Repos'-Thread biegen das auf den aktuellen Stand, wie ihn auch der Paketbetreuer vorsieht.

Zu den weiteren Nicklichkeiten:

Setz den user 'difflock' noch in die Gruppen 'adm,dialout' rein:

sudo usermod -a -G adm,dialout difflock

(Danach reboot).

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

Mach das:

sudo systemctl set-default multi-user.target

Zu Zigbee: Setzt da dringend die 'Links-by-id', nicht die Geräte-Dateien.
Bei deiner Konstellation können die auch mal getauscht werden. Das passiert dir bei den Links-by-id nicht.

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0e9895e5b345ed119b65c68f0a86e0b4-if00-port0
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a3d7220b339ef11a5a757f454516304-if00-port0

Nodejs auf Version 22 bringen:

iob nodejs-update

Die drei iob-Adapter aktualisieren.

[Neuling]

hab wieder etwas kaputt bekommen :)

Habe jetzt die Grafana und influx Quellen neu angelegt, dabei kam es jeweils bei zweiten Schritt löschen der keyrings zur Meldung dass diese nicht vorhanden sind. Der Rest ging.
Der Benutzer und multi-user.tareget hab ich auch gemacht.
Zigbee und node js noch nicht, aaaaaber:

Jetzt kommt nach reboot keine Ausgabe mehr bei iob diag?

difflock@iobroker-m720:~$ iob diag
[sudo] Passwort für difflock:
difflock@iobroker-m720:~$ 

[Thomas Braun]

@Neuling

Jetzt kommt nach reboot keine Ausgabe mehr bei iob diag?

Da klemmt irgendwas auf dem iobroker.net-Server.
Versuch mal:

curl -L -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

[Neuling]

curl -L -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

difflock@iobroker-m720:~$ curl -L -o diag.sh https://iobroker.net/diag.sh && bash diag.sh
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   169  100   169    0     0   1344      0 --:--:-- --:--:-- --:--:--  1341
100   240  100   240    0     0   1040      0 --:--:-- --:--:-- --:--:--  1040
100    62  100    62    0     0    213      0 --:--:-- --:--:-- --:--:--   213
100   169  100   169    0     0    535      0 --:--:-- --:--:-- --:--:--   535
100   240  100   240    0     0    704      0 --:--:-- --:--:-- --:--:--   704
100    62  100    62    0     0    173      0 --:--:-- --:--:-- --:--:--   173
100   169  100   169    0     0    442      0 --:--:-- --:--:-- --:--:--   442
100   240  100   240    0     0    589      0 --:--:-- --:--:-- --:--:--   589
100    62  100    62    0     0    146      0 --:--:-- --:--:-- --:--:--   146
100   169  100   169    0     0    377      0 --:--:-- --:--:-- --:--:--   377
100   240  100   240    0     0    497      0 --:--:-- --:--:-- --:--:--   497
100    62  100    62    0     0    124      0 --:--:-- --:--:-- --:--:--   124
100   169  100   169    0     0    323      0 --:--:-- --:--:-- --:--:--   323
100   240  100   240    0     0    438      0 --:--:-- --:--:-- --:--:--   438
100    62  100    62    0     0    109      0 --:--:-- --:--:-- --:--:--   109
100   169  100   169    0     0    287      0 --:--:-- --:--:-- --:--:--   287
100   240  100   240    0     0    388      0 --:--:-- --:--:-- --:--:--   388
100    62  100    62    0     0     97      0 --:--:-- --:--:-- --:--:--    97
100   169  100   169    0     0    256      0 --:--:-- --:--:-- --:--:--   256
100   240  100   240    0     0    351      0 --:--:-- --:--:-- --:--:--   351
100    62  100    62    0     0     88      0 --:--:-- --:--:-- --:--:--    88
100   169  100   169    0     0    233      0 --:--:-- --:--:-- --:--:--   233
100   240  100   240    0     0    318      0 --:--:-- --:--:-- --:--:--   318
100    62  100    62    0     0     80      0 --:--:-- --:--:-- --:--:--    80
100   169  100   169    0     0    212      0 --:--:-- --:--:-- --:--:--   212
100   240  100   240    0     0    292      0 --:--:-- --:--:-- --:--:--   292
100    62  100    62    0     0     74      0 --:--:-- --:--:-- --:--:--    74
100   169  100   169    0     0    196      0 --:--:-- --:--:-- --:--:--   196
100   240  100   240    0     0    270      0 --:--:-- --:--:-- --:--:--   270
100    62  100    62    0     0     68      0 --:--:-- --:--:-- --:--:--    68
100   169  100   169    0     0    182      0 --:--:-- --:--:-- --:--:--   182
100   240  100   240    0     0    252      0 --:--:-- --:--:-- --:--:--   252
100    62  100    62    0     0     64      0 --:--:-- --:--:-- --:--:--    64
100   169  100   169    0     0    170      0 --:--:-- --:--:-- --:--:--   170
100   240  100   240    0     0    235      0  0:00:01  0:00:01 --:--:--   235
100    62  100    62    0     0     59      0  0:00:01  0:00:01 --:--:--     0
100   169  100   169    0     0    159      0  0:00:01  0:00:01 --:--:--   159
100   240  100   240    0     0    220      0  0:00:01  0:00:01 --:--:--   220
100    62  100    62    0     0     56      0  0:00:01  0:00:01 --:--:--    56
100   169  100   169    0     0    149      0  0:00:01  0:00:01 --:--:--   149
100   240  100   240    0     0    208      0  0:00:01  0:00:01 --:--:--   208
100    62  100    62    0     0     53      0  0:00:01  0:00:01 --:--:--    53
100   169  100   169    0     0    141      0  0:00:01  0:00:01 --:--:--   141
100   240  100   240    0     0    196      0  0:00:01  0:00:01 --:--:--   196
100    62  100    62    0     0     50      0  0:00:01  0:00:01 --:--:--    50
100   169  100   169    0     0    134      0  0:00:01  0:00:01 --:--:--   134
100   240  100   240    0     0    186      0  0:00:01  0:00:01 --:--:--   186
100    62  100    62    0     0     47      0  0:00:01  0:00:01 --:--:--    47
100   169  100   169    0     0    127      0  0:00:01  0:00:01 --:--:--   127
100   240  100   240    0     0    177      0  0:00:01  0:00:01 --:--:--   177
100    62  100    62    0     0     45      0  0:00:01  0:00:01 --:--:--    45
curl: (47) Maximum (50) redirects followed

[Neuling]

iob nodejs-update scheint auch nichts zu machen

difflock@iobroker-m720:~$ iob nodejs-update
difflock@iobroker-m720:~$

[Neuling]

also der iobroker läuft aber, grafana zeigt mir auch aktuelle Werte an

[Thomas Braun]

@Neuling sagte in iobroker kann nicht mehr in influx schreiben:

iob nodejs-update scheint auch nichts zu machen

Auch das kommt vom iobroker.net-Server.

[Neuling]

ach hab es nicht verstanden, es klemmt also nicht an meinem server, dann werde ich später oder morgen weiter probieren, danke nochmal

[Neuling]

Der iob diag geht jetzt natürlich wieder, nodejs habe ich auch erfolgreich aktualisiert.

an as zigbee mit Links-by-id traue ich mich jetzt zu so später Stunde noch nicht ran nachdem ich beim googeln gelesen habe dass einige ihren Adapter da nicht mehr gefunden haben. Hoffe ich komme am Wochenende dazu

Dir nochmal ein besonderes großes Dankeschön Thomas

[Thomas Braun]

@Neuling sagte in iobroker kann nicht mehr in influx schreiben:

beim googeln gelesen habe dass einige ihren Adapter da nicht mehr gefunden haben.

Genau das 'nicht mehr finden' wird doch durch die Links vermieden.