UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[ticaki]

@muuulle sagte in Betatest NSPanel-lovelace-ui v0.6.x:

Bei mir geht der Screensaver beim Betrachten der pagePower nicht mehr an. Auch wenn die Option deaktiviert ist.

Aktuelle TFT?

@Armilar ist da noch das alte drin?

[Armilar]

@ticaki

TFT v5.0.2 ist für alle neu

[ticaki]

Es könnte auch sein das es bei einem sendType zurück gesetzt wird - das kommt aktuell bei jedem 16ten update - minimale updatetime bei Page Power ist 2 Sekunden - also timeout länger als 30 Sekunden könnte den Screensaver verhindern. Kann das jemand bestätigen?

Ein Fehler - wird behoben.

[Chris_71]

@ticaki

Bei mir lässt sich der Adapter nicht installieren.

$ iobroker url iobroker.nspanel-lovelace-ui@latest --host ioBroker --debug
install iobroker.nspanel-lovelace-ui@latest
NPM version: 10.8.2Installing iobroker.nspanel-lovelace-ui@latest... (System call)
> @stoprocent/bleno@0.11.4 install
> node-gyp-build
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64
gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/blenogyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
> @stoprocent/noble@2.3.6 install> node-gyp-build
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64
gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noblegyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
> classic-level@3.0.0 install> node-gyp-build
gyp info it worked if it ends with ok
gyp info using node-gyp@7.1.2
gyp info using node@20.19.5 | linux | x64
gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
gyp ERR! UNCAUGHT EXCEPTION
gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
npm error code 7
npm error path /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui/node_modules/classic-level
npm error command failed
npm error command sh -c node-gyp-build
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-23T12_28_05_016Z-debug-0.log
gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/blenogyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noblegyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui/node_modules/classic-levelgyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.npm error code 7npm error path /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui/node_modules/classic-levelnpm error command failednpm error command sh -c node-gyp-buildnpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-23T12_28_05_016Z-debug-0.log
host.ioBroker Cannot install iobroker.nspanel-lovelace-ui@latest: 7
ERROR: Process exited with code 25

[apollon77]

@chris_71 Nutzt du auch homekit-controller oder ble Adapter? Wenn ja kann der fehler da her kommen

[ticaki]

Ich kenne mich ja absolut nicht damit aus - hatte einen ähnliche (ich weiß es echt nicht) gyp fehler und mit viel chatGPT falsch aussagen hat dann am Ende

sudo apt update
sudo apt install python3 python3-dev python3-pip build-essential
sudo pip3 install --upgrade setuptools

Beim homekit-controller funktioniert. Aber wirklich keine Ahnung ob das der gleiche Fehler war!

[Chris_71]

@apollon77

Den BLE Adapter hatte ich mal installiert - ist aber schon länger wieder deinstalliert worden

[ilovegym]

@chris_71

zeig doch mal das komplette "iob diag" in code-tags bitte

[Chris_71]

@ilovegym

Hier die Ausgabe von iob diag:

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 11 (bullseye)
   Static hostname: ioBroker
         Icon name: computer-vm
           Chassis: vm
    Virtualization: kvm
            Kernel: Linux 5.10.0-36-amd64
      Architecture: x86-64
OS is similar to:

model name      : Common KVM processor
Docker          : false
Virtualization  : kvm
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 15:43:49 up  3:17,  1 user,  load average: 3.69, 3.21, 2.86
CPU threads: 8


*** LIFE CYCLE STATUS ***
Debian Release codenamed 'bullseye' reached its END OF LIFE and needs to be updated to the latest stable release 'trixie' NOW!

*** TIME AND TIMEZONES ***
               Local time: Thu 2025-10-23 15:43:49 CEST
           Universal time: Thu 2025-10-23 13:43:49 UTC
                 RTC time: Thu 2025-10-23 13:43:50
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
root
HOME=/xxxx
GROUPS=xxxx

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev redis bluetooth

A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'!
A root login is not required in most Linux Distributions.
Run 'iobroker fix' or use the system tools to create a user.
*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or r                                                un 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             13G        5.9G        6.1G        0.0K        2.0G        7.8G
Swap:           2.0G          0B        2.0G
Total:           16G        5.9G        8.2G

Active iob-Instances:   63

        13980 M total memory
         5897 M used memory
          885 M active memory
         6401 M inactive memory
         6124 M free memory
          201 M buffer memory
         1756 M swap cache
         2046 M total swap
            0 M used swap
         2046 M free swap

*** top - Table Of Processes  ***
top - 15:43:50 up  3:17,  1 user,  load average: 3.55, 3.19, 2.85
Tasks: 172 total,   3 running, 169 sleeping,   0 stopped,   0 zombie
%Cpu(s): 45.6 us,  7.4 sy,  0.0 ni, 44.1 id,  0.0 wa,  0.0 hi,  2.9 si,  0.0 st
MiB Mem :  13980.9 total,   6124.7 free,   5897.0 used,   1959.2 buff/cache
MiB Swap:   2047.0 total,   2047.0 free,      0.0 used.   7760.9 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  6.9G     0  6.9G   0% /dev
tmpfs          tmpfs     1.4G  536K  1.4G   1% /run
/dev/sda1      ext4       20G   13G  5.8G  69% /
tmpfs          tmpfs     6.9G     0  6.9G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     1.4G     0  1.4G   0% /run/user/0

Messages concerning ext4 filesystem in dmesg:
[Thu Oct 23 12:26:13 2025] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[Thu Oct 23 12:26:13 2025] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

Show mounted filesystems:
TARGET SOURCE    FSTYPE OPTIONS
/      /dev/sda1 ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
2.0G    /var/log
1.9G    /var/log/journal/3f2bf63e5c904f84996f00cc7f0fc49b
1.9G    /var/log/journal
510M    /var/lib

Archived and active journals take up 1.8G in the file system.

/opt/iobroker/backups:
2.4G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
463M    /opt/iobroker/iobroker-data/
331M    /opt/iobroker/iobroker-data/files
52M     /opt/iobroker/iobroker-data/files/javascript.admin
45M     /opt/iobroker/iobroker-data/files/devices.admin/static
45M     /opt/iobroker/iobroker-data/files/devices.admin

The five largest files in iobroker-data are:
50M     /opt/iobroker/iobroker-data/objects.jsonl
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
28M     /opt/iobroker/iobroker-data/objects.json.migrated
28M     /opt/iobroker/iobroker-data/objects.json.bak.migrated

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
tcp

HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting:
tcp

HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting:
tcp
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.5
/usr/bin/node           v20.19.5
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.33.0

nodejs:
  Installed: 20.19.5-1nodesource1
  Candidate: 20.19.5-1nodesource1
  Version table:
 *** 20.19.5-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.19.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     12.22.12~dfsg-1~deb11u7 500
        500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

At least one iobroker host is running.

Objects type: redis
States  type: redis

Hosts:
ioBroker            ioBroker (version: 7.0.7, hostname: ioBroker      , alive, uptime: 6782)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.2
javascript:     8.9.2

nodejs modules from github:     2
+-- iobroker.homepilot20@0.0.72 (git+ssh://git@github.com/homecineplexx/ioBroker.homepilot20.git#3706cca661f6ac97f7b2d0a77043b9a79eb2847f)
+-- iobroker.renault@0.0.22 (git+ssh://git@github.com/TA2k/ioBroker.renault.git#2f50d0fc1fe0ca6ffac426d01434fd357657723a)

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0                                                .0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : ioBroker                                 -  enabled
+ system.adapter.awtrix-light.0           : awtrix-light          : ioBroker                                 -  enabled
+ system.adapter.awtrix-light.1           : awtrix-light          : ioBroker                                 -  enabled
+ system.adapter.awtrix-light.2           : awtrix-light          : ioBroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : ioBroker                                 -  enabled
  system.adapter.cloud.0                  : cloud                 : ioBroker                                 - disabled
+ system.adapter.countdown.0              : countdown             : ioBroker                                 -  enabled
+ system.adapter.device-watcher.0         : device-watcher        : ioBroker                                 -  enabled
  system.adapter.devices.0                : devices               : ioBroker                                 -  enabled
  system.adapter.discovery.0              : discovery             : ioBroker                                 - disabled
  system.adapter.drops-weather.0          : drops-weather         : ioBroker                                 - disabled
  system.adapter.dwd.0                    : dwd                   : ioBroker                                 -  enabled
  system.adapter.email.0                  : email                 : ioBroker                                 - disabled
+ system.adapter.energiefluss.0           : energiefluss          : ioBroker                                 -  enabled
+ system.adapter.energiefluss.1           : energiefluss          : ioBroker                                 -  enabled
+ system.adapter.energiefluss.2           : energiefluss          : ioBroker                                 -  enabled
+ system.adapter.espresense.0             : espresense            : ioBroker                                 -  enabled
  system.adapter.flot.0                   : flot                  : ioBroker                                 - disabled
  system.adapter.fritzdect.0              : fritzdect             : ioBroker                                 - disabled
  system.adapter.heizoel24-mex.0          : heizoel24-mex         : ioBroker                                 -  enabled
+ system.adapter.history.0                : history               : ioBroker                                 -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : ioBroker                                 -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : ioBroker                                 -  enabled, port: xxxx
  system.adapter.homeconnect.0            : homeconnect           : ioBroker                                 - disabled
+ system.adapter.homepilot20.0            : homepilot20           : ioBroker                                 -  enabled
+ system.adapter.hue.0                    : hue                   : ioBroker                                 -  enabled, port: xxx
  system.adapter.hue.1                    : hue                   : ioBroker                                 - disabled, port: xxx
+ system.adapter.hue.2                    : hue                   : ioBroker                                 -  enabled, port: xxx
+  system.adapter.ical.0                   : ical                  : ioBroker                                 -  enabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : ioBroker                                 - disabled
  system.adapter.icons-material-png.0     : icons-material-png    : ioBroker                                 - disabled
  system.adapter.icons-material-svg.0     : icons-material-svg    : ioBroker                                 - disabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : ioBroker                                 - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : ioBroker                                 - disabled
+ system.adapter.influxdb.0               : influxdb              : ioBroker                                 -  enabled, port: xxxx
+ system.adapter.info.0                   : info                  : ioBroker                                 -  enabled
+ system.adapter.innogy-smarthome.0       : innogy-smarthome      : ioBroker                                 -  enabled
+ system.adapter.iot.0                    : iot                   : ioBroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : ioBroker                                 -  enabled
+ system.adapter.logparser.0              : logparser             : ioBroker                                 -  enabled
  system.adapter.lovelace.0               : lovelace              : ioBroker                                 - disabled, port: xxxx, bind: 0.0.0.0                                                , run as: admin
  system.adapter.matter.0                 : matter                : ioBroker                                 - disabled
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.1          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.2          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.3          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                               
+ system.adapter.mqtt.1                   : mqtt                  : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                            
  system.adapter.nina.0                   : nina                  : ioBroker                                 - disabled
+ system.adapter.node-red.0               : node-red              : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                +  system.adapter.octoprint.0              : octoprint             : ioBroker                                 - disabled
+ system.adapter.octoprint.1              : octoprint             : ioBroker                                 -  enabled
  system.adapter.openweathermap.0         : openweathermap        : ioBroker                                 -  enabled
+ system.adapter.owntracks.0              : owntracks             : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                               
  system.adapter.places.0                 : places                : ioBroker                                 - disabled
+ system.adapter.pushover.0               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pushover.1               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pushover.2               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pushover.3               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pushover.4               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pushover.5               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pushover.6               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pushover.7               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pushover.8               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : ioBroker                                 -  enabled
+ system.adapter.radar2.0                 : radar2                : ioBroker                                 -  enabled
+ system.adapter.renault.0                : renault               : ioBroker                                 -  enabled
+ system.adapter.robonect.0               : robonect              : ioBroker                                 -  enabled
  system.adapter.robonect.1               : robonect              : ioBroker                                 - disabled
+ system.adapter.s7.0                     : s7                    : ioBroker                                 -  enabled
+ system.adapter.s7.1                     : s7                    : ioBroker                                 -  enabled
+ system.adapter.samsung_tizen.0          : samsung_tizen         : ioBroker                                 - disabled, port: xxxx
+ system.adapter.shelly.0                 : shelly                : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                
+ system.adapter.shelly.1                 : shelly                : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                
+ system.adapter.smartgarden.0            : smartgarden           : ioBroker                                 -  enabled
+ system.adapter.solax.0                  : solax                 : ioBroker                                 -  enabled
+ system.adapter.sonoff.0                 : sonoff                : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                + system.adapter.sun2000.0                : sun2000               : ioBroker                                 -  enabled, port: xxxx
+ system.adapter.telegram.0               : telegram              : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                
+ system.adapter.trashschedule.0          : trashschedule         : ioBroker                                 -  enabled
  system.adapter.tuya.0                   : tuya                  : ioBroker                                 - disabled
  system.adapter.vis-hqwidgets.0          : vis                   : ioBroker                                 - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : ioBroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis                   : ioBroker                                 - disabled
  system.adapter.vis-map.0                : vis-map               : ioBroker                                 -  enabled
  system.adapter.vis-materialdesign.0     : vis                   : ioBroker                                 - disabled
  system.adapter.vis-metro.0              : vis                   : ioBroker                                 - disabled
  system.adapter.vis.0                    : vis                   : ioBroker                                 -  enabled
+ system.adapter.weather-warnings.0       : weather-warnings      : ioBroker                                 -  enabled
+ system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8082, bind: 0.0.0                                                .0, run as: admin
+ system.adapter.wled.0                   : wled                  : ioBroker                                 -  enabled
+ system.adapter.zigbee.0                 : zigbee                : ioBroker                                 -  enabled, port: tcp://x.x.x.x                                                
+ system.adapter.zigbee.1                 : zigbee                : ioBroker                                 -  enabled, port: tcp://x.x.x.x                                               
  system.adapter.zigbee.2                 : zigbee                : ioBroker                                 - disabled, port: tcp://x.x.x.x                                               

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0                                               , run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : ioBroker                                 -  enabled, port: xxx
+ system.adapter.hue.0                    : hue                   : ioBroker                                 -  enabled, port: xxx
+ system.adapter.hue.2                    : hue                   : ioBroker                                 -  enabled, port: xxx
+ system.adapter.influxdb.0               : influxdb              : ioBroker                                 -  enabled, port: xxxx
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.1          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.2          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.3          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                
+ system.adapter.mqtt.1                   : mqtt                  : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                              
+ system.adapter.node-red.0               : node-red              : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                
+ system.adapter.owntracks.0              : owntracks             : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                
+ system.adapter.shelly.0                 : shelly                : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                
+ system.adapter.shelly.1                 : shelly                : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                
+ system.adapter.sonoff.0                 : sonoff                : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                               
+ system.adapter.sun2000.0                : sun2000               : ioBroker                                 -  enabled, port: xxx
+ system.adapter.telegram.0               : telegram              : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                               
+ system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: xxxx, bind: 0.0.0.0                                                .0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : ioBroker                                 -  enabled, port: tcp://x.x.x.x                                                
+ system.adapter.zigbee.1                 : zigbee                : ioBroker                                 -  enabled, port: tcp://x.x.x.x                                               
ioBroker-Repositories
┌─────────┬───────────┬─────────────────────────────────────────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name      │ url                                                                                         │ auto upgrade │
├─────────┼───────────┼─────────────────────────────────────────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'sources' │ 'conf/sources-dist.json'                                                                    │ false        │
│ 1       │ 'online'  │ 'https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json' │ false        │
│ 2       │ 'stable'  │ 'http://download.iobroker.net/sources-dist.json'                                            │ false        │
│ 3       │ 'beta'    │ 'http://download.iobroker.net/sources-dist-latest.json'                                     │ false        │
└─────────┴───────────┴─────────────────────────────────────────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.2    , installed 7.7.2
Adapter    "alexa2"       : 3.27.3   , installed 3.27.3
Adapter    "awtrix-light" : 2.0.0    , installed 2.0.0
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "countdown"    : 3.0.0    , installed 3.0.0
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "device-watcher": 2.13.1  , installed 2.13.1
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "drops-weather": 1.2.7    , installed 1.2.7
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "espresense"   : 0.6.3    , installed 0.6.3
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.6.2    , installed 2.6.2
Adapter    "heizoel24-mex": 1.5.0    , installed 1.5.0
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "homeconnect"  : 1.4.3    , installed 1.5.1
Adapter    "hue"          : 3.16.2   , installed 3.16.2
Adapter    "ical"         : 1.17.0   , installed 1.17.0
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "innogy-smarthome": 1.2.6 , installed 1.2.6
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "logparser"    : 2.4.0    , installed 2.4.0
Adapter    "lovelace"     : 5.0.1    , installed 5.0.1
Adapter    "matter"       : 0.5.5    , installed 0.5.5
Adapter    "mihome-vacuum": 5.2.0    , installed 5.3.0
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "octoprint"    : 5.1.0    , installed 5.1.0
Adapter    "openweathermap": 1.1.2   , installed 1.1.2
Adapter    "owntracks"    : 1.1.0    , installed 1.1.0
Adapter    "places"       : 1.3.0    , installed 1.3.0
Adapter    "pushover"     : 4.1.0    , installed 4.1.0
Adapter    "pvforecast"   : 5.0.0    , installed 5.0.0
Adapter    "radar2"       : 2.4.0    , installed 2.4.0
Adapter    "robonect"     : 1.4.2    , installed 1.4.2
Adapter    "s7"           : 1.5.0    , installed 1.5.0
Adapter    "samsung_tizen": 1.1.0    , installed 1.1.0
Adapter    "shelly"       : 10.2.0   , installed 10.2.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartgarden"  : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "solax"        : 0.9.20   , installed 0.9.20
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "sun2000"      : 2.1.0    , installed 2.3.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-map"      : 1.1.2    , installed 1.1.2
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.12   , installed 2.5.12
Adapter    "weather-warnings": 0.8.0 , installed 0.8.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "wled"         : 0.7.2    , installed 0.7.3
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee"       : 3.1.5    , installed 3.1.5

Objects and States
Please stand by - This may take a while
Objects:        38678
States:         30075

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0


*** Log File - Last 25 Lines ***

2025-10-23 15:41:41.069  - info: host.ioBroker iobroker gyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64
2025-10-23 15:41:41.286  - info: host.ioBroker iobroker gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
2025-10-23 15:41:41.611  - info: host.ioBroker iobroker gyp ERR! UNCAUGHT EXCEPTION
2025-10-23 15:41:41.612  - info: host.ioBroker iobroker gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack     at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack     at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack     at FSReqCallback.oncomplete (node:fs:188:23)
2025-10-23 15:41:41.613  - info: host.ioBroker iobroker gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/usocketgyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
2025-10-23 15:41:41.633  - info: host.ioBroker iobroker > classic-level@3.0.0 install> node-gyp-build
2025-10-23 15:41:41.775  - info: openweathermap.0 (18438) starting. Version 1.1.2 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v20.19.5, js-controller: 7.0.7
2025-10-23 15:41:42.092  - info: host.ioBroker iobroker gyp info it worked if it ends with ok
2025-10-23 15:41:42.094  - info: host.ioBroker iobroker gyp info using node-gyp@7.1.2
2025-10-23 15:41:42.095  - info: host.ioBroker iobroker gyp info using node@20.19.5 | linux | x64
2025-10-23 15:41:42.254  - info: host.ioBroker iobroker gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
2025-10-23 15:41:42.647  - info: host.ioBroker iobroker gyp ERR! UNCAUGHT EXCEPTION
2025-10-23 15:41:42.649  - info: host.ioBroker iobroker gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack     at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack     at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9
2025-10-23 15:41:42.650  - info: host.ioBroker iobroker gyp ERR! stack     at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
2025-10-23 15:41:42.651  - info: host.ioBroker iobroker gyp ERR! cwd /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui/node_modules/classic-levelgyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
2025-10-23 15:41:43.158  - info: host.ioBroker iobroker npm error code 7npm error path /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui/node_modules/classic-levelnpm error command failednpm error command sh -c node-gyp-build
2025-10-23 15:41:43.166  - info: host.ioBroker iobroker npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-23T13_41_29_823Z-debug-0.log
2025-10-23 15:41:43.214  - error: host.ioBroker iobroker npm warn deprecated npmlog@4.1.2: This package is no longer supported.npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.npm warn deprecated gauge@2.7.4: This package is no longer supported.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack     at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack     at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack     at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/raw-socketgyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack     at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack     at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack     at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/usocketgyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@20.19.5 | linux | x64gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack     at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack     at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack     at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 5.10.0-36-amd64gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui/node_modules/classic-levelgyp ERR! node -v v20.19.5gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.npm error code 7npm error path /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui/node_modules/classic-levelnpm error command failednpm error command sh -c node-gyp-buildnpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-23T13_41_29_823Z-debug-0.log
2025-10-23 15:41:43.216  - error: host.ioBroker iobroker host.ioBroker Cannot install iobroker.nspanel-lovelace-ui@latest: 7
2025-10-23 15:41:44.240  - info: host.ioBroker iobroker exit 25
2025-10-23 15:42:09.382  - info: owntracks.0 (9177) Client [S24Chris] closed
2025-10-23 15:42:15.150  - info: openweathermap.0 (18438) Terminated (NO_ERROR): Without reason
2025-10-23 15:42:15.675  - info: host.ioBroker instance system.adapter.openweathermap.0 having pid 18438 terminated with code 0 (NO_ERROR)
2025-10-23 15:42:39.582  - info: owntracks.0 (9177) Client [S24Chris] connected
2025-10-23 15:44:05.014  - info: javascript.0 (10111) script.js.E-Auto.Dacia_Spring.GPS_Test_Openstreetmap: null

============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@chris_71
Bring das auf Debian 13
Log dich NIE als root ein.
Setz das BootTarget auf 'multi-user'.
Verwende nodejs@22
Veränder die Ausgabe nicht.
Räum die ioBroker-Repositories auf.

Cannot install iobroker.nspanel-lovelace-ui@latest

Vermutlich wegen zu alter python-Version.

[Chris_71]

@thomas-braun

Nach der Deinstallation von 2 alten NPM Modulen (vom Radar2 Adapter V1.x) konnte der Adapter ohne Fehlermeldung installiert werden.

[Thomas Braun]

@chris_71

Der Rest der Analyse bleibt aber dennoch gültig.

[ticaki]

Da ist ein Fehler drin, der verhindert das man neue Panels anlernt - sry wird behoben.

[ticaki]

0.6.8 (2025-10-24)

• (ticaki) Error during conversion to fetch prevented adding of panels. Fixed.

[ilovegym]

@chris_71 sagte in Betatest NSPanel-lovelace-ui v0.6.x:

@thomas-braun

Nach der Deinstallation von 2 alten NPM Modulen (vom Radar2 Adapter V1.x) konnte der Adapter ohne Fehlermeldung installiert werden.

Tu dir aber selbst n gefallen, und mach n Backup, setz das System am besten gleich mit dem aktuellen Trixie neu auf, damit du wieder uptodate bist. So schleppst du dir nur den Murks mit rum.. wird ja nicht besser und irgendwann geht dann gar nix mehr..

[Max_yeah]

Ich bekomme mein panel einfach nicht zum laufen. Ich hab schon mehrmals alles raus gelöscht (Objecte, Scripte, In der instanz) und neu angelegt. (v0.6.8)

Beim Neustart der Instanz bekomme ich aktuell diese Meldungen:

nspanel-lovelace-ui.0
2025-10-24 21:13:35.627	info	[NSPanel_Badezimmer] Setting panel to offline until first message!

mqtt.0
2025-10-24 21:13:35.626	info	Client [iobroker_a350717b-2ee5-45f8-8f61-d6db59dcf564] subscribes on "SmartHome/NSPanel_Badezimmer/stat/#" with regex /^mqtt\.0\.SmartHome\.NSPanel_Badezimmer\.stat\..*/

mqtt.0
2025-10-24 21:13:35.625	info	Client [iobroker_a350717b-2ee5-45f8-8f61-d6db59dcf564] subscribes on "SmartHome/NSPanel_Badezimmer/stat/#" with regex /^SmartHome\.NSPanel_Badezimmer\.stat\..*/

mqtt.0
2025-10-24 21:13:35.618	info	Client [iobroker_a350717b-2ee5-45f8-8f61-d6db59dcf564] subscribes on "SmartHome/NSPanel_Badezimmer/tele/#" with regex /^mqtt\.0\.SmartHome\.NSPanel_Badezimmer\.tele\..*/

mqtt.0
2025-10-24 21:13:35.617	info	Client [iobroker_a350717b-2ee5-45f8-8f61-d6db59dcf564] subscribes on "SmartHome/NSPanel_Badezimmer/tele/#" with regex /^SmartHome\.NSPanel_Badezimmer\.tele\..*/

mqtt.0
2025-10-24 21:13:35.613	info	Client [iobroker_a350717b-2ee5-45f8-8f61-d6db59dcf564] subscribes on "mqtt.0.SmartHome.NSPanel_Badezimmer.stat.RESULT"

mqtt.0
2025-10-24 21:13:09.829	info	Client [NSPanel_Badezimmer] publishOnSubscribe send all known states

mqtt.0
2025-10-24 21:13:09.629	info	Client [NSPanel_Badezimmer] subscribes on "SmartHome/NSPanel_Badezimmer/cmnd/#" with regex /^mqtt\.0\.SmartHome\.NSPanel_Badezimmer\.cmnd\..*/

mqtt.0
2025-10-24 21:13:09.628	info	Client [NSPanel_Badezimmer] subscribes on "SmartHome/NSPanel_Badezimmer/cmnd/#" with regex /^SmartHome\.NSPanel_Badezimmer\.cmnd\..*/

mqtt.0
2025-10-24 21:13:09.578	info	Client [NSPanel_Badezimmer] connected with secret 1761333189577_4195

mqtt.0
2025-10-24 21:13:04.494	info	Client [NSPanel_Badezimmer] connection closed: closed

mqtt.0
2025-10-24 21:13:03.531	info	Client [iobroker_a350717b-2ee5-45f8-8f61-d6db59dcf564] connected with secret 1761333183530_4548

nspanel-lovelace-ui.0
2025-10-24 21:13:02.095	info	Detailed configuration checks are suppressed here. Full validation output is only shown when the configuration script is sent to the adapter.

nspanel-lovelace-ui.0
2025-10-24 21:13:02.094	info	Found 1 script configs for topics: SmartHome/NSPanel_Badezimmer

nspanel-lovelace-ui.0
2025-10-24 21:13:02.094	info	Configured panels: name#topic -> [NSPanel_Badezimmer#SmartHome/NSPanel_Badezimmer]

nspanel-lovelace-ui.0
2025-10-24 21:13:02.022	info	starting. Version 0.6.8 (non-npm: ticaki/ioBroker.nspanel-lovelace-ui) in /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui, node: v20.19.2, js-controller: 7.0.6

In der Instanz wird wird das panel als offline angezeigt:

[muuulle]

@max_yeah
Drück einmal eine Taste auf dem Panel. Das hilf bei mir in der selben Situation 😀

[Max_yeah]

@muuulle Danke, nur leider tut sich da nix.

[TT-Tom]

@max_yeah

gehe mal bitte in die Tasmota Konsole, starte das panel neu und zeige mal das Log

zeige mal die MQTT Einstellungen vom Adapter

[ticaki]

@max_yeah

Das löschen von allem sollte NIE nötig sein - und danach läufts i.d.R. erstmal garnicht mehr, das deinstallieren und reinstallieren vom Adapter nur wenn was extrem daneben läuft. Ich hab den noch nie reinstalliert(also löschen vom Adapter und wieder installieren) oder große Zweige an States gelöscht und teste fast jedes Update erst bei mir.

Um zu helfen fehlen mir da ein paar grundsätzliche Dinge - da das mqtt.0 schon mal danach aussieht als wenn du nicht den Adapter eigenen Mqtt-Server benutzt wäre ein Bild der mqtt Konfig(vom Server und von diesem Adapter) und ein Bild der NSPanel-Einstellungen hilfreich.