Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie'
-
Ich hab das hier gepostet weil ich vermute das die Meldung jetzt kam nachdem ich das Update vor ein paar Tagen auf "Trixie" bzw das Nodejs update auf die 22.18 gemacht hatte. Falls das damit nix zu tun hat dann einfach löschen oder wenns woanders hion passen würde verschieben
Gerade eben wollte ich per sudo apt update nachschauen ob es neue Updates gibt da kam folgende Meldung
Was wäre denn da jetzt zu tun.
pi@Raspberrypi5:~ $ sudo apt update OK:1 http://deb.debian.org/debian trixie InRelease OK:2 http://deb.debian.org/debian-security trixie-security InRelease OK:3 http://archive.raspberrypi.com/debian trixie InRelease OK:4 http://deb.debian.org/debian trixie-updates InRelease OK:5 https://repos.influxdata.com/debian stable InRelease Holen:6 https://apt.grafana.com stable InRelease [7.661 B] Fehl:6 https://apt.grafana.com stable InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z OK:7 https://deb.nodesource.com/node_22.x nodistro InRelease Alle Pakete sind aktuell. Warnung: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. OpenPGP-Signaturüberprüfung fehlgeschlagen: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z Warnung: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Warnung: Fehlschlag beim Holen von https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z Warnung: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt.Anbei noch ein aktuelles iob diag
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: Raspberrypi5 Icon name: computer Kernel: Linux 6.12.34+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 01:39:28 up 2 days, 12:08, 1 user, load average: 0.33, 0.22, 0.25 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2025-08-25 01:39:28 CEST Universal time: Sun 2025-08-24 23:39:28 UTC RTC time: Sun 2025-08-24 23:39:28 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/pi GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 4.4G 1.0G 18M 3.3G 4.1G Swap: 209M 207M 1.9M Total: 8.7G 4.6G 1.0G Active iob-Instances: 33 8063 M total memory 4154 M used memory 3785 M active memory 2753 M inactive memory 965 M free memory 141 M buffer memory 2999 M swap cache 199 M total swap 198 M used swap 1 M free swap *** top - Table Of Processes *** top - 01:39:28 up 2 days, 12:08, 1 user, load average: 0.33, 0.22, 0.25 Tasks: 243 total, 1 running, 242 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 2.4 sy, 0.0 ni, 97.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.1 total, 962.7 free, 4155.5 used, 3142.9 buff/cache MiB Swap: 200.0 total, 1.8 free, 198.2 used. 3907.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 16M 1.6G 1% /run /dev/sda2 ext4 59G 23G 33G 41% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 4.0G 11M 4.0G 1% /tmp tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service /dev/sda1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 807M 32K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Aug 22 13:31:20 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:A3:25:8A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=beeda195-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Fri Aug 22 13:31:25 2025] EXT4-fs (sda2): mounted filesystem 6835594d-a5f3-459f-a244-318060e7e0ab ro with ordered data mode. Quota mode: none. [Fri Aug 22 13:31:26 2025] EXT4-fs (sda2): re-mounted 6835594d-a5f3-459f-a244-318060e7e0ab r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.1G /var/ 1.3G /var/log/journal/02a43974e4004c17afbe02a71ed8236e 1.3G /var/log/journal 1.3G /var/log 1.3G /var/lib Archived and active journals take up 1.2G in the file system. /opt/iobroker/backups: 3.3G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 501M /opt/iobroker/iobroker-data/ 160M /opt/iobroker/iobroker-data/files 109M /opt/iobroker/iobroker-data/backup-objects 72M /opt/iobroker/iobroker-data/node-red 71M /opt/iobroker/iobroker-data/node-red/node_modules The five largest files in iobroker-data are: 40M /opt/iobroker/iobroker-data/objects.jsonl 13M /opt/iobroker/iobroker-data/states.jsonl 8.8M /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CjzUbllv.js 8.6M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 6.2M /opt/iobroker/iobroker-data/jarvis/0/jarvis.0.devices.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.18.0 /usr/bin/node v22.18.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.33.0 nodejs: Installed: 22.18.0-1nodesource1 Candidate: 22.18.0-1nodesource1 Version table: *** 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspberrypi5 Raspberrypi5 (version: 7.0.7, hostname: Raspberrypi5 , alive, uptime: 216475) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 9.0.11 nodejs modules from github: 5 +-- iobroker.influxdb@4.0.3 (git+ssh://git@github.com/ioBroker/ioBroker.influxdb.git#28ac2b78843928094d8a6fea3a43a45cde1cc19d) +-- iobroker.jarvis@3.2.0-rc.17 (git+ssh://git@github.com/Zefau/ioBroker.jarvis.git#65370bd2ad4617722447bcff04ba4dc6429bed9b) +-- iobroker.nspanel-lovelace-ui@0.2.4 (git+ssh://git@github.com/ticaki/ioBroker.nspanel-lovelace-ui.git#dcbe5f9e78b9f2b992650058cd43c45843b6ddff) +-- iobroker.pirate-weather@0.2.0 (git+ssh://git@github.com/ticaki/ioBroker.pirate-weather.git#5afe302853331ec86024d6aa8b3f1aefd85f7c03) +-- iobroker.rpi2@2.4.0 (git+ssh://git@github.com/Grothesk242/ioBroker.rpi2.git#c87e9539d89bac8f4d19b266679bcb78ed554f1d) Adapter State + system.adapter.admin.0 : admin : Raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : Raspberrypi5 - enabled system.adapter.alias-manager.0 : alias-manager : Raspberrypi5 - enabled + system.adapter.alpha-ess.0 : alpha-ess : Raspberrypi5 - enabled + system.adapter.backitup.0 : backitup : Raspberrypi5 - enabled + system.adapter.cloud.0 : cloud : Raspberrypi5 - enabled system.adapter.devices.0 : devices : Raspberrypi5 - enabled + system.adapter.discovery.0 : discovery : Raspberrypi5 - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: Raspberrypi5 - enabled system.adapter.energiefluss-erweitert.1 : energiefluss-erweitert: Raspberrypi5 - disabled + system.adapter.energiefluss-erweitert.2 : energiefluss-erweitert: Raspberrypi5 - enabled system.adapter.energiefluss-erweitert.3 : energiefluss-erweitert: Raspberrypi5 - disabled + system.adapter.fritzdect.0 : fritzdect : Raspberrypi5 - enabled + system.adapter.hm-rega.0 : hm-rega : Raspberrypi5 - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspberrypi5 - enabled, port: 18701 + system.adapter.hm-rpc.1 : hm-rpc : Raspberrypi5 - enabled, port: 18701 + system.adapter.homeconnect.0 : homeconnect : Raspberrypi5 - enabled + system.adapter.hue.0 : hue : Raspberrypi5 - enabled, port: 80 system.adapter.ical.0 : ical : Raspberrypi5 - enabled system.adapter.ical.1 : ical : Raspberrypi5 - enabled + system.adapter.influxdb.0 : influxdb : Raspberrypi5 - enabled, port: 8086 system.adapter.iot.0 : iot : Raspberrypi5 - disabled + system.adapter.jarvis.0 : jarvis : Raspberrypi5 - enabled + system.adapter.javascript.0 : javascript : Raspberrypi5 - enabled + system.adapter.matter.0 : matter : Raspberrypi5 - enabled + system.adapter.modbus.0 : modbus : Raspberrypi5 - enabled + system.adapter.mqtt.0 : mqtt : Raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : Raspberrypi5 - enabled + system.adapter.nspanel-lovelace-ui.0 : nspanel-lovelace-ui : Raspberrypi5 - enabled + system.adapter.nuki.0 : nuki : Raspberrypi5 - enabled system.adapter.openweathermap.0 : openweathermap : Raspberrypi5 - enabled + system.adapter.ping.0 : ping : Raspberrypi5 - enabled + system.adapter.pirate-weather.0 : pirate-weather : Raspberrypi5 - enabled + system.adapter.rpi2.0 : rpi2 : Raspberrypi5 - enabled + system.adapter.simple-api.0 : simple-api : Raspberrypi5 - enabled, port: 8087, bind: 192.168.178.82, run as: admin + system.adapter.socketio.0 : socketio : Raspberrypi5 - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : Raspberrypi5 - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : Raspberrypi5 - enabled + system.adapter.web.0 : web : Raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspberrypi5 - enabled, port: 18701 + system.adapter.hm-rpc.1 : hm-rpc : Raspberrypi5 - enabled, port: 18701 + system.adapter.hue.0 : hue : Raspberrypi5 - enabled, port: 80 + system.adapter.influxdb.0 : influxdb : Raspberrypi5 - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspberrypi5 - enabled, port: 8087, bind: 192.168.178.82, run as: admin + system.adapter.socketio.0 : socketio : Raspberrypi5 - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : Raspberrypi5 - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alexa2" : 3.27.3 , installed 3.27.3 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "alpha-ess" : 3.0.1 , installed 3.0.1 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "energiefluss-erweitert": 0.7.8, installed 0.7.8 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "influxdb" : 4.0.2 , installed 4.0.3 Adapter "iot" : 3.6.0 , installed 3.6.0 Adapter "jarvis" : 3.2.0-rc.5, installed 3.2.0-rc.17 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "matter" : 0.5.2 , installed 0.5.2 Adapter "modbus" : 6.4.0 , installed 6.4.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "net-tools" : 1.2.0 , installed 1.2.0 Adapter "nuki" : 2.0.0 , installed 2.0.0 Adapter "openweathermap": 1.4.0 , installed 1.4.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "web" : 7.0.9 , installed 7.0.9 Adapter "ws" : 3.0.19 , installed 3.0.19 Objects and States Please stand by - This may take a while Objects: 14508 States: 14163 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian-security trixie-security InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Get:5 https://apt.grafana.com stable InRelease [7661 B] Hit:6 https://repos.influxdata.com/debian stable InRelease Err:5 https://apt.grafana.com stable InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.82:18701 0.0.0.0:* LISTEN 1001 10438 1488/io.hm-rpc.0 tcp 0 0 192.168.178.82:18702 0.0.0.0:* LISTEN 1001 12321 1505/io.hm-rpc.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 106 7481 861/mosquitto tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 226331 16034/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8253 834/sshd: /usr/sbin tcp 0 0 192.168.178.82:8087 0.0.0.0:* LISTEN 1001 15114 2308/io.simple-api. tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 7690 1187/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 7697 1187/iobroker.js-co tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 7638 1145/exim4 tcp6 0 0 ::1:25 :::* LISTEN 0 7639 1145/exim4 tcp6 0 0 :::1883 :::* LISTEN 106 7482 861/mosquitto tcp6 0 0 :::8400 :::* LISTEN 1001 3524004 268297/io.jarvis.0 tcp6 0 0 :::22 :::* LISTEN 0 8255 834/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 10004 1229/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 16426 2401/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 15866 2367/io.socketio.0 tcp6 0 0 :::8086 :::* LISTEN 999 8478 853/influxd tcp6 0 0 :::3000 :::* LISTEN 107 9965 1186/grafana udp 0 0 0.0.0.0:48124 0.0.0.0:* 1001 15796 2192/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 14081 2192/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 14073 2192/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 1797 648/avahi-daemon: r udp 0 0 0.0.0.0:5541 0.0.0.0:* 1001 14090 2192/io.matter.0 udp 0 0 0.0.0.0:58952 0.0.0.0:* 104 1799 648/avahi-daemon: r udp6 0 0 :::48124 :::* 1001 15795 2192/io.matter.0 udp6 0 0 fe80::f05b:9255:16f:546 :::* 0 9894 735/NetworkManager udp6 0 0 fe80::38be:beb2:fe6:546 :::* 0 8329 735/NetworkManager udp6 0 0 :::5353 :::* 1001 14084 2192/io.matter.0 udp6 0 0 :::5353 :::* 1001 14076 2192/io.matter.0 udp6 0 0 :::5353 :::* 104 1798 648/avahi-daemon: r udp6 0 0 :::5541 :::* 1001 14089 2192/io.matter.0 udp6 0 0 :::34804 :::* 104 1800 648/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-08-25 01:39:40.006 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:39:40.009 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:39:40.014 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText] 2025-08-25 01:39:40.016 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText] 2025-08-25 01:39:45.004 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:39:45.009 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:39:50.003 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:39:50.006 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:39:50.058 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText] 2025-08-25 01:39:50.100 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText] 2025-08-25 01:39:53.009 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:39:53.052 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:39:53.053 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:39:55.003 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:39:55.047 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:40:00.004 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:40:00.010 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:40:00.010 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:40:00.010 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:40:00.019 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:40:00.026 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:40:00.031 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText] 2025-08-25 01:40:00.035 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText] 2025-08-25 01:40:05.005 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:40:05.010 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText]============ Mark until here for C&P =============
iob diag has finished.
Ich hab jetzt mal Chat GPT gefragt und hier wurde mir folgendes angeboten was ich auch durchgeführt habe. ich hatte mir im Vorfeld eine Sicherungskopie meiner Festplatte gemacht so das ich jederzeit auf das vorran gegangene System wieder zurück kann wenn was schief läuft. Scheint aber zu funktionieren. Fehler ist zumindest weg.
1. Alte Datei/Keyreferenzen löschen Falls du noch eine alte Repository-Datei hast, die auf den abgelaufenen Key verweist, am besten löschen: sudo rm /etc/apt/sources.list.d/grafana.list 2. Neuen Key herunterladen und sicher ablegen sudo mkdir -p /usr/share/keyrings sudo wget -q -O /usr/share/keyrings/grafana.gpg https://apt.grafana.com/gpg.key 3. Repository mit neuem Key einrichten echo "deb [signed-by=/usr/share/keyrings/grafana.gpg] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list 4. Update durchführen sudo apt updateIch hoffe das das so in Ordnung ist.
Nach einem weiteren iob diag hatte ich wieder eine Meldung
*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * iobroker.service loaded failed failed ioBroker Server Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed.Die aber dann durch einen iob fix und einen reboot wieder verschwunden ist.
-
@teletapi sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Warnung: Fehlschlag beim Holen von https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z
Der Schlüssel muss erneuert werden, deiner ist am 23. August abgelaufen. Ich mache das immer danach:
https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind
Hier werden andere Verzeichnisse als bei SchrottJiPiehTieh verwendet. Kann man sich drüber streiten, was richtiger/besser ist, die aktuelle Vorgabe seitens Debian ist aber
/etc/apt/keyrings/ -
@thomas-braun kann ich das so lassen oder sollte ich das ändern damit das für die Zukunft evtl. besser ist.?
-
Nach der reinen Lehre gehören 'lose' Schlüssel nach /etc/apt/keyrings, das Verzeichnis /usr/share/keyrings ist eigentlich für Schlüssel vorgesehen, die mit Paketen gleich mitinstalliert werden.
Und auch auf der grafana-Seite wird /etc/apt/keyrings verwendet:
https://grafana.com/docs/grafana/latest/setup-grafana/installation/debian/
Halte ich ohnehin für die verlässlichere Quelle als irgendson ÄihEi-Gedönse. Kommt viel zu oft höchstens halbrichtiges bei herum. Wie man hier wieder sieht.
-
@thomas-braun ich hab es jetzt hoffentlich gerade gebogen, danke
-
Vielen Dank für die sehr gute Anleitung!
Ich habe soeben mein System auf Debian 13 gehievt, und ich sehe z. Zt. keine Probleme.Dennoch habe ich 2 Fragen, weil mir beim 1. Versuch etwas passiert ist, womit mein Debmatic gelöscht wurde (ich wurde zwar gefragt, aber ich habe dennoch mit dem Kopf genickt ;-(
1. Beim folgenden Punkt wird Debmatic zum Löschen angeboten:
sudo apt purge '~o' Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: appstream lighttpd-mod-deflate python3-jaraco.context ca-certificates-java lighttpd-mod-openssl python3-jaraco.functools detect-radio-module lighttpd-modules-lua python3-jwt gir1.2-packagekitglib-1.0 lua-bit32 python3-lazr.restfulclient ipcalc lua-filesystem python3-lazr.uri java-common lua-socket python3-more-itertools libappstream5 packagekit python3-oauthlib libgstreamer1.0-0 packagekit-tools python3-pkg-resources liblcms2-2 pigpio-tools python3-pyparsing liblua5.4-0 python3-autocommand python3-typeguard libpackagekit-glib2-18 python3-blinker python3-typing-extensions libstemmer0d python3-dbus python3-wadllib libxmlb2 python3-httplib2 spawn-fcgi lighttpd python3-inflect wait-sysfs-notify Verwenden Sie »sudo apt autoremove«, um sie zu entfernen. ENTFERNE: debmatic* libpigpio1* libunistring2* python3-software-properties* libapt-pkg6.0* libpigpiod-if-dev* openjdk-17-jre-headless* raspberrypi-kernel-headers* libcups2* libpigpiod-if1* pigpio* raspi-gpio* libpigpio-dev* libpigpiod-if2-1* pigpiod* software-properties-common* Zusammenfassung: Aktualisiere: 0, Installiere: 0, Entferne: 16, Aktualisiere nicht: 0 Freigegebener Platz: 266 MB Fortfahren? [J/n] n Abbruch.Das hatte ich beim 1. Versuch auch dämlicherweise mit J beantwortet. Ich konnte Debmatic danach auch nicht mehr manuell installieren, da irgendwie etwas in den Kernel-Headern fehlen würde.(Meldung habe ich leider nicht mehr)
Jetzt, beim 2. Mal, habe ich auf das Löschen verzichtet.
Frage: Muss ich mir deshalb Gedanken machen?2. Frage: Beim Update bekomme ich eine Warnung bzgl. der Debmatic-Signatur.
Wie kann ich das beheben?OK:1 https://apt.debmatic.de/debmatic stable InRelease OK:2 http://archive.raspberrypi.com/debian trixie InRelease OK:3 https://apt.grafana.com stable InRelease OK:4 http://deb.debian.org/debian trixie InRelease OK:5 http://deb.debian.org/debian-security trixie-security InRelease OK:6 https://repos.influxdata.com/debian stable InRelease OK:7 http://deb.debian.org/debian trixie-updates InRelease OK:8 https://deb.nodesource.com/node_22.x nodistro InRelease Alle Pakete sind aktuell. Warnung: https://apt.debmatic.de/debmatic/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details Warnung: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for detailsDas war mein System VOR dem Update:
```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: iobroker Icon name: computer Kernel: Linux 6.12.34+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 17:28:16 up 5 min, 2 users, load average: 1.40, 1.35, 0.68 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2025-08-29 17:28:16 CEST Universal time: Fri 2025-08-29 15:28:16 UTC RTC time: Fri 2025-08-29 15:28:16 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 3.9G 3.0G 6.0M 1.6G 4.6G Swap: 209M 0B 209M Total: 8.7G 3.9G 3.2G Active iob-Instances: 36 8063 M total memory 3722 M used memory 3826 M active memory 909 M inactive memory 2889 M free memory 141 M buffer memory 1403 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 17:28:17 up 5 min, 2 users, load average: 1.40, 1.35, 0.68 Tasks: 233 total, 1 running, 232 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.2 total, 2887.4 free, 3724.6 used, 1544.8 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 4338.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 5.7M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 12G 16G 44% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 64K 5.0M 2% /run/lock /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 807M 0 807M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Aug 29 17:22:17 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:34:62:E1 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=87a1b5ec-02 rootfstype=ext4 fsck.repair=yes rootwait [Fri Aug 29 17:22:20 2025] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Fri Aug 29 17:22:21 2025] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.5G /var/ 2.4G /var/log/journal/41e4a03f5b7d490a97523b509aa0a614 2.4G /var/log/journal 2.4G /var/log 543M /var/cache Archived and active journals take up 2.3G in the file system. /opt/iobroker/backups: 12M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 705M /opt/iobroker/iobroker-data/ 553M /opt/iobroker/iobroker-data/files 113M /opt/iobroker/iobroker-data/backup-objects 99M /opt/iobroker/iobroker-data/files/vis-2 67M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/objects.jsonl 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 30M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map 26M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI04PGZY-if00-port0 /dev/serial/by-id/usb-busware.de_CUL868-if00 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.18.0 /usr/bin/node v22.18.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.33.0 nodejs: Installed: 22.18.0-1nodesource1 Candidate: 22.19.0-1nodesource1 Version table: 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages *** 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker iobroker (version: 7.0.7, hostname: iobroker , alive, uptime: 336) Core adapters versions js-controller: 7.0.7 admin: 7.6.17 javascript: 8.9.2 nodejs modules from github: 1 +-- iobroker.connector-local-control@0.0.4 (git+ssh://git@github.com/ConnectorGit/ioBroker.connector-local-control.git#af6ca3a95371ad333ec5e967fa33ce251bb87ad3) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.connector-local-control.0: connector-local-control: iobroker - enabled + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 system.adapter.devices.0 : devices : iobroker - disabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.followthesun.0 : followthesun : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker - disabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.jeelink.0 : jeelink : iobroker - enabled + system.adapter.mhi-wfrac.0 : mhi-wfrac : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nut.0 : nut : iobroker - enabled + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.reolink.0 : reolink : iobroker - enabled + system.adapter.reolink.1 : reolink : iobroker - enabled + system.adapter.reolink.2 : reolink : iobroker - enabled + system.adapter.reolink.3 : reolink : iobroker - enabled + system.adapter.reolink.4 : reolink : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: iobroker - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : iobroker - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: iobroker - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker - disabled + system.adapter.vis-2.0 : vis-2 : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "cul" : 2.2.0 , installed 2.2.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 8.9.2 , installed 8.9.2 Adapter "jeelink" : 1.2.5 , installed 1.2.5 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "mhi-wfrac" : 2.1.7 , installed 2.1.7 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "reolink" : 1.2.3 , installed 1.2.3 Adapter "shelly" : 10.1.0 , installed 10.1.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "vis-2" : 2.12.12 , installed 2.12.12 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-inventwo": 0.2.2, installed 0.2.2 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "vis-icontwo" : 1.12.0 , installed 1.12.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "worx" : 3.2.6 , installed 3.2.6 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 14416 States: 11412 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 http://deb.debian.org/debian bookworm-updates InRelease Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:8 https://apt.debmatic.de/debmatic stable InRelease Reading package lists... Pending Updates: 16 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:32001 0.0.0.0:* LISTEN 0 9268 1289/rfd tcp 0 0 127.0.0.1:12001 0.0.0.0:* LISTEN 1001 7805 1771/io.hm-rpc.0 tcp 0 0 127.0.0.1:12010 0.0.0.0:* LISTEN 1001 9733 1792/io.hm-rpc.1 tcp 0 0 0.0.0.0:31999 0.0.0.0:* LISTEN 0 7607 1575/ReGaHss.normal tcp 0 0 0.0.0.0:8183 0.0.0.0:* LISTEN 0 8734 1575/ReGaHss.normal tcp 0 0 0.0.0.0:8181 0.0.0.0:* LISTEN 0 7208 1119/lighttpd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 8618 1335/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 8613 1335/iobroker.js-co tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 7207 1119/lighttpd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1002 894/sshd: /usr/sbin tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 0 7214 1119/lighttpd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 9754 1808/io.mqtt.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 10577 1856/io.shelly.0 tcp 0 0 127.0.0.1:30080 0.0.0.0:* LISTEN 0 6107 1224/lighttpd tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 0 7212 1119/lighttpd tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 0 7216 1119/lighttpd tcp 0 0 0.0.0.0:2000 0.0.0.0:* LISTEN 0 7218 1119/lighttpd tcp 0 0 0.0.0.0:1999 0.0.0.0:* LISTEN 0 7210 1119/lighttpd tcp6 0 0 :::39292 :::* LISTEN 0 10270 1330/java tcp6 0 0 :::3000 :::* LISTEN 106 9375 1333/grafana tcp6 0 0 :::32010 :::* LISTEN 0 7158 1330/java tcp6 0 0 :::8181 :::* LISTEN 0 7209 1119/lighttpd tcp6 0 0 :::8082 :::* LISTEN 1001 10106 2102/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 8660 1446/io.admin.0 tcp6 0 0 :::8087 :::* LISTEN 1001 11586 2117/io.ws.0 tcp6 0 0 :::8086 :::* LISTEN 999 9280 1076/influxd tcp6 0 0 :::80 :::* LISTEN 0 7206 1119/lighttpd tcp6 0 0 :::22 :::* LISTEN 0 1004 894/sshd: /usr/sbin tcp6 0 0 :::9294 :::* LISTEN 0 7465 1330/java tcp6 0 0 :::9293 :::* LISTEN 0 7464 1330/java tcp6 0 0 :::9292 :::* LISTEN 0 7215 1119/lighttpd tcp6 0 0 :::2010 :::* LISTEN 0 7213 1119/lighttpd tcp6 0 0 :::2001 :::* LISTEN 0 7217 1119/lighttpd tcp6 0 0 :::2000 :::* LISTEN 0 7219 1119/lighttpd tcp6 0 0 :::1999 :::* LISTEN 0 7211 1119/lighttpd tcp6 0 0 :::18075 :::* LISTEN 1001 9688 1729/io.fullybrowse udp 0 0 0.0.0.0:32101 0.0.0.0:* 1001 11283 1950/io.connector-l udp 0 0 0.0.0.0:52923 0.0.0.0:* 104 6378 720/avahi-daemon: r udp 0 0 127.0.0.1:8182 0.0.0.0:* 0 6106 1199/hss_led udp 0 0 0.0.0.0:33941 0.0.0.0:* 0 9269 1289/rfd udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 6376 720/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 0 1996 1179/ssdpd udp 0 0 127.0.0.1:1998 0.0.0.0:* 0 10305 1575/ReGaHss.normal udp 0 0 0.0.0.0:43439 0.0.0.0:* 0 6059 1175/eq3configd udp6 0 0 fe80::c317:5c0b:740:546 :::* 0 6536 851/NetworkManager udp6 0 0 :::5353 :::* 104 6377 720/avahi-daemon: r udp6 0 0 :::38399 :::* 104 6379 720/avahi-daemon: r udp6 0 0 :::42804 :::* 0 8612 1330/java *** Log File - Last 25 Lines *** 2025-08-29 17:24:57.458 - info: reolink.3 (2147) Changed state: EmailNotification 2025-08-29 17:24:57.459 - error: reolink.3 (2147) Set mail notification: Value not supported! 2025-08-29 17:24:59.107 - info: host.iobroker instance system.adapter.reolink.4 in version "1.2.3" started with pid 2197 2025-08-29 17:25:00.110 - info: reolink.4 (2197) starting. Version 1.2.3 in /opt/iobroker/node_modules/iobroker.reolink, node: v22.18.0, js-controller: 7.0.7 2025-08-29 17:25:00.120 - info: reolink.4 (2197) Reolink adapter has started 2025-08-29 17:25:00.121 - info: reolink.4 (2197) Current IP: 192.168.178.80 2025-08-29 17:25:01.219 - info: reolink.4 (2197) State value to set for "reolink.4.settings.EmailNotification" has to be type "number" but received type "string" 2025-08-29 17:25:01.261 - info: reolink.4 (2197) Changed state: EmailNotification 2025-08-29 17:25:01.261 - error: reolink.4 (2197) Set mail notification: Value not supported! 2025-08-29 17:25:03.088 - info: host.iobroker instance system.adapter.mhi-wfrac.0 in version "2.1.7" started with pid 2212 2025-08-29 17:25:03.906 - info: mhi-wfrac.0 (2212) starting. Version 2.1.7 in /opt/iobroker/node_modules/iobroker.mhi-wfrac, node: v22.18.0, js-controller: 7.0.7 2025-08-29 17:25:05.762 - info: web.0 (2102) ==> Connected system.user.admin from ::ffff:192.168.178.58 2025-08-29 17:25:09.168 - info: web.0 (2102) ==> Connected system.user.admin from ::ffff:192.168.178.58 2025-08-29 17:25:37.966 - error: mhi-wfrac.0 (2212) Klimaanlage: Failed to register device! | Error: connect EHOSTUNREACH 192.168.178.31:51443 2025-08-29 17:27:23.147 - info: admin.0 (1446) ==> Connected system.user.admin from ::ffff:192.168.178.20 2025-08-29 17:27:31.484 - info: host.iobroker stopInstance system.adapter.mhi-wfrac.0 (force=false, process=true) 2025-08-29 17:27:31.488 - info: mhi-wfrac.0 (2212) Got terminate signal TERMINATE_YOURSELF 2025-08-29 17:27:31.489 - info: mhi-wfrac.0 (2212) terminating 2025-08-29 17:27:31.490 - info: mhi-wfrac.0 (2212) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-08-29 17:27:31.543 - info: host.iobroker stopInstance system.adapter.mhi-wfrac.0 send kill signal 2025-08-29 17:27:31.991 - info: mhi-wfrac.0 (2212) terminating 2025-08-29 17:27:32.031 - info: host.iobroker instance system.adapter.mhi-wfrac.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-08-29 17:27:35.364 - info: host.iobroker instance system.adapter.mhi-wfrac.0 in version "2.1.7" started with pid 3693 2025-08-29 17:27:36.215 - info: mhi-wfrac.0 (3693) starting. Version 2.1.7 in /opt/iobroker/node_modules/iobroker.mhi-wfrac, node: v22.18.0, js-controller: 7.0.7 2025-08-29 17:28:07.982 - error: mhi-wfrac.0 (3693) Klimaanlage: Failed to register device! | Error: connect EHOSTUNREACH 192.168.178.31:51443============ Mark until here for C&P =============
-
Bei mir hat auch alles soweit geklappt. Ich bekomme aber jetzt diese Warnungen beim apt update.
Warning: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z Warning: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Warning: Failed to fetch https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z Warning: Some index files failed to download. They have been ignored, or old ones used instead.Kann / muss ich da was dagegen tun? Danke für eine Hilfe hierzu.
-
@iobroker2001 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Frage: Muss ich mir deshalb Gedanken machen?
Du solltest schauen, was 'Debmatic' zum Support von Debian13 'Trixie' sagt. Das ist ja relativ frisch, gut möglich, das Zeuch von Dritten noch nicht an das aktuelle Release angepasst wurden. Darauf deutet auch die Meldung mit "Ich konnte Debmatic danach auch nicht mehr manuell installieren, da irgendwie etwas in den Kernel-Headern fehlen würde." hin.
Denn auch ein auf Debian13 basierendes RaspberryOS 13 wurde ja noch nicht veröffentlicht, du hast also da jetzt eigentlich eine Beta-Version laufen.- Frage: Beim Update bekomme ich eine Warnung bzgl. der Debmatic-Signatur.
Wie kann ich das beheben?
Einen aktuellen Schüssel einspielen, wenn es denn einen gibt.
Ist das gleiche 'Problem' wie bei @hotspot_2. Der muss den Grafana-Key neueinspielen.
Für nodesource gibt es aber z. B. noch keinen aktuellen.Näheres hier:
https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind
- Frage: Beim Update bekomme ich eine Warnung bzgl. der Debmatic-Signatur.
-
Moin zusammen!
Erst einmal vielen Dank für die sehr gute Anleitung von @Thomas-Braun.
Die hätte einige Zeitersparnis für mich bedeutet, so ich sie denn vorher gesucht/gefunden/gelesen hätte...
Na immerhin konnte ich mit den apt commands nochmal "nass hinterherwischen".
Trixie ist drauf, Sources sind umgestellt, Keys sind verlinkt/angepasst (soweit verfügbar).Was mich nun etwas stutzig macht, ist das nodejs sich von v22.15.0 aus nicht mehr updaten lässt (-> v22.19.0), obwohl alle Sources m.M.n. soweit OK sind. Im CLI
iob nodejs-updatewird die neue nodejs v22.19.0 als verfügbar angezeigt, dann aber "erfolgreich" wieder die v22.15.0 drüber installiert.Logfile:
ioBroker nodejs fixer 2025-08-09 Recommended nodejs-version is: 22.19.0 Checking your installation now. Please be patient! Your current setup is: /usr/bin/nodejs v22.15.0 /usr/bin/node v22.15.0 /usr/bin/npm 10.9.2 /usr/bin/npx 10.9.2 /usr/bin/corepack 0.32.0 We found these nodejs versions available for installation: nodejs: Installed: 22.15.0-1nodesource1 Candidate: 22.15.0-1nodesource1 Version table: *** 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages 20.19.2+dfsg-1 500 500 https://deb.debian.org/debian trixie/main armhf Packages Nothing to do - Your installation is using the correct paths. You are running nodejs v22.15.0. Do you want to install recommended version 22.19.0? Press <y> to continue or any other key to quit Trying to fix your installation now. Please be patient. rm: cannot remove '/etc/apt/keyrings/nodesource.gpg 2> /dev/null': No such file or directory Stopping ioBroker now ###### ioBroker has been stopped Removing dfsg-nodejs *** These repos are active on your system: Hit:1 https://deb.debian.org/debian trixie InRelease Hit:2 https://deb.debian.org/debian trixie-updates InRelease Hit:3 https://deb.debian.org/debian-security trixie-security InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://dl.yarnpkg.com/debian stable InRelease Hit:7 http://archive.raspberrypi.org/debian trixie InRelease Reading package lists... Done W: https://dl.yarnpkg.com/debian/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details W: http://archive.raspberrypi.org/debian/dists/trixie/InRelease: Policy will reject signature within a year, see --audit for details *** Installing ca-certificates, curl and gnupg, just in case they are missing. *** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_22.x nodistro main Package: nodejs Pin: origin deb.nodesource.com Pin-Priority: 1001 *** These repos are active after the adjustments: Hit:1 https://apt.grafana.com stable InRelease Hit:2 https://deb.debian.org/debian trixie InRelease Hit:3 https://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.debian.org/debian-security trixie-security InRelease Hit:5 http://archive.raspberrypi.org/debian trixie InRelease Hit:6 https://repos.influxdata.com/debian stable InRelease Hit:7 https://dl.yarnpkg.com/debian stable InRelease Get:8 https://deb.nodesource.com/node_22.x nodistro InRelease [12.1 kB] Get:9 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages [6705 B] Fetched 18.8 kB in 1s (28.7 kB/s) Reading package lists... Done W: http://archive.raspberrypi.org/debian/dists/trixie/InRelease: Policy will reject signature within a year, see --audit for details W: https://dl.yarnpkg.com/debian/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Installing nodejs now! Installing latest nodejs v22 release W: http://archive.raspberrypi.org/debian/dists/trixie/InRelease: Policy will reject signature within a year, see --audit for details W: https://dl.yarnpkg.com/debian/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details SUCCESS! v22.15.0 has been installed! You are using the latest nodejs@22 release now! COMPATIBILITY CHECK IN PROGRESS (Only a --dry-run! No modules are really changed or added!) add fsevents 2.3.3 add @img/sharp-win32-x64 0.34.3 add @img/sharp-win32-ia32 0.34.3 add @img/sharp-win32-arm64 0.34.3 add @img/sharp-wasm32 0.34.3 add @img/sharp-linuxmusl-x64 0.34.3 add @img/sharp-linuxmusl-arm64 0.34.3 add @img/sharp-linux-x64 0.34.3 add @img/sharp-linux-s390x 0.34.3 add @img/sharp-linux-ppc64 0.34.3 add @img/sharp-linux-arm64 0.34.3 add @img/sharp-libvips-linuxmusl-x64 1.2.0 add @img/sharp-libvips-linuxmusl-arm64 1.2.0 add @img/sharp-libvips-linux-x64 1.2.0 add @img/sharp-libvips-linux-s390x 1.2.0 add @img/sharp-libvips-linux-ppc64 1.2.0 add @img/sharp-libvips-linux-arm64 1.2.0 add @img/sharp-libvips-darwin-x64 1.2.0 add @img/sharp-libvips-darwin-arm64 1.2.0 add @img/sharp-darwin-x64 0.34.3 add @img/sharp-darwin-arm64 0.34.3 add @ffprobe-installer/win32-x64 5.1.0 add @ffprobe-installer/win32-ia32 5.1.0 add @ffprobe-installer/linux-x64 5.2.0 add @ffprobe-installer/linux-ia32 5.2.0 add @ffprobe-installer/linux-arm64 5.2.0 add @ffprobe-installer/darwin-x64 5.1.0 add @ffprobe-installer/darwin-arm64 5.0.1 add @ffmpeg-installer/win32-x64 4.1.0 add @ffmpeg-installer/win32-ia32 4.1.0 add @ffmpeg-installer/linux-x64 4.1.0 add @ffmpeg-installer/linux-ia32 4.1.0 add @ffmpeg-installer/linux-arm64 4.1.4 add @ffmpeg-installer/darwin-x64 4.1.0 add @ffmpeg-installer/darwin-arm64 4.1.5 add @emnapi/runtime 1.4.4 add tslib 2.8.1 added 37 packages in 9s 165 packages are looking for funding run `npm fund` for details We tried our best to fix your nodejs. Please run iob diag again to verify. *** RESTARTING ioBroker NOW! *** Please refresh or restart your browser in a few moments. pi@raspberrypi: $Hat jemand einen Tipp für mich, wie ich das hinbiegen kann?
Gruß - Noni
-
@nonixnarrez sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Hat jemand einen Tipp für mich, wie ich das hinbiegen kann?
In dem du ein reines 64Bit-System fährst. Dein 32Bit-armhf wird ganz offenbar nicht mehr vollkommen unterstützt.
-
@thomas-braun Danke für die schnelle Antwort.
Ich bin mir eigentlich ziemlich sicher, dass ich (damals) ein 64bit Raspberry Pi OS Bullseye (v11) installiert habe.
pi@raspberrypi:/ $ uname -a Linux raspberrypi 6.12.43-v8+ #1901 SMP PREEMPT Tue Aug 26 16:51:52 BST 2025 aarch64 GNU/LinuxAlso nix mehr mit hinbiegen - nur Neuinstallation?
Gruß - Noni
-
@nonixnarrez sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Ich bin mir eigentlich ziemlich sicher, dass ich (damals) ein 64bit Raspberry Pi OS Bullseye (v11) installiert habe.
Und ich bin mir ziemlich sicher, dass du da höchstens einen 64Bit-Kernel hast, der Rest aber 32-bittig ist.
Iniob diagsteht es ganz am Anfang drin.
Und inline-Upgrades von 11 auf 12 funktionierten auch nicht richtig.Kannste nur per Neuinstallation richtig gerade biegen.
-
@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
@nonixnarrez sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Ich bin mir eigentlich ziemlich sicher, dass ich (damals) ein 64bit Raspberry Pi OS Bullseye (v11) installiert habe.
Und ich bin mir ziemlich sicher, dass du da höchstens einen 64Bit-Kernel hast, der Rest aber 32-bittig ist.
Iniob diagsteht es ganz am Anfang drin.
Und inline-Upgrades von 11 auf 12 funktionierten auch nicht richtig.Kannste nur per Neuinstallation richtig gerade biegen.
Yup! Recht hat er (leider)!
Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.43-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bitHerzlichen Glückwunsch - da habe ich wohl gerade eine Neuinstallation gewonnen!
Danke für den Support.
Gruß - Noni
-
@nonixnarrez sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Yup! Recht hat er (leider)!
Was soll ich jetzt sagen? Außer: Natürlich hab ich Recht!
-
@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Ist das gleiche 'Problem' wie bei @hotspot_2. Der muss den Grafana-Key neueinspielen.
Für nodesource gibt es aber z. B. noch keinen aktuellen.Das heißt im Moment kann ich gegen diese Warnungen (noch) nichts machen. Der Grafana Key kann mit dem Kommandos aus deinem Thread (Link) erneuert werden sobald es einen gibt, oder?
-
Der Grafana-Key ist aktualisiert worden.
Kann mit den Kommandos von dort eingespielt werden.
