UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Dieter_P]

@thomas-braun

Danke hat für ein debian 12.11 auf einem Firebat T8 Pro ohne jeglichen Hürden so funktioniert und läuft.

[Matzebhv]

Hier auch erledigt.

root@iOBroker:/home/iobroker# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 13 (trixie)
Release: 13
Codename: trixie
root@iOBroker:/home/iobroker#

[lessthanmore]

@matzebhv said in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

root@

Na lass das mal nicht @Thomas-Braun sehen :-D

[Thomas Braun]

@lessthanmore sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Na lass das mal nicht @Thomas-Braun sehen

Hab ich schon heute Vormittag gesehen...

[teletapi]

@thomas-braun

Ich hab das hier gepostet weil ich vermute das die Meldung jetzt kam nachdem ich das Update vor ein paar Tagen auf "Trixie" bzw das Nodejs update auf die 22.18 gemacht hatte. Falls das damit nix zu tun hat dann einfach löschen oder wenns woanders hion passen würde verschieben

Gerade eben wollte ich per sudo apt update nachschauen ob es neue Updates gibt da kam folgende Meldung

Was wäre denn da jetzt zu tun.

pi@Raspberrypi5:~ $ sudo apt update
OK:1 http://deb.debian.org/debian trixie InRelease
OK:2 http://deb.debian.org/debian-security trixie-security InRelease
OK:3 http://archive.raspberrypi.com/debian trixie InRelease
OK:4 http://deb.debian.org/debian trixie-updates InRelease
OK:5 https://repos.influxdata.com/debian stable InRelease
Holen:6 https://apt.grafana.com stable InRelease [7.661 B]
Fehl:6 https://apt.grafana.com stable InRelease
  Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
OK:7 https://deb.nodesource.com/node_22.x nodistro InRelease
Alle Pakete sind aktuell.
Warnung: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. OpenPGP-Signaturüberprüfung fehlgeschlagen: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
Warnung: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Warnung: Fehlschlag beim Holen von https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
Warnung: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt.

Anbei noch ein aktuelles iob diag

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: Raspberrypi5
       Icon name: computer
          Kernel: Linux 6.12.34+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 01:39:28 up 2 days, 12:08,  1 user,  load average: 0.33, 0.22, 0.25
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Mon 2025-08-25 01:39:28 CEST
           Universal time: Sun 2025-08-24 23:39:28 UTC
                 RTC time: Sun 2025-08-24 23:39:28
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/pi
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        4.4G        1.0G         18M        3.3G        4.1G
Swap:           209M        207M        1.9M
Total:          8.7G        4.6G        1.0G

Active iob-Instances:   33

         8063 M total memory
         4154 M used memory
         3785 M active memory
         2753 M inactive memory
          965 M free memory
          141 M buffer memory
         2999 M swap cache
          199 M total swap
          198 M used swap
            1 M free swap

*** top - Table Of Processes  ***
top - 01:39:28 up 2 days, 12:08,  1 user,  load average: 0.33, 0.22, 0.25
Tasks: 243 total,   1 running, 242 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  2.4 sy,  0.0 ni, 97.6 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   8063.1 total,    962.7 free,   4155.5 used,   3142.9 buff/cache
MiB Swap:    200.0 total,      1.8 free,    198.2 used.   3907.5 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     1.6G   16M  1.6G   1% /run
/dev/sda2      ext4       59G   23G   33G  41% /
tmpfs          tmpfs     4.0G     0  4.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
tmpfs          tmpfs     4.0G   11M  4.0G   1% /tmp
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
/dev/sda1      vfat      510M   73M  438M  15% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyAMA10.service
tmpfs          tmpfs     807M   32K  807M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Aug 22 13:31:20 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:A3:25:8A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=beeda195-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Fri Aug 22 13:31:25 2025] EXT4-fs (sda2): mounted filesystem 6835594d-a5f3-459f-a244-318060e7e0ab ro with ordered data mode. Quota mode: none.
[Fri Aug 22 13:31:26 2025] EXT4-fs (sda2): re-mounted 6835594d-a5f3-459f-a244-318060e7e0ab r/w.

Show mounted filesystems:
TARGET           SOURCE    FSTYPE OPTIONS
/                /dev/sda2 ext4   rw,noatime
`-/boot/firmware /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
3.1G    /var/
1.3G    /var/log/journal/02a43974e4004c17afbe02a71ed8236e
1.3G    /var/log/journal
1.3G    /var/log
1.3G    /var/lib

Archived and active journals take up 1.2G in the file system.

/opt/iobroker/backups:
3.3G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
501M    /opt/iobroker/iobroker-data/
160M    /opt/iobroker/iobroker-data/files
109M    /opt/iobroker/iobroker-data/backup-objects
72M     /opt/iobroker/iobroker-data/node-red
71M     /opt/iobroker/iobroker-data/node-red/node_modules

The five largest files in iobroker-data are:
40M     /opt/iobroker/iobroker-data/objects.jsonl
13M     /opt/iobroker/iobroker-data/states.jsonl
8.8M    /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CjzUbllv.js
8.6M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js
6.2M    /opt/iobroker/iobroker-data/jarvis/0/jarvis.0.devices.json

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.18.0
/usr/bin/node           v22.18.0
/usr/bin/npm            10.9.3
/usr/bin/npx            10.9.3
/usr/bin/corepack       0.33.0

nodejs:
  Installed: 22.18.0-1nodesource1
  Candidate: 22.18.0-1nodesource1
  Version table:
 *** 22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
Raspberrypi5        Raspberrypi5 (version: 7.0.7, hostname: Raspberrypi5  , alive, uptime: 216475)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.2
javascript:     9.0.11

nodejs modules from github:     5
+-- iobroker.influxdb@4.0.3 (git+ssh://git@github.com/ioBroker/ioBroker.influxdb.git#28ac2b78843928094d8a6fea3a43a45cde1cc19d)
+-- iobroker.jarvis@3.2.0-rc.17 (git+ssh://git@github.com/Zefau/ioBroker.jarvis.git#65370bd2ad4617722447bcff04ba4dc6429bed9b)
+-- iobroker.nspanel-lovelace-ui@0.2.4 (git+ssh://git@github.com/ticaki/ioBroker.nspanel-lovelace-ui.git#dcbe5f9e78b9f2b992650058cd43c45843b6ddff)
+-- iobroker.pirate-weather@0.2.0 (git+ssh://git@github.com/ticaki/ioBroker.pirate-weather.git#5afe302853331ec86024d6aa8b3f1aefd85f7c03)
+-- iobroker.rpi2@2.4.0 (git+ssh://git@github.com/Grothesk242/ioBroker.rpi2.git#c87e9539d89bac8f4d19b266679bcb78ed554f1d)

Adapter State
+ system.adapter.admin.0                  : admin                 : Raspberrypi5                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : Raspberrypi5                             -  enabled
  system.adapter.alias-manager.0          : alias-manager         : Raspberrypi5                             -  enabled
+ system.adapter.alpha-ess.0              : alpha-ess             : Raspberrypi5                             -  enabled
+ system.adapter.backitup.0               : backitup              : Raspberrypi5                             -  enabled
+ system.adapter.cloud.0                  : cloud                 : Raspberrypi5                             -  enabled
  system.adapter.devices.0                : devices               : Raspberrypi5                             -  enabled
+ system.adapter.discovery.0              : discovery             : Raspberrypi5                             -  enabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: Raspberrypi5                             -  enabled
  system.adapter.energiefluss-erweitert.1 : energiefluss-erweitert: Raspberrypi5                             - disabled
+ system.adapter.energiefluss-erweitert.2 : energiefluss-erweitert: Raspberrypi5                             -  enabled
  system.adapter.energiefluss-erweitert.3 : energiefluss-erweitert: Raspberrypi5                             - disabled
+ system.adapter.fritzdect.0              : fritzdect             : Raspberrypi5                             -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : Raspberrypi5                             -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 18701
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 18701
+ system.adapter.homeconnect.0            : homeconnect           : Raspberrypi5                             -  enabled
+ system.adapter.hue.0                    : hue                   : Raspberrypi5                             -  enabled, port: 80
  system.adapter.ical.0                   : ical                  : Raspberrypi5                             -  enabled
  system.adapter.ical.1                   : ical                  : Raspberrypi5                             -  enabled
+ system.adapter.influxdb.0               : influxdb              : Raspberrypi5                             -  enabled, port: 8086
  system.adapter.iot.0                    : iot                   : Raspberrypi5                             - disabled
+ system.adapter.jarvis.0                 : jarvis                : Raspberrypi5                             -  enabled
+ system.adapter.javascript.0             : javascript            : Raspberrypi5                             -  enabled
+ system.adapter.matter.0                 : matter                : Raspberrypi5                             -  enabled
+ system.adapter.modbus.0                 : modbus                : Raspberrypi5                             -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : Raspberrypi5                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : Raspberrypi5                             -  enabled
+ system.adapter.nspanel-lovelace-ui.0    : nspanel-lovelace-ui   : Raspberrypi5                             -  enabled
+ system.adapter.nuki.0                   : nuki                  : Raspberrypi5                             -  enabled
  system.adapter.openweathermap.0         : openweathermap        : Raspberrypi5                             -  enabled
+ system.adapter.ping.0                   : ping                  : Raspberrypi5                             -  enabled
+ system.adapter.pirate-weather.0         : pirate-weather        : Raspberrypi5                             -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : Raspberrypi5                             -  enabled
+ system.adapter.simple-api.0             : simple-api            : Raspberrypi5                             -  enabled, port: 8087, bind: 192.168.178.82, run as: admin
+ system.adapter.socketio.0               : socketio              : Raspberrypi5                             -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : Raspberrypi5                             -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : Raspberrypi5                             -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : Raspberrypi5                             -  enabled
+ system.adapter.web.0                    : web                   : Raspberrypi5                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Raspberrypi5                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 18701
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 18701
+ system.adapter.hue.0                    : hue                   : Raspberrypi5                             -  enabled, port: 80
+ system.adapter.influxdb.0               : influxdb              : Raspberrypi5                             -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : Raspberrypi5                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspberrypi5                             -  enabled, port: 8087, bind: 192.168.178.82, run as: admin
+ system.adapter.socketio.0               : socketio              : Raspberrypi5                             -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : Raspberrypi5                             -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : Raspberrypi5                             -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : Raspberrypi5                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): beta
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: beta
Adapter    "admin"        : 7.7.2    , installed 7.7.2
Adapter    "alexa2"       : 3.27.3   , installed 3.27.3
Adapter    "alias-manager": 2.0.0    , installed 2.0.0
Adapter    "alpha-ess"    : 3.0.1    , installed 3.0.1
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "energiefluss-erweitert": 0.7.8, installed 0.7.8
Adapter    "fritzdect"    : 2.6.2    , installed 2.6.2
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "homeconnect"  : 1.4.3    , installed 1.4.3
Adapter    "hue"          : 3.16.2   , installed 3.16.2
Adapter    "ical"         : 1.16.2   , installed 1.16.2
Adapter    "influxdb"     : 4.0.2    , installed 4.0.3
Adapter    "iot"          : 3.6.0    , installed 3.6.0
Adapter    "jarvis"       : 3.2.0-rc.5, installed 3.2.0-rc.17
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "matter"       : 0.5.2    , installed 0.5.2
Adapter    "modbus"       : 6.4.0    , installed 6.4.0
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "net-tools"    : 1.2.0    , installed 1.2.0
Adapter    "nuki"         : 2.0.0    , installed 2.0.0
Adapter    "openweathermap": 1.4.0   , installed 1.4.0
Adapter    "ping"         : 1.7.9    , installed 1.7.9
Adapter    "rpi2"         : 2.4.0    , installed 2.4.0
Adapter    "simple-api"   : 3.0.7    , installed 3.0.7
Adapter    "socketio"     : 7.0.8    , installed 7.0.8
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "web"          : 7.0.9    , installed 7.0.9
Adapter    "ws"           : 3.0.19   , installed 3.0.19

Objects and States
Please stand by - This may take a while
Objects:        14508
States:         14163

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian-security trixie-security InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian trixie InRelease
Get:5 https://apt.grafana.com stable InRelease [7661 B]
Hit:6 https://repos.influxdata.com/debian stable InRelease
Err:5 https://apt.grafana.com stable InRelease
  Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.178.82:18701    0.0.0.0:*               LISTEN      1001       10438      1488/io.hm-rpc.0
tcp        0      0 192.168.178.82:18702    0.0.0.0:*               LISTEN      1001       12321      1505/io.hm-rpc.1
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      106        7481       861/mosquitto
tcp        0      0 0.0.0.0:1886            0.0.0.0:*               LISTEN      1001       226331     16034/io.sonoff.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          8253       834/sshd: /usr/sbin
tcp        0      0 192.168.178.82:8087     0.0.0.0:*               LISTEN      1001       15114      2308/io.simple-api.
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       7690       1187/iobroker.js-co
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       7697       1187/iobroker.js-co
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          7638       1145/exim4
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          7639       1145/exim4
tcp6       0      0 :::1883                 :::*                    LISTEN      106        7482       861/mosquitto
tcp6       0      0 :::8400                 :::*                    LISTEN      1001       3524004    268297/io.jarvis.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          8255       834/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       10004      1229/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       16426      2401/io.web.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       15866      2367/io.socketio.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        8478       853/influxd
tcp6       0      0 :::3000                 :::*                    LISTEN      107        9965       1186/grafana
udp        0      0 0.0.0.0:48124           0.0.0.0:*                           1001       15796      2192/io.matter.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       14081      2192/io.matter.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       14073      2192/io.matter.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        1797       648/avahi-daemon: r
udp        0      0 0.0.0.0:5541            0.0.0.0:*                           1001       14090      2192/io.matter.0
udp        0      0 0.0.0.0:58952           0.0.0.0:*                           104        1799       648/avahi-daemon: r
udp6       0      0 :::48124                :::*                                1001       15795      2192/io.matter.0
udp6       0      0 fe80::f05b:9255:16f:546 :::*                                0          9894       735/NetworkManager
udp6       0      0 fe80::38be:beb2:fe6:546 :::*                                0          8329       735/NetworkManager
udp6       0      0 :::5353                 :::*                                1001       14084      2192/io.matter.0
udp6       0      0 :::5353                 :::*                                1001       14076      2192/io.matter.0
udp6       0      0 :::5353                 :::*                                104        1798       648/avahi-daemon: r
udp6       0      0 :::5541                 :::*                                1001       14089      2192/io.matter.0
udp6       0      0 :::34804                :::*                                104        1800       648/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-08-25 01:39:40.006  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText]
2025-08-25 01:39:40.009  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText]
2025-08-25 01:39:40.014  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText]
2025-08-25 01:39:40.016  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText]
2025-08-25 01:39:45.004  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText]
2025-08-25 01:39:45.009  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText]
2025-08-25 01:39:50.003  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText]
2025-08-25 01:39:50.006  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText]
2025-08-25 01:39:50.058  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText]
2025-08-25 01:39:50.100  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText]
2025-08-25 01:39:53.009  - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend]
2025-08-25 01:39:53.052  - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend]
2025-08-25 01:39:53.053  - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend]
2025-08-25 01:39:55.003  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText]
2025-08-25 01:39:55.047  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText]
2025-08-25 01:40:00.004  - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend]
2025-08-25 01:40:00.010  - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend]
2025-08-25 01:40:00.010  - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend]
2025-08-25 01:40:00.010  - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend]
2025-08-25 01:40:00.019  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText]
2025-08-25 01:40:00.026  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText]
2025-08-25 01:40:00.031  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText]
2025-08-25 01:40:00.035  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText]
2025-08-25 01:40:05.005  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText]
2025-08-25 01:40:05.010  - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText]

============ Mark until here for C&P =============

iob diag has finished.

Ich hab jetzt mal Chat GPT gefragt und hier wurde mir folgendes angeboten was ich auch durchgeführt habe. ich hatte mir im Vorfeld eine Sicherungskopie meiner Festplatte gemacht so das ich jederzeit auf das vorran gegangene System wieder zurück kann wenn was schief läuft. Scheint aber zu funktionieren. Fehler ist zumindest weg.

1. Alte Datei/Keyreferenzen löschen

Falls du noch eine alte Repository-Datei hast, die auf den abgelaufenen Key verweist, am besten löschen:
sudo rm /etc/apt/sources.list.d/grafana.list
2. Neuen Key herunterladen und sicher ablegen
sudo mkdir -p /usr/share/keyrings
sudo wget -q -O /usr/share/keyrings/grafana.gpg https://apt.grafana.com/gpg.key
3. Repository mit neuem Key einrichten
echo "deb [signed-by=/usr/share/keyrings/grafana.gpg] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
4. Update durchführen
sudo apt update

Ich hoffe das das so in Ordnung ist.

Nach einem weiteren iob diag hatte ich wieder eine Meldung

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* iobroker.service loaded failed failed ioBroker Server

Legend: LOAD   -> Reflects whether the unit definition was properly loaded.
        ACTIVE -> The high-level unit activation state, i.e. generalization of SUB.
        SUB    -> The low-level unit activation state, values depend on unit type.

1 loaded units listed.

Die aber dann durch einen iob fix und einen reboot wieder verschwunden ist.

[Thomas Braun]

@teletapi sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Warnung: Fehlschlag beim Holen von https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z

Der Schlüssel muss erneuert werden, deiner ist am 23. August abgelaufen. Ich mache das immer danach:

https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind

Hier werden andere Verzeichnisse als bei SchrottJiPiehTieh verwendet. Kann man sich drüber streiten, was richtiger/besser ist, die aktuelle Vorgabe seitens Debian ist aber /etc/apt/keyrings/

[teletapi]

@thomas-braun kann ich das so lassen oder sollte ich das ändern damit das für die Zukunft evtl. besser ist.?

[Thomas Braun]

@teletapi

Nach der reinen Lehre gehören 'lose' Schlüssel nach /etc/apt/keyrings, das Verzeichnis /usr/share/keyrings ist eigentlich für Schlüssel vorgesehen, die mit Paketen gleich mitinstalliert werden.

Und auch auf der grafana-Seite wird /etc/apt/keyrings verwendet:

https://grafana.com/docs/grafana/latest/setup-grafana/installation/debian/

Halte ich ohnehin für die verlässlichere Quelle als irgendson ÄihEi-Gedönse. Kommt viel zu oft höchstens halbrichtiges bei herum. Wie man hier wieder sieht.

[teletapi]

@thomas-braun ich hab es jetzt hoffentlich gerade gebogen, danke

[iobroker2001]

Vielen Dank für die sehr gute Anleitung!
Ich habe soeben mein System auf Debian 13 gehievt, und ich sehe z. Zt. keine Probleme.

Dennoch habe ich 2 Fragen, weil mir beim 1. Versuch etwas passiert ist, womit mein Debmatic gelöscht wurde (ich wurde zwar gefragt, aber ich habe dennoch mit dem Kopf genickt ;-(

1. Beim folgenden Punkt wird Debmatic zum Löschen angeboten:

sudo apt purge '~o'
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
  appstream                  lighttpd-mod-deflate  python3-jaraco.context
  ca-certificates-java       lighttpd-mod-openssl  python3-jaraco.functools
  detect-radio-module        lighttpd-modules-lua  python3-jwt
  gir1.2-packagekitglib-1.0  lua-bit32             python3-lazr.restfulclient
  ipcalc                     lua-filesystem        python3-lazr.uri
  java-common                lua-socket            python3-more-itertools
  libappstream5              packagekit            python3-oauthlib
  libgstreamer1.0-0          packagekit-tools      python3-pkg-resources
  liblcms2-2                 pigpio-tools          python3-pyparsing
  liblua5.4-0                python3-autocommand   python3-typeguard
  libpackagekit-glib2-18     python3-blinker       python3-typing-extensions
  libstemmer0d               python3-dbus          python3-wadllib
  libxmlb2                   python3-httplib2      spawn-fcgi
  lighttpd                   python3-inflect       wait-sysfs-notify
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.

ENTFERNE:
  debmatic*       libpigpio1*         libunistring2*            python3-software-properties*
  libapt-pkg6.0*  libpigpiod-if-dev*  openjdk-17-jre-headless*  raspberrypi-kernel-headers*
  libcups2*       libpigpiod-if1*     pigpio*                   raspi-gpio*
  libpigpio-dev*  libpigpiod-if2-1*   pigpiod*                  software-properties-common*

Zusammenfassung:
  Aktualisiere: 0, Installiere: 0, Entferne: 16, Aktualisiere nicht: 0
  Freigegebener Platz: 266 MB

Fortfahren? [J/n] n
Abbruch.

Das hatte ich beim 1. Versuch auch dämlicherweise mit J beantwortet. Ich konnte Debmatic danach auch nicht mehr manuell installieren, da irgendwie etwas in den Kernel-Headern fehlen würde.(Meldung habe ich leider nicht mehr)
Jetzt, beim 2. Mal, habe ich auf das Löschen verzichtet.
Frage: Muss ich mir deshalb Gedanken machen?

2. Frage: Beim Update bekomme ich eine Warnung bzgl. der Debmatic-Signatur.
Wie kann ich das beheben?

OK:1 https://apt.debmatic.de/debmatic stable InRelease
OK:2 http://archive.raspberrypi.com/debian trixie InRelease                                             
OK:3 https://apt.grafana.com stable InRelease                                                           
OK:4 http://deb.debian.org/debian trixie InRelease                                                      
OK:5 http://deb.debian.org/debian-security trixie-security InRelease                                    
OK:6 https://repos.influxdata.com/debian stable InRelease                 
OK:7 http://deb.debian.org/debian trixie-updates InRelease
OK:8 https://deb.nodesource.com/node_22.x nodistro InRelease
Alle Pakete sind aktuell.                   
Warnung: https://apt.debmatic.de/debmatic/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details
Warnung: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details

Das war mein System VOR dem Update:

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: iobroker
       Icon name: computer
          Kernel: Linux 6.12.34+rpt-rpi-2712
    Architecture: arm64
OS is similar to: 

Model		: Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 17:28:16 up 5 min,  2 users,  load average: 1.40, 1.35, 0.68
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Fri 2025-08-29 17:28:16 CEST
           Universal time: Fri 2025-08-29 15:28:16 UTC
                 RTC time: Fri 2025-08-29 15:28:16
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: 	false
Unit display-manager.service could not be found.
Display-Manager: 	
Desktop: 		
Session: 		tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        3.9G        3.0G        6.0M        1.6G        4.6G
Swap:           209M          0B        209M
Total:          8.7G        3.9G        3.2G

Active iob-Instances: 	36

         8063 M total memory
         3722 M used memory
         3826 M active memory
          909 M inactive memory
         2889 M free memory
          141 M buffer memory
         1403 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 17:28:17 up 5 min,  2 users,  load average: 1.40, 1.35, 0.68
Tasks: 233 total,   1 running, 232 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   8063.2 total,   2887.4 free,   3724.6 used,   1544.8 buff/cache     
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   4338.6 avail Mem 

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     1.6G  5.7M  1.6G   1% /run
/dev/mmcblk0p2 ext4       29G   12G   16G  44% /
tmpfs          tmpfs     4.0G     0  4.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   64K  5.0M   2% /run/lock
/dev/mmcblk0p1 vfat      510M   66M  445M  13% /boot/firmware
tmpfs          tmpfs     807M     0  807M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Aug 29 17:22:17 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:34:62:E1 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=87a1b5ec-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Aug 29 17:22:20 2025] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[Fri Aug 29 17:22:21 2025] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
3.5G	/var/
2.4G	/var/log/journal/41e4a03f5b7d490a97523b509aa0a614
2.4G	/var/log/journal
2.4G	/var/log
543M	/var/cache

Archived and active journals take up 2.3G in the file system.

/opt/iobroker/backups:
12M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
705M	/opt/iobroker/iobroker-data/
553M	/opt/iobroker/iobroker-data/files
113M	/opt/iobroker/iobroker-data/backup-objects
99M	/opt/iobroker/iobroker-data/files/vis-2
67M	/opt/iobroker/iobroker-data/files/echarts.admin

The five largest files in iobroker-data are:
35M	/opt/iobroker/iobroker-data/objects.jsonl
35M	/opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
30M	/opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map
26M	/opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M	/opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI04PGZY-if00-port0
/dev/serial/by-id/usb-busware.de_CUL868-if00

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
tcp
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs 	v22.18.0
/usr/bin/node 		v22.18.0
/usr/bin/npm 		10.9.3
/usr/bin/npx 		10.9.3
/usr/bin/corepack 	0.33.0

nodejs:
  Installed: 22.18.0-1nodesource1
  Candidate: 22.19.0-1nodesource1
  Version table:
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
 *** 22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobroker            iobroker (version: 7.0.7, hostname: iobroker      , alive, uptime: 336)

Core adapters versions
js-controller: 	7.0.7
admin: 		7.6.17
javascript: 	8.9.2

nodejs modules from github: 	1
+-- iobroker.connector-local-control@0.0.4 (git+ssh://git@github.com/ConnectorGit/ioBroker.connector-local-control.git#af6ca3a95371ad333ec5e967fa33ce251bb87ad3)

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.connector-local-control.0: connector-local-control: iobroker                                 -  enabled
+ system.adapter.cul.0                    : cul                   : iobroker                                 -  enabled, port: 23
  system.adapter.devices.0                : devices               : iobroker                                 - disabled
+ system.adapter.echarts.0                : echarts               : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
+ system.adapter.followthesun.0           : followthesun          : iobroker                                 -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker                                 -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : iobroker                                 -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker                                 -  enabled, port: 12001
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker                                 -  enabled, port: 12010
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker                                 - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker                                 - disabled
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.jeelink.0                : jeelink               : iobroker                                 -  enabled
+ system.adapter.mhi-wfrac.0              : mhi-wfrac             : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.notification-manager.0   : notification-manager  : iobroker                                 -  enabled
+ system.adapter.nut.0                    : nut                   : iobroker                                 -  enabled
+ system.adapter.onvif.0                  : onvif                 : iobroker                                 -  enabled, port: 80, 7575, 8000, 8080, 8081, 8899
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
+ system.adapter.reolink.0                : reolink               : iobroker                                 -  enabled
+ system.adapter.reolink.1                : reolink               : iobroker                                 -  enabled
+ system.adapter.reolink.2                : reolink               : iobroker                                 -  enabled
+ system.adapter.reolink.3                : reolink               : iobroker                                 -  enabled
+ system.adapter.reolink.4                : reolink               : iobroker                                 -  enabled
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.statistics.0             : statistics            : iobroker                                 -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: iobroker                                 -  enabled
  system.adapter.vis-2-widgets-energy.0   : vis-2-widgets-energy  : iobroker                                 - disabled
  system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: iobroker                                 - disabled
  system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker                                 - disabled
+ system.adapter.vis-2.0                  : vis-2                 : iobroker                                 -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker                                 - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.worx.0                   : worx                  : iobroker                                 -  enabled
+ system.adapter.ws.0                     : ws                    : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : iobroker                                 -  enabled
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.178.75:6638

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.cul.0                    : cul                   : iobroker                                 -  enabled, port: 23
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker                                 -  enabled, port: 12001
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker                                 -  enabled, port: 12010
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.onvif.0                  : onvif                 : iobroker                                 -  enabled, port: 80, 7575, 8000, 8080, 8081, 8899
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.178.75:6638

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.6.17   , installed 7.6.17
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "cul"          : 2.2.0    , installed 2.2.0
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "followthesun" : 0.5.2    , installed 0.5.2
Adapter    "fullybrowser" : 3.1.2    , installed 3.1.2
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Adapter    "jeelink"      : 1.2.5    , installed 1.2.5
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "mhi-wfrac"    : 2.1.7    , installed 2.1.7
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "notification-manager": 1.3.0, installed 1.3.0
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "onvif"        : 1.1.4    , installed 1.1.4
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "reolink"      : 1.2.3    , installed 1.2.3
Adapter    "shelly"       : 10.1.0   , installed 10.1.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "vis-2"        : 2.12.12  , installed 2.12.12
Adapter    "vis-2-widgets-collection": 1.8.1, installed 1.8.1
Adapter    "vis-2-widgets-energy": 1.0.2, installed 1.0.2
Adapter    "vis-2-widgets-inventwo": 0.2.2, installed 0.2.2
Adapter    "vis-2-widgets-material": 1.4.10, installed 1.4.10
Adapter    "vis-icontwo"  : 1.12.0   , installed 1.12.0
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "worx"         : 3.2.6    , installed 3.2.6
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "yr"           : 5.3.0    , installed 5.3.0
Adapter    "zigbee"       : 2.0.5    , installed 2.0.5

Objects and States
Please stand by - This may take a while
Objects: 	14416
States: 	11412

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 https://apt.grafana.com stable InRelease
Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 http://deb.debian.org/debian bookworm-updates InRelease
Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease
Hit:8 https://apt.debmatic.de/debmatic stable InRelease
Reading package lists...
Pending Updates: 16

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:32001           0.0.0.0:*               LISTEN      0          9268       1289/rfd            
tcp        0      0 127.0.0.1:12001         0.0.0.0:*               LISTEN      1001       7805       1771/io.hm-rpc.0    
tcp        0      0 127.0.0.1:12010         0.0.0.0:*               LISTEN      1001       9733       1792/io.hm-rpc.1    
tcp        0      0 0.0.0.0:31999           0.0.0.0:*               LISTEN      0          7607       1575/ReGaHss.normal 
tcp        0      0 0.0.0.0:8183            0.0.0.0:*               LISTEN      0          8734       1575/ReGaHss.normal 
tcp        0      0 0.0.0.0:8181            0.0.0.0:*               LISTEN      0          7208       1119/lighttpd       
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       8618       1335/iobroker.js-co 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       8613       1335/iobroker.js-co 
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          7207       1119/lighttpd       
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1002       894/sshd: /usr/sbin 
tcp        0      0 0.0.0.0:9292            0.0.0.0:*               LISTEN      0          7214       1119/lighttpd       
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       9754       1808/io.mqtt.0      
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       10577      1856/io.shelly.0    
tcp        0      0 127.0.0.1:30080         0.0.0.0:*               LISTEN      0          6107       1224/lighttpd       
tcp        0      0 0.0.0.0:2010            0.0.0.0:*               LISTEN      0          7212       1119/lighttpd       
tcp        0      0 0.0.0.0:2001            0.0.0.0:*               LISTEN      0          7216       1119/lighttpd       
tcp        0      0 0.0.0.0:2000            0.0.0.0:*               LISTEN      0          7218       1119/lighttpd       
tcp        0      0 0.0.0.0:1999            0.0.0.0:*               LISTEN      0          7210       1119/lighttpd       
tcp6       0      0 :::39292                :::*                    LISTEN      0          10270      1330/java           
tcp6       0      0 :::3000                 :::*                    LISTEN      106        9375       1333/grafana        
tcp6       0      0 :::32010                :::*                    LISTEN      0          7158       1330/java           
tcp6       0      0 :::8181                 :::*                    LISTEN      0          7209       1119/lighttpd       
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       10106      2102/io.web.0       
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       8660       1446/io.admin.0     
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       11586      2117/io.ws.0        
tcp6       0      0 :::8086                 :::*                    LISTEN      999        9280       1076/influxd        
tcp6       0      0 :::80                   :::*                    LISTEN      0          7206       1119/lighttpd       
tcp6       0      0 :::22                   :::*                    LISTEN      0          1004       894/sshd: /usr/sbin 
tcp6       0      0 :::9294                 :::*                    LISTEN      0          7465       1330/java           
tcp6       0      0 :::9293                 :::*                    LISTEN      0          7464       1330/java           
tcp6       0      0 :::9292                 :::*                    LISTEN      0          7215       1119/lighttpd       
tcp6       0      0 :::2010                 :::*                    LISTEN      0          7213       1119/lighttpd       
tcp6       0      0 :::2001                 :::*                    LISTEN      0          7217       1119/lighttpd       
tcp6       0      0 :::2000                 :::*                    LISTEN      0          7219       1119/lighttpd       
tcp6       0      0 :::1999                 :::*                    LISTEN      0          7211       1119/lighttpd       
tcp6       0      0 :::18075                :::*                    LISTEN      1001       9688       1729/io.fullybrowse 
udp        0      0 0.0.0.0:32101           0.0.0.0:*                           1001       11283      1950/io.connector-l 
udp        0      0 0.0.0.0:52923           0.0.0.0:*                           104        6378       720/avahi-daemon: r 
udp        0      0 127.0.0.1:8182          0.0.0.0:*                           0          6106       1199/hss_led        
udp        0      0 0.0.0.0:33941           0.0.0.0:*                           0          9269       1289/rfd            
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        6376       720/avahi-daemon: r 
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           0          1996       1179/ssdpd          
udp        0      0 127.0.0.1:1998          0.0.0.0:*                           0          10305      1575/ReGaHss.normal 
udp        0      0 0.0.0.0:43439           0.0.0.0:*                           0          6059       1175/eq3configd     
udp6       0      0 fe80::c317:5c0b:740:546 :::*                                0          6536       851/NetworkManager  
udp6       0      0 :::5353                 :::*                                104        6377       720/avahi-daemon: r 
udp6       0      0 :::38399                :::*                                104        6379       720/avahi-daemon: r 
udp6       0      0 :::42804                :::*                                0          8612       1330/java           

*** Log File - Last 25 Lines ***

2025-08-29 17:24:57.458  - info: reolink.3 (2147) Changed state: EmailNotification
2025-08-29 17:24:57.459  - error: reolink.3 (2147) Set mail notification: Value not supported!
2025-08-29 17:24:59.107  - info: host.iobroker instance system.adapter.reolink.4 in version "1.2.3" started with pid 2197
2025-08-29 17:25:00.110  - info: reolink.4 (2197) starting. Version 1.2.3 in /opt/iobroker/node_modules/iobroker.reolink, node: v22.18.0, js-controller: 7.0.7
2025-08-29 17:25:00.120  - info: reolink.4 (2197) Reolink adapter has started
2025-08-29 17:25:00.121  - info: reolink.4 (2197) Current IP: 192.168.178.80
2025-08-29 17:25:01.219  - info: reolink.4 (2197) State value to set for "reolink.4.settings.EmailNotification" has to be type "number" but received type "string" 
2025-08-29 17:25:01.261  - info: reolink.4 (2197) Changed state: EmailNotification
2025-08-29 17:25:01.261  - error: reolink.4 (2197) Set mail notification: Value not supported!
2025-08-29 17:25:03.088  - info: host.iobroker instance system.adapter.mhi-wfrac.0 in version "2.1.7" started with pid 2212
2025-08-29 17:25:03.906  - info: mhi-wfrac.0 (2212) starting. Version 2.1.7 in /opt/iobroker/node_modules/iobroker.mhi-wfrac, node: v22.18.0, js-controller: 7.0.7
2025-08-29 17:25:05.762  - info: web.0 (2102) ==> Connected system.user.admin from ::ffff:192.168.178.58
2025-08-29 17:25:09.168  - info: web.0 (2102) ==> Connected system.user.admin from ::ffff:192.168.178.58
2025-08-29 17:25:37.966  - error: mhi-wfrac.0 (2212) Klimaanlage: Failed to register device! | Error: connect EHOSTUNREACH 192.168.178.31:51443
2025-08-29 17:27:23.147  - info: admin.0 (1446) ==> Connected system.user.admin from ::ffff:192.168.178.20
2025-08-29 17:27:31.484  - info: host.iobroker stopInstance system.adapter.mhi-wfrac.0 (force=false, process=true)
2025-08-29 17:27:31.488  - info: mhi-wfrac.0 (2212) Got terminate signal TERMINATE_YOURSELF
2025-08-29 17:27:31.489  - info: mhi-wfrac.0 (2212) terminating
2025-08-29 17:27:31.490  - info: mhi-wfrac.0 (2212) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-08-29 17:27:31.543  - info: host.iobroker stopInstance system.adapter.mhi-wfrac.0 send kill signal
2025-08-29 17:27:31.991  - info: mhi-wfrac.0 (2212) terminating
2025-08-29 17:27:32.031  - info: host.iobroker instance system.adapter.mhi-wfrac.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-08-29 17:27:35.364  - info: host.iobroker instance system.adapter.mhi-wfrac.0 in version "2.1.7" started with pid 3693
2025-08-29 17:27:36.215  - info: mhi-wfrac.0 (3693) starting. Version 2.1.7 in /opt/iobroker/node_modules/iobroker.mhi-wfrac, node: v22.18.0, js-controller: 7.0.7
2025-08-29 17:28:07.982  - error: mhi-wfrac.0 (3693) Klimaanlage: Failed to register device! | Error: connect EHOSTUNREACH 192.168.178.31:51443

============ Mark until here for C&P =============

[hotspot_2]

Bei mir hat auch alles soweit geklappt. Ich bekomme aber jetzt diese Warnungen beim apt update.

Warning: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
Warning: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Warning: Failed to fetch https://apt.grafana.com/dists/stable/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad:            The primary key is not live   because: Expired on 2025-08-23T16:33:45Z
Warning: Some index files failed to download. They have been ignored, or old ones used instead.

Kann / muss ich da was dagegen tun? Danke für eine Hilfe hierzu.

[Thomas Braun]

@iobroker2001 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Frage: Muss ich mir deshalb Gedanken machen?

Du solltest schauen, was 'Debmatic' zum Support von Debian13 'Trixie' sagt. Das ist ja relativ frisch, gut möglich, das Zeuch von Dritten noch nicht an das aktuelle Release angepasst wurden. Darauf deutet auch die Meldung mit "Ich konnte Debmatic danach auch nicht mehr manuell installieren, da irgendwie etwas in den Kernel-Headern fehlen würde." hin.
Denn auch ein auf Debian13 basierendes RaspberryOS 13 wurde ja noch nicht veröffentlicht, du hast also da jetzt eigentlich eine Beta-Version laufen.

2. Frage: Beim Update bekomme ich eine Warnung bzgl. der Debmatic-Signatur.
   Wie kann ich das beheben?

Einen aktuellen Schüssel einspielen, wenn es denn einen gibt.

Ist das gleiche 'Problem' wie bei @hotspot_2. Der muss den Grafana-Key neueinspielen.
Für nodesource gibt es aber z. B. noch keinen aktuellen.

Näheres hier:

https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind

[Nonixnarrez]

Moin zusammen!

Erst einmal vielen Dank für die sehr gute Anleitung von @Thomas-Braun.
Die hätte einige Zeitersparnis für mich bedeutet, so ich sie denn vorher gesucht/gefunden/gelesen hätte... :joy:

Na immerhin konnte ich mit den apt commands nochmal "nass hinterherwischen".
Trixie ist drauf, Sources sind umgestellt, Keys sind verlinkt/angepasst (soweit verfügbar).

Was mich nun etwas stutzig macht, ist das nodejs sich von v22.15.0 aus nicht mehr updaten lässt (-> v22.19.0), obwohl alle Sources m.M.n. soweit OK sind. Im CLI iob nodejs-update wird die neue nodejs v22.19.0 als verfügbar angezeigt, dann aber "erfolgreich" wieder die v22.15.0 drüber installiert.

Logfile:

ioBroker nodejs fixer 2025-08-09

Recommended nodejs-version is: 22.19.0
Checking your installation now. Please be patient!

Your current setup is:
/usr/bin/nodejs         v22.15.0
/usr/bin/node           v22.15.0
/usr/bin/npm            10.9.2
/usr/bin/npx            10.9.2
/usr/bin/corepack       0.32.0

We found these nodejs versions available for installation:

nodejs:
  Installed: 22.15.0-1nodesource1
  Candidate: 22.15.0-1nodesource1
  Version table:
 *** 22.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     22.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.4.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     20.19.2+dfsg-1 500
        500 https://deb.debian.org/debian trixie/main armhf Packages

Nothing to do - Your installation is using the correct paths.

You are running nodejs v22.15.0. Do you want to install recommended version 22.19.0?

Press <y> to continue or any other key to quit
Trying to fix your installation now. Please be patient.
rm: cannot remove '/etc/apt/keyrings/nodesource.gpg 2> /dev/null': No such file or directory
Stopping ioBroker now
######
ioBroker has been stopped

Removing dfsg-nodejs

*** These repos are active on your system:
Hit:1 https://deb.debian.org/debian trixie InRelease
Hit:2 https://deb.debian.org/debian trixie-updates InRelease
Hit:3 https://deb.debian.org/debian-security trixie-security InRelease
Hit:4 https://apt.grafana.com stable InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://dl.yarnpkg.com/debian stable InRelease
Hit:7 http://archive.raspberrypi.org/debian trixie InRelease
Reading package lists... Done
W: https://dl.yarnpkg.com/debian/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details
W: http://archive.raspberrypi.org/debian/dists/trixie/InRelease: Policy will reject signature within a year, see --audit for details

*** Installing ca-certificates, curl and gnupg, just in case they are missing.

*** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source

deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_22.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001

*** These repos are active after the adjustments:
Hit:1 https://apt.grafana.com stable InRelease
Hit:2 https://deb.debian.org/debian trixie InRelease
Hit:3 https://deb.debian.org/debian trixie-updates InRelease
Hit:4 https://deb.debian.org/debian-security trixie-security InRelease
Hit:5 http://archive.raspberrypi.org/debian trixie InRelease
Hit:6 https://repos.influxdata.com/debian stable InRelease
Hit:7 https://dl.yarnpkg.com/debian stable InRelease
Get:8 https://deb.nodesource.com/node_22.x nodistro InRelease [12.1 kB]
Get:9 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages [6705 B]
Fetched 18.8 kB in 1s (28.7 kB/s)
Reading package lists... Done
W: http://archive.raspberrypi.org/debian/dists/trixie/InRelease: Policy will reject signature within a year, see --audit for details
W: https://dl.yarnpkg.com/debian/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details

Installing nodejs now!

Installing latest nodejs v22 release
W: http://archive.raspberrypi.org/debian/dists/trixie/InRelease: Policy will reject signature within a year, see --audit for details
W: https://dl.yarnpkg.com/debian/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details

SUCCESS!
v22.15.0 has been installed! You are using the latest nodejs@22 release now!

COMPATIBILITY CHECK IN PROGRESS (Only a --dry-run! No modules are really changed or added!)
add fsevents 2.3.3
add @img/sharp-win32-x64 0.34.3
add @img/sharp-win32-ia32 0.34.3
add @img/sharp-win32-arm64 0.34.3
add @img/sharp-wasm32 0.34.3
add @img/sharp-linuxmusl-x64 0.34.3
add @img/sharp-linuxmusl-arm64 0.34.3
add @img/sharp-linux-x64 0.34.3
add @img/sharp-linux-s390x 0.34.3
add @img/sharp-linux-ppc64 0.34.3
add @img/sharp-linux-arm64 0.34.3
add @img/sharp-libvips-linuxmusl-x64 1.2.0
add @img/sharp-libvips-linuxmusl-arm64 1.2.0
add @img/sharp-libvips-linux-x64 1.2.0
add @img/sharp-libvips-linux-s390x 1.2.0
add @img/sharp-libvips-linux-ppc64 1.2.0
add @img/sharp-libvips-linux-arm64 1.2.0
add @img/sharp-libvips-darwin-x64 1.2.0
add @img/sharp-libvips-darwin-arm64 1.2.0
add @img/sharp-darwin-x64 0.34.3
add @img/sharp-darwin-arm64 0.34.3
add @ffprobe-installer/win32-x64 5.1.0
add @ffprobe-installer/win32-ia32 5.1.0
add @ffprobe-installer/linux-x64 5.2.0
add @ffprobe-installer/linux-ia32 5.2.0
add @ffprobe-installer/linux-arm64 5.2.0
add @ffprobe-installer/darwin-x64 5.1.0
add @ffprobe-installer/darwin-arm64 5.0.1
add @ffmpeg-installer/win32-x64 4.1.0
add @ffmpeg-installer/win32-ia32 4.1.0
add @ffmpeg-installer/linux-x64 4.1.0
add @ffmpeg-installer/linux-ia32 4.1.0
add @ffmpeg-installer/linux-arm64 4.1.4
add @ffmpeg-installer/darwin-x64 4.1.0
add @ffmpeg-installer/darwin-arm64 4.1.5
add @emnapi/runtime 1.4.4
add tslib 2.8.1

added 37 packages in 9s

165 packages are looking for funding
  run `npm fund` for details


We tried our best to fix your nodejs. Please run iob diag again to verify.

*** RESTARTING ioBroker NOW! ***
 Please refresh or restart your browser in a few moments.
pi@raspberrypi: $

Hat jemand einen Tipp für mich, wie ich das hinbiegen kann?

Gruß - Noni

[Thomas Braun]

@nonixnarrez sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Hat jemand einen Tipp für mich, wie ich das hinbiegen kann?

In dem du ein reines 64Bit-System fährst. Dein 32Bit-armhf wird ganz offenbar nicht mehr vollkommen unterstützt.

[Nonixnarrez]

@thomas-braun Danke für die schnelle Antwort.

Ich bin mir eigentlich ziemlich sicher, dass ich (damals) ein 64bit Raspberry Pi OS Bullseye (v11) installiert habe.

pi@raspberrypi:/ $ uname -a
Linux raspberrypi 6.12.43-v8+ #1901 SMP PREEMPT Tue Aug 26 16:51:52 BST 2025 aarch64 GNU/Linux

Also nix mehr mit hinbiegen - nur Neuinstallation? :confounded:

Gruß - Noni

[Thomas Braun]

@nonixnarrez sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Ich bin mir eigentlich ziemlich sicher, dass ich (damals) ein 64bit Raspberry Pi OS Bullseye (v11) installiert habe.

Und ich bin mir ziemlich sicher, dass du da höchstens einen 64Bit-Kernel hast, der Rest aber 32-bittig ist.
In iob diag steht es ganz am Anfang drin.
Und inline-Upgrades von 11 auf 12 funktionierten auch nicht richtig.

Kannste nur per Neuinstallation richtig gerade biegen.

[Nonixnarrez]

@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

@nonixnarrez sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Ich bin mir eigentlich ziemlich sicher, dass ich (damals) ein 64bit Raspberry Pi OS Bullseye (v11) installiert habe.

Und ich bin mir ziemlich sicher, dass du da höchstens einen 64Bit-Kernel hast, der Rest aber 32-bittig ist.
In iob diag steht es ganz am Anfang drin.
Und inline-Upgrades von 11 auf 12 funktionierten auch nicht richtig.

Kannste nur per Neuinstallation richtig gerade biegen.

Yup! Recht hat er (leider)!

Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: raspberrypi
       Icon name: computer
          Kernel: Linux 6.12.43-v8+
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 32 bit

Herzlichen Glückwunsch - da habe ich wohl gerade eine Neuinstallation gewonnen! :grin:

Danke für den Support.

Gruß - Noni

[Thomas Braun]

@nonixnarrez sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Yup! Recht hat er (leider)!

Was soll ich jetzt sagen? Außer: Natürlich hab ich Recht! :-D

[hotspot_2]

@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Ist das gleiche 'Problem' wie bei @hotspot_2. Der muss den Grafana-Key neueinspielen.
Für nodesource gibt es aber z. B. noch keinen aktuellen.

Das heißt im Moment kann ich gegen diese Warnungen (noch) nichts machen. Der Grafana Key kann mit dem Kommandos aus deinem Thread (Link) erneuert werden sobald es einen gibt, oder?

[Thomas Braun]

@hotspot_2

Der Grafana-Key ist aktualisiert worden.
Kann mit den Kommandos von dort eingespielt werden.