Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[bahnuhr]

@dirkhe
Danke für die Info.

Schade wäre halt, wenn die map zukünftig nicht mehr funktionieren würde.
Und auch der grundsätzliche login am Anfang bei Installation der Instanz dürfte dann auch nicht mehr funktionieren.

@dirkhe sagte in mihome vacuum - login failed:

Also auf 2fa werde ich das nicht umprogrammieren,

Hier müsste es doch Adapter geben die das schon umgesetzt haben. Kann man sich da Hilfe holen ?

[dirkhe]

Update.

Ich denke, ich habe es jetzt wieder hinbekommen, habe aber bis jetzt nur Fragmente. Als nächstes muss ich das alles wieder in den Adapter zusammenbauen....

Ich habe jetzt schon 2 Urlaubstage damit verbaselt, weiss nicht, ob ich es diese Woche noch fertig bekomme.Aber ich denke, dann gibt es ja Hoffnung..

[dirkhe]

Hallo zusammen,

auf github gibt es jetzt eine neue Version, bitte mal testen.
Ich habe es zwar nicht hinbekommen, das captcha zu lösen, weil er irgendwie nicht dieselbe Session nutzten will, aber ich habe generell den Agent dynamisch geändert und jetzt bekomme ich halt gar keine captcha Frage mehr.
Falls es aber eine captcha Abfrage oder eine 2fa Anfrage gibt, wird es entsprechend geloggt.

Karte geht auch wieder

[bahnuhr]

@dirkhe
vor dem map log kommt weiterhin failed:

mihome-vacuum.0
2025-07-24 17:21:11.983	info	create states for mop

mihome-vacuum.0
2025-07-24 17:21:11.735	warn	Login failed

Nachtrag:
get devices in der Instanz geht nicht; es kommt weiterhin "error login"

[Thomas Braun]

@bahnuhr @dirkhe
Kann ich bestätigen, get devices funktioniert nicht.
Map wohl auch nicht, kann ich aber nicht richtig testen, da keine vis.
Debug sagt:

2025-07-24 17:43:13.090  - info: mihome-vacuum.0 (168226) starting. Version 5.2.0 (non-npm: iobroker-community-adapters/ioBroker.mihome-vacuum) in /opt/iobroker/node_modules/iobroker.mihome-vacuum, node: v24.4.1, js-controller: 7.0.7
2025-07-24 17:43:13.144  - debug: mihome-vacuum.0 (168226) Create State for deviceInfo
2025-07-24 17:43:13.145  - debug: mihome-vacuum.0 (168226) Create State for deviceInfomac
2025-07-24 17:43:13.145  - debug: mihome-vacuum.0 (168226) Create State for deviceInfomodel
2025-07-24 17:43:13.146  - debug: mihome-vacuum.0 (168226) Create State for deviceInfofw_ver
2025-07-24 17:43:13.147  - debug: mihome-vacuum.0 (168226) Create State for deviceInfowifi_signal
2025-07-24 17:43:13.147  - debug: mihome-vacuum.0 (168226) Create State for deviceInfounsupported
2025-07-24 17:43:13.149  - debug: mihome-vacuum.0 (168226) MIIO: Config: ip:192.168.178.23 token: 753955485aXXXXXXXXX
2025-07-24 17:43:13.154  - info: mihome-vacuum.0 (168226) IOT enabled, create state
2025-07-24 17:43:13.157  - debug: mihome-vacuum.0 (168226) server started on 0.0.0.0:53421
2025-07-24 17:43:13.171  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c689568825491ffffffffffffffffffffffffffffffff
2025-07-24 17:43:13.172  - debug: mihome-vacuum.0 (168226) MAIN: Connected to device, try to get model..
2025-07-24 17:43:13.177  - debug: mihome-vacuum.0 (168226) your device is not connected, but this could be temporary
2025-07-24 17:43:13.179  - debug: mihome-vacuum.0 (168226) GETMODELFROMAPI:Data: {}
2025-07-24 17:43:13.179  - debug: mihome-vacuum.0 (168226) Get Device data..0
2025-07-24 17:43:13.181  - debug: mihome-vacuum.0 (168226) Message= {"id":1,"method":"miIO.info"}
2025-07-24 17:43:13.193  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"partner_id":"","id":1,"code":0,"message":"ok","result":{"hw_ver":"Linux","fw_ver":"3.5.8_004028","ap":{"ssid":"WLana-del-Rey","bssid":"1C:ED:6F:57:F0:44","rssi":-52},"netif":{"localIp":"192.168.178.23","mask":"255.255.255.0","gw":"192.168.178.1"},"miio_ver":"miio-client 3.5.8","model":"rockrobo.vacuum.v1","mac":"78:11:DC:7E:2A:27","token":"753955485aXXXXXXXXX","life":51120}}
2025-07-24 17:43:13.194  - debug: mihome-vacuum.0 (168226) GETMODELFROMAPI:Data: {"partner_id":"","id":1,"code":0,"message":"ok","result":{"hw_ver":"Linux","fw_ver":"3.5.8_004028","ap":{"ssid":"WLana-del-Rey","bssid":"1C:ED:6F:57:F0:44","rssi":-52},"netif":{"localIp":"192.168.178.23","mask":"255.255.255.0","gw":"192.168.178.1"},"miio_ver":"miio-client 3.5.8","model":"rockrobo.vacuum.v1","mac":"78:11:DC:7E:2A:27","token":"753955485aXXXXXX":51120}}
2025-07-24 17:43:13.195  - debug: mihome-vacuum.0 (168226) Get Device data..1
2025-07-24 17:43:13.195  - debug: mihome-vacuum.0 (168226) Get Device data from robot.. {"hw_ver":"Linux","fw_ver":"3.5.8_004028","ap":{"ssid":"WLana-del-Rey","bssid":"1C:ED:6F:57:F0:44","rssi":-52},"netif":{"localIp":"192.168.178.23","mask":"255.255.255.0","gw":"192.168.178.1"},"miio_ver":"miio-client 3.5.8","model":"rockrobo.vacuum.v1","mac":"78:11:DC:7E:2A:27","token":"753955485aXXXXXX":51120}
2025-07-24 17:43:13.288  - debug: mihome-vacuum.0 (168226) DeviceModel set to: rockrobo.vacuum.v1
2025-07-24 17:43:13.319  - debug: mihome-vacuum.0 (168226) load Map creator... true
2025-07-24 17:43:13.323  - info: mihome-vacuum.0 (168226) select standard vacuum protocol....
2025-07-24 17:43:13.330  - debug: mihome-vacuum.0 (168226) CloudApi-Login gestartet…
2025-07-24 17:43:13.331  - debug: mihome-vacuum.0 (168226) CloudApi-CloudApi-Step 1: Getting sign token
2025-07-24 17:43:13.529  - debug: mihome-vacuum.0 (168226) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-07-24 17:43:13.660  - debug: mihome-vacuum.0 (168226) CloudApi-Step 2: Authenticating user
2025-07-24 17:43:13.794  - debug: mihome-vacuum.0 (168226) CloudApi-Step 3: Fetching service token
2025-07-24 17:43:13.967  - debug: mihome-vacuum.0 (168226) CloudApi-Login erfolgreich!
2025-07-24 17:43:14.066  - info: mihome-vacuum.0 (168226) settest next timer: not available
2025-07-24 17:43:14.150  - debug: mihome-vacuum.0 (168226) Create State for control: {"id":"mihome-vacuum.0.control"}
2025-07-24 17:43:14.400  - debug: mihome-vacuum.0 (168226) Create State for Queue: queue
2025-07-24 17:43:14.478  - debug: mihome-vacuum.0 (168226) Create State for map: 
2025-07-24 17:43:14.521  - debug: mihome-vacuum.0 (168226) Create State for map: map64
2025-07-24 17:43:14.522  - debug: mihome-vacuum.0 (168226) Create State for map: actualMap
2025-07-24 17:43:14.523  - debug: mihome-vacuum.0 (168226) Create State for map: mapStatus
2025-07-24 17:43:14.525  - debug: mihome-vacuum.0 (168226) Create State for map: mapURL
2025-07-24 17:43:14.525  - debug: mihome-vacuum.0 (168226) Create State for map: loadMap
2025-07-24 17:43:14.526  - debug: mihome-vacuum.0 (168226) Create State done!
2025-07-24 17:43:14.527  - debug: mihome-vacuum.0 (168226) get params for stock Vacuum
2025-07-24 17:43:14.528  - debug: mihome-vacuum.0 (168226) Message= {"id":2,"method":"get_status"}
2025-07-24 17:43:14.536  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"msg_ver":8,"msg_seq":889,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":1,"in_cleaning":0,"fan_power":60,"dnd_enabled":0}],"id":2}
2025-07-24 17:43:14.537  - debug: mihome-vacuum.0 (168226) setGetStatus {"msg_ver":8,"msg_seq":889,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":true,"in_cleaning":false,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2025-07-24 17:43:14.691  - debug: mihome-vacuum.0 (168226) Message= {"id":3,"method":"get_map_v1"}
2025-07-24 17:43:14.699  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":["retry"],"id":3}
2025-07-24 17:43:15.001  - debug: mihome-vacuum.0 (168226) Message= {"id":4,"method":"get_map_v1"}
2025-07-24 17:43:17.003  - debug: mihome-vacuum.0 (168226) your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes
2025-07-24 17:43:17.305  - debug: mihome-vacuum.0 (168226) Message= {"id":5,"method":"get_map_v1"}
2025-07-24 17:43:17.313  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":["roboroommap%2F74213525%2F2"],"id":5}
2025-07-24 17:43:17.313  - debug: mihome-vacuum.0 (168226) Mappointer_updated
2025-07-24 17:43:17.315  - debug: mihome-vacuum.0 (168226) update_Map Mimap enabled
2025-07-24 17:43:17.315  - debug: mihome-vacuum.0 (168226) update_Map need new mapurl
2025-07-24 17:43:17.321  - debug: mihome-vacuum.0 (168226) CloudApi-call: https://api.io.mi.com/app/home/getmapfileurl with {"data":"{\"obj_name\":\"roboroommap%2F74213525%2F2\"}"}
2025-07-24 17:43:17.328  - debug: mihome-vacuum.0 (168226) Message= {"id":6,"method":"get_room_mapping"}
2025-07-24 17:43:17.337  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":"unknown_method","id":6}
2025-07-24 17:43:17.340  - debug: mihome-vacuum.0 (168226) Message= {"id":7,"method":"get_consumable"}
2025-07-24 17:43:17.342  - debug: mihome-vacuum.0 (168226) Message= {"id":8,"method":"get_network_info"}
2025-07-24 17:43:17.349  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"main_brush_work_time":1320,"side_brush_work_time":330828,"filter_work_time":1320,"sensor_dirty_time":1343}],"id":7}
2025-07-24 17:43:17.351  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":"unknown_method","id":8}
2025-07-24 17:43:17.352  - debug: mihome-vacuum.0 (168226) Message= {"id":9,"method":"get_sound_volume"}
2025-07-24 17:43:17.358  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[90],"id":9}
2025-07-24 17:43:17.360  - debug: mihome-vacuum.0 (168226) Message= {"id":10,"method":"get_multi_maps_list"}
2025-07-24 17:43:17.368  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":"unknown_method","id":10}
2025-07-24 17:43:17.369  - debug: mihome-vacuum.0 (168226) Startup: getMultiMapsList Answer: true
2025-07-24 17:43:17.370  - debug: mihome-vacuum.0 (168226) Startup: Delete getMultiMapsList
2025-07-24 17:43:17.371  - debug: mihome-vacuum.0 (168226) Message= {"id":11,"method":"get_clean_summary"}
2025-07-24 17:43:17.386  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[330035,4140217500,288,[]],"id":11}
2025-07-24 17:43:17.388  - debug: mihome-vacuum.0 (168226) Startup: setGetCleanSummary Answer: true
2025-07-24 17:43:17.389  - debug: mihome-vacuum.0 (168226) Startup: Delete setGetCleanSummary
2025-07-24 17:43:17.389  - debug: mihome-vacuum.0 (168226) Message= {"id":12,"method":"get_consumable"}
2025-07-24 17:43:17.399  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"main_brush_work_time":1320,"side_brush_work_time":330828,"filter_work_time":1320,"sensor_dirty_time":1343}],"id":12}
2025-07-24 17:43:17.400  - debug: mihome-vacuum.0 (168226) Startup: setGetConsumable Answer: true
2025-07-24 17:43:17.401  - debug: mihome-vacuum.0 (168226) Startup: Delete setGetConsumable
2025-07-24 17:43:17.402  - debug: mihome-vacuum.0 (168226) Message= {"id":13,"method":"get_carpet_mode"}
2025-07-24 17:43:17.411  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"enable":0,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":13}
2025-07-24 17:43:17.412  - info: mihome-vacuum.0 (168226) create state for carpet_mode
2025-07-24 17:43:17.413  - debug: mihome-vacuum.0 (168226) Message= {"id":14,"method":"get_carpet_mode"}
2025-07-24 17:43:17.498  - debug: mihome-vacuum.0 (168226) Message= {"id":15,"method":"get_clean_summary"}
2025-07-24 17:43:19.200  - debug: mihome-vacuum.0 (168226) CloudApi-get {"code":0,"message":"ok","result":{"url":"https://cnbj2.fds.api.xiaomi.com/robomap/roboroommap/74213525/2?Expires=1753373599000&GalaxyAccessKeyId=5ZIFFERN5&Signature=ERSETZT=","obj_name":"roboroommap/74213525/2","method":"GET","expires_time":1753373599,"ok":true}}
2025-07-24 17:43:19.202  - debug: mihome-vacuum.0 (168226) update_Map got new url:https://cnbj2.fds.api.xiaomi.com/robomap/roboroommap/74213525/2?Expires=1753373599000&GalaxyAccessKeyId=5ZIFFERN5&Signature=ERSETZT=
2025-07-24 17:43:19.203  - debug: mihome-vacuum.0 (168226) update_Map got new expires:1753373599
2025-07-24 17:43:19.204  - debug: mihome-vacuum.0 (168226) update_Map got new time:1753371797
2025-07-24 17:43:19.415  - debug: mihome-vacuum.0 (168226) your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes
2025-07-24 17:43:19.501  - debug: mihome-vacuum.0 (168226) your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes
2025-07-24 17:43:19.657  - debug: mihome-vacuum.0 (168226) creating map
2025-07-24 17:43:23.181  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c68956882549bffffffffffffffffffffffffffffffff
2025-07-24 17:43:33.185  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254a5ffffffffffffffffffffffffffffffff
2025-07-24 17:43:43.190  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254afffffffffffffffffffffffffffffffff
2025-07-24 17:43:53.193  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254b9ffffffffffffffffffffffffffffffff
2025-07-24 17:44:03.196  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254c3ffffffffffffffffffffffffffffffff
2025-07-24 17:44:13.201  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254cdffffffffffffffffffffffffffffffff
2025-07-24 17:44:20.417  - debug: mihome-vacuum.0 (168226) get params for stock Vacuum
2025-07-24 17:44:20.418  - debug: mihome-vacuum.0 (168226) Message= {"id":16,"method":"get_status"}
2025-07-24 17:44:22.420  - debug: mihome-vacuum.0 (168226) your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes
2025-07-24 17:44:22.420  - debug: mihome-vacuum.0 (168226) Message= {"id":17,"method":"get_network_info"}
2025-07-24 17:44:23.204  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254d7ffffffffffffffffffffffffffffffff
2025-07-24 17:44:24.421  - debug: mihome-vacuum.0 (168226) your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes
2025-07-24 17:44:24.422  - debug: mihome-vacuum.0 (168226) Message= {"id":18,"method":"get_sound_volume"}
2025-07-24 17:44:26.423  - debug: mihome-vacuum.0 (168226) your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes
2025-07-24 17:44:26.424  - debug: mihome-vacuum.0 (168226) Message= {"id":19,"method":"get_carpet_mode"}
2025-07-24 17:44:26.432  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"enable":0,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":19}
2025-07-24 17:44:33.208  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254e1ffffffffffffffffffffffffffffffff
2025-07-24 17:44:43.212  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254ebffffffffffffffffffffffffffffffff
2025-07-24 17:44:53.214  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254f5ffffffffffffffffffffffffffffffff
2025-07-24 17:45:03.220  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c6895688254ffffffffffffffffffffffffffffffffff
2025-07-24 17:45:13.226  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c689568825509ffffffffffffffffffffffffffffffff
2025-07-24 17:45:23.233  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c689568825513ffffffffffffffffffffffffffffffff
2025-07-24 17:45:27.486  - debug: mihome-vacuum.0 (168226) get params for stock Vacuum
2025-07-24 17:45:27.487  - debug: mihome-vacuum.0 (168226) Message= {"id":20,"method":"get_status"}
2025-07-24 17:45:27.496  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"msg_ver":8,"msg_seq":890,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":1,"in_cleaning":0,"fan_power":60,"dnd_enabled":0}],"id":20}
2025-07-24 17:45:27.497  - debug: mihome-vacuum.0 (168226) setGetStatus {"msg_ver":8,"msg_seq":890,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":true,"in_cleaning":false,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2025-07-24 17:45:27.499  - debug: mihome-vacuum.0 (168226) Message= {"id":21,"method":"get_network_info"}
2025-07-24 17:45:27.505  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":"unknown_method","id":21}
2025-07-24 17:45:27.506  - debug: mihome-vacuum.0 (168226) Message= {"id":22,"method":"get_sound_volume"}
2025-07-24 17:45:27.514  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[90],"id":22}
2025-07-24 17:45:27.515  - debug: mihome-vacuum.0 (168226) Message= {"id":23,"method":"get_carpet_mode"}
2025-07-24 17:45:27.644  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"enable":0,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":23}
2025-07-24 17:45:33.238  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c68956882551dffffffffffffffffffffffffffffffff
2025-07-24 17:45:43.241  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c689568825527ffffffffffffffffffffffffffffffff
2025-07-24 17:45:53.249  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c689568825531ffffffffffffffffffffffffffffffff
2025-07-24 17:46:03.254  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c68956882553bffffffffffffffffffffffffffffffff
2025-07-24 17:46:13.256  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c689568825545ffffffffffffffffffffffffffffffff
2025-07-24 17:46:23.261  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c68956882554fffffffffffffffffffffffffffffffff
2025-07-24 17:46:28.758  - debug: mihome-vacuum.0 (168226) get params for stock Vacuum
2025-07-24 17:46:28.759  - debug: mihome-vacuum.0 (168226) Message= {"id":24,"method":"get_status"}
2025-07-24 17:46:28.768  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"msg_ver":8,"msg_seq":915,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":1,"in_cleaning":0,"fan_power":60,"dnd_enabled":0}],"id":24}
2025-07-24 17:46:28.769  - debug: mihome-vacuum.0 (168226) setGetStatus {"msg_ver":8,"msg_seq":915,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":true,"in_cleaning":false,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2025-07-24 17:46:28.771  - debug: mihome-vacuum.0 (168226) Message= {"id":25,"method":"get_network_info"}
2025-07-24 17:46:28.782  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":"unknown_method","id":25}
2025-07-24 17:46:28.783  - debug: mihome-vacuum.0 (168226) Message= {"id":26,"method":"get_sound_volume"}
2025-07-24 17:46:28.947  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[90],"id":26}
2025-07-24 17:46:28.948  - debug: mihome-vacuum.0 (168226) Message= {"id":27,"method":"get_carpet_mode"}
2025-07-24 17:46:28.958  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"enable":0,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":27}
2025-07-24 17:46:33.267  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c689568825559ffffffffffffffffffffffffffffffff

Schaut aber für mich eigentlich sauber aus.

[dirkhe]

@thomas-braun Also in dem log sagt er ja, dass er die map aktualisiert hat. Wie sieht denn das log aus, wenn du get Devices drückst? Bitte auch mal schauen, ob der Browser keinen Fehler wirft

[Thomas Braun]

@dirkhe

Im Grunde passiert im Log nichts, wenn ich get devices anklicke:

2025-07-24 18:04:24.351  - debug: mihome-vacuum.0 (168226) discover__{}
2025-07-24 18:04:27.706  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c68956882598bffffffffffffffffffffffffffffffff
2025-07-24 18:04:37.709  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c689568825995ffffffffffffffffffffffffffffffff
2025-07-24 18:04:47.712  - debug: mihome-vacuum.0 (168226) Receive <<< Helo <<< 2131002000000000046c68956882599fffffffffffffffffffffffffffffffff
2025-07-24 18:04:56.642  - debug: mihome-vacuum.0 (168226) get params for stock Vacuum
2025-07-24 18:04:56.642  - debug: mihome-vacuum.0 (168226) Message= {"id":96,"method":"get_status"}
2025-07-24 18:04:56.648  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"msg_ver":8,"msg_seq":947,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":1,"in_cleaning":0,"fan_power":60,"dnd_enabled":0}],"id":96}
2025-07-24 18:04:56.649  - debug: mihome-vacuum.0 (168226) setGetStatus {"msg_ver":8,"msg_seq":947,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":true,"in_cleaning":false,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2025-07-24 18:04:56.650  - debug: mihome-vacuum.0 (168226) Message= {"id":97,"method":"get_network_info"}
2025-07-24 18:04:56.655  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":"unknown_method","id":97}
2025-07-24 18:04:56.656  - debug: mihome-vacuum.0 (168226) Message= {"id":98,"method":"get_sound_volume"}
2025-07-24 18:04:56.663  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[90],"id":98}
2025-07-24 18:04:56.664  - debug: mihome-vacuum.0 (168226) Message= {"id":99,"method":"get_carpet_mode"}
2025-07-24 18:04:56.674  - debug: mihome-vacuum.0 (168226) MIIO RECIVE: {"result":[{"enable":0,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":99}

Es wird nur die erste Zeile ausgeworfen:
2025-07-24 18:04:24.351 - debug: mihome-vacuum.0 (168226) discover__{}

[dirkhe]

@thomas-braun Das ist seltsam, denn es müssten im debug ja auch die Loginversuche auftauchen. Kannst du ggf. mla deinenen Browser refreshen?

[dirkhe]

Also ich habe den Adapter auch gerade im produktiven System installiert, bei mir funktioniert soweit alles. Da müssen wir dann mal sehen, wo es genau hakt bei euch

[Thomas Braun]

@dirkhe sagte in mihome vacuum - login failed:

Kannst du ggf. mla deinenen Browser refreshen?

Browser neugestartet, sieht aber exakt aus wie zuvor.

[dirkhe]

@thomas-braun Kanst du mal die Browser console aufmachen, ob er da irgendeinen Fehler wirft? Obwohl das bei der Anfrage zumindest komisch ist, er müsste da auf jeden Fall was loggen... Der discovery Eintrag kommt ja dann zum Schluß...

[dirkhe]

@thomas-braun Schau mal bitte in dein Log, die Einträge vorher. Die Einträge direkt vor dem discovery kommen von der Kommunikation mit dem Sauger selber, das kann sein, dass mdu da ein bisschen früher schauen muss.
Die Fangen alle mit CloudApi an

[Thomas Braun]

@dirkhe

2025-07-24 18:49:52.416  - debug: mihome-vacuum.0 (172290) CloudApi-Login gestartet…
2025-07-24 18:49:52.417  - debug: mihome-vacuum.0 (172290) CloudApi-CloudApi-Step 1: Getting sign token
2025-07-24 18:49:52.559  - debug: mihome-vacuum.0 (172290) CloudApi-Step 2: Authenticating user
2025-07-24 18:49:52.684  - debug: mihome-vacuum.0 (172290) CloudApi-Step 3: Fetching service token
2025-07-24 18:49:52.836  - debug: mihome-vacuum.0 (172290) CloudApi-Login erfolgreich!
2025-07-24 18:49:52.846  - debug: mihome-vacuum.0 (172290) CloudApi-call: https://-.api.io.mi.com/app/v2/homeroom/gethome with {"data":"{\"fg\":true,\"fetch_share\":true,\"fetch_share_dev\":true,\"limit\":300,\"app_ver\":7}"}
2025-07-24 18:49:52.995  - error: mihome-vacuum.0 (172290) CloudApi: executeEncryptedApiCall Error:
2025-07-24 18:49:52.996  - debug: mihome-vacuum.0 (172290) discover__{}
2025-07-24 18:49:55.667  - debug: mihome-vacuum.0 (172290) Receive <<< Helo <<< 2131002000000000046c689568826433ffffffffffffffffffffffffffffffff
2025-07-24 18:50:01.793  - debug: mihome-vacuum.0 (172290) get params for stock Vacuum
2025-07-24 18:50:01.794  - debug: mihome-vacuum.0 (172290) Message= {"id":10,"method":"get_status"}
2025-07-24 18:50:01.805  - debug: mihome-vacuum.0 (172290) MIIO RECIVE: {"result":[{"msg_ver":8,"msg_seq":991,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":1,"in_cleaning":0,"fan_power":60,"dnd_enabled":0}],"id":10}
2025-07-24 18:50:01.807  - debug: mihome-vacuum.0 (172290) setGetStatus {"msg_ver":8,"msg_seq":991,"state":8,"battery":100,"clean_time":0,"clean_area":0,"error_code":0,"map_present":true,"in_cleaning":false,"fan_power":60,"dnd_enabled":false,"error_text":"No error"}
2025-07-24 18:50:01.932  - debug: mihome-vacuum.0 (172290) Message= {"id":11,"method":"get_map_v1"}
2025-07-24 18:50:01.939  - debug: mihome-vacuum.0 (172290) MIIO RECIVE: {"result":["retry"],"id":11}
2025-07-24 18:50:02.242  - debug: mihome-vacuum.0 (172290) Message= {"id":12,"method":"get_map_v1"}
2025-07-24 18:50:02.250  - debug: mihome-vacuum.0 (172290) MIIO RECIVE: {"result":["retry"],"id":12}
2025-07-24 18:50:02.552  - debug: mihome-vacuum.0 (172290) Message= {"id":13,"method":"get_map_v1"}
2025-07-24 18:50:04.556  - debug: mihome-vacuum.0 (172290) your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes
2025-07-24 18:50:04.858  - debug: mihome-vacuum.0 (172290) Message= {"id":14,"method":"get_map_v1"}
2025-07-24 18:50:04.864  - debug: mihome-vacuum.0 (172290) MIIO RECIVE: {"result":["roboroommap%2F74213525%2F6"],"id":14}
2025-07-24 18:50:04.865  - debug: mihome-vacuum.0 (172290) Mappointer_updated
2025-07-24 18:50:04.869  - debug: mihome-vacuum.0 (172290) update_Map Mimap enabled
2025-07-24 18:50:04.870  - debug: mihome-vacuum.0 (172290) update_Map need new mapurl
2025-07-24 18:50:04.874  - debug: mihome-vacuum.0 (172290) CloudApi-call: https://api.io.mi.com/app/home/getmapfileurl with {"data":"{\"obj_name\":\"roboroommap%2F74213525%2F6\"}"}
2025-07-24 18:50:04.884  - debug: mihome-vacuum.0 (172290) Message= {"id":15,"method":"get_room_mapping"}
2025-07-24 18:50:04.894  - debug: mihome-vacuum.0 (172290) MIIO RECIVE: {"result":"unknown_method","id":15}
2025-07-24 18:50:04.896  - debug: mihome-vacuum.0 (172290) Message= {"id":16,"method":"get_consumable"}
2025-07-24 18:50:04.898  - debug: mihome-vacuum.0 (172290) Message= {"id":17,"method":"get_network_info"}

[dirkhe]

@thomas-braun ok, die entscheiden Zeile ist der executeEncryptedApiCall error, allerdings gibt er da nichts aus.
Kannst mal bitte direkt in Datei /ioBroker/iobroker.mihome-vacuum/lib/XiaomiCloudConnector.js gehen und bei folgender Zeile 304
aus err.message ein err machen, also das message wegmachen, bitte

[Thomas Braun]

@dirkhe

Gemacht, Zeile 304:

            this.logger.error('CloudApi: executeEncryptedApiCall Error:', err);

aber da steht nix drin:

2025-07-24 19:01:04.008  - debug: mihome-vacuum.0 (172612) CloudApi-Login gestartet…
2025-07-24 19:01:04.009  - debug: mihome-vacuum.0 (172612) CloudApi-CloudApi-Step 1: Getting sign token
2025-07-24 19:01:04.112  - debug: mihome-vacuum.0 (172612) CloudApi-Step 2: Authenticating user
2025-07-24 19:01:04.244  - debug: mihome-vacuum.0 (172612) CloudApi-Step 3: Fetching service token
2025-07-24 19:01:04.407  - debug: mihome-vacuum.0 (172612) CloudApi-Login erfolgreich!
2025-07-24 19:01:04.418  - debug: mihome-vacuum.0 (172612) CloudApi-call: https://-.api.io.mi.com/app/v2/homeroom/gethome with {"data":"{\"fg\":true,\"fetch_share\":true,\"fetch_share_dev\":true,\"limit\":300,\"app_ver\":7}"}
2025-07-24 19:01:04.590  - error: mihome-vacuum.0 (172612) CloudApi: executeEncryptedApiCall Error:
2025-07-24 19:01:04.591  - debug: mihome-vacuum.0 (172612) discover__{}

[dirkhe]

@thomas-braun Ach ich dummbacke, das muss so sein

this.logger.error(`CloudApi: executeEncryptedApiCall Error:${err.message}`);

[Thomas Braun]

@dirkhe

2025-07-24 19:15:21.641  - debug: mihome-vacuum.0 (1462) CloudApi-call: https://-.api.io.mi.com/app/v2/homeroom/gethome with {"data":"{\"fg\":true,\"fetch_share\":true,\"fetch_share_dev\":true,\"limit\":300,\"app_ver\":7}"}
2025-07-24 19:15:21.833  - error: mihome-vacuum.0 (1462) CloudApi: executeEncryptedApiCall Error:getaddrinfo ENOTFOUND -.api.io.mi.com
2025-07-24 19:15:21.834  - debug: mihome-vacuum.0 (1462) discover__{}

[Thomas Braun]

@thomas-braun sagte in mihome vacuum - login failed:

https://-.api.io.mi.com

Schaut für mich nach einer ungültigen URL aus.
Ich bin im übrigen auf dem chinesischen Server mit dem Sauger angemeldet. Falls das einen Unterschied macht.

[bahnuhr]

@dirkhe

so Rückinfo von mir.
Nochmal neu von git geholt.
login Fehler im log ist nun weg.

get devices geht auch; Sauger werden geholt.

Und die map geht auch wieder.

Vielen lieben Dank für deinen Ansatz und die Lösung.

Fazit:
Bei mir geht wieder alles.

(Anmerkung: Ich bin auf dem deutschen Server)

[dirkhe]

@thomas-braun stimmt, sehe den Fehler auch schon, Fix kommt gleich