Sungrow WR SGH10RT erfolgreich mit MODBUS eingebunden

Schneider

Hi, ich versuche mit obiger Anleitung einen SH20T anzubinden.
Bin MODBUS Neuling - bitte nicht steinigen ;-)

Ich bekomme die Register nicht reinkopiert. Was mach ich da falsch?

gmt94

Die ganzen Einsen sind falsch. Also zwischen Adress und Name, die müssen raus.

berlinerbolle

Falsch sind die Einsen nicht per se - ich würde empfehlen, die drin zu lassen. Dafür muss aber im Modbus Adapter in den Einstellungen "Multiple Device IDs" angehakt sein, sonst klappt es nicht.

Vorteil dabei: man kann die einzelnen Batteriewerte per Modbus auslesen, die Batterie hat eine eigene Modbus Adresse.

Siehe hier.

GombersIOB

@berlinerbolle
Zumindest ist offensichtlich, dass die Tabelle derzeit nicht zu den Überschriften passt. Ob es eine Einstellung gibt, die der Tabelle eine weitere Spalte hinzufügt, weiß ich nicht. Aber derzeit passen die Einsen jedenfalls nicht rein. Die „Unit“-Werte der Einfügungen werden offensichtlich, wie auch die Fehlermeldung sagt in der Spalte „type“ eingefügt - und entsprechen deshalb nicht den hinterlegten, erlaubten, Werten.
Die Einsen sind hier und jetzt jedenfalls zu viel.

berlinerbolle

@gombersiob

Vollkommen richtig, so wie es im Screenshot ist, kann es nicht funktionieren - egal ob die Option "Multiple Device IDs" angehakt ist oder nicht. Mit der angehakten Option kommt eine zusätzliche Spalte "deviceId" dazu, die natürlich in der ersten Zeile entsprechend dabei sein muss.

Deshalb mein Verweis auf das github Repo, da passt es.

Schneider

Cool, hat geklappt. Danke für die Hilfe.

Jetzt habe ich die Objekte drin - allerdings stehen alle auf "0":

Homoran

@schneider sagte in Sungrow WR SGH10RT erfolgreich mit MODBUS eingebunden:

Jetzt habe ich die Objekte drin

nicht wirklich.
Da steht bestimmt was im log.

Das NaN statt Registernummer spricht Bände

Wo befindest du dich da?

Schneider

Protokolle:

Objekte:

Homoran

@schneider ... und die Konfiguration?

Schneider

Diskrete Eingänge / Ausgänge habe ich nichts eingetragen. Ebenso ins Holding-Register.

ubecker

@schneider nimm mal in der Config Aliasse benutzen raus. Ich erinnere mich das hatte ich auch mal so

Homoran

@schneider bitte Logstufe auf debug umstellen.
Hak mal "aliases benutzen" ab

Schneider

Jetzt verbindet sich der Adapter nicht mehr

Homoran

@schneider sagte in Sungrow WR SGH10RT erfolgreich mit MODBUS eingebunden:

Jetzt verbindet sich der Adapter nicht mehr

log bitte als Text in code-tags posten und auf debug umstellen

EDIT:
Wo komnt jetzt due Geräte ID 200 und doppelt so hohe Register her?

berlinerbolle

@schneider

Und nimm zur Sicherheit erstmal die Zeilen mit DeviceID 200 (das ist die für den Akku mit den entsprechenden Modbus Registern) ganz raus. Die DeviceID des Akkus MUSS nicht 200 sein (kann man zum Beispiel über das WinetS nachschauen), falls du überhaupt einen hast? Bin gerade am Handy und kann nicht zu deinem ersten Post schauen, welchen Wechselrichter und/oder Akku du hast.

Ältere Firmware Versionen führen den Akku auch gar nicht separat auf, das könnte auch eine Ursache sein auch falls du einen Akku hast.

gmt94

@schneider

Hast du im Winet dongel überhaupt modbus aktiviert?

GombersIOB

@schneider
Diese „Not-a-Number (NaN)“ beziehen sich auf die Registernummern. Da steht in der Spalte sicher noch ein Leerzeichen dabei. Etwa „4999 „ statt „4999“.

Homoran

@gombersiob sagte in Sungrow WR SGH10RT erfolgreich mit MODBUS eingebunden:

@schneider
Diese „Not-a-Number (NaN)“ beziehen sich auf die Registernummern. Da steht in der Spalte sicher noch ein Leerzeichen dabei. Etwa „4999 „ statt „4999“.

Das Thema hatten wir gerade erst
https://forum.iobroker.net/post/1221502

Deswegen warte ich auch noch auf das debug-log von @schneider

Schneider

2024-12-13 19:51:04.877 - info: host.iobroker "system.adapter.modbus.0" enabled
2024-12-13 19:51:05.060 - info: host.iobroker instance system.adapter.modbus.0 in version "6.3.2" started with pid 1511
2024-12-13 19:51:05.555 - debug: modbus.0 (1511) Redis Objects: Use Redis connection: 127.0.0.1:9001
2024-12-13 19:51:05.565 - debug: modbus.0 (1511) Objects client ready ... initialize now
2024-12-13 19:51:05.607 - debug: modbus.0 (1511) Objects create System PubSub Client
2024-12-13 19:51:05.608 - debug: modbus.0 (1511) Objects create User PubSub Client
2024-12-13 19:51:05.618 - debug: modbus.0 (1511) Objects client initialize lua scripts
2024-12-13 19:51:05.620 - debug: modbus.0 (1511) Objects connected to redis: 127.0.0.1:9001
2024-12-13 19:51:05.628 - debug: modbus.0 (1511) Redis States: Use Redis connection: 127.0.0.1:9000
2024-12-13 19:51:05.672 - debug: modbus.0 (1511) States create System PubSub Client
2024-12-13 19:51:05.672 - debug: modbus.0 (1511) States create User PubSub Client
2024-12-13 19:51:05.719 - debug: modbus.0 (1511) States connected to redis: 127.0.0.1:9000
2024-12-13 19:51:05.733 - debug: modbus.0 (1511) Plugin sentry Initialize Plugin (enabled=true)
2024-12-13 19:51:05.919 - info: modbus.0 (1511) starting. Version 6.3.2 in /opt/iobroker/node_modules/iobroker.modbus, node: v18.19.0, js-controller: 7.0.3
2024-12-13 19:51:05.972 - debug: modbus.0 (1511) Initialize Objects for disInputs: []
2024-12-13 19:51:05.972 - debug: modbus.0 (1511) Initialize Objects for coils: []
2024-12-13 19:51:05.973 - debug: modbus.0 (1511) Initialize Objects for inputRegs: [{"_address":4999,"deviceId":1,"name":"Device type code","description":"Geräte Typ-Code","unit":"","type":"int8be","len":1,"factor":1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":4999,"id":"inputRegisters.1.4999_Device_type__code"},{"_address":5000,"deviceId":1,"name":"Nominal Output Power","description":"Installierte Leistung","unit":"Kw","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5000,"id":"inputRegisters.1.5000_Nominal_Output_Power"},{"_address":5002,"deviceId":1,"name":"Daily Output Energy","description":"Eigene Energienutzung heute (PV & Akku)","unit":"Kwh","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5002,"id":"inputRegisters.1.5002_Daily__Output_Energy"},{"_address":5003,"deviceId":1,"name":"Total Output Energy","description":"Eigene Energienutzung gesamt (PV & Akku)","unit":"Kwh","type":"uint32sw","len":2,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5003,"id":"inputRegisters.1.5003_Total_Output_Energy"},{"_address":5007,"deviceId":1,"name":"Inside Temperature","description":"Temperatur im Wechselrichter","unit":"°C","type":"int16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5007,"id":"inputRegisters.1.5007_Inside__Temperature"},{"_address":5010,"deviceId":1,"name":"MPPT 1 Voltage","description":"MPPT1 Spannung","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5010,"id":"inputRegisters.1.5010_MPPT_1_Voltage"},{"_address":5011,"deviceId":1,"name":"MPPT 1 Current","description":"MPPT1 Strom","unit":"A","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5011,"id":"inputRegisters.1.5011_MPPT_1_Current"},{"_address":5012,"deviceId":1,"name":"MPPT 2 Voltage","description":"MPPT2 Spannung","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5012,"id":"inputRegisters.1.5012_MPPT_2_Voltage"},{"_address":5013,"deviceId":1,"name":"MPPT 2 Current","description":"MPPT2 Strom","unit":"A","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5013,"id":"inputRegisters.1.5013_MPPT_2_Current"},{"_address":5016,"deviceId":1,"name":"Total DC Power","description":"PV-Leistung aktuell","unit":"W","type":"uint32sw","len":2,"factor":1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5016,"id":"inputRegisters.1.5016_Total_DC_Power"},{"_address":5018,"deviceId":1,"name":"Spannung Ph A","description":"Spannung Phase A","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5018,"id":"inputRegisters.1.5018_Spannung_Ph_A"},{"_address":5019,"deviceId":1,"name":"Spannung Ph B","description":"Spannung Phase B","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5019,"id":"inputRegisters.1.5019_Spannung_Ph_B"},{"_address":5020,"deviceId":1,"name":"Spannung Ph C","description":"Spannung Phase C","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5020,"id":"inputRegisters.1.5020_Spannung_Ph_C"},{"_address":5032,"deviceId":1,"name":"Reactive Power","description":"Blindleistung","unit":"VA®","type":"int32sw","len":2,"factor":1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5032,"id":"inputRegisters.1.5032_Reactive_Power"},{"_address":5034,"deviceId":1,"name":"Power Factor","description":"Leistungsfaktor","unit":"","type":"int16be","len":1,"factor":0.001,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5034,"id":"inputRegisters.1.5034_Power_Factor"},{"_address":5035,"deviceId":1,"name":"Grid Frequency","description":"Netzfrequenz","unit":"Hz","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5035,"id":"inputRegisters.1.5035_Grid_Frequency"},{"_address":5600,"deviceId":1,"name":"Gesamtleistung DTSU666","description":"Leistung","unit":"W","type":"int32sw","len":2,"factor":1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5600,"id":"inputRegisters.1.5600_Gesamtleistung_DTSU666"},{"_address":5602,"deviceId":1,"name":"L1 Leistung DTSU666","description":"Leistung L1","unit":"W","type":"int32sw","len":2,"factor":1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5602,"id":"inputRegisters.1.5602_L1_Leistung_DTSU666"},{"_address":5604,"deviceId":1,"name":"L2 Leistung DTSU666","description":"Leistung L2","unit":"W","type":"int32sw","len":2,"factor":1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5604,"id":"inputRegisters.1.5604_L2_Leistung_DTSU666"},{"_address":5606,"deviceId":1,"name":"L3 Leistung DTSU666","description":"Leistung L3","unit":"W","type":"int32sw","len":2,"factor":1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5606,"id":"inputRegisters.1.5606_L3_Leistung_DTSU666"},{"_address":5740,"deviceId":1,"name":"PhaseA Voltage DTSU666","description":"Spannung Phase1","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5740,"id":"inputRegisters.1.5740_PhaseA_Voltage_DTSU666"},{"_address":5741,"deviceId":1,"name":"PhaseB Voltage DTSU666","description":"Spannung Phase2","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5741,"id":"inputRegisters.1.5741_PhaseB_Voltage_DTSU666"},{"_address":5742,"deviceId":1,"name":"PhaseC Voltage DTSU666","description":"Spannung Phase3","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5742,"id":"inputRegisters.1.5742_PhaseC_Voltage_DTSU666"},{"_address":5743,"deviceId":1,"name":"PhaseA Current DTSU666","description":"Strom Phase1","unit":"A","type":"uint16be","len":1,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5743,"id":"inputRegisters.1.5743_PhaseA_Current_DTSU666"},{"_address":5744,"deviceId":1,"name":"PhaseB Current DTSU666","description":"Strom Phase2","unit":"A","type":"uint16be","len":1,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5744,"id":"inputRegisters.1.5744_PhaseB_Current_DTSU666"},{"_address":5745,"deviceId":1,"name":"PhaseC Current DTSU666","description":"Strom Phase3","unit":"A","type":"uint16be","len":1,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5745,"id":"inputRegisters.1.5745_PhaseC_Current_DTSU666"},{"_address":5746,"deviceId":1,"name":"Import DTSU666","description":"Import","unit":"kWh","type":"uint32sw","len":2,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5746,"id":"inputRegisters.1.5746_Import_DTSU666"},{"_address":5748,"deviceId":1,"name":"Export DTSU666","description":"Export","unit":"kWh","type":"uint32sw","len":2,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":5748,"id":"inputRegisters.1.5748_Export_DTSU666"},{"_address":6226,"deviceId":1,"name":"Monthly PV energy yields January","description":" Monatlicher PV Energieertrag Januar","unit":"Kwh","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":6226,"id":"inputRegisters.1.6226_Monthly_PV_energy_yields_January"},{"_address":6227,"deviceId":1,"name":"Monthly PV energy yields February","description":" Monatlicher PV Energieertrag Februar","unit":"Kwh","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":6227,"id":"inputRegisters.1.6227_Monthly_PV_energy_yields_February"},{"_address":6228,"deviceId":1,"name":"Monthly PV energy yields March","description":" Monatlicher PV Energieertrag März","unit":"Kwh","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","cw":false,"isScale":false,"address":6228,"id":"inputRegisters.1.6228_Monthly_PV_energy_yields_March"},
... GEKÜRZT
{"_id":"inputRegisters.1.13075_BMS_fault_2","type":"state","common":{"name":"BMS fault 2","role":"value","type":"number","read":true,"write":false,"def":0,"unit":""},"native":{"regType":"inputRegs","address":13075,"deviceId":1,"type":"uint32sw","len":2,"offset":0,"factor":1}}
2024-12-13 19:51:05.981 - debug: modbus.0 (1511) Add inputRegisters.1.13077_BMS_alarm_2: {"_id":"inputRegisters.1.13077_BMS_alarm_2","type":"state","common":{"name":"BMS alarm 2","role":"value","type":"number","read":true,"write":false,"def":0,"unit":""},"native":{"regType":"inputRegs","address":13077,"deviceId":1,"type":"uint32sw","len":2,"offset":0,"factor":1}}
2024-12-13 19:51:05.981 - debug: modbus.0 (1511) Initialize Objects for holdingRegs: []
2024-12-13 19:51:06.325 - info: modbus.0 (1511) Connected to slave 192.168.178.74
2024-12-13 19:51:06.325 - debug: modbus.0 (1511) [DevID_1] Poll start ---------------------
2024-12-13 19:51:06.326 - debug: modbus.0 (1511) Initialization of scale factors done!
2024-12-13 19:51:06.326 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 4999 - 22 registers
2024-12-13 19:51:06.337 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 4999 DONE
2024-12-13 19:51:06.342 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 5032 - 4 registers
2024-12-13 19:51:06.346 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 5032 DONE
2024-12-13 19:51:06.347 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 5600 - 8 registers
2024-12-13 19:51:06.353 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 5600 DONE
2024-12-13 19:51:06.356 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 5740 - 10 registers
2024-12-13 19:51:06.361 - warn: modbus.0 (1511) [DevID_1] Poll error count: 1 code: "ReadInputRegisters: Invalid FC 132"
2024-12-13 19:51:07.412 - debug: modbus.0 (1511) [DevID_1] Poll start ---------------------
2024-12-13 19:51:07.412 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 4999 - 22 registers
2024-12-13 19:51:07.416 - warn: modbus.0 (1511) Error in handler for 4: RangeError [ERR_BUFFER_OUT_OF_BOUNDS]: Attempt to access memory outside buffer bounds
2024-12-13 19:51:12.613 - warn: modbus.0 (1511) [DevID_1] Poll error count: 2 code: "App Timeout"
2024-12-13 19:51:13.664 - debug: modbus.0 (1511) [DevID_1] Poll start ---------------------
2024-12-13 19:51:13.665 - debug: modbus.0 (1511) [DevID_1/inputRegs] Poll address 4999 - 22 registers
2024-12-13 19:51:18.666 - warn: modbus.0 (1511) Error: undefined
2024-12-13 19:51:18.666 - error: modbus.0 (1511) Request timed out.
2024-12-13 19:51:18.666 - error: modbus.0 (1511) Client in error state.
2024-12-13 19:51:18.666 - warn: modbus.0 (1511) [DevID_1] Poll error count: 3 code: {"err":"timeout","timeout":5000}
2024-12-13 19:51:18.667 - debug: modbus.0 (1511) Socket closed with error
2024-12-13 19:51:18.667 - debug: modbus.0 (1511) Clearing timeout of the current request.
2024-12-13 19:51:18.667 - debug: modbus.0 (1511) Cleaning up request fifo.
2024-12-13 19:51:19.667 - debug: modbus.0 (1511) Closing client on purpose.
2024-12-13 19:51:19.667 - info: modbus.0 (1511) Disconnected from slave 192.168.178.74

Schneider

@gmt94 Ne.. Ich wüsste auch nicht wo. Ist mir zumindest nicht ins Auge gesprungen

Community Forum

NEWS

Sungrow WR SGH10RT erfolgreich mit MODBUS eingebunden

Support us

799

32.4k

81.5k

1.3m