USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id
-
@n811e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
2024-01-31 20:03:44.528 - error: zigbee.0 (17095) Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby"
Versuch doch mal eine andere PanId, offenbar funkt da noch ein anderes Netzwerk in deinen Bereich.
Kann sein, dass du anschließend alles neu anlernen musst. -
Das ist ja verrückt!!! Das klappt jetzt wieder. Damit hätte ich nicht gerechnet.
Vielen Dank an alle, insbesondere @thomas-braun für die viele Mühe, die ihr euch gemacht habt.
Dankeschön
-
Leider wieder am selben Punkt
iob logs --watch | uniq 2024-02-01 14:04:36.400 - info: host.raspberrypi "system.adapter.zigbee.0" enabled 2024-02-01 14:04:37.659 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 26738 2024-02-01 14:04:46.093 - info: zigbee.0 (26738) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-02-01 14:04:46.235 - info: zigbee.0 (26738) delete old Backup files. keep only last 10 2024-02-01 14:04:46.239 - info: zigbee.0 (26738) Starting Zigbee npm ... 2024-02-01 14:04:46.707 - info: zigbee.0 (26738) Installed Version: iobroker.zigbee@1.10.1 2024-02-01 14:04:47.197 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:falseWert:system.adapter.shelly.1bestätigt:true 2024-02-01 14:04:47.679 - error: zigbee.0 (26738) Configuration is not consistent with adapter state/backup! 2024-02-01 14:04:47.679 - error: zigbee.0 (26738) - PAN ID: configured=6557, adapter=6556 2024-02-01 14:04:47.680 - error: zigbee.0 (26738) - Extended PAN ID: configured=ddd3dddfddddaddd, adapter=ddd3dddfddddaddd 2024-02-01 14:04:47.681 - error: zigbee.0 (26738) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d 2024-02-01 14:04:47.682 - error: zigbee.0 (26738) - Channel List: configured=11, adapter=11 2024-02-01 14:04:47.683 - error: zigbee.0 (26738) Please update configuration to prevent further issues. 2024-02-01 14:04:47.684 - error: zigbee.0 (26738) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. 2024-02-01 14:04:47.685 - error: zigbee.0 (26738) Re-commissioning your network will require re-pairing of all devices! 2024-02-01 14:04:47.814 - error: zigbee.0 (26738) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" 2024-02-01 14:04:47.814 - error: zigbee.0 (26738) Failed to start Zigbee 2024-02-01 14:04:47.816 - error: zigbee.0 (26738) Error herdsman start 2024-02-01 14:04:46.093 - info: zigbee.0 (26738) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-02-01 14:04:46.235 - info: zigbee.0 (26738) delete old Backup files. keep only last 10 2024-02-01 14:04:46.239 - info: zigbee.0 (26738) Starting Zigbee npm ... 2024-02-01 14:04:46.707 - info: zigbee.0 (26738) Installed Version: iobroker.zigbee@1.10.1 2024-02-01 14:04:47.679 - error: zigbee.0 (26738) Configuration is not consistent with adapter state/backup! 2024-02-01 14:04:47.679 - error: zigbee.0 (26738) - PAN ID: configured=6557, adapter=6556 2024-02-01 14:04:47.680 - error: zigbee.0 (26738) - Extended PAN ID: configured=ddd3dddfddddaddd, adapter=ddd3dddfddddaddd 2024-02-01 14:04:47.681 - error: zigbee.0 (26738) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d 2024-02-01 14:04:47.682 - error: zigbee.0 (26738) - Channel List: configured=11, adapter=11 2024-02-01 14:04:47.683 - error: zigbee.0 (26738) Please update configuration to prevent further issues. 2024-02-01 14:04:47.684 - error: zigbee.0 (26738) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. 2024-02-01 14:04:47.685 - error: zigbee.0 (26738) Re-commissioning your network will require re-pairing of all devices! 2024-02-01 14:04:47.814 - error: zigbee.0 (26738) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" 2024-02-01 14:04:47.814 - error: zigbee.0 (26738) Failed to start Zigbee 2024-02-01 14:04:47.816 - error: zigbee.0 (26738) Error herdsman start 2024-02-01 14:04:57.822 - info: zigbee.0 (26738) Try to reconnect. 1 attempts left 2024-02-01 14:04:57.823 - info: zigbee.0 (26738) Starting Zigbee npm ... 2024-02-01 14:04:57.841 - info: zigbee.0 (26738) Installed Version: iobroker.zigbee@1.10.1 2024-02-01 14:04:58.109 - error: zigbee.0 (26738) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2024-02-01 14:04:58.112 - error: zigbee.0 (26738) Failed to start Zigbee 2024-02-01 14:04:58.112 - error: zigbee.0 (26738) Error herdsman start 2024-02-01 14:04:57.822 - info: zigbee.0 (26738) Try to reconnect. 1 attempts left 2024-02-01 14:04:57.823 - info: zigbee.0 (26738) Starting Zigbee npm ... 2024-02-01 14:04:57.841 - info: zigbee.0 (26738) Installed Version: iobroker.zigbee@1.10.1 2024-02-01 14:04:58.109 - error: zigbee.0 (26738) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2024-02-01 14:04:58.112 - error: zigbee.0 (26738) Failed to start Zigbee 2024-02-01 14:04:58.112 - error: zigbee.0 (26738) Error herdsman start -
@n811e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
PAN ID: configured=6557, adapter=6556
Die Werte müssen übereinstimmen.
-
die PAN ID, stelle ich ja unter Einstellungen ein, aber wo kann ich den Wert für den Adapter ändern?
-
? Gar nicht. Aber die PAN-Id in den Einstellungen muss auf den Wert im Adapter geändert werden.
-
Ich habe leider auch das problem mit
ls: cannot access '/dev/serial/by-ids': No such file or directoryIch ziehe gerade mit iobroker um und habe iob neu auf ubuntu 22.04 installiert und anschließend ein iob backup eingespielt.
Ausgang von iob diag lautet:
========== Start marking the full check here =========== ```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer-vm Chassis: vm 🖴 Virtualization: kvm Operating System: Ubuntu 24.04.1 LTS Kernel: Linux 6.8.0-50-generic Architecture: x86-64 Hardware Vendor: QEMU Hardware Model: Standard PC _i440FX + PIIX, 1996_ Firmware Version: 4.2023.08-4 Firmware Date: Thu 2024-02-15 Firmware Age: 9month 3w 6d OS is similar to: debian model name : Common KVM processor Docker : false Virtualization : kvm Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 23:59:11 up 21 min, 1 user, load average: 0.53, 0.40, 0.45 CPU threads: 8 *** LIFE CYCLE STATUS *** Operating System is the current Ubuntu LTS release codenamed 'noble'! *** TIME AND TIMEZONES *** Local time: Wed 2024-12-11 23:59:11 CET Universal time: Wed 2024-12-11 22:59:11 UTC RTC time: Wed 2024-12-11 22:59:10 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi sudo users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 10G 3.0G 6.9G 5.3M 846M 7.5G Swap: 0B 0B 0B Total: 10G 3.0G 6.9G Active iob-Instances: 58 9938 M total memory 2820 M used memory 2578 M active memory 460 M inactive memory 6572 M free memory 54 M buffer memory 752 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 23:59:11 up 21 min, 1 user, load average: 0.53, 0.40, 0.45 Tasks: 179 total, 1 running, 178 sleeping, 0 stopped, 0 zombie %Cpu(s): 20.5 us, 4.5 sy, 0.0 ni, 75.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 9938.9 total, 6572.1 free, 2820.9 used, 807.5 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 7118.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on tmpfs tmpfs 994M 1.1M 993M 1% /run efivarfs efivarfs 256K 20K 232K 8% /sys/firmware/efi/efivars /dev/sda1 ext4 51G 6.8G 45G 14% / tmpfs tmpfs 4.9G 0 4.9G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/sda16 ext4 881M 112M 708M 14% /boot /dev/sda15 vfat 105M 6.1M 99M 6% /boot/efi tmpfs tmpfs 994M 12K 994M 1% /run/user/0 Messages concerning ext4 filesystem in dmesg: [Wed Dec 11 23:38:08 2024] EXT4-fs (sda1): mounted filesystem 428c45af-c748-4f29-9fe5-d56aa4a3f75e ro with ordered data mode. Quota mode: none. [Wed Dec 11 23:38:09 2024] EXT4-fs (sda1): re-mounted 428c45af-c748-4f29-9fe5-d56aa4a3f75e r/w. Quota mode: none. [Wed Dec 11 23:38:11 2024] EXT4-fs (sda16): mounted filesystem a4ce610e-4a3c-4ed2-8852-b138eade5b0b r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,relatime,discard,errors=remount-ro,commit=30 `-/boot /dev/sda16 ext4 rw,relatime `-/boot/efi /dev/sda15 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 687M /var/ 344M /var/cache 314M /var/cache/apt 216M /var/cache/apt/archives 199M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 19.2M in the file system. /opt/iobroker/backups: 27M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 213M /opt/iobroker/iobroker-data/ 176M /opt/iobroker/iobroker-data/files 158M /opt/iobroker/iobroker-data/files/admin.admin 157M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 157M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 36M /opt/iobroker/iobroker-data/objects.jsonl 7.4M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_node_modules_mui_icons-material_esm_index_js.d7ed606b.chunk.js.map 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.e5b40573.chunk.js.map 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.8219fdd8.chunk.js.map 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.358dc38e.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 18.19.1+dfsg-6ubuntu5 500 500 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: ioBroker-Rock ioBroker-Rock (version: 7.0.6, hostname: ioBroker-Rock , alive, uptime: 1247) raspberrypi-display1 raspberrypi-display1 (version: 7.0.2, hostname: raspberrypi-display1, alive, uptime: 1231) raspberrypi-display2 raspberrypi-display2 (version: 7.0.2, hostname: raspberrypi-display2, alive, uptime: 1233) raspberrypi-display3 raspberrypi-display3 (version: 4.0.24, hostname: raspberrypi-display3, alive, uptime: 1237) raspberrypi-display4 raspberrypi-display4 (version: 5.0.19, hostname: raspberrypi-display4, alive, uptime: 1239) raspberrypi-display5 raspberrypi-display5 (version: 7.0.2, hostname: raspberrypi-display5, alive, uptime: 1239) raspberrypi-slave raspberrypi-slave (version: 5.0.8, hostname: raspberrypi-slave, alive, uptime: 1235) Core adapters versions js-controller: 7.0.6 admin: 7.4.4 javascript: 8.8.3 nodejs modules from github: 3 +-- iobroker.energiefluss-erweitert@0.6.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss-erweitert.git#a898e0cd728900620b9bfea0f1710d8720ebf82f) | +-- node-milight-promise@0.3.2 (git+ssh://git@github.com/Steiger04/node-milight-promise.git#f1089feac9b7990727adf2016891029436729d33) | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.2 : admin : ioBroker-Rock - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.3 : admin : ioBroker-Rock - enabled, port: 8900, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : ioBroker-Rock - enabled + system.adapter.alexa2.0 : alexa2 : ioBroker-Rock - enabled system.adapter.backitup.0 : backitup : ioBroker-Rock - disabled + system.adapter.cloud.0 : cloud : ioBroker-Rock - enabled system.adapter.daswetter.0 : daswetter : ioBroker-Rock - enabled + system.adapter.device-reminder.0 : device-reminder : ioBroker-Rock - enabled + system.adapter.device-watcher.0 : device-watcher : ioBroker-Rock - enabled + system.adapter.discovergy.0 : discovergy : ioBroker-Rock - enabled system.adapter.discovery.0 : discovery : ioBroker-Rock - disabled system.adapter.dwd.0 : dwd : ioBroker-Rock - enabled + system.adapter.echarts.0 : echarts : ioBroker-Rock - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker-Rock - enabled system.adapter.feiertage.0 : feiertage : ioBroker-Rock - enabled system.adapter.flot.0 : flot : ioBroker-Rock - enabled + system.adapter.hass.0 : hass : ioBroker-Rock - enabled, port: 8123 + system.adapter.heatingcontrol.1 : heatingcontrol : ioBroker-Rock - enabled + system.adapter.hm-rega.0 : hm-rega : ioBroker-Rock - enabled + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : ioBroker-Rock - enabled, port: 0 system.adapter.hoover.0 : hoover : ioBroker-Rock - disabled system.adapter.ical.0 : ical : ioBroker-Rock - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: ioBroker-Rock - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker-Rock - enabled system.adapter.icons-material-png.0 : icons-material-png : ioBroker-Rock - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker-Rock - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker-Rock - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : ioBroker-Rock - enabled + system.adapter.influxdb.0 : influxdb : ioBroker-Rock - enabled, port: 8086 + system.adapter.javascript.0 : javascript : ioBroker-Rock - enabled + system.adapter.javascript.2 : javascript : raspberrypi-display1 - enabled + system.adapter.javascript.3 : javascript : raspberrypi-display4 - enabled + system.adapter.javascript.4 : javascript : raspberrypi-display2 - enabled + system.adapter.javascript.5 : javascript : raspberrypi-display5 - enabled + system.adapter.midea.0 : midea : ioBroker-Rock - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker-Rock - disabled, port: 54321, bind: 0.0.0.0 system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker-Rock - disabled, port: 54321, bind: 0.0.0.0 + system.adapter.mihome.0 : mihome : ioBroker-Rock - enabled, port: 9898, bind: 192.168.3.100 + system.adapter.milight-smart-light.0 : milight-smart-light : ioBroker-Rock - enabled + system.adapter.modbus.0 : modbus : ioBroker-Rock - enabled system.adapter.mqtt-client.0 : mqtt-client : ioBroker-Rock - disabled, port: 1883 + system.adapter.mqtt.0 : mqtt : ioBroker-Rock - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.musiccast.0 : musiccast : ioBroker-Rock - enabled + system.adapter.nut.0 : nut : ioBroker-Rock - enabled system.adapter.openweathermap.0 : openweathermap : ioBroker-Rock - enabled + system.adapter.proxmox.0 : proxmox : ioBroker-Rock - enabled, port: 8006 + system.adapter.rpi2.1 : rpi2 : raspberrypi-display1 - enabled + system.adapter.rpi2.2 : rpi2 : raspberrypi-display2 - enabled + system.adapter.rpi2.3 : rpi2 : raspberrypi-display3 - enabled + system.adapter.rpi2.4 : rpi2 : raspberrypi-display4 - enabled + system.adapter.rpi2.5 : rpi2 : raspberrypi-display5 - enabled + system.adapter.sainlogic.0 : sainlogic : ioBroker-Rock - enabled, port: 45000, bind: 192.168.3.100 + system.adapter.scenes.0 : scenes : ioBroker-Rock - enabled + system.adapter.shelly.0 : shelly : ioBroker-Rock - enabled, port: 1890, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Rock - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : ioBroker-Rock - enabled system.adapter.simple-api.0 : simple-api : ioBroker-Rock - disabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartcontrol.0 : smartcontrol : ioBroker-Rock - enabled + system.adapter.smartmeter.0 : smartmeter : ioBroker-Rock - enabled + system.adapter.sonoff.0 : sonoff : ioBroker-Rock - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker-Rock - enabled system.adapter.sprinklecontrol.0 : sprinklecontrol : ioBroker-Rock - disabled + system.adapter.statistics.0 : statistics : ioBroker-Rock - enabled + system.adapter.synology.0 : synology : ioBroker-Rock - enabled, port: 5001 + system.adapter.telegram.0 : telegram : ioBroker-Rock - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : ioBroker-Rock - enabled system.adapter.unifi.0 : unifi : ioBroker-Rock - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : ioBroker-Rock - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : ioBroker-Rock - enabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: ioBroker-Rock - enabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: ioBroker-Rock - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: ioBroker-Rock - enabled + system.adapter.vis-2.0 : vis-2 : ioBroker-Rock - enabled system.adapter.vis-bars.0 : vis-bars : ioBroker-Rock - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : ioBroker-Rock - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : ioBroker-Rock - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : ioBroker-Rock - enabled system.adapter.vis-history.0 : vis-history : ioBroker-Rock - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker-Rock - enabled system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker-Rock - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker-Rock - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker-Rock - enabled system.adapter.vis-justgage.0 : vis-justgage : ioBroker-Rock - enabled system.adapter.vis-keyboard.0 : vis-keyboard : ioBroker-Rock - enabled system.adapter.vis-material.0 : vis-material : ioBroker-Rock - enabled system.adapter.vis-metro.0 : vis-metro : ioBroker-Rock - enabled system.adapter.vis-players.0 : vis-players : ioBroker-Rock - enabled system.adapter.vis-plumb.0 : vis-plumb : ioBroker-Rock - enabled system.adapter.vis-rgraph.0 : vis-rgraph : ioBroker-Rock - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker-Rock - enabled system.adapter.vis-weather.0 : vis-weather : ioBroker-Rock - enabled system.adapter.vis.0 : vis : ioBroker-Rock - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker-Rock - enabled system.adapter.web-speedy.0 : web-speedy : ioBroker-Rock - disabled + system.adapter.web.0 : web : ioBroker-Rock - enabled, port: 8082, bind: 192.168.3.100 (SSL), run as: admin + system.adapter.web.1 : web : ioBroker-Rock - enabled, port: 8083, bind: 192.168.3.100, run as: admin + system.adapter.wolf-smartset.0 : wolf-smartset : ioBroker-Rock - enabled system.adapter.worx.0 : worx : ioBroker-Rock - disabled + system.adapter.yamaha.0 : yamaha : ioBroker-Rock - enabled + system.adapter.yeelight-2.0 : yeelight-2 : ioBroker-Rock - enabled system.adapter.yr.0 : yr : ioBroker-Rock - enabled + system.adapter.zigbee.0 : zigbee : ioBroker-Rock - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.2 : admin : ioBroker-Rock - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.3 : admin : ioBroker-Rock - enabled, port: 8900, bind: 0.0.0.0, run as: admin + system.adapter.hass.0 : hass : ioBroker-Rock - enabled, port: 8123 + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : ioBroker-Rock - enabled, port: 8086 + system.adapter.mihome.0 : mihome : ioBroker-Rock - enabled, port: 9898, bind: 192.168.3.100 + system.adapter.mqtt.0 : mqtt : ioBroker-Rock - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.proxmox.0 : proxmox : ioBroker-Rock - enabled, port: 8006 + system.adapter.sainlogic.0 : sainlogic : ioBroker-Rock - enabled, port: 45000, bind: 192.168.3.100 + system.adapter.shelly.0 : shelly : ioBroker-Rock - enabled, port: 1890, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Rock - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : ioBroker-Rock - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : ioBroker-Rock - enabled, port: 5001 + system.adapter.telegram.0 : telegram : ioBroker-Rock - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker-Rock - enabled, port: 8082, bind: 192.168.3.100 (SSL), run as: admin + system.adapter.web.1 : web : ioBroker-Rock - enabled, port: 8083, bind: 192.168.3.100, run as: admin + system.adapter.zigbee.0 : zigbee : ioBroker-Rock - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Instances Used repository: beta Adapter "admin" : 7.4.4 , installed 7.4.4 Adapter "alarm" : 3.6.4 , installed 3.6.4 Adapter "alexa2" : 3.26.7 , installed 3.26.7 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.2.1 , installed 3.2.1 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "discovergy" : 0.5.13 , installed 0.5.13 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "energiefluss-erweitert": 0.6.0, installed 0.6.0 Adapter "feiertage" : 1.2.0 , installed 1.2.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "hass" : 1.4.0 , installed 1.4.0 Adapter "heatingcontrol": 2.12.13 , installed 2.12.13 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "hoover" : 0.1.3 , installed 0.1.3 Adapter "ical" : 1.16.1 , installed 1.16.1 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "midea" : 0.0.7 , installed 0.0.7 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "milight-smart-light": 1.2.2, installed 1.2.2 Adapter "modbus" : 6.4.0 , installed 6.4.0 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "mqtt-client" : 2.1.0 , installed 2.1.0 Adapter "musiccast" : 1.1.4 , installed 1.1.4 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "proxmox" : 2.3.0 , installed 2.3.0 Adapter "sainlogic" : 0.11.4 , installed 0.11.4 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 8.5.1 , installed 8.5.1 Adapter "shuttercontrol": 1.8.5 , installed 1.8.5 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 3.1.0 , installed 3.1.0 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.11.1 , installed 2.11.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 1.1.1, installed 1.1.1 Adapter "vis-2-widgets-inventwo": 0.1.11, installed 0.1.11 Adapter "vis-2-widgets-jaeger-design": 1.3.9, installed 1.3.9 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.10.1 , installed 1.10.1 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "vw-connect" : 0.6.1 , installed 0.6.1 Adapter "web" : 6.3.1 , installed 6.3.1 Adapter "web-speedy" : 0.2.0 , installed 0.2.0 Adapter "wolf-smartset": 1.2.3 , installed 1.2.3 Adapter "worx" : 3.1.1 , installed 3.1.1 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yamaha" : 0.5.4 , installed 0.5.4 Adapter "yeelight-2" : 1.4.0 , installed 1.4.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.13 , installed 1.10.13 Objects and States Please stand by - This may take a while Objects: 39194 States: 36289 *** OS-Repositories and Updates *** Hit:1 http://archive.ubuntu.com/ubuntu noble InRelease Hit:2 http://archive.ubuntu.com/ubuntu noble-updates InRelease Hit:3 http://archive.ubuntu.com/ubuntu noble-backports InRelease Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:5 http://security.ubuntu.com/ubuntu noble-security InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.3.100:2010 0.0.0.0:* LISTEN 1001 11540 1563/io.hm-rpc.2 tcp 0 0 192.168.3.100:2001 0.0.0.0:* LISTEN 1001 9811 1487/io.hm-rpc.0 tcp 0 0 192.168.3.100:8701 0.0.0.0:* LISTEN 1001 11703 1683/io.hm-rpc.1 tcp 0 0 192.168.3.100:45000 0.0.0.0:* LISTEN 1001 12502 1752/io.sainlogic.0 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 715 1/init tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 8188 1273/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 10687 1373/io.mqtt.0 tcp 0 0 0.0.0.0:1899 0.0.0.0:* LISTEN 1001 11519 1548/io.shelly.1 tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 991 6774 633/systemd-resolve tcp 0 0 192.168.3.100:8083 0.0.0.0:* LISTEN 1001 13321 1917/io.web.1 tcp 0 0 192.168.3.100:8082 0.0.0.0:* LISTEN 1001 12687 1977/io.web.0 tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 991 6772 633/systemd-resolve tcp6 0 0 :::8900 :::* LISTEN 1001 8070 1089/io.admin.3 tcp6 0 0 :::22 :::* LISTEN 0 8316 1/init tcp6 0 0 :::111 :::* LISTEN 0 3605 1/init tcp6 0 0 :::8081 :::* LISTEN 1001 8885 973/io.admin.2 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 11624 1638/io.shelly.0 udp 0 0 0.0.0.0:47970 0.0.0.0:* 1001 11834 1812/io.milight-sma udp 0 0 127.0.0.54:53 0.0.0.0:* 991 6773 633/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 991 6771 633/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 716 1/init udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 10200 1868/io.musiccast.0 udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 11644 1653/io.mihome.0 udp6 0 0 :::111 :::* 0 717 1/init *** Log File - Last 25 Lines *** port: 80 } 2024-12-11 23:59:05.006 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:07.010 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:09.012 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:10.542 - info: influxdb.0 (1202) Store 272 buffered influxDB history points 2024-12-11 23:59:11.015 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:13.018 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:15.019 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:17.022 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:19.024 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:21.027 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:23.030 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:25.031 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:27.034 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:29.036 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:31.039 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:33.041 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:35.044 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:37.046 - warn: smartmeter.0 (1333) No or too long answer from Serial D Copy text starting here: ```bash ======================= SUMMARY ======================= v.2024-10-19 Static hostname: iobroker Icon name: computer-vm Chassis: vm 🖴 Virtualization: kvm Operating System: Ubuntu 24.04.1 LTS Kernel: Linux 6.8.0-50-generic Architecture: x86-64 Hardware Vendor: QEMU Hardware Model: Standard PC _i440FX + PIIX, 1996_ Firmware Version: 4.2023.08-4 Firmware Date: Thu 2024-02-15 Firmware Age: 9month 3w 6d Installation: kvm Kernel: x86_64 Userland: 64 bit Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 Recommended versions are nodejs and npm nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 10G 3.0G 6.6G 5.3M 1.1G 7.4G Swap: 0B 0B 0B Total: 10G 3.0G 6.6G Active iob-Instances: 58 Upgrade policy: none ioBroker Core: js-controller 7.0.6 admin 7.4.4 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Status admin and web instance: + system.adapter.admin.2 : admin : ioBroker-Rock - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.3 : admin : ioBroker-Rock - enabled, port: 8900, bind: 0.0.0.0, run as: admin system.adapter.web-speedy.0 : web-speedy : ioBroker-Rock - disabled + system.adapter.web.0 : web : ioBroker-Rock - enabled, port: 8082, bind: 192.168.3.100 (SSL), run as: admin + system.adapter.web.1 : web : ioBroker-Rock - enabled, port: 8083, bind: 192.168.3.100, run as: admin Objects: 39194 States: 36289 Size of iob-Database: 36M /opt/iobroker/iobroker-data/objects.jsonl 768K /opt/iobroker/iobroker-data/states.jsonl Operating System is the current Ubuntu LTS release codenamed 'noble'! =================== END OF SUMMARY ======================= Mark text until here for copying ===
-
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Virtualization: kvm
Der Stick muss an die VM durchgereicht werden.
Setz den user in die Gruppe adm rein. Und warum nennt man den user überhaupt ``pi`? Ist doch nicht mal ein Raspberry...
Und bring den Versions-Zoo bei den ganzen hosts auf den gleichen aktuellen Stand.
-
@thomas-braun sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Virtualization: kvm
Der Stick muss an die VM durchgereicht werden.
Die sind über Proxmox durchgereicht, werden über lsusb in der VM auch angezeigt.
Setz den user in die Gruppe adm rein. Und warum nennt man den user überhaupt ``pi`? Ist doch nicht mal ein Raspberry...
Kann ich machen, der User pi ist historisch mitgewandert.
Hat das mit der Gruppe adm, denn etwas mit meinem "ls: cannot access '/dev/serial/by-ids': No such file or directory" zutun? Oder wofür wird dies benötigt?Und bring den Versions-Zoo bei den ganzen hosts auf den gleichen aktuellen Stand.
Wird nach und nach, leider sind einige Distribution so alt, dass ein update nicht ohne weiteres mehr möglich ist.
-
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
leider sind einige Distribution so al
Dann haste da viel zu lange gepennt.
Die Gruppe
admwird für administrative Dinge benötigt. Unter anderem um logfiles auch ohne root-Rechte lesen zu können. -
@thomas-braun sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
leider sind einige Distribution so alt
Dann haste da viel zu lange gepennt.
Da muss ich dir recht geben
-
Ich komme aber trotzdem leider nicht weiter.
pi@iobroker:~$ lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 10c4:ea60 Silicon Labs CP210x UART Bridge Bus 002 Device 003: ID 0451:bef3 Texas Instruments, Inc. CC1352R1 Launchpad Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub pi@iobroker:~$ sudo ls /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directory -
Schau dir per
dmesg -wTdie Meldungen an, wenn der Stickk entfernt und nach einer Minute wieder eingesteckt wird.
-
@thomas-braun sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Schau dir per
dmesg -wTdie Meldungen an, wenn der Stickk entfernt und nach einer Minute wieder eingesteckt wird.
[Thu Dec 12 21:05:18 2024] usb 2-1: USB disconnect, device number 5 [Thu Dec 12 21:05:18 2024] usb 2-2: USB disconnect, device number 4 [Thu Dec 12 21:05:18 2024] workqueue: hub_event hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND [Thu Dec 12 21:05:18 2024] usb 2-2: new full-speed USB device number 6 using xhci_hcd [Thu Dec 12 21:05:18 2024] usb 2-2: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 [Thu Dec 12 21:05:18 2024] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Thu Dec 12 21:05:18 2024] usb 2-2: Product: CP2102 USB to UART Bridge Controller [Thu Dec 12 21:05:18 2024] usb 2-2: Manufacturer: Silicon Labs [Thu Dec 12 21:05:18 2024] usb 2-2: SerialNumber: 0021 [Thu Dec 12 21:05:54 2024] usb 2-1: new high-speed USB device number 7 using xhci_hcd [Thu Dec 12 21:05:54 2024] usb 2-1: New USB device found, idVendor=0451, idProduct=bef3, bcdDevice= 1.00 [Thu Dec 12 21:05:54 2024] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Thu Dec 12 21:05:54 2024] usb 2-1: Product: XDS110 (03.00.00.25) Embed with CMSIS-DAP [Thu Dec 12 21:05:54 2024] usb 2-1: Manufacturer: Texas Instruments [Thu Dec 12 21:05:54 2024] usb 2-1: SerialNumber: L1100L7S [Thu Dec 12 21:05:54 2024] hid-generic 0003:0451:BEF3.0003: hiddev0,hidraw0: USB HID v1.11 Device [Texas Instruments XDS110 (03.00.00.25) Embed with CMSIS-DAP] on usb-0000:01:1b.0-1/input5Ein USB-Device habe ich stecken lassen und eins habe ich getrennt und nach einer gewissen zeit, wieder verbunden.
-
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Ein USB-Device habe ich stecken lassen und eins habe ich getrennt
Und haben die auch Bezeichnungen?
-
@thomas-braun sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Ein USB-Device habe ich stecken lassen und eins habe ich getrennt
Und haben die auch Bezeichnungen?
Beide entfern.
Erst "Silicon Labs CP210x UART Bridge", anschließend " Texas Instruments, Inc. CC1352R1 Launchpad".[Thu Dec 12 21:13:04 2024] usb 2-2: USB disconnect, device number 6 [Thu Dec 12 21:13:10 2024] usb 2-1: USB disconnect, device number 7Einen wieder Verbunden "Texas Instruments, Inc. CC1352R1 Launchpad".
[Thu Dec 12 21:14:40 2024] usb 2-1: new high-speed USB device number 8 using xhci_hcd [Thu Dec 12 21:14:40 2024] usb 2-1: New USB device found, idVendor=0451, idProduct=bef3, bcdDevice= 1.00 [Thu Dec 12 21:14:40 2024] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Thu Dec 12 21:14:40 2024] usb 2-1: Product: XDS110 (03.00.00.25) Embed with CMSIS-DAP [Thu Dec 12 21:14:40 2024] usb 2-1: Manufacturer: Texas Instruments [Thu Dec 12 21:14:40 2024] usb 2-1: SerialNumber: L1100L7S [Thu Dec 12 21:14:40 2024] hid-generic 0003:0451:BEF3.0004: hiddev0,hidraw0: USB HID v1.11 Device [Texas Instruments XDS110 (03.00.00.25) Embed with CMSIS-DAP] on usb-0000:01:1b.0-1/input5 -
Das ist nur der Debugger.
Keine Ahnung, warum das eigentliche Device nicht gesehen wird.
Verwendest du da einen USB-Hub oder sowas? Stick am Verlängerungskabel? -
@thomas-braun sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Das ist nur der Debugger.
Keine Ahnung, warum das eigentliche Device nicht gesehen wird.
Verwendest du da einen USB-Hub oder sowas? Stick am Verlängerungskabel?Es ist ein kurzes USB-Verlängerungskabel dazwischen. Aber diese Konstellation hat an der vorherigen Hardware genauso funktioniert.
Warum erhalte ich keine Ausgabe durch ls /dev/serial/by-id
Sondern nur die Meldung "ls: cannot access '/dev/serial/by-id': No such file or directory" ? -
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Warum erhalte ich keine Ausgabe durch ls /dev/serial/by-id
Weil der Kernel/udev das Gerät nicht als serielles Gerät erkennt und deswegen auch die Links nicht angelegt werden.
-
@thomas-braun sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Warum erhalte ich keine Ausgabe durch ls /dev/serial/by-id
Weil der Kernel/udev das Gerät nicht als serielles Gerät erkennt und deswegen auch die Links nicht angelegt werden.
Kann ich noch was machen oder prüfen?
Ich finde es ja sehr merkwürdig, dass es nicht funktioniert.Ich habe eine neue VM mit einer anderen Version (22.04) von Ubuntu aufgesetzt.
Gleiches Problem.root@iobroker:~# lsusb Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 0451:bef3 Texas Instruments, Inc. CC1352R1 Launchpad Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub root@iobroker:~# ls -l /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directory root@iobroker:~
