USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id
-
@n811e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
sudo mv /etc/apt/trusted.gpg /etc/apt/trusted.gpg.d/ sudo apt update sudo apt full-upgrade -
ok, habe ich so gemacht
Zigbee bleibt aber auch nach einem Neustart Gelb
-
-
@thomas-braun said in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
iob diag
da kommt folgendes raus:
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.21-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 21:17:24 up 52 min, 2 users, load average: 1.87, 1.77, 1.70 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2024-01-30 21:17:25 CET Universal time: Tue 2024-01-30 20:17:25 UTC RTC time: Tue 2024-01-30 20:17:25 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 8.3G 2.4G 5.7G 1.0M 355M 5.8G Swap: 104M 0B 104M Total: 8.4G 2.4G 5.8G 7898 M total memory 2320 M used memory 106 M active memory 2196 M inactive memory 5464 M free memory 32 M buffer memory 306 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 8.0G 105G 8% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 912K 1.6G 1% /run tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Jan 30 20:24:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:CB:3B:DC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=4927e89a-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Jan 30 20:24:32 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Jan 30 20:24:32 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Jan 30 20:24:36 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 2.0G /var/ 1.1G /var/log/journal/ce513f1a44ff4c9dbd382eb66e08c51e 1.1G /var/log/journal 1.1G /var/log 709M /var/lib Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 93M /opt/iobroker/backups/ 4.0K /opt/iobroker/backups/redistmp /opt/iobroker/iobroker-data: 477M /opt/iobroker/iobroker-data/ 317M /opt/iobroker/iobroker-data/files 102M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 34M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 27M /opt/iobroker/iobroker-data/files/material/static/js/2.73100bd6.chunk.js.map 25M /opt/iobroker/iobroker-data/states.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_46f93a68f7d8eb11893d0815b9da5f8b-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://security.debian.org/debian-security bookworm-security/main armhf Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 1 Adapter State + system.adapter.admin.3 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.device-watcher.0 : device-watcher : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 12010 + system.adapter.hm-rpc.2 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.klf200.0 : klf200 : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : raspberrypi - enabled + system.adapter.omada.0 : omada : raspberrypi - enabled, port: 443 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.pushover.0 : pushover : raspberrypi - enabled + system.adapter.samsung.0 : samsung : raspberrypi - enabled + system.adapter.samsung_tizen.0 : samsung_tizen : raspberrypi - enabled, port: 8002 + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled + system.adapter.upnp.0 : upnp : raspberrypi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : raspberrypi - enabled + system.adapter.worx.0 : worx : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_46f93a68f7d8eb11893d0815b9da5f8b-if00-port0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.3 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 12010 + system.adapter.hm-rpc.2 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.omada.0 : omada : raspberrypi - enabled, port: 443 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.samsung_tizen.0 : samsung_tizen : raspberrypi - enabled, port: 8002 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_46f93a68f7d8eb11893d0815b9da5f8b-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.15 , installed 6.12.0 [Updatable] Adapter "alexa2" : 3.26.4 , installed 3.26.3 [Updatable] Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "device-watcher": 2.9.6 , installed 2.9.6 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.5 Adapter "ecovacs-deebot": 1.4.13 , installed 1.4.13 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.16.0 , installed 1.15.19 [Updatable] Adapter "homeconnect" : 1.3.0 , installed 1.3.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "klf200" : 1.1.2 , installed 1.1.2 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "onvif" : 1.1.1 , installed 1.1.1 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "samsung" : 0.5.11 , installed 0.5.11 Adapter "samsung_tizen": 1.0.0 , installed 1.0.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.15.0 , installed 3.15.0 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.3.0 , installed 1.3.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.2.3 , installed 6.1.10 [Updatable] Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.10 , installed 2.5.8 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Adapter "zigbee2mqtt" : 2.13.4 , installed 2.13.4 Objects and States Please stand by - This may take a while Objects: 19613 States: 15311 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://security.debian.org/debian-security bookworm-security InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:6 https://apt.pivccu.de/piVCCU stable InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 19220 2620/io.mqtt.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 19188 2568/io.shelly.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 21636 2483/io.sonoff.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 17641 964/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 17653 964/iobroker.js-con tcp 0 0 10.0.3.1:53 0.0.0.0:* LISTEN 0 14899 1035/dnsmasq tcp 0 0 192.168.2.113:9292 0.0.0.0:* LISTEN 1001 18414 2281/io.hm-rpc.2 tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 24624 2907/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17410 1024/sshd: /usr/sbi tcp 0 0 192.168.2.113:12010 0.0.0.0:* LISTEN 1001 17407 2232/io.hm-rpc.1 tcp 0 0 192.168.2.113:12001 0.0.0.0:* LISTEN 1001 19532 2200/io.hm-rpc.0 tcp6 0 0 :::8095 :::* LISTEN 1001 23137 3015/io.onvif.0 tcp6 0 0 :::8082 :::* LISTEN 1001 21252 2795/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 17072 1811/io.admin.3 tcp6 0 0 :::8000 :::* LISTEN 1001 25799 2868/io.upnp.0 tcp6 0 0 :::46799 :::* LISTEN 1001 20335 2808/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 17412 1024/sshd: /usr/sbi udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 23644 2949/io.wled.0 udp 0 0 192.168.2.113:5353 0.0.0.0:* 1001 20016 2512/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12028 403/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 21502 2868/io.upnp.0 udp 0 0 0.0.0.0:35724 0.0.0.0:* 1001 23568 2868/io.upnp.0 udp 0 0 0.0.0.0:40457 0.0.0.0:* 108 12030 403/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 21897 2633/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 21898 2633/io.tuya.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 20629 2412/io.shelly.0 udp 0 0 10.0.3.1:53 0.0.0.0:* 0 14898 1035/dnsmasq udp 0 0 0.0.0.0:67 0.0.0.0:* 0 14895 1035/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 0 909 846/dhclient udp6 0 0 :::51412 :::* 108 12031 403/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12029 403/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-30 21:14:11.605 - error: shelly.1 (2568) [MQTT] Wrong MQTT authentification of client "shellyplus1-a8032abcbcd8" 2024-01-30 21:14:11.628 - info: shelly.1 (2568) [MQTT] Client Close: (shellyplus1 / shellyplus1-a8032abcbcd8 / shellyplus1#a8032abcbcd8#1) (false) 2024-01-30 21:14:39.489 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:15:06.296 - error: shelly.1 (2568) [MQTT] Wrong MQTT authentification of client "shellyplus1-a8032abcbcd8" 2024-01-30 21:15:06.325 - info: shelly.1 (2568) [MQTT] Client Close: (shellyplus1 / shellyplus1-a8032abcbcd8 / shellyplus1#a8032abcbcd8#1) (false) 2024-01-30 21:15:09.499 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:15:15.639 - info: tr-064.0 (2512) forEachConfiguredDevice: in GetSpecificHostEntry 13(fritz.box/08:96:D7:8B:8C:54) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2024-01-30 21:15:39.543 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:16:02.990 - error: shelly.1 (2568) [MQTT] Wrong MQTT authentification of client "shellyplus1-a8032abcbcd8" 2024-01-30 21:16:03.009 - info: shelly.1 (2568) [MQTT] Client Close: (shellyplus1 / shellyplus1-a8032abcbcd8 / shellyplus1#a8032abcbcd8#1) (false) 2024-01-30 21:16:09.575 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:16:39.565 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:16:47.975 - info: tr-064.0 (2512) forEachConfiguredDevice: in GetSpecificHostEntry 13(fritz.box/08:96:D7:8B:8C:54) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2024-01-30 21:16:59.510 - error: shelly.1 (2568) [MQTT] Wrong MQTT authentification of client "shellyplus1-a8032abcbcd8" 2024-01-30 21:16:59.532 - info: shelly.1 (2568) [MQTT] Client Close: (shellyplus1 / shellyplus1-a8032abcbcd8 / shellyplus1#a8032abcbcd8#1) (false) 2024-01-30 21:17:09.594 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:17:39.602 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:17:56.062 - error: shelly.1 (2568) [MQTT] Wrong MQTT authentification of client "shellyplus1-a8032abcbcd8" 2024-01-30 21:17:56.088 - info: shelly.1 (2568) [MQTT] Client Close: (shellyplus1 / shellyplus1-a8032abcbcd8 / shellyplus1#a8032abcbcd8#1) (false) 2024-01-30 21:18:09.613 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:18:19.159 - info: tr-064.0 (2512) forEachConfiguredDevice: in GetSpecificHostEntry 13(fritz.box/08:96:D7:8B:8C:54) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2024-01-30 21:18:39.618 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true 2024-01-30 21:18:55.875 - error: shelly.1 (2568) [MQTT] Wrong MQTT authentification of client "shellyplus1-a8032abcbcd8" 2024-01-30 21:18:55.894 - info: shelly.1 (2568) [MQTT] Client Close: (shellyplus1 / shellyplus1-a8032abcbcd8 / shellyplus1#a8032abcbcd8#1) (false) 2024-01-30 21:19:09.575 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:trueWert:system.adapter.shelly.1bestätigt:true============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
-
Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.21-v7l+ Architecture: arm Installation: native Kernel: armv7l Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 5 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.3G 2.5G 5.6G 1.0M 472M 5.8G Swap: 104M 0B 104M Total: 8.4G 2.5G 5.7G Active iob-Instances: 40 Active repo(s): stable ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.3 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 19613 States: 15311 Size of iob-Database: 34M /opt/iobroker/iobroker-data/objects.jsonl 4.1M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
-
Und der Adapter 'Kaltstart' sieht im Log wie aus?
Instanz stoppen,
iob logs --watch | uniqanschauen, Instanz wieder starten.
-
Was soll ich denn alles kopieren, nachdem ich iob logs --watch | uniq eingegeben habe?
Der hört ja nie auf, oder wie verstehe ich das? -
@n811e den Start der Instanz, die du extra vorher gestoppt hast
-
@n811e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Der hört ja nie auf, oder wie verstehe ich das?
Mit
Strg-Chört 'der' auch wieder auf das Log anzuzeigen. -
@thomas-braun said in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
iob logs --watch | uniq
So, jetzt habe ichs:
2024-01-31 20:02:23.295 - info: host.raspberrypi "system.adapter.zigbee.0" enabled 2024-01-31 20:02:24.689 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 17095 2024-01-31 20:02:37.047 - info: zigbee.0 (17095) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-01-31 20:02:37.259 - info: zigbee.0 (17095) delete old Backup files. keep only last 10 2024-01-31 20:02:37.265 - info: zigbee.0 (17095) Starting Zigbee npm ... 2024-01-31 20:02:37.047 - info: zigbee.0 (17095) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-01-31 20:02:37.259 - info: zigbee.0 (17095) delete old Backup files. keep only last 10 2024-01-31 20:02:37.265 - info: zigbee.0 (17095) Starting Zigbee npm ... 2024-01-31 20:02:38.106 - info: zigbee.0 (17095) Installed Version: iobroker.zigbee@1.10.1 2024-01-31 20:03:44.528 - error: zigbee.0 (17095) Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby" 2024-01-31 20:03:44.531 - error: zigbee.0 (17095) Failed to start Zigbee 2024-01-31 20:03:44.532 - error: zigbee.0 (17095) Error herdsman start 2024-01-31 20:03:44.528 - error: zigbee.0 (17095) Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby" -
@n811e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
2024-01-31 20:03:44.528 - error: zigbee.0 (17095) Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby"
Versuch doch mal eine andere PanId, offenbar funkt da noch ein anderes Netzwerk in deinen Bereich.
Kann sein, dass du anschließend alles neu anlernen musst. -
Das ist ja verrückt!!! Das klappt jetzt wieder. Damit hätte ich nicht gerechnet.
Vielen Dank an alle, insbesondere @thomas-braun für die viele Mühe, die ihr euch gemacht habt.
Dankeschön
-
Leider wieder am selben Punkt
iob logs --watch | uniq 2024-02-01 14:04:36.400 - info: host.raspberrypi "system.adapter.zigbee.0" enabled 2024-02-01 14:04:37.659 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 26738 2024-02-01 14:04:46.093 - info: zigbee.0 (26738) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-02-01 14:04:46.235 - info: zigbee.0 (26738) delete old Backup files. keep only last 10 2024-02-01 14:04:46.239 - info: zigbee.0 (26738) Starting Zigbee npm ... 2024-02-01 14:04:46.707 - info: zigbee.0 (26738) Installed Version: iobroker.zigbee@1.10.1 2024-02-01 14:04:47.197 - info: javascript.0 (1828) script.js.Beleuchtung.Debug_Licht: Wert:falseWert:system.adapter.shelly.1bestätigt:true 2024-02-01 14:04:47.679 - error: zigbee.0 (26738) Configuration is not consistent with adapter state/backup! 2024-02-01 14:04:47.679 - error: zigbee.0 (26738) - PAN ID: configured=6557, adapter=6556 2024-02-01 14:04:47.680 - error: zigbee.0 (26738) - Extended PAN ID: configured=ddd3dddfddddaddd, adapter=ddd3dddfddddaddd 2024-02-01 14:04:47.681 - error: zigbee.0 (26738) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d 2024-02-01 14:04:47.682 - error: zigbee.0 (26738) - Channel List: configured=11, adapter=11 2024-02-01 14:04:47.683 - error: zigbee.0 (26738) Please update configuration to prevent further issues. 2024-02-01 14:04:47.684 - error: zigbee.0 (26738) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. 2024-02-01 14:04:47.685 - error: zigbee.0 (26738) Re-commissioning your network will require re-pairing of all devices! 2024-02-01 14:04:47.814 - error: zigbee.0 (26738) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" 2024-02-01 14:04:47.814 - error: zigbee.0 (26738) Failed to start Zigbee 2024-02-01 14:04:47.816 - error: zigbee.0 (26738) Error herdsman start 2024-02-01 14:04:46.093 - info: zigbee.0 (26738) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-02-01 14:04:46.235 - info: zigbee.0 (26738) delete old Backup files. keep only last 10 2024-02-01 14:04:46.239 - info: zigbee.0 (26738) Starting Zigbee npm ... 2024-02-01 14:04:46.707 - info: zigbee.0 (26738) Installed Version: iobroker.zigbee@1.10.1 2024-02-01 14:04:47.679 - error: zigbee.0 (26738) Configuration is not consistent with adapter state/backup! 2024-02-01 14:04:47.679 - error: zigbee.0 (26738) - PAN ID: configured=6557, adapter=6556 2024-02-01 14:04:47.680 - error: zigbee.0 (26738) - Extended PAN ID: configured=ddd3dddfddddaddd, adapter=ddd3dddfddddaddd 2024-02-01 14:04:47.681 - error: zigbee.0 (26738) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d 2024-02-01 14:04:47.682 - error: zigbee.0 (26738) - Channel List: configured=11, adapter=11 2024-02-01 14:04:47.683 - error: zigbee.0 (26738) Please update configuration to prevent further issues. 2024-02-01 14:04:47.684 - error: zigbee.0 (26738) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json. 2024-02-01 14:04:47.685 - error: zigbee.0 (26738) Re-commissioning your network will require re-pairing of all devices! 2024-02-01 14:04:47.814 - error: zigbee.0 (26738) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information" 2024-02-01 14:04:47.814 - error: zigbee.0 (26738) Failed to start Zigbee 2024-02-01 14:04:47.816 - error: zigbee.0 (26738) Error herdsman start 2024-02-01 14:04:57.822 - info: zigbee.0 (26738) Try to reconnect. 1 attempts left 2024-02-01 14:04:57.823 - info: zigbee.0 (26738) Starting Zigbee npm ... 2024-02-01 14:04:57.841 - info: zigbee.0 (26738) Installed Version: iobroker.zigbee@1.10.1 2024-02-01 14:04:58.109 - error: zigbee.0 (26738) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2024-02-01 14:04:58.112 - error: zigbee.0 (26738) Failed to start Zigbee 2024-02-01 14:04:58.112 - error: zigbee.0 (26738) Error herdsman start 2024-02-01 14:04:57.822 - info: zigbee.0 (26738) Try to reconnect. 1 attempts left 2024-02-01 14:04:57.823 - info: zigbee.0 (26738) Starting Zigbee npm ... 2024-02-01 14:04:57.841 - info: zigbee.0 (26738) Installed Version: iobroker.zigbee@1.10.1 2024-02-01 14:04:58.109 - error: zigbee.0 (26738) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2024-02-01 14:04:58.112 - error: zigbee.0 (26738) Failed to start Zigbee 2024-02-01 14:04:58.112 - error: zigbee.0 (26738) Error herdsman start -
@n811e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
PAN ID: configured=6557, adapter=6556
Die Werte müssen übereinstimmen.
-
die PAN ID, stelle ich ja unter Einstellungen ein, aber wo kann ich den Wert für den Adapter ändern?
-
? Gar nicht. Aber die PAN-Id in den Einstellungen muss auf den Wert im Adapter geändert werden.
-
Ich habe leider auch das problem mit
ls: cannot access '/dev/serial/by-ids': No such file or directoryIch ziehe gerade mit iobroker um und habe iob neu auf ubuntu 22.04 installiert und anschließend ein iob backup eingespielt.
Ausgang von iob diag lautet:
========== Start marking the full check here =========== ```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer-vm Chassis: vm 🖴 Virtualization: kvm Operating System: Ubuntu 24.04.1 LTS Kernel: Linux 6.8.0-50-generic Architecture: x86-64 Hardware Vendor: QEMU Hardware Model: Standard PC _i440FX + PIIX, 1996_ Firmware Version: 4.2023.08-4 Firmware Date: Thu 2024-02-15 Firmware Age: 9month 3w 6d OS is similar to: debian model name : Common KVM processor Docker : false Virtualization : kvm Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 23:59:11 up 21 min, 1 user, load average: 0.53, 0.40, 0.45 CPU threads: 8 *** LIFE CYCLE STATUS *** Operating System is the current Ubuntu LTS release codenamed 'noble'! *** TIME AND TIMEZONES *** Local time: Wed 2024-12-11 23:59:11 CET Universal time: Wed 2024-12-11 22:59:11 UTC RTC time: Wed 2024-12-11 22:59:10 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi sudo users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 10G 3.0G 6.9G 5.3M 846M 7.5G Swap: 0B 0B 0B Total: 10G 3.0G 6.9G Active iob-Instances: 58 9938 M total memory 2820 M used memory 2578 M active memory 460 M inactive memory 6572 M free memory 54 M buffer memory 752 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 23:59:11 up 21 min, 1 user, load average: 0.53, 0.40, 0.45 Tasks: 179 total, 1 running, 178 sleeping, 0 stopped, 0 zombie %Cpu(s): 20.5 us, 4.5 sy, 0.0 ni, 75.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 9938.9 total, 6572.1 free, 2820.9 used, 807.5 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 7118.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on tmpfs tmpfs 994M 1.1M 993M 1% /run efivarfs efivarfs 256K 20K 232K 8% /sys/firmware/efi/efivars /dev/sda1 ext4 51G 6.8G 45G 14% / tmpfs tmpfs 4.9G 0 4.9G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/sda16 ext4 881M 112M 708M 14% /boot /dev/sda15 vfat 105M 6.1M 99M 6% /boot/efi tmpfs tmpfs 994M 12K 994M 1% /run/user/0 Messages concerning ext4 filesystem in dmesg: [Wed Dec 11 23:38:08 2024] EXT4-fs (sda1): mounted filesystem 428c45af-c748-4f29-9fe5-d56aa4a3f75e ro with ordered data mode. Quota mode: none. [Wed Dec 11 23:38:09 2024] EXT4-fs (sda1): re-mounted 428c45af-c748-4f29-9fe5-d56aa4a3f75e r/w. Quota mode: none. [Wed Dec 11 23:38:11 2024] EXT4-fs (sda16): mounted filesystem a4ce610e-4a3c-4ed2-8852-b138eade5b0b r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,relatime,discard,errors=remount-ro,commit=30 `-/boot /dev/sda16 ext4 rw,relatime `-/boot/efi /dev/sda15 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 687M /var/ 344M /var/cache 314M /var/cache/apt 216M /var/cache/apt/archives 199M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 19.2M in the file system. /opt/iobroker/backups: 27M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 213M /opt/iobroker/iobroker-data/ 176M /opt/iobroker/iobroker-data/files 158M /opt/iobroker/iobroker-data/files/admin.admin 157M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 157M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 36M /opt/iobroker/iobroker-data/objects.jsonl 7.4M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_node_modules_mui_icons-material_esm_index_js.d7ed606b.chunk.js.map 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.e5b40573.chunk.js.map 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.8219fdd8.chunk.js.map 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.358dc38e.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 18.19.1+dfsg-6ubuntu5 500 500 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: ioBroker-Rock ioBroker-Rock (version: 7.0.6, hostname: ioBroker-Rock , alive, uptime: 1247) raspberrypi-display1 raspberrypi-display1 (version: 7.0.2, hostname: raspberrypi-display1, alive, uptime: 1231) raspberrypi-display2 raspberrypi-display2 (version: 7.0.2, hostname: raspberrypi-display2, alive, uptime: 1233) raspberrypi-display3 raspberrypi-display3 (version: 4.0.24, hostname: raspberrypi-display3, alive, uptime: 1237) raspberrypi-display4 raspberrypi-display4 (version: 5.0.19, hostname: raspberrypi-display4, alive, uptime: 1239) raspberrypi-display5 raspberrypi-display5 (version: 7.0.2, hostname: raspberrypi-display5, alive, uptime: 1239) raspberrypi-slave raspberrypi-slave (version: 5.0.8, hostname: raspberrypi-slave, alive, uptime: 1235) Core adapters versions js-controller: 7.0.6 admin: 7.4.4 javascript: 8.8.3 nodejs modules from github: 3 +-- iobroker.energiefluss-erweitert@0.6.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss-erweitert.git#a898e0cd728900620b9bfea0f1710d8720ebf82f) | +-- node-milight-promise@0.3.2 (git+ssh://git@github.com/Steiger04/node-milight-promise.git#f1089feac9b7990727adf2016891029436729d33) | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.2 : admin : ioBroker-Rock - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.3 : admin : ioBroker-Rock - enabled, port: 8900, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : ioBroker-Rock - enabled + system.adapter.alexa2.0 : alexa2 : ioBroker-Rock - enabled system.adapter.backitup.0 : backitup : ioBroker-Rock - disabled + system.adapter.cloud.0 : cloud : ioBroker-Rock - enabled system.adapter.daswetter.0 : daswetter : ioBroker-Rock - enabled + system.adapter.device-reminder.0 : device-reminder : ioBroker-Rock - enabled + system.adapter.device-watcher.0 : device-watcher : ioBroker-Rock - enabled + system.adapter.discovergy.0 : discovergy : ioBroker-Rock - enabled system.adapter.discovery.0 : discovery : ioBroker-Rock - disabled system.adapter.dwd.0 : dwd : ioBroker-Rock - enabled + system.adapter.echarts.0 : echarts : ioBroker-Rock - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker-Rock - enabled system.adapter.feiertage.0 : feiertage : ioBroker-Rock - enabled system.adapter.flot.0 : flot : ioBroker-Rock - enabled + system.adapter.hass.0 : hass : ioBroker-Rock - enabled, port: 8123 + system.adapter.heatingcontrol.1 : heatingcontrol : ioBroker-Rock - enabled + system.adapter.hm-rega.0 : hm-rega : ioBroker-Rock - enabled + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : ioBroker-Rock - enabled, port: 0 system.adapter.hoover.0 : hoover : ioBroker-Rock - disabled system.adapter.ical.0 : ical : ioBroker-Rock - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: ioBroker-Rock - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker-Rock - enabled system.adapter.icons-material-png.0 : icons-material-png : ioBroker-Rock - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker-Rock - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker-Rock - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : ioBroker-Rock - enabled + system.adapter.influxdb.0 : influxdb : ioBroker-Rock - enabled, port: 8086 + system.adapter.javascript.0 : javascript : ioBroker-Rock - enabled + system.adapter.javascript.2 : javascript : raspberrypi-display1 - enabled + system.adapter.javascript.3 : javascript : raspberrypi-display4 - enabled + system.adapter.javascript.4 : javascript : raspberrypi-display2 - enabled + system.adapter.javascript.5 : javascript : raspberrypi-display5 - enabled + system.adapter.midea.0 : midea : ioBroker-Rock - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker-Rock - disabled, port: 54321, bind: 0.0.0.0 system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker-Rock - disabled, port: 54321, bind: 0.0.0.0 + system.adapter.mihome.0 : mihome : ioBroker-Rock - enabled, port: 9898, bind: 192.168.3.100 + system.adapter.milight-smart-light.0 : milight-smart-light : ioBroker-Rock - enabled + system.adapter.modbus.0 : modbus : ioBroker-Rock - enabled system.adapter.mqtt-client.0 : mqtt-client : ioBroker-Rock - disabled, port: 1883 + system.adapter.mqtt.0 : mqtt : ioBroker-Rock - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.musiccast.0 : musiccast : ioBroker-Rock - enabled + system.adapter.nut.0 : nut : ioBroker-Rock - enabled system.adapter.openweathermap.0 : openweathermap : ioBroker-Rock - enabled + system.adapter.proxmox.0 : proxmox : ioBroker-Rock - enabled, port: 8006 + system.adapter.rpi2.1 : rpi2 : raspberrypi-display1 - enabled + system.adapter.rpi2.2 : rpi2 : raspberrypi-display2 - enabled + system.adapter.rpi2.3 : rpi2 : raspberrypi-display3 - enabled + system.adapter.rpi2.4 : rpi2 : raspberrypi-display4 - enabled + system.adapter.rpi2.5 : rpi2 : raspberrypi-display5 - enabled + system.adapter.sainlogic.0 : sainlogic : ioBroker-Rock - enabled, port: 45000, bind: 192.168.3.100 + system.adapter.scenes.0 : scenes : ioBroker-Rock - enabled + system.adapter.shelly.0 : shelly : ioBroker-Rock - enabled, port: 1890, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Rock - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : ioBroker-Rock - enabled system.adapter.simple-api.0 : simple-api : ioBroker-Rock - disabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartcontrol.0 : smartcontrol : ioBroker-Rock - enabled + system.adapter.smartmeter.0 : smartmeter : ioBroker-Rock - enabled + system.adapter.sonoff.0 : sonoff : ioBroker-Rock - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker-Rock - enabled system.adapter.sprinklecontrol.0 : sprinklecontrol : ioBroker-Rock - disabled + system.adapter.statistics.0 : statistics : ioBroker-Rock - enabled + system.adapter.synology.0 : synology : ioBroker-Rock - enabled, port: 5001 + system.adapter.telegram.0 : telegram : ioBroker-Rock - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : ioBroker-Rock - enabled system.adapter.unifi.0 : unifi : ioBroker-Rock - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : ioBroker-Rock - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : ioBroker-Rock - enabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: ioBroker-Rock - enabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: ioBroker-Rock - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: ioBroker-Rock - enabled + system.adapter.vis-2.0 : vis-2 : ioBroker-Rock - enabled system.adapter.vis-bars.0 : vis-bars : ioBroker-Rock - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : ioBroker-Rock - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : ioBroker-Rock - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : ioBroker-Rock - enabled system.adapter.vis-history.0 : vis-history : ioBroker-Rock - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker-Rock - enabled system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker-Rock - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker-Rock - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker-Rock - enabled system.adapter.vis-justgage.0 : vis-justgage : ioBroker-Rock - enabled system.adapter.vis-keyboard.0 : vis-keyboard : ioBroker-Rock - enabled system.adapter.vis-material.0 : vis-material : ioBroker-Rock - enabled system.adapter.vis-metro.0 : vis-metro : ioBroker-Rock - enabled system.adapter.vis-players.0 : vis-players : ioBroker-Rock - enabled system.adapter.vis-plumb.0 : vis-plumb : ioBroker-Rock - enabled system.adapter.vis-rgraph.0 : vis-rgraph : ioBroker-Rock - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker-Rock - enabled system.adapter.vis-weather.0 : vis-weather : ioBroker-Rock - enabled system.adapter.vis.0 : vis : ioBroker-Rock - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker-Rock - enabled system.adapter.web-speedy.0 : web-speedy : ioBroker-Rock - disabled + system.adapter.web.0 : web : ioBroker-Rock - enabled, port: 8082, bind: 192.168.3.100 (SSL), run as: admin + system.adapter.web.1 : web : ioBroker-Rock - enabled, port: 8083, bind: 192.168.3.100, run as: admin + system.adapter.wolf-smartset.0 : wolf-smartset : ioBroker-Rock - enabled system.adapter.worx.0 : worx : ioBroker-Rock - disabled + system.adapter.yamaha.0 : yamaha : ioBroker-Rock - enabled + system.adapter.yeelight-2.0 : yeelight-2 : ioBroker-Rock - enabled system.adapter.yr.0 : yr : ioBroker-Rock - enabled + system.adapter.zigbee.0 : zigbee : ioBroker-Rock - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.2 : admin : ioBroker-Rock - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.3 : admin : ioBroker-Rock - enabled, port: 8900, bind: 0.0.0.0, run as: admin + system.adapter.hass.0 : hass : ioBroker-Rock - enabled, port: 8123 + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : ioBroker-Rock - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : ioBroker-Rock - enabled, port: 8086 + system.adapter.mihome.0 : mihome : ioBroker-Rock - enabled, port: 9898, bind: 192.168.3.100 + system.adapter.mqtt.0 : mqtt : ioBroker-Rock - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.proxmox.0 : proxmox : ioBroker-Rock - enabled, port: 8006 + system.adapter.sainlogic.0 : sainlogic : ioBroker-Rock - enabled, port: 45000, bind: 192.168.3.100 + system.adapter.shelly.0 : shelly : ioBroker-Rock - enabled, port: 1890, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Rock - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : ioBroker-Rock - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : ioBroker-Rock - enabled, port: 5001 + system.adapter.telegram.0 : telegram : ioBroker-Rock - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker-Rock - enabled, port: 8082, bind: 192.168.3.100 (SSL), run as: admin + system.adapter.web.1 : web : ioBroker-Rock - enabled, port: 8083, bind: 192.168.3.100, run as: admin + system.adapter.zigbee.0 : zigbee : ioBroker-Rock - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Instances Used repository: beta Adapter "admin" : 7.4.4 , installed 7.4.4 Adapter "alarm" : 3.6.4 , installed 3.6.4 Adapter "alexa2" : 3.26.7 , installed 3.26.7 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.2.1 , installed 3.2.1 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "discovergy" : 0.5.13 , installed 0.5.13 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "energiefluss-erweitert": 0.6.0, installed 0.6.0 Adapter "feiertage" : 1.2.0 , installed 1.2.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "hass" : 1.4.0 , installed 1.4.0 Adapter "heatingcontrol": 2.12.13 , installed 2.12.13 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "hoover" : 0.1.3 , installed 0.1.3 Adapter "ical" : 1.16.1 , installed 1.16.1 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "midea" : 0.0.7 , installed 0.0.7 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "milight-smart-light": 1.2.2, installed 1.2.2 Adapter "modbus" : 6.4.0 , installed 6.4.0 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "mqtt-client" : 2.1.0 , installed 2.1.0 Adapter "musiccast" : 1.1.4 , installed 1.1.4 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "proxmox" : 2.3.0 , installed 2.3.0 Adapter "sainlogic" : 0.11.4 , installed 0.11.4 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 8.5.1 , installed 8.5.1 Adapter "shuttercontrol": 1.8.5 , installed 1.8.5 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 3.1.0 , installed 3.1.0 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.11.1 , installed 2.11.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 1.1.1, installed 1.1.1 Adapter "vis-2-widgets-inventwo": 0.1.11, installed 0.1.11 Adapter "vis-2-widgets-jaeger-design": 1.3.9, installed 1.3.9 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.10.1 , installed 1.10.1 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "vw-connect" : 0.6.1 , installed 0.6.1 Adapter "web" : 6.3.1 , installed 6.3.1 Adapter "web-speedy" : 0.2.0 , installed 0.2.0 Adapter "wolf-smartset": 1.2.3 , installed 1.2.3 Adapter "worx" : 3.1.1 , installed 3.1.1 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yamaha" : 0.5.4 , installed 0.5.4 Adapter "yeelight-2" : 1.4.0 , installed 1.4.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.13 , installed 1.10.13 Objects and States Please stand by - This may take a while Objects: 39194 States: 36289 *** OS-Repositories and Updates *** Hit:1 http://archive.ubuntu.com/ubuntu noble InRelease Hit:2 http://archive.ubuntu.com/ubuntu noble-updates InRelease Hit:3 http://archive.ubuntu.com/ubuntu noble-backports InRelease Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:5 http://security.ubuntu.com/ubuntu noble-security InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.3.100:2010 0.0.0.0:* LISTEN 1001 11540 1563/io.hm-rpc.2 tcp 0 0 192.168.3.100:2001 0.0.0.0:* LISTEN 1001 9811 1487/io.hm-rpc.0 tcp 0 0 192.168.3.100:8701 0.0.0.0:* LISTEN 1001 11703 1683/io.hm-rpc.1 tcp 0 0 192.168.3.100:45000 0.0.0.0:* LISTEN 1001 12502 1752/io.sainlogic.0 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 715 1/init tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 8188 1273/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 10687 1373/io.mqtt.0 tcp 0 0 0.0.0.0:1899 0.0.0.0:* LISTEN 1001 11519 1548/io.shelly.1 tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 991 6774 633/systemd-resolve tcp 0 0 192.168.3.100:8083 0.0.0.0:* LISTEN 1001 13321 1917/io.web.1 tcp 0 0 192.168.3.100:8082 0.0.0.0:* LISTEN 1001 12687 1977/io.web.0 tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 991 6772 633/systemd-resolve tcp6 0 0 :::8900 :::* LISTEN 1001 8070 1089/io.admin.3 tcp6 0 0 :::22 :::* LISTEN 0 8316 1/init tcp6 0 0 :::111 :::* LISTEN 0 3605 1/init tcp6 0 0 :::8081 :::* LISTEN 1001 8885 973/io.admin.2 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 11624 1638/io.shelly.0 udp 0 0 0.0.0.0:47970 0.0.0.0:* 1001 11834 1812/io.milight-sma udp 0 0 127.0.0.54:53 0.0.0.0:* 991 6773 633/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 991 6771 633/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 716 1/init udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 10200 1868/io.musiccast.0 udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 11644 1653/io.mihome.0 udp6 0 0 :::111 :::* 0 717 1/init *** Log File - Last 25 Lines *** port: 80 } 2024-12-11 23:59:05.006 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:07.010 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:09.012 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:10.542 - info: influxdb.0 (1202) Store 272 buffered influxDB history points 2024-12-11 23:59:11.015 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:13.018 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:15.019 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:17.022 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:19.024 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:21.027 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:23.030 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:25.031 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:27.034 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:29.036 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:31.039 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:33.041 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:35.044 - warn: smartmeter.0 (1333) No or too long answer from Serial Device after last request. 2024-12-11 23:59:37.046 - warn: smartmeter.0 (1333) No or too long answer from Serial D Copy text starting here: ```bash ======================= SUMMARY ======================= v.2024-10-19 Static hostname: iobroker Icon name: computer-vm Chassis: vm 🖴 Virtualization: kvm Operating System: Ubuntu 24.04.1 LTS Kernel: Linux 6.8.0-50-generic Architecture: x86-64 Hardware Vendor: QEMU Hardware Model: Standard PC _i440FX + PIIX, 1996_ Firmware Version: 4.2023.08-4 Firmware Date: Thu 2024-02-15 Firmware Age: 9month 3w 6d Installation: kvm Kernel: x86_64 Userland: 64 bit Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 Recommended versions are nodejs and npm nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 10G 3.0G 6.6G 5.3M 1.1G 7.4G Swap: 0B 0B 0B Total: 10G 3.0G 6.6G Active iob-Instances: 58 Upgrade policy: none ioBroker Core: js-controller 7.0.6 admin 7.4.4 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Status admin and web instance: + system.adapter.admin.2 : admin : ioBroker-Rock - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.admin.3 : admin : ioBroker-Rock - enabled, port: 8900, bind: 0.0.0.0, run as: admin system.adapter.web-speedy.0 : web-speedy : ioBroker-Rock - disabled + system.adapter.web.0 : web : ioBroker-Rock - enabled, port: 8082, bind: 192.168.3.100 (SSL), run as: admin + system.adapter.web.1 : web : ioBroker-Rock - enabled, port: 8083, bind: 192.168.3.100, run as: admin Objects: 39194 States: 36289 Size of iob-Database: 36M /opt/iobroker/iobroker-data/objects.jsonl 768K /opt/iobroker/iobroker-data/states.jsonl Operating System is the current Ubuntu LTS release codenamed 'noble'! =================== END OF SUMMARY ======================= Mark text until here for copying ===
-
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Virtualization: kvm
Der Stick muss an die VM durchgereicht werden.
Setz den user in die Gruppe adm rein. Und warum nennt man den user überhaupt ``pi`? Ist doch nicht mal ein Raspberry...
Und bring den Versions-Zoo bei den ganzen hosts auf den gleichen aktuellen Stand.
-
@thomas-braun sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
Virtualization: kvm
Der Stick muss an die VM durchgereicht werden.
Die sind über Proxmox durchgereicht, werden über lsusb in der VM auch angezeigt.
Setz den user in die Gruppe adm rein. Und warum nennt man den user überhaupt ``pi`? Ist doch nicht mal ein Raspberry...
Kann ich machen, der User pi ist historisch mitgewandert.
Hat das mit der Gruppe adm, denn etwas mit meinem "ls: cannot access '/dev/serial/by-ids': No such file or directory" zutun? Oder wofür wird dies benötigt?Und bring den Versions-Zoo bei den ganzen hosts auf den gleichen aktuellen Stand.
Wird nach und nach, leider sind einige Distribution so alt, dass ein update nicht ohne weiteres mehr möglich ist.
-
@e-i-k-e sagte in USB Port Zuweisung, fehlendes Verzeichnis /dev/serial/by-id:
leider sind einige Distribution so al
Dann haste da viel zu lange gepennt.
Die Gruppe
admwird für administrative Dinge benötigt. Unter anderem um logfiles auch ohne root-Rechte lesen zu können.
