- ioBroker Community Home
- Deutsch
- ioBroker Allgemein
- [Gelöst] Fehler bei node red auf dem slave
NEWS
[Gelöst] Fehler bei node red auf dem slave
Geplant
Angeheftet
Gesperrt
Verschoben
ioBroker Allgemein
48
Beiträge
6
Kommentatoren
4.5k
Aufrufe
3
Watching
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
-
Habe das Slave-System nun neu aufgesetzt.
iobroker läuft und ist noch jungfreulich. Das Problem ist, ich bekomme den Slave nicht mehr mit dem Master verbunden :(Wenn ich
iobroker multihost connectbeim Slave eingebe, wird mit der Host angezeigt, aber es erscheint folgende Meldung:tim@iobroker-slave:/opt/iobroker/log $ iobroker multihost connect 1 | 10.1.0.1 | host | 10.1.0.1 | "authentication required" Please select host [1]: 1 Enter secret phrase for connection: ********************* Error: No configuration received! at file:///opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupMultihost.js:254:26 at onFinished (file:///opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/multihostClient.js:212:17) at Timeout.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/multihostClient.js:66:17) at listOnTimeout (node:internal/timers:581:17) at process.processTimers (node:internal/timers:519:7)Gleichzeitg steht beim Master dies im Log und er bricht komplett weg, dass er nicht mehr erreichbar ist.
dbTools.isLocalObjectsDbServer is not a function TypeError: dbTools.isLocalObjectsDbServer is not a function at file:///opt/iobroker/node_modules/iobroker.js-controller/src/lib/multihostServer.js:142:53 at Hash.<anonymous> (file:///opt/iobroker/node_modules/iobroker.js-controller/src/lib/multihostServer.js:98:17) at Hash.emit (node:events:518:28) at Hash.emit (node:domain:489:12) at emitReadable_ (node:internal/streams/readable:834:12) at onEofChunk (node:internal/streams/readable:812:5) at readableAddChunkPushByteMode (node:internal/streams/readable:466:5) at Hash.Readable.push (node:internal/streams/readable:392:5) at node:internal/streams/transform:141:12 at Hash._flush (node:internal/crypto/hash:104:3) TypeError: dbTools.isLocalObjectsDbServer is not a function at file:///opt/iobroker/node_modules/iobroker.js-controller/src/lib/multihostServer.js:142:53 at Hash.<anonymous> (file:///opt/iobroker/node_modules/iobroker.js-controller/src/lib/multihostServer.js:98:17) at Hash.emit (node:events:518:28) at Hash.emit (node:domain:489:12) at emitReadable_ (node:internal/streams/readable:834:12) at onEofChunk (node:internal/streams/readable:812:5) at readableAddChunkPushByteMode (node:internal/streams/readable:466:5) at Hash.Readable.push (node:internal/streams/readable:392:5) at node:internal/streams/transform:141:12 at Hash._flush (node:internal/crypto/hash:104:3)Ich muss den Docker komplett neustarten, damit ich wieder an ioBroker komme.
@hant0r sagte in Fehler bei node red auf dem slave:
Wenn ich iobroker multihost connect beim Slave eingebe, wird mit der Host angezeigt
mach es zu Fuß mit
iob setup customkein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@hant0r sagte in Fehler bei node red auf dem slave:
Wenn ich iobroker multihost connect beim Slave eingebe, wird mit der Host angezeigt
mach es zu Fuß mit
iob setup custom@homoran sagte in Fehler bei node red auf dem slave:
iob setup custom
Hat funktionert, danke dir :+1:
-
Also ioBroker Slave läuft wieder (neu augesetzt) und auch der Connect zum Master klappt.
Node-Red musste ich komplett neu installieren (also ohne restore), weil es damit nur Probleme gab.
Nachdem ich dann alle nodes wieder installiert und die Flows importiert habe, sieht alles sehr gut aus.
Ich kann auch die Settings Seite wieder erreichen :)Vielen Dank bis dahin schon einmal :+1:
Einzig was noch nicht wieder läuft ist mein ZigBee auf dem Slave.
Das liegt aber wohl daran, dass der USB Controller nicht erkannt wird und ich kein "ttyUSB" bekomme.
Suche mir gerade schon einen Wolf, aber finde noch nichts, wieso das so ist. Muss man das im System erst aktivieren oder so? -
Also ioBroker Slave läuft wieder (neu augesetzt) und auch der Connect zum Master klappt.
Node-Red musste ich komplett neu installieren (also ohne restore), weil es damit nur Probleme gab.
Nachdem ich dann alle nodes wieder installiert und die Flows importiert habe, sieht alles sehr gut aus.
Ich kann auch die Settings Seite wieder erreichen :)Vielen Dank bis dahin schon einmal :+1:
Einzig was noch nicht wieder läuft ist mein ZigBee auf dem Slave.
Das liegt aber wohl daran, dass der USB Controller nicht erkannt wird und ich kein "ttyUSB" bekomme.
Suche mir gerade schon einen Wolf, aber finde noch nichts, wieso das so ist. Muss man das im System erst aktivieren oder so?@hant0r sagte in Fehler bei node red auf dem slave:
und ich kein "ttyUSB" bekomme.
Man verwendet ja auch die 'by-id'-Links und nicht direkt die Gerätedateien.
Den richtigen Link und die Einstellungen auf dem Coordinator finden sich in der Test-Version voniob diag --unmask.
Siehe hier: -
@hant0r sagte in Fehler bei node red auf dem slave:
und ich kein "ttyUSB" bekomme.
Man verwendet ja auch die 'by-id'-Links und nicht direkt die Gerätedateien.
Den richtigen Link und die Einstellungen auf dem Coordinator finden sich in der Test-Version voniob diag --unmask.
Siehe hier:@thomas-braun sagte in Fehler bei node red auf dem slave:
@hant0r sagte in Fehler bei node red auf dem slave:
und ich kein "ttyUSB" bekomme.
Man verwendet ja auch die 'by-id'-Links und nicht direkt die Gerätedateien.
Den richtigen Link und die Einstellungen auf dem Coordinator finden sich in der Test-Version voniob diag --unhide.
Siehe hier:hmm, also einen Pfad mit serial bzw. by-id gibt es nicht..
tim@iobroker-slave:/opt/iobroker $ ls /dev/ Display all 156 possibilities? (y or n) autofs loop1 ram14 tty15 tty36 tty57 vcsa block/ loop2 ram15 tty16 tty37 tty58 vcsa1 bus/ loop3 ram2 tty17 tty38 tty59 vcsa2 cachefiles loop4 ram3 tty18 tty39 tty6 vcsa3 char/ loop5 ram4 tty19 tty4 tty60 vcsa4 console loop6 ram5 tty2 tty40 tty61 vcsa5 cpu_dma_latency loop7 ram6 tty20 tty41 tty62 vcsa6 disk/ loop-control ram7 tty21 tty42 tty63 vcsu dma_heap/ mem ram8 tty22 tty43 tty7 vcsu1 fb0 mmcblk0 ram9 tty23 tty44 tty8 vcsu2 fd/ mmcblk0p1 random tty24 tty45 tty9 vcsu3 full mmcblk0p2 shm/ tty25 tty46 ttyprintk vcsu4 gpiochip0 mqueue/ stderr tty26 tty47 urandom vcsu5 gpiochip1 null stdin tty27 tty48 vchiq vcsu6 gpiochip2 port stdout tty28 tty49 vcio vga_arbiter gpiochip4 ptmx tty tty29 tty5 vc-mem watchdog hwrng pts/ tty0 tty3 tty50 vcs watchdog0 initctl ram0 tty1 tty30 tty51 vcs1 zero input/ ram1 tty10 tty31 tty52 vcs2 kmsg ram10 tty11 tty32 tty53 vcs3 kvm ram11 tty12 tty33 tty54 vcs4 log ram12 tty13 tty34 tty55 vcs5 loop0 ram13 tty14 tty35 tty56 vcs6Im Diag steht auch:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id'mit
lsusbkommt aber:tim@iobroker-slave:/opt/iobroker $ lsusb Bus 001 Device 008: ID 10c4:ea60 Silicon Labs CP210x UART Bridge Bus 001 Device 003: ID 0424:ec00 Microchip Technology, Inc. (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Microchip Technology, Inc. (formerly SMSC) SMC9514 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub========== Start marking the full check here =========== ```bash Script v.2024-12-08 Raspbian+zigbee diag+masking *** BASE SYSTEM *** Static hostname: iobroker-slave Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 3 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:29:32 up 3:02, 1 user, load average: 1.45, 1.16, 0.87 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2024-12-09 13:29:32 CET Universal time: Mon 2024-12-09 12:29:32 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tim HOME=/home/tim GROUPS=tim adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 951M 492M 178M 36K 348M 458M Swap: 536M 22M 514M Total: 1.5G 515M 692M Active iob-Instances: 41 907 M total memory 469 M used memory 363 M active memory 276 M inactive memory 169 M free memory 28 M buffer memory 304 M swap cache 511 M total swap 21 M used swap 490 M free swap *** top - Table Of Processes *** top - 13:29:33 up 3:02, 1 user, load average: 1.57, 1.19, 0.89 Tasks: 123 total, 2 running, 121 sleeping, 0 stopped, 0 zombie %Cpu(s): 37.5 us, 12.5 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 907.2 total, 168.2 free, 470.8 used, 332.5 buff/cache MiB Swap: 512.0 total, 490.2 free, 21.8 used. 436.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System * systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 318M 0 318M 0% /dev tmpfs tmpfs 91M 860K 90M 1% /run /dev/mmcblk0p2 ext4 15G 4.0G 9.5G 30% / tmpfs tmpfs 454M 0 454M 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/mmcblk0p1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 91M 0 91M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 9 10:27:18 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=782cb9f1-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 9 10:27:22 2024] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none. [Mon Dec 9 10:27:25 2024] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 296M /var/cache 290M /var/cache/apt 177M /var/cache/apt/archives 164M /var/lib Archived and active journals take up 52.0M in the file system. /opt/iobroker/backups: 176K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 137M /opt/iobroker/iobroker-data/ 72M /opt/iobroker/iobroker-data/node-red 71M /opt/iobroker/iobroker-data/node-red/node_modules 60M /opt/iobroker/iobroker-data/files 31M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js The five largest files in iobroker-data are: 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.0c96b194.chunk.js.map 5.6M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-f0ed96.6c33ff1f.chunk.js 5.5M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-2d33e4.42bb0640.chunk.js.map 5.0M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Hosts: ioBroker ioBroker (version: 7.0.3, hostname: ioBroker , alive, uptime: 8423) iobroker-slave iobroker-slave (version: 7.0.3, hostname: iobroker-slave, alive, uptime: 2164) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker - enabled + system.adapter.backitup.0 : backitup : ioBroker - enabled + system.adapter.backitup.1 : backitup : iobroker-slave - enabled system.adapter.cameras.0 : cameras : ioBroker - disabled, port: 8200, bind: 127.0.0.1 system.adapter.daswetter.0 : daswetter : ioBroker - enabled system.adapter.device-reminder.0 : device-reminder : ioBroker - disabled system.adapter.devices.0 : devices : iobroker-slave - disabled + system.adapter.doorbird.0 : doorbird : ioBroker - enabled system.adapter.dysonairpurifier.0 : dysonairpurifier : ioBroker - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker - enabled + system.adapter.energiefluss.0 : energiefluss : ioBroker - enabled + system.adapter.followthesun.0 : followthesun : ioBroker - enabled + system.adapter.hs100.0 : hs100 : ioBroker - enabled + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 system.adapter.ical.0 : ical : ioBroker - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ioBroker - disabled + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.jablotron.0 : jablotron : ioBroker - enabled + system.adapter.javascript.0 : javascript : ioBroker - enabled system.adapter.mbus.0 : mbus : ioBroker - disabled, port: 3493 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 system.adapter.modbus.0 : modbus : ioBroker - disabled + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.nut.0 : nut : ioBroker - enabled + system.adapter.openknx.0 : openknx : ioBroker - enabled system.adapter.openweathermap.0 : openweathermap : ioBroker - enabled + system.adapter.ping.0 : ping : ioBroker - enabled + system.adapter.pushover.0 : pushover : ioBroker - enabled + system.adapter.pvforecast.0 : pvforecast : ioBroker - enabled + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : ioBroker - enabled + system.adapter.sonos.0 : sonos : ioBroker - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker - enabled + system.adapter.spritmonitor.0 : spritmonitor : ioBroker - enabled + system.adapter.tapo.0 : tapo : ioBroker - enabled + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ioBroker - disabled + system.adapter.tibberlink.0 : tibberlink : ioBroker - enabled + system.adapter.trashschedule.0 : trashschedule : ioBroker - enabled + system.adapter.tuya.0 : tuya : ioBroker - enabled + system.adapter.unifi.0 : unifi : ioBroker - enabled + system.adapter.viessmannapi.0 : viessmannapi : ioBroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : ioBroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker - disabled system.adapter.vis-metro.0 : vis-metro : ioBroker - disabled system.adapter.vis-players.0 : vis-players : ioBroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker - disabled system.adapter.vis.0 : vis : ioBroker - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker - enabled + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-slave - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-slave - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌──────────────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ name │ url │ auto upgrade │ ├──────────────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ │ 2 │ 'List' │ 'http://download.iobroker.net/list.html' │ false │ └──────────────────────────────────────────────────────────────────────────────────────────────────────── Active repo(s): Stable (default) Upgrade policy: patch Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "devices" : 1.1.5 , installed 1.1.5 Controller "js-controller": 7.0.3 , installed 7.0.3 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 26984 States: 23316 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Done Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 22889 5560/node-red tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 619 446/sshd: /usr/sbin tcp 0 0 0.0.0.0:20000 0.0.0.0:* LISTEN 1001 24006 5560/node-red tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1001 24003 5560/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 572 366/avahi-daemon: r udp 0 0 0.0.0.0:51505 0.0.0.0:* 104 5517 366/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24009 5560/node-red udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24008 5560/node-red *** Log File - Last 25 Lines *** 2024-12-09 12:57:30.441 - info: host.iobroker-slave iobroker host.iobroker-slave object node-red.0.info.connection created 2024-12-09 12:57:30.451 - info: host.iobroker-slave iobroker host.iobroker-slave Set default value of node-red.0.info.connection: false 2024-12-09 12:57:30.474 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0 created 2024-12-09 12:57:31.633 - info: host.iobroker-slave iobroker exit 0 2024-12-09 12:57:35.950 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 5493 2024-12-09 12:57:42.066 - info: node-red.0 (5493) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 12:57:42.172 - info: node-red.0 (5493) Requested NPM packages: [] 2024-12-09 12:57:42.278 - warn: node-red.0 (5493) Cannot enable the dynamic object read as admin has authentication 2024-12-09 12:57:48.618 - info: node-red.0 (5493) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js 2024-12-09 12:57:48.634 - info: node-red.0 (5493) Node-RED started successfully (PID: 5525) 2024-12-09 12:58:03.330 - warn: node-red.0 (5493) Node-RED: 9 Dec 12:58:03 - [warn] Projects disabled : editorTheme.projects.enabled=false 2024-12-09 12:58:03.399 - warn: node-red.0 (5493) Node-RED: 9 Dec 12:58:03 - [warn] Encrypted credentials not found 2024-12-09 12:59:11.011 - info: host.iobroker-slave stopInstance system.adapter.node-red.0 (force=false, process=true) 2024-12-09 12:59:11.018 - info: node-red.0 (5493) kill node-red task 2024-12-09 12:59:11.075 - info: node-red.0 (5493) Node-RED exited with 0 2024-12-09 12:59:16.015 - info: host.iobroker-slave stopInstance timeout 5000 system.adapter.node-red.0 killing pid 5493 2024-12-09 12:59:16.436 - warn: host.iobroker-slave instance system.adapter.node-red.0 terminated due to SIGKILL 2024-12-09 12:59:16.437 - info: host.iobroker-slave instance system.adapter.node-red.0 terminated with code null () 2024-12-09 12:59:21.824 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 5541 2024-12-09 12:59:26.410 - info: node-red.0 (5541) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 12:59:26.627 - warn: node-red.0 (5541) Cannot enable the dynamic object read as admin has authentication 2024-12-09 12:59:32.831 - info: node-red.0 (5541) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js 2024-12-09 12:59:32.847 - info: node-red.0 (5541) Node-RED started successfully (PID: 5560) 2024-12-09 12:59:43.856 - warn: node-red.0 (5541) Node-RED: 9 Dec 12:59:43 - [warn] Projects disabled : editorTheme.projects.enabled=false 2024-12-09 12:59:43.880 - warn: node-red.0 (5541) Node-RED: 9 Dec 12:59:43 - [warn] Encrypted credentials not found ============ Mark until here for C&P ============= iob diag has finished.Copy text starting here: bash ======================= SUMMARY ======================= v.2024-12-08 Raspbian+zigbee diag+masking Static hostname: iobroker-slave Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 Recommended versions are nodejs and npm nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 951M 388M 108M 28K 521M 562M Swap: 536M 135M 401M Total: 1.5G 524M 510M Active iob-Instances: 41 Upgrade policy: patch ioBroker Core: js-controller 7.0.3 admin 7.1.5 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 26984 States: 23316 Size of iob-Database: 5.0M /opt/iobroker/iobroker-data/objects.jsonl 504K /opt/iobroker/iobroker-data/states.jsonl Operating System is the current Debian stable version codenamed 'bookworm'! =================== END OF SUMMARY ==================== === Mark text until here for copying ===tim@iobroker-slave:~ $ apt policy udev udev: Installed: 252.31-1~deb12u1 Candidate: 252.31-1~deb12u1 Version table: *** 252.31-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 100 /var/lib/dpkg/status -
@thomas-braun sagte in Fehler bei node red auf dem slave:
@hant0r sagte in Fehler bei node red auf dem slave:
und ich kein "ttyUSB" bekomme.
Man verwendet ja auch die 'by-id'-Links und nicht direkt die Gerätedateien.
Den richtigen Link und die Einstellungen auf dem Coordinator finden sich in der Test-Version voniob diag --unhide.
Siehe hier:hmm, also einen Pfad mit serial bzw. by-id gibt es nicht..
tim@iobroker-slave:/opt/iobroker $ ls /dev/ Display all 156 possibilities? (y or n) autofs loop1 ram14 tty15 tty36 tty57 vcsa block/ loop2 ram15 tty16 tty37 tty58 vcsa1 bus/ loop3 ram2 tty17 tty38 tty59 vcsa2 cachefiles loop4 ram3 tty18 tty39 tty6 vcsa3 char/ loop5 ram4 tty19 tty4 tty60 vcsa4 console loop6 ram5 tty2 tty40 tty61 vcsa5 cpu_dma_latency loop7 ram6 tty20 tty41 tty62 vcsa6 disk/ loop-control ram7 tty21 tty42 tty63 vcsu dma_heap/ mem ram8 tty22 tty43 tty7 vcsu1 fb0 mmcblk0 ram9 tty23 tty44 tty8 vcsu2 fd/ mmcblk0p1 random tty24 tty45 tty9 vcsu3 full mmcblk0p2 shm/ tty25 tty46 ttyprintk vcsu4 gpiochip0 mqueue/ stderr tty26 tty47 urandom vcsu5 gpiochip1 null stdin tty27 tty48 vchiq vcsu6 gpiochip2 port stdout tty28 tty49 vcio vga_arbiter gpiochip4 ptmx tty tty29 tty5 vc-mem watchdog hwrng pts/ tty0 tty3 tty50 vcs watchdog0 initctl ram0 tty1 tty30 tty51 vcs1 zero input/ ram1 tty10 tty31 tty52 vcs2 kmsg ram10 tty11 tty32 tty53 vcs3 kvm ram11 tty12 tty33 tty54 vcs4 log ram12 tty13 tty34 tty55 vcs5 loop0 ram13 tty14 tty35 tty56 vcs6Im Diag steht auch:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id'mit
lsusbkommt aber:tim@iobroker-slave:/opt/iobroker $ lsusb Bus 001 Device 008: ID 10c4:ea60 Silicon Labs CP210x UART Bridge Bus 001 Device 003: ID 0424:ec00 Microchip Technology, Inc. (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Microchip Technology, Inc. (formerly SMSC) SMC9514 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub========== Start marking the full check here =========== ```bash Script v.2024-12-08 Raspbian+zigbee diag+masking *** BASE SYSTEM *** Static hostname: iobroker-slave Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 3 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:29:32 up 3:02, 1 user, load average: 1.45, 1.16, 0.87 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2024-12-09 13:29:32 CET Universal time: Mon 2024-12-09 12:29:32 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tim HOME=/home/tim GROUPS=tim adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 951M 492M 178M 36K 348M 458M Swap: 536M 22M 514M Total: 1.5G 515M 692M Active iob-Instances: 41 907 M total memory 469 M used memory 363 M active memory 276 M inactive memory 169 M free memory 28 M buffer memory 304 M swap cache 511 M total swap 21 M used swap 490 M free swap *** top - Table Of Processes *** top - 13:29:33 up 3:02, 1 user, load average: 1.57, 1.19, 0.89 Tasks: 123 total, 2 running, 121 sleeping, 0 stopped, 0 zombie %Cpu(s): 37.5 us, 12.5 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 907.2 total, 168.2 free, 470.8 used, 332.5 buff/cache MiB Swap: 512.0 total, 490.2 free, 21.8 used. 436.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System * systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 318M 0 318M 0% /dev tmpfs tmpfs 91M 860K 90M 1% /run /dev/mmcblk0p2 ext4 15G 4.0G 9.5G 30% / tmpfs tmpfs 454M 0 454M 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/mmcblk0p1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 91M 0 91M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 9 10:27:18 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=782cb9f1-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 9 10:27:22 2024] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none. [Mon Dec 9 10:27:25 2024] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 296M /var/cache 290M /var/cache/apt 177M /var/cache/apt/archives 164M /var/lib Archived and active journals take up 52.0M in the file system. /opt/iobroker/backups: 176K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 137M /opt/iobroker/iobroker-data/ 72M /opt/iobroker/iobroker-data/node-red 71M /opt/iobroker/iobroker-data/node-red/node_modules 60M /opt/iobroker/iobroker-data/files 31M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js The five largest files in iobroker-data are: 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.0c96b194.chunk.js.map 5.6M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-f0ed96.6c33ff1f.chunk.js 5.5M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-2d33e4.42bb0640.chunk.js.map 5.0M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Hosts: ioBroker ioBroker (version: 7.0.3, hostname: ioBroker , alive, uptime: 8423) iobroker-slave iobroker-slave (version: 7.0.3, hostname: iobroker-slave, alive, uptime: 2164) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker - enabled + system.adapter.backitup.0 : backitup : ioBroker - enabled + system.adapter.backitup.1 : backitup : iobroker-slave - enabled system.adapter.cameras.0 : cameras : ioBroker - disabled, port: 8200, bind: 127.0.0.1 system.adapter.daswetter.0 : daswetter : ioBroker - enabled system.adapter.device-reminder.0 : device-reminder : ioBroker - disabled system.adapter.devices.0 : devices : iobroker-slave - disabled + system.adapter.doorbird.0 : doorbird : ioBroker - enabled system.adapter.dysonairpurifier.0 : dysonairpurifier : ioBroker - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker - enabled + system.adapter.energiefluss.0 : energiefluss : ioBroker - enabled + system.adapter.followthesun.0 : followthesun : ioBroker - enabled + system.adapter.hs100.0 : hs100 : ioBroker - enabled + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 system.adapter.ical.0 : ical : ioBroker - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ioBroker - disabled + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.jablotron.0 : jablotron : ioBroker - enabled + system.adapter.javascript.0 : javascript : ioBroker - enabled system.adapter.mbus.0 : mbus : ioBroker - disabled, port: 3493 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 system.adapter.modbus.0 : modbus : ioBroker - disabled + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.nut.0 : nut : ioBroker - enabled + system.adapter.openknx.0 : openknx : ioBroker - enabled system.adapter.openweathermap.0 : openweathermap : ioBroker - enabled + system.adapter.ping.0 : ping : ioBroker - enabled + system.adapter.pushover.0 : pushover : ioBroker - enabled + system.adapter.pvforecast.0 : pvforecast : ioBroker - enabled + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : ioBroker - enabled + system.adapter.sonos.0 : sonos : ioBroker - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker - enabled + system.adapter.spritmonitor.0 : spritmonitor : ioBroker - enabled + system.adapter.tapo.0 : tapo : ioBroker - enabled + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ioBroker - disabled + system.adapter.tibberlink.0 : tibberlink : ioBroker - enabled + system.adapter.trashschedule.0 : trashschedule : ioBroker - enabled + system.adapter.tuya.0 : tuya : ioBroker - enabled + system.adapter.unifi.0 : unifi : ioBroker - enabled + system.adapter.viessmannapi.0 : viessmannapi : ioBroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : ioBroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker - disabled system.adapter.vis-metro.0 : vis-metro : ioBroker - disabled system.adapter.vis-players.0 : vis-players : ioBroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker - disabled system.adapter.vis.0 : vis : ioBroker - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker - enabled + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-slave - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-slave - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌──────────────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ name │ url │ auto upgrade │ ├──────────────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ │ 2 │ 'List' │ 'http://download.iobroker.net/list.html' │ false │ └──────────────────────────────────────────────────────────────────────────────────────────────────────── Active repo(s): Stable (default) Upgrade policy: patch Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "devices" : 1.1.5 , installed 1.1.5 Controller "js-controller": 7.0.3 , installed 7.0.3 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 26984 States: 23316 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Done Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 22889 5560/node-red tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 619 446/sshd: /usr/sbin tcp 0 0 0.0.0.0:20000 0.0.0.0:* LISTEN 1001 24006 5560/node-red tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1001 24003 5560/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 572 366/avahi-daemon: r udp 0 0 0.0.0.0:51505 0.0.0.0:* 104 5517 366/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24009 5560/node-red udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24008 5560/node-red *** Log File - Last 25 Lines *** 2024-12-09 12:57:30.441 - info: host.iobroker-slave iobroker host.iobroker-slave object node-red.0.info.connection created 2024-12-09 12:57:30.451 - info: host.iobroker-slave iobroker host.iobroker-slave Set default value of node-red.0.info.connection: false 2024-12-09 12:57:30.474 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0 created 2024-12-09 12:57:31.633 - info: host.iobroker-slave iobroker exit 0 2024-12-09 12:57:35.950 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 5493 2024-12-09 12:57:42.066 - info: node-red.0 (5493) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 12:57:42.172 - info: node-red.0 (5493) Requested NPM packages: [] 2024-12-09 12:57:42.278 - warn: node-red.0 (5493) Cannot enable the dynamic object read as admin has authentication 2024-12-09 12:57:48.618 - info: node-red.0 (5493) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js 2024-12-09 12:57:48.634 - info: node-red.0 (5493) Node-RED started successfully (PID: 5525) 2024-12-09 12:58:03.330 - warn: node-red.0 (5493) Node-RED: 9 Dec 12:58:03 - [warn] Projects disabled : editorTheme.projects.enabled=false 2024-12-09 12:58:03.399 - warn: node-red.0 (5493) Node-RED: 9 Dec 12:58:03 - [warn] Encrypted credentials not found 2024-12-09 12:59:11.011 - info: host.iobroker-slave stopInstance system.adapter.node-red.0 (force=false, process=true) 2024-12-09 12:59:11.018 - info: node-red.0 (5493) kill node-red task 2024-12-09 12:59:11.075 - info: node-red.0 (5493) Node-RED exited with 0 2024-12-09 12:59:16.015 - info: host.iobroker-slave stopInstance timeout 5000 system.adapter.node-red.0 killing pid 5493 2024-12-09 12:59:16.436 - warn: host.iobroker-slave instance system.adapter.node-red.0 terminated due to SIGKILL 2024-12-09 12:59:16.437 - info: host.iobroker-slave instance system.adapter.node-red.0 terminated with code null () 2024-12-09 12:59:21.824 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 5541 2024-12-09 12:59:26.410 - info: node-red.0 (5541) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 12:59:26.627 - warn: node-red.0 (5541) Cannot enable the dynamic object read as admin has authentication 2024-12-09 12:59:32.831 - info: node-red.0 (5541) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js 2024-12-09 12:59:32.847 - info: node-red.0 (5541) Node-RED started successfully (PID: 5560) 2024-12-09 12:59:43.856 - warn: node-red.0 (5541) Node-RED: 9 Dec 12:59:43 - [warn] Projects disabled : editorTheme.projects.enabled=false 2024-12-09 12:59:43.880 - warn: node-red.0 (5541) Node-RED: 9 Dec 12:59:43 - [warn] Encrypted credentials not found ============ Mark until here for C&P ============= iob diag has finished.Copy text starting here: bash ======================= SUMMARY ======================= v.2024-12-08 Raspbian+zigbee diag+masking Static hostname: iobroker-slave Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 Recommended versions are nodejs and npm nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 951M 388M 108M 28K 521M 562M Swap: 536M 135M 401M Total: 1.5G 524M 510M Active iob-Instances: 41 Upgrade policy: patch ioBroker Core: js-controller 7.0.3 admin 7.1.5 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 26984 States: 23316 Size of iob-Database: 5.0M /opt/iobroker/iobroker-data/objects.jsonl 504K /opt/iobroker/iobroker-data/states.jsonl Operating System is the current Debian stable version codenamed 'bookworm'! =================== END OF SUMMARY ==================== === Mark text until here for copying ===tim@iobroker-slave:~ $ apt policy udev udev: Installed: 252.31-1~deb12u1 Candidate: 252.31-1~deb12u1 Version table: *** 252.31-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 100 /var/lib/dpkg/status@hant0r sagte in Fehler bei node red auf dem slave:
*** FAILED SERVICES ***
Sollten eigentlich keine aufgeführt werden. Bei dir hängen da zwei drin.
Ich hatte auch oben die falsche Option genannt. Das muss
iob diag --unmasklauten, nicht unhide (wollte ich zuerst so nennen, deswegen die Verwechslung).
Zum Stick: Steck den mal für eine Minute ab und dann wieder ein.
-
@hant0r sagte in Fehler bei node red auf dem slave:
*** FAILED SERVICES ***
Sollten eigentlich keine aufgeführt werden. Bei dir hängen da zwei drin.
Ich hatte auch oben die falsche Option genannt. Das muss
iob diag --unmasklauten, nicht unhide (wollte ich zuerst so nennen, deswegen die Verwechslung).
Zum Stick: Steck den mal für eine Minute ab und dann wieder ein.
@thomas-braun sagte in Fehler bei node red auf dem slave:
Zum Stick: Steck den mal für eine Minute ab und dann wieder ein.
Habe ich gemacht.
Keine Änderung. Mal dazwischen rebooten?@thomas-braun sagte in Fehler bei node red auf dem slave:
Sollten eigentlich keine aufgeführt werden. Bei dir hängen da zwei drin.
Hmm, woran kann das liegen? Ist doch ein frisches System?
bash Script v.2024-12-08 Raspbian+zigbee diag+masking *** BASE SYSTEM *** Static hostname: iobroker-slave Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 3 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:19:58 up 29 min, 1 user, load average: 1.75, 1.27, 1.07 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2024-12-09 14:19:59 CET Universal time: Mon 2024-12-09 13:19:59 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tim HOME=/home/tim GROUPS=tim adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 951M 507M 200M 872K 302M 444M Swap: 536M 0B 536M Total: 1.5G 507M 737M Active iob-Instances: 41 907 M total memory 483 M used memory 49 M active memory 598 M inactive memory 191 M free memory 20 M buffer memory 268 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 14:19:59 up 29 min, 1 user, load average: 1.75, 1.27, 1.07 Tasks: 123 total, 2 running, 121 sleeping, 0 stopped, 0 zombie %Cpu(s): 27.3 us, 18.2 sy, 0.0 ni, 45.5 id, 0.0 wa, 0.0 hi, 9.1 si, 0.0 st MiB Mem : 907.2 total, 190.8 free, 484.1 used, 288.8 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 423.1 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System * systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 318M 0 318M 0% /dev tmpfs tmpfs 91M 852K 90M 1% /run /dev/mmcblk0p2 ext4 15G 4.0G 9.4G 30% / tmpfs tmpfs 454M 0 454M 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/mmcblk0p1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 91M 0 91M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 9 13:50:00 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=782cb9f1-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 9 13:50:04 2024] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none. [Mon Dec 9 13:50:07 2024] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 296M /var/cache 290M /var/cache/apt 177M /var/cache/apt/archives 164M /var/lib Archived and active journals take up 60.0M in the file system. /opt/iobroker/backups: 176K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 137M /opt/iobroker/iobroker-data/ 72M /opt/iobroker/iobroker-data/node-red 71M /opt/iobroker/iobroker-data/node-red/node_modules 60M /opt/iobroker/iobroker-data/files 31M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js The five largest files in iobroker-data are: 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.0c96b194.chunk.js.map 5.6M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-f0ed96.6c33ff1f.chunk.js 5.5M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-2d33e4.42bb0640.chunk.js.map 5.0M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.0 Extended Pan ID: addaddaddadd***** Pan ID: 6754 Channel: 11 Network Key: 01030507090b0d0f0002040608****** ": "d21ced88487ab3b19afa98306fdb ": "a94211b3fb87c6358ee3dea8b361 ": "782eeeb5ec2b9848d9e1f5fd0a5e ": "10573f6faa3ef9a6a8709ea0b176 ": "229f52d535e2436939d7b4***** ": "056ccf8b487ab3b14d8aba****** ": "ab4ba260aa3ef9a6136c03****** *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Hosts: ioBroker ioBroker (version: 7.0.3, hostname: ioBroker , alive, uptime: 11454) iobroker-slave iobroker-slave (version: 7.0.3, hostname: iobroker-slave, alive, uptime: 1810) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker - enabled + system.adapter.backitup.0 : backitup : ioBroker - enabled + system.adapter.backitup.1 : backitup : iobroker-slave - enabled system.adapter.cameras.0 : cameras : ioBroker - disabled, port: 8200, bind: 127.0.0.1 system.adapter.daswetter.0 : daswetter : ioBroker - enabled system.adapter.device-reminder.0 : device-reminder : ioBroker - disabled system.adapter.devices.0 : devices : iobroker-slave - disabled + system.adapter.doorbird.0 : doorbird : ioBroker - enabled system.adapter.dysonairpurifier.0 : dysonairpurifier : ioBroker - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker - enabled + system.adapter.energiefluss.0 : energiefluss : ioBroker - enabled + system.adapter.followthesun.0 : followthesun : ioBroker - enabled + system.adapter.hs100.0 : hs100 : ioBroker - enabled + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 system.adapter.ical.0 : ical : ioBroker - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ioBroker - disabled + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.jablotron.0 : jablotron : ioBroker - enabled + system.adapter.javascript.0 : javascript : ioBroker - enabled system.adapter.mbus.0 : mbus : ioBroker - disabled, port: 3493 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 system.adapter.modbus.0 : modbus : ioBroker - disabled + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.nut.0 : nut : ioBroker - enabled + system.adapter.openknx.0 : openknx : ioBroker - enabled system.adapter.openweathermap.0 : openweathermap : ioBroker - enabled + system.adapter.ping.0 : ping : ioBroker - enabled + system.adapter.pushover.0 : pushover : ioBroker - enabled + system.adapter.pvforecast.0 : pvforecast : ioBroker - enabled + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : ioBroker - enabled + system.adapter.sonos.0 : sonos : ioBroker - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker - enabled + system.adapter.spritmonitor.0 : spritmonitor : ioBroker - enabled + system.adapter.tapo.0 : tapo : ioBroker - enabled + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ioBroker - disabled + system.adapter.tibberlink.0 : tibberlink : ioBroker - enabled + system.adapter.trashschedule.0 : trashschedule : ioBroker - enabled + system.adapter.tuya.0 : tuya : ioBroker - enabled + system.adapter.unifi.0 : unifi : ioBroker - enabled + system.adapter.viessmannapi.0 : viessmannapi : ioBroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : ioBroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker - disabled system.adapter.vis-metro.0 : vis-metro : ioBroker - disabled system.adapter.vis-players.0 : vis-players : ioBroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker - disabled system.adapter.vis.0 : vis : ioBroker - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker - enabled + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-slave - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-slave - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌──────────────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ name │ url │ auto upgrade │ ├──────────────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ │ 2 │ 'List' │ 'http://download.iobroker.net/list.html' │ false │ └──────────────────────────────────────────────────────────────────────────────────────────────────────── Active repo(s): Stable (default) Upgrade policy: patch Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "devices" : 1.1.5 , installed 1.1.5 Controller "js-controller": 7.0.3 , installed 7.0.3 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 27003 States: 23335 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 http://deb.debian.org/debian bullseye-backports InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Done Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1001 4950 595/node-red tcp 0 0 0.0.0.0:20000 0.0.0.0:* LISTEN 1001 4953 595/node-red tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 4838 449/sshd: /usr/sbin tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 684 595/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 2902 371/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 4956 595/node-red udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 4955 595/node-red udp 0 0 0.0.0.0:55965 0.0.0.0:* 104 2911 371/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-12-09 13:50:10.070 - info: host.iobroker-slave added notifications configuration of host 2024-12-09 13:50:12.116 - info: host.iobroker-slave 63 instances found 2024-12-09 13:50:12.186 - info: host.iobroker-slave starting 3 instances 2024-12-09 13:50:14.725 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 555 2024-12-09 13:50:18.793 - info: host.iobroker-slave instance system.adapter.backitup.1 in version "3.0.25" started with pid 566 2024-12-09 13:50:20.524 - info: node-red.0 (555) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 13:50:21.036 - warn: node-red.0 (555) Cannot enable the dynamic object read as admin has authentication 2024-12-09 13:50:22.920 - info: host.iobroker-slave instance system.adapter.zigbee.0 in version "1.10.3" started with pid 581 2024-12-09 13:50:42.300 - info: backitup.1 (566) starting. Version 3.0.25 in /opt/iobroker/node_modules/iobroker.backitup, node: v20.18.1, js-controller: 7.0.3 2024-12-09 13:50:45.445 - info: node-red.0 (555) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js 2024-12-09 13:50:45.462 - info: node-red.0 (555) Node-RED started successfully (PID: 595) 2024-12-09 13:50:56.411 - info: zigbee.0 (581) starting. Version 1.10.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.18.1, js-controller: 7.0.3 2024-12-09 13:50:56.616 - info: zigbee.0 (581) Starting Zigbee npm ... 2024-12-09 13:50:58.197 - error: zigbee.0 (581) Starting zigbee-herdsman problem : "Error: No such file or directory, cannot open /dev/ttyUSB0" 2024-12-09 13:50:58.202 - error: zigbee.0 (581) Failed to start Zigbee 2024-12-09 13:50:58.204 - error: zigbee.0 (581) Error herdsman start 2024-12-09 13:50:58.214 - info: zigbee.0 (581) Installed Version: iobroker.zigbee@1.10.3 2024-12-09 13:51:08.213 - info: zigbee.0 (581) Try to reconnect. 1 attempts left 2024-12-09 13:51:08.215 - info: zigbee.0 (581) Starting Zigbee npm ... 2024-12-09 13:51:08.243 - info: zigbee.0 (581) Installed Version: iobroker.zigbee@1.10.3 2024-12-09 13:51:08.258 - error: zigbee.0 (581) Starting zigbee-herdsman problem : "Error: No such file or directory, cannot open /dev/ttyUSB0" 2024-12-09 13:51:08.260 - error: zigbee.0 (581) Failed to start Zigbee 2024-12-09 13:51:08.261 - error: zigbee.0 (581) Error herdsman start 2024-12-09 13:51:11.397 - warn: node-red.0 (555) Node-RED: 9 Dec 13:51:11 - [warn] Projects disabled : editorTheme.projects.enabled=false 2024-12-09 13:51:11.540 - warn: node-red.0 (555) Node-RED: 9 Dec 13:51:11 - [warn] Encrypted credentials not found ============ Mark until here for C&P ============= iob diag has finished. -
@thomas-braun sagte in Fehler bei node red auf dem slave:
Zum Stick: Steck den mal für eine Minute ab und dann wieder ein.
Habe ich gemacht.
Keine Änderung. Mal dazwischen rebooten?@thomas-braun sagte in Fehler bei node red auf dem slave:
Sollten eigentlich keine aufgeführt werden. Bei dir hängen da zwei drin.
Hmm, woran kann das liegen? Ist doch ein frisches System?
bash Script v.2024-12-08 Raspbian+zigbee diag+masking *** BASE SYSTEM *** Static hostname: iobroker-slave Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 3 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:19:58 up 29 min, 1 user, load average: 1.75, 1.27, 1.07 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2024-12-09 14:19:59 CET Universal time: Mon 2024-12-09 13:19:59 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tim HOME=/home/tim GROUPS=tim adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 951M 507M 200M 872K 302M 444M Swap: 536M 0B 536M Total: 1.5G 507M 737M Active iob-Instances: 41 907 M total memory 483 M used memory 49 M active memory 598 M inactive memory 191 M free memory 20 M buffer memory 268 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 14:19:59 up 29 min, 1 user, load average: 1.75, 1.27, 1.07 Tasks: 123 total, 2 running, 121 sleeping, 0 stopped, 0 zombie %Cpu(s): 27.3 us, 18.2 sy, 0.0 ni, 45.5 id, 0.0 wa, 0.0 hi, 9.1 si, 0.0 st MiB Mem : 907.2 total, 190.8 free, 484.1 used, 288.8 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 423.1 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System * systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 318M 0 318M 0% /dev tmpfs tmpfs 91M 852K 90M 1% /run /dev/mmcblk0p2 ext4 15G 4.0G 9.4G 30% / tmpfs tmpfs 454M 0 454M 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/mmcblk0p1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 91M 0 91M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 9 13:50:00 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=782cb9f1-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 9 13:50:04 2024] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none. [Mon Dec 9 13:50:07 2024] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 296M /var/cache 290M /var/cache/apt 177M /var/cache/apt/archives 164M /var/lib Archived and active journals take up 60.0M in the file system. /opt/iobroker/backups: 176K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 137M /opt/iobroker/iobroker-data/ 72M /opt/iobroker/iobroker-data/node-red 71M /opt/iobroker/iobroker-data/node-red/node_modules 60M /opt/iobroker/iobroker-data/files 31M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js The five largest files in iobroker-data are: 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.0c96b194.chunk.js.map 5.6M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-f0ed96.6c33ff1f.chunk.js 5.5M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-2d33e4.42bb0640.chunk.js.map 5.0M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.0 Extended Pan ID: addaddaddadd***** Pan ID: 6754 Channel: 11 Network Key: 01030507090b0d0f0002040608****** ": "d21ced88487ab3b19afa98306fdb ": "a94211b3fb87c6358ee3dea8b361 ": "782eeeb5ec2b9848d9e1f5fd0a5e ": "10573f6faa3ef9a6a8709ea0b176 ": "229f52d535e2436939d7b4***** ": "056ccf8b487ab3b14d8aba****** ": "ab4ba260aa3ef9a6136c03****** *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Hosts: ioBroker ioBroker (version: 7.0.3, hostname: ioBroker , alive, uptime: 11454) iobroker-slave iobroker-slave (version: 7.0.3, hostname: iobroker-slave, alive, uptime: 1810) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker - enabled + system.adapter.backitup.0 : backitup : ioBroker - enabled + system.adapter.backitup.1 : backitup : iobroker-slave - enabled system.adapter.cameras.0 : cameras : ioBroker - disabled, port: 8200, bind: 127.0.0.1 system.adapter.daswetter.0 : daswetter : ioBroker - enabled system.adapter.device-reminder.0 : device-reminder : ioBroker - disabled system.adapter.devices.0 : devices : iobroker-slave - disabled + system.adapter.doorbird.0 : doorbird : ioBroker - enabled system.adapter.dysonairpurifier.0 : dysonairpurifier : ioBroker - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker - enabled + system.adapter.energiefluss.0 : energiefluss : ioBroker - enabled + system.adapter.followthesun.0 : followthesun : ioBroker - enabled + system.adapter.hs100.0 : hs100 : ioBroker - enabled + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 system.adapter.ical.0 : ical : ioBroker - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ioBroker - disabled + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.jablotron.0 : jablotron : ioBroker - enabled + system.adapter.javascript.0 : javascript : ioBroker - enabled system.adapter.mbus.0 : mbus : ioBroker - disabled, port: 3493 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 system.adapter.modbus.0 : modbus : ioBroker - disabled + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.nut.0 : nut : ioBroker - enabled + system.adapter.openknx.0 : openknx : ioBroker - enabled system.adapter.openweathermap.0 : openweathermap : ioBroker - enabled + system.adapter.ping.0 : ping : ioBroker - enabled + system.adapter.pushover.0 : pushover : ioBroker - enabled + system.adapter.pvforecast.0 : pvforecast : ioBroker - enabled + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : ioBroker - enabled + system.adapter.sonos.0 : sonos : ioBroker - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker - enabled + system.adapter.spritmonitor.0 : spritmonitor : ioBroker - enabled + system.adapter.tapo.0 : tapo : ioBroker - enabled + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ioBroker - disabled + system.adapter.tibberlink.0 : tibberlink : ioBroker - enabled + system.adapter.trashschedule.0 : trashschedule : ioBroker - enabled + system.adapter.tuya.0 : tuya : ioBroker - enabled + system.adapter.unifi.0 : unifi : ioBroker - enabled + system.adapter.viessmannapi.0 : viessmannapi : ioBroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : ioBroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker - disabled system.adapter.vis-metro.0 : vis-metro : ioBroker - disabled system.adapter.vis-players.0 : vis-players : ioBroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker - disabled system.adapter.vis.0 : vis : ioBroker - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker - enabled + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-slave - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-slave - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌──────────────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ name │ url │ auto upgrade │ ├──────────────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ │ 2 │ 'List' │ 'http://download.iobroker.net/list.html' │ false │ └──────────────────────────────────────────────────────────────────────────────────────────────────────── Active repo(s): Stable (default) Upgrade policy: patch Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "devices" : 1.1.5 , installed 1.1.5 Controller "js-controller": 7.0.3 , installed 7.0.3 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 27003 States: 23335 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 http://deb.debian.org/debian bullseye-backports InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Done Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1001 4950 595/node-red tcp 0 0 0.0.0.0:20000 0.0.0.0:* LISTEN 1001 4953 595/node-red tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 4838 449/sshd: /usr/sbin tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 684 595/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 2902 371/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 4956 595/node-red udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 4955 595/node-red udp 0 0 0.0.0.0:55965 0.0.0.0:* 104 2911 371/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-12-09 13:50:10.070 - info: host.iobroker-slave added notifications configuration of host 2024-12-09 13:50:12.116 - info: host.iobroker-slave 63 instances found 2024-12-09 13:50:12.186 - info: host.iobroker-slave starting 3 instances 2024-12-09 13:50:14.725 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 555 2024-12-09 13:50:18.793 - info: host.iobroker-slave instance system.adapter.backitup.1 in version "3.0.25" started with pid 566 2024-12-09 13:50:20.524 - info: node-red.0 (555) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 13:50:21.036 - warn: node-red.0 (555) Cannot enable the dynamic object read as admin has authentication 2024-12-09 13:50:22.920 - info: host.iobroker-slave instance system.adapter.zigbee.0 in version "1.10.3" started with pid 581 2024-12-09 13:50:42.300 - info: backitup.1 (566) starting. Version 3.0.25 in /opt/iobroker/node_modules/iobroker.backitup, node: v20.18.1, js-controller: 7.0.3 2024-12-09 13:50:45.445 - info: node-red.0 (555) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js 2024-12-09 13:50:45.462 - info: node-red.0 (555) Node-RED started successfully (PID: 595) 2024-12-09 13:50:56.411 - info: zigbee.0 (581) starting. Version 1.10.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.18.1, js-controller: 7.0.3 2024-12-09 13:50:56.616 - info: zigbee.0 (581) Starting Zigbee npm ... 2024-12-09 13:50:58.197 - error: zigbee.0 (581) Starting zigbee-herdsman problem : "Error: No such file or directory, cannot open /dev/ttyUSB0" 2024-12-09 13:50:58.202 - error: zigbee.0 (581) Failed to start Zigbee 2024-12-09 13:50:58.204 - error: zigbee.0 (581) Error herdsman start 2024-12-09 13:50:58.214 - info: zigbee.0 (581) Installed Version: iobroker.zigbee@1.10.3 2024-12-09 13:51:08.213 - info: zigbee.0 (581) Try to reconnect. 1 attempts left 2024-12-09 13:51:08.215 - info: zigbee.0 (581) Starting Zigbee npm ... 2024-12-09 13:51:08.243 - info: zigbee.0 (581) Installed Version: iobroker.zigbee@1.10.3 2024-12-09 13:51:08.258 - error: zigbee.0 (581) Starting zigbee-herdsman problem : "Error: No such file or directory, cannot open /dev/ttyUSB0" 2024-12-09 13:51:08.260 - error: zigbee.0 (581) Failed to start Zigbee 2024-12-09 13:51:08.261 - error: zigbee.0 (581) Error herdsman start 2024-12-09 13:51:11.397 - warn: node-red.0 (555) Node-RED: 9 Dec 13:51:11 - [warn] Projects disabled : editorTheme.projects.enabled=false 2024-12-09 13:51:11.540 - warn: node-red.0 (555) Node-RED: 9 Dec 13:51:11 - [warn] Encrypted credentials not found ============ Mark until here for C&P ============= iob diag has finished.@hant0r sagte in Fehler bei node red auf dem slave:
Mal dazwischen rebooten?
Ja.
Jedenfalls findet das System die Hardware nicht und es wird der Treiber nicht geladen. Ob das mit dem unwilligen Service in Zusammenhang steht weiß ich so ad hoc aber auch nicht. -
Habe das System nun nochmal neu aufgesetzt und den USB Dogle erstmal nicht angeschlossen.
beim
sudo apt update && sudo apt full-upgradekommen aber schon einige Fehler. Ist das normal?... ... Reading changelogs... Done Preconfiguring packages ... dpkg: warning: files list file for package 'libctf0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-pkg-resources' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'pinentry-curses' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'linux-headers-rpi-v8' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdw1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libxdmcp6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libxcb1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libhogweed6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'apt-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'linux-base' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'nftables' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libavif15:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'psmisc' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libalgorithm-diff-perl' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'liblz4-1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'htop' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'fontconfig-config' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'iproute2' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-pycryptodome' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'pigpiod' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libc-bin' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'ncurses-bin' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'firmware-atheros' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'cifs-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libavahi-common3:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'firmware-misc-nonfree' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdeflate0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'gettext-base' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libqmi-glib5:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libidn2-0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libossp-uuid16:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsvtav1enc1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'vim-tiny' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfdt1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'man-db' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'usbutils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'linux-image-6.6.51+rpt-rpi-v8' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpcre2-16-0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsystemd0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpugixml1v5:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'liblgpio1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libv4l-0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-six' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'wpasupplicant' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libselinux1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'alsa-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpigpiod-if1' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcamera-ipa:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libglib2.0-data' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libkms++0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfreetype6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-certifi' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libx11-data' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'librtmp1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libapt-pkg6.0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdbus-1-3:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-requests' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'raspi-firmware' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'liblttng-ust-ctl5:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmnl0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-idna' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'patch' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpigpio-dev' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsepol2:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgav1-1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-rpi-lgpio' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'linux-image-rpi-v8' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libncursesw6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfuse3-3:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-toml' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdpkg-perl' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'logsave' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-urllib3' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libwebp7:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'ppp' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'g++' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'keyutils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'groff-base' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmatroska7:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcrypt-dev:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libnsl2:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'gpiod' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libtasn1-6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libc6-dev:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libx11-6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmtp9:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'sgml-base' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpisp1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'usb-modeswitch' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libusb-1.0-0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfontconfig1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'apt-listchanges' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libndp0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmbim-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libisl23:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libbz2-1.0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsamplerate0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libbsd0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'raspi-config' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python-is-python3' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libyuv0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libqmi-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libalgorithm-diff-xs-perl:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libjson-c5:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'readline-common' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'publicsuffix' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-smbus2' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'dbus-bin' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'raspi-utils-core' missing; assuming package has no files currently installed (Reading database ... 48569 files and directories currently installed.) Preparing to unpack .../00-raspi-firmware_1%3a1.20241126-1_all.deb ... ... ... ... /usr/sbin/update-initramfs: 1: /etc/initramfs-tools/update-initramfs.conf: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒: File name too long dpkg: error processing package initramfs-tools (--configure): installed initramfs-tools package post-installation script subprocess returned error exit status 127 dpkg: dependency problems prevent configuration of linux-image-6.6.62+rpt-rpi-2712: linux-image-6.6.62+rpt-rpi-2712 depends on initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool; however: Package initramfs-tools is not configured yet. Package linux-initramfs-tool is not installed. Package initramfs-tools which provides linux-initramfs-tool is not configured yet. dpkg: error processing package linux-image-6.6.62+rpt-rpi-2712 (--configure): dependency problems - leaving unconfigured Setting up raspberrypi-sys-mods (20241202) ... dpkg: dependency problems prevent configuration of linux-image-rpi-2712: linux-image-rpi-2712 depends on linux-image-6.6.62+rpt-rpi-2712 (= 1:6.6.62-1+rpt1); however: Package linux-image-6.6.62+rpt-rpi-2712 is not configured yet. dpkg: error processing package linux-image-rpi-2712 (--configure): dependency problems - leaving unconfigured Setting up raspberrypi-net-mods (1.4.3) ... Installing new version of config file /etc/profile.d/wifi-check.sh ... dpkg: dependency problems prevent configuration of linux-image-6.6.62+rpt-rpi-v8: linux-image-6.6.62+rpt-rpi-v8 depends on initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool; however: Package initramfs-tools is not configured yet. Package linux-initramfs-tool is not installed. Package initramfs-tools which provides linux-initramfs-tool is not configured yet. dpkg: error processing package linux-image-6.6.62+rpt-rpi-v8 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-headers-6.6.62+rpt-rpi-v8: linux-headers-6.6.62+rpt-rpi-v8 depends on linux-image-6.6.62+rpt-rpi-v8 (= 1:6.6.62-1+rpt1) | linux-image-6.6.62+rpt-rpi-v8-unsigned (= 1:6.6.62-1+rpt1); however: Package linux-image-6.6.62+rpt-rpi-v8 is not configured yet. Package linux-image-6.6.62+rpt-rpi-v8-unsigned is not installed. dpkg: error processing package linux-headers-6.6.62+rpt-rpi-v8 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-headers-6.6.62+rpt-rpi-2712: linux-headers-6.6.62+rpt-rpi-2712 depends on linux-image-6.6.62+rpt-rpi-2712 (= 1:6.6.62-1+rpt1) | linux-image-6.6.62+rpt-rpi-2712-unsigned (= 1:6.6.62-1+rpt1); however: Package linux-image-6.6.62+rpt-rpi-2712 is not configured yet. Package linux-image-6.6.62+rpt-rpi-2712-unsigned is not installed. dpkg: error processing package linux-headers-6.6.62+rpt-rpi-2712 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-headers-rpi-2712: linux-headers-rpi-2712 depends on linux-headers-6.6.62+rpt-rpi-2712 (= 1:6.6.62-1+rpt1); however: Package linux-headers-6.6.62+rpt-rpi-2712 is not configured yet. dpkg: error processing package linux-headers-rpi-2712 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-image-rpi-v8: linux-image-rpi-v8 depends on linux-image-6.6.62+rpt-rpi-v8 (= 1:6.6.62-1+rpt1); however: Package linux-image-6.6.62+rpt-rpi-v8 is not configured yet. dpkg: error processing package linux-image-rpi-v8 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-headers-rpi-v8: linux-headers-rpi-v8 depends on linux-headers-6.6.62+rpt-rpi-v8 (= 1:6.6.62-1+rpt1); however: Package linux-headers-6.6.62+rpt-rpi-v8 is not configured yet. dpkg: error processing package linux-headers-rpi-v8 (--configure): dependency problems - leaving unconfigured Setting up libcamera0.3:arm64 (0.3.2+rpt20241119-1) ... Setting up libcamera-ipa:arm64 (0.3.2+rpt20241119-1) ... Setting up rpicam-apps-lite (1.5.3-1) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u9) ... Processing triggers for man-db (2.11.2-2) ... Errors were encountered while processing: initramfs-tools linux-image-6.6.62+rpt-rpi-2712 linux-image-rpi-2712 linux-image-6.6.62+rpt-rpi-v8 linux-headers-6.6.62+rpt-rpi-v8 linux-headers-6.6.62+rpt-rpi-2712 linux-headers-rpi-2712 linux-image-rpi-v8 linux-headers-rpi-v8 E: Sub-process /usr/bin/dpkg returned an error code (1)Aber auch nach einer Neuinstallation, ohne das der USB Dongle dran war, bringt die zwei Fehler.
========== Start marking the full check here ===========Script v.2024-12-08 Raspbian+zigbee diag+masking *** BASE SYSTEM *** Static hostname: iobroker-slave Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 3 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 15:38:45 up 9 min, 1 user, load average: 0.29, 0.88, 0.58 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2024-12-09 15:38:46 CET Universal time: Mon 2024-12-09 14:38:46 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tim HOME=/home/tim GROUPS=tim adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 951M 353M 334M 114K 330M 597M Swap: 536M 786K 536M Total: 1.5G 354M 870M Active iob-Instances: 39 907 M total memory 336 M used memory 62 M active memory 423 M inactive memory 319 M free memory 19 M buffer memory 296 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 15:38:46 up 9 min, 1 user, load average: 0.29, 0.88, 0.58 Tasks: 125 total, 1 running, 124 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 12.5 sy, 0.0 ni, 75.0 id, 0.0 wa, 0.0 hi, 12.5 si, 0.0 st MiB Mem : 907.2 total, 318.3 free, 337.9 used, 315.4 buff/cache MiB Swap: 512.0 total, 511.2 free, 0.8 used. 569.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System * systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 318M 0 318M 0% /dev tmpfs tmpfs 91M 844K 90M 1% /run /dev/mmcblk0p2 ext4 15G 4.0G 9.5G 30% / tmpfs tmpfs 454M 0 454M 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/mmcblk0p1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 91M 0 91M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 9 15:29:24 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=3f6ca7d7-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 9 15:29:28 2024] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none. [Mon Dec 9 15:29:31 2024] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 296M /var/cache 290M /var/cache/apt 177M /var/cache/apt/archives 164M /var/lib Archived and active journals take up 71.6M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 137M /opt/iobroker/iobroker-data/ 72M /opt/iobroker/iobroker-data/node-red 71M /opt/iobroker/iobroker-data/node-red/node_modules 60M /opt/iobroker/iobroker-data/files 31M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js The five largest files in iobroker-data are: 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.0c96b194.chunk.js.map 5.6M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-f0ed96.6c33ff1f.chunk.js 5.5M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-2d33e4.42bb0640.chunk.js.map 5.0M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 Zigbee Network Settings on your coordinator/in nvbackup are: *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Hosts: ioBroker ioBroker (version: 7.0.3, hostname: ioBroker , alive, uptime: 16180) iobroker-slave iobroker-slave (version: 7.0.3, hostname: iobroker-slave, alive, uptime: 565) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker - enabled + system.adapter.backitup.0 : backitup : ioBroker - enabled system.adapter.cameras.0 : cameras : ioBroker - disabled, port: 8200, bind: 127.0.0.1 system.adapter.daswetter.0 : daswetter : ioBroker - enabled system.adapter.device-reminder.0 : device-reminder : ioBroker - disabled + system.adapter.doorbird.0 : doorbird : ioBroker - enabled system.adapter.dysonairpurifier.0 : dysonairpurifier : ioBroker - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker - enabled + system.adapter.energiefluss.0 : energiefluss : ioBroker - enabled + system.adapter.followthesun.0 : followthesun : ioBroker - enabled + system.adapter.hs100.0 : hs100 : ioBroker - enabled + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 system.adapter.ical.0 : ical : ioBroker - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ioBroker - disabled + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.jablotron.0 : jablotron : ioBroker - enabled + system.adapter.javascript.0 : javascript : ioBroker - enabled system.adapter.mbus.0 : mbus : ioBroker - disabled, port: 3493 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 system.adapter.modbus.0 : modbus : ioBroker - disabled + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.nut.0 : nut : ioBroker - enabled + system.adapter.openknx.0 : openknx : ioBroker - enabled system.adapter.openweathermap.0 : openweathermap : ioBroker - enabled + system.adapter.ping.0 : ping : ioBroker - enabled + system.adapter.pushover.0 : pushover : ioBroker - enabled + system.adapter.pvforecast.0 : pvforecast : ioBroker - enabled + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : ioBroker - enabled + system.adapter.sonos.0 : sonos : ioBroker - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker - enabled + system.adapter.spritmonitor.0 : spritmonitor : ioBroker - enabled + system.adapter.tapo.0 : tapo : ioBroker - enabled + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ioBroker - disabled + system.adapter.tibberlink.0 : tibberlink : ioBroker - enabled + system.adapter.trashschedule.0 : trashschedule : ioBroker - enabled + system.adapter.tuya.0 : tuya : ioBroker - enabled + system.adapter.unifi.0 : unifi : ioBroker - enabled + system.adapter.viessmannapi.0 : viessmannapi : ioBroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : ioBroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker - disabled system.adapter.vis-metro.0 : vis-metro : ioBroker - disabled system.adapter.vis-players.0 : vis-players : ioBroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker - disabled system.adapter.vis.0 : vis : ioBroker - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker - enabled + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : iobroker-slave - disabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌──────────────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ name │ url │ auto upgrade │ ├──────────────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ │ 2 │ 'List' │ 'http://download.iobroker.net/list.html' │ false │ └──────────────────────────────────────────────────────────────────────────────────────────────────────── Active repo(s): Stable (default) Upgrade policy: patch Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Controller "js-controller": 7.0.3 , installed 7.0.3 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 26969 States: 23298 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Done Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 6341 779/node-red tcp 0 0 0.0.0.0:20000 0.0.0.0:* LISTEN 1001 5595 779/node-red tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3786 445/sshd: /usr/sbin tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1001 5592 779/node-red udp 0 0 0.0.0.0:35171 0.0.0.0:* 104 3741 366/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 5597 779/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 3739 366/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-12-09 15:32:27.711 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0.outputCount created 2024-12-09 15:32:27.727 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0.eventLoopLag created 2024-12-09 15:32:27.740 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0.sigKill created 2024-12-09 15:32:27.752 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0.logLevel created 2024-12-09 15:32:27.767 - info: host.iobroker-slave iobroker host.iobroker-slave object node-red.0.info created 2024-12-09 15:32:27.776 - info: host.iobroker-slave iobroker host.iobroker-slave object node-red.0.info.connection created 2024-12-09 15:32:27.786 - info: host.iobroker-slave iobroker host.iobroker-slave Set default value of node-red.0.info.connection: false 2024-12-09 15:32:27.810 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0 created 2024-12-09 15:32:28.855 - info: host.iobroker-slave iobroker exit 0 2024-12-09 15:32:34.581 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 726 2024-12-09 15:32:39.536 - info: node-red.0 (726) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 15:32:39.649 - info: node-red.0 (726) Requested NPM packages: [] 2024-12-09 15:32:39.763 - warn: node-red.0 (726) Cannot enable the dynamic object read as admin has authentication 2024-12-09 15:32:40.765 - info: host.iobroker-slave stopInstance system.adapter.node-red.0 (force=false, process=true) 2024-12-09 15:32:45.769 - info: host.iobroker-slave stopInstance timeout 5000 system.adapter.node-red.0 killing pid 726 2024-12-09 15:32:46.128 - warn: host.iobroker-slave instance system.adapter.node-red.0 terminated due to SIGKILL 2024-12-09 15:32:46.129 - info: host.iobroker-slave instance system.adapter.node-red.0 terminated with code null () 2024-12-09 15:32:51.199 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 741 2024-12-09 15:32:55.618 - info: node-red.0 (741) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 15:32:55.831 - warn: node-red.0 (741) Cannot enable the dynamic object read as admin has authentication 2024-12-09 15:33:02.041 - info: node-red.0 (741) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js 2024-12-09 15:33:02.059 - info: node-red.0 (741) Node-RED started successfully (PID: 779) 2024-12-09 15:33:16.464 - warn: node-red.0 (741) Node-RED: 9 Dec 15:33:16 - [info] User directory : /opt/iobroker/iobroker-data/node-red/ 9 Dec 15:33:16 - [warn] Projects disabled : editorTheme.projects.enabled=false 2024-12-09 15:33:16.571 - warn: node-red.0 (741) Node-RED: 9 Dec 15:33:16 - [warn] Encrypted credentials not found============ Mark until here for C&P =============
iob diag has finished.
-
Habe das System nun nochmal neu aufgesetzt und den USB Dogle erstmal nicht angeschlossen.
beim
sudo apt update && sudo apt full-upgradekommen aber schon einige Fehler. Ist das normal?... ... Reading changelogs... Done Preconfiguring packages ... dpkg: warning: files list file for package 'libctf0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-pkg-resources' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'pinentry-curses' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'linux-headers-rpi-v8' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdw1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libxdmcp6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libxcb1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libhogweed6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'apt-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'linux-base' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'nftables' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libavif15:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'psmisc' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libalgorithm-diff-perl' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'liblz4-1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'htop' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'fontconfig-config' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'iproute2' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-pycryptodome' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'pigpiod' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libc-bin' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'ncurses-bin' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'firmware-atheros' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'cifs-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libavahi-common3:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'firmware-misc-nonfree' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdeflate0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'gettext-base' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libqmi-glib5:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libidn2-0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libossp-uuid16:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsvtav1enc1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'vim-tiny' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfdt1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'man-db' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'usbutils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'linux-image-6.6.51+rpt-rpi-v8' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpcre2-16-0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsystemd0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpugixml1v5:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'liblgpio1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libv4l-0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-six' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'wpasupplicant' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libselinux1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'alsa-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpigpiod-if1' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcamera-ipa:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libglib2.0-data' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libkms++0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfreetype6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-certifi' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libx11-data' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'librtmp1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libapt-pkg6.0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdbus-1-3:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-requests' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'raspi-firmware' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'liblttng-ust-ctl5:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmnl0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-idna' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'patch' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpigpio-dev' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsepol2:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libgav1-1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-rpi-lgpio' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'linux-image-rpi-v8' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libncursesw6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfuse3-3:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-toml' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libdpkg-perl' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'logsave' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-urllib3' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libwebp7:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'ppp' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'g++' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'keyutils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'groff-base' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmatroska7:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libcrypt-dev:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libnsl2:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'gpiod' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libtasn1-6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libc6-dev:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libx11-6:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmtp9:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'sgml-base' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libpisp1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'usb-modeswitch' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libusb-1.0-0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libfontconfig1:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'apt-listchanges' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libndp0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libmbim-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libisl23:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libbz2-1.0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libsamplerate0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libbsd0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'raspi-config' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python-is-python3' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libyuv0:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libqmi-utils' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libalgorithm-diff-xs-perl:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'libjson-c5:arm64' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'readline-common' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'publicsuffix' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'python3-smbus2' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'dbus-bin' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'raspi-utils-core' missing; assuming package has no files currently installed (Reading database ... 48569 files and directories currently installed.) Preparing to unpack .../00-raspi-firmware_1%3a1.20241126-1_all.deb ... ... ... ... /usr/sbin/update-initramfs: 1: /etc/initramfs-tools/update-initramfs.conf: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒: File name too long dpkg: error processing package initramfs-tools (--configure): installed initramfs-tools package post-installation script subprocess returned error exit status 127 dpkg: dependency problems prevent configuration of linux-image-6.6.62+rpt-rpi-2712: linux-image-6.6.62+rpt-rpi-2712 depends on initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool; however: Package initramfs-tools is not configured yet. Package linux-initramfs-tool is not installed. Package initramfs-tools which provides linux-initramfs-tool is not configured yet. dpkg: error processing package linux-image-6.6.62+rpt-rpi-2712 (--configure): dependency problems - leaving unconfigured Setting up raspberrypi-sys-mods (20241202) ... dpkg: dependency problems prevent configuration of linux-image-rpi-2712: linux-image-rpi-2712 depends on linux-image-6.6.62+rpt-rpi-2712 (= 1:6.6.62-1+rpt1); however: Package linux-image-6.6.62+rpt-rpi-2712 is not configured yet. dpkg: error processing package linux-image-rpi-2712 (--configure): dependency problems - leaving unconfigured Setting up raspberrypi-net-mods (1.4.3) ... Installing new version of config file /etc/profile.d/wifi-check.sh ... dpkg: dependency problems prevent configuration of linux-image-6.6.62+rpt-rpi-v8: linux-image-6.6.62+rpt-rpi-v8 depends on initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool; however: Package initramfs-tools is not configured yet. Package linux-initramfs-tool is not installed. Package initramfs-tools which provides linux-initramfs-tool is not configured yet. dpkg: error processing package linux-image-6.6.62+rpt-rpi-v8 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-headers-6.6.62+rpt-rpi-v8: linux-headers-6.6.62+rpt-rpi-v8 depends on linux-image-6.6.62+rpt-rpi-v8 (= 1:6.6.62-1+rpt1) | linux-image-6.6.62+rpt-rpi-v8-unsigned (= 1:6.6.62-1+rpt1); however: Package linux-image-6.6.62+rpt-rpi-v8 is not configured yet. Package linux-image-6.6.62+rpt-rpi-v8-unsigned is not installed. dpkg: error processing package linux-headers-6.6.62+rpt-rpi-v8 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-headers-6.6.62+rpt-rpi-2712: linux-headers-6.6.62+rpt-rpi-2712 depends on linux-image-6.6.62+rpt-rpi-2712 (= 1:6.6.62-1+rpt1) | linux-image-6.6.62+rpt-rpi-2712-unsigned (= 1:6.6.62-1+rpt1); however: Package linux-image-6.6.62+rpt-rpi-2712 is not configured yet. Package linux-image-6.6.62+rpt-rpi-2712-unsigned is not installed. dpkg: error processing package linux-headers-6.6.62+rpt-rpi-2712 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-headers-rpi-2712: linux-headers-rpi-2712 depends on linux-headers-6.6.62+rpt-rpi-2712 (= 1:6.6.62-1+rpt1); however: Package linux-headers-6.6.62+rpt-rpi-2712 is not configured yet. dpkg: error processing package linux-headers-rpi-2712 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-image-rpi-v8: linux-image-rpi-v8 depends on linux-image-6.6.62+rpt-rpi-v8 (= 1:6.6.62-1+rpt1); however: Package linux-image-6.6.62+rpt-rpi-v8 is not configured yet. dpkg: error processing package linux-image-rpi-v8 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-headers-rpi-v8: linux-headers-rpi-v8 depends on linux-headers-6.6.62+rpt-rpi-v8 (= 1:6.6.62-1+rpt1); however: Package linux-headers-6.6.62+rpt-rpi-v8 is not configured yet. dpkg: error processing package linux-headers-rpi-v8 (--configure): dependency problems - leaving unconfigured Setting up libcamera0.3:arm64 (0.3.2+rpt20241119-1) ... Setting up libcamera-ipa:arm64 (0.3.2+rpt20241119-1) ... Setting up rpicam-apps-lite (1.5.3-1) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u9) ... Processing triggers for man-db (2.11.2-2) ... Errors were encountered while processing: initramfs-tools linux-image-6.6.62+rpt-rpi-2712 linux-image-rpi-2712 linux-image-6.6.62+rpt-rpi-v8 linux-headers-6.6.62+rpt-rpi-v8 linux-headers-6.6.62+rpt-rpi-2712 linux-headers-rpi-2712 linux-image-rpi-v8 linux-headers-rpi-v8 E: Sub-process /usr/bin/dpkg returned an error code (1)Aber auch nach einer Neuinstallation, ohne das der USB Dongle dran war, bringt die zwei Fehler.
========== Start marking the full check here ===========Script v.2024-12-08 Raspbian+zigbee diag+masking *** BASE SYSTEM *** Static hostname: iobroker-slave Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 3 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 15:38:45 up 9 min, 1 user, load average: 0.29, 0.88, 0.58 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2024-12-09 15:38:46 CET Universal time: Mon 2024-12-09 14:38:46 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tim HOME=/home/tim GROUPS=tim adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 951M 353M 334M 114K 330M 597M Swap: 536M 786K 536M Total: 1.5G 354M 870M Active iob-Instances: 39 907 M total memory 336 M used memory 62 M active memory 423 M inactive memory 319 M free memory 19 M buffer memory 296 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 15:38:46 up 9 min, 1 user, load average: 0.29, 0.88, 0.58 Tasks: 125 total, 1 running, 124 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 12.5 sy, 0.0 ni, 75.0 id, 0.0 wa, 0.0 hi, 12.5 si, 0.0 st MiB Mem : 907.2 total, 318.3 free, 337.9 used, 315.4 buff/cache MiB Swap: 512.0 total, 511.2 free, 0.8 used. 569.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System * systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 318M 0 318M 0% /dev tmpfs tmpfs 91M 844K 90M 1% /run /dev/mmcblk0p2 ext4 15G 4.0G 9.5G 30% / tmpfs tmpfs 454M 0 454M 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/mmcblk0p1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 91M 0 91M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 9 15:29:24 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=3f6ca7d7-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 9 15:29:28 2024] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none. [Mon Dec 9 15:29:31 2024] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 296M /var/cache 290M /var/cache/apt 177M /var/cache/apt/archives 164M /var/lib Archived and active journals take up 71.6M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 137M /opt/iobroker/iobroker-data/ 72M /opt/iobroker/iobroker-data/node-red 71M /opt/iobroker/iobroker-data/node-red/node_modules 60M /opt/iobroker/iobroker-data/files 31M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js The five largest files in iobroker-data are: 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 7.0M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.0c96b194.chunk.js.map 5.6M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-f0ed96.6c33ff1f.chunk.js 5.5M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-2d33e4.42bb0640.chunk.js.map 5.0M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 Zigbee Network Settings on your coordinator/in nvbackup are: *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Hosts: ioBroker ioBroker (version: 7.0.3, hostname: ioBroker , alive, uptime: 16180) iobroker-slave iobroker-slave (version: 7.0.3, hostname: iobroker-slave, alive, uptime: 565) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker - enabled + system.adapter.backitup.0 : backitup : ioBroker - enabled system.adapter.cameras.0 : cameras : ioBroker - disabled, port: 8200, bind: 127.0.0.1 system.adapter.daswetter.0 : daswetter : ioBroker - enabled system.adapter.device-reminder.0 : device-reminder : ioBroker - disabled + system.adapter.doorbird.0 : doorbird : ioBroker - enabled system.adapter.dysonairpurifier.0 : dysonairpurifier : ioBroker - disabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker - enabled + system.adapter.energiefluss.0 : energiefluss : ioBroker - enabled + system.adapter.followthesun.0 : followthesun : ioBroker - enabled + system.adapter.hs100.0 : hs100 : ioBroker - enabled + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 system.adapter.ical.0 : ical : ioBroker - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ioBroker - disabled + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.jablotron.0 : jablotron : ioBroker - enabled + system.adapter.javascript.0 : javascript : ioBroker - enabled system.adapter.mbus.0 : mbus : ioBroker - disabled, port: 3493 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 system.adapter.modbus.0 : modbus : ioBroker - disabled + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.nut.0 : nut : ioBroker - enabled + system.adapter.openknx.0 : openknx : ioBroker - enabled system.adapter.openweathermap.0 : openweathermap : ioBroker - enabled + system.adapter.ping.0 : ping : ioBroker - enabled + system.adapter.pushover.0 : pushover : ioBroker - enabled + system.adapter.pvforecast.0 : pvforecast : ioBroker - enabled + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : ioBroker - enabled + system.adapter.sonos.0 : sonos : ioBroker - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker - enabled + system.adapter.spritmonitor.0 : spritmonitor : ioBroker - enabled + system.adapter.tapo.0 : tapo : ioBroker - enabled + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ioBroker - disabled + system.adapter.tibberlink.0 : tibberlink : ioBroker - enabled + system.adapter.trashschedule.0 : trashschedule : ioBroker - enabled + system.adapter.tuya.0 : tuya : ioBroker - enabled + system.adapter.unifi.0 : unifi : ioBroker - enabled + system.adapter.viessmannapi.0 : viessmannapi : ioBroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : ioBroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker - disabled system.adapter.vis-metro.0 : vis-metro : ioBroker - disabled system.adapter.vis-players.0 : vis-players : ioBroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker - disabled system.adapter.vis.0 : vis : ioBroker - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker - enabled + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : iobroker-slave - disabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : ioBroker - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : ioBroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : ioBroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker-slave - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 10.1.1.5 + system.adapter.simple-api.0 : simple-api : ioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : ioBroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌──────────────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ name │ url │ auto upgrade │ ├──────────────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ │ 2 │ 'List' │ 'http://download.iobroker.net/list.html' │ false │ └──────────────────────────────────────────────────────────────────────────────────────────────────────── Active repo(s): Stable (default) Upgrade policy: patch Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Controller "js-controller": 7.0.3 , installed 7.0.3 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 26969 States: 23298 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Done Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 6341 779/node-red tcp 0 0 0.0.0.0:20000 0.0.0.0:* LISTEN 1001 5595 779/node-red tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3786 445/sshd: /usr/sbin tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1001 5592 779/node-red udp 0 0 0.0.0.0:35171 0.0.0.0:* 104 3741 366/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 5597 779/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 3739 366/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-12-09 15:32:27.711 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0.outputCount created 2024-12-09 15:32:27.727 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0.eventLoopLag created 2024-12-09 15:32:27.740 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0.sigKill created 2024-12-09 15:32:27.752 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0.logLevel created 2024-12-09 15:32:27.767 - info: host.iobroker-slave iobroker host.iobroker-slave object node-red.0.info created 2024-12-09 15:32:27.776 - info: host.iobroker-slave iobroker host.iobroker-slave object node-red.0.info.connection created 2024-12-09 15:32:27.786 - info: host.iobroker-slave iobroker host.iobroker-slave Set default value of node-red.0.info.connection: false 2024-12-09 15:32:27.810 - info: host.iobroker-slave iobroker host.iobroker-slave object system.adapter.node-red.0 created 2024-12-09 15:32:28.855 - info: host.iobroker-slave iobroker exit 0 2024-12-09 15:32:34.581 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 726 2024-12-09 15:32:39.536 - info: node-red.0 (726) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 15:32:39.649 - info: node-red.0 (726) Requested NPM packages: [] 2024-12-09 15:32:39.763 - warn: node-red.0 (726) Cannot enable the dynamic object read as admin has authentication 2024-12-09 15:32:40.765 - info: host.iobroker-slave stopInstance system.adapter.node-red.0 (force=false, process=true) 2024-12-09 15:32:45.769 - info: host.iobroker-slave stopInstance timeout 5000 system.adapter.node-red.0 killing pid 726 2024-12-09 15:32:46.128 - warn: host.iobroker-slave instance system.adapter.node-red.0 terminated due to SIGKILL 2024-12-09 15:32:46.129 - info: host.iobroker-slave instance system.adapter.node-red.0 terminated with code null () 2024-12-09 15:32:51.199 - info: host.iobroker-slave instance system.adapter.node-red.0 in version "5.2.1" started with pid 741 2024-12-09 15:32:55.618 - info: node-red.0 (741) starting. Version 5.2.1 in /opt/iobroker/node_modules/iobroker.node-red, node: v20.18.1, js-controller: 7.0.3 2024-12-09 15:32:55.831 - warn: node-red.0 (741) Cannot enable the dynamic object read as admin has authentication 2024-12-09 15:33:02.041 - info: node-red.0 (741) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js 2024-12-09 15:33:02.059 - info: node-red.0 (741) Node-RED started successfully (PID: 779) 2024-12-09 15:33:16.464 - warn: node-red.0 (741) Node-RED: 9 Dec 15:33:16 - [info] User directory : /opt/iobroker/iobroker-data/node-red/ 9 Dec 15:33:16 - [warn] Projects disabled : editorTheme.projects.enabled=false 2024-12-09 15:33:16.571 - warn: node-red.0 (741) Node-RED: 9 Dec 15:33:16 - [warn] Encrypted credentials not found============ Mark until here for C&P =============
iob diag has finished.
-
@thomas-braun sagte in Fehler bei node red auf dem slave:
@hant0r sagte in Fehler bei node red auf dem slave:
Ist das normal?
Natürlich nicht.
Das dachte ich mir auch. Finde bisher im Netz aber keine Lösung
-
@thomas-braun sagte in Fehler bei node red auf dem slave:
@hant0r sagte in Fehler bei node red auf dem slave:
Ist das normal?
Natürlich nicht.
Das dachte ich mir auch. Finde bisher im Netz aber keine Lösung
Bei dem 'Fehler'bild würde ich es nochmal langsam und in Ruhe installieren.
Auf dem RPi3 dauert eine simple Installation nur des Basissystems auch schon mal gerne eine Stunde. -
Bei dem 'Fehler'bild würde ich es nochmal langsam und in Ruhe installieren.
Auf dem RPi3 dauert eine simple Installation nur des Basissystems auch schon mal gerne eine Stunde.@thomas-braun sagte in Fehler bei node red auf dem slave:
Bei dem 'Fehler'bild würde ich es nochmal langsam und in Ruhe installieren.
Auf dem RPi3 dauert eine simple Installation nur des Basissystems auch schon mal gerne eine Stunde.Das habe ich nun zweimal (nach Anleitung) gemacht.
Da die Fehler aber schon nach dem ersten Booten bzw. dem absetzen vom upgrade Befehl kommt, hängt es vielleicht am Image!? -
@thomas-braun sagte in Fehler bei node red auf dem slave:
Bei dem 'Fehler'bild würde ich es nochmal langsam und in Ruhe installieren.
Auf dem RPi3 dauert eine simple Installation nur des Basissystems auch schon mal gerne eine Stunde.Das habe ich nun zweimal (nach Anleitung) gemacht.
Da die Fehler aber schon nach dem ersten Booten bzw. dem absetzen vom upgrade Befehl kommt, hängt es vielleicht am Image!?@hant0r sagte in Fehler bei node red auf dem slave:
(nach Anleitung)
Welche Anleitung?
Und welches Image?Danach:
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht
kann man da eigentlich gar nicht viel falsch machen.
-
@hant0r sagte in Fehler bei node red auf dem slave:
(nach Anleitung)
Welche Anleitung?
Und welches Image?Danach:
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht
kann man da eigentlich gar nicht viel falsch machen.
@thomas-braun sagte in Fehler bei node red auf dem slave:
@hant0r sagte in Fehler bei node red auf dem slave:
(nach Anleitung)
Welche Anleitung?
Und welches Image?Die von oben: https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht
und installiert habe ich das "Pi OS Lite (64-Bit)"
-
Habe das System nun mehrfach neu aufgesetzt, auch mit älteren Images von Pi OS Lite.
Aber es gibt immer Fehler beim Updaten der Sorucen. Verstehe es nicht, wie es bei einer frischen Installation dazu kommen kann.
Bin langsam mit dem Latain am Ende. :( -
Habe das System nun mehrfach neu aufgesetzt, auch mit älteren Images von Pi OS Lite.
Aber es gibt immer Fehler beim Updaten der Sorucen. Verstehe es nicht, wie es bei einer frischen Installation dazu kommen kann.
Bin langsam mit dem Latain am Ende. :(@hant0r sagte in Fehler bei node red auf dem slave:
Verstehe es nicht, wie es bei einer frischen Installation dazu kommen kann.
Ich auch nicht. Hab das auch noch nie gehabt bei mir.
Datenträger frisch und unverbraucht? -
@hant0r sagte in Fehler bei node red auf dem slave:
Verstehe es nicht, wie es bei einer frischen Installation dazu kommen kann.
Ich auch nicht. Hab das auch noch nie gehabt bei mir.
Datenträger frisch und unverbraucht?@thomas-braun sagte in Fehler bei node red auf dem slave:
@hant0r sagte in Fehler bei node red auf dem slave:
Verstehe es nicht, wie es bei einer frischen Installation dazu kommen kann.
Datenträger frisch und unverbraucht?
Ne, ist die, die seit vier Jahren da drin ist. Ich probiere aber auch mal eine andere Speicherkarte aus
Meistens kommt am Ende vom
upgradeder Fehler:E: Sub-process /usr/bin/dpkg returned an error code (1) -
@thomas-braun sagte in Fehler bei node red auf dem slave:
@hant0r sagte in Fehler bei node red auf dem slave:
Verstehe es nicht, wie es bei einer frischen Installation dazu kommen kann.
Datenträger frisch und unverbraucht?
Ne, ist die, die seit vier Jahren da drin ist. Ich probiere aber auch mal eine andere Speicherkarte aus
Meistens kommt am Ende vom
upgradeder Fehler:E: Sub-process /usr/bin/dpkg returned an error code (1)Dann schick erstmal eine frische SD-Karte ins Rennen.
992
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge
ioBroker Community 2014-2025
